summaryrefslogtreecommitdiff
path: root/net/mac80211
AgeCommit message (Collapse)AuthorFilesLines
2013-10-28{nl,cfg,mac}80211: implement mesh channel switch userspace APIChun-Yeow Yeoh5-2/+137
Implement the required procedures for mesh channel switching as defined in the IEEE Std 802.11-2012 section 10.9.8.4.3 and also handle the CSA and MCSP elements as followed: * Add the function for updating the beacon and probe response frames with CSA and MCSP elements during the period of switching to the new channel. Both CSA and MCSP elements must be included in beacon and probe response frames until the intended channel switch time. * The ifmsh->csa_settings is set to NULL and the CSA and MCSP elements will then be removed from the beacon or probe response frames once the new channel is switched to. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28{nl,cfg,mac}80211: enable the triggering of CSA frame in meshChun-Yeow Yeoh4-54/+110
Allow the triggering of CSA frame using mesh interface. The rules are more or less same with IBSS, such as not allowed to change between the band and channel width has to be same from the previous mode. Also, move the ieee80211_send_action_csa to a common space so that it can be re-used by mesh interface. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28mac80211: process the CSA frame for mesh accordinglyChun-Yeow Yeoh5-3/+114
Process the CSA frame according to the procedures define in IEEE Std 802.11-2012 section 10.9.8.4.3 as follow: * The mesh channel switch parameters element (MCSP) must be availabe. * If the MCSP's TTL is 1, drop the frame but still process the CSA. * If the MCSP's precedence value is less than or equal to the current precedence value, drop the frame and do not process the CSA. * The CSA frame is forwarded after TTL is decremented by 1 and the initiator field is set to 0. Transmit restrict field and others are maintained as is. * No beacon or probe response frame are handled here. Also, introduce the debug message used for mesh CSA purpose. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28mac80211: refactor the parsing of chan switch ieChun-Yeow Yeoh4-41/+48
Refactor the channel switch IE parsing to reduce the number of function parameters. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28mac80211: add ieee80211_tx_prepare_skb() helper functionFelix Fietkau1-0/+29
This can be used by a driver to prepare skbs for transmission, which were obtained via functions such as ieee80211_probereq_get or ieee80211_nullfunc_get. This is useful for drivers that want to send those frames directly, but need rate control information to be prepared first. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28mac80211: fixes for mesh powersave logicMarco Porsch3-18/+22
This patch fixes errors in the mesh powersave logic which cause that remote peers do not get peer power mode change notifications and mesh peer service periods (MPSPs) got stuck. When closing a peer link, set the (now invalid) peer-specific power mode to 'unknown'. Avoid overhead when local power mode is unchanged. Reliably clear MPSP flags on peering status update. Avoid MPSP flags getting stuck by not requesting a further MPSP ownership if we already are an MPSP owner. Signed-off-by: Marco Porsch <marco@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28mac80211: Remove check for offchannel state when waking netdev queuesSeth Forshee1-3/+0
6c17b77b67587b9f9e3070fb89fe98cef3187131 ensures that a device's mac80211 queues will remain stopped while offchannel. Since the vif can no longer be offchannel when the queues wake it's not necessary to check for this before waking its netdev queues. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28mac80211: enable DFS for IBSS modeSimon Wunderlich2-5/+45
Allow changing to DFS channels if the channel is available for beaconing and userspace controls DFS operation. Channel switch announcement from other stations on DFS channels will be interpreted as radar event. These channels will then be marked as unvailable. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-28mac80211: implement SMPS for APEmmanuel Grumbach10-38/+289
When the driver requests to move to STATIC or DYNAMIC SMPS, we send an action frame to each associated station and reconfigure the channel context / driver. Of course, non-MIMO stations are ignored. The beacon isn't updated. The association response will include the original capabilities. Stations that associate while in non-OFF SMPS mode will get an action frame right after association to inform them about our current state. Note that we wait until the end of the EAPOL. Sending an action frame before the EAPOL is finished can be an issue for a few clients. Clients aren't likely to send EAPOL frames in MIMO anyway. When the SMPS configuration gets more permissive (e.g. STATIC -> OFF), we don't wake up stations that are asleep We remember that they don't know about the change and send the action frame when they wake up. When the SMPS configuration gets more restrictive (e.g. OFF -> STATIC), we set the TIM bit for every sleeping STA. uAPSD stations might send MIMO until they poll the action frame, but this is for a short period of time. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> [fix vht streams loop, initialisation] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-11mac80211: port CCMP to cryptoapi's CCM driverArd Biesheuvel5-146/+84
Use the generic CCM aead chaining mode driver rather than a local implementation that sits right on top of the core AES cipher. This allows the use of accelerated implementations of either CCM as a whole or the CTR mode which it encapsulates. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-02mac80211: implement STA CSA for drivers using channel contextsArik Nemtsov3-19/+48
