summaryrefslogtreecommitdiff
path: root/net/devlink
AgeCommit message (Collapse)AuthorFilesLines
2024-06-05devlink: Constify the 'table_ops' parameter of devl_dpipe_table_register()Christophe JAILLET1-1/+1
"struct devlink_dpipe_table_ops" only contains some function pointers. Update "struct devlink_dpipe_table" and the 'table_ops' parameter of devl_dpipe_table_register() so that structures in drivers can be constified. Constifying these structures will move some data to a read-only section, so increase overall security. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-22devlink: extend devlink_param *set pointerMateusz Polchlopek1-3/+4
Extend devlink_param *set function pointer to take extack as a param. Sometimes it is needed to pass information to the end user from set function. It is more proper to use for that netlink instead of passing message to dmesg. Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-04-08devlink: Support setting max_io_eqsParav Pandit1-0/+53
Many devices send event notifications for the IO queues, such as tx and rx queues, through event queues. Enable a privileged owner, such as a hypervisor PF, to set the number of IO event queues for the VF and SF during the provisioning stage. example: Get maximum IO event queues of the VF device:: $ devlink port show pci/0000:06:00.0/2 pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0 vfnum 1 function: hw_addr 00:00:00:00:00:00 ipsec_packet disabled max_io_eqs 10 Set maximum IO event queues of the VF device:: $ devlink port function set pci/0000:06:00.0/2 max_io_eqs 32 $ devlink port show pci/0000:06:00.0/2 pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0 vfnum 1 function: hw_addr 00:00:00:00:00:00 ipsec_packet disabled max_io_eqs 32 Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Parav Pandit <parav@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-06netlink: add nlmsg_consume() and use it in devlink compatJakub Kicinski1-1/+1
devlink_compat_running_version() sticks out when running netdevsim tests and watching dropped skbs. Add nlmsg_consume() for cases were we want to free a netlink skb but it is expected, rather than a drop. af_netlink code uses consume_skb() directly, which is fine, but some may prefer the symmetry of nlmsg_new() / nlmsg_consume(). Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-29netlink: introduce type-checking attribute iterationJohannes Berg1-8/+4
There are, especially with multi-attr arrays, many cases of needing to iterate all attributes of a specific type in a netlink message or a nested attribute. Add specific macros to support that case. Also convert many instances using this spatch: @@ iterator nla_for_each_attr; iterator name nla_for_each_attr_type; identifier nla; expression head, len, rem; expression ATTR; type T; identifier x; @@ -nla_for_each_attr(nla, head, len, rem) +nla_for_each_attr_type(nla, ATTR, head, len, rem) { <... T x; ...> -if (nla_type(nla) == ATTR) { ... -} } @@ identifier nla; iterator nla_for_each_nested; iterator name nla_for_each_nested_type; expression attr, rem; expression ATTR; type T; identifier x; @@ -nla_for_each_nested(nla, attr, rem) +nla_for_each_nested_type(nla, ATTR, attr, rem) { <... T x; ...> -if (nla_type(nla) == ATTR) { ... -} } @@ iterator nla_for_each_attr; iterator name nla_for_each_attr_type; identifier nla; expression head, len, rem; expression ATTR; type T; identifier x; @@ -nla_for_each_attr(nla, head, len, rem) +nla_for_each_attr_type(nla, ATTR, head, len, rem) { <... T x; ...> -if (nla_type(nla) != ATTR) continue; ... } @@ identifier nla; iterator nla_for_each_nested; iterator name nla_for_each_nested_type; expression attr, rem; expression ATTR; type T; identifier x; @@ -nla_for_each_nested(nla, attr, rem) +nla_for_each_nested_type(nla, ATTR, attr, rem) { <... T x; ...> -if (nla_type(nla) != ATTR) continue; ... } Although I had to undo one bad change this made, and I also adjusted some other code for whitespace and to use direct variable initialization now. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20240328203144.b5a6c895fb80.I1869b44767379f204998ff44dd239803f39c23e0@changeid Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-29devlink: use kvzalloc() to allocate devlink instance resourcesJian Wen1-3/+3
