summaryrefslogtreecommitdiff
path: root/net/batman-adv/hard-interface.c
AgeCommit message (Collapse)AuthorFilesLines
2014-05-22batman: fix a bogus warning from batadv_is_on_batman_iface()Cong Wang1-1/+1
batman tries to search dev->iflink to check if it's a batman interface, but ->iflink could be 0, which is not a valid ifindex. It should just avoid iflink == 0 case. Reported-by: Jet Chen <jet.chen@intel.com> Tested-by: Jet Chen <jet.chen@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Antonio Quartulli <antonio@open-mesh.com> Cc: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Cong Wang <cwang@twopensource.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-17batman-adv: fix soft-interface MTU computationAntonio Quartulli1-8/+14
The current MTU computation always returns a value smaller than 1500bytes even if the real interfaces have an MTU large enough to compensate the batman-adv overhead. Fix the computation by properly returning the highest admitted value. Introduced by a19d3d85e1b854e4a483a55d740a42458085560d ("batman-adv: limit local translation table max size") Reported-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2014-01-14batman-adv: use __dev_get_by_index instead of dev_get_by_index to find interfaceYing Xue1-3/+1
The following call chains indicate that batadv_is_on_batman_iface() is always under rtnl_lock protection as call_netdevice_notifier() is protected by rtnl_lock. So if __dev_get_by_index() rather than dev_get_by_index() is used to find interface handler in it, this would help us avoid to change interface reference counter. call_netdevice_notifier() batadv_hard_if_event() batadv_hardif_add_interface() batadv_is_valid_iface() batadv_is_on_batman_iface() Cc: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Ying Xue <ying.xue@windriver.com> Acked-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-12batman-adv: update copyright years for 2014Simon Wunderlich1-1/+1
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-01-12batman-adv: add debugfs structure for information per interfaceSimon Wunderlich1-0/+9
To show information per interface, add a debugfs hardif structure similar to the system in sysfs. Hard interface folders will be created in "$debugfs/batman-adv/". Files are not yet added. Signed-off-by: Simon Wunderlich <simon@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2014-01-08batman-adv: remove FSF address from GPL disclaimerAntonio Quartulli1-3/+1
As suggested by checkpatch, remove all the references to the FSF address since the kernel already has one reference in its documentation. In this way it is easier to update it in case of future changes. Signed-off-by: Antonio Quartulli <antonio@meshcoding.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2013-10-23batman-adv: invoke dev_get_by_index() outside of is_wifi_iface()Antonio Quartulli1-29/+4
Upcoming changes need to perform other checks on the incoming net_device struct. To avoid performing dev_get_by_index() for each and every check, it is better to move it outside of is_wifi_iface() and search the netdev object once only. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2013-10-23batman-adv: send GW_DEL event in case of soft-iface destructionAntonio Quartulli1-2/+7
In case of soft_iface destruction send a GW DEL event to userspace so that applications which are listening for GW events are informed about the lost of connectivity and can react accordingly. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2013-10-23batman-adv: limit local translation table max sizeMarek Lindner1-15/+26
The local translation table size is limited by what can be transferred from one node to another via a full table request. The number of entries fitting into a full table request depend on whether the fragmentation is enabled or not. Therefore this patch introduces a max table size check and refuses to add more local clients when that size is reached. Moreover, if the max full table packet size changes (MTU change or fragmentation is disabled) the local table is downsized instantaneously. Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Antonio Quartulli <ordex@autistici.org>
2013-10-19batman-adv: add per VLAN interface attribute frameworkAntonio Quartulli1-0/+2
Since batman-adv is now fully VLAN-aware, a proper framework able to handle per-vlan-interface attributes is needed. Those attributes will affect the associated VLAN interface only, rather than the real soft_iface (which would result in every vlan interface having the same attribute configuration). To make the code simpler and easier to extend, attributes associated to the standalone soft_iface are now treated like belonging to yet another vlan having a special vid. This vid is different from the others because it is made up by all zeros and the VLAN_HAS_TAG bit is not set. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-10-12batman-adv: consider network coding overhead when calculating required mtuMarek Lindner1-9/+10
