summaryrefslogtreecommitdiff
path: root/net/kcm
AgeCommit message (Collapse)AuthorFilesLines
2020-07-24net: pass a sockptr_t into ->setsockoptChristoph Hellwig1-3/+3
Rework the remaining setsockopt code to pass a sockptr_t instead of a plain user pointer. This removes the last remaining set_fs(KERNEL_DS) outside of architecture specific code. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> [ieee802154] Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada1-1/+1
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-03-16net: kcm: kcmproc.c: Fix RCU list suspicious usage warningMadhuparna Bhowmik1-1/+1
This path fixes the suspicious RCU usage warning reported by kernel test robot. net/kcm/kcmproc.c:#RCU-list_traversed_in_non-reader_section There is no need to use list_for_each_entry_rcu() in kcm_stats_seq_show() as the list is always traversed under knet->mutex held. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-24bpf: Use bpf_prog_run_pin_on_cpu() at simple call sites.David Miller1-3/+1
All of these cases are strictly of the form: preempt_disable(); BPF_PROG_RUN(...); preempt_enable(); Replace this with bpf_prog_run_pin_on_cpu() which wraps BPF_PROG_RUN() with: migrate_disable(); BPF_PROG_RUN(...); migrate_enable(); On non RT enabled kernels this maps to preempt_disable/enable() and on RT enabled kernels this solely prevents migration, which is sufficient as there is no requirement to prevent reentrancy to any BPF program from a preempting task. The only requirement is that the program stays on the same CPU. Therefore, this is a trivially correct transformation. The seccomp loop does not need protection over the loop. It only needs protection per BPF filter program [ tglx: Converted to bpf_prog_run_pin_on_cpu() ] Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200224145643.691493094@linutronix.de
2019-09-27kcm: disable preemption in kcm_parse_func_strparser()Eric Dumazet1-1/+5
After commit a2c11b034142 ("kcm: use BPF_PROG_RUN") syzbot easily triggers the warning in cant_sleep(). As explained in commit 6cab5e90ab2b ("bpf: run bpf programs with preemption disabled") we need to disable preemption before running bpf programs. BUG: assuming atomic context at net/kcm/kcmsock.c:382 in_atomic(): 0, irqs_disabled(): 0, pid: 7, name: kworker/u4:0 3 locks held by kworker/u4:0/7: #0: ffff888216726128 ((wq_completion)kstrp){+.+.}, at: __write_once_size include/linux/compiler.h:226 [inline] #0: ffff888216726128 ((wq_completion)kstrp){+.+.}, at: arch_atomic64_set arch/x86/include/asm/atomic64_64.h:34 [inline] #0: ffff888216726128 ((wq_completion)kstrp){+.+.}, at: atomic64_set include/asm-generic/atomic-instrumented.h:855 [inline] #0: ffff888216726128 ((wq_completion)kstrp){+.+.}, at: atomic_long_set include/asm-generic/atomic-long.h:40 [inline] #0: ffff888216726128 ((wq_completion)kstrp){+.+.}, at: set_work_data kernel/workqueue.c:620 [inline] #0: ffff888216726128 ((wq_completion)kstrp){+.+.}, at: set_work_pool_and_clear_pending kernel/workqueue.c:647 [inline] #0: ffff888216726128 ((wq_completion)kstrp){+.+.}, at: process_one_work+0x88b/0x1740 kernel/workqueue.c:2240 #1: ffff8880a989fdc0 ((work_completion)(&strp->work)){+.+.}, at: process_one_work+0x8c1/0x1740 kernel/workqueue.c:2244 #2: ffff888098998d10 (sk_lock-AF_INET){+.+.}, at: lock_sock include/net/sock.h:1522 [inline] #2: ffff888098998d10 (sk_lock-AF_INET){+.+.