summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2017-09-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds29-125/+206
Pull networking fixes from David Miller: 1) Fix NAPI poll list corruption in enic driver, from Christian Lamparter. 2) Fix route use after free, from Eric Dumazet. 3) Fix regression in reuseaddr handling, from Josef Bacik. 4) Assert the size of control messages in compat handling since we copy it in from userspace twice. From Meng Xu. 5) SMC layer bug fixes (missing RCU locking, bad refcounting, etc.) from Ursula Braun. 6) Fix races in AF_PACKET fanout handling, from Willem de Bruijn. 7) Don't use ARRAY_SIZE on spinlock array which might have zero entries, from Geert Uytterhoeven. 8) Fix miscomputation of checksum in ipv6 udp code, from Subash Abhinov Kasiviswanathan. 9) Push the ipv6 header properly in ipv6 GRE tunnel driver, from Xin Long. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (75 commits) inet: fix improper empty comparison net: use inet6_rcv_saddr to compare sockets net: set tb->fast_sk_family net: orphan frags on stand-alone ptype in dev_queue_xmit_nit MAINTAINERS: update git tree locations for ieee802154 subsystem net: prevent dst uses after free net: phy: Fix truncation of large IRQ numbers in phy_attached_print() net/smc: no close wait in case of process shut down net/smc: introduce a delay net/smc: terminate link group if out-of-sync is received net/smc: longer delay for client link group removal net/smc: adapt send request completion notification net/smc: adjust net_device refcount net/smc: take RCU read lock for routing cache lookup net/smc: add receive timeout check net/smc: add missing dev_put net: stmmac: Cocci spatch "of_table" lan78xx: Use default values loaded from EEPROM/OTP after reset lan78xx: Allow EEPROM write for less than MAX_EEPROM_SIZE lan78xx: Fix for eeprom read/write when device auto suspend ...
2017-09-22inet: fix improper empty comparisonJosef Bacik1-1/+1
When doing my reuseport rework I screwed up and changed a if (hlist_empty(&tb->owners)) to if (!hlist_empty(&tb->owners)) This is obviously bad as all of the reuseport/reuse logic was reversed, which caused weird problems like allowing an ipv4 bind conflict if we opened an ipv4 only socket on a port followed by an ipv6 only socket on the same port. Fixes: b9470c27607b ("inet: kill smallest_size and smallest_port") Reported-by: Cole Robinson <crobinso@redhat.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-22net: use inet6_rcv_saddr to compare socketsJosef Bacik1-1/+1
In ipv6_rcv_saddr_equal() we need to use inet6_rcv_saddr(sk) for the ipv6 compare with the fast socket information to make sure we're doing the proper comparisons. Fixes: 637bc8bbe6c0 ("inet: reset tb->fastreuseport when adding a reuseport sk") Reported-and-tested-by: Cole Robinson <crobinso@redhat.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-22net: set tb->fast_sk_familyJosef Bacik1-0/+2
We need to set the tb->fast_sk_family properly so we can use the proper comparison function for all subsequent reuseport bind requests. Fixes: 637bc8bbe6c0 ("inet: reset tb->fastreuseport when adding a reuseport sk") Reported-and-tested-by: Cole Robinson <crobinso@redhat.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-22net: orphan frags on stand-alone ptype in dev_queue_xmit_nitWillem de Bruijn1-2/+6
Zerocopy skbs frags are copied when the skb is looped to a local sock. Commit 1080e512d44d ("net: orphan frags on receive") introduced calls to skb_orphan_frags to deliver_skb and __netif_receive_skb for this. With msg_zerocopy, these skbs can also exist in the tx path and thus loop from dev_queue_xmit_nit. This already calls deliver_skb in its loop. But it does not orphan before a separate pt_prev->func(). Add the missing skb_orphan_frags_rx. Changes v1->v2: handle skb_orphan_frags_rx failure Fixes: 1f8b977ab32d ("sock: enable MSG_ZEROCOPY") Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-21net/smc: no close wait in case of process shut downUrsula Braun1-7/+8
Usually socket closing is delayed if there is still data available in the send buffer to be transmitted. If a process is killed, the delay should be avoided. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-21net/smc: introduce a delayUrsula Braun3-10/+16
The number of outstanding work requests is limited. If all work requests are in use, tx processing is postponed to another scheduling of the tx worker. Switch to a delayed worker to have a gap for tx completion queue events before the next retry. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-21net/smc: terminate link group if out-of-sync is receivedUrsula Braun3-11/+8
