summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)AuthorFilesLines
2013-09-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2-5/+36
Pull networking fixes from David Miller: "A quick set of fixes, some to deal with fallout from yesterday's net-next merge. 1) Fix compilation of bnx2x driver with CONFIG_BNX2X_SRIOV disabled, from Dmitry Kravkov. 2) Fix a bnx2x regression caused by one of Dave Jones's mistaken braces changes, from Eilon Greenstein. 3) Add some protective filtering in the netlink tap code, from Daniel Borkmann. 4) Fix TCP congestion window growth regression after timeouts, from Yuchung Cheng. 5) Correctly adjust TCP's rcv_ssthresh for out of order packets, from Eric Dumazet" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: tcp: properly increase rcv_ssthresh for ofo packets net: add documentation for BQL helpers mlx5: remove unused MLX5_DEBUG param in Kconfig bnx2x: Restore a call to config_init bnx2x: fix broken compilation with CONFIG_BNX2X_SRIOV is not set tcp: fix no cwnd growth after timeout net: netlink: filter particular protocols from analyzers
2013-09-06tcp: properly increase rcv_ssthresh for ofo packetsEric Dumazet1-1/+4
TCP receive window handling is multi staged. A socket has a memory budget, static or dynamic, in sk_rcvbuf. Because we do not really know how this memory budget translates to a TCP window (payload), TCP announces a small initial window (about 20 MSS). When a packet is received, we increase TCP rcv_win depending on the payload/truesize ratio of this packet. Good citizen packets give a hint that it's reasonable to have rcv_win = sk_rcvbuf/2 This heuristic takes place in tcp_grow_window() Problem is : We currently call tcp_grow_window() only for in-order packets. This means that reorders or packet losses stop proper grow of rcv_win, and senders are unable to benefit from fast recovery, or proper reordering level detection. Really, a packet being stored in OFO queue is not a bad citizen. It should be part of the game as in-order packets. In our traces, we very often see sender is limited by linux small receive windows, even if linux hosts use autotuning (DRS) and should allow rcv_win to grow to ~3MB. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-06tcp: fix no cwnd growth after timeoutYuchung Cheng1-4/+2
In commit 0f7cc9a3 "tcp: increase throughput when reordering is high", it only allows cwnd to increase in Open state. This mistakenly disables slow start after timeout (CA_Loss). Moreover cwnd won't grow if the state moves from Disorder to Open later in tcp_fastretrans_alert(). Therefore the correct logic should be to allow cwnd to grow as long as the data is received in order in Open, Loss, or even Disorder state. Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-06net: netlink: filter particular protocols from analyzersDaniel Borkmann1-0/+30
Fix finer-grained control and let only a whitelist of allowed netlink protocols pass, in our case related to networking. If later on, other subsystems decide they want to add their protocol as well to the list of allowed protocols they shall simply add it. While at it, we also need to tell what protocol is in use otherwise BPF_S_ANC_PROTOCOL can not pick it up (as it's not filled out). Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-06Merge branch 'for-linus' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree from Jiri Kosina: "The usual trivial updates all over the tree -- mostly typo fixes and documentation updates" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (52 commits) doc: Documentation/cputopology.txt fix typo treewide: Convert retrun typos to return Fix comment typo for init_cma_reserved_pageblock Documentation/trace: Correcting and extending tracepoint documentation mm/hotplug: fix a typo in Documentation/memory-hotplug.txt power: Documentation: Update s2ram link doc: fix a typo in Documentation/00-INDEX Documentation/printk-formats.txt: No casts needed for u64/s64 doc: Fix typo "is is" in Documentations treewide: Fix printks with 0x%# zram: doc fixes Documentation/kmemcheck: update kmemcheck documentation doc: documentation/hwspinlock.txt fix typo PM / Hibernate: add section for resume options doc: filesystems : Fix typo in Documentations/filesystems scsi/megaraid fixed several typos in comments ppc: init_32: Fix error typo "CONFIG_START_KERNEL" treewide: Add __GFP_NOWARN to k.alloc calls with v.alloc fallbacks page_isolation: Fix a comment typo in test_pages_isolated() doc: fix a typo about irq affinity ...
