summaryrefslogtreecommitdiff
path: root/net/ipv6/fib6_rules.c
AgeCommit message (Collapse)AuthorFilesLines
2019-10-04net: fib_notifier: propagate extack down to the notifier block callbackJiri Pirko1-2/+3
Since errors are propagated all the way up to the caller, propagate possible extack of the caller all the way down to the notifier block callback. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-26ipv6: do not free rt if FIB_LOOKUP_NOREF is set on suppress ruleJason A. Donenfeld1-1/+2
Commit 7d9e5f422150 removed references from certain dsts, but accounting for this never translated down into the fib6 suppression code. This bug was triggered by WireGuard users who use wg-quick(8), which uses the "suppress-prefix" directive to ip-rule(8) for routing all of their internet traffic without routing loops. The test case added here causes the reference underflow by causing packets to evaluate a suppress rule. Fixes: 7d9e5f422150 ("ipv6: convert major tx path to use RT6_LOOKUP_F_DST_NOREF") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Acked-by: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-23ipv6: honor RT6_LOOKUP_F_DST_NOREF in rule lookup logicWei Wang1-5/+7
This patch specifically converts the rule lookup logic to honor this flag and not release refcnt when traversing each rule and calling lookup() on each routing table. Similar to previous patch, we also need some special handling of dst entries in uncached list because there is always 1 refcnt taken for them even if RT6_LOOKUP_F_DST_NOREF flag is set. Signed-off-by: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 372Thomas Gleixner1-4/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation version 2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 135 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531081036.435762997@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-23ipv6: Use result arg in fib_lookup_arg consistentlyDavid Ahern1-4/+11
arg.result is sometimes used as fib6_result and sometimes used to hold the rt6_info. Add rt6_info to fib6_result and make the use of arg.result consistent through ipv6 rules. The rt6 entry is filled in for lookups returning a dst_entry, but not for direct fib_lookups that just want a fib6_info. Fixes: effda4dd97e8 ("ipv6: Pass fib6_result to fib lookups") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-23ipv6: fib6_rule_action_alt needs to return -EAGAINDavid Ahern1-1/+3
fib rule actions should return -EAGAIN for the rules to continue to the next one. A recent change overwrote err with the lookup always returning 0 (future change will make it more like IPv4) which means the rules stopped at the first (e.g., local table lookup only). Catch and reset err to -EAGAIN. Fixes: effda4dd97e87 ("ipv6: Pass fib6_result to fib lookups") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-17ipv6: Pass fib6_result to fib lookupsDavid Ahern1-21/+13
Change fib6_lookup and fib6_table_lookup to take a fib6_result and set f6i and nh rather than returning a fib6_info. For now both always return 0. A later patch set can make these more like the IPv4 counterparts and return EINVAL, EACCESS, etc based on fib6_type. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11net/ipv6: Add fib6_lookupDavid Ahern1-2/+84
Add IPv6 equivalent to fib_lookup. Does a fib lookup, including rules, but returns a FIB entry, fib6_info, rather than a dst based rt6_info. fib6_lookup is any where from 140% (MULTIPLE_TABLES config disabled) to 60% faster than any of the dst based lookup methods (without custom rules) and 25% faster with custom rules (e.g., l3mdev rule). Since the lookup function has a completely different signature, fib6_rule_action is split into 2 paths: the existing one is renamed __fib6_rule_action and a new one for the fib6_info path is added. fib6_rule_action decides which to call based on the lookup_ptr. If it is fib6_table_lookup then the new path is taken. Caller must hold rcu lock as no reference is taken on the returned fib entry. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-05-11net/ipv6: Refactor fib6_rule_actionDavid Ahern1-21/+31
Move source address lookup from fib6_rule_action to a helper. It will be used in a later patch by a second variant for fib6_rule_action. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-04-23net: fib_rules: add extack supportRoopa Prabhu1-2/+5
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27net: Drop pernet_operations::asyncKirill Tkhai1-1/+0