An out-of-sync condition can just be detected by the client. If the server receives a CLC DECLINE message indicating an out-of-sync condition for the link groups, the server must clean up the out-of-sync link group. There is no need for an extra third parameter in smc_clc_send_decline(). Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-21net/smc: longer delay for client link group removalUrsula Braun1-4/+12
Client link group creation always follows the server linkgroup creation. If peer creates a new server link group, client has to create a new client link group. If peer reuses a server link group for a new connection, client has to reuse its client link group as well. This patch introduces a longer delay for client link group removal to make sure this link group still exists, once the peer decides to reuse a server link group. This avoids out-of-sync conditions for link groups. If already scheduled, modify the delay. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-21net/smc: adapt send request completion notificationUrsula Braun1-1/+1
The solicited flag is meaningful for the receive completion queue. Ask for next work completion of any type on the send queue. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-21net/smc: adjust net_device refcountUrsula Braun1-1/+3
smc_pnet_fill_entry() uses dev_get_by_name() adding a refcount to ndev. The following smc_pnet_enter() has to reduce the refcount if the entry to be added exists already in the pnet table. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-21net/smc: take RCU read lock for routing cache lookupUrsula Braun1-3/+7
smc_netinfo_by_tcpsk() looks up the routing cache. Such a lookup requires protection by an RCU read lock. Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-21net/smc: add receive timeout checkHans Wippel1-0/+2
The SMC receive function currently lacks a timeout check under the condition that no data were received and no data are available. This patch adds such a check. Signed-off-by: Hans Wippel <hwippel@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-21net/smc: add missing dev_putHans Wippel1-0/+1
In the infiniband part, SMC currently uses get_netdev which calls dev_hold on the returned net device. However, the SMC code never calls dev_put on that net device resulting in a wrong reference count. This patch adds a dev_put after the usage of the net device to fix the issue. Signed-off-by: Hans Wippel <hwippel@linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-21net: ethtool: Add back transceiver typeFlorian Fainelli1-0/+2
Commit 3f1ac7a700d0 ("net: ethtool: add new ETHTOOL_xLINKSETTINGS API") deprecated the ethtool_cmd::transceiver field, which was fine in premise, except that the PHY library was actually using it to report the type of transceiver: internal or external. Use the first word of the reserved field to put this __u8 transceiver field back in. It is made read-only, and we don't expect the ETHTOOL_xLINKSETTINGS API to be doing anything with this anyway, so this is mostly for the legacy path where we do: ethtool_get_settings() -> dev->ethtool_ops->get_link_ksettings() -> convert_link_ksettings_to_legacy_settings() to have no information loss compared to the legacy get_settings API. Fixes: 3f1ac7a700d0 ("net: ethtool: add new ETHTOOL_xLINKSETTINGS API") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-21net_sched: remove cls_flower idr on failureCong Wang1-6/+9
Fixes: c15ab236d69d ("net/sched: Change cls_flower to use IDR") Cc: Chris Mi <chrism@mellanox.com> Cc: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-21net_sched/hfsc: fix curve activation in hfsc_change_class()Konstantin Khlebnikov1-4/+19
If real-time or fair-share curves are enabled in hfsc_change_class() class isn't inserted into rb-trees yet. Thus init_ed() and init_vf() must be called in place of update_ed() and update_vf(). Remove isn't required because for now curves cannot be disabled. Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-21net_sched: always reset qdisc backlog in qdisc_reset()Konstantin Khlebnikov1-0/+1
SKB stored in qdisc->gso_skb also counted into backlog. Some qdiscs don't reset backlog to zero in ->reset(), for example sfq just dequeue and free all queued skb. Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Fixes: 2ccccf5fb43f ("net_sched: update hierarchical backlog too") Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller2-7/+19