2013-09-06Merge branch 'for-linus' of ↵Linus Torvalds1-5/+10
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID updates from Jiri Kosina: "Highlights: - conversion of HID subsystem to use devm-based resource management, from Benjamin Tissoires - i2c-hid support for DT bindings, from Benjamin Tissoires - much improved support for Win8-multitouch devices, from Benjamin Tissoires - cleanup of core code using common hidinput_input_event(), from David Herrmann - fix for bug in implement() access to the bit stream (causing oops) that has been present in the code for ages, but devices that are able to trigger it have started to appear only now, from Jiri Kosina - fixes for CVE-2013-2899, CVE-2013-2898, CVE-2013-2896, CVE-2013-2892, CVE-2013-2888 (all triggerable only by specially crafted malicious HW devices plugged into the system), from Kees Cook - hidraw oops fix, from Manoj Chourasia - various smaller fixes here and there, support for a bunch of new devices by various contributors" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (53 commits) HID: MAINTAINERS: add roccat drivers HID: hid-sensor-hub: change kmalloc + memcpy by kmemdup HID: hid-sensor-hub: move to devm_kzalloc HID: hid-sensor-hub: fix indentation accross the code HID: move HID_REPORT_TYPES closer to the report-definitions HID: check for NULL field when setting values HID: picolcd_core: validate output report details HID: sensor-hub: validate feature report details HID: ntrig: validate feature report details HID: pantherlord: validate output report details HID: hid-wiimote: print small buffers via %*phC HID: uhid: improve uhid example client HID: Correct the USB IDs for the new Macbook Air 6 HID: wiimote: add support for Guitar-Hero guitars HID: wiimote: add support for Guitar-Hero drums Input: introduce BTN/ABS bits for drums and guitars HID: battery: don't do DMA from stack HID: roccat: add support for KonePureOptical v2 HID: picolcd: Prevent NULL pointer dereference on _remove() HID: usbhid: quirk for N-Trig DuoSense Touch Screen ...
2013-09-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds255-4270/+10151
Pull networking changes from David Miller: "Noteworthy changes this time around: 1) Multicast rejoin support for team driver, from Jiri Pirko. 2) Centralize and simplify TCP RTT measurement handling in order to reduce the impact of bad RTO seeding from SYN/ACKs. Also, when both timestamps and local RTT measurements are available prefer the later because there are broken middleware devices which scramble the timestamp. From Yuchung Cheng. 3) Add TCP_NOTSENT_LOWAT socket option to limit the amount of kernel memory consumed to queue up unsend user data. From Eric Dumazet. 4) Add a "physical port ID" abstraction for network devices, from Jiri Pirko. 5) Add a "suppress" operation to influence fib_rules lookups, from Stefan Tomanek. 6) Add a networking development FAQ, from Paul Gortmaker. 7) Extend the information provided by tcp_probe and add ipv6 support, from Daniel Borkmann. 8) Use RCU locking more extensively in openvswitch data paths, from Pravin B Shelar. 9) Add SCTP support to openvswitch, from Joe Stringer. 10) Add EF10 chip support to SFC driver, from Ben Hutchings. 11) Add new SYNPROXY netfilter target, from Patrick McHardy. 12) Compute a rate approximation for sending in TCP sockets, and use this to more intelligently coalesce TSO frames. Furthermore, add a new packet scheduler which takes advantage of this estimate when available. From Eric Dumazet. 13) Allow AF_PACKET fanouts with random selection, from Daniel Borkmann. 14) Add ipv6 support to vxlan driver, from Cong Wang" Resolved conflicts as per discussion. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1218 commits) openvswitch: Fix alignment of struct sw_flow_key. netfilter: Fix build errors with xt_socket.c tcp: Add missing braces to do_tcp_setsockopt caif: Add missing braces to multiline if in cfctrl_linkup_request bnx2x: Add missing braces in bnx2x:bnx2x_link_initialize vxlan: Fix kernel panic on device delete. net: mvneta: implement ->ndo_do_ioctl() to support PHY ioctls net: mvneta: properly disable HW PHY polling and ensure adjust_link() works icplus: Use netif_running to determine device state ethernet/arc/arc_emac: Fix huge delays in large file copies tuntap: orphan frags before trying to set tx timestamp tuntap: purge socket error queue on detach qlcnic: use standard NAPI weights ipv6:introduce function to find route for redirect bnx2x: VF RSS support - VF side bnx2x: VF RSS support - PF side vxlan: Notify drivers for listening UDP port changes net: usbnet: update addr_assign_type if appropriate driver/net: enic: update enic maintainers and driver driver/net: enic: Exposing symbols for Cisco's low latency driver ...
