summaryrefslogtreecommitdiff
path: root/net/rds
AgeCommit message (Collapse)AuthorFilesLines
2019-01-07rds: use DIV_ROUND_UP instead of ceilJacob Wen4-9/+5
Yes indeed, DIV_ROUND_UP is in kernel.h. Signed-off-by: Jacob Wen <jian.w.wen@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds1-1/+1
Pull networking fixes from David Miller: "Several fixes here. Basically split down the line between newly introduced regressions and long existing problems: 1) Double free in tipc_enable_bearer(), from Cong Wang. 2) Many fixes to nf_conncount, from Florian Westphal. 3) op->get_regs_len() can throw an error, check it, from Yunsheng Lin. 4) Need to use GFP_ATOMIC in *_add_hash_mac_address() of fsl/fman driver, from Scott Wood. 5) Inifnite loop in fib_empty_table(), from Yue Haibing. 6) Use after free in ax25_fillin_cb(), from Cong Wang. 7) Fix socket locking in nr_find_socket(), also from Cong Wang. 8) Fix WoL wakeup enable in r8169, from Heiner Kallweit. 9) On 32-bit sock->sk_stamp is not thread-safe, from Deepa Dinamani. 10) Fix ptr_ring wrap during queue swap, from Cong Wang. 11) Missing shutdown callback in hinic driver, from Xue Chaojing. 12) Need to return NULL on error from ip6_neigh_lookup(), from Stefano Brivio. 13) BPF out of bounds speculation fixes from Daniel Borkmann" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (57 commits) ipv6: Consider sk_bound_dev_if when binding a socket to an address ipv6: Fix dump of specific table with strict checking bpf: add various test cases to selftests bpf: prevent out of bounds speculation on pointer arithmetic bpf: fix check_map_access smin_value test when pointer contains offset bpf: restrict unknown scalars of mixed signed bounds for unprivileged bpf: restrict stack pointer arithmetic for unprivileged bpf: restrict map value pointer arithmetic for unprivileged bpf: enable access to ax register also from verifier rewrite bpf: move tmp variable into ax register in interpreter bpf: move {prev_,}insn_idx into verifier env isdn: fix kernel-infoleak in capi_unlocked_ioctl ipv6: route: Fix return value of ip6_neigh_lookup() on neigh_create() error net/hamradio/6pack: use mod_timer() to rearm timers net-next/hinic:add shutdown callback net: hns3: call hns3_nic_net_open() while doing HNAE3_UP_CLIENT ip: validate header length on virtual device xmit tap: call skb_probe_transport_header after setting skb->dev ptr_ring: wrap back ->producer in __ptr_ring_swap_queue() net: rds: remove unnecessary NULL check ...
2019-01-01net: rds: remove unnecessary NULL checkZhu Yanjun1-1/+1
In kfree, the NULL check is done. Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-28Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds1-2/+2
Pull rdma updates from Jason Gunthorpe: "This has been a fairly typical cycle, with the usual sorts of driver updates. Several series continue to come through which improve and modernize various parts of the core code, and we finally are starting to get the uAPI command interface cleaned up. - Various driver fixes for bnxt_re, cxgb3/4, hfi1, hns, i40iw, mlx4, mlx5, qib, rxe, usnic - Rework the entire syscall flow for uverbs to be able to run over ioctl(). Finally getting past the historic bad choice to use write() for command execution - More functional coverage with the mlx5 'devx' user API - Start of the HFI1 series for 'TID RDMA' - SRQ support in the hns driver - Support for new IBTA defined 2x lane widths - A big series to consolidate all the driver function pointers into a big struct and have drivers provide a 'static const' version of the struct instead of open coding initialization - New 'advise_mr' uAPI to control device caching/loading of page tables - Support for inline data in SRPT - Modernize how umad uses the driver core and creates cdev's and sysfs files - First steps toward removing 'uobject' from the view of the drivers" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (193 commits) RDMA/srpt: Use kmem_cache_free() instead of kfree() RDMA/mlx5: Signedness bug in UVERBS_HANDLER() IB/uverbs: Signedness bug in UVERBS_HANDLER() IB/mlx5: Allocate the per-port Q counter shared when DEVX is supported IB/umad: Start using dev_groups of class IB/umad: Use class_groups and let core create class file IB/umad: Refactor code to use cdev_device_add() IB/umad: Avoid destroying device while it is accessed IB/umad: Simplify and avoid dynamic allocation of class IB/mlx5: Fix wrong error unwind IB/mlx4: Remove set but not used variable 'pd' RDMA/iwcm: Don't copy past the end of dev_name() string IB/mlx5: Fix long EEH recover time with NVMe offloads IB/mlx5: Simplify netdev unbinding IB/core: Move query port to ioctl RDMA/nldev: Expose port_cap_flags2 IB/core: uverbs copy to struct or zero helper IB/rxe: Reuse code which sets port state IB/rxe: Make counters thread safe IB/mlx5: Use the correct commands for UMEM and UCTX allocation ...