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains two Netfilter fixes for your net tree, they are: 1) Fix NAt compilation with UP, from Geert Uytterhoeven. 2) Fix incorrect number of entries when dumping a set, from Vishwanath Pai. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20net: change skb->mac_header when Generic XDP calls adjust_headEdward Cree1-0/+1
Since XDP's view of the packet includes the MAC header, moving the start- of-packet with bpf_xdp_adjust_head needs to also update the offset of the MAC header (which is relative to skb->head, not to the skb->data that was changed). Without this, tcpdump sees packets starting from the old MAC header rather than the new one, at least in my tests on the loopback device. Fixes: b5cdae3291f7 ("net: Generic XDP") Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20net: compat: assert the size of cmsg copied in is as expectedMeng Xu1-0/+7
The actual length of cmsg fetched in during the second loop (i.e., kcmsg - kcmsg_base) could be different from what we get from the first loop (i.e., kcmlen). The main reason is that the two get_user() calls in the two loops (i.e., get_user(ucmlen, &ucmsg->cmsg_len) and __get_user(ucmlen, &ucmsg->cmsg_len)) could cause ucmlen to have different values even they fetch from the same userspace address, as user can race to change the memory content in &ucmsg->cmsg_len across fetches. Although in the second loop, the sanity check if ((char *)kcmsg_base + kcmlen - (char *)kcmsg < CMSG_ALIGN(tmp)) is inplace, it only ensures that the cmsg fetched in during the second loop does not exceed the length of kcmlen, but not necessarily equal to kcmlen. But indicated by the assignment kmsg->msg_controllen = kcmlen, we should enforce that. This patch adds this additional sanity check and ensures that what is recorded in kmsg->msg_controllen is the actual cmsg length. Signed-off-by: Meng Xu <mengxu.gatech@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20packet: hold bind lock when rebinding to fanout hookWillem de Bruijn1-5/+11
Packet socket bind operations must hold the po->bind_lock. This keeps po->running consistent with whether the socket is actually on a ptype list to receive packets. fanout_add unbinds a socket and its packet_rcv/tpacket_rcv call, then binds the fanout object to receive through packet_rcv_fanout. Make it hold the po->bind_lock when testing po->running and rebinding. Else, it can race with other rebind operations, such as that in packet_set_ring from packet_rcv to tpacket_rcv. Concurrent updates can result in a socket being added to a fanout group twice, causing use-after-free KASAN bug reports, among others. Reported independently by both trinity and syzkaller. Verified that the syzkaller reproducer passes after this patch. Fixes: dc99f600698d ("packet: Add fanout support.") Reported-by: nixioaming <nixiaoming@huawei.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19ipv6: fix net.ipv6.conf.all interface DAD handlersMatteo Croce1-7/+20
Currently, writing into net.ipv6.conf.all.{accept_dad,use_optimistic,optimistic_dad} has no effect. Fix handling of these flags by: - using the maximum of global and per-interface values for the accept_dad flag. That is, if at least one of the two values is non-zero, enable DAD on the interface. If at least one value is set to 2, enable DAD and disable IPv6 operation on the interface if MAC-based link-local address was found - using the logical OR of global and per-interface values for the optimistic_dad flag. If at least one of them is set to one, optimistic duplicate address detection (RFC 4429) is enabled on the interface - using the logical OR of global and per-interface values for the use_optimistic flag. If at least one of them is set to one, optimistic addresses won't be marked as deprecated during source address selection on the interface. While at it, as we're modifying the prototype for ipv6_use_optimistic_addr(), drop inline, and let the compiler decide. Fixes: 7fd2561e4ebd ("net: ipv6: Add a sysctl to make optimistic addresses useful candidates") Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19net: ipv6: fix regression of no RTM_DELADDR sent after DAD failureMike Manning1-2/+3
Commit f784ad3d79e5 ("ipv6: do not send RTM_DELADDR for tentative addresses") incorrectly assumes that no RTM_NEWADDR are sent for addresses in tentative state, as this does happen for the standard IPv6 use-case of DAD failure, see the call to ipv6_ifa_notify() in addconf_dad_stop(). So as a result of this change, no RTM_DELADDR is sent after DAD failure for a link-local when strict DAD (accept_dad=2) is configured, or on the next admin down in other cases. The absence of this notification breaks backwards compatibility and causes problems after DAD failure if this notification was being relied on. The solution is to allow RTM_DELADDR to still be sent after DAD failure. Fixes: f784ad3d79e5 ("ipv6: do not send RTM_DELADDR for tentative addresses") Signed-off-by: Mike Manning <mmanning@brocade.com> Cc: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19bpf: fix ri->map_owner pointer on bpf_prog_reallocDaniel Borkmann1-9/+15
