| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Minor overlapping changes in xfrm_device.c, between the double
ESP trailing bug fix setting the XFRM_INIT flag and the changes
in net-next preparing for bonding encryption support.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Rather than requiring every hw crypto capable NIC driver to do a check for
slave_dev being set, set real_dev in the xfrm layer and xso init time, and
then override it in the bonding driver as needed. Then NIC drivers can
always use real_dev, and at the same time, we eliminate the use of a
variable name that probably shouldn't have been used in the first place,
particularly given recent current events.
CC: Boris Pismenny <borisp@mellanox.com>
CC: Saeed Mahameed <saeedm@mellanox.com>
CC: Leon Romanovsky <leon@kernel.org>
CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: "David S. Miller" <davem@davemloft.net>
CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
CC: Jakub Kicinski <kuba@kernel.org>
CC: Steffen Klassert <steffen.klassert@secunet.com>
CC: Herbert Xu <herbert@gondor.apana.org.au>
CC: netdev@vger.kernel.org
Suggested-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is prep work for initial support of bonding hardware encryption
pass-through support. The bonding driver will fill in the slave_dev
pointer, and we use that to know not to skb_push() again on a given
skb that was already processed on the bond device.
CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: "David S. Miller" <davem@davemloft.net>
CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
CC: Jakub Kicinski <kuba@kernel.org>
CC: Steffen Klassert <steffen.klassert@secunet.com>
CC: Herbert Xu <herbert@gondor.apana.org.au>
CC: netdev@vger.kernel.org
CC: intel-wired-lan@lists.osuosl.org
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
During IPsec performance testing, we see bad ICMP checksum. The error packet
has duplicated ESP trailer due to double validate_xmit_xfrm calls. The first call
is from ip_output, but the packet cannot be sent because
netif_xmit_frozen_or_stopped is true and the packet gets dev_requeue_skb. The second
call is from NET_TX softirq. However after the first call, the packet already
has the ESP trailer.
Fix by marking the skb with XFRM_XMIT bit after the packet is handled by
validate_xmit_xfrm to avoid duplicate ESP trailer insertion.
Fixes: f6e27114a60a ("net: Add a xfrm validate function to validate_xmit_skb")
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Boris Pismenny <borisp@mellanox.com>
Reviewed-by: Raed Salem <raeds@mellanox.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
For transport mode, when ipv6 nexthdr is set, the packet format might
be like:
----------------------------------------------------
| | dest | | | | ESP | ESP |
| IP6 hdr| opts.| ESP | TCP | Data | Trailer | ICV |
----------------------------------------------------
and in __xfrm_transport_prep():
pskb_pull(skb, skb->mac_len + sizeof(ip6hdr) + x->props.header_len);
it will pull the data pointer to the wrong position, as it missed the
nexthdrs/dest opts.
This patch is to fix it by using:
pskb_pull(skb, skb_transport_offset(skb) + x->props.header_len);
as we can be sure transport_header points to ESP header at that moment.
It also fixes a panic when packets with ipv6 nexthdr are sent over
esp6 transport mode:
[ 100.473845] kernel BUG at net/core/skbuff.c:4325!
[ 100.478517] RIP: 0010:__skb_to_sgvec+0x252/0x260
[ 100.494355] Call Trace:
[ 100.494829] skb_to_sgvec+0x11/0x40
[ 100.495492] esp6_output_tail+0x12e/0x550 [esp6]
[ 100.496358] esp6_xmit+0x1d5/0x260 [esp6_offload]
[ 100.498029] validate_xmit_xfrm+0x22f/0x2e0
[ 100.499604] __dev_queue_xmit+0x589/0x910
[ 100.502928] ip6_finish_output2+0x2a5/0x5a0
[ 100.503718] ip6_output+0x6c/0x120
[ 100.505198] xfrm_output_resume+0x4bf/0x530
[ 100.508683] xfrm6_output+0x3a/0xc0
[ 100.513446] inet6_csk_xmit+0xa1/0xf0
[ 100.517335] tcp_sendmsg+0x27/0x40
[ 100.517977] sock_sendmsg+0x3e/0x60
[ 100.518648] __sys_sendto+0xee/0x160
Fixes: c35fe4106b92 ("xfrm: Add mode handlers for IPsec on layer 2")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2020-03-28
1) Use kmem_cache_zalloc() instead of kmem_cache_alloc()
in xfrm_state_alloc(). From Huang Zijiang.