The module prints a warning when the MTU on the hard interface is too small to transfer payload traffic without fragmentation. The required MTU is calculated based on the encapsulation header size. If network coding is compild into the module its header size is taken into account as well. Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-10-12batman-adv: use htons when possibleAntonio Quartulli1-1/+1
When comparing a network ordered value with a constant, it is better to convert the constant at compile time by means of htons() instead of converting the value at runtime using ntohs(). This refactoring may slightly improve the code performance. Moreover substitute __constant_htons() with htons() since the latter increase readability and it is smart enough to be as efficient as the former Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
2013-10-12batman-adv: Remove old fragmentation codeMartin Hundebøll1-1/+0
Remove the existing fragmentation code before adding the new version and delete unicast.{h,c}. batadv_unicast_send_skb() is moved to send.c and renamed to batadv_send_skb_unicast(). fragmentation entry in sysfs (bat_priv->fragmentation) is kept for use in the new fragmentation code. BATADV_UNICAST_FRAG packet type is renamed to BATADV_FRAG for use in the new fragmentation code. Signed-off-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-10-09batman-adv: remove vis functionalitySimon Wunderlich1-9/+0
This is replaced by a userspace program, we don't need this functionality to bloat the kernel. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
2013-05-29batman-adv: don't initialise batman_iv private members in hard-interface.cAntonio Quartulli1-7/+1
hard-interface.c has to do not contain any routing algorithm specific code. Allocate the hard-interface with kzalloc() and remove any useless and algorithm specific member initialisation Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-05-29batman-adv: send each broadcast only once on non-wireless interfacesMatthias Schiffer1-0/+4
While it makes sense to send each broadcast thrice on 802.11 (WLAN) interfaces as broadcasts are often unreliable on these, there is no reason to do so on other interface types. The increased the overhead can be harmful on low-bandwidth links like VPN connections over slow internet lines, therefore it is better to reduce the number of broadcast packets sent on non-wireless links to one. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-05-29batman-adv: split batadv_is_wifi_iface() into two functionsMatthias Schiffer1-32/+52
Previously batadv_is_wifi_iface() did two things at once: looking up a net_device from an interface index, and determining if it is a wifi device. The second part is useful itself when the caller already has a net_device reference. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-05-28net: pass info struct via netdevice notifierJiri Pirko1-1/+1
So far, only net_device * could be passed along with netdevice notifier event. This patch provides a possibility to pass custom structure able to provide info that event listener needs to know. Signed-off-by: Jiri Pirko <jiri@resnulli.us> v2->v3: fix typo on simeth shortened dev_getter shortened notifier_info struct name v1->v2: fix notifier_call parameter in call_netdevice_notifier() Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-27batman-adv: free an hard-interface before adding itAntonio Quartulli1-6/+33
When adding a new hard interface (e.g. wlan0) to a soft interface (e.g. bat0) and the former is already enslaved in another virtual interface (e.g. a software bridge) batman-adv has to free it first and then continue with the adding mechanism. In this way the behaviour becomes consistent with what "ip link set master" does. At the moment batman-adv enslaves the hard interface without checking for the master device, possibly causing strange behaviours which are never wanted by the users. Reported-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-03-27batman-adv: Allow to modify slaves of soft-interfaces through rntl_linkSven Eckelmann1-2/+10
The sysfs configuration interface of batman-adv to add/remove slaves of an soft-iface is not deadlock free and doesn't follow the currently common way to modify slaves of an interface. An additional configuration interface though rtnl_link is introduced which provides easy device adding/removing with tools like "ip": $ ip link set dev eth0 master bat0 $ ip link set dev eth0 nomaster Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-03-27batman-adv: rename batadv_softif_destroy to reflect sysfs use caseMarek Lindner1-1/+1
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> CC: Sven Eckelmann <sven@narfation.org> Acked-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-03-27batman-adv: Don't always delete softif when last slave was removedSven Eckelmann1-3/+5