2013-09-05openvswitch: Fix alignment of struct sw_flow_key.Jesse Gross2-1/+2
sw_flow_key alignment was declared as " __aligned(__alignof__(long))". However, this breaks on the m68k architecture where long is 32 bit in size but 16 bit aligned by default. This aligns to the size of a long to ensure that we can always do comparsions in full long-sized chunks. It also adds an additional build check to catch any reduction in alignment. CC: Andy Zhou <azhou@nicira.com> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller34-200/+439
Conflicts: drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c net/bridge/br_multicast.c net/ipv6/sit.c The conflicts were minor: 1) sit.c changes overlap with change to ip_tunnel_xmit() signature. 2) br_multicast.c had an overlap between computing max_delay using msecs_to_jiffies and turning MLDV2_MRC() into an inline function with a name using lowercase instead of uppercase letters. 3) stmmac had two overlapping changes, one which conditionally allocated and hooked up a dma_cfg based upon the presence of the pbl OF property, and another one handling store-and-forward DMA made. The latter of which should not go into the new of_find_property() basic block. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05netfilter: Fix build errors with xt_socket.cDavid S. Miller1-0/+1
As reported by Randy Dunlap: ==================== when CONFIG_IPV6=m and CONFIG_NETFILTER_XT_MATCH_SOCKET=y: net/built-in.o: In function `socket_mt6_v1_v2': xt_socket.c:(.text+0x51b55): undefined reference to `udp6_lib_lookup' net/built-in.o: In function `socket_mt_init': xt_socket.c:(.init.text+0x1ef8): undefined reference to `nf_defrag_ipv6_enable' ==================== Like several other modules under net/netfilter/ we have to have a dependency "IPV6 disabled or set compatibly with this module" clause. Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05tcp: Add missing braces to do_tcp_setsockoptDave Jones1-1/+2
Signed-off-by: Dave Jones <davej@fedoraproject.org> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05caif: Add missing braces to multiline if in cfctrl_linkup_requestDave Jones1-1/+2
The indentation here implies this was meant to be a multi-line if. Introduced several years back in commit c85c2951d4da1236e32f1858db418221e624aba5 ("caif: Handle dev_queue_xmit errors.") Signed-off-by: Dave Jones <davej@fedoraproject.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05ipv6:introduce function to find route for redirectDuan Jiong6-11/+81
RFC 4861 says that the IP source address of the Redirect is the same as the current first-hop router for the specified ICMP Destination Address, so the gateway should be taken into consideration when we find the route for redirect. There was once a check in commit a6279458c534d01ccc39498aba61c93083ee0372 ("NDISC: Search over all possible rules on receipt of redirect.") and the check went away in commit b94f1c0904da9b8bf031667afc48080ba7c3e8c9 ("ipv6: Use icmpv6_notify() to propagate redirect, instead of rt6_redirect()"). The bug is only "exploitable" on layer-2 because the source address of the redirect is checked to be a valid link-local address but it makes spoofing a lot easier in the same L2 domain nonetheless. Thanks very much for Hannes's help. Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05bridge: apply multicast snooping to IPv6 link-local, tooLinus Lüssing3-14/+6
The multicast snooping code should have matured enough to be safely applicable to IPv6 link-local multicast addresses (excluding the link-local all nodes address, ff02::1), too. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-05bridge: prevent flooding IPv6 packets that do not have a listenerLinus Lüssing1-2/+8
Currently if there is no listener for a certain group then IPv6 packets for that group are flooded on all ports, even though there might be no host and router interested in it on a port. With this commit they are only forwarded to ports with a multicast router. Just like commit bd4265fe36 ("bridge: Only flood unregistered groups to routers") did for IPv4, let's do the same for IPv6 with the same reasoning. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04Merge tag 'PTR_RET-for-linus' of ↵Linus Torvalds15-15/+15