2) esp_output_fill_trailer() is the same in IPv4 and IPv6,
so share this function to avoide code duplcation.
From Raed Salem.
3) Add offload support for esp beet mode.
From Xin Long.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Like __xfrm_transport/mode_tunnel_prep(), this patch is to add
__xfrm_mode_beet_prep() to fix the transport_header for gso
segments, and reset skb mac_len, and pull skb data to the
proto inside esp.
This patch also fixes a panic, reported by ltp:
# modprobe esp4_offload
# runltp -f net_stress.ipsec_tcp
[ 2452.780511] kernel BUG at net/core/skbuff.c:109!
[ 2452.799851] Call Trace:
[ 2452.800298] <IRQ>
[ 2452.800705] skb_push.cold.98+0x14/0x20
[ 2452.801396] esp_xmit+0x17b/0x270 [esp4_offload]
[ 2452.802799] validate_xmit_xfrm+0x22f/0x2e0
[ 2452.804285] __dev_queue_xmit+0x589/0x910
[ 2452.806264] __neigh_update+0x3d7/0xa50
[ 2452.806958] arp_process+0x259/0x810
[ 2452.807589] arp_rcv+0x18a/0x1c
It was caused by the skb going to esp_xmit with a wrong transport
header.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Xiumei found a panic in esp offload:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
RIP: 0010:esp_output_done+0x101/0x160 [esp4]
Call Trace:
? esp_output+0x180/0x180 [esp4]
cryptd_aead_crypt+0x4c/0x90
cryptd_queue_worker+0x6e/0xa0
process_one_work+0x1a7/0x3b0
worker_thread+0x30/0x390
? create_worker+0x1a0/0x1a0
kthread+0x112/0x130
? kthread_flush_work_fn+0x10/0x10
ret_from_fork+0x35/0x40
It was caused by that skb secpath is used in esp_output_done() after it's
been released elsewhere.
The tx path for esp offload is:
__dev_queue_xmit()->
validate_xmit_skb_list()->
validate_xmit_xfrm()->
esp_xmit()->
esp_output_tail()->
aead_request_set_callback(esp_output_done) <--[1]
crypto_aead_encrypt() <--[2]
In [1], .callback is set, and in [2] it will trigger the worker schedule,
later on a kernel thread will call .callback(esp_output_done), as the call
trace shows.
But in validate_xmit_xfrm():
skb_list_walk_safe(skb, skb2, nskb) {
...
err = x->type_offload->xmit(x, skb2, esp_features); [esp_xmit]
...
}
When the err is -EINPROGRESS, which means this skb2 will be enqueued and
later gets encrypted and sent out by .callback later in a kernel thread,
skb2 should be removed fromt skb chain. Otherwise, it will get processed
again outside validate_xmit_xfrm(), which could release skb secpath, and
cause the panic above.
This patch is to remove the skb from the chain when it's enqueued in
cryptd_wq. While at it, remove the unnecessary 'if (!skb)' check.
Fixes: 3dca3f38cfb8 ("xfrm: Separate ESP handling from segmentation for GRO packets.")
Reported-by: Xiumei Mu <xmu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
This patch to handle the asynchronous unregister
device event so the device IPsec offload resources
could be cleanly released.
Fixes: e4db5b61c572 ("xfrm: policy: remove pcpu policy cache")
Signed-off-by: Raed Salem <raeds@mellanox.com>
Reviewed-by: Boris Pismenny <borisp@mellanox.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
This is converts xfrm segment iteration to use the new function, keeping
the flow of the existing code as intact as possible. One case is very
straight-forward, whereas the other case has some more subtle code that
likes to peak at ->next and relink skbs. By keeping the variables the
same as before, we can upgrade this code with minimal surgery required.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2019-07-05
1) A lot of work to remove indirections from the xfrm code.
From Florian Westphal.
2) Fix a WARN_ON with ipv6 that triggered because of a
forgotten break statement. From Florian Westphal.