2018-12-19rds: Fix warning.David S. Miller1-1/+3
>> net/rds/send.c:1109:42: warning: Using plain integer as NULL pointer Fixes: ea010070d0a7 ("net/rds: fix warn in rds_message_alloc_sgs") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19net/rds: remove user triggered WARN_ON in rds_sendmsgshamir rabinovitch4-19/+29
per comment from Leon in rdma mailing list https://lkml.org/lkml/2018/10/31/312 : Please don't forget to remove user triggered WARN_ON. https://lwn.net/Articles/769365/ "Greg Kroah-Hartman raised the problem of core kernel API code that will use WARN_ON_ONCE() to complain about bad usage; that will not generate the desired result if WARN_ON_ONCE() is configured to crash the machine. He was told that the code should just call pr_warn() instead, and that the called function should return an error in such situations. It was generally agreed that any WARN_ON() or WARN_ON_ONCE() calls that can be triggered from user space need to be fixed." in addition harden rds_sendmsg to detect and overcome issues with invalid sg count and fail the sendmsg. Suggested-by: Leon Romanovsky <leon@kernel.org> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: shamir rabinovitch <shamir.rabinovitch@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19net/rds: fix warn in rds_message_alloc_sgsshamir rabinovitch3-42/+91
redundant copy_from_user in rds_sendmsg system call expose rds to issue where rds_rdma_extra_size walk the rds iovec and and calculate the number pf pages (sgs) it need to add to the tail of rds message and later rds_cmsg_rdma_args copy the rds iovec again and re calculate the same number and get different result causing WARN_ON in rds_message_alloc_sgs. fix this by doing the copy_from_user only once per rds_sendmsg system call. When issue occur the below dump is seen: WARNING: CPU: 0 PID: 19789 at net/rds/message.c:316 rds_message_alloc_sgs+0x10c/0x160 net/rds/message.c:316 Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 19789 Comm: syz-executor827 Not tainted 4.19.0-next-20181030+ #101 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x244/0x39d lib/dump_stack.c:113 panic+0x2ad/0x55c kernel/panic.c:188 __warn.cold.8+0x20/0x45 kernel/panic.c:540 report_bug+0x254/0x2d0 lib/bug.c:186 fixup_bug arch/x86/kernel/traps.c:178 [inline] do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:271 do_invalid_op+0x36/0x40 arch/x86/kernel/traps.c:290 invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:969 RIP: 0010:rds_message_alloc_sgs+0x10c/0x160 net/rds/message.c:316 Code: c0 74 04 3c 03 7e 6c 44 01 ab 78 01 00 00 e8 2b 9e 35 fa 4c 89 e0 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d c3 e8 14 9e 35 fa <0f> 0b 31 ff 44 89 ee e8 18 9f 35 fa 45 85 ed 75 1b e8 fe 9d 35 fa RSP: 0018:ffff8801c51b7460 EFLAGS: 00010293 RAX: ffff8801bc412080 RBX: ffff8801d7bf4040 RCX: ffffffff8749c9e6 RDX: 0000000000000000 RSI: ffffffff8749ca5c RDI: 0000000000000004 RBP: ffff8801c51b7490 R08: ffff8801bc412080 R09: ffffed003b5c5b67 R10: ffffed003b5c5b67 R11: ffff8801dae2db3b R12: 0000000000000000 R13: 000000000007165c R14: 000000000007165c R15: 0000000000000005 rds_cmsg_rdma_args+0x82d/0x1510 net/rds/rdma.c:623 rds_cmsg_send net/rds/send.c:971 [inline] rds_sendmsg+0x19a2/0x3180 net/rds/send.c:1273 sock_sendmsg_nosec net/socket.c:622 [inline] sock_sendmsg+0xd5/0x120 net/socket.c:632 ___sys_sendmsg+0x7fd/0x930 net/socket.c:2117 __sys_sendmsg+0x11d/0x280 net/socket.c:2155 __do_sys_sendmsg net/socket.c:2164 [inline] __se_sys_sendmsg net/socket.c:2162 [inline] __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2162 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x44a859 Code: e8 dc e6 ff ff 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 6b cb fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f1d4710ada8 EFLAGS: 00000297 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00000000006dcc28 RCX: 000000000044a859 RDX: 0000000000000000 RSI: 0000000020001600 RDI: 0000000000000003 RBP: 00000000006dcc20 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000297 R12: 00000000006dcc2c R13: 646e732f7665642f R14: 00007f1d4710b9c0 R15: 00000000006dcd2c Kernel Offset: disabled Rebooting in 86400 seconds.. Reported-by: syzbot+26de17458aeda9d305d8@syzkaller.appspotmail.com Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: shamir rabinovitch <shamir.rabinovitch@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-12RDMA: Start use ib_device_opsKamal Heib1-2/+2
