summaryrefslogtreecommitdiff
path: root/net/rfkill/rfkill-gpio.c
AgeCommit message (Collapse)AuthorFilesLines
2017-06-13net: rfkill: gpio: Switch to devm_acpi_dev_add_driver_gpios()Andy Shevchenko1-4/+1
Switch to use managed variant of acpi_dev_add_driver_gpios() to simplify error path and fix potentially wrong assingment if ->probe() fails. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-02-24net: rfkill: gpio: remove rfkill_gpio_platform_dataHeikki Krogerus1-8/+0
No more users for it. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-02-24net: rfkill: gpio: get the name and type from device propertyHeikki Krogerus1-5/+11
This prepares the driver for removal of platform data. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-01-04Bluetooth: hci_bcm: move all Broadcom ACPI IDs to BCM HCI driverHeikki Krogerus1-4/+0
The IDs should all be for Broadcom BCM43241 module, and hci_bcm is now the proper driver for them. This removes one of two different ways of handling PM with the module. Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-08-11net: rfkill: gpio: Remove BCM2E39 supportFrederic Danis1-1/+0
Power management support for BCM2E39 is now performed in Bluetooth BCM UART driver. Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-05-29net: rfkill: gpio: make better use of gpiod APIUwe Kleine-König1-14/+10
Since 39b2bbe3d715 (gpio: add flags argument to gpiod_get*() functions) which appeared in v3.17-rc1, the gpiod_get* functions take an additional parameter that allows to specify direction and initial value for output. Furthermore there is devm_gpiod_get_optional which is designed to get optional gpios. Simplify driver accordingly. Note this makes error checking more strict because only -ENOENT is ignored when searching for the GPIOs which is good. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-02-04Merge tag 'mac80211-next-for-davem-2015-02-03' of ↵David S. Miller1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Last round of updates for net-next: * revert a patch that caused a regression with mesh userspace (Bob) * fix a number of suspend/resume related races (from Emmanuel, Luca and myself - we'll look at backporting later) * add software implementations for new ciphers (Jouni) * add a new ACPI ID for Broadcom's rfkill (Mika) * allow using netns FD for wireless (Vadim) * some other cleanups (various) Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-03net: rfkill: Add Broadcom BCM2E40 bluetooth ACPI IDMika Westerberg1-0/+1
This is yet another Broadcom bluetooth chip with ACPI ID BCM2E40. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-12-14Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
2014-11-04net: rfkill: gpio: Add default GPIO driver mappings for ACPIMika Westerberg1-3/+15
The driver uses devm_gpiod_get_index(..., index) so that the index refers directly to the GpioIo resource under the ACPI device. The problem with this is that if the ordering changes we get wrong GPIOs. With ACPI 5.1 _DSD we can now use names instead to reference GPIOs analogous to Device Tree. However, we still have systems out there that do not provide _DSD at all. These systems must be supported as well. Luckily we now have acpi_dev_add_driver_gpios() that can be used to provide mappings for systems where _DSD is not provided and still take advantage of _DSD if it exists. This patch changes the driver to create default GPIO mappings if we are running on ACPI system. While there we can drop the indices completely and use devm_gpiod_get() with name instead. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: John W. Linville <linville@tuxdriver.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-20net: rfkill: drop owner assignment from platform_driversWolfram Sang1-1/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-09-22net: rfkill: gpio: Fix clock statusLoic Poulain1-1/+1
Clock is disabled when the device is blocked. So, clock_enabled is the logical negation of "blocked". Signed-off-by: Loic Poulain <loic.poulain@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-16net: rfkill: gpio: Enable module auto-loading for ACPI based switchesMarcel Holtmann1-0/+1
For the ACPI based switches the MODULE_DEVICE_TABLE is missing to export the entries for module auto-loading. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-25net: rfkill: gpio: Add more Broadcom bluetooth ACPI IDsMika Westerberg1-0/+1
This adds one more ACPI ID of a Broadcom bluetooth chip. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-nextJohn W. Linville1-11/+8
2014-05-07rfkill-gpio: Use gpio cansleep versionLoic Poulain1-11/+8
If gpio controller requires waiting for read and write GPIO values, then we have to use the gpio cansleep api. Fix the rfkill_gpio_set_power which calls only the nonsleep version (causing kernel warning). There is no problem to use the cansleep version here because we are not in IRQ handler or similar context (cf rfkill_set_block). Signed-off-by: Loic Poulain <loic.poulain@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-11net: rfkill: gpio: hard-code the gpio namesHeikki Krogerus1-17/+2