3) Remove xfrmi_init_net, it is not needed.
From Li RongQing.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
esp4_get_mtu and esp6_get_mtu are exactly the same, the only difference
is a single sizeof() (ipv4 vs. ipv6 header).
Merge both into xfrm_state_mtu() and remove the indirection.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 3029 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This structure is now only 4 bytes, so its more efficient
to cache a copy rather than its address.
No significant size difference in allmodconfig vmlinux.
With non-modular kernel that has all XFRM options enabled, this
series reduces vmlinux image size by ~11kb. All xfrm_mode
indirections are gone and all modes are built-in.
before (ipsec-next master):
text data bss dec filename
21071494 7233140 11104324 39408958 vmlinux.master
after this series:
21066448 7226772 11104324 39397544 vmlinux.patched
With allmodconfig kernel, the size increase is only 362 bytes,
even all the xfrm config options removed in this series are
modular.
before:
text data bss dec filename
15731286 6936912 4046908 26715106 vmlinux.master
after this series:
15731492 6937068 4046908 26715468 vmlinux
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
There are only two versions (tunnel and transport). The ip/ipv6 versions
are only differ in sizeof(iphdr) vs ipv6hdr.
Place this in the core and use x->outer_mode->encap type to call the
correct adjustment helper.
Before:
text data bss dec filename
15730311 6937008 4046908 26714227 vmlinux
After:
15730428 6937008 4046908 26714344 vmlinux
(about 117 byte increase)
v2: use family from x->outer_mode, not inner
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
This patch introduces support for gso partial ESP offload.
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Raed Salem <raeds@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
With the following patches, we are going to use __netdev_pick_tx() in
many modules. Rename it to netdev_pick_tx(), to make it clear is
a public API.
Also rename the existing netdev_pick_tx() to netdev_core_pick_tx(),
to avoid name clashes.
Suggested-by: Eric Dumazet <edumazet@google.com>
Suggested-by: David Miller <davem@davemloft.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
skb_sec_path gains 'const' qualifier to avoid
xt_policy.c: 'skb_sec_path' discards 'const' qualifier from pointer target type
same reasoning as previous conversions: Won't need to touch these
spots anymore when skb->sp is removed.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2018-10-01
1) Make xfrmi_get_link_net() static to silence a sparse warning.
From Wei Yongjun.
2) Remove a unused esph pointer definition in esp_input().
From Haishuang Yan.
3) Allow the NIC driver to quietly refuse xfrm offload
in case it does not support it, the SA is created
without offload in this case.
From Shannon Nelson.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
An SKB is not on a list if skb->next is NULL.
Codify this convention into a helper function and use it
where we are dequeueing an SKB and need to mark it as such.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If the "offload" attribute is used to create an IPsec SA
and the .xdo_dev_state_add() fails, the SA creation fails.
However, if the "offload" attribute is used on a device that
doesn't offer it, the attribute is quietly ignored and the SA
is created without an offload.
Along the same line of that second case, it would be good to
have a way for the device to refuse to offload an SA without
failing the whole SA creation. This patch adds that feature
by allowing the driver to return -EOPNOTSUPP as a signal that
the SA may be fine, it just can't be offloaded.
This allows the user a little more flexibility in requesting
offloads and not needing to know every detail at all times about
each specific NIC when trying to create SAs.
Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
The offload_handle should be an opaque data cookie for the driver
to use, much like the data cookie for a timer or alarm callback.
Thus, the XFRM stack should not be checking for non-zero, because
the driver might use that to store an array reference, which could
be zero, or some other zero but meaningful value.
We can remove the checks for non-zero because there are plenty
other attributes also being checked to see if there is an offload
in place for the SA in question.
Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Kristian Evensen says:
In a project I am involved in, we are running ipsec (Strongswan) on
different mt7621-based routers. Each router is configured as an
initiator and has around ~30 tunnels to different responders (running
on misc. devices). Before the flow cache was removed (kernel 4.9), we
got a combined throughput of around 70Mbit/s for all tunnels on one
router. However, we recently switched to kernel 4.14 (4.14.48), and
the total throughput is somewhere around 57Mbit/s (best-case). I.e., a
drop of around 20%. Reverting the flow cache removal restores, as
expected, performance levels to that of kernel 4.9.