Make all the required change to start use the ib_device_ops structure. Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-3/+10
Conflicts were easy to resolve using immediate context mostly, except the cls_u32.c one where I simply too the entire HEAD chunk. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-10rds: RDS (tcp) hangs on sendto() to unresponding addressKa-Cheong Poon1-3/+10
In rds_send_mprds_hash(), if the calculated hash value is non-zero and the MPRDS connections are not yet up, it will wait. But it should not wait if the send is non-blocking. In this case, it should just use the base c_path for sending the message. Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-25Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
Version bump conflict in batman-adv, take what's in net-next. iavf conflict, adjustment of netdev_ops in net-next conflicting with poll controller method removal in net. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-23rds: Fix build regression.David S. Miller1-1/+1
Use DECLARE_* not DEFINE_* Fixes: 8360ed6745df ("RDS: IB: Use DEFINE_PER_CPU_SHARED_ALIGNED for rds_ib_stats") Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-21RDS: IB: Use DEFINE_PER_CPU_SHARED_ALIGNED for rds_ib_statsNathan Chancellor1-1/+1
Clang warns when two declarations' section attributes don't match. net/rds/ib_stats.c:40:1: warning: section does not match previous declaration [-Wsection] DEFINE_PER_CPU_SHARED_ALIGNED(struct rds_ib_statistics, rds_ib_stats); ^ ./include/linux/percpu-defs.h:142:2: note: expanded from macro 'DEFINE_PER_CPU_SHARED_ALIGNED' DEFINE_PER_CPU_SECTION(type, name, PER_CPU_SHARED_ALIGNED_SECTION) \ ^ ./include/linux/percpu-defs.h:93:9: note: expanded from macro 'DEFINE_PER_CPU_SECTION' extern __PCPU_ATTRS(sec) __typeof__(type) name; \ ^ ./include/linux/percpu-defs.h:49:26: note: expanded from macro '__PCPU_ATTRS' __percpu __attribute__((section(PER_CPU_BASE_SECTION sec))) \ ^ net/rds/ib.h:446:1: note: previous attribute is here DECLARE_PER_CPU(struct rds_ib_statistics, rds_ib_stats); ^ ./include/linux/percpu-defs.h:111:2: note: expanded from macro 'DECLARE_PER_CPU' DECLARE_PER_CPU_SECTION(type, name, "") ^ ./include/linux/percpu-defs.h:87:9: note: expanded from macro 'DECLARE_PER_CPU_SECTION' extern __PCPU_ATTRS(sec) __typeof__(type) name ^ ./include/linux/percpu-defs.h:49:26: note: expanded from macro '__PCPU_ATTRS' __percpu __attribute__((section(PER_CPU_BASE_SECTION sec))) \ ^ 1 warning generated. The initial definition was added in commit ec16227e1414 ("RDS/IB: Infiniband transport") and the cache aligned definition was added in commit e6babe4cc4ce ("RDS/IB: Stats and sysctls") right after. The definition probably should have been updated in net/rds/ib.h, which is what this patch does. Link: https://github.com/ClangBuiltLinux/linux/issues/114 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-17net: rds: use memset to optimize the recvZhu Yanjun1-4/+1
The function rds_inc_init is in recv process. To use memset can optimize the function rds_inc_init. The test result: Before: 1) + 24.950 us | rds_inc_init [rds](); After: 1) + 10.990 us | rds_inc_init [rds](); Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+4
2018-09-12rds: fix two RCU related problemsCong Wang1-1/+4
When a rds sock is bound, it is inserted into the bind_hash_table which is protected by RCU. But when releasing rds sock, after it is removed from this hash table, it is freed immediately without respecting RCU grace period. This could cause some use-after-free as reported by syzbot. Mark the rds sock with SOCK_RCU_FREE before inserting it into the bind_hash_table, so that it would be always freed after a RCU grace period. The other problem is in rds_find_bound(), the rds sock could be freed in between rhashtable_lookup_fast() and rds_sock_addref(), so we need to extend RCU read lock protection in rds_find_bound() to close this race condition. Reported-and-tested-by: syzbot+8967084bcac563795dc6@syzkaller.appspotmail.com Reported-by: syzbot+93a5839deb355537440f@syzkaller.appspotmail.com Cc: Sowmini Varadhan <sowmini.varadhan@oracle.com> Cc: Santosh Shilimkar <santosh.shilimkar@oracle.com> Cc: rds-devel@oss.oracle.com Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oarcle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-8/+3