Commit 109980b894e9 ("bpf: don't select potentially stale ri->map from buggy xdp progs") passed the pointer to the prog itself to be loaded into r4 prior on bpf_redirect_map() helper call, so that we can store the owner into ri->map_owner out of the helper. Issue with that is that the actual address of the prog is still subject to change when subsequent rewrites occur that require slow path in bpf_prog_realloc() to alloc more memory, e.g. from patching inlining helper functions or constant blinding. Thus, we really need to take prog->aux as the address we're holding, which also works with prog clones as they share the same aux object. Instead of then fetching aux->prog during runtime, which could potentially incur cache misses due to false sharing, we are going to just use aux for comparison on the map owner. This will also keep the patchlet of the same size, and later check in xdp_map_invalid() only accesses read-only aux pointer from the prog, it's also in the same cacheline already from prior access when calling bpf_func. Fixes: 109980b894e9 ("bpf: don't select potentially stale ri->map from buggy xdp progs") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19tcp: fastopen: fix on syn-data transmit failureEric Dumazet1-0/+9
Our recent change exposed a bug in TCP Fastopen Client that syzkaller found right away [1] When we prepare skb with SYN+DATA, we attempt to transmit it, and we update socket state as if the transmit was a success. In socket RTX queue we have two skbs, one with the SYN alone, and a second one containing the DATA. When (malicious) ACK comes in, we now complain that second one had no skb_mstamp. The proper fix is to make sure that if the transmit failed, we do not pretend we sent the DATA skb, and make it our send_head. When 3WHS completes, we can now send the DATA right away, without having to wait for a timeout. [1] WARNING: CPU: 0 PID: 100189 at net/ipv4/tcp_input.c:3117 tcp_clean_rtx_queue+0x2057/0x2ab0 net/ipv4/tcp_input.c:3117() WARN_ON_ONCE(last_ackt == 0); Modules linked in: CPU: 0 PID: 100189 Comm: syz-executor1 Not tainted Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 0000000000000000 ffff8800b35cb1d8 ffffffff81cad00d 0000000000000000 ffffffff828a4347 ffff88009f86c080 ffffffff8316eb20 0000000000000d7f ffff8800b35cb220 ffffffff812c33c2 ffff8800baad2440 00000009d46575c0 Call Trace: [<ffffffff81cad00d>] __dump_stack [<ffffffff81cad00d>] dump_stack+0xc1/0x124 [<ffffffff812c33c2>] warn_slowpath_common+0xe2/0x150 [<ffffffff812c361e>] warn_slowpath_null+0x2e/0x40 [<ffffffff828a4347>] tcp_clean_rtx_queue+0x2057/0x2ab0 n [<ffffffff828ae6fd>] tcp_ack+0x151d/0x3930 [<ffffffff828baa09>] tcp_rcv_state_process+0x1c69/0x4fd0 [<ffffffff828efb7f>] tcp_v4_do_rcv+0x54f/0x7c0 [<ffffffff8258aacb>] sk_backlog_rcv [<ffffffff8258aacb>] __release_sock+0x12b/0x3a0 [<ffffffff8258ad9e>] release_sock+0x5e/0x1c0 [<ffffffff8294a785>] inet_wait_for_connect [<ffffffff8294a785>] __inet_stream_connect+0x545/0xc50 [<ffffffff82886f08>] tcp_sendmsg_fastopen [<ffffffff82886f08>] tcp_sendmsg+0x2298/0x35a0 [<ffffffff82952515>] inet_sendmsg+0xe5/0x520 [<ffffffff8257152f>] sock_sendmsg_nosec [<ffffffff8257152f>] sock_sendmsg+0xcf/0x110 Fixes: 8c72c65b426b ("tcp: update skb->skb_mstamp more carefully") Fixes: 783237e8daf1 ("net-tcp: Fast Open client - sending SYN-data") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-19libceph: don't allow bidirectional swap of pg-upmap-itemsIlya Dryomov1-10/+25
This reverts most of commit f53b7665c8ce ("libceph: upmap semantic changes"). We need to prevent duplicates in the final result. For example, we can currently take [1,2,3] and apply [(1,2)] and get [2,2,3] or [1,2,3] and apply [(3,2)] and get [1,2,2] The rest of the system is not prepared to handle duplicates in the result set like this. The reverted piece was intended to allow [1,2,3] and [(1,2),(2,1)] to get [2,1,3] to reorder primaries. First, this bidirectional swap is hard to implement in a way that also prevents dups. For example, [1,2,3] and [(1,4),(2,3),(3,4)] would give [4,3,4] but would we just drop the last step we'd have [4,3,3] which is also invalid, etc. Simpler to just not handle bidirectional swaps. In practice, they are not needed: if you just want to choose a different primary then use primary_affinity, or pg_upmap (not pg_upmap_items). Cc: stable@vger.kernel.org # 4.13 Link: http://tracker.ceph.com/issues/21410 Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Sage Weil <sage@redhat.com>