Synchronous pernet_operations are not allowed anymore. All are asynchronous. So, drop the structure member. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-04net/ipv6: Pass skb to route lookupDavid Ahern1-3/+5
IPv6 does path selection for multipath routes deep in the lookup functions. The next patch adds L4 hash option and needs the skb for the forward path. To get the skb to the relevant FIB lookup functions it needs to go through the fib rules layer, so add a lookup_data argument to the fib_lookup_arg struct. Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-28ipv6: route: dissect flow in input path if fib rules need itRoopa Prabhu1-0/+16
Dissect flow in fwd path if fib rules require it. Controlled by a flag to avoid penatly for the common case. Flag is set when fib rules with sport, dport and proto match that require flow dissect are installed. Also passes the dissected hash keys to the multipath hash function when applicable to avoid dissecting the flow again. icmp packets will continue to use inner header for hash calculations. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-28ipv6: fib6_rules: support for match on sport, dport and ip protoRoopa Prabhu1-0/+11
support to match on src port, dst port and ip protocol. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-19net: Convert fib6_rules_net_opsKirill Tkhai1-0/+1
These pernet_operations register and unregister net::ipv6.fib6_rules_ops, which are used for routing. It looks like there are no pernet_operations, which send ipv6 packages to another net, so we are able to mark them as async. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-08net: ipv6: avoid overhead when no custom FIB rules are installedVincent Bernat1-13/+27
If the user hasn't installed any custom rules, don't go through the whole FIB rules layer. This is pretty similar to f4530fa574df (ipv4: Avoid overhead when no custom FIB rules are installed). Using a micro-benchmark module [1], timing ip6_route_output() with get_cycles(), with 40,000 routes in the main routing table, before this patch: min=606 max=12911 count=627 average=1959 95th=4903 90th=3747 50th=1602 mad=821 table=254 avgdepth=21.8 maxdepth=39 value │ ┊ count 600 │▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ 199 880 │▒▒▒░░░░░░░░░░░░░░░░ 43 1160 │▒▒▒░░░░░░░░░░░░░░░░░░░░ 48 1440 │▒▒▒░░░░░░░░░░░░░░░░░░░░░░░ 43 1720 │▒▒▒▒░░░░░░░░░░░░░░░░░░░░░░░░░░░ 59 2000 │▒▒▒░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ 50 2280 │▒▒░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ 26 2560 │▒▒░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ 31 2840 │▒▒░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ 28 3120 │▒░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ 17 3400 │▒░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ 17 3680 │░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ 8 3960 │░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ 11 4240 │░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ 6 4520 │░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ 6 4800 │░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ 9 After: min=544 max=11687 count=627 average=1776 95th=4546 90th=3585 50th=1227 mad=565 table=254 avgdepth=21.8 maxdepth=39 value │ ┊ count 540 │▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ 201 800 │▒▒▒▒▒░░░░░░░░░░░░░░░░ 63 1060 │▒▒▒▒▒░░░░░░░░░░░░░░░░░░░░░ 68 1320 │▒▒▒░░░░░░░░░░░░░░░░░░░░░░░░░░ 39 1580 │▒▒░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ 32 1840 │▒▒░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ 32 2100 │▒▒░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ 34 2360 │▒▒░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ 33 2620 │▒▒░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ 26 2880 │▒░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ 22 3140 │░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ 9 3400 │░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ 8 3660 │░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ 9 3920 │░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ 8 4180 │░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ 8 4440 │░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░ 8 At the frequency of the host during the bench (~ 3.7 GHz), this is about a 100 ns difference on the median value. A next step would be to collapse local and main tables, as in 0ddcf43d5d4a (ipv4: FIB Local/MAIN table collapse). [1]: https://github.com/vincentbernat/network-lab/blob/master/lab-routes-ipv6/kbench_mod.c Signed-off-by: Vincent Bernat <vincent@bernat.im> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-03ipv6: fib_rules: Dump rules during registration to FIB chainIdo Schimmel1-0/+11