2018-09-01rds: store socket timestamps as ktime_tArnd Bergmann2-9/+7
rds is the last in-kernel user of the old do_gettimeofday() function. Convert it over to ktime_get_real() to make it work more like the generic socket timestamps, and to let us kill off do_gettimeofday(). A follow-up patch will have to change the user space interface to deal better with 32-bit tasks, which may use an incompatible layout for 'struct timespec'. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-31net/rds: RDS is not Radio Data SystemPavel Machek1-1/+1
Getting prompt "The RDS Protocol" (RDS) is not too helpful, and it is easily confused with Radio Data System (which we may want to support in kernel, too). Signed-off-by: Pavel Machek <pavel@ucw.cz> Acked-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Acked-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-27net/rds: Use rdma_read_gids to get connection SGID/DGID in IPv6Zhu Yanjun1-7/+2
In IPv4, the newly introduced rdma_read_gids is used to read the SGID/DGID for the connection which returns GID correctly for RoCE transport as well. In IPv6, rdma_read_gids is also used. The following are why rdma_read_gids is introduced. rdma_addr_get_dgid() for RoCE for client side connections returns MAC address, instead of DGID. rdma_addr_get_sgid() for RoCE doesn't return correct SGID for IPv6 and when more than one IP address is assigned to the netdevice. So the transport agnostic rdma_read_gids() API is provided by rdma_cm module. Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-21rds: tcp: remove duplicated include from tcp.cYue Haibing1-1/+0
Remove duplicated include. Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Acked-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-16Merge branch 'linus/master' into rdma.git for-nextJason Gunthorpe30-441/+1600
rdma.git merge resolution for the 4.19 merge window Conflicts: drivers/infiniband/core/rdma_core.c - Use the rdma code and revise with the new spelling for atomic_fetch_add_unless drivers/nvme/host/rdma.c - Replace max_sge with max_send_sge in new blk code drivers/nvme/target/rdma.c - Use the blk code and revise to use NULL for ib_post_recv when appropriate - Replace max_sge with max_recv_sge in new blk code net/rds/ib_send.c - Use the net code and revise to use NULL for ib_post_recv when appropriate Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-08-16Merge tag 'v4.18' into rdma.git for-nextJason Gunthorpe9-21/+107
Resolve merge conflicts from the -rc cycle against the rdma.git tree: Conflicts: drivers/infiniband/core/uverbs_cmd.c - New ifs added to ib_uverbs_ex_create_flow in -rc and for-next - Merge removal of file->ucontext in for-next with new code in -rc drivers/infiniband/core/uverbs_main.c - for-next removed code from ib_uverbs_write() that was modified in for-rc Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-08-14rds: fix building with IPV6=mArnd Bergmann1-0/+1
When CONFIG_RDS_TCP is built-in and CONFIG_IPV6 is a loadable module, we get a link error agains the modular ipv6_chk_addr() function: net/rds/tcp.o: In function `rds_tcp_laddr_check': tcp.c:(.text+0x3b2): undefined reference to `ipv6_chk_addr' This adds back a dependency that forces RDS_TCP to also be a loadable module when IPV6 is one. Fixes: e65d4d96334e ("rds: Remove IPv6 dependency") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-07RDS: IB: fix 'passing zero to ERR_PTR()' warningYueHaibing1-0/+1
Fix a static code checker warning: net/rds/ib_frmr.c:82 rds_ib_alloc_frmr() warn: passing zero to 'ERR_PTR' The error path for ib_alloc_mr failure should set err to PTR_ERR. Fixes: 1659185fb4d0 ("RDS: IB: Support Fastreg MR (FRMR) memory registration mode") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-02Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller6-20/+39
The BTF conflicts were simple overlapping changes. The virtio_net conflict was an overlap of a fix of statistics counter, happening alongisde a move over to a bonafide statistics structure rather than counting value on the stack. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-01rds: remove redundant variable 'rds_ibdev'YueHaibing1-3/+0
Variable 'rds_ibdev' is being assigned but never used, so can be removed. fix this clang warning: net/rds/ib_send.c:762:24: warning: variable ‘rds_ibdev’ set but not used [-Wunused-but-set-variable] Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-01rds: Remove IPv6 dependencyKa-Cheong Poon12-26/+140
