summaryrefslogtreecommitdiff
path: root/net/core
AgeCommit message (Collapse)AuthorFilesLines
2011-08-24net: convert core to skb paged frag APIsIan Campbell7-36/+36
Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-24rps: support IPIP encapsulationEric Dumazet1-0/+2
Skip IPIP header to get proper layer-4 information. Like GRE tunnels, this only works if rxhash is not already provided by the device itself (ethtool -K ethX rxhash off), to allow kernel compute a software rxhash. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-22net: vlan: goto another_round instead of calling __netif_receive_skbJiri Pirko1-4/+3
Now, when vlan tag on untagged in non-accelerated path is stripped from skb, headers are reset right away. Benefit from that and avoid calling __netif_receive_skb recursivelly and just use another_round. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-20net: Preserve ooo_okay when copying skb headerChangli Gao1-0/+1
Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-20Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
2011-08-18net: rps: support PPPOE session messagesChangli Gao1-0/+8
Inspect the payload of PPPOE session messages for the 4 tuples to generate skb->rxhash. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-18net: rps: support 802.1QChangli Gao1-0/+8
For the 802.1Q packets, if the NIC doesn't support hw-accel-vlan-rx, RPS won't inspect the internal 4 tuples to generate skb->rxhash, so this kind of traffic can't get any benefit from RPS. This patch adds the support for 802.1Q to RPS. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-17net: remove ndo_set_multicast_list callbackJiri Pirko2-6/+4
Remove no longer used operation. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-17net: introduce IFF_UNICAST_FLT private flagJiri Pirko1-6/+6
Use IFF_UNICAST_FTL to find out if driver handles unicast address filtering. In case it does not, promisc mode is entered. Patch also fixes following drivers: stmmac, niu: support uc filtering and yet it propagated ndo_set_multicast_list bna, benet, pxa168_eth, ks8851, ks8851_mll, ksz884x : has set ndo_set_rx_mode but do not support uc filtering Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-17rps: Inspect GRE encapsulated packets to get flow hashTom Herbert1-0/+22
Crack open GRE packets in __skb_get_rxhash to compute 4-tuple hash on in encapsulated packet. Note that this is used only when the __skb_get_rxhash is taken, in particular only when the device does not compute provide the rxhash (ie. feature is disabled). This was tested by creating a single GRE tunnel between two 16 core AMD machines. 200 netperf TCP_RR streams were ran with 1 byte request and response size. Without patch: 157497 tps, 50/90/99% latencies 1250/1292/1364 usecs With patch: 325896 tps, 50/90/99% latencies 603/848/1169 Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-17rps: Infrastructure in __skb_get_rxhash for deep inspectionTom Herbert1-0/+7
Basics for looking for ports in encapsulated packets in tunnels. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-17rps: Add flag to skb to indicate rxhash is based on L4 tupleTom Herbert2-4/+7
The l4_rxhash flag was added to the skb structure to indicate that the rxhash value was computed over the 4 tuple for the packet which includes the port information in the encapsulated transport packet. This is used by the stack to preserve the rxhash value in __skb_rx_tunnel. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-17rps: Some minor cleanup in get_rps_cpusTom Herbert1-5/+7
Use some variables for clarity and extensibility. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-12net: cleanup some rcu_dereference_rawEric Dumazet3-8/+8
RCU api had been completed and rcu_access_pointer() or rcu_dereference_protected() are better than generic rcu_dereference_raw() Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-12neigh: reduce arp latencyEric Dumazet1-14/+26
Remove the artificial HZ latency on arp resolution. Instead of firing a timer in one jiffy (up to 10 ms if HZ=100), lets send the ARP message immediately. Before patch : # arp -d 192.168.20.108 ; ping -c 3 192.168.20.108 PING 192.168.20.108 (192.168.20.108) 56(84) bytes of data. 64 bytes from 192.168.20.108: icmp_seq=1 ttl=64 time=9.91 ms 64 bytes from 192.168.20.108: icmp_seq=2 ttl=64 time=0.065 ms 64 bytes from 192.168.20.108: icmp_seq=3 ttl=64 time=0.061 ms After patch : $ arp -d 192.168.20.108 ; ping -c 3 192.168.20.108 PING 192.168.20.108 (192.168.20.108) 56(84) bytes of data. 64 bytes from 192.168.20.108: icmp_seq=1 ttl=64 time=0.152 ms 64 bytes from 192.168.20.108: icmp_seq=2 ttl=64 time=0.064 ms 64 bytes from 192.168.20.108: icmp_seq=3 ttl=64 time=0.074 ms Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-11rtnetlink: remove initialization of dev->real_num_tx_queuesJiri Pirko1-1/+0
dev->real_num_tx_queues is correctly set already in alloc_netdev_mqs. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-11scm: Capture the full credentials of the scm senderTim Chen1-1/+1
This patch corrects an erroneous update of credential's gid with uid introduced in commit 257b5358b32f17 since 2.6.36. Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Reviewed-by: James Morris <jmorris@namei.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-09net: fix potential neighbour race in dst_ifdown()Eric Dumazet1-5/+10