Allow users of the FIB notification chain to receive a complete view of the IPv6 FIB rules upon registration to the chain. The integrity of the dump is ensured by a per-family sequence counter that is incremented (under RTNL) whenever a rule is added or deleted. All the sequence counters are read (under RTNL) and summed, prior and after the dump. In case the counters differ, then the dump is either restarted or the registration fails. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-03ipv6: fib_rules: Check if rule is a default ruleIdo Schimmel1-0/+20
As explained in commit 3c71006d15fd ("ipv4: fib_rules: Check if rule is a default rule"), drivers supporting IPv6 FIB offload need to be able to sanitize the rules they don't support and potentially flush their tables. Add an IPv6 helper to check if a FIB rule is a default rule. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-20ipv6: Do not leak throw route referencesSerhey Popovych1-16/+6
While commit 73ba57bfae4a ("ipv6: fix backtracking for throw routes") does good job on error propagation to the fib_rules_lookup() in fib rules core framework that also corrects throw routes handling, it does not solve route reference leakage problem happened when we return -EAGAIN to the fib_rules_lookup() and leave routing table entry referenced in arg->result. If rule with matched throw route isn't last matched in the list we overwrite arg->result losing reference on throw route stored previously forever. We also partially revert commit ab997ad40839 ("ipv6: fix the incorrect return value of throw route") since we never return routing table entry with dst.error == -EAGAIN when CONFIG_IPV6_MULTIPLE_TABLES is on. Also there is no point to check for RTF_REJECT flag since it is always set throw route. Fixes: 73ba57bfae4a ("ipv6: fix backtracking for throw routes") Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10net: flow: Add l3mdev flow updateDavid Ahern1-0/+3
Add l3mdev hook to set FLOWI_FLAG_SKIP_NH_OIF flag and update oif/iif in flow struct if its oif or iif points to a device enslaved to an L3 Master device. Only 1 needs to be converted to match the l3mdev FIB rule. This moves the flow adjustment for l3mdev to a single point catching all lookups. It is redundant for existing hooks (those are removed in later patches) but is needed for missed lookups such as PMTU updates. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-08net: Add l3mdev ruleDavid Ahern1-2/+4
Currently, VRFs require 1 oif and 1 iif rule per address family per VRF. As the number of VRF devices increases it brings scalability issues with the increasing rule list. All of the VRF rules have the same format with the exception of the specific table id to direct the lookup. Since the table id is available from the oif or iif in the loopup, the VRF rules can be consolidated to a single rule that pulls the table from the VRF device. This patch introduces a new rule attribute l3mdev. The l3mdev rule means the table id used for the lookup is pulled from the L3 master device (e.g., VRF) rather than being statically defined. With the l3mdev rule all of the basic VRF FIB rules are reduced to 1 l3mdev rule per address family (IPv4 and IPv6). If an admin wishes to insert higher priority rules for specific VRFs those rules will co-exist with the l3mdev rule. This capability means current VRF scripts will co-exist with this new simpler implementation. Currently, the rules list for both ipv4 and ipv6 look like this: $ ip ru ls 1000: from all oif vrf1 lookup 1001 1000: from all iif vrf1 lookup 1001 1000: from all oif vrf2 lookup 1002 1000: from all iif vrf2 lookup 1002 1000: from all oif vrf3 lookup 1003 1000: from all iif vrf3 lookup 1003 1000: from all oif vrf4 lookup 1004 1000: from all iif vrf4 lookup 1004 1000: from all oif vrf5 lookup 1005 1000: from all iif vrf5 lookup 1005 1000: from all oif vrf6 lookup 1006 1000: from all iif vrf6 lookup 1006 1000: from all oif vrf7 lookup 1007 1000: from all iif vrf7 lookup 1007 1000: from all oif vrf8 lookup 1008 1000: from all iif vrf8 lookup 1008 ... 32765: from all lookup local 32766: from all lookup main 32767: from all lookup default With the l3mdev rule the list is just the following regardless of the number of VRFs: $ ip ru ls 1000: from all lookup [l3mdev table] 32765: from all lookup local 32766: from all lookup main 32767: from all lookup default (Note: the above pretty print of the rule is based on an iproute2 prototype. Actual verbage may change) Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-23ipv6: fix the incorrect return value of throw routelucien1-4/+15