This patch removes the IPv6 dependency from RDS. Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-01rds: rds_ib_recv_alloc_cache() should call alloc_percpu_gfp() insteadKa-Cheong Poon3-7/+7
Currently, rds_ib_conn_alloc() calls rds_ib_recv_alloc_caches() without passing along the gfp_t flag. But rds_ib_recv_alloc_caches() and rds_ib_recv_alloc_cache() should take a gfp_t parameter so that rds_ib_recv_alloc_cache() can call alloc_percpu_gfp() using the correct flag instead of calling alloc_percpu(). Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-30RDMA, core and ULPs: Declare ib_post_send() and ib_post_recv() arguments constBart Van Assche1-3/+3
Since neither ib_post_send() nor ib_post_recv() modify the data structure their second argument points at, declare that argument const. This change makes it necessary to declare the 'bad_wr' argument const too and also to modify all ULPs that call ib_post_send(), ib_post_recv() or ib_post_srq_recv(). This patch does not change any functionality but makes it possible for the compiler to verify whether the ib_post_(send|recv|srq_recv) really do not modify the posted work request. To make this possible, only one cast had to be introduce that casts away constness, namely in rpcrdma_post_recvs(). The only way I can think of to avoid that cast is to introduce an additional loop in that function or to change the data type of bad_wr from struct ib_recv_wr ** into int (an index that refers to an element in the work request list). However, both approaches would require even more extensive changes than this patch. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-07-27net/rds/Kconfig: Correct the RDS dependsAnders Roxell1-1/+1
Remove prefix 'CONFIG_' from CONFIG_IPV6 Fixes: ba7d7e2677c0 ("net/rds/Kconfig: RDS should depend on IPV6") Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-26RDS: RDMA: Fix the NULL-ptr deref in rds_ib_get_mrAvinash Repaka6-20/+39
Registration of a memory region(MR) through FRMR/fastreg(unlike FMR) needs a connection/qp. With a proxy qp, this dependency on connection will be removed, but that needs more infrastructure patches, which is a work in progress. As an intermediate fix, the get_mr returns EOPNOTSUPP when connection details are not populated. The MR registration through sendmsg() will continue to work even with fast registration, since connection in this case is formed upfront. This patch fixes the following crash: kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Modules linked in: CPU: 1 PID: 4244 Comm: syzkaller468044 Not tainted 4.16.0-rc6+ #361 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:rds_ib_get_mr+0x5c/0x230 net/rds/ib_rdma.c:544 RSP: 0018:ffff8801b059f890 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffff8801b07e1300 RCX: ffffffff8562d96e RDX: 000000000000000d RSI: 0000000000000001 RDI: 0000000000000068 RBP: ffff8801b059f8b8 R08: ffffed0036274244 R09: ffff8801b13a1200 R10: 0000000000000004 R11: ffffed0036274243 R12: ffff8801b13a1200 R13: 0000000000000001 R14: ffff8801ca09fa9c R15: 0000000000000000 FS: 00007f4d050af700(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f4d050aee78 CR3: 00000001b0d9b006 CR4: 00000000001606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __rds_rdma_map+0x710/0x1050 net/rds/rdma.c:271 rds_get_mr_for_dest+0x1d4/0x2c0 net/rds/rdma.c:357 rds_setsockopt+0x6cc/0x980 net/rds/af_rds.c:347 SYSC_setsockopt net/socket.c:1849 [inline] SyS_setsockopt+0x189/0x360 net/socket.c:1828 do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x42/0xb7 RIP: 0033:0x4456d9 RSP: 002b:00007f4d050aedb8 EFLAGS: 00000246 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 00000000006dac3c RCX: 00000000004456d9 RDX: 0000000000000007 RSI: 0000000000000114 RDI: 0000000000000004 RBP: 00000000006dac38 R08: 00000000000000a0 R09: 0000000000000000 R10: 0000000020000380 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fffbfb36d6f R14: 00007f4d050af9c0 R15: 0000000000000005 Code: fa 48 c1 ea 03 80 3c 02 00 0f 85 cc 01 00 00 4c 8b bb 80 04 00 00 48 b8 00 00 00 00 00 fc ff df 49 8d 7f 68 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 9c 01 00 00 4d 8b 7f 68 48 b8 00 00 00 00 00 RIP: rds_ib_get_mr+0x5c/0x230 net/rds/ib_rdma.c:544 RSP: ffff8801b059f890 ---[ end trace 7e1cea13b85473b0 ]--- Reported-by: syzbot+b51c77ef956678a65834@syzkaller.appspotmail.com Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: Avinash Repaka <avinash.repaka@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-25rds: send: Fix dead code in rds_sendmsgGustavo A. R. Silva1-1/+1