2017-09-19Merge tag 'mac80211-for-davem-2017-11-19' of ↵David S. Miller1-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Just two netlink fixes, both allowing privileged users to crash the kernel with malformed netlink messages. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-18tcp: remove two unused functionsYuchung Cheng1-34/+0
remove tcp_may_send_now and tcp_snd_test that are no longer used Fixes: 840a3cbe8969 ("tcp: remove forward retransmit feature") Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-18net/sched: cls_matchall: fix crash when used with classful qdiscDavide Caratti1-0/+1
this script, edited from Linux Advanced Routing and Traffic Control guide tc q a dev en0 root handle 1: htb default a tc c a dev en0 parent 1: classid 1:1 htb rate 6mbit burst 15k tc c a dev en0 parent 1:1 classid 1:a htb rate 5mbit ceil 6mbit burst 15k tc c a dev en0 parent 1:1 classid 1:b htb rate 1mbit ceil 6mbit burst 15k tc f a dev en0 parent 1:0 prio 1 $clsname $clsargs classid 1:b ping $address -c1 tc -s c s dev en0 classifies traffic to 1:b or 1:a, depending on whether the packet matches or not the pattern $clsargs of filter $clsname. However, when $clsname is 'matchall', a systematic crash can be observed in htb_classify(). HTB and classful qdiscs don't assign initial value to struct tcf_result, but then they expect it to contain valid values after filters have been run. Thus, current 'matchall' ignores the TCA_MATCHALL_CLASSID attribute, configured by user, and makes HTB (and classful qdiscs) dereference random pointers. By assigning head->res to *res in mall_classify(), before the actions are invoked, we fix this crash and enable TCA_MATCHALL_CLASSID functionality, that had no effect on 'matchall' classifier since its first introduction. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1460213 Reported-by: Jiri Benc <jbenc@redhat.com> Fixes: b87f7936a932 ("net/sched: introduce Match-all classifier") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-18ip6_tunnel: do not allow loading ip6_tunnel if ipv6 is disabled in cmdlineXin Long1-0/+3
If ipv6 has been disabled from cmdline since kernel started, it makes no sense to allow users to create any ip6 tunnel. Otherwise, it could some potential problem. Jianlin found a kernel crash caused by this in ip6_gre when he set ipv6.disable=1 in grub: [ 209.588865] Unable to handle kernel paging request for data at address 0x00000080 [ 209.588872] Faulting instruction address: 0xc000000000a3aa6c [ 209.588879] Oops: Kernel access of bad area, sig: 11 [#1] [ 209.589062] NIP [c000000000a3aa6c] fib_rules_lookup+0x4c/0x260 [ 209.589071] LR [c000000000b9ad90] fib6_rule_lookup+0x50/0xb0 [ 209.589076] Call Trace: [ 209.589097] fib6_rule_lookup+0x50/0xb0 [ 209.589106] rt6_lookup+0xc4/0x110 [ 209.589116] ip6gre_tnl_link_config+0x214/0x2f0 [ip6_gre] [ 209.589125] ip6gre_newlink+0x138/0x3a0 [ip6_gre] [ 209.589134] rtnl_newlink+0x798/0xb80 [ 209.589142] rtnetlink_rcv_msg+0xec/0x390 [ 209.589151] netlink_rcv_skb+0x138/0x150 [ 209.589159] rtnetlink_rcv+0x48/0x70 [ 209.589169] netlink_unicast+0x538/0x640 [ 209.589175] netlink_sendmsg+0x40c/0x480 [ 209.589184] ___sys_sendmsg+0x384/0x4e0 [ 209.589194] SyS_sendmsg+0xd4/0x140 [ 209.589201] SyS_socketcall+0x3e0/0x4f0 [ 209.589209] system_call+0x38/0xe0 This patch is to return -EOPNOTSUPP in ip6_tunnel_init if ipv6 has been disabled from cmdline. Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-18ip6_gre: skb_push ipv6hdr before packing the header in ip6gre_headerXin Long1-10/+11
Now in ip6gre_header before packing the ipv6 header, it skb_push t->hlen which only includes encap_hlen + tun_hlen. It means greh and inner header would be over written by ipv6 stuff and ipv6h might have no chance to set up. Jianlin found this issue when using remote any on ip6_gre, the packets he captured on gre dev are truncated: 22:50:26.210866 Out ethertype IPv6 (0x86dd), length 120: truncated-ip6 -\ 8128 bytes missing!(flowlabel 0x92f40, hlim 0, next-header Options (0) \ payload length: 8192) ::1:2000:0 > ::1:0:86dd: HBH [trunc] ip-proto-128 \ 8184 It should also skb_push ipv6hdr so that ipv6h points to the right position to set ipv6 stuff up. This patch is to skb_push hlen + sizeof(*ipv6h) and also fix some indents in ip6gre_header. Fixes: c12b395a4664 ("gre: Support GRE over IPv6") Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-18nl80211: fix null-ptr dereference on invalid mesh configurationJohannes Berg1-0/+3