}, at: strp_sock_lock+0x2e/0x40 net/strparser/strparser.c:440 CPU: 0 PID: 7 Comm: kworker/u4:0 Not tainted 5.3.0+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: kstrp strp_work Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 __cant_sleep kernel/sched/core.c:6826 [inline] __cant_sleep.cold+0xa4/0xbc kernel/sched/core.c:6803 kcm_parse_func_strparser+0x54/0x200 net/kcm/kcmsock.c:382 __strp_recv+0x5dc/0x1b20 net/strparser/strparser.c:221 strp_recv+0xcf/0x10b net/strparser/strparser.c:343 tcp_read_sock+0x285/0xa00 net/ipv4/tcp.c:1639 strp_read_sock+0x14d/0x200 net/strparser/strparser.c:366 do_strp_work net/strparser/strparser.c:414 [inline] strp_work+0xe3/0x130 net/strparser/strparser.c:423 process_one_work+0x9af/0x1740 kernel/workqueue.c:2269 Fixes: a2c11b034142 ("kcm: use BPF_PROG_RUN") Fixes: 6cab5e90ab2b ("bpf: run bpf programs with preemption disabled") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-06kcm: use BPF_PROG_RUNSami Tolvanen1-1/+1
Instead of invoking struct bpf_prog::bpf_func directly, use the BPF_PROG_RUN macro. Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Acked-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-07-30net: Use skb_frag_off accessorsJonathan Lemon1-1/+1
Use accessor functions for skb fragment's page_offset instead of direct references, in preparation for bvec conversion. Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-22net: Use skb accessors in network coreMatthew Wilcox (Oracle)1-4/+4
In preparation for unifying the skb_frag and bio_vec, use the fine accessors which already exist and use skb_frag_t instead of struct skb_frag_struct. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner1-4/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner2-0/+2
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-01kcm: switch order of device registration to fix a crashJiri Slaby1-8/+8
When kcm is loaded while many processes try to create a KCM socket, a crash occurs: BUG: unable to handle kernel NULL pointer dereference at 000000000000000e IP: mutex_lock+0x27/0x40 kernel/locking/mutex.c:240 PGD 8000000016ef2067 P4D 8000000016ef2067 PUD 3d6e9067 PMD 0 Oops: 0002 [#1] SMP KASAN PTI CPU: 0 PID: 7005 Comm: syz-executor.5 Not tainted 4.12.14-396-default #1 SLE15-SP1 (unreleased) RIP: 0010:mutex_lock+0x27/0x40 kernel/locking/mutex.c:240 RSP: 0018:ffff88000d487a00 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 000000000000000e RCX: 1ffff100082b0719 ... CR2: 000000000000000e CR3: 000000004b1bc003 CR4: 0000000000060ef0 Call Trace: kcm_create+0x600/0xbf0 [kcm] __sock_create+0x324/0x750 net/socket.c:1272 ... This is due to race between sock_create and unfinished register_pernet_device. kcm_create tries to do "net_generic(net, kcm_net_id)". but kcm_net_id is not initialized yet. So switch the order of the two to close the race. This can be reproduced with mutiple processes doing socket(PF_KCM, ...) and one process doing module removal. Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module") Reviewed-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23kcm: Remove unnecessary SLAB_PANIC for kmem_cache_create() in kcm_initYueHaibing1-2/+2
There has check NULL on kmem_cache_create on failure in kcm_init, no need use SLAB_PANIC to panic the system. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-24net: remove blank lines at end of fileStephen Hemminger2-2/+0
Several files have extra line at end of file. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-28Revert changes to convert to ->poll_mask() and aio IOCB_CMD_POLLLinus Torvalds1-5/+5