Currently, code at label *out* is unreachable. Fix this by updating variable *ret* with -EINVAL, so the jump to *out* can be properly executed instead of directly returning from function. Addresses-Coverity-ID: 1472059 ("Structurally dead code") Fixes: 1e2b44e78eea ("rds: Enable RDS IPv6 support") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-25net/rds/Kconfig: RDS should depend on IPV6Anders Roxell1-1/+1
Build error, implicit declaration of function __inet6_ehashfn shows up When RDS is enabled but not IPV6. net/rds/connection.c: In function ‘rds_conn_bucket’: net/rds/connection.c:67:9: error: implicit declaration of function ‘__inet6_ehashfn’; did you mean ‘__inet_ehashfn’? [-Werror=implicit-function-declaration] hash = __inet6_ehashfn(lhash, 0, fhash, 0, rds_hash_secret); ^~~~~~~~~~~~~~~ __inet_ehashfn Current code adds IPV6 as a depends on in config RDS. Fixes: eee2fa6ab322 ("rds: Changing IP address internal representation to struct in6_addr") Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-24net/rds: Simplify ib_post_(send|recv|srq_recv)() callsBart Van Assche2-10/+5
Instead of declaring and passing a dummy 'bad_wr' pointer, pass NULL as third argument to ib_post_(send|recv|srq_recv)(). Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-07-24net/rds: Remove two WARN_ON() statementsBart Van Assche1-2/+0
Remove two WARN_ON() statements that verify something that is guaranteed by the RDMA API, namely that the failed_wr pointer is not touched if an ib_post_send() call succeeds and that it points at the failed wr if an ib_post_send() call fails. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-07-24rds: remove trailing whitespace and blank linesStephen Hemminger7-7/+0
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-23rds: Extend RDS API for IPv6 supportKa-Cheong Poon6-9/+226
There are many data structures (RDS socket options) used by RDS apps which use a 32 bit integer to store IP address. To support IPv6, struct in6_addr needs to be used. To ensure backward compatibility, a new data structure is introduced for each of those data structures which use a 32 bit integer to represent an IP address. And new socket options are introduced to use those new structures. This means that existing apps should work without a problem with the new RDS module. For apps which want to use IPv6, those new data structures and socket options can be used. IPv4 mapped address is used to represent IPv4 address in the new data structures. v4: Revert changes to SO_RDS_TRANSPORT Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-23rds: Enable RDS IPv6 supportKa-Cheong Poon14-114/+459
This patch enables RDS to use IPv6 addresses. For RDS/TCP, the listener is now an IPv6 endpoint which accepts both IPv4 and IPv6 connection requests. RDS/RDMA/IB uses a private data (struct rds_ib_connect_private) exchange between endpoints at RDS connection establishment time to support RDMA. This private data exchange uses a 32 bit integer to represent an IP address. This needs to be changed in order to support IPv6. A new private data struct rds6_ib_connect_private is introduced to handle this. To ensure backward compatibility, an IPv6 capable RDS stack uses another RDMA listener port (RDS_CM_PORT) to accept IPv6 connection. And it continues to use the original RDS_PORT for IPv4 RDS connections. When it needs to communicate with an IPv6 peer, it uses the RDS_CM_PORT to send the connection set up request. v5: Fixed syntax problem (David Miller). v4: Changed port history comments in rds.h (Sowmini Varadhan). v3: Added support to set up IPv4 connection using mapped address (David Miller). Added support to set up connection between link local and non-link addresses. Various review comments from Santosh Shilimkar and Sowmini Varadhan. v2: Fixed bound and peer address scope mismatched issue. Added back rds_connect() IPv6 changes. Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-23rds: Changing IP address internal representation to struct in6_addrKa-Cheong Poon23-369/+863