During live migration of a virtual machine, the SR-IOV VF need to be re-registered. It may fail when the memory is badly fragmented. The related log is as follows. kernel: hv_netvsc 6045bdaa-c0d1-6045-bdaa-c0d16045bdaa eth0: VF slot 1 added ... kernel: kworker/0:0: page allocation failure: order:7, mode:0x40dc0(GFP_KERNEL|__GFP_COMP|__GFP_ZERO), nodemask=(null),cpuset=/,mems_allowed=0 kernel: CPU: 0 PID: 24006 Comm: kworker/0:0 Tainted: G E 5.4...x86_64 #1 kernel: Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS 090008 12/07/2018 kernel: Workqueue: events work_for_cpu_fn kernel: Call Trace: kernel: dump_stack+0x8b/0xc8 kernel: warn_alloc+0xff/0x170 kernel: __alloc_pages_slowpath+0x92c/0xb2b kernel: ? get_page_from_freelist+0x1d4/0x1140 kernel: __alloc_pages_nodemask+0x2f9/0x320 kernel: alloc_pages_current+0x6a/0xb0 kernel: kmalloc_order+0x1e/0x70 kernel: kmalloc_order_trace+0x26/0xb0 kernel: ? __switch_to_asm+0x34/0x70 kernel: __kmalloc+0x276/0x280 kernel: ? _raw_spin_unlock_irqrestore+0x1e/0x40 kernel: devlink_alloc+0x29/0x110 kernel: mlx5_devlink_alloc+0x1a/0x20 [mlx5_core] kernel: init_one+0x1d/0x650 [mlx5_core] kernel: local_pci_probe+0x46/0x90 kernel: work_for_cpu_fn+0x1a/0x30 kernel: process_one_work+0x16d/0x390 kernel: worker_thread+0x1d3/0x3f0 kernel: kthread+0x105/0x140 kernel: ? max_active_store+0x80/0x80 kernel: ? kthread_bind+0x20/0x20 kernel: ret_from_fork+0x3a/0x50 Signed-off-by: Jian Wen <wenjian1@xiaomi.com> Link: https://lore.kernel.org/r/20240327082128.942818-1-wenjian1@xiaomi.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-19devlink: fix port new reply cmd typeJiri Pirko1-1/+1
Due to a c&p error, port new reply fills-up cmd with wrong value, any other existing port command replies and notifications. Fix it by filling cmd with value DEVLINK_CMD_PORT_NEW. Skimmed through devlink userspace implementations, none of them cares about this cmd value. Reported-by: Chenyuan Yang <chenyuan0y@gmail.com> Closes: https://lore.kernel.org/all/ZfZcDxGV3tSy4qsV@cy-server/ Fixes: cd76dcd68d96 ("devlink: Support add and delete devlink port") Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Link: https://lore.kernel.org/r/20240318091908.2736542-1-jiri@resnulli.us Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-13devlink: Fix devlink parallel commands processingShay Drory1-6/+7
Commit 870c7ad4a52b ("devlink: protect devlink->dev by the instance lock") added devlink instance locking inside a loop that iterates over all the registered devlink instances on the machine in the pre-doit phase. This can lead to serialization of devlink commands over different devlink instances. For example: While the first devlink instance is executing firmware flash, all commands to other devlink instances on the machine are forced to wait until the first devlink finishes. Therefore, in the pre-doit phase, take the devlink instance lock only for the devlink instance the command is targeting. Devlink layer is taking a reference on the devlink instance, ensuring the devlink->dev pointer is valid. This reference taking was introduced by commit a380687200e0 ("devlink: take device reference for devlink object"). Without this commit, it would not be safe to access devlink->dev lockless. Fixes: 870c7ad4a52b ("devlink: protect devlink->dev by the instance lock") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-11devlink: Fix length of eswitch inline-modeWilliam Tu1-1/+1
Set eswitch inline-mode to be u8, not u16. Otherwise, errors below $ devlink dev eswitch set pci/0000:08:00.0 mode switchdev \ inline-mode network Error: Attribute failed policy validation. kernel answers: Numerical result out of rang netlink: 'devlink': attribute type 26 has an invalid length. Fixes: f2f9dd164db0 ("netlink: specs: devlink: add the remaining command to generate complete split_ops") Signed-off-by: William Tu <witu@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240310164547.35219-1-witu@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-21devlink: fix port dump cmd typeJiri Pirko1-1/+1
Unlike other commands, due to a c&p error, port dump fills-up cmd with wrong value, different from port-get request cmd, port-get doit reply and port notification. Fix it by filling cmd with value DEVLINK_CMD_PORT_NEW. Skimmed through devlink userspace implementations, none of them cares about this cmd value. Only ynl, for which, this is actually a fix, as it expects doit and dumpit ops rsp_value to be the same. Omit the fixes tag, even thought this is fix, better to target this for next release. Fixes: bfcd3a466172 ("Introduce devlink infrastructure") Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20240220075245.75416-1-jiri@resnulli.us Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-20devlink: fix possible use-after-free and memory leaks in devlink_init()Vasiliy Kovalev1-3/+9
The pernet operations structure for the subsystem must be registered before registering the generic netlink family. Make an unregister in case of unsuccessful registration. Fixes: 687125b5799c ("devlink: split out core code") Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org> Link: https://lore.kernel.org/r/20240215203400.29976-1-kovalev@altlinux.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-06devlink: avoid potential loop in devlink_rel_nested_in_notify_work()Jiri Pirko1-6/+6
