summaryrefslogtreecommitdiff
path: root/net/sunrpc
AgeCommit message (Collapse)AuthorFilesLines
2009-05-12Merge branch 'for-2.6.30' of git://linux-nfs.org/~bfields/linuxLinus Torvalds3-2/+6
* 'for-2.6.30' of git://linux-nfs.org/~bfields/linux: nfsd: silence lockdep warning lockd: fix list corruption on lockd restart nfsd4: check for negative dentry before use in nfsv4 readdir nfsd41: slots are freed with session svcrdma: clean up error paths. svcrdma: Fix dma map direction for rdma read targets
2009-05-03svcrdma: clean up error paths.Steve Wise2-1/+5
These fixes resolved crashes due to resource leak BUG_ON checks. The resource leaks were detected by introducing asynchronous transport errors. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Tom Tucker <tom@opengridcomputing.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-05-02SUNRPC: Fix the problem of EADDRNOTAVAIL syslog floods on reconnectTrond Myklebust2-9/+23
See http://bugzilla.kernel.org/show_bug.cgi?id=13034 If the port gets into a TIME_WAIT state, then we cannot reconnect without binding to a new port. Tested-by: Petr Vandrovec <petr@vandrovec.name> Tested-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-25svcrdma: Fix dma map direction for rdma read targetsSteve Wise1-1/+1
The nfs server rdma transport was mapping rdma read target pages for TO_DEVICE instead of FROM_DEVICE. This causes data corruption on non cache-coherent systems if frmrs are used. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-04-06Merge branch 'for-2.6.30' of git://linux-nfs.org/~bfields/linuxLinus Torvalds3-38/+127
* 'for-2.6.30' of git://linux-nfs.org/~bfields/linux: (81 commits) nfsd41: define nfsd4_set_statp as noop for !CONFIG_NFSD_V4 nfsd41: define NFSD_DRC_SIZE_SHIFT in set_max_drc nfsd41: Documentation/filesystems/nfs41-server.txt nfsd41: CREATE_EXCLUSIVE4_1 nfsd41: SUPPATTR_EXCLCREAT attribute nfsd41: support for 3-word long attribute bitmask nfsd: dynamically skip encoded fattr bitmap in _nfsd4_verify nfsd41: pass writable attrs mask to nfsd4_decode_fattr nfsd41: provide support for minor version 1 at rpc level nfsd41: control nfsv4.1 svc via /proc/fs/nfsd/versions nfsd41: add OPEN4_SHARE_ACCESS_WANT nfs4_stateid bmap nfsd41: access_valid nfsd41: clientid handling nfsd41: check encode size for sessions maxresponse cached nfsd41: stateid handling nfsd: pass nfsd4_compound_state* to nfs4_preprocess_{state,seq}id_op nfsd41: destroy_session operation nfsd41: non-page DRC for solo sequence responses nfsd41: Add a create session replay cache nfsd41: create_session operation ...
2009-04-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-cpumaskLinus Torvalds1-2/+1
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-cpumask: (36 commits) cpumask: remove cpumask allocation from idle_balance, fix numa, cpumask: move numa_node_id default implementation to topology.h, fix cpumask: remove cpumask allocation from idle_balance x86: cpumask: x86 mmio-mod.c use cpumask_var_t for downed_cpus x86: cpumask: update 32-bit APM not to mug current->cpus_allowed x86: microcode: cleanup x86: cpumask: use work_on_cpu in arch/x86/kernel/microcode_core.c cpumask: fix CONFIG_CPUMASK_OFFSTACK=y cpu hotunplug crash numa, cpumask: move numa_node_id default implementation to topology.h cpumask: convert node_to_cpumask_map[] to cpumask_var_t cpumask: remove x86 cpumask_t uses. cpumask: use cpumask_var_t in uv_flush_tlb_others. cpumask: remove cpumask_t assignment from vector_allocation_domain() cpumask: make Xen use the new operators. cpumask: clean up summit's send_IPI functions cpumask: use new cpumask functions throughout x86 x86: unify cpu_callin_mask/cpu_callout_mask/cpu_initialized_mask/cpu_sibling_setup_mask cpumask: convert struct cpuinfo_x86's llc_shared_map to cpumask_var_t cpumask: convert node_to_cpumask_map[] to cpumask_var_t x86: unify 32 and 64-bit node_to_cpumask_map ...