The error condition -EAGAIN, which is signaled by throw routes, tells the rules framework to walk on searching for next matches. If the walk ends and we stop walking the rules with the result of a throw route we have to translate the error conditions to -ENETUNREACH. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-09net: ipv6: use common fib_default_rule_prefPhil Sutter1-6/+0
This switches IPv6 policy routing to use the shared fib_default_rule_pref() function of IPv4 and DECnet. It is also used in multicast routing for IPv4 as well as IPv6. The motivation for this patch is a complaint about iproute2 behaving inconsistent between IPv4 and IPv6 when adding policy rules: Formerly, IPv6 rules were assigned a fixed priority of 0x3FFF whereas for IPv4 the assigned priority value was decreased with each rule added. Since then all users of the default_pref field have been converted to assign the generic function fib_default_rule_pref(), fib_nl_newrule() may just use it directly instead. Therefore get rid of the function pointer altogether and make fib_default_rule_pref() static, as it's not used outside fib_rules.c anymore. Signed-off-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+2
Conflicts: drivers/net/ethernet/mellanox/mlx4/cmd.c net/core/fib_rules.c net/ipv4/fib_frontend.c The fib_rules.c and fib_frontend.c conflicts were locking adjustments in 'net' overlapping addition and removal of code in 'net-next'. The mlx4 conflict was a bug fix in 'net' happening in the same place a constant was being replaced with a more suitable macro. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02net: move fib_rules_unregister() under rtnl lockWANG Cong1-0/+2
We have to hold rtnl lock for fib_rules_unregister() otherwise the following race could happen: fib_rules_unregister(): fib_nl_delrule(): ... ... ... ops = lookup_rules_ops(); list_del_rcu(&ops->list); list_for_each_entry(ops->rules) { fib_rules_cleanup_ops(ops); ... list_del_rcu(); list_del_rcu(); } Note, net->rules_mod_lock is actually not needed at all, either upper layer netns code or rtnl lock guarantees we are safe. Cc: Alexander Duyck <alexander.h.duyck@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31netlink: implement nla_get_in_addr and nla_get_in6_addrJiri Benc1-4/+2
Those are counterparts to nla_put_in_addr and nla_put_in6_addr. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31netlink: implement nla_put_in_addr and nla_put_in6_addrJiri Benc1-4/+2
IP addresses are often stored in netlink attributes. Add generic functions to do that. For nla_put_in_addr, it would be nicer to pass struct in_addr but this is not used universally throughout the kernel, in way too many places __be32 is used to store IPv4 address. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29fib6: install fib6 ops in the last stepWANG Cong1-6/+3
We should not commit the new ops until we finish all the setup, otherwise we have to NULL it on failure. Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-20ipv6: fix backtracking for throw routesSteven Barth1-0/+1
for throw routes to trigger evaluation of other policy rules EAGAIN needs to be propagated up to fib_rules_lookup similar to how its done for IPv4 A simple testcase for verification is: ip -6 rule add lookup 33333 priority 33333 ip -6 route add throw 2001:db8::1 ip -6 route add 2001:db8::1 via fe80::1 dev wlan0 table 33333 ip route get 2001:db8::1 Signed-off-by: Steven Barth <cyrus@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-15ipv6: move IPV6_TCLASS_SHIFT into ipv6.h and define a helperLi RongQing1-1/+1
Two places defined IPV6_TCLASS_SHIFT, so we should move it into ipv6.h, and use this macro as possible. And define ip6_tclass helper to return tclass Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-10inet: fix NULL pointer Oops in fib(6)_rule_suppressStefan Tomanek1-1/+5