In case devlink_rel_nested_in_notify_work() can not take the devlink lock mutex. Convert the work to delayed work and in case of reschedule do it jiffie later and avoid potential looping. Suggested-by: Paolo Abeni <pabeni@redhat.com> Fixes: c137743bce02 ("devlink: introduce object and nested devlink relationship infra") Signed-off-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20240205171114.338679-1-jiri@resnulli.us Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-30devlink: Fix referring to hw_addr attribute during state validationParav Pandit1-1/+1
When port function state change is requested, and when the driver does not support it, it refers to the hw address attribute instead of state attribute. Seems like a copy paste error. Fix it by referring to the port function state attribute. Fixes: c0bea69d1ca7 ("devlink: Validate port function request") Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20240129191059.129030-1-parav@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-19devlink: extend multicast filtering by port indexJiri Pirko5-5/+30
Expose the previously introduced notification multicast messages filtering infrastructure and allow the user to select messages using port index. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-12-19devlink: add a command to set notification filter and use it for multicastsJiri Pirko4-4/+157
Currently the user listening on a socket for devlink notifications gets always all messages for all existing instances, even if he is interested only in one of those. That may cause unnecessary overhead on setups with thousands of instances present. User is currently able to narrow down the devlink objects replies to dump commands by specifying select attributes. Allow similar approach for notifications. Introduce a new devlink NOTIFY_FILTER_SET which the user passes the select attributes. Store these per-socket and use them for filtering messages during multicast send. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-12-19devlink: introduce a helper for netlink multicast sendJiri Pirko9-22/+18
Introduce a helper devlink_nl_notify_send() so each object notification function does not have to call genlmsg_multicast_netns() with the same arguments. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-12-19devlink: send notifications only if there are listenersJiri Pirko9-9/+21
Introduce devlink_nl_notify_need() helper and using it to check at the beginning of notification functions to avoid overhead of composing notification messages in case nobody listens. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-12-19devlink: introduce __devl_is_registered() helper and use it instead of ↵Jiri Pirko4-4/+10
xa_get_mark() Introduce __devl_is_registered() which does not assert on devlink instance lock and use it in notifications which may be called without devlink instance lock held. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-12-19devlink: use devl_is_registered() helper instead xa_get_mark()Jiri Pirko3-6/+9
Instead of checking the xarray mark directly using xa_get_mark() helper use devl_is_registered() helper which wraps it up. Note that there are couple more users of xa_get_mark() left which are going to be handled by the next patch. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-30devlink: warn about existing entities during reload-reinitJiri Pirko1-1/+15
During reload-reinit, all entities except for params, resources, regions and health reporter should be removed and re-added. Add a warning to be triggered in case the driver behaves differently. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-18devlink: Add device lock assert in reload operationIdo Schimmel1-0/+8
Add an assert to verify that the device lock is always held throughout reload operations. Tested the following flows with netdevsim and mlxsw while lockdep is enabled: netdevsim: # echo "10 1" > /sys/bus/netdevsim/new_device # devlink dev reload netdevsim/netdevsim10 # ip netns add bla # devlink dev reload netdevsim/netdevsim10 netns bla # ip netns del bla # echo 10 > /sys/bus/netdevsim/del_device mlxsw: # devlink dev reload pci/0000:01:00.0 # ip netns add bla # devlink dev reload pci/0000:01:00.0 netns bla # ip netns del bla # echo 1 > /sys/bus/pci/devices/0000\:01\:00.0/remove # echo 1 > /sys/bus/pci/rescan Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-18devlink: Acquire device lock during reload commandIdo Schimmel3-2/+20