When pcpu xdst exists, it has to be validated first before it can be
used.
A negative hit thus increases cost vs. no-cache.
As number of tunnels increases, hit rate decreases so this pcpu caching
isn't a viable strategy.
Furthermore, the xdst cache also needs to run with BH off, so when
removing this the bh disable/enable pairs can be removed too.
Kristian tested a 4.14.y backport of this change and reported
increased performance:
In our tests, the throughput reduction has been reduced from around -20%
to -5%. We also see that the overall throughput is independent of the
number of tunnels, while before the throughput was reduced as the number
of tunnels increased.
Reported-by: Kristian Evensen <kristian.evensen@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
We already support setting an output mark at the xfrm_state,
unfortunately this does not support the input direction and
masking the marks that will be applied to the skb. This change
adds support applying a masked value in both directions.
The existing XFRMA_OUTPUT_MARK number is reused for this purpose
and as it is now bi-directional, it is renamed to XFRMA_SET_MARK.
An additional XFRMA_SET_MARK_MASK attribute is added for setting the
mask. If the attribute mask not provided, it is set to 0xffffffff,
keeping the XFRMA_OUTPUT_MARK existing 'full mask' semantics.
Co-developed-by: Tobias Brunner <tobias@strongswan.org>
Co-developed-by: Eyal Birger <eyal.birger@gmail.com>
Co-developed-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Tobias Brunner <tobias@strongswan.org>
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
|
|
Currently, driver registers it from pernet_operations::init method,
and this breaks modularity, because initialization of net namespace
and netdevice notifiers are orthogonal actions. We don't have
per-namespace netdevice notifiers; all of them are global for all
devices in all namespaces.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If you take a GSO skb, and split it into packets, will the network
length (L3 headers + L4 headers + payload) of those packets be small
enough to fit within a given MTU?
skb_gso_validate_mtu gives you the answer to that question. However,
we recently added to add a way to validate the MAC length of a split GSO
skb (L2+L3+L4+payload), and the names get confusing, so rename
skb_gso_validate_mtu to skb_gso_validate_network_len
Signed-off-by: Daniel Axtens <dja@axtens.net>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2018-01-26
One last patch for this development cycle:
1) Add ESN support for IPSec HW offload.
From Yossef Efraim.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If add state fails in case of device offload, netdev refcount
will be negative since gc task is attempting to dev_free this state.
This is fixed by putting NULL in state dev field.
Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com>
Signed-off-by: Boris Pismeny <borisp@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
This patch adds ESN support to IPsec device offload.
Adding new xfrm device operation to synchronize device ESN.
Signed-off-by: Yossef Efraim <yossefe@mellanox.com>
Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
This adds a check for the required add and delete functions up front
at registration time to be sure both are defined.
Since both the features check and the registration check are looking
at the same things, break out the check for both to call.
Lastly, for some reason the feature check was setting xfrmdev_ops to
NULL if the NETIF_F_HW_ESP bit was missing, which would probably
surprise the driver later if the driver turned its NETIF_F_HW_ESP bit
back on. We shouldn't be messing with the driver's callback list, so
we stop doing that with this patch.
Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
We now have support for asynchronous crypto operations in the layer 2 TX
path. This was the missing part to allow the GSO codepath for software
crypto, so allow this codepath now.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
This patch implements asynchronous crypto callbacks
and a backlog handler that can be used when IPsec
is done at layer 2 in the TX path. It also extends
the skb validate functions so that we can update
the driver transmit return codes based on async
crypto operation or to indicate that we queued the
packet in a backlog queue.
Joint work with: Aviv Heller <avivh@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
We change the ESP GSO handlers to only segment the packets.
The ESP handling and encryption is defered to validate_xmit_xfrm()
where this is done for non GRO packets too. This makes the code
more robust and prepares for asynchronous crypto handling.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2017-12-15
1) Currently we can add or update socket policies, but
not clear them. Support clearing of socket policies
too. From Lorenzo Colitti.
2) Add documentation for the xfrm device offload api.
From Shannon Nelson.