This patch changes the internal representation of an IP address to use struct in6_addr. IPv4 address is stored as an IPv4 mapped address. All the functions which take an IP address as argument are also changed to use struct in6_addr. But RDS socket layer is not modified such that it still does not accept IPv6 address from an application. And RDS layer does not accept nor initiate IPv6 connections. v2: Fixed sparse warnings. Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-18net/rds: Remove unnecessary variableHåkon Bugge1-2/+1
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-18net/rds: void function cannot return -1Håkon Bugge1-2/+0
Commit b6fb0df12db6 ("RDS/IB: Make ib_recv_refill return void") did not change the comment accordingly. Fixes: b6fb0df12db6 ("RDS/IB: Make ib_recv_refill return void") Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.ccom> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-27rds: clean up loopback rds_connections on netns deletionSowmini Varadhan3-1/+68
The RDS core module creates rds_connections based on callbacks from rds_loop_transport when sending/receiving packets to local addresses. These connections will need to be cleaned up when they are created from a netns that is not init_net, and that netns is deleted. Add the changes aligned with the changes from commit ebeeb1ad9b8a ("rds: tcp: use rds_destroy_pending() to synchronize netns/module teardown and rds connection/workq management") for rds_loop_transport Reported-and-tested-by: syzbot+4c20b3866171ce8441d2@syzkaller.appspotmail.com Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-18IB/core: add max_send_sge and max_recv_sge attributesSteve Wise1-1/+1
This patch replaces the ib_device_attr.max_sge with max_send_sge and max_recv_sge. It allows ulps to take advantage of devices that have very different send and recv sge depths. For example cxgb4 has a max_recv_sge of 4, yet a max_send_sge of 16. Splitting out these attributes allows much more efficient use of the SQ for cxgb4 with ulps that use the RDMA_RW API. Consider a large RDMA WRITE that has 16 scattergather entries. With max_sge of 4, the ulp would send 4 WRITE WRs, but with max_sge of 16, it can be done with 1 WRITE WR. Acked-by: Sagi Grimberg <sagi@grimberg.me> Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: Selvin Xavier <selvin.xavier@broadcom.com> Acked-by: Shiraz Saleem <shiraz.saleem@intel.com> Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-06-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds3-0/+11
Pull networking fixes from David Miller: 1) Various netfilter fixlets from Pablo and the netfilter team. 2) Fix regression in IPVS caused by lack of PMTU exceptions on local routes in ipv6, from Julian Anastasov. 3) Check pskb_trim_rcsum for failure in DSA, from Zhouyang Jia. 4) Don't crash on poll in TLS, from Daniel Borkmann. 5) Revert SO_REUSE{ADDR,PORT} change, it regresses various things including Avahi mDNS. From Bart Van Assche. 6) Missing of_node_put in qcom/emac driver, from Yue Haibing. 7) We lack checking of the TCP checking in one special case during SYN receive, from Frank van der Linden. 8) Fix module init error paths of mac80211 hwsim, from Johannes Berg. 9) Handle 802.1ad properly in stmmac driver, from Elad Nachman. 10) Must grab HW caps before doing quirk checks in stmmac driver, from Jose Abreu. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (81 commits) net: stmmac: Run HWIF Quirks after getting HW caps neighbour: skip NTF_EXT_LEARNED entries during forced gc net: cxgb3: add error handling for sysfs_create_group tls: fix waitall behavior in tls_sw_recvmsg tls: fix use-after-free in tls_push_record l2tp: filter out non-PPP sessions in pppol2tp_tunnel_ioctl() l2tp: reject creation of non-PPP sessions on L2TPv2 tunnels mlxsw: spectrum_switchdev: Fix port_vlan refcounting mlxsw: spectrum_router: Align with new route replace logic mlxsw: spectrum_router: Allow appending to dev-only routes ipv6: Only emit append events for appended routes stmmac: added support for 802.1ad vlan stripping cfg80211: fix rcu in cfg80211_unregister_wdev mac80211: Move up init of TXQs mac80211_hwsim: fix module init error paths cfg80211: initialize sinfo in cfg80211_get_station nl80211: fix some kernel doc tag mistakes hv_netvsc: Fix the variable sizes in ipsecv2 and rsc offload rds: avoid unenecessary cong_update in loop transport l2tp: clean up stale tunnel or session in pppol2tp_connect's error path ...