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull PTR_RET() removal patches from Rusty Russell: "PTR_RET() is a weird name, and led to some confusing usage. We ended up with PTR_ERR_OR_ZERO(), and replacing or fixing all the usages. This has been sitting in linux-next for a whole cycle" [ There are still some PTR_RET users scattered about, with some of them possibly being new, but most of them existing in Rusty's tree too. We have that #define PTR_RET(p) PTR_ERR_OR_ZERO(p) thing in <linux/err.h>, so they continue to work for now - Linus ] * tag 'PTR_RET-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: GFS2: Replace PTR_RET with PTR_ERR_OR_ZERO Btrfs: volume: Replace PTR_RET with PTR_ERR_OR_ZERO drm/cma: Replace PTR_RET with PTR_ERR_OR_ZERO sh_veu: Replace PTR_RET with PTR_ERR_OR_ZERO dma-buf: Replace PTR_RET with PTR_ERR_OR_ZERO drivers/rtc: Replace PTR_RET with PTR_ERR_OR_ZERO mm/oom_kill: remove weird use of ERR_PTR()/PTR_ERR(). staging/zcache: don't use PTR_RET(). remoteproc: don't use PTR_RET(). pinctrl: don't use PTR_RET(). acpi: Replace weird use of PTR_RET. s390: Replace weird use of PTR_RET. PTR_RET is now PTR_ERR_OR_ZERO(): Replace most. PTR_RET is now PTR_ERR_OR_ZERO
2013-09-04net: ipv6: mld: introduce mld_{gq, ifc, dad}_stop_timer functionsDaniel Borkmann1-16/+25
We already have mld_{gq,ifc,dad}_start_timer() functions, so introduce mld_{gq,ifc,dad}_stop_timer() functions to reduce code size and make it more readable. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04net: ipv6: mld: refactor query processing into v1/v2 functionsDaniel Borkmann1-33/+56
Make igmp6_event_query() a bit easier to read by refactoring code parts into mld_process_v1() and mld_process_v2(). Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04net: ipv6: mld: similarly to MLDv2 have min max_delay of 1Daniel Borkmann1-7/+7
Similarly as we do in MLDv2 queries, set a forged MLDv1 query with 0 ms mld_maxdelay to minimum timer shot time of 1 jiffies. This is eventually done in igmp6_group_queried() anyway, so we can simplify a check there. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04net: ipv6: mld: implement RFC3810 MLDv2 mode onlyDaniel Borkmann1-4/+30
RFC3810, 10. Security Considerations says under subsection 10.1. Query Message: A forged Version 1 Query message will put MLDv2 listeners on that link in MLDv1 Host Compatibility Mode. This scenario can be avoided by providing MLDv2 hosts with a configuration option to ignore Version 1 messages completely. Hence, implement a MLDv2-only mode that will ignore MLDv1 traffic: echo 2 > /proc/sys/net/ipv6/conf/ethX/force_mld_version or echo 2 > /proc/sys/net/ipv6/conf/all/force_mld_version Note that <all> device has a higher precedence as it was previously also the case in the macro MLD_V1_SEEN() that would "short-circuit" if condition on <all> case. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04net: ipv6: mld: get rid of MLDV2_MRC and simplify calculationDaniel Borkmann2-17/+4
Get rid of MLDV2_MRC and use our new macros for mantisse and exponent to calculate Maximum Response Delay out of the Maximum Response Code. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04net: ipv6: mld: clean up MLD_V1_SEEN macroDaniel Borkmann1-13/+21
Replace the macro with a function to make it more readable. GCC will eventually decide whether to inline this or not (also, that's not fast-path anyway). Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04net: ipv6: mld: fix v1/v2 switchback timeout to rfc3810, 9.12.Daniel Borkmann1-6/+110
i) RFC3810, 9.2. Query Interval [QI] says: The Query Interval variable denotes the interval between General Queries sent by the Querier. Default value: 125 seconds. [...] ii) RFC3810, 9.3. Query Response Interval [QRI] says: The Maximum Response Delay used to calculate the Maximum Response Code inserted into the periodic General Queries. Default value: 10000 (10 seconds) [...] The number of seconds represented by the [Query Response Interval] must be less than the [Query Interval]. iii) RFC3810, 9.12. Older Version Querier Present Timeout [OVQPT] says: The Older Version Querier Present Timeout is the time-out for transitioning a host back to MLDv2 Host Compatibility Mode. When an MLDv1 query is received, MLDv2 hosts set their Older Version Querier Present Timer to [Older Version Querier Present Timeout]. This value MUST be ([Robustness Variable] times (the [Query Interval] in the last Query received)) plus ([Query Response Interval]). Hence, on *default* the timeout results in: [RV] = 2, [QI] = 125sec, [QRI] = 10sec [OVQPT] = [RV] * [QI] + [QRI] = 260sec Having that said, we currently calculate [OVQPT] (here given as 'switchback' variable) as ... switchback = (idev->mc_qrv + 1) * max_delay RFC3810, 9.12. says "the [Query Interval] in the last Query received". In section "9.14. Configuring timers", it is said: This section is meant to provide advice to network administrators on how to tune these settings to their network. Ambitious router implementations might tune these settings dynamically based upon changing characteristics of the network. [...] iv) RFC38010, 9.14.2. Query Interval: The