Device drivers register with devlink from their probe routines (under the device lock) by acquiring the devlink instance lock and calling devl_register(). Drivers that support a devlink reload usually implement the reload_{down, up}() operations in a similar fashion to their remove and probe routines, respectively. However, while the remove and probe routines are invoked with the device lock held, the reload operations are only invoked with the devlink instance lock held. It is therefore impossible for drivers to acquire the device lock from their reload operations, as this would result in lock inversion. The motivating use case for invoking the reload operations with the device lock held is in mlxsw which needs to trigger a PCI reset as part of the reload. The driver cannot call pci_reset_function() as this function acquires the device lock. Instead, it needs to call __pci_reset_function_locked which expects the device lock to be held. To that end, adjust devlink to always acquire the device lock before the devlink instance lock when performing a reload. Do that when reload is explicitly triggered by user space by specifying the 'DEVLINK_NL_FLAG_NEED_DEV_LOCK' flag in the pre_doit and post_doit operations of the reload command. A previous patch already handled the case where reload is invoked as part of netns dismantle. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-18devlink: Allow taking device lock in pre_doit operationsIdo Schimmel4-10/+18
Introduce a new private flag ('DEVLINK_NL_FLAG_NEED_DEV_LOCK') to allow netlink commands to specify that they need to acquire the device lock in their pre_doit operation and release it in their post_doit operation. The reload command will use this flag in the subsequent patch. No functional changes intended. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-18devlink: Enable the use of private flags in post_doit operationsIdo Schimmel1-2/+8
Currently, private flags (e.g., 'DEVLINK_NL_FLAG_NEED_PORT') are only used in pre_doit operations, but a subsequent patch will need to conditionally lock and unlock the device lock in pre and post doit operations, respectively. As a preparation, enable the use of private flags in post_doit operations in a similar fashion to how it is done for pre_doit operations. No functional changes intended. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-18devlink: Acquire device lock during netns dismantleIdo Schimmel2-2/+17
Device drivers register with devlink from their probe routines (under the device lock) by acquiring the devlink instance lock and calling devl_register(). Drivers that support a devlink reload usually implement the reload_{down, up}() operations in a similar fashion to their remove and probe routines, respectively. However, while the remove and probe routines are invoked with the device lock held, the reload operations are only invoked with the devlink instance lock held. It is therefore impossible for drivers to acquire the device lock from their reload operations, as this would result in lock inversion. The motivating use case for invoking the reload operations with the device lock held is in mlxsw which needs to trigger a PCI reset as part of the reload. The driver cannot call pci_reset_function() as this function acquires the device lock. Instead, it needs to call __pci_reset_function_locked which expects the device lock to be held. To that end, adjust devlink to always acquire the device lock before the devlink instance lock when performing a reload. For now, only do that when reload is triggered as part of netns dismantle. Subsequent patches will handle the case where reload is explicitly triggered by user space. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-18devlink: Move private netlink flags to C fileIdo Schimmel2-3/+3
The flags are not used outside of the C file so move them there. Suggested-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-01netlink: specs: devlink: add forgotten port function caps enum valuesJiri Pirko1-1/+1
Add two enum values that the blamed commit omitted. Fixes: f2f9dd164db0 ("netlink: specs: devlink: add the remaining command to generate complete split_ops") Signed-off-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20231030161750.110420-1-jiri@resnulli.us Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23devlink: remove netlink small_opsJiri Pirko1-327/+1
All commands are now covered by generated split_ops. Remove the small_ops entirely alongside with unified devlink netlink policy array. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20231021112711.660606-11-jiri@resnulli.us Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23devlink: remove duplicated netlink callback prototypesJiri Pirko1-62/+0
The prototypes are now generated, remove the old ones. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20231021112711.660606-10-jiri@resnulli.us Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23netlink: specs: devlink: add the remaining command to generate complete ↵Jiri Pirko2-2/+819