If TX rates are specified during mesh join, the channel must also be specified. Check the channel pointer to avoid a null pointer dereference if it isn't. Reported-by: Jouni Malinen <j@w1.fi> Fixes: 8564e38206de ("cfg80211: add checks for beacon rate, extend to mesh") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-09-18udpv6: Fix the checksum computation when HW checksum does not applySubash Abhinov Kasiviswanathan1-0/+1
While trying an ESP transport mode encryption for UDPv6 packets of datagram size 1436 with MTU 1500, checksum error was observed in the secondary fragment. This error occurs due to the UDP payload checksum being missed out when computing the full checksum for these packets in udp6_hwcsum_outgoing(). Fixes: d39d938c8228 ("ipv6: Introduce udpv6_send_skb()") Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-18netfilter: ipset: ipset list may return wrong member count for set with timeoutVishwanath Pai1-1/+13
Simple testcase: $ ipset create test hash:ip timeout 5 $ ipset add test 1.2.3.4 $ ipset add test 1.2.2.2 $ sleep 5 $ ipset l Name: test Type: hash:ip Revision: 5 Header: family inet hashsize 1024 maxelem 65536 timeout 5 Size in memory: 296 References: 0 Number of entries: 2 Members: We return "Number of entries: 2" but no members are listed. That is because mtype_list runs "ip_set_timeout_expired" and does not list the expired entries, but set->elements is never upated (until mtype_gc cleans it up later). Reviewed-by: Joshua Hunt <johunt@akamai.com> Signed-off-by: Vishwanath Pai <vpai@akamai.com> Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-09-18netfilter: nat: Do not use ARRAY_SIZE() on spinlocks to fix zero divGeert Uytterhoeven1-6/+6
If no spinlock debugging options (CONFIG_GENERIC_LOCKBREAK, CONFIG_DEBUG_SPINLOCK, CONFIG_DEBUG_LOCK_ALLOC) are enabled on a UP platform (e.g. m68k defconfig), arch_spinlock_t is an empty struct, hence using ARRAY_SIZE(nf_nat_locks) causes a division by zero: net/netfilter/nf_nat_core.c: In function ‘nf_nat_setup_info’: net/netfilter/nf_nat_core.c:432: warning: division by zero net/netfilter/nf_nat_core.c: In function ‘__nf_nat_cleanup_conntrack’: net/netfilter/nf_nat_core.c:535: warning: division by zero net/netfilter/nf_nat_core.c:537: warning: division by zero net/netfilter/nf_nat_core.c: In function ‘nf_nat_init’: net/netfilter/nf_nat_core.c:810: warning: division by zero net/netfilter/nf_nat_core.c:811: warning: division by zero net/netfilter/nf_nat_core.c:824: warning: division by zero Fix this by using the CONNTRACK_LOCKS definition instead. Suggested-by: Florian Westphal <fw@strlen.de> Fixes: 8073e960a03bf7b5 ("netfilter: nat: use keyed locks") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-09-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds15-109/+141
Pull networking fixes from David Miller: 1) Fix hotplug deadlock in hv_netvsc, from Stephen Hemminger. 2) Fix double-free in rmnet driver, from Dan Carpenter. 3) INET connection socket layer can double put request sockets, fix from Eric Dumazet. 4) Don't match collect metadata-mode tunnels if the device is down, from Haishuang Yan. 5) Do not perform TSO6/GSO on ipv6 packets with extensions headers in be2net driver, from Suresh Reddy. 6) Fix scaling error in gen_estimator, from Eric Dumazet. 7) Fix 64-bit statistics deadlock in systemport driver, from Florian Fainelli. 8) Fix use-after-free in sctp_sock_dump, from Xin Long. 9) Reject invalid BPF_END instructions in verifier, from Edward Cree. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits) mlxsw: spectrum_router: Only handle IPv4 and IPv6 events Documentation: link in networking docs tcp: fix data delivery rate bpf/verifier: reject BPF_ALU64|BPF_END sctp: do not mark sk dumped when inet_sctp_diag_fill returns err sctp: fix an use-after-free issue in sctp_sock_dump netvsc: increase default receive buffer size tcp: update skb->skb_mstamp more carefully net: ipv4: fix l3slave check for index returned in IP_PKTINFO net: smsc911x: Quieten netif during suspend net: systemport: Fix 64-bit stats deadlock net: vrf: avoid gcc-4.6 warning qed: remove unnecessary call to memset tg3: clean up redundant initialization of tnapi tls: make tls_sw_free_resources static sctp: potential read out of bounds in sctp_ulpevent_type_enabled() MAINTAINERS: review Renesas DT bindings as well net_sched: gen_estimator: fix scaling error in bytes/packets samples nfp: wait for the NSP resource to appear on boot nfp: wait for board state before talking to the NSP ...