Followup of commit f2c31e32b378a (fix NULL dereferences in check_peer_redir()). We need to make sure dst neighbour doesnt change in dst_ifdown(). Fix some sparse errors. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-07Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller3-3/+200
2011-08-06net: Compute protocol sequence numbers and fragment IDs using MD5.David S. Miller2-1/+185
Computers have become a lot faster since we compromised on the partial MD4 hash which we use currently for performance reasons. MD5 is a much safer choice, and is inline with both RFC1948 and other ISS generators (OpenBSD, Solaris, etc.) Furthermore, only having 24-bits of the sequence number be truly unpredictable is a very serious limitation. So the periodic regeneration and 8-bit counter have been removed. We compute and use a full 32-bit sequence number. For ipv6, DCCP was found to use a 32-bit truncated initial sequence number (it needs 43-bits) and that is fixed here as well. Reported-by: Dan Kaminsky <dan@doxpara.com> Tested-by: Willy Tarreau <w@1wt.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-02rcu: convert uses of rcu_assign_pointer(x, NULL) to RCU_INIT_POINTERStephen Hemminger6-10/+10
When assigning a NULL value to an RCU protected pointer, no barrier is needed. The rcu_assign_pointer, used to handle that but will soon change to not handle the special case. Convert all rcu_assign_pointer of NULL value. //smpl @@ expression P; @@ - rcu_assign_pointer(P, NULL) + RCU_INIT_POINTER(P, NULL) // </smpl> Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-01net: add kerneldoc to skb_copy_bits()Eric Dumazet1-2/+15
Since skb_copy_bits() is called from assembly, add a fat comment to make clear we should think twice before changing its prototype. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2-5/+7
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (32 commits) tg3: Remove 5719 jumbo frames and TSO blocks tg3: Break larger frags into 4k chunks for 5719 tg3: Add tx BD budgeting code tg3: Consolidate code that calls tg3_tx_set_bd() tg3: Add partial fragment unmapping code tg3: Generalize tg3_skb_error_unmap() tg3: Remove short DMA check for 1st fragment tg3: Simplify tx bd assignments tg3: Reintroduce tg3_tx_ring_info ASIX: Use only 11 bits of header for data size ASIX: Simplify condition in rx_fixup() Fix cdc-phonet build bonding: reduce noise during init bonding: fix string comparison errors net: Audit drivers to identify those needing IFF_TX_SKB_SHARING cleared net: add IFF_SKB_TX_SHARED flag to priv_flags net: sock_sendmsg_nosec() is static forcedeth: fix vlans gianfar: fix bug caused by 87c288c6e9aa31720b72e2bc2d665e24e1653c3e gro: Only reset frag0 when skb can be pulled ...
2011-07-27net: add IFF_SKB_TX_SHARED flag to priv_flagsNeil Horman1-3/+5
Pktgen attempts to transmit shared skbs to net devices, which can't be used by some drivers as they keep state information in skbs. This patch adds a flag marking drivers as being able to handle shared skbs in their tx path. Drivers are defaulted to being unable to do so, but calling ether_setup enables this flag, as 90% of the drivers calling ether_setup touch real hardware and can handle shared skbs. A subsequent patch will audit drivers to ensure that the flag is set properly Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Reported-by: Jiri Pirko <jpirko@redhat.com> CC: Robert Olsson <robert.olsson@its.uu.se> CC: Eric Dumazet <eric.dumazet@gmail.com> CC: Alexey Dobriyan <adobriyan@gmail.com> CC: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-26atomic: use <linux/atomic.h>Arun Sharma1-1/+1
This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: Arun Sharma <asharma@fb.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-25net: Convert struct net_device uc_promisc to boolJoe Perches1-2/+2
No need to use int, its uses are boolean. May save a few bytes one day. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-22net: allow netif_carrier to be called safely from IRQstephen hemminger1-1/+1
As reported by Ben Greer and Froncois Romieu. The code path in the netif_carrier code leads it to try and disable a late workqueue to reenable it immediately netif_carrier_on -> linkwatch_fire_event -> linkwatch_schedule_work -> cancel_delayed_work -> del_timer_sync If __cancel_delayed_work is used instead then there is no problem of waiting for running linkwatch_event. There is a race between linkwatch_event running re-scheduling but it is harmless to schedule an extra scan of the linkwatch queue. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-21ethtool: Allow zero-length register dumps againBen Hutchings1-2/+2
Some drivers (ab)use the ethtool_ops::get_regs operation to expose only a hardware revision ID. Commit a77f5db361ed9953b5b749353ea2c7fed2bf8d93 ('ethtool: Allocate register dump buffer with vmalloc()') had the side-effect of breaking these, as vmalloc() returns a null pointer for size=0 whereas kmalloc() did not. For backward-compatibility, allow zero-length dumps again. Reported-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Cc: stable@kernel.org [2.6.37+] Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-21skbuff: fix error handling in pskb_copy()Dan Carpenter1-1/+2
There are two problems: 1) "n" was allocated with alloc_skb() so we should free it with kfree_skb() instead of regular kfree(). 2) We return the freed pointer instead of NULL. Signed-off-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-17net: Abstract dst->neighbour accesses behind helpers.David S. Miller2-8/+9
dst_{get,set}_neighbour() Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-17neigh: Pass neighbour entry to output ops.David S. Miller1-11/+14