The poll() changes were not well thought out, and completely unexplained. They also caused a huge performance regression, because "->poll()" was no longer a trivial file operation that just called down to the underlying file operations, but instead did at least two indirect calls. Indirect calls are sadly slow now with the Spectre mitigation, but the performance problem could at least be largely mitigated by changing the "->get_poll_head()" operation to just have a per-file-descriptor pointer to the poll head instead. That gets rid of one of the new indirections. But that doesn't fix the new complexity that is completely unwarranted for the regular case. The (undocumented) reason for the poll() changes was some alleged AIO poll race fixing, but we don't make the common case slower and more complex for some uncommon special case, so this all really needs way more explanations and most likely a fundamental redesign. [ This revert is a revert of about 30 different commits, not reverted individually because that would just be unnecessarily messy - Linus ] Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-04Merge branch 'work.aio-1' of ↵Linus Torvalds1-5/+5
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull aio updates from Al Viro: "Majority of AIO stuff this cycle. aio-fsync and aio-poll, mostly. The only thing I'm holding back for a day or so is Adam's aio ioprio - his last-minute fixup is trivial (missing stub in !CONFIG_BLOCK case), but let it sit in -next for decency sake..." * 'work.aio-1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits) aio: sanitize the limit checking in io_submit(2) aio: fold do_io_submit() into callers aio: shift copyin of iocb into io_submit_one() aio_read_events_ring(): make a bit more readable aio: all callers of aio_{read,write,fsync,poll} treat 0 and -EIOCBQUEUED the same way aio: take list removal to (some) callers of aio_complete() aio: add missing break for the IOCB_CMD_FDSYNC case random: convert to ->poll_mask timerfd: convert to ->poll_mask eventfd: switch to ->poll_mask pipe: convert to ->poll_mask crypto: af_alg: convert to ->poll_mask net/rxrpc: convert to ->poll_mask net/iucv: convert to ->poll_mask net/phonet: convert to ->poll_mask net/nfc: convert to ->poll_mask net/caif: convert to ->poll_mask net/bluetooth: convert to ->poll_mask net/sctp: convert to ->poll_mask net/tipc: convert to ->poll_mask ...
2018-06-04Merge branch 'hch.procfs' of ↵Linus Torvalds1-72/+11
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull procfs updates from Al Viro: "Christoph's proc_create_... cleanups series" * 'hch.procfs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (44 commits) xfs, proc: hide unused xfs procfs helpers isdn/gigaset: add back gigaset_procinfo assignment proc: update SIZEOF_PDE_INLINE_NAME for the new pde fields tty: replace ->proc_fops with ->proc_show ide: replace ->proc_fops with ->proc_show ide: remove ide_driver_proc_write isdn: replace ->proc_fops with ->proc_show atm: switch to proc_create_seq_private atm: simplify procfs code bluetooth: switch to proc_create_seq_data netfilter/x_tables: switch to proc_create_seq_private netfilter/xt_hashlimit: switch to proc_create_{seq,single}_data neigh: switch to proc_create_seq_data hostap: switch to proc_create_{seq,single}_data bonding: switch to proc_create_seq_data rtc/proc: switch to proc_create_single_data drbd: switch to proc_create_single resource: switch to proc_create_seq_data staging/rtl8192u: simplify procfs code jfs: simplify procfs code ...