3) Fix IPsec extended sequence numbers (ESN) for
IPsec offloading. From Yossef Efraim.
4) xfrm_dev_state_add function returns success even for
unsupported options, fix this to fail in such cases.
From Yossef Efraim.
5) Remove a redundant xfrm_state assignment.
From Aviv Heller.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
xfrm_dev_state_add function returns success for unsupported HW SA options.
Resulting the calling function to create SW SA without corrlating HW SA.
Desipte IPSec device offloading option was chosen.
These not supported HW SA options are hard coded within xfrm_dev_state_add
function.
SW backward compatibility will break if we add any of these option as old
HW will fail with new SW.
This patch changes the behaviour to return -EINVAL in case unsupported
option is chosen.
Notifying user application regarding failure and not breaking backward
compatibility for newly added HW SA options.
Signed-off-by: Yossef Efraim <yossefe@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
The first member of an IPSEC route bundle chain sets it's dst->path to
the underlying ipv4/ipv6 route that carries the bundle.
Stated another way, if one were to follow the xfrm_dst->child chain of
the bundle, the final non-NULL pointer would be the path and point to
either an ipv4 or an ipv6 route.
This is largely used to make sure that PMTU events propagate down to
the correct ipv4 or ipv6 route.
When we don't have the top of an IPSEC bundle 'dst->path == dst'.
Move it down into xfrm_dst and key off of dst->xfrm.
Signed-off-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
|
|
XFRM bundle child chains look like this:
xdst1 --> xdst2 --> xdst3 --> path_dst
All of xdstN are xfrm_dst objects and xdst->u.dst.xfrm is non-NULL.
The final child pointer in the chain, here called 'path_dst', is some
other kind of route such as an ipv4 or ipv6 one.
The xfrm output path pops routes, one at a time, via the child
pointer, until we hit one which has a dst->xfrm pointer which
is NULL.
We can easily preserve the above mechanisms with child sitting
only in the xfrm_dst structure. All children in the chain
before we break out of the xfrm_output() loop have dst->xfrm
non-NULL and are therefore xfrm_dst objects.
Since we break out of the loop when we find dst->xfrm NULL, we
will not try to dereference 'dst' as if it were an xfrm_dst.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Reset the offload device at the xfrm_state if the device was
not able to offload the state. Otherwise we drop the device
refcount twice.
Fixes: d77e38e612a0 ("xfrm: Add an IPsec hardware offloading API")
Reported-by: Shannon Nelson <shannon.nelson@oracle.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
On systems that use mark-based routing it may be necessary for
routing lookups to use marks in order for packets to be routed
correctly. An example of such a system is Android, which uses
socket marks to route packets via different networks.
Currently, routing lookups in tunnel mode always use a mark of
zero, making routing incorrect on such systems.
This patch adds a new output_mark element to the xfrm state and
a corresponding XFRMA_OUTPUT_MARK netlink attribute. The output
mark differs from the existing xfrm mark in two ways:
1. The xfrm mark is used to match xfrm policies and states, while
the xfrm output mark is used to set the mark (and influence
the routing) of the packets emitted by those states.
2. The existing mark is constrained to be a subset of the bits of
the originating socket or transformed packet, but the output
mark is arbitrary and depends only on the state.
The use of a separate mark provides additional flexibility. For
example:
- A packet subject to two transforms (e.g., transport mode inside
tunnel mode) can have two different output marks applied to it,
one for the transport mode SA and one for the tunnel mode SA.
- On a system where socket marks determine routing, the packets
emitted by an IPsec tunnel can be routed based on a mark that
is determined by the tunnel, not by the marks of the
unencrypted packets.
- Support for setting the output marks can be introduced without
breaking any existing setups that employ both mark-based
routing and xfrm tunnel mode. Simply changing the code to use
the xfrm mark for routing output packets could xfrm mark could
change behaviour in a way that breaks these setups.
If the output mark is unspecified or set to zero, the mark is not
set or changed.
Tested: make allyesconfig; make -j64
Tested: https://android-review.googlesource.com/452776
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
IPSec crypto offload depends on the protocol-specific
offload module (such as esp_offload.ko).