split_ops Currently, some of the commands are not described in devlink yaml file and are manually filled in net/devlink/netlink.c in small_ops. To make all part of split_ops, add definitions of the rest of the commands alongside with needed attributes and enums. Note that this focuses on the kernel side. The requests are fully described in order to generate split_op alongside with policies. Follow-up will describe the replies in order to make the userspace helpers complete. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20231021112711.660606-9-jiri@resnulli.us Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-23devlink: rename netlink callback to be aligned with the generated onesJiri Pirko13-158/+152
All remaining doit and dumpit netlink callback functions are going to be used by generated split ops. They expect certain name format. Rename the callback to be aligned with generated names. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20231021112711.660606-8-jiri@resnulli.us Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-20devlink: convert most of devlink_fmsg_*() to return voidPrzemek Kitszel1-104/+84
Since struct devlink_fmsg retains error by now (see 1st patch of this series), there is no longer need to keep returning it in each call. This is a separate commit to allow per-driver conversion to stop using those return values. Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-20devlink: retain error in struct devlink_fmsgPrzemek Kitszel1-171/+76
Retain error value in struct devlink_fmsg, to relieve drivers from checking it after each call. Note that fmsg is an in-memory builder/buffer of formatted message, so it's not the case that half baked message was sent somewhere. We could find following scheme in multiple drivers: err = devlink_fmsg_obj_nest_start(fmsg); if (err) return err; err = devlink_fmsg_string_pair_put(fmsg, "src", src); if (err) return err; err = devlink_fmsg_something(fmsg, foo, bar); if (err) return err; // and so on... err = devlink_fmsg_obj_nest_end(fmsg); With retaining error API that translates to: devlink_fmsg_obj_nest_start(fmsg); devlink_fmsg_string_pair_put(fmsg, "src", src); devlink_fmsg_something(fmsg, foo, bar); // and so on... devlink_fmsg_obj_nest_end(fmsg); What means we check error just when is time to send. Possible error scenarios are developer error (API misuse) and memory exhaustion, both cases are good candidates to choose readability over fastest possible exit. Note that this patch keeps returning errors, to allow per-driver conversion to the new API, but those are not needed at this point already. This commit itself is an illustration of benefits for the dev-user, more of it will be in separate commits of the series. Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-18devlink: document devlink_rel_nested_in_notify() functionJiri Pirko1-0/+14
Add a documentation for devlink_rel_nested_in_notify() describing the devlink instance locking consequences. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-18devlink: don't take instance lock for nested handle putJiri Pirko1-14/+3
Lockdep reports following issue: WARNING: possible circular locking dependency detected ------------------------------------------------------ devlink/8191 is trying to acquire lock: ffff88813f32c250 (&devlink->lock_key#14){+.+.}-{3:3}, at: devlink_rel_devlink_handle_put+0x11e/0x2d0 but task is already holding lock: ffffffff8511eca8 (rtnl_mutex){+.+.}-{3:3}, at: unregister_netdev+0xe/0x20 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (rtnl_mutex){+.+.}-{3:3}: lock_acquire+0x1c3/0x500 __mutex_lock+0x14c/0x1b20 register_netdevice_notifier_net+0x13/0x30 mlx5_lag_add_mdev+0x51c/0xa00 [mlx5_core] mlx5_load+0x222/0xc70 [mlx5_core] mlx5_init_one_devl_locked+0x4a0/0x1310 [mlx5_core] mlx5_init_one+0x3b/0x60 [mlx5_core] probe_one+0x786/0xd00 [mlx5_core] local_pci_probe+0xd7/0x180 pci_device_probe+0x231/0x720 really_probe+0x1e4/0xb60 __driver_probe_device+0x261/0x470 driver_probe_device+0x49/0x130 __driver_attach+0x215/0x4c0 bus_for_each_dev+0xf0/0x170 bus_add_driver+0x21d/0x590 driver_register+0x133/0x460 vdpa_match_remove+0x89/0xc0 [vdpa] do_one_initcall+0xc4/0x360 do_init_module+0x22d/0x760 load_module+0x51d7/0x6750 init_module_from_file+0xd2/0x130 idempotent_init_module+0x326/0x5a0 __x64_sys_finit_module+0xc1/0x130 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 -> #2 (mlx5_intf_mutex){+.+.}-{3:3}: lock_acquire+0x1c3/0x500 __mutex_lock+0x14c/0x1b20 mlx5_register_device+0x3e/0xd0 [mlx5_core] mlx5_init_one_devl_locked+0x8fa/0x1310 [mlx5_core] mlx5_devlink_reload_up+0x147/0x170 [mlx5_core] devlink_reload+0x203/0x380 devlink_nl_cmd_reload+0xb84/0x10e0 genl_family_rcv_msg_doit+0x1cc/0x2a0 genl_rcv_msg+0x3c9/0x670 netlink_rcv_skb+0x12c/0x360 genl_rcv+0x24/0x40 netlink_unicast+0x435/0x6f0 netlink_sendmsg+0x7a0/0xc70 sock_sendmsg+0xc5/0x190 __sys_sendto+0x1c8/0x290 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 -> #1 (&dev->lock_key#8){+.