Limit the current implementation to a single channel context used by a single vif, thereby avoiding multi-vif/channel complexities. Reuse the main function from AP CSA code, but move a portion out in order to fit the STA scenario. Add a new mac80211 HW flag so we don't break devices that don't support channel switch with channel-contexts. The new behavior will be opt-in. Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-01mac80211: improve default WMM parameter settingFred Zhou1-13/+14
Move the default setting for WMM parameters outside the for loop to avoid redundant assignment multiple times. Signed-off-by: Fred Zhou <fred.zy@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-01mac80211: support reporting A-MSDU subframes individuallyMichal Kazior1-1/+2
Some devices may not be able to report A-MSDUs in single buffers. Drivers for such devices were forced to re-assemble A-MSDUs which would then be eventually disassembled by mac80211. This could lead to CPU cache thrashing and poor performance. Since A-MSDU has a single sequence number all subframes share it. This was in conflict with retransmission/duplication recovery (IEEE802.11-2012: 9.3.2.10). Patch introduces a new flag that is meant to be set for all individually reported A-MSDU subframes except the last one. This ensures the last_seq_ctrl is updated after the last subframe is processed. If an A-MSDU is actually a duplicate transmission all reported subframes will be properly discarded. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> [johannes: add braces that were missing even before] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-01mac80211: use exact-size allocation for authentication frameFred Zhou1-2/+2
The authentication frame has a fixied size of 30 bytes (including header, algo num, trans seq num, and status) followed by a variable challenge text. Allocate using exact size, instead of over-allocation by sizeof(ieee80211_mgmt). Signed-off-by: Fred Zhou <fred.zy@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-01mac80211: add explicit IBSS driver operationsJohannes Berg3-2/+82
This can be useful for drivers if they have any failure cases when joining an IBSS. Also move setting the queue parameters to before this new call, in case the new driver op needs them already. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-01ieee80211: fix vht cap definitionsEliad Peller1-2/+2
VHT_CAP_BEAMFORMER_ANTENNAS cap is actually defined in the draft as VHT_CAP_BEAMFORMEE_STS_MAX, and its size is 3 bits long. VHT_CAP_SOUNDING_DIMENSIONS is also 3 bits long. Fix the definitions and change the cap masking accordingly. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-01mac80211: fix some snprintf misusesEliad Peller2-39/+42
In some debugfs related functions snprintf was used while scnprintf should have been used instead. (blindly adding the return value of snprintf and supplying it to the next snprintf might result in buffer overflow when the input is too big) Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-09-26mac80211: send a CSA action frame when changing channelSimon Wunderlich1-0/+60
IBSS members may not immediately be able to send out their beacon when performing CSA, therefore also send a CSA action frame. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-09-26mac80211: add support for CSA in IBSS modeSimon Wunderlich6-43/+480
This function adds the channel switch announcement implementation for the IBSS code. It is triggered by userspace (mac80211/cfg) or by external channel switch announcement, which have to be adopted. Both CSAs in beacons and action frames are supported. As for AP mode, the channel switch is applied after some time. However in IBSS mode, the channel switch IEs are generated in the kernel. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-09-26mac80211: split off ibss disconnectSimon Wunderlich1-80/+92
IBSS CSA will require to disconnect if a channel switch fails, but mac80211 should search and re-connect after this disconnect. To allow such usage, split off the ibss disconnect process in a separate function which only performs the disconnect without overwriting nl80211-supplied parameters. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-09-26mac80211: split off channel switch parsing functionSimon Wunderlich4-223/+262
The channel switch parsing function can be re-used for the IBSS code, put the common part into an extra function. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> [also move/rename chandef_downgrade] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-09-26mac80211: do not override fixed_rate_idx in minstrel_ht_update_statsLorenzo Bianconi1-10/+13
Do not override max_tp_rate, max_tp_rate2 and max_prob_rate configured according to fixed_rate in minstrel_ht_update_stats throughput computation Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-09-26mac80211: add fixed_rate management to minstrel rcLorenzo Bianconi1-0/+14
Add the capability to use a fixed modulation rate to minstrel rate controller Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-09-26mac80211: change beacon/connection pollingStanislaw Gruszka3-32/+10
Since when we detect beacon lost we do active AP probing (using nullfunc frame or probe request) there is no need to have beacon polling. Flags IEEE80211_STA_BEACON_POLL seems to be used just for historical reasons. Change also make that after we start connection poll due to beacon loss, next received beacon will abort the poll. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-09-26mac80211: Remove superfluous is_multicast_ether_addr() callSergey Ryazanov1-1/+1