overall level of periodic MLD traffic is inversely proportional to the Query Interval. A longer Query Interval results in a lower overall level of MLD traffic. The value of the Query Interval MUST be equal to or greater than the Maximum Response Delay used to calculate the Maximum Response Code inserted in General Query messages. I assume that was why switchback is calculated as is (3 * max_delay), although this setting seems to be meant for routers only to configure their [QI] interval for non-default intervals. So usage here like this is clearly wrong. Concluding, the current behaviour in IPv6's multicast code is not conform to the RFC as switch back is calculated wrongly. That is, it has a too small value, so MLDv2 hosts switch back again to MLDv2 way too early, i.e. ~30secs instead of ~260secs on default. Hence, introduce necessary helper functions and fix this up properly as it should be. Introduced in 06da92283 ("[IPV6]: Add MLDv2 support."). Credits to Hannes Frederic Sowa who also had a hand in this as well. Also thanks to Hangbin Liu who did initial testing. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: David Stevens <dlstevens@us.ibm.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04net: ipv6: tcp: fix potential use after free in tcp_v6_do_rcvDaniel Borkmann1-1/+1
In tcp_v6_do_rcv() code, when processing pkt options, we soley work on our skb clone opt_skb that we've created earlier before entering tcp_rcv_established() on our way. However, only in condition ... if (np->rxopt.bits.rxtclass) np->rcv_tclass = ipv6_get_dsfield(ipv6_hdr(skb)); ... we work on skb itself. As we extract every other information out of opt_skb in ipv6_pktoptions path, this seems wrong, since skb can already be released by tcp_rcv_established() earlier on. When we try to access it in ipv6_hdr(), we will dereference freed skb. [ Bug added by commit 4c507d2897bd9b ("net: implement IP_RECVTOS for IP_PKTOPTIONS") ] Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04tcp: better comments for RTO initiallizationYuchung Cheng1-6/+20
Commit 1b7fdd2ab585("tcp: do not use cached RTT for RTT estimation") removes important comments on how RTO is initialized and updated. Hopefully this patch puts those information back. Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04ipv6: Don't depend on per socket memory for neighbour discovery messagesThomas Graf1-6/+8
Allocating skbs when sending out neighbour discovery messages currently uses sock_alloc_send_skb() based on a per net namespace socket and thus share a socket wmem buffer space. If a netdevice is temporarily unable to transmit due to carrier loss or for other reasons, the queued up ndisc messages will cosnume all of the wmem space and will thus prevent from any more skbs to be allocated even for netdevices that are able to transmit packets. The number of neighbour discovery messages sent is very limited, use of alloc_skb() bypasses the socket wmem buffer size enforcement while the manual call to skb_set_owner_w() maintains the socket reference needed for the IPv6 output path. This patch has orginally been posted by Eric Dumazet in a modified form. Signed-off-by: Thomas Graf <tgraf@suug.ch> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Fabio Estevam <festevam@gmail.com> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Stephen Warren <swarren@nvidia.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04ipv6: fix null pointer dereference in __ip6addrlbl_addHannes Frederic Sowa1-25/+23
Commit b67bfe0d42cac56c512dd5da4b1b347a23f4b70a ("hlist: drop the node parameter from iterators") changed the behavior of hlist_for_each_entry_safe to leave the p argument NULL. Fix this up by tracking the last argument. Reported-by: Michele Baldessari <michele@acksyn.org> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Tested-by: Michele Baldessari <michele@acksyn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04net: sctp: Fix data chunk fragmentation for MTU values which are not ↵Alexander Sverdlin1-2/+2