This changes ensures that the routing entry investigated by the suppress function actually does point to a device struct before following that pointer, fixing a possible kernel oops situation when verifying the interface group associated with a routing table entry. According to Daniel Golle, this Oops can be triggered by a user process trying to establish an outgoing IPv6 connection while having no real IPv6 connectivity set up (only autoassigned link-local addresses). Fixes: 6ef94cfafba15 ("fib_rules: add route suppression based on ifgroup") Reported-by: Daniel Golle <daniel.golle@gmail.com> Tested-by: Daniel Golle <daniel.golle@gmail.com> Signed-off-by: Stefan Tomanek <stefan.tomanek@wertarbyte.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-11fib6_rules: fix indentationStefan Tomanek1-2/+2
This change just removes two tabs from the source file. Signed-off-by: Stefan Tomanek <stefan.tomanek@wertarbyte.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03fib_rules: fix suppressor names and default valuesStefan Tomanek1-1/+1
This change brings the suppressor attribute names into line; it also changes the data types to provide a more consistent interface. While -1 indicates that the suppressor is not enabled, values >= 0 for suppress_prefixlen or suppress_ifgroup reject routing decisions violating the constraint. This changes the previously presented behaviour of suppress_prefixlen, where a prefix length _less_ than the attribute value was rejected. After this change, a prefix length less than *or* equal to the value is considered a violation of the rule constraint. It also changes the default values for default and newly added rules (disabling any suppression for those). Signed-off-by: Stefan Tomanek <stefan.tomanek@wertarbyte.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-02fib_rules: add route suppression based on ifgroupStefan Tomanek1-3/+13
This change adds the ability to suppress a routing decision based upon the interface group the selected interface belongs to. This allows it to exclude specific devices from a routing decision. Signed-off-by: Stefan Tomanek <stefan.tomanek@wertarbyte.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01ipv6: fib6_rules should return exact return valueHannes Frederic Sowa1-3/+11
With the addition of the suppress operation (7764a45a8f1fe74d4f7d301eaca2e558e7e2831a ("fib_rules: add .suppress operation") we rely on accurate error reporting of the fib_rules.actions. fib6_rule_action always returned -EAGAIN in case we could not find a matching route and 0 if a rule was matched. This also included a match for blackhole or prohibited rule actions which could get suppressed by the new logic. So adapt fib6_rule_action to always return the correct error code as its counterpart fib4_rule_action does. This also fixes a possiblity of nullptr-deref where we don't find a table, thus rt == NULL. Because the condition rt != ip6_null_entry still holdes it seems we could later get a nullptr bug on dereference rt->dst. v2: a) Fixed a brain fart in the commit msg (the rule => a table, etc). No changes to the patch. Cc: Stefan Tomanek <stefan.tomanek@wertarbyte.de> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-31fib_rules: add .suppress operationStefan Tomanek1-0/+13
This change adds a new operation to the fib_rules_ops struct; it allows the suppression of routing decisions if certain criteria are not met by its results. The first implemented constraint is a minimum prefix length added to the structures of routing rules. If a rule is added with a minimum prefix length >0, only routes meeting this threshold will be considered. Any other (more general) routing table entries will be ignored. When configuring a system with multiple network uplinks and default routes, it is often convinient to reference the main routing table multiple times - but omitting the default route. Using this patch and a modified "ip" utility, this can be achieved by using the following command sequence: $ ip route add table secuplink default via 10.42.23.1 $ ip rule add pref 100 table main prefixlength 1 $ ip rule add pref 150 fwmark 0xA table secuplink With this setup, packets marked 0xA will be processed by the additional routing table "secuplink", but only if no suitable route in the main routing table can be found. By using a minimal prefixlength of 1, the default route (/0) of the table "main" is hidden to packets processed by rule 100; packets traveling to destinations with more specific routing entries are processed as usual. Signed-off-by: Stefan Tomanek <stefan.tomanek@wertarbyte.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-03ipv6: introduce ip6_rt_put()Amerigo Wang1-1/+1