Remove superfluous call and use locally stored previous result. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-09-26mac80211: use ERR_CAST()Johannes Berg1-1/+1
No need for ERR_PTR(PTR_ERR()) since there's ERR_CAST, use it. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-09-26mac80211: add ieee80211_iterate_active_interfaces_rtnl()Johannes Berg1-37/+34
If it is needed to disconnect multiple virtual interfaces after (WoWLAN-) suspend, the most obvious approach would be to iterate all interfaces by calling ieee80211_iterate_active_interfaces() and then call ieee80211_resume_disconnect() for each one. This is what the iwlmvm driver does. Unfortunately, this causes a locking dependency from mac80211's iflist_mtx to the key_mtx. This is problematic as the former is intentionally never held while calling any driver operation to allow drivers to iterate with their own locks held. The key_mtx is held while installing a key into the driver though, so this new lock dependency means drivers implementing the logic above can no longer hold their own lock while iterating. To fix this, add a new ieee80211_iterate_active_interfaces_rtnl() function that iterates while the RTNL is already held. This is true during suspend/resume, so that then the locking dependency isn't introduced. While at it, also refactor the various interface iterators and keep only a single implementation called by the various cases. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-28Merge branch 'for-john' of ↵John W. Linville6-17/+20
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2013-08-28Merge branch 'for-john' of ↵John W. Linville1-8/+3
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
2013-08-28Merge branch 'master' of ↵John W. Linville2-4/+33
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/iwlwifi/pcie/trans.c net/mac80211/ibss.c
2013-08-26mac80211: fix change_interface queue assignmentsJohannes Berg1-8/+11
Jouni reported that with mac80211_hwsim, multicast TX was causing crashes due to invalid vif->cab_queue assignment. It turns out that this is caused by change_interface() getting invoked and not having the vif->type/vif->p2p assigned correctly before calling the queue check (ieee80211_check_queues). Fix this by passing the 'external' interface type to the function and adjusting it accordingly. While at it, also fix the error path in change_interface, it wasn't correctly resetting to the external type but using the internal one instead. Fortunately this affects on hwsim because all other drivers set the vif->type/vif->p2p variables when changing iftype. This shouldn't be needed, but almost all implementations actually do it for their own internal handling. Reported-by: Jouni Malinen <j@w1.fi> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-23mac80211: ignore (E)CSA in probe response framesJohannes Berg1-8/+3
Seth reports that some APs, notably the Netgear WNDAP360, send invalid ECSA IEs in probe response frames with the operating class and channel number both set to zero, even when no channel switch is being done. As a result, any scan while connected to such an AP results in the connection being dropped. Fix this by ignoring any channel switch announcment in probe response frames entirely, since we're connected to the AP we will be receiving a beacon (and maybe even an action frame) if a channel switch is done, which is sufficient. Cc: stable@vger.kernel.org # 3.10 Reported-by: Seth Forshee <seth.forshee@canonical.com> Tested-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-23cfg80211: add flags to cfg80211_rx_mgmt()Vladimir Kondratiev1-2/+1
Add flags intended to report various auxiliary information and introduce the NL80211_RXMGMT_FLAG_ANSWERED flag to report that the frame was already answered by the device. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> [REPLIED->ANSWERED, reword commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-23mac80211: assign seqnums for group QoS framesBob Copeland1-2/+4
According to 802.11-2012 9.3.2.10, paragraph 4, QoS data frames with a group address in the Address 1 field have sequence numbers allocated from the same counter as non-QoS data and management frames. Without this flag, some drivers may not assign sequence numbers, and in rare cases frames might get dropped. Set the control flag accordingly. Signed-off-by: Bob Copeland <bob@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-23mac80211: only respond to probe request with mesh IDChun-Yeow Yeoh1-0/+3
Previously, the mesh STA responds to probe request from legacy STA but now it will only respond to legacy STA if the legacy STA does include the specific mesh ID or wildcard mesh ID in the probe request. The iw patch "iw: scan using meshid" can be used either by legacy STA or by mesh STA to do active scanning by inserting the mesh ID in the probe request frame. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@cozybit.com> Acked-by: Thomas Pedersen <thomas@cozybit.com> Acked-by: Javier Cardona <javier@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-23mac80211: move setting WIPHY_FLAG_SUPPORTS_SCHED_SCAN into driversJohannes Berg1-3/+0
mac80211 currently sets WIPHY_FLAG_SUPPORTS_SCHED_SCAN based on whether the start_sched_scan operation is supported or not, but that will not be correct for all drivers, we're adding scheduled scan to the iwlmvm driver but it depends on firmware support. Therefore, move setting WIPHY_FLAG_SUPPORTS_SCHED_SCAN into the drivers so that they can control it regardless of implementing the operation. This currently only affects the TI drivers since they're the only ones implementing scheduled scan (in a mac80211 driver.) Acked-by: Luciano Coelho <luca@coelho.fi> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-22mac80211: minstrel_ht: don't use control.flags in TX status pathJohannes Berg1-2/+1