+.}-{3:3}: lock_acquire+0x1c3/0x500 __mutex_lock+0x14c/0x1b20 mlx5_init_one_devl_locked+0x45/0x1310 [mlx5_core] mlx5_devlink_reload_up+0x147/0x170 [mlx5_core] devlink_reload+0x203/0x380 devlink_nl_cmd_reload+0xb84/0x10e0 genl_family_rcv_msg_doit+0x1cc/0x2a0 genl_rcv_msg+0x3c9/0x670 netlink_rcv_skb+0x12c/0x360 genl_rcv+0x24/0x40 netlink_unicast+0x435/0x6f0 netlink_sendmsg+0x7a0/0xc70 sock_sendmsg+0xc5/0x190 __sys_sendto+0x1c8/0x290 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 -> #0 (&devlink->lock_key#14){+.+.}-{3:3}: check_prev_add+0x1af/0x2300 __lock_acquire+0x31d7/0x4eb0 lock_acquire+0x1c3/0x500 __mutex_lock+0x14c/0x1b20 devlink_rel_devlink_handle_put+0x11e/0x2d0 devlink_nl_port_fill+0xddf/0x1b00 devlink_port_notify+0xb5/0x220 __devlink_port_type_set+0x151/0x510 devlink_port_netdevice_event+0x17c/0x220 notifier_call_chain+0x97/0x240 unregister_netdevice_many_notify+0x876/0x1790 unregister_netdevice_queue+0x274/0x350 unregister_netdev+0x18/0x20 mlx5e_vport_rep_unload+0xc5/0x1c0 [mlx5_core] __esw_offloads_unload_rep+0xd8/0x130 [mlx5_core] mlx5_esw_offloads_rep_unload+0x52/0x70 [mlx5_core] mlx5_esw_offloads_unload_rep+0x85/0xc0 [mlx5_core] mlx5_eswitch_unload_sf_vport+0x41/0x90 [mlx5_core] mlx5_devlink_sf_port_del+0x120/0x280 [mlx5_core] genl_family_rcv_msg_doit+0x1cc/0x2a0 genl_rcv_msg+0x3c9/0x670 netlink_rcv_skb+0x12c/0x360 genl_rcv+0x24/0x40 netlink_unicast+0x435/0x6f0 netlink_sendmsg+0x7a0/0xc70 sock_sendmsg+0xc5/0x190 __sys_sendto+0x1c8/0x290 __x64_sys_sendto+0xdc/0x1b0 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 other info that might help us debug this: Chain exists of: &devlink->lock_key#14 --> mlx5_intf_mutex --> rtnl_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(rtnl_mutex); lock(mlx5_intf_mutex); lock(rtnl_mutex); lock(&devlink->lock_key#14); Problem is taking the devlink instance lock of nested instance when RTNL is already held. To fix this, don't take the devlink instance lock when putting nested handle. Instead, rely on the preparations done by previous two patches to be able to access device pointer and obtain netns id without devlink instance lock held. Fixes: c137743bce02 ("devlink: introduce object and nested devlink relationship infra") Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-18devlink: take device reference for devlink objectJiri Pirko1-1/+2
In preparation to allow to access device pointer without devlink instance lock held, make sure the device pointer is usable until devlink_release() is called. Fixes: c137743bce02 ("devlink: introduce object and nested devlink relationship infra") Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-18devlink: call peernet2id_alloc() with net pointer under RCU read lockJiri Pirko1-3/+9
peernet2id_alloc() allows to be called lockless with peer net pointer obtained in RCU critical section and makes sure to return ns ID if net namespaces is not being removed concurrently. Benefit from read_pnet_rcu() helper addition, use it to obtain net pointer under RCU read lock and pass it to peernet2id_alloc() to get ns ID. Fixes: c137743bce02 ("devlink: introduce object and nested devlink relationship infra") Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-14/+16
Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: kernel/bpf/verifier.c 829955981c55 ("bpf: Fix verifier log for async callback return values") a923819fb2c5 ("bpf: Treat first argument as return value for bpf_throw") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-06devlink: Hold devlink lock on health reporter dump getMoshe Shemesh1-14/+16
Devlink health dump get callback should take devlink lock as any other devlink callback. Otherwise, since devlink_mutex was removed, this callback is not protected from a race of the reporter being destroyed while handling the callback. Add devlink lock to the callback and to any call for devlink_health_do_dump(). This should be safe as non of the drivers dump callback implementation takes devlink lock. As devlink lock is added to any callback of dump, the reporter dump_lock is now redundant and can be removed. Fixes: d3efc2a6a6d8 ("net: devlink: remove devlink_mutex") Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://lore.kernel.org/r/1696510216-189379-1-git-send-email-moshe@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-09-17devlink: introduce possibility to expose info about nested devlinksJiri Pirko3-0/+52