2017-09-16tcp: fix data delivery rateEric Dumazet1-4/+3
Now skb->mstamp_skb is updated later, we also need to call tcp_rate_skb_sent() after the update is done. Fixes: 8c72c65b426b ("tcp: update skb->skb_mstamp more carefully") Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-15sctp: do not mark sk dumped when inet_sctp_diag_fill returns errXin Long1-1/+0
sctp_diag would not actually dump out sk/asoc if inet_sctp_diag_fill returns err, in which case it shouldn't mark sk dumped by setting cb->args[3] as 1 in sctp_sock_dump(). Otherwise, it could cause some asocs to have no parent's sk dumped in 'ss --sctp'. So this patch is to not set cb->args[3] when inet_sctp_diag_fill() returns err in sctp_sock_dump(). Fixes: 8f840e47f190 ("sctp: add the sctp_diag.c file") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-15sctp: fix an use-after-free issue in sctp_sock_dumpXin Long2-38/+34
Commit 86fdb3448cc1 ("sctp: ensure ep is not destroyed before doing the dump") tried to fix an use-after-free issue by checking !sctp_sk(sk)->ep with holding sock and sock lock. But Paolo noticed that endpoint could be destroyed in sctp_rcv without sock lock protection. It means the use-after-free issue still could be triggered when sctp_rcv put and destroy ep after sctp_sock_dump checks !ep, although it's pretty hard to reproduce. I could reproduce it by mdelay in sctp_rcv while msleep in sctp_close and sctp_sock_dump long time. This patch is to add another param cb_done to sctp_for_each_transport and dump ep->assocs with holding tsp after jumping out of transport's traversal in it to avoid this issue. It can also improve sctp diag dump to make it run faster, as no need to save sk into cb->args[5] and keep calling sctp_for_each_transport any more. This patch is also to use int * instead of int for the pos argument in sctp_for_each_transport, which could make postion increment only in sctp_for_each_transport and no need to keep changing cb->args[2] in sctp_sock_filter and sctp_sock_dump any more. Fixes: 86fdb3448cc1 ("sctp: ensure ep is not destroyed before doing the dump") Reported-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-15tcp: update skb->skb_mstamp more carefullyEric Dumazet1-7/+12
liujian reported a problem in TCP_USER_TIMEOUT processing with a patch in tcp_probe_timer() : https://www.spinics.net/lists/netdev/msg454496.html After investigations, the root cause of the problem is that we update skb->skb_mstamp of skbs in write queue, even if the attempt to send a clone or copy of it failed. One reason being a routing problem. This patch prevents this, solving liujian issue. It also removes a potential RTT miscalculation, since __tcp_retransmit_skb() is not OR-ing TCP_SKB_CB(skb)->sacked with TCPCB_EVER_RETRANS if a failure happens, but skb->skb_mstamp has been changed. A future ACK would then lead to a very small RTT sample and min_rtt would then be lowered to this too small value. Tested: # cat user_timeout.pkt --local_ip=192.168.102.64 0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 +0 `ifconfig tun0 192.168.102.64/16; ip ro add 192.0.2.1 dev tun0` +0 < S 0:0(0) win 0 <mss 1460> +0 > S. 0:0(0) ack 1 <mss 1460> +.1 < . 1:1(0) ack 1 win 65530 +0 accept(3, ..., ...) = 4 +0 setsockopt(4, SOL_TCP, TCP_USER_TIMEOUT, [3000], 4) = 0 +0 write(4, ..., 24) = 24 +0 > P. 1:25(24) ack 1 win 29200 +.1 < . 1:1(0) ack 25 win 65530 //change the ipaddress +1 `ifconfig tun0 192.168.0.10/16` +1 write(4, ..., 24) = 24 +1 write(4, ..., 24) = 24 +1 write(4, ..., 24) = 24 +1 write(4, ..., 24) = 24 +0 `ifconfig tun0 192.168.102.64/16` +0 < . 1:2(1) ack 25 win 65530 +0 `ifconfig tun0 192.168.0.10/16` +3 write(4, ..., 24) = -1 # ./packetdrill user_timeout.pkt Signed-off-by: Eric Dumazet <edumazet@googl.com> Reported-by: liujian <liujian56@huawei.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-15net: ipv4: fix l3slave check for index returned in IP_PKTINFODavid Ahern1-2/+6
rt_iif is only set to the actual egress device for the output path. The recent change to consider the l3slave flag when returning IP_PKTINFO works for local traffic (the correct device index is returned), but it broke the more typical use case of packets received from a remote host always returning the VRF index rather than the original ingress device. Update the fixup to consider l3slave and rt_iif actually getting set. Fixes: 1dfa76390bf05 ("net: ipv4: add check for l3slave for index returned in IP_PKTINFO") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-15nl80211: check for the required netlink attributes presenceVladis Dronov1-0/+3
nl80211_set_rekey_data() does not check if the required attributes NL80211_REKEY_DATA_{REPLAY_CTR,KEK,KCK} are present when processing NL80211_CMD_SET_REKEY_OFFLOAD request. This request can be issued by users with CAP_NET_ADMIN privilege and may result in NULL dereference and a system crash. Add a check for the required attributes presence. This patch is based on the patch by bo Zhang. This fixes CVE-2017-12153. References: https://bugzilla.redhat.com/show_bug.cgi?id=1491046 Fixes: e5497d766ad ("cfg80211/nl80211: support GTK rekey offload") Cc: <stable@vger.kernel.org> # v3.1-rc1 Reported-by: bo Zhang <zhangbo5891001@gmail.com> Signed-off-by: Vladis Dronov <vdronov@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-09-14Merge branch 'work.set_fs' of ↵Linus Torvalds1-9/+5