2018-06-01kcm: Fix use-after-free caused by clonned socketsKirill Tkhai1-1/+1
(resend for properly queueing in patchwork) kcm_clone() creates kernel socket, which does not take net counter. Thus, the net may die before the socket is completely destructed, i.e. kcm_exit_net() is executed before kcm_done(). Reported-by: syzbot+5f1a04e374a635efc426@syzkaller.appspotmail.com Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-26net: convert datagram_poll users tp ->poll_maskChristoph Hellwig1-5/+5
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-16proc: introduce proc_create_net_singleChristoph Hellwig1-14/+2
Variant of proc_create_data that directly take a seq_file show callback and deals with network namespaces in ->open and ->release. All callers of proc_create + single_open_net converted over, and single_{open,release}_net are removed entirely. Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-16proc: introduce proc_create_net{,_data}Christoph Hellwig1-14/+2
Variants of proc_create{,_data} that directly take a struct seq_operations and deal with network namespaces in ->open and ->release. All callers of proc_create + seq_open_net converted over, and seq_{open,release}_net are removed entirely. Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-16net/kcm: simplify proc registrationChristoph Hellwig1-54/+17
Remove a couple indirections to make the code look like most other protocols. Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-03-27net: Drop pernet_operations::asyncKirill Tkhai2-2/+0
Synchronous pernet_operations are not allowed anymore. All are asynchronous. So, drop the structure member. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26net: Use octal not symbolic permissionsJoe Perches1-2/+2
Prefer the direct use of octal for permissions. Done with checkpatch -f --types=SYMBOLIC_PERMS --fix-inplace and some typing. Miscellanea: o Whitespace neatening around these conversions. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-10/+23
Fun set of conflict resolutions here... For the mac80211 stuff, these were fortunately just parallel adds. Trivially resolved. In drivers/net/phy/phy.c we had a bug fix in 'net' that moved the function phy_disable_interrupts() earlier in the file, whilst in 'net-next' the phy_error() call from this function was removed. In net/ipv4/xfrm4_policy.c, David Ahern's changes to remove the 'rt_table_id' member of rtable collided with a bug fix in 'net' that added a new struct member "rt_mtu_locked" which needs to be copied over here. The mlxsw driver conflict consisted of net-next separating the span code and definitions into separate files, whilst a 'net' bug fix made some changes to that moved code. The mlx5 infiniband conflict resolution was quite non-trivial, the RDMA tree's merge commit was used as a guide here, and here are their notes: ==================== Due to bug fixes found by the syzkaller bot and taken into the for-rc branch after development for the 4.17 merge window had already started being taken into the for-next branch, there were fairly non-trivial merge issues that would need to be resolved between the for-rc branch and the for-next branch. This merge resolves those conflicts and provides a unified base upon which ongoing development for 4.17 can be based. Conflicts: drivers/infiniband/hw/mlx5/main.c - Commit 42cea83f9524 (IB/mlx5: Fix cleanup order on unload) added to for-rc and commit b5ca15ad7e61 (IB/mlx5: Add proper representors support) add as part of the devel cycle both needed to modify the init/de-init functions used by mlx5. To support the new representors, the new functions added by the cleanup patch needed to be made non-static, and the init/de-init list added by the representors patch needed to be modified to match the init/de-init list changes made by the cleanup patch. Updates: drivers/infiniband/hw/mlx5/mlx5_ib.h - Update function prototypes added by representors patch to reflect new function names as changed by cleanup patch drivers/infiniband/hw/mlx5/ib_rep.c - Update init/de-init stage list to match new order from cleanup patch ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-16kcm: lock lower socket in kcm_attachTom Herbert1-10/+23