Sujith reports that my commit af61a165187bb94b1dc7628ef815c23d0eacf40b ("mac80211: add control port protocol TX control flag") broke ath9k (aggregation). The reason is that I made minstrel_ht use the flag in the TX status path, where it can have been overwritten by the driver. Since we have no more space in info->flags, revert that part of the change for now, until we can reshuffle the flags or so. Reported-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-21mac80211: ibss: fix ignored channel parameterSimon Wunderlich1-4/+29
my earlier patch "mac80211: change IBSS channel state to chandef" created a regression by ignoring the channel parameter in __ieee80211_sta_join_ibss, which breaks IBSS channel selection. This patch fixes this situation by using the right channel and adopting the selected bandwidth mode. Cc: stable@vger.kernel.org Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-21mac80211: add a flag to indicate CCK support for HT clientsFelix Fietkau1-0/+3
brcm80211 cannot handle sending frames with CCK rates as part of an A-MPDU session. Other drivers may have issues too. Set the flag in all drivers that have been tested with CCK rates. This fixes a reported brcmsmac regression introduced in commit ef47a5e4f1aaf1d0e2e6875e34b2c9595897bef6 "mac80211/minstrel_ht: fix cck rate sampling" Cc: stable@vger.kernel.org # 3.10 Reported-by: Tom Gundersen <teg@jklm.no> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-21mac80211: add missing channel context releaseJohannes Berg1-0/+1
IBSS needs to release the channel context when leaving but I evidently missed that. Fix it. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-16Merge branch 'for-john' of ↵John W. Linville10-303/+516
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2013-08-16mac80211: add APIs to allow keeping connections after WoWLANJohannes Berg2-8/+148
In order to be able to (securely) keep connections alive after the system was suspended for WoWLAN, we need some additional APIs. We already have API (ieee80211_gtk_rekey_notify) to tell wpa_supplicant about the new replay counter if GTK rekeying was done by the device while the host was asleep, but that's not sufficient. If GTK rekeying wasn't done, we need to tell the host about sequence counters for the GTK (and PTK regardless of rekeying) that was used while asleep, add ieee80211_set_key_rx_seq() for that. If GTK rekeying was done, then we need to be able to disable the old keys (with ieee80211_remove_key()) and allocate the new GTK key(s) in mac80211 (with ieee80211_gtk_rekey_add()). If protocol offload (e.g. ARP) is implemented, then also the TX sequence counter for the PTK must be updated, using the new ieee80211_set_key_tx_seq() function. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-16mac80211: move ibss presp generation in own functionSimon Wunderlich1-76/+109
Channel Switch will later require to generate beacons without setting them immediately. Therefore split the presp generation in an own function. Splitting the original very long function might be a good idea anyway. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-16mac80211: perform power save processing before decryptionJohan Almbladh1-202/+202
This patch decouples the power save processing from the frame decryption by running the decrypt rx handler after sta_process. In the case where the decryption failed for some reason, the stack used to not process the PM and MOREDATA bits for that frame. The stack now always performs power save processing regardless of the decryption result. That means that encrypted data frames and NULLFUNC frames are now handled in the same way regarding power save processing, making the stack more robust. Signed-off-by: Johan Almbladh <ja@anyfi.net> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-12mac80211: ibss - do not scan if not needed when creating an IBSSAntonio Quartulli1-0/+11
In some cases mac80211 will scan before creating an IBSS even if bssid and frequency have been forced by the user. This is not needed and leads only to a delay in the IBSS establishment phase. Immediately create the cell if both bssid and frequency (and fixed_freq is set) have been specified. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-12mac80211: add vif to testmode cmdDavid Spinadel1-1/+10
Pass the wdev from cfg80211 on to the driver as the vif if given and it's valid for the driver. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-12cfg80211: add wdev to testmode cmdDavid Spinadel1-1/+3
To allow drivers to implement per-interface testmode operations more easily, pass a wdev pointer if any identification for one was given from userspace. Clean up the code a bit while at it. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-12mac80211: add control port protocol TX control flagJohannes Berg2-5/+8
A lot of drivers check the frame protocol for ETH_P_PAE, for various reasons (like making those more reliable). Add a new flags bitmap to the TX control info and a new flag indicating the control port protocol is in use to let all drivers also apply such logic to other control port protocols, should they be configured. Also use the new flag in the iwlwifi drivers. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-09Merge branch 'for-john' of ↵John W. Linville12-33/+497
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2013-08-09Merge branch 'master' of ↵John W. Linville3-20/+45
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-09 15:01:18 +0000