summaryrefslogtreecommitdiff
path: root/net/mac80211/airtime.c
AgeCommit message (Collapse)AuthorFilesLines
2024-09-06wifi: mac80211: introduce EHT rate support in AQL airtimeMing Yen Hsieh1-6/+134
Add definitions related to EHT mode and airtime calculation according to the 802.11BE_D4.0. Co-developed-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Quan Zhou <quan.zhou@mediatek.com> Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com> Link: https://patch.msgid.link/20240904111256.11734-1-mingyen.hsieh@mediatek.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-13wifi: mac80211: Sanity check tx bitrate if not provided by driverStephen Douthit1-1/+1
If the driver doesn't fill NL80211_STA_INFO_TX_BITRATE in sta_set_sinfo() then as a fallback sta->deflink.tx_stats.last_rate is used. Unfortunately there's no guarantee that this has actually been set before it's used. Originally found when 'iw <dev> link' would always return a tx rate of 6Mbps regardless of actual link speed for the QCA9337 running firmware WLAN.TF.2.1-00021-QCARMSWP-1 in my netbook. Use the sanity check logic from ieee80211_fill_rx_status() and refactor that to use the new inline function. Signed-off-by: Stephen Douthit <stephen.douthit@gmail.com> Link: https://lore.kernel.org/r/20230213204024.3377-1-stephen.douthit@gmail.com [change to bool ..._rate_valid() instead of int ..._rate_invalid()] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-13wifi: mac80211: remove shifted rate supportJohannes Berg1-5/+3
We really cannot even get into this as we can't have a BSS with a 5/10 MHz (scan) width, and therefore all the code handling shifted rates cannot happen. Remove it all, since it's broken anyway, at least with MLO. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-11-25wifi: mac8021: fix possible oob access in ieee80211_get_rate_durationLorenzo Bianconi1-0/+3
Fix possible out-of-bound access in ieee80211_get_rate_duration routine as reported by the following UBSAN report: UBSAN: array-index-out-of-bounds in net/mac80211/airtime.c:455:47 index 15 is out of range for type 'u16 [12]' CPU: 2 PID: 217 Comm: kworker/u32:10 Not tainted 6.1.0-060100rc3-generic Hardware name: Acer Aspire TC-281/Aspire TC-281, BIOS R01-A2 07/18/2017 Workqueue: mt76 mt76u_tx_status_data [mt76_usb] Call Trace: <TASK> show_stack+0x4e/0x61 dump_stack_lvl+0x4a/0x6f dump_stack+0x10/0x18 ubsan_epilogue+0x9/0x43 __ubsan_handle_out_of_bounds.cold+0x42/0x47 ieee80211_get_rate_duration.constprop.0+0x22f/0x2a0 [mac80211] ? ieee80211_tx_status_ext+0x32e/0x640 [mac80211] ieee80211_calc_rx_airtime+0xda/0x120 [mac80211] ieee80211_calc_tx_airtime+0xb4/0x100 [mac80211] mt76x02_send_tx_status+0x266/0x480 [mt76x02_lib] mt76x02_tx_status_data+0x52/0x80 [mt76x02_lib] mt76u_tx_status_data+0x67/0xd0 [mt76_usb] process_one_work+0x225/0x400 worker_thread+0x50/0x3e0 ? process_one_work+0x400/0x400 kthread+0xe9/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 Fixes: db3e1c40cf2f ("mac80211: Import airtime calculation code from mt76") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: mac80211: move some future per-link data to bss_confJohannes Berg1-2/+2
To add MLD, reuse the bss_conf structure later for per-link information, so move some things into it that are per link. Most transformations were done with the following spatch: @@ expression sdata; identifier var = { chanctx_conf, mu_mimo_owner, csa_active, color_change_active, color_change_color }; @@ -sdata->vif.var +sdata->vif.bss_conf.var @@ struct ieee80211_vif *vif; identifier var = { chanctx_conf, mu_mimo_owner, csa_active, color_change_active, color_change_color }; @@ -vif->var +vif->bss_conf.var Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-04-11mac80211: prepare sta handling for MLO supportSriram R1-2/+2
Currently in mac80211 each STA object is represented using sta_info datastructure with the associated STA specific information and drivers access ieee80211_sta part of it. With MLO (Multi Link Operation) support being added in 802.11be standard, though the association is logically with a single Multi Link capable STA, at the physical level communication can happen via different advertised links (uniquely identified by Channel, operating class, BSSID) and hence the need to handle multiple link STA parameters within a composite sta_info object called the MLD STA. The different link STA part of MLD STA are identified using the link address which can be same or different as the MLD STA address and unique link id based on the link vif. To support extension of such a model, the sta_info datastructure is modified to hold multiple link STA objects with link specific params currently within sta_info moved to this new structure. Similarly this is done for ieee80211_sta as well which will be accessed within mac80211 as well as by drivers, hence trivial driver changes are expected to support this. For current non MLO supported drivers, only one link STA is present and link information is accessed via 'deflink' member. For MLO drivers, we still need to define the APIs etc. to get the correct link ID and access the correct part of the station info. Currently in mac80211, all link STA info are accessed directly via deflink. These will be updated to access via link pointers indexed by link id with MLO support patches, with link id being 0 for non MLO supported cases. Except for couple of macro related changes, below spatch takes care of updating mac80211 and driver code to access to the link STA info via deflink. @ieee80211_sta@ struct ieee80211_sta *s; struct sta_info *si; identifier var = {supp_rates, ht_cap, vht_cap, he_cap, he_6ghz_capa, eht_cap, rx_nss, bandwidth, txpwr}; @@ ( s-> - var + deflink.var | si->sta. - var + deflink.var ) @sta_info@ struct sta_info *si; identifier var = {gtk, pcpu_rx_stats, rx_stats, rx_stats_avg, status_stats, tx_stats, cur_max_bandwidth}; @@ ( si-> - var + deflink.var ) Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Link: https://lore.kernel.org/r/1649086883-13246-1-git-send-email-quic_srirrama@quicinc.com [remove MLO-drivers notes from commit message, not clear yet; run spatch] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-03-11mac80211: correct legacy rates check in ieee80211_calc_rx_airtimeMeiChia Chiu1-1/+3