2009-04-03nfsd: don't use the deferral service, return NFS4ERR_DELAYAndy Adamson2-1/+3
On an NFSv4.1 server cache miss that causes an upcall, NFS4ERR_DELAY will be returned. It is up to the NFSv4.1 client to resend only the operations that have not been processed. Initialize rq_usedeferral to 1 in svc_process(). It sill be turned off in nfsd4_proc_compound() only when NFSv4.1 Sessions are used. Note: this isn't an adequate solution on its own. It's acceptable as a way to get some minimal 4.1 up and working, but we're going to have to find a way to avoid returning DELAY in all common cases before 4.1 can really be considered ready. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> [nfsd41: reverse rq_nodeferral negative logic] Signed-off-by: Benny Halevy <bhalevy@panasas.com> [sunrpc: initialize rq_usedeferral] Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-04-03Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (28 commits) trivial: Update my email address trivial: NULL noise: drivers/mtd/tests/mtd_*test.c trivial: NULL noise: drivers/media/dvb/frontends/drx397xD_fw.h trivial: Fix misspelling of "Celsius". trivial: remove unused variable 'path' in alloc_file() trivial: fix a pdlfush -> pdflush typo in comment trivial: jbd header comment typo fix for JBD_PARANOID_IOFAIL trivial: wusb: Storage class should be before const qualifier trivial: drivers/char/bsr.c: Storage class should be before const qualifier trivial: h8300: Storage class should be before const qualifier trivial: fix where cgroup documentation is not correctly referred to trivial: Give the right path in Documentation example trivial: MTD: remove EOL from MODULE_DESCRIPTION trivial: Fix typo in bio_split()'s documentation trivial: PWM: fix of #endif comment trivial: fix typos/grammar errors in Kconfig texts trivial: Fix misspelling of firmware trivial: cgroups: documentation typo and spelling corrections trivial: Update contact info for Jochen Hein trivial: fix typo "resgister" -> "register" ...
2009-04-01Merge branch 'devel' into for-linusTrond Myklebust10-383/+505
2009-04-01SUNRPC: Ensure IPV6_V6ONLY is set on the socket before binding to a portTrond Myklebust1-12/+24
Also ensure that we use the protocol family instead of the address family when calling sock_create_kern(). Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-31Merge branch 'cpumask-for-linus' of ↵Rusty Russell1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip Conflicts: arch/x86/include/asm/topology.h drivers/oprofile/buffer_sync.c (Both cases: changed in Linus' tree, removed in Ingo's).