This will get us closer to being able to do "neigh stuff" completely independent of the underlying dst_entry for protocols (ipv4/ipv6) that wish to do so. We will also be able to make dst entries neigh-less. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-16neigh: Kill ndisc_ops->queue_xmitDavid S. Miller1-2/+2
It is always dev_queue_xmit(). Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-16neigh: Kill hh_cache->hh_outputDavid S. Miller1-23/+2
It's just taking on one of two possible values, either neigh_ops->output or dev_queue_xmit(). And this is purely depending upon whether nud_state has NUD_CONNECTED set or not. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-16neigh: Kill neigh_ops->hh_outputDavid S. Miller1-2/+2
It's always dev_queue_xmit(). Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-16neigh: Simply destroy handling wrt. hh_cache.David S. Miller1-9/+0
Now that hh_cache entries are embedded inside of neighbour entries, their lifetimes and accesses are now synchronous to that of the encompassing neighbour object. Therefore we don't need to hook up the blackhole op to hh_output on destroy. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-14net: remove /sys/class/net/*/featuresMichał Mirosław1-2/+0
The same information and more can be obtained by using ethtool with ETHTOOL_GFEATURES. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-14net: unexport netdev_fix_features()Michał Mirosław1-2/+1
It is not used anywhere except net/core/dev.c now. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-14net: cleanup vlan_features setting in register_netdevMichał Mirosław1-5/+2
vlan_features contains features inherited from underlying device. NETIF_SOFT_FEATURES are not inherited but belong to the vlan device itself (ensured in vlan_dev_fix_features()). Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-14net: Embed hh_cache inside of struct neighbour.David S. Miller2-66/+22
Now that there is a one-to-one correspondance between neighbour and hh_cache entries, we no longer need: 1) dynamic allocation 2) attachment to dst->hh 3) refcounting Initialization of the hh_cache entry is indicated by hh_len being non-zero, and such initialization is always done with the neighbour's lock held as a writer. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-13net: Kill support for multiple hh_cache entries per neighbourDavid S. Miller1-19/+18
This never, ever, happens. Neighbour entries are always tied to one address family, and therefore one set of dst_ops, and therefore one dst_ops->protocol "hh_type" value. This capability was blindly imported by Alexey Kuznetsov when he wrote the neighbour layer. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-13net: Push protocol type directly down to header_ops->cache()David S. Miller1-1/+1
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-11ipv4: Use universal hash for ARP.David S. Miller1-0/+1
We need to make sure the multiplier is odd. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-11neigh: Store hash shift instead of mask.David S. Miller1-24/+23
And mask the hash function result by simply shifting down the "->hash_shift" most significant bits. Currently which bits we use is arbitrary since jhash produces entropy evenly across the whole hash function result. But soon we'll be using universal hashing functions, and in those cases more entropy exists in the higher bits than the lower bits, because they use multiplies. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-09skbuff: clear tx zero-copy flagShirley Ma1-0/+3
This patch clears tx zero-copy flag as needed. Signed-off-by: Shirley Ma <xma@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-08Merge branch 'master' of ↵John W. Linville1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem
2011-07-07skbuff: skb supports zero-copy buffersShirley Ma1-1/+79
This patch adds userspace buffers support in skb shared info. A new struct skb_ubuf_info is needed to maintain the userspace buffers argument and index, a callback is used to notify userspace to release the buffers once lower device has done DMA (Last reference to that skb has gone). If there is any userspace apps to reference these userspace buffers, then these userspaces buffers will be copied into kernel. This way we can prevent userspace apps from holding these userspace buffers too long. Use destructor_arg to point to the userspace buffer info; a new tx flags SKBTX_DEV_ZEROCOPY is added for zero-copy buffer check. Signed-off-by: Shirley Ma <xma@...ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-05Merge branch 'master' of ↵David S. Miller1-2/+4
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2011-07-05net: Add GSO to vlan_features initializationShan Wei1-4/+5
Just add GSO to vlan_features initialization, and update comments. When we set offload features, vlan_dev_fix_features() will do more check. In vlan_dev_fix_features(), final features is decided by features of real device and vlan_features of real device. Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-05NFC: add NFC socket familyAloisio Almeida Jr1-3/+3
Signed-off-by: Lauro Ramos Venancio <lauro.venancio@openbossa.org> Signed-off-by: Aloisio Almeida Jr <aloisio.almeida@openbossa.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-03netpoll: Remove wrapper function netpoll_pollJoe Perches1-7/+2
Too trivial to live. cc: WANG Cong <amwang@redhat.com> Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-24 15:08:29 +0000