As suggested by Eric, we could introduce a helper function for ipv6 too, to avoid checking if rt is NULL before dst_release(). Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-06sections: fix section conflicts in netAndi Kleen1-1/+1
Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-02net/ipv6/fib6_rules.c: Checkpatch cleanupEldad Zack1-2/+1
fib6_rules.c:26: ERROR: open brace '{' following struct go on the same line Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-02ipv6: Stop using NLA_PUT*().David S. Miller1-8/+7
These macros contain a hidden goto, and are thus extremely error prone and make code hard to audit. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-22net: remove ipv6_addr_copy()Alexey Dobriyan1-1/+1
C assignment can handle struct in6_addr copying. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-31net: Add export.h for EXPORT_SYMBOL/THIS_MODULE to non-modulesPaul Gortmaker1-0/+1
These files are non modular, but need to export symbols using the macros now living in export.h -- call out the include so that things won't break when we remove the implicit presence of module.h from everywhere. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-12ipv6: Convert to use flowi6 where applicable.David S. Miller1-8/+11
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-16fib6: use FIB_LOOKUP_NOREF in fib6_rule_lookup()Eric Dumazet1-2/+1
Avoid two atomic ops on found rule in fib6_rule_lookup() Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-10net-next: remove useless union keywordChangli Gao1-5/+5
remove useless union keyword in rtable, rt6_info and dn_route. Since there is only one member in a union, the union keyword isn't useful. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-26net: rtnetlink: decouple rtnetlink address families from real address familiesPatrick McHardy1-1/+1
Decouple rtnetlink address families from real address families in socket.h to be able to add rtnetlink interfaces to code that is not a real address family without increasing AF_MAX/NPROTO. This will be used to add support for multicast route dumping from all tables as the proc interface can't be extended to support anything but the main table without breaking compatibility. This partialy undoes the patch to introduce independant families for routing rules and converts ipmr routing rules to a new rtnetlink family. Similar to that patch, values up to 127 are reserved for real address families, values above that may be used arbitrarily. Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-04-26net: fib_rules: mark arguments to fib_rules_register const and __net_initdataPatrick McHardy1-1/+1
fib_rules_register() duplicates the template passed to it without modification, mark the argument as const. Additionally the templates are only needed when instantiating a new namespace, so mark them as __net_initdata, which means they can be discarded when CONFIG_NET_NS=n. Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-04-13net: fib_rules: decouple address families from real address familiesPatrick McHardy1-1/+1
Decouple the address family values used for fib_rules from the real address families in socket.h. This allows to use fib_rules for code that is not a real address family without increasing AF_MAX/NPROTO. Values up to 127 are reserved for real address families and map directly to the corresponding AF value, values starting from 128 are for other uses. rtnetlink is changed to invoke the AF_UNSPEC dumpit/doit handlers for these families. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-13net: fib_rules: set family in fib_rule_hdr centrallyPatrick McHardy1-1/+0
All fib_rules implementations need to set the family in their ->fill() functions. Since the value is available to the generic fib_nl_fill_rule() function, set it there. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-07ipv6: Optmize translation between IPV6_PREFER_SRC_xxx and RT6_LOOKUP_F_xxx.YOSHIFUJI Hideaki / 吉藤英明1-9/+2
IPV6_PREFER_SRC_xxx definitions: | #define IPV6_PREFER_SRC_TMP 0x0001 | #define IPV6_PREFER_SRC_PUBLIC 0x0002 | #define IPV6_PREFER_SRC_COA 0x0004 RT6_LOOKUP_F_xxx definitions: | #define RT6_LOOKUP_F_SRCPREF_TMP 0x00000008 | #define RT6_LOOKUP_F_SRCPREF_PUBLIC 0x00000010 | #define RT6_LOOKUP_F_SRCPREF_COA 0x00000020 So, we can translate between these two groups by shift operation instead of multiple 'if's. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-02 00:22:11 +0000