2009-03-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-cpumaskLinus Torvalds1-1/+1
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-cpumask: oprofile: Thou shalt not call __exit functions from __init functions cpumask: remove the now-obsoleted pcibus_to_cpumask(): generic cpumask: remove cpumask_t from core cpumask: convert rcutorture.c cpumask: use new cpumask_ functions in core code. cpumask: remove references to struct irqaction's mask field. cpumask: use mm_cpumask() wrapper: kernel/fork.c cpumask: use set_cpu_active in init/main.c cpumask: remove node_to_first_cpu cpumask: fix seq_bitmap_*() functions. cpumask: remove dangerous CPU_MASK_ALL_PTR, &CPU_MASK_ALL
2009-03-30Merge branch 'linus' into cpumask-for-linusIngo Molnar4-52/+61
Conflicts: arch/x86/kernel/cpu/common.c
2009-03-31proc 2/2: remove struct proc_dir_entry::ownerAlexey Dobriyan2-12/+2
Setting ->owner as done currently (pde->owner = THIS_MODULE) is racy as correctly noted at bug #12454. Someone can lookup entry with NULL ->owner, thus not pinning enything, and release it later resulting in module refcount underflow. We can keep ->owner and supply it at registration time like ->proc_fops and ->data. But this leaves ->owner as easy-manipulative field (just one C assignment) and somebody will forget to unpin previous/pin current module when switching ->owner. ->proc_fops is declared as "const" which should give some thoughts. ->read_proc/->write_proc were just fixed to not require ->owner for protection. rmmod'ed directories will be empty and return "." and ".." -- no harm. And directories with tricky enough readdir and lookup shouldn't be modular. We definitely don't want such modular code. Removing ->owner will also make PDE smaller. So, let's nuke it. Kudos to Jeff Layton for reminding about this, let's say, oversight. http://bugzilla.kernel.org/show_bug.cgi?id=12454 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2009-03-30trivial: fix typos/grammar errors in Kconfig textsMatt LaPlante1-1/+1
Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-03-30cpumask: use new cpumask_ functions in core code.Rusty Russell1-1/+1
Impact: cleanup Time to clean up remaining laggards using the old cpu_ functions. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Trond.Myklebust@netapp.com
2009-03-28SUNRPC: Remove CONFIG_SUNRPC_REGISTER_V4Chuck Lever1-22/+0
We just augmented the kernel's RPC service registration code so that it automatically adjusts to what is supported in user space. Thus we no longer need the kernel configuration option to enable registering RPC services with v4 -- it's all done automatically. This patch is part of a series that addresses http://bugzilla.kernel.org/show_bug.cgi?id=12256 Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-28SUNRPC: rpcb_register() should handle errors silentlyChuck Lever2-8/+12
Move error reporting for RPC registration to rpcb_register's caller. This way the caller can choose to recover silently from certain errors, but report errors it does not recognize. Error reporting for kernel RPC service registration is now handled in one place. This patch is part of a series that addresses http://bugzilla.kernel.org/show_bug.cgi?id=12256 Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-28SUNRPC: Simplify kernel RPC service registrationChuck Lever1-45/+34
The kernel registers RPC services with the local portmapper with an rpcbind SET upcall to the local portmapper. Traditionally, this used rpcbind v2 (PMAP), but registering RPC services that support IPv6 requires rpcbind v3 or v4. Since we now want separate PF_INET and PF_INET6 listeners for each kernel RPC service, svc_register() will do only one of those registrations at a time. For PF_INET, it tries an rpcb v4 SET upcall first; if that fails, it does a legacy portmap SET. This makes it entirely backwards compatible with legacy user space, but allows a proper v4 SET to be used if rpcbind is available. For PF_INET6, it does an rpcb v4 SET upcall. If that fails, it fails the registration, and thus the transport creation. This let's the kernel detect if user space is able to support IPv6 RPC services, and thus whether it should maintain a PF_INET6 listener for each service at all. This provides complete backwards compatibilty with legacy user space that only supports rpcbind v2. The only down-side is that registering a new kernel RPC service may take an extra exchange with the local portmapper on legacy systems, but this is an infrequent operation and is done over UDP (no lingering sockets in TIMEWAIT), so it shouldn't be consequential. This patch is part of a series that addresses http://bugzilla.kernel.org/show_bug.cgi?id=12256 Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-28SUNRPC: Simplify svc_unregister()Chuck Lever1-21/+14