2018-06-14rds: avoid unenecessary cong_update in loop transportSantosh Shilimkar3-0/+11
Loop transport which is self loopback, remote port congestion update isn't relevant. Infact the xmit path already ignores it. Receive path needs to do the same. Reported-by: syzbot+4c20b3866171ce8441d2@syzkaller.appspotmail.com Reviewed-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-12treewide: Use array_size() in vzalloc_node()Kees Cook1-2/+4
The vzalloc_node() function has no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This patch replaces cases of: vzalloc_node(a * b, node) with: vzalloc_node(array_size(a, b), node) as well as handling cases of: vzalloc_node(a * b * c, node) with: vzalloc_node(array3_size(a, b, c), node) This does, however, attempt to ignore constant size factors like: vzalloc_node(4 * 1024, node) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( vzalloc_node( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | vzalloc_node( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( vzalloc_node( - sizeof(u8) * (COUNT) + COUNT , ...) | vzalloc_node( - sizeof(__u8) * (COUNT) + COUNT , ...) | vzalloc_node( - sizeof(char) * (COUNT) + COUNT , ...) | vzalloc_node( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | vzalloc_node( - sizeof(u8) * COUNT + COUNT , ...) | vzalloc_node( - sizeof(__u8) * COUNT + COUNT , ...) | vzalloc_node( - sizeof(char) * COUNT + COUNT , ...) | vzalloc_node( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( vzalloc_node( - sizeof(TYPE) * (COUNT_ID) + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc_node( - sizeof(TYPE) * COUNT_ID + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc_node( - sizeof(TYPE) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc_node( - sizeof(TYPE) * COUNT_CONST + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc_node( - sizeof(THING) * (COUNT_ID) + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc_node( - sizeof(THING) * COUNT_ID + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc_node( - sizeof(THING) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(THING)) , ...) | vzalloc_node( - sizeof(THING) * COUNT_CONST + array_size(COUNT_CONST, sizeof(THING)) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ vzalloc_node( - SIZE * COUNT + array_size(COUNT, SIZE) , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( vzalloc_node( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc_node( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc_node( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc_node( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc_node( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc_node( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc_node( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc_node( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( vzalloc_node( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc_node( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc_node( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc_node( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc_node( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | vzalloc_node( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( vzalloc_node( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc_node( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc_node( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc_node( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc_node( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc_node( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc_node( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc_node( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( vzalloc_node(C1 * C2 * C3, ...) | vzalloc_node( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants. @@ expression E1, E2; constant C1, C2; @@ ( vzalloc_node(C1 * C2, ...) | vzalloc_node( - E1 * E2 + array_size(E1, E2) , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook1-1/+2
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook1-1/+1
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-02Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds1-1/+1
Pull rdma fixes from Jason Gunthorpe: "Just three small last minute regressions that were found in the last week. The Broadcom fix is a bit big for rc7, but since it is fixing driver crash regressions that were merged via netdev into rc1, I am sending it. - bnxt netdev changes merged this cycle caused the bnxt RDMA driver to crash under certain situations - Arnd found (several, unfortunately) kconfig problems with the patches adding INFINIBAND_ADDR_TRANS. Reverting this last part, will fix it more fully outside -rc. - Subtle change in error code for a uapi function caused breakage in userspace. This was bug was subtly introduced cycle" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: IB/core: Fix error code for invalid GID entry IB: Revert "remove redundant INFINIBAND kconfig dependencies" RDMA/bnxt_re: Fix broken RoCE driver due to recent L2 driver changes
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-24 22:51:39 +0000