| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing and bootconfig updates:
"Fixes and changes to bootconfig before it goes live in a release.
Change in API of bootconfig (before it comes live in a release):
- Have a magic value "BOOTCONFIG" in initrd to know a bootconfig
exists
- Set CONFIG_BOOT_CONFIG to 'n' by default
- Show error if "bootconfig" on cmdline but not compiled in
- Prevent redefining the same value
- Have a way to append values
- Added a SELECT BLK_DEV_INITRD to fix a build failure
Synthetic event fixes:
- Switch to raw_smp_processor_id() for recording CPU value in preempt
section. (No care for what the value actually is)
- Fix samples always recording u64 values
- Fix endianess
- Check number of values matches number of fields
- Fix a printing bug
Fix of trace_printk() breaking postponed start up tests
Make a function static that is only used in a single file"
* tag 'trace-v5.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
bootconfig: Fix CONFIG_BOOTTIME_TRACING dependency issue
bootconfig: Add append value operator support
bootconfig: Prohibit re-defining value on same key
bootconfig: Print array as multiple commands for legacy command line
bootconfig: Reject subkey and value on same parent key
tools/bootconfig: Remove unneeded error message silencer
bootconfig: Add bootconfig magic word for indicating bootconfig explicitly
bootconfig: Set CONFIG_BOOT_CONFIG=n by default
tracing: Clear trace_state when starting trace
bootconfig: Mark boot_config_checksum() static
tracing: Disable trace_printk() on post poned tests
tracing: Have synthetic event test use raw_smp_processor_id()
tracing: Fix number printing bug in print_synth_event()
tracing: Check that number of vals matches number of synth event fields
tracing: Make synth_event trace functions endian-correct
tracing: Make sure synth_event_trace() example always uses u64
|
|
Since commit d8a953ddde5e ("bootconfig: Set CONFIG_BOOT_CONFIG=n by
default") also changed the CONFIG_BOOTTIME_TRACING to select
CONFIG_BOOT_CONFIG to show the boot-time tracing on the menu,
it introduced wrong dependencies with BLK_DEV_INITRD as below.
WARNING: unmet direct dependencies detected for BOOT_CONFIG
Depends on [n]: BLK_DEV_INITRD [=n]
Selected by [y]:
- BOOTTIME_TRACING [=y] && TRACING_SUPPORT [=y] && FTRACE [=y] && TRACING [=y]
This makes the CONFIG_BOOT_CONFIG selects CONFIG_BLK_DEV_INITRD to
fix this error and make CONFIG_BOOTTIME_TRACING=n by default, so
that both boot-time tracing and boot configuration off but those
appear on the menu list.
Link: http://lkml.kernel.org/r/158264140162.23842.11237423518607465535.stgit@devnote2
Fixes: d8a953ddde5e ("bootconfig: Set CONFIG_BOOT_CONFIG=n by default")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Compiled-tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Print arraied values as multiple same options for legacy
kernel command line. With this rule, if the "kernel.*" and
"init.*" array entries in bootconfig are printed out as
multiple same options, e.g.
kernel {
console = "ttyS0,115200"
console += "tty0"
}
will be correctly converted to
console="ttyS0,115200" console="tty0"
in the kernel command line.
Link: http://lkml.kernel.org/r/158220118213.26565.8163300497009463916.stgit@devnote2
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Add bootconfig magic word to the end of bootconfig on initrd
image for indicating explicitly the bootconfig is there.
Also tools/bootconfig treats wrong size or wrong checksum or
parse error as an error, because if there is a bootconfig magic
word, there must be a bootconfig.
The bootconfig magic word is "#BOOTCONFIG\n", 12 bytes word.
Thus the block image of the initrd file with bootconfig is
as follows.
[Initrd][bootconfig][size][csum][#BOOTCONFIG\n]
Link: http://lkml.kernel.org/r/158220112263.26565.3944814205960612841.stgit@devnote2
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Set CONFIG_BOOT_CONFIG=n by default. This also warns
user if CONFIG_BOOT_CONFIG=n but "bootconfig" is given
in the kernel command line.