Our initial implementation of svc_unregister() assumed that PMAP_UNSET cleared all rpcbind registrations for a [program, version] tuple. However, we now have evidence that PMAP_UNSET clears only "inet" entries, and not "inet6" entries, in the rpcbind database. For backwards compatibility with the legacy portmapper, the svc_unregister() function also must work if user space doesn't support rpcbind version 4 at all. Thus we'll send an rpcbind v4 UNSET, and if that fails, we'll send a PMAP_UNSET. This simplifies the code in svc_unregister() and provides better backwards compatibility with legacy user space that does not support rpcbind version 4. We can get rid of the conditional compilation in here as well. This patch is part of a series that addresses http://bugzilla.kernel.org/show_bug.cgi?id=12256 Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-28SUNRPC: Allow callers to pass rpcb_v4_register a NULL addressChuck Lever1-10/+28
The user space TI-RPC library uses an empty string for the universal address when unregistering all target addresses for [program, version]. The kernel's rpcb client should behave the same way. Here, we are switching between several registration methods based on the protocol family of the incoming address. Rename the other rpcbind v4 registration functions to make it clear that they, as well, are switched on protocol family. In /etc/netconfig, this is either "inet" or "inet6". NB: The loopback protocol families are not supported in the kernel. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-28SUNRPC: rpcbind actually interprets r_owner stringChuck Lever1-3/+10
RFC 1833 has little to say about the contents of r_owner; it only specifies that it is a string, and states that it is used to control who can UNSET an entry. Our port of rpcbind (from Sun) assumes this string contains a numeric UID value, not alphabetical or symbolic characters, but checks this value only for AF_LOCAL RPCB_SET or RPCB_UNSET requests. In all other cases, rpcbind ignores the contents of the r_owner string. The reference user space implementation of rpcb_set(3) uses a numeric UID for all SET/UNSET requests (even via the network) and an empty string for all other requests. We emulate that behavior here to maintain bug-for-bug compatibility. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-28SUNRPC: Clean up address type casts in rpcb_v4_register()Chuck Lever1-14/+12
Clean up: Simplify rpcb_v4_register() and its helpers by moving the details of sockaddr type casting to rpcb_v4_register()'s helper functions. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-28SUNRPC: Don't return EPROTONOSUPPORT in svc_register()'s helpersChuck Lever1-2/+2
The RPC client returns -EPROTONOSUPPORT if there is a protocol version mismatch (ie the remote RPC server doesn't support the RPC protocol version sent by the client). Helpers for the svc_register() function return -EPROTONOSUPPORT if they don't recognize the passed-in IPPROTO_ value. These are two entirely different failure modes. Have the helpers return -ENOPROTOOPT instead of -EPROTONOSUPPORT. This will allow callers to determine more precisely what the underlying problem is, and decide to report or recover appropriately. This patch is part of a series that addresses http://bugzilla.kernel.org/show_bug.cgi?id=12256 Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-28SUNRPC: Use IPv4 loopback for registering AF_INET6 kernel RPC servicesChuck Lever1-17/+6
The kernel uses an IPv6 loopback address when registering its AF_INET6 RPC services so that it can tell whether the local portmapper is actually IPv6-enabled. Since the legacy portmapper doesn't listen on IPv6, however, this causes a long timeout on older systems if the kernel happens to try creating and registering an AF_INET6 RPC service. Originally I wanted to use a connected transport (either TCP or connected UDP) so that the upcall would fail immediately if the portmapper wasn't listening on IPv6, but we never agreed on what transport to use. In the end, it's of little consequence to the kernel whether the local portmapper is listening on IPv6. It's only important whether the portmapper supports rpcbind v4. And the kernel can't tell that at all if it is sending requests via IPv6 -- the portmapper will just ignore them. So, send both rpcbind v2 and v4 SET/UNSET requests via IPv4 loopback to maintain better backwards compatibility between new kernels and legacy user space, and prevent multi-second hangs in some cases when the kernel attempts to register RPC services. This patch is part of a series that addresses http://bugzilla.kernel.org/show_bug.cgi?id=12256 Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-28SUNRPC: Set IPV6ONLY flag on PF_INET6 RPC listener socketsChuck Lever1-6/+4