multiple of 4 net: sctp: Fix data chunk fragmentation for MTU values which are not multiple of 4 Initially the problem was observed with ipsec, but later it became clear that SCTP data chunk fragmentation algorithm has problems with MTU values which are not multiple of 4. Test program was used which just transmits 2000 bytes long packets to other host. tcpdump was used to observe re-fragmentation in IP layer after SCTP already fragmented data chunks. With MTU 1500: 12:54:34.082904 IP (tos 0x2,ECT(0), ttl 64, id 0, offset 0, flags [DF], proto SCTP (132), length 1500) 10.151.38.153.39303 > 10.151.24.91.54321: sctp (1) [DATA] (B) [TSN: 2366088589] [SID: 0] [SSEQ 1] [PPID 0x0] 12:54:34.082933 IP (tos 0x2,ECT(0), ttl 64, id 0, offset 0, flags [DF], proto SCTP (132), length 596) 10.151.38.153.39303 > 10.151.24.91.54321: sctp (1) [DATA] (E) [TSN: 2366088590] [SID: 0] [SSEQ 1] [PPID 0x0] 12:54:34.090576 IP (tos 0x2,ECT(0), ttl 63, id 0, offset 0, flags [DF], proto SCTP (132), length 48) 10.151.24.91.54321 > 10.151.38.153.39303: sctp (1) [SACK] [cum ack 2366088590] [a_rwnd 79920] [#gap acks 0] [#dup tsns 0] With MTU 1499: 13:02:49.955220 IP (tos 0x2,ECT(0), ttl 64, id 48215, offset 0, flags [+], proto SCTP (132), length 1492) 10.151.38.153.39084 > 10.151.24.91.54321: sctp[|sctp] 13:02:49.955249 IP (tos 0x2,ECT(0), ttl 64, id 48215, offset 1472, flags [none], proto SCTP (132), length 28) 10.151.38.153 > 10.151.24.91: ip-proto-132 13:02:49.955262 IP (tos 0x2,ECT(0), ttl 64, id 0, offset 0, flags [DF], proto SCTP (132), length 600) 10.151.38.153.39084 > 10.151.24.91.54321: sctp (1) [DATA] (E) [TSN: 404355346] [SID: 0] [SSEQ 1] [PPID 0x0] 13:02:49.956770 IP (tos 0x2,ECT(0), ttl 63, id 0, offset 0, flags [DF], proto SCTP (132), length 48) 10.151.24.91.54321 > 10.151.38.153.39084: sctp (1) [SACK] [cum ack 404355346] [a_rwnd 79920] [#gap acks 0] [#dup tsns 0] Here problem in data portion limit calculation leads to re-fragmentation in IP, which is sub-optimal. The problem is max_data initial value, which doesn't take into account the fact, that data chunk must be padded to 4-bytes boundary. It's enough to correct max_data, because all later adjustments are correctly aligned to 4-bytes boundary. After the fix is applied, everything is fragmented correctly for uneven MTUs: 15:16:27.083881 IP (tos 0x2,ECT(0), ttl 64, id 0, offset 0, flags [DF], proto SCTP (132), length 1496) 10.151.38.153.53417 > 10.151.24.91.54321: sctp (1) [DATA] (B) [TSN: 3077098183] [SID: 0] [SSEQ 1] [PPID 0x0] 15:16:27.083907 IP (tos 0x2,ECT(0), ttl 64, id 0, offset 0, flags [DF], proto SCTP (132), length 600) 10.151.38.153.53417 > 10.151.24.91.54321: sctp (1) [DATA] (E) [TSN: 3077098184] [SID: 0] [SSEQ 1] [PPID 0x0] 15:16:27.085640 IP (tos 0x2,ECT(0), ttl 63, id 0, offset 0, flags [DF], proto SCTP (132), length 48) 10.151.24.91.54321 > 10.151.38.153.53417: sctp (1) [SACK] [cum ack 3077098184] [a_rwnd 79920] [#gap acks 0] [#dup tsns 0] The bug was there for years already, but - is a performance issue, the packets are still transmitted - doesn't show up with default MTU 1500, but possibly with ipsec (MTU 1438) Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nsn.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04Merge branch 'master' of ↵David S. Miller4-9/+17
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next Pablo Neira Ayuso says: ==================== The following batch contains: * Three fixes for the new synproxy target available in your net-next tree, from Jesper D. Brouer and Patrick McHardy. * One fix for TCPMSS to correctly handling the fragmentation case, from Phil Oester. I'll pass this one to -stable. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04netfilter: xt_TCPMSS: correct return value in tcpmss_mangle_packetPhil Oester1-1/+1
In commit b396966c4 (netfilter: xt_TCPMSS: Fix missing fragmentation handling), I attempted to add safe fragment handling to xt_TCPMSS. However, Andy Padavan of Project N56U correctly points out that returning XT_CONTINUE in this function does not work. The callers (tcpmss_tg[46]) expect to receive a value of 0 in order to return XT_CONTINUE. Signed-off-by: Phil Oester <kernel@linuxace.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-09-04netfilter: SYNPROXY: let unrelated packets continueJesper Dangaard Brouer2-4/+12
Packets reaching SYNPROXY were default dropped, as they were most likely invalid (given the recommended state matching). This patch, changes SYNPROXY target to let packets, not consumed, continue being processed by the stack. This will be more in line other target modules. As it will allow more flexible configurations of handling, logging or matching on packets in INVALID states. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-09-04netfilter: synproxy_core: fix warning in __nf_ct_ext_add_length()Patrick McHardy1-2/+2
With CONFIG_NETFILTER_DEBUG we get the following warning during SYNPROXY init: [ 80.558906] WARNING: CPU: 1 PID: 4833 at net/netfilter/nf_conntrack_extend.c:80 __nf_ct_ext_add_length+0x217/0x220 [nf_conntrack]() The reason is that the conntrack template is set to confirmed before adding the extension and it is invalid to add extensions to already confirmed conntracks. Fix by adding the extensions before setting the conntrack to confirmed. Reported-by: Jesper Dangaard Brouer <jesper.brouer@gmail.com> Signed-off-by: Patrick McHardy <kaber@trash.net> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-09-04netfilter: more strict TCP flag matching in SYNPROXYJesper Dangaard Brouer2-4/+4