batman-adv has an unusual way to manage softinterfaces. These will be created automatically when a user writes to the batman-adv/mesh_iface file in sysfs and removed when no slave device exists anymore. This behaviour cannot be changed without breaking compatibility with existing code. Instead other interfaces should be able to slightly reduce this behaviour and provide a more common reaction to a removal of a slave interface. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-03-27batman-adv: Move soft-interface initialization to ndo_initSven Eckelmann1-0/+5
The initialization of an net_device object should be done in the init/constructor function and not from the outside after the register_netdevice was done to avoid race conditions. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Acked-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2013-01-19batman-adv: update copyright yearsAntonio Quartulli1-1/+1
Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-01-19batman-adv: postpone sysfs removal when unregisteringSimon Wunderlich1-2/+22
When processing the unregister notify for a hard interface, removing the sysfs files may lead to a circular deadlock (rtnl mutex <-> s_active). To overcome this problem, postpone the sysfs removal in a worker. Reported-by: Sasha Levin <sasha.levin@oracle.com> Reported-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-11-30batman-adv: use ETH_P_BATMANAntonio Quartulli1-1/+2
The ETH_P_BATMAN ethertype is now defined kernel-wide. Use it instead of the private BATADV_ETH_P_BATMAN define. Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2012-11-14batman-adv: prevent using any virtual device created on batman-adv as ↵Antonio Quartulli1-1/+40
hard-interface Any virtual device created on top of a batman-adv mesh interface must be prevented to be used to create a new mesh network (this would lead to an unwanted batman-over-batman configuration) Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-11-07batman-adv: Distributed ARP Table - create DHT helper functionsAntonio Quartulli1-0/+3
Add all the relevant functions in order to manage a Distributed Hash Table over the B.A.T.M.A.N.-adv network. It will later be used to store several ARP entries and implement DAT (Distributed ARP Table) Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-10-29batman-adv: split hard_iface struct for each routing protocolMarek Lindner1-2/+2
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-08-23batman-adv: Split batadv_priv in sub-structures for featuresSven Eckelmann1-2/+3
The structure batadv_priv grows everytime a new feature is introduced. It gets hard to find the parts of the struct that belongs to a specific feature. This becomes even harder by the fact that not every feature uses a prefix in the member name. The variables for bridge loop avoidence, gateway handling, translation table and visualization server are moved into separate structs that are included in the bat_priv main struct. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-08-23batman-adv: check batadv_orig_hash_add_if() return codeSimon Wunderlich1-1/+7
If this call fails, some of the orig_nodes spaces may have been resized for the increased number of interface, and some may not. If we would just continue with the larger number of interfaces, this would lead to access to not allocated memory later. We better check the return code, and don't add the interface if no memory is available. OTOH, keeping some of the orig_nodes with too much memory allocated should hurt no one (except for a few too many bytes allocated). Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-07-01batman-adv: Fix alignment after opened parenthesesSven Eckelmann1-4/+4
Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-07-01batman-adv: Remove bat_ prefix from bat_{debugfs, sysfs}.{c, h}Sven Eckelmann1-1/+1
The "bat_" prefix in the source files implementing the batman-adv sysfs and debugfs interface doesn't have a special meaning and are only used by these files and files that implement the actual B.A.T.M.A.N. path finding algorithm. The prefix is better suited to mark files that are used to implement the main part of the path finding. All other files should not use it and therefore gets renamed. Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-07-01batman-adv: Prefix types structs with batadv_Sven Eckelmann1-33/+38
Reported-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-07-01batman-adv: Prefix packet structs with batadv_Sven Eckelmann1-2/+2
Reported-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-07-01batman-adv: Prefix hard-interface enum with BATADV_Sven Eckelmann1-20/+20
Reported-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-06-28batman-adv: Prefix main defines with BATADV_Sven Eckelmann1-1/+1
Reported-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-06-28batman-adv: Prefix types defines with BATADV_Sven Eckelmann1-5/+6