We are about to convert to using separate RPC listener sockets for PF_INET and PF_INET6. This echoes the way IPv6 is handled in user space by TI-RPC, and eliminates the need for ULPs to worry about mapped IPv4 AF_INET6 addresses when doing address comparisons. Start by setting the IPV6ONLY flag on PF_INET6 RPC listener sockets. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-28SUNRPC: Remove @family argument from svc_create() and svc_create_pooled()Chuck Lever1-6/+5
Since an RPC service listener's protocol family is specified now via svc_create_xprt(), it no longer needs to be passed to svc_create() or svc_create_pooled(). Remove that argument from the synopsis of those functions, and remove the sv_family field from the svc_serv struct. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-28SUNRPC: Change svc_create_xprt() to take a @family argumentChuck Lever1-6/+9
The sv_family field is going away. Pass a protocol family argument to svc_create_xprt() instead of extracting the family from the passed-in svc_serv struct. Again, as this is a listener socket and not an address, we make this new argument an "int" protocol family, instead of an "sa_family_t." Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-28SUNRPC: svc_setup_socket() gets protocol family from socketChuck Lever1-3/+3
Since the sv_family field is going away, modify svc_setup_socket() to extract the protocol family from the passed-in socket instead of from the passed-in svc_serv struct. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-28SUNRPC: Pass a family argument to svc_register()Chuck Lever2-11/+12
The sv_family field is going away. Instead of using sv_family, have the svc_register() function take a protocol family argument. Since this argument represents a protocol family, and not an address family, this argument takes an int, as this is what is passed to sock_create_kern(). Also make sure svc_register's helpers are checking for PF_FOO instead of AF_FOO. The value of [AP]F_FOO are equivalent; this is simply a symbolic change to reflect the semantics of the value stored in that variable. sock_create_kern() should return EPFNOSUPPORT if the passed-in protocol family isn't supported, but it uses EAFNOSUPPORT for this case. We will stick with that tradition here, as svc_register() is called by the RPC server in the same path as sock_create_kern(). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-28SUNRPC: Clean up svc_find_xprt() calling sequenceChuck Lever1-5/+11
Clean up: add documentating comment and use appropriate data types for svc_find_xprt()'s arguments. This also eliminates a mixed sign comparison: @port was an int, while the return value of svc_xprt_local_port() is an unsigned short. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-28SUNRPC: Don't flag empty RPCB_GETADDR reply as bogusChuck Lever1-3/+8
In 2007, commit e65fe3976f594603ed7b1b4a99d3e9b867f573ea added additional sanity checking to rpcb_decode_getaddr() to make sure we were getting a reply that was long enough to be an actual universal address. If the uaddr string isn't long enough, the XDR decoder returns EIO. However, an empty string is a valid RPCB_GETADDR response if the requested service isn't registered. Moreover, "::.n.m" is also a valid RPCB_GETADDR response for IPv6 addresses that is shorter than rpcb_decode_getaddr()'s lower limit of 11. So this sanity check introduced a regression for rpcbind requests against IPv6 remotes. So revert the lower bound check added by commit e65fe3976f594603ed7b1b4a99d3e9b867f573ea, and add an explicit check for an empty uaddr string, similar to libtirpc's rpcb_getaddr(3). Pointed-out-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-27Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (37 commits) fs: avoid I_NEW inodes Merge code for single and multiple-instance mounts Remove get_init_pts_sb() Move common mknod_ptmx() calls into caller Parse mount options just once and copy them to super block Unroll essentials of do_remount_sb() into devpts vfs: simple_set_mnt() should return void fs: move bdev code out of buffer.c constify dentry_operations: rest constify dentry_operations: configfs constify dentry_operations: sysfs constify dentry_operations: JFS constify dentry_operations: OCFS2 constify dentry_operations: GFS2 constify dentry_operations: FAT constify dentry_operations: FUSE constify dentry_operations: procfs constify dentry_operations: ecryptfs constify dentry_operations: CIFS constify dentry_operations: AFS ...