Its seems Patrick missed to incoorporate some of my requested changes during review v2 of SYNPROXY netfilter module. Which were, to avoid SYN+ACK packets to enter the path, meant for the ACK packet from the client (from the 3WHS). Further there were a bug in ip6t_SYNPROXY.c, for matching SYN packets that didn't exclude the ACK flag. Go a step further with SYN packet/flag matching by excluding flags ACK+FIN+RST, in both IPv4 and IPv6 modules. The intented usage of SYNPROXY is as follows: (gracefully describing usage in commit) iptables -t raw -A PREROUTING -i eth0 -p tcp --dport 80 --syn -j NOTRACK iptables -A INPUT -i eth0 -p tcp --dport 80 -m state UNTRACKED,INVALID \ -j SYNPROXY --sack-perm --timestamp --mss 1480 --wscale 7 --ecn echo 0 > /proc/sys/net/netfilter/nf_conntrack_tcp_loose This does filter SYN flags early, for packets in the UNTRACKED state, but packets in the INVALID state with other TCP flags could still reach the module, thus this stricter flag matching is still needed. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-09-04Merge branch 'master' into for-3.12/upstreamJiri Kosina372-8678/+12121
Sync with Linus' tree to be able to apply fixup patch on top of 9d9a04ee75 ("HID: apple: Add support for the 2013 Macbook Air") Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-09-04tcp: Change return value of tcp_rcv_established()Vijay Subramanian4-16/+10
tcp_rcv_established() returns only one value namely 0. We change the return value to void (as suggested by David Miller). After commit 0c24604b (tcp: implement RFC 5961 4.2), we no longer send RSTs in response to SYNs. We can remove the check and processing on the return value of tcp_rcv_established(). We also fix jtcp_rcv_established() in tcp_probe.c to match that of tcp_rcv_established(). Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04net: tcp_probe: adapt tbuf size for recent changesDaniel Borkmann1-1/+1
With recent changes in tcp_probe module (e.g. f925d0a62d ("net: tcp_probe: add IPv6 support")) we also need to take into account that tbuf needs to be updated as format string will be further expanded. tbuf sits on the stack in tcpprobe_read() function that is invoked when user space reads procfs file /proc/net/tcpprobe, hence not fast path as in jtcp_rcv_established(). Having a size similarly as in sctp_probe module of 256 bytes is fully sufficient for that, we need theoretical maximum of 252 bytes otherwise we could get truncated. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04x25: add a sanity check parsing X.25 facilitiesDan Carpenter1-0/+4
This was found with a manual audit and I don't have a reproducer. We limit ->calling_len and ->called_len when we get them from copy_from_user() in x25_ioctl() so when they come from skb->data then we should cap them there as well. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04net: correctly interlink lower/upper devicesVeaceslav Falico1-2/+2
Currently we're linking upper devices to lower ones, which results in upside-down relationship: upper devices seeing lower devices via its upper lists. Fix this by correctly linking lower devices to the upper ones. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Cong Wang <amwang@redhat.com> Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04tunnels: harmonize cleanup done on skb on rx pathNicolas Dichtel6-21/+6
The goal of this patch is to harmonize cleanup done on a skbuff on rx path. Before this patch, behaviors were different depending of the tunnel type. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04tunnels: harmonize cleanup done on skb on xmit pathNicolas Dichtel6-18/+10
The goal of this patch is to harmonize cleanup done on a skbuff on xmit path. Before this patch, behaviors were different depending of the tunnel type. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04skb: allow skb_scrub_packet() to be used by tunnelsNicolas Dichtel5-14/+19
This function was only used when a packet was sent to another netns. Now, it can also be used after tunnel encapsulation or decapsulation. Only skb_orphan() should not be done when a packet is not crossing netns. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04vxlan: remove net arg from vxlan[6]_xmit_skb()Nicolas Dichtel1-1/+1
This argument is not used, let's remove it. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04iptunnels: remove net arg from iptunnel_xmit()Nicolas Dichtel4-7/+5
This argument is not used, let's remove it. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03wireless: scan: Remove comment to compare_ether_addrJoe Perches1-4/+0