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull more set_fs removal from Al Viro: "Christoph's 'use kernel_read and friends rather than open-coding set_fs()' series" * 'work.set_fs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: unexport vfs_readv and vfs_writev fs: unexport vfs_read and vfs_write fs: unexport __vfs_read/__vfs_write lustre: switch to kernel_write gadget/f_mass_storage: stop messing with the address limit mconsole: switch to kernel_read btrfs: switch write_buf to kernel_write net/9p: switch p9_fd_read to kernel_write mm/nommu: switch do_mmap_private to kernel_read serial2002: switch serial2002_tty_write to kernel_{read/write} fs: make the buf argument to __kernel_write a void pointer fs: fix kernel_write prototype fs: fix kernel_read prototype fs: move kernel_read to fs/read_write.c fs: move kernel_write to fs/read_write.c autofs4: switch autofs4_write to __kernel_write ashmem: switch to ->read_iter
2017-09-14tls: make tls_sw_free_resources staticTobias Klauser1-1/+1
Make the needlessly global function tls_sw_free_resources static to fix a gcc/sparse warning. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-13net_sched: gen_estimator: fix scaling error in bytes/packets samplesEric Dumazet1-2/+2
Denys reported wrong rate estimations with HTB classes. It appears the bug was added in linux-4.10, since my tests where using intervals of one second only. HTB using 4 sec default rate estimators, reported rates were 4x higher. We need to properly scale the bytes/packets samples before integrating them in EWMA. Tested: echo 1 >/sys/module/sch_htb/parameters/htb_rate_est Setup HTB with one class with a rate/cail of 5Gbit Generate traffic on this class tc -s -d cl sh dev eth0 classid 7002:11 class htb 7002:11 parent 7002:1 prio 5 quantum 200000 rate 5Gbit ceil 5Gbit linklayer ethernet burst 80000b/1 mpu 0b cburst 80000b/1 mpu 0b level 0 rate_handle 1 Sent 1488215421648 bytes 982969243 pkt (dropped 0, overlimits 0 requeues 0) rate 5Gbit 412814pps backlog 136260b 2p requeues 0 TCP pkts/rtx 982969327/45 bytes 1488215557414/68130 lended: 22732826 borrowed: 0 giants: 0 tokens: -1684 ctokens: -1684 Fixes: 1c0d32fde5bd ("net_sched: gen_estimator: complete rewrite of rate estimators") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Denys Fedoryshchenko <nuclearcat@nuclearcat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-13net: sched: fix use-after-free in tcf_action_destroy and tcf_del_walkerJiri Pirko1-2/+4
Recent commit d7fb60b9cafb ("net_sched: get rid of tcfa_rcu") removed freeing in call_rcu, which changed already existing hard-to-hit race condition into 100% hit: [ 598.599825] BUG: unable to handle kernel NULL pointer dereference at 0000000000000030 [ 598.607782] IP: tcf_action_destroy+0xc0/0x140 Or: [ 40.858924] BUG: unable to handle kernel NULL pointer dereference at 0000000000000030 [ 40.862840] IP: tcf_generic_walker+0x534/0x820 Fix this by storing the ops and use them directly for module_put call. Fixes: a85a970af265 ("net_sched: move tc_action into tcf_common") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-12ip6_tunnel: fix ip6 tunnel lookup in collect_md modeHaishuang Yan1-1/+1
In collect_md mode, if the tun dev is down, it still can call __ip6_tnl_rcv to receive on packets, and the rx statistics increase improperly. When the md tunnel is down, it's not neccessary to increase RX drops for the tunnel device, packets would be recieved on fallback tunnel, and the RX drops on fallback device will be increased as expected. Fixes: 8d79266bc48c ("ip6_tunnel: add collect_md mode to IPv6 tunnels") Cc: Alexei Starovoitov <ast@fb.com> Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-12ip_tunnel: fix ip tunnel lookup in collect_md modeHaishuang Yan1-1/+1
In collect_md mode, if the tun dev is down, it still can call ip_tunnel_rcv to receive on packets, and the rx statistics increase improperly. When the md tunnel is down, it's not neccessary to increase RX drops for the tunnel device, packets would be recieved on fallback tunnel, and the RX drops on fallback device will be increased as expected. Fixes: 2e15ea390e6f ("ip_gre: Add support to collect tunnel metadata.") Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-12net_sched: carefully handle tcf_block_put()Cong Wang1-6/+18
As pointed out by Jiri, there is still a race condition between tcf_block_put() and tcf_chain_destroy() in a RCU callback. There is no way to make it correct without proper locking or synchronization, because both operate on a shared list. Locking is hard, because the only lock we can pick here is a spinlock, however, in tc_dump_tfilter() we iterate this list with a sleeping function called (tcf_chain_dump()), which makes using a lock to protect chain_list almost impossible. Jiri suggested the idea of holding a refcnt before flushing, this works because it guarantees us there would be no parallel tcf_chain_destroy() during the loop, therefore the race condition is gone. But we have to be very careful with proper synchronization with RCU callbacks. Suggested-by: Jiri Pirko <jiri@mellanox.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>