2009-03-27sunrpc/svc.c: Remove unused line 'rqstp->rq_server = serv;' in svc_processideawu1-1/+0
There is no need to set rqstp->rq_server to serv, while serv is initialized as rqstp->rq_server at previous line. And between these two lines, there is no change to rqstp->rq_server. Signed-off-by: ideawu <ideawu@163.com> Reviewed-by: Tom Tucker <tom@opengridcomputing.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-03-27constify dentry_operations: restAl Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-03-26Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller3-19/+39
Conflicts: drivers/net/wimax/i2400m/usb-notif.c
2009-03-19SVCRDMA: fix recent printk format warnings.Tom Talpey1-1/+1
printk formats in prior commit were reversed/incorrect. Compiled without warning on x86 and x86_64, but detected on ppc. Signed-off-by: Tom Talpey <tmtalpey@gmail.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-19SUNRPC: Ensure we close the socket on EPIPE errors too...Trond Myklebust1-1/+1
As long as one task is holding the socket lock, then calls to xprt_force_disconnect(xprt) will not succeed in shutting down the socket. In particular, this would mean that a server initiated shutdown will not succeed until the lock is relinquished. In order to avoid the deadlock, we should ensure that xs_tcp_send_request() closes the socket on EPIPE errors too. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-19SUNRPC: xs_tcp_connect_worker{4,6}: merge common codeTrond Myklebust1-68/+72
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-19SUNRPC: Add a sysctl to control the duration of the socket linger timeoutTrond Myklebust1-2/+11
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-19SUNRPC: Add the equivalent of the linger and linger2 timeouts to RPC socketsTrond Myklebust1-17/+81
This fixes a regression against FreeBSD servers as reported by Tomas Kasparek. Apparently when using RPC over a TCP socket, the FreeBSD servers don't ever react to the client closing the socket, and so commit e06799f958bf7f9f8fae15f0c6f519953fb0257c (SUNRPC: Use shutdown() instead of close() when disconnecting a TCP socket) causes the setup to hang forever whenever the client attempts to close and then reconnect. We break the deadlock by adding a 'linger2' style timeout to the socket, after which, the client will abort the connection using a TCP 'RST'. The default timeout is set to 15 seconds. A subsequent patch will put it under user control by means of a systctl. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-18svcrpc: take advantage of tcp autotuningOlga Kornievskaia1-28/+7
Allow the NFSv4 server to make use of TCP autotuning behaviour, which was previously disabled by setting the sk_userlocks variable. Set the receive buffers to be big enough to receive the whole RPC request, and set this for the listening socket, not the accept socket. Remove the code that readjusts the receive/send buffer sizes for the accepted socket. Previously this code was used to influence the TCP window management behaviour, which is no longer needed when autotuning is enabled. This can improve IO bandwidth on networks with high bandwidth-delay products, where a large tcp window is required. It also simplifies performance tuning, since getting adequate tcp buffers previously required increasing the number of nfsd threads. Signed-off-by: Olga Kornievskaia <aglo@citi.umich.edu> Cc: Jim Rees <rees@umich.edu> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-03-18knfsd: add file to export stats about nfsd poolsGreg Banks1-1/+99
Add /proc/fs/nfsd/pool_stats to export to userspace various statistics about the operation of rpc server thread pools. This patch is based on a forward-ported version of knfsd-add-pool-thread-stats which has been shipping in the SGI "Enhanced NFS" product since 2006 and which was previously posted: http://article.gmane.org/gmane.linux.nfs/10375 It has also been updated thus: * moved EXPORT_SYMBOL() to near the function it exports * made the new struct struct seq_operations const * used SEQ_START_TOKEN instead of ((void *)1) * merged fix from SGI PV 990526 "sunrpc: use dprintk instead of printk in svc_pool_stats_*()" by Harshula Jayasuriya. * merged fix from SGI PV 964001 "Crash reading pool_stats before nfsds are started". Signed-off-by: Greg Banks <gnb@sgi.com> Signed-off-by: Harshula Jayasuriya <harshula@sgi.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-03-18knfsd: avoid overloading the CPU scheduler with enormous load averagesGreg Banks1-7/+18