Reported-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-06-28batman-adv: Prefix packet defines with BATADV_Sven Eckelmann1-1/+2
Reported-by: Martin Hundebøll <martin@hundeboll.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-06-28batman-adv: Prefix remaining function like macros with batadv_Sven Eckelmann1-19/+19
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-06-25batman-adv: Prefix hard-interface local static functions with batadv_Sven Eckelmann1-31/+33
All non-static symbols of batman-adv were prefixed with batadv_ to avoid collisions with other symbols of the kernel. Other symbols of batman-adv should use the same prefix to keep the naming scheme consistent. Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-06-25batman-adv: Prefix main static inline functions with batadv_Sven Eckelmann1-2/+2
All non-static symbols of batman-adv were prefixed with batadv_ to avoid collisions with other symbols of the kernel. Other symbols of batman-adv should use the same prefix to keep the naming scheme consistent. Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-06-24batman-adv: Prefix hard-interface static inline functions with batadv_Sven Eckelmann1-14/+14
All non-static symbols of batman-adv were prefixed with batadv_ to avoid collisions with other symbols of the kernel. Other symbols of batman-adv should use the same prefix to keep the naming scheme consistent. Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-06-20batman-adv: Reformat multiline comments to consistent styleSven Eckelmann1-14/+9
batman-adv doesn't follow the style for multiline comments that David S. Miller prefers. All comments should be reformatted to follow this consistent style to make the code slightly more readable. Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-06-20batman-adv: Prefix main non-static functions with batadv_Sven Eckelmann1-7/+7
batman-adv can be compiled as part of the kernel instead of an module. In that case the linker will see all non-static symbols of batman-adv and all other non-static symbols of the kernel. This could lead to symbol collisions. A prefix for the batman-adv symbols that defines their private namespace avoids such a problem. Reported-by: David Miller <davem@davemloft.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-06-20batman-adv: Prefix soft-interface non-static functions with batadv_Sven Eckelmann1-4/+4
batman-adv can be compiled as part of the kernel instead of an module. In that case the linker will see all non-static symbols of batman-adv and all other non-static symbols of the kernel. This could lead to symbol collisions. A prefix for the batman-adv symbols that defines their private namespace avoids such a problem. Reported-by: David Miller <davem@davemloft.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-06-20batman-adv: Prefix send non-static functions with batadv_Sven Eckelmann1-2/+2
batman-adv can be compiled as part of the kernel instead of an module. In that case the linker will see all non-static symbols of batman-adv and all other non-static symbols of the kernel. This could lead to symbol collisions. A prefix for the batman-adv symbols that defines their private namespace avoids such a problem. Reported-by: David Miller <davem@davemloft.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-06-20batman-adv: Prefix originator non-static functions with batadv_Sven Eckelmann1-3/+3
batman-adv can be compiled as part of the kernel instead of an module. In that case the linker will see all non-static symbols of batman-adv and all other non-static symbols of the kernel. This could lead to symbol collisions. A prefix for the batman-adv symbols that defines their private namespace avoids such a problem. Reported-by: David Miller <davem@davemloft.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-06-20batman-adv: Prefix hard-interface non-static functions with batadv_Sven Eckelmann1-16/+16
batman-adv can be compiled as part of the kernel instead of an module. In that case the linker will see all non-static symbols of batman-adv and all other non-static symbols of the kernel. This could lead to symbol collisions. A prefix for the batman-adv symbols that defines their private namespace avoids such a problem. Reported-by: David Miller <davem@davemloft.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
2012-06-20batman-adv: Prefix bridge_loop_avoidance non-static functions with batadv_Sven Eckelmann1-1/+1
batman-adv can be compiled as part of the kernel instead of an module. In that case the linker will see all non-static symbols of batman-adv and all other non-static symbols of the kernel. This could lead to symbol collisions. A prefix for the batman-adv symbols that defines their private namespace avoids such a problem. Reported-by: David Miller <davem@davemloft.net> Signed-off-by: Sven Eckelmann <sven@narfation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-17 19:40:35 +0000