There is no need to dynamically generate the names. This will fix a static checker warning.. net/rfkill/rfkill-gpio.c:144 rfkill_gpio_probe() warn: variable dereferenced before check 'rfkill->name' Acked-by: Alexandre Courbot <acourbot@nvidia.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-11net: rfkill: gpio: add ACPI IDs for a Broadcom bluetooth chipHeikki Krogerus1-0/+5
This adds ACPI IDs for Broadcom bluetooth chip BCM43241 used on various Baytrail based boards such as Lenovo Miix 2 and Asus Transformer Book T100TA. Acked-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-11net: rfkill: gpio: add ACPI ID for GPS module on Lenovo Miix2Heikki Krogerus1-0/+1
On Lenovo Miix 2 8", BCM4752 is renamed LNV4752. Acked-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-11net: rfkill: gpio: remove unused and obsolete platform parametersHeikki Krogerus1-14/+1
After upgrading to descriptor based gpios, the gpio numbers are not used anymore. The power_clk_name and the platform specific setup and close hooks are not used by anybody, and we should not encourage use of such things, so removing them. Acked-by: Alexandre Courbot <acourbot@nvidia.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-01-07net: rfkill: gpio: convert to descriptor-based GPIO interfaceHeikki Krogerus1-43/+34
Convert to the safer gpiod_* family of API functions. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Stephen Warren <swarren@nvidia.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-28net: rfkill: gpio: add ACPI supportHeikki Krogerus1-1/+30
Including ACPI ID for Broadcom GPS receiver BCM4752. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Rhyland Klein <rklein@nvidia.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28net: rfkill: gpio: prepare for DT and ACPI supportHeikki Krogerus1-41/+51
This will add the relevant values like the gpios and the type in rfkill_gpio_platform_data to the rfkill_gpio_data structure. It will allow those values to be easily picked from DT and ACPI tables later. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Rhyland Klein <rklein@nvidia.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28net: rfkill: gpio: spinlock-safe GPIO accessHeikki Krogerus1-8/+8
This sets the direction of the gpio once when it's requested, and uses the spinlock-safe gpio_set_state() to change the state. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Rhyland Klein <rklein@nvidia.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28net: rfkill: gpio: clean up clock handlingHeikki Krogerus1-27/+8
Use a simple flag to see the state of the clock, and make the clock available even without a name. Also, get rid of HAVE_CLK dependency. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Rhyland Klein <rklein@nvidia.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28net: rfkill: gpio: convert to resource managed allocationHeikki Krogerus1-55/+20
And remove now unneeded resource freeing. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Rhyland Klein <rklein@nvidia.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-22rfkill: fix error return code in rfkill_gpio_probe()Wei Yongjun1-2/+5
Fix to return a negative error code from the error handling case instead of 0, as returned elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> [fix some indentation on the way] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-12-06rfkill: remove __dev* attributesBill Pemberton1-1/+1
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-04net/rfkill/rfkill-gpio.c: introduce missing kfreeJulia Lawall1-1/+1
Error handling code following a kmalloc should free the allocated data. The label fail_alloc already does this for rfkill. A simplified version of the semantic match that finds the problem is as follows: (http://coccinelle.lip6.fr) // <smpl> @r exists@ local idexpression x; statement S; identifier f1; position p1,p2; expression *ptr != NULL; @@ x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...x...+> } x->f1 ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-30net: rfkill: convert net/rfkill/* to use module_platform_driver()Axel Lin1-12/+1
This patch converts the drivers in net/rfkill/* to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Cc: "David S. Miller" <davem@davemloft.net> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Antonio Ospite <ospite@studenti.unina.it> Cc: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-03net:rfkill: add a gpio setup function into GPIO rfkillSangwook Lee1-0/+11
Add a gpio setup function which gives a chance to set up platform specific configuration such as pin multiplexing, input/output direction at the runtime or booting time. Signed-off-by: Sangwook Lee <sangwook.lee@linaro.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19net: rfkill: add generic gpio rfkill driverRhyland Klein1-0/+227
This adds a new generic gpio rfkill driver to support rfkill switches which are controlled by gpios. The driver also supports passing in data about the clock for the radio, so that when rfkill is blocking, it can disable the clock. This driver assumes platform data is passed from the board files to configure it for specific devices. Original-patch-by: Anantha Idapalapati <aidapalapati@nvidia.com> Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-26 07:52:51 +0000