Avoid overloading the CPU scheduler with enormous load averages when handling high call-rate NFS loads. When the knfsd bottom half is made aware of an incoming call by the socket layer, it tries to choose an nfsd thread and wake it up. As long as there are idle threads, one will be woken up. If there are lot of nfsd threads (a sensible configuration when the server is disk-bound or is running an HSM), there will be many more nfsd threads than CPUs to run them. Under a high call-rate low service-time workload, the result is that almost every nfsd is runnable, but only a handful are actually able to run. This situation causes two significant problems: 1. The CPU scheduler takes over 10% of each CPU, which is robbing the nfsd threads of valuable CPU time. 2. At a high enough load, the nfsd threads starve userspace threads of CPU time, to the point where daemons like portmap and rpc.mountd do not schedule for tens of seconds at a time. Clients attempting to mount an NFS filesystem timeout at the very first step (opening a TCP connection to portmap) because portmap cannot wake up from select() and call accept() in time. Disclaimer: these effects were observed on a SLES9 kernel, modern kernels' schedulers may behave more gracefully. The solution is simple: keep in each svc_pool a counter of the number of threads which have been woken but have not yet run, and do not wake any more if that count reaches an arbitrary small threshold. Testing was on a 4 CPU 4 NIC Altix using 4 IRIX clients, each with 16 synthetic client threads simulating an rsync (i.e. recursive directory listing) workload reading from an i386 RH9 install image (161480 regular files in 10841 directories) on the server. That tree is small enough to fill in the server's RAM so no disk traffic was involved. This setup gives a sustained call rate in excess of 60000 calls/sec before being CPU-bound on the server. The server was running 128 nfsds. Profiling showed schedule() taking 6.7% of every CPU, and __wake_up() taking 5.2%. This patch drops those contributions to 3.0% and 2.2%. Load average was over 120 before the patch, and 20.9 after. This patch is a forward-ported version of knfsd-avoid-nfsd-overload which has been shipping in the SGI "Enhanced NFS" product since 2006. It has been posted before: http://article.gmane.org/gmane.linux.nfs/10374 Signed-off-by: Greg Banks <gnb@sgi.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-03-13cpumask: replace node_to_cpumask with cpumask_of_node.Rusty Russell1-2/+1
Impact: cleanup node_to_cpumask (and the blecherous node_to_cpumask_ptr which contained a declaration) are replaced now everyone implements cpumask_of_node. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-03-11SUNRPC: Ensure that xs_nospace return values are propagatedTrond Myklebust1-4/+7
If xs_nospace() finds that the socket has disconnected, it attempts to return ENOTCONN, however that value is then squashed by the callers. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-11SUNRPC: Delay, then retry on connection errors.Trond Myklebust1-18/+16
Enforce the comment in xs_tcp_connect_worker4/xs_tcp_connect_worker6 that we should delay, then retry on certain connection errors. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-11SUNRPC: Return EAGAIN instead of ENOTCONN when waking up xprt->pendingTrond Myklebust3-52/+41
While we should definitely return socket errors to the task that is currently trying to send data, there is no need to propagate the same error to all the other tasks on xprt->pending. Doing so actually slows down recovery, since it causes more than one tasks to attempt socket recovery. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-11SUNRPC: Handle socket errors correctlyTrond Myklebust1-7/+5
Ensure that we pick up and handle socket errors as they occur. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-11SUNRPC: Handle ECONNREFUSED correctly in xprt_transmit()Trond Myklebust3-37/+34
If we get an ECONNREFUSED error, we currently go to sleep on the 'xprt->sending' wait queue. The problem is that no timeout is set there, and there is nothing else that will wake the task up later. We should deal with ECONNREFUSED in call_status, given that is where we also deal with -EHOSTDOWN, and friends. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-22 14:31:26 +0000