When the user installs an SA with crypto-offload, load
the offload module automatically, in the same way
that the protocol module is loaded (such as esp.ko)
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
retain last used xfrm_dst in a pcpu cache.
On next request, reuse this dst if the policies are the same.
The cache will not help with strict RR workloads as there is no hit.
The cache packet-path part is reasonably small, the notifier part is
needed so we do not add long hangs when a device is dismantled but some
pcpu xdst still holds a reference, there are also calls to the flush
operation when userspace deletes SAs so modules can be removed
(there is no hit.
We need to run the dst_release on the correct cpu to avoid races with
packet path. This is done by adding a work_struct for each cpu and then
doing the actual test/release on each affected cpu via schedule_work_on().
Test results using 4 network namespaces and null encryption:
ns1 ns2 -> ns3 -> ns4
netperf -> xfrm/null enc -> xfrm/null dec -> netserver
what TCP_STREAM UDP_STREAM UDP_RR
Flow cache: 14644.61 294.35 327231.64
No flow cache: 14349.81 242.64 202301.72
Pcpu cache: 14629.70 292.21 205595.22
UDP tests used 64byte packets, tests ran for one minute each,
value is average over ten iterations.
'Flow cache' is 'net-next', 'No flow cache' is net-next plus this
series but without this patch.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After rcu conversions performance degradation in forward tests isn't that
noticeable anymore.
See next patch for some numbers.
A followup patcg could then also remove genid from the policies
as we do not cache bundles anymore.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A set of overlapping changes in macvlan and the rocker
driver, nothing serious.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2017-06-23
1) Use memdup_user to spmlify xfrm_user_policy.
From Geliang Tang.
2) Make xfrm_dev_register static to silence a sparse warning.
From Wei Yongjun.
3) Use crypto_memneq to check the ICV in the AH protocol.
From Sabrina Dubroca.
4) Remove some unused variables in esp6.
From Stephen Hemminger.
5) Extend XFRM MIGRATE to allow to change the UDP encapsulation port.
From Antony Antony.
6) Include the UDP encapsulation port to km_migrate announcements.
From Antony Antony.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In commit d77e38e612a0 ("xfrm: Add an IPsec hardware offloading API") we
make xfrm_device.o only compiled when enable option CONFIG_XFRM_OFFLOAD.
But this will make xfrm_dev_event() missing if we only enable default XFRM
options.
Then if we set down and unregister an interface with IPsec on it. there
will no xfrm_garbage_collect(), which will cause dev usage count hold and
get error like:
unregister_netdevice: waiting for <dev> to become free. Usage count = 4
Fixes: d77e38e612a0 ("xfrm: Add an IPsec hardware offloading API")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Fixes the following sparse warning:
net/xfrm/xfrm_device.c:141:5: warning:
symbol 'xfrm_dev_register' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Upon NETDEV_DOWN event, all xfrm_state objects which are bound to
the device are flushed.
The condition for this is wrong, though, testing dev->hw_features
instead of dev->features. If a device has non-user-modifiable
NETIF_F_HW_ESP, then its xfrm_state objects are not flushed,
causing a crash later on after the device is deleted.
Check dev->features instead of dev->hw_features.
Fixes: d77e38e612a0 ("xfrm: Add an IPsec hardware offloading API")
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
When we do IPsec offloading, we need a fallback for
packets that were targeted to be IPsec offloaded but
rerouted to a device that does not support IPsec offload.
For that we add a function that checks the offloading
features of the sending device and and flags the
requirement of a fallback before it calls the IPsec
output function. The IPsec output function adds the IPsec
trailer and does encryption if needed.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
This patch adds all the bits that are needed to do
IPsec hardware offload for IPsec states and ESP packets.
We add xfrmdev_ops to the net_device. xfrmdev_ops has
function pointers that are needed to manage the xfrm
states in the hardware and to do a per packet
offloading decision.
Joint work with:
Ilan Tayari <ilant@mellanox.com>
Guy Shapiro <guysh@mellanox.com>
Yossi Kuperman <yossiku@mellanox.com>
Signed-off-by: Guy Shapiro <guysh@mellanox.com>
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Yossi Kuperman <yossiku@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