Need to lock lower socket in order to provide mutual exclusion with kcm_unattach. v2: Add Reported-by for syzbot Fixes: ab7ac4eb9832e32a09f4e804 ("kcm: Kernel Connection Multiplexor module") Reported-by: syzbot+ea75c0ffcd353d32515f064aaebefc5279e6161e@syzkaller.appspotmail.com Signed-off-by: Tom Herbert <tom@quantonium.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-27net: Convert simple pernet_operationsKirill Tkhai1-0/+1
These pernet_operations make pretty simple actions like variable initialization on init, debug checks on exit, and so on, and they obviously are able to be executed in parallel with any others: vrf_net_ops lockd_net_ops grace_net_ops xfrm6_tunnel_net_ops kcm_net_ops tcf_net_ops Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-27net: Convert /proc creating and destroying pernet_operationsKirill Tkhai1-0/+1
These pernet_operations just create and destroy /proc entries, and they can safely marked as async: pppoe_net_ops vlan_net_ops canbcm_pernet_ops kcm_net_ops pfkey_net_ops pppol2tp_net_ops phonet_net_ops Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-14kcm: Call strp_stop before strp_done in kcm_attachTom Herbert1-0/+1
In kcm_attach strp_done is called when sk_user_data is already set to fail the attach. strp_done needs the strp to be stopped and warns if it isn't. Call strp_stop in this case to eliminate the warning message. Reported-by: syzbot+88dfb55e4c8b770d86e3@syzkaller.appspotmail.com Fixes: e5571240236c5652f ("kcm: Check if sk_user_data already set in kcm_attach" Signed-off-by: Tom Herbert <tom@quantonium.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-11vfs: do bulk POLL* -> EPOLL* replacementLinus Torvalds1-3/+3
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-01-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-4/+21
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24kcm: Check if sk_user_data already set in kcm_attachTom Herbert1-2/+14
This is needed to prevent sk_user_data being overwritten. The check is done under the callback lock. This should prevent a socket from being attached twice to a KCM mux. It also prevents a socket from being attached for other use cases of sk_user_data as long as the other cases set sk_user_data under the lock. Followup work is needed to unify all the use cases of sk_user_data to use the same locking. Reported-by: syzbot+114b15f2be420a8886c3@syzkaller.appspotmail.com Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module") Signed-off-by: Tom Herbert <tom@quantonium.net> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24kcm: Only allow TCP sockets to be attached to a KCM muxTom Herbert1-2/+7
TCP sockets for IPv4 and IPv6 that are not listeners or in closed stated are allowed to be attached to a KCM mux. Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module") Reported-by: syzbot+8865eaff7f9acd593945@syzkaller.appspotmail.com Signed-off-by: Tom Herbert <tom@quantonium.net> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-16net: delete /proc THIS_MODULE referencesAlexey Dobriyan1-2/+0
/proc has been ignoring struct file_operations::owner field for 10 years. Specifically, it started with commit 786d7e1612f0b0adb6046f19b906609e4fe8b1ba ("Fix rmmod/read/write races in /proc entries"). Notice the chunk where inode->i_fop is initialized with proxy struct file_operations for regular files: - if (de->proc_fops) - inode->i_fop = de->proc_fops; + if (de->proc_fops) { + if (S_ISREG(inode->i_mode)) + inode->i_fop = &proc_reg_file_ops; + else + inode->i_fop = de->proc_fops; + } VFS stopped pinning module at this point. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-05make sock_alloc_file() do sock_release() on failuresAl Viro1-6/+1
This changes calling conventions (and simplifies the hell out the callers). New rules: once struct socket had been passed to sock_alloc_file(), it's been consumed either by struct file or by sock_release() done by sock_alloc_file(). Either way the caller should not do sock_release() after that point. Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-05fix kcm_clone()Al Viro1-44/+27
1) it's fput() or sock_release(), not both 2) don't do fd_install() until the last failure exit. 3) not a bug per se, but... don't attach socket to struct file until it's set up. Take reserving descriptor into the caller, move fd_install() to the caller, sanitize failure exits and calling conventions. Cc: stable@vger.kernel.org # v4.6+ Acked-by: Tom Herbert <tom@herbertland.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+1