In mlx5, there is a devlink instance created for PCI device. Also, one separate devlink instance is created for auxiliary device that represents the netdev of uplink port. This relation is currently invisible to the devlink user. Benefit from the rel infrastructure and allow for nested devlink instance to set the relationship for the nested-in devlink instance. Note that there may be many nested instances, therefore use xarray to hold the list of rel_indexes for individual nested instances. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-17devlink: convert linecard nested devlink to new rel infrastructureJiri Pirko1-13/+34
Benefit from the newly introduced rel infrastructure, treat the linecard nested devlink instances in the same way as port function instances. Convert the code to use the rel infrastructure. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-17devlink: expose peer SF devlink instanceJiri Pirko1-0/+51
Introduce a new helper devl_port_fn_devlink_set() to be used by driver assigning a devlink instance to the peer devlink port function. Expose this to user over new netlink attribute nested under port function nest to expose devlink handle related to the port function. This is particularly helpful for user to understand the relationship between devlink instances created for SFs and the port functions they belong to. Note that caller of devlink_port_notify() needs to hold devlink instance lock, put the assertion to devl_port_fn_devlink_set() to make this requirement explicit. Also note the limitations that only allow to make this assignment for registered objects. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-17devlink: introduce object and nested devlink relationship infraJiri Pirko3-0/+233
It is a bit tricky to maintain relationship between devlink objects and nested devlink instances due to following aspects: 1) Locking. It is necessary to lock the devlink instance that contains the object first, only after that to lock the nested instance. 2) Lifetimes. Objects (e.g devlink port) may be removed before the nested devlink instance. 3) Notifications. If nested instance changes (e.g. gets registered/unregistered) the nested-in object needs to send appropriate notifications. Resolve this by introducing an xarray that holds 1:1 relationships between devlink object and related nested devlink instance. Use that xarray index to get the object/nested devlink instance on the other side. Provide necessary helpers: devlink_rel_nested_in_add/clear() to add and clear the relationship. devlink_rel_nested_in_notify() to call the nested-in object to send notifications during nested instance register/unregister/netns change. devlink_rel_devlink_handle_put() to be used by nested-in object fill function to fill the nested handle. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-17devlink: extend devlink_nl_put_nested_handle() with attrtype argJiri Pirko3-4/+5
As the next patch is going to call this helper with need to fill another type of nested attribute, pass it over function arg. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-17devlink: move devlink_nl_put_nested_handle() into netlink.cJiri Pirko3-26/+28
As the next patch is going to call this helper out of the linecard.c, move to netlink.c. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-17devlink: put netnsid to nested handleJiri Pirko1-2/+11
If netns of devlink instance and nested devlink instance differs, put netnsid attr to indicate that. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-17devlink: move linecard struct into linecard.cJiri Pirko3-15/+22
Instead of exposing linecard struct, expose a simple helper to get the linecard index, which is all is needed outside linecard.c. Move the linecard struct to linecard.c and keep it private similar to the rest of the devlink objects. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-28devlink: move devlink_notify_register/unregister() to dev.cJiri Pirko4-64/+30
At last, move the last bits out of leftover.c, the devlink_notify_register/unregister() functions to dev.c Signed-off-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20230828061657.300667-16-jiri@resnulli.us Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-28devlink: move small_ops definition into netlink.cJiri Pirko3-253/+251
Move the generic netlink small_ops definition where they are consumed, into netlink.c Signed-off-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20230828061657.300667-15-jiri@resnulli.us Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-28devlink: move tracepoint definitions into core.cJiri Pirko2-6/+6
Move remaining tracepoint definitions to most suitable file core.c. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20230828061657.300667-14-jiri@resnulli.us Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-01 00:21:02 +0000