There are no legacy rates on 60GHz or sub-1GHz band, so modify the check. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: MeiChia Chiu <MeiChia.Chiu@mediatek.com> Link: https://lore.kernel.org/r/20220308021645.16272-1-MeiChia.Chiu@mediatek.com [Ghz -> GHz] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-04mac80211: remove unused macrosJohannes Berg1-6/+0
Various macros in mac80211 aren't used, remove them. In one case it's used under ifdef, so ifdef it for the W=2 warning. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220202104617.5172d7fd878e.I2f1fce686a2b71003f083b2566fb09cf16b8165a@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-04mac80211: airtime: avoid variable shadowingJohannes Berg1-2/+3
This isn't very dangerous, since the outer 'rate' variable isn't even a pointer, but it's still confusing, so use a different variable inside. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220202104617.8e9b2bfaa0f5.I41c53f754eef28206d04dafc7263ccb99b63d490@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: add AQL support for VHT160 tx ratesFelix Fietkau1-1/+3
When converting from struct ieee80211_tx_rate to ieee80211_rx_status, there was one check missing to fill in the bandwidth for 160 MHz Signed-off-by: Felix Fietkau <nbd@nbd.name> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20200915085945.3782-2-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-18mac80211: extend AQL aggregation estimation to HE and fix unit mismatchFelix Fietkau1-5/+11
The unit of the return value of ieee80211_get_rate_duration is nanoseconds, not microseconds. Adjust the duration checks to account for that. For higher data rates, allow larger estimated aggregation sizes, and add some values for HE as well, which can use much larger aggregates. Since small packets with high data rates can now lead to duration values too small for info->tx_time_est, return a minimum of 4us. Fixes: f01cfbaf9b29 ("mac80211: improve AQL aggregation estimation for low data rates") Signed-off-by: Felix Fietkau <nbd@nbd.name> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20200915085945.3782-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-08-27mac80211: improve AQL aggregation estimation for low data ratesFelix Fietkau1-12/+26
Links with low data rates use much smaller aggregates and are much more sensitive to latency added by bufferbloat. Tune the assumed aggregation length based on the tx rate duration. Signed-off-by: Felix Fietkau <nbd@nbd.name> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20200821163045.62140-3-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-08-27mac80211: factor out code to look up the average packet length duration for ↵Felix Fietkau1-47/+74
a rate This will be used to enhance AQL estimated aggregation length Signed-off-by: Felix Fietkau <nbd@nbd.name> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20200821163045.62140-2-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-08-27mac80211: use rate provided via status->rate on ieee80211_tx_status_ext for AQLFelix Fietkau1-2/+51
Since ieee80211_tx_info does not have enough room to encode HE rates, HE drivers use status->rate to provide rate info. Store it in struct sta_info and use it for AQL. Signed-off-by: Felix Fietkau <nbd@nbd.name> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20200821163045.62140-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-07-31mac80211: improve AQL tx airtime estimationFelix Fietkau1-5/+21
AQL does not take into account that most HT/VHT/HE traffic is A-MPDU aggregated. Because of that, the per-packet airtime overhead is vastly overestimated. Improve it by assuming an average aggregation length of 16 for non-legacy traffic if not using the VO AC queue. This should improve performance with high data rates, especially with multiple stations Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20200724182816.18678-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-12-13mac80211: airtime: Fix an off by one in ieee80211_calc_rx_airtime()Dan Carpenter1-1/+1
This code was copied from mt76 and inherited an off by one bug from there. The > should be >= so that we don't read one element beyond the end of the array. Fixes: db3e1c40cf2f ("mac80211: Import airtime calculation code from mt76") Reported-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20191126120910.ftr4t7me3by32aiz@kili.mountain Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-11-22mac80211: Import airtime calculation code from mt76Toke Høiland-Jørgensen1-0/+597
Felix recently added code to calculate airtime of packets to the mt76 driver. Import this into mac80211 so we can use it for airtime queue limit calculations. The airtime.c file is copied verbatim from the mt76 driver, and adjusted to be usable in mac80211. This involves: - Switching to mac80211 data structures. - Adding support for 160 MHz channels and HE mode. - Moving the symbol and duration calculations around a bit to avoid rounding with the higher rates and longer symbol times used for HE rates. The per-rate TX rate calculation is also split out to its own function so it can be used directly for the AQL calculations later. Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20191119060610.76681-3-kyan@google.com [fix HE_GROUP_IDX() to use 3 * bw, since there are 3 _gi values] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-19 08:24:21 +0000