Files removed in 'net-next' had their license header updated in 'net'. We take the remove from 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-26kcm: Remove redundant unlikely()Tobias Klauser1-1/+1
IS_ERR() already implies unlikely(), so it can be omitted. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+4
Three cases of simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-30kcm: do not attach PF_KCM sockets to avoid deadlockEric Dumazet1-0/+4
syzkaller had no problem to trigger a deadlock, attaching a KCM socket to another one (or itself). (original syzkaller report was a very confusing lockdep splat during a sendmsg()) It seems KCM claims to only support TCP, but no enforcement is done, so we might need to add additional checks. Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Acked-by: Tom Herbert <tom@quantonium.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-24strparser: initialize all callbacksEric Biggers1-6/+5
commit bbb03029a899 ("strparser: Generalize strparser") added more function pointers to 'struct strp_callbacks'; however, kcm_attach() was not updated to initialize them. This could cause the ->lock() and/or ->unlock() function pointers to be set to garbage values, causing a crash in strp_work(). Fix the bug by moving the callback structs into static memory, so unspecified members are zeroed. Also constify them while we're at it. This bug was found by syzkaller, which encountered the following splat: IP: 0x55 PGD 3b1ca067 P4D 3b1ca067 PUD 3b12f067 PMD 0 Oops: 0010 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 2 PID: 1194 Comm: kworker/u8:1 Not tainted 4.13.0-rc4-next-20170811 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: kstrp strp_work task: ffff88006bb0e480 task.stack: ffff88006bb10000 RIP: 0010:0x55 RSP: 0018:ffff88006bb17540 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: ffff88006ce4bd60 RCX: 0000000000000000 RDX: 1ffff1000d9c97bd RSI: 0000000000000000 RDI: ffff88006ce4bc48 RBP: ffff88006bb17558 R08: ffffffff81467ab2 R09: 0000000000000000 R10: ffff88006bb17438 R11: ffff88006bb17940 R12: ffff88006ce4bc48 R13: ffff88003c683018 R14: ffff88006bb17980 R15: ffff88003c683000 FS: 0000000000000000(0000) GS:ffff88006de00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000055 CR3: 000000003c145000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: process_one_work+0xbf3/0x1bc0 kernel/workqueue.c:2098 worker_thread+0x223/0x1860 kernel/workqueue.c:2233 kthread+0x35e/0x430 kernel/kthread.c:231 ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431 Code: Bad RIP value. RIP: 0x55 RSP: ffff88006bb17540 CR2: 0000000000000055 ---[ end trace f0e4920047069cee ]--- Here is a C reproducer (requires CONFIG_BPF_SYSCALL=y and CONFIG_AF_KCM=y): #include <linux/bpf.h> #include <linux/kcm.h> #include <linux/types.h> #include <stdint.h> #include <sys/ioctl.h> #include <sys/socket.h> #include <sys/syscall.h> #include <unistd.h> static const struct bpf_insn bpf_insns[3] = { { .code = 0xb7 }, /* BPF_MOV64_IMM(0, 0) */ { .code = 0x95 }, /* BPF_EXIT_INSN() */ }; static const union bpf_attr bpf_attr = { .prog_type = 1, .insn_cnt = 2, .insns = (uintptr_t)&bpf_insns, .license = (uintptr_t)"", }; int main(void) { int bpf_fd = syscall(__NR_bpf, BPF_PROG_LOAD, &bpf_attr, sizeof(bpf_attr)); int inet_fd = socket(AF_INET, SOCK_STREAM, 0); int kcm_fd = socket(AF_KCM, SOCK_DGRAM, 0); ioctl(kcm_fd, SIOCKCMATTACH, &(struct kcm_attach) { .fd = inet_fd, .bpf_fd = bpf_fd }); } Fixes: bbb03029a899 ("strparser: Generalize strparser") Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Tom Herbert <tom@quantonium.net> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-01strparser: Generalize strparserTom Herbert2-36/+36
Generalize strparser from more than just being used in conjunction with read_sock. strparser will also be used in the send path with zero proxy. The primary change is to create strp_process function that performs the critical processing on skbs. The documentation is also updated to reflect the new uses. Signed-off-by: Tom Herbert <tom@quantonium.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01net: convert sock.sk_wmem_alloc from atomic_t to refcount_tReshetova, Elena1-1/+1