This function is being removed, so remove the reference to it. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03batman: Remove reference to compare_ether_addrJoe Perches1-1/+1
This function is being removed, rename the reference. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03llc: Use normal etherdevice.h testsJoe Perches3-8/+8
Convert the llc_<foo> static inlines to the equivalents from etherdevice.h and remove the llc_<foo> static inline functions. llc_mac_null -> is_zero_ether_addr llc_mac_multicast -> is_multicast_ether_addr llc_mac_match -> ether_addr_equal Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03ipv6: ipv6_create_tempaddr cleanupPetr Holasek1-2/+0
This two-liner removes max_addresses variable which is now unecessary related to patch [ipv6: remove max_addresses check from ipv6_create_tempaddr]. Signed-off-by: Petr Holasek <pholasek@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03ICMPv6: treat dest unreachable codes 5 and 6 as EACCES, not EPROTOJiri Bohac1-1/+9
RFC 4443 has defined two additional codes for ICMPv6 type 1 (destination unreachable) messages: 5 - Source address failed ingress/egress policy 6 - Reject route to destination Now they are treated as protocol error and icmpv6_err_convert() converts them to EPROTO. RFC 4443 says: "Codes 5 and 6 are more informative subsets of code 1." Treat codes 5 and 6 as code 1 (EACCES) Btw, connect() returning -EPROTO confuses firefox, so that fallback to other/IPv4 addresses does not work: https://bugzilla.mozilla.org/show_bug.cgi?id=910773 Signed-off-by: Jiri Bohac <jbohac@suse.cz> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03Merge branch 'for-davem' of git://gitorious.org/linux-can/linux-can-nextDavid S. Miller1-4/+31
Marc Kleine-Budde says: ==================== this is a pull request for net-next. There are two patches from Gerhard Sittig, which improves the clock handling on mpc5121. Oliver Hartkopp provides a patch that adds a per rule limitation of frame hops. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03Merge branch 'for-davem' of ↵David S. Miller30-583/+1046
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next John W. Linville says: ==================== Please accept this batch of updates intended for the 3.12 stream. For the mac80211 bits, Johannes says this: "This time I have various improvements all over the place: IBSS, mesh, testmode, AP client powersave handling, one of the rare rfkill patches and some code cleanup." Also for mac80211: "And I also have some more changes for -next, just a few small fixes and improvements, nothing really stands out." And for iwlwifi: "This time I have some powersave work (notably uAPSD support), CQM offloads, support for a new firmware API and various code cleanups." Regarding the Bluetooth bits, Gustavo says: "Patches to 3.12, here we have: * implementation of a proper tty_port for RFCOMM devices, this fixes some issues people were seeing lately in the kernel. * Add voice_setting option for SCO, it is used for SCO Codec selection * bugfixes, small improvements and clean ups" For the NFC bits, Samuel says: "With this one we have: - A few pn533 improvements and minor fixes. Testing our pn533 driver against Google's NCI stack triggered a few issues that we fixed now. We also added Tx fragmentation support to this driver. - More NFC secure element handling. We added a GET_SE netlink command for getting all the discovered secure elements, and we defined 2 additional secure element netlink event (transaction and connectivity). We also fixed a couple of typos and copy-paste bugs from the secure element handling code. - Firmware download support for the pn544 driver. This chipset can enter a special mode where it's waiting for firmware blobs to replace the already flashed one. We now support that mode." With repect to the ath tree, Kalle says: "New features in ath10k are rx/tx checsumming in hw and survey scan implemented by Michal. Also he made fixes to different areas of the driver, most notable being fixing the case when using two streams and reducing the number of interface combinations to avoid firmware crashes. Bartosz did a clean related to how we handle SoC power save in PCI layer. For ath6kl Mohammed and Vasanth sent each a patch to fix two infrequent crashes." I also pulled the wireless tree into wireless-next to support a request from Johannes. On top of all that, there are the usual sort of driver updates. The mwifiex, brcmfmac, brcmsmac, ath9k, and rt2x00 drivers all get some attention, as does the bcma bus and a few other random bits here and there. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-16 23:14:28 +0000