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-16net: socket: mark socket protocol handler structs as constlinzhang1-1/+1
Signed-off-by: linzhang <xiaolou4617@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-17kcm: remove a useless copy_from_user()WANG Cong1-4/+0
struct kcm_clone only contains fd, and kcm_clone() only writes this struct, so there is no need to copy it from user. Cc: Tom Herbert <tom@herbertland.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-24kcm: return immediately after copy_from_user() failureWANG Cong1-3/+3
There is no reason to continue after a copy_from_user() failure. Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module") Cc: Tom Herbert <tom@herbertland.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-02sched/headers: Prepare to move signal wakeup & sigpending methods from ↵Ingo Molnar1-0/+2
<linux/sched.h> into <linux/sched/signal.h> Fix up affected files that include this signal functionality via sched.h. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-14kcm: fix a null pointer dereference in kcm_sendmsg()WANG Cong1-2/+4
In commit 98e3862ca2b1 ("kcm: fix 0-length case for kcm_sendmsg()") I tried to avoid skb allocation for 0-length case, but missed a check for NULL pointer in the non EOR case. Fixes: 98e3862ca2b1 ("kcm: fix 0-length case for kcm_sendmsg()") Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: Tom Herbert <tom@herbertland.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-09kcm: fix 0-length case for kcm_sendmsg()WANG Cong1-18/+22
Dmitry reported a kernel warning: WARNING: CPU: 3 PID: 2936 at net/kcm/kcmsock.c:627 kcm_write_msgs+0x12e3/0x1b90 net/kcm/kcmsock.c:627 CPU: 3 PID: 2936 Comm: a.out Not tainted 4.10.0-rc6+ #209 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:15 [inline] dump_stack+0x2ee/0x3ef lib/dump_stack.c:51 panic+0x1fb/0x412 kernel/panic.c:179 __warn+0x1c4/0x1e0 kernel/panic.c:539 warn_slowpath_null+0x2c/0x40 kernel/panic.c:582 kcm_write_msgs+0x12e3/0x1b90 net/kcm/kcmsock.c:627 kcm_sendmsg+0x163a/0x2200 net/kcm/kcmsock.c:1029 sock_sendmsg_nosec net/socket.c:635 [inline] sock_sendmsg+0xca/0x110 net/socket.c:645 sock_write_iter+0x326/0x600 net/socket.c:848 new_sync_write fs/read_write.c:499 [inline] __vfs_write+0x483/0x740 fs/read_write.c:512 vfs_write+0x187/0x530 fs/read_write.c:560 SYSC_write fs/read_write.c:607 [inline] SyS_write+0xfb/0x230 fs/read_write.c:599 entry_SYSCALL_64_fastpath+0x1f/0xc2 when calling syscall(__NR_write, sock2, 0x208aaf27ul, 0x0ul) on a KCM seqpacket socket. It appears that kcm_sendmsg() does not handle len==0 case correctly, which causes an empty skb is allocated and queued. Fix this by skipping the skb allocation for len==0 case. Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: Tom Herbert <tom@herbertland.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-07Merge branch 'work.splice_read' of ↵Linus Torvalds1-15/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull VFS splice updates from Al Viro: "There's a bunch of branches this cycle, both mine and from other folks and I'd rather send pull requests separately. This one is the conversion of ->splice_read() to ITER_PIPE iov_iter (and introduction of such). Gets rid of a lot of code in fs/splice.c and elsewhere; there will be followups, but these are for the next cycle... Some pipe/splice-related cleanups from Miklos in the same branch as well" * 'work.splice_read' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: pipe: fix comment in pipe_buf_operations pipe: add pipe_buf_steal() helper pipe: add pipe_buf_confirm() helper pipe: add pipe_buf_release() helper pipe: add pipe_buf_get() helper relay: simplify relay_file_read() switch default_file_splice_read() to use of pipe-backed iov_iter switch generic_file_splice_read() to use of ->read_iter() new iov_iter flavour: pipe-backed fuse_dev_splice_read(): switch to add_to_pipe() skb_splice_bits(): get rid of callback new helper: add_to_pipe() splice: lift pipe_lock out of splice_to_pipe() splice: switch get_iovec_page_array() to iov_iter splice_to_pipe(): don't open-code wakeup_pipe_readers() consistent treatment of EFAULT on O_DIRECT read/write
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-22 21:39:06 +0000