Link: http://lkml.kernel.org/r/158220111291.26565.9036889083940367969.stgit@devnote2
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
In fact, this function is only used in this file, so mark it with 'static'.
Link: http://lkml.kernel.org/r/1581852511-14163-1-git-send-email-hqjagain@gmail.com
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Various fixes:
- Fix an uninitialized variable
- Fix compile bug to bootconfig userspace tool (in tools directory)
- Suppress some error messages of bootconfig userspace tool
- Remove unneded CONFIG_LIBXBC from bootconfig
- Allocate bootconfig xbc_nodes dynamically. To ease complaints about
taking up static memory at boot up
- Use of parse_args() to parse bootconfig instead of strstr() usage
Prevents issues of double quotes containing the interested string
- Fix missing ring_buffer_nest_end() on synthetic event error path
- Return zero not -EINVAL on soft disabled synthetic event (soft
disabling must be the same as hard disabling, which returns zero)
- Consolidate synthetic event code (remove duplicate code)"
* tag 'trace-v5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Consolidate trace() functions
tracing: Don't return -EINVAL when tracing soft disabled synth events
tracing: Add missing nest end to synth_event_trace_start() error case
tools/bootconfig: Suppress non-error messages
bootconfig: Allocate xbc_nodes array dynamically
bootconfig: Use parse_args() to find bootconfig and '--'
tracing/kprobe: Fix uninitialized variable bug
bootconfig: Remove unneeded CONFIG_LIBXBC
tools/bootconfig: Fix wrong __VA_ARGS__ usage
|
|
The current implementation does a naive search of "bootconfig" on the kernel
command line. But this could find "bootconfig" that is part of another
option in quotes (although highly unlikely). But it also needs to find '--'
on the kernel command line to know if it should append a '--' or not when a
bootconfig in the initrd file has an "init" section. The check uses the
naive strstr() to find to see if it exists. But this can return a false
positive if it exists in an option and then the "init" section in the initrd
will not be appended properly.
Using parse_args() to find both of these will solve both of these problems.
Link: https://lore.kernel.org/r/202002070954.C18E7F58B@keescook
Fixes: 7495e0926fdf3 ("bootconfig: Only load bootconfig if "bootconfig" is on the kernel cmdline")
Fixes: 1319916209ce8 ("bootconfig: init: Allow admin to use bootconfig for init command line")
Reported-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Since there is no user except CONFIG_BOOT_CONFIG and no plan
to use it from other functions, CONFIG_LIBXBC can be removed
and we can use CONFIG_BOOT_CONFIG directly.
Link: http://lkml.kernel.org/r/158098769281.939.16293492056419481105.stgit@devnote2
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- Added new "bootconfig".
This looks for a file appended to initrd to add boot config options,
and has been discussed thoroughly at Linux Plumbers.
Very useful for adding kprobes at bootup.
Only enabled if "bootconfig" is on the real kernel command line.
- Created dynamic event creation.
Merges common code between creating synthetic events and kprobe
events.
- Rename perf "ring_buffer" structure to "perf_buffer"
- Rename ftrace "ring_buffer" structure to "trace_buffer"
Had to rename existing "trace_buffer" to "array_buffer"
- Allow trace_printk() to work withing (some) tracing code.
- Sort of tracing configs to be a little better organized
- Fixed bug where ftrace_graph hash was not being protected properly
- Various other small fixes and clean ups
* tag 'trace-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (88 commits)
bootconfig: Show the number of nodes on boot message
tools/bootconfig: Show the number of bootconfig nodes
bootconfig: Add more parse error messages
bootconfig: Use bootconfig instead of boot config
ftrace: Protect ftrace_graph_hash with ftrace_sync
ftrace: Add comment to why rcu_dereference_sched() is open coded
tracing: Annotate ftrace_graph_notrace_hash pointer with __rcu
tracing: Annotate ftrace_graph_hash pointer with __rcu
bootconfig: Only load bootconfig if "bootconfig" is on the kernel cmdline
tracing: Use seq_buf for building dynevent_cmd string
tracing: Remove useless code in dynevent_arg_pair_add()
tracing: Remove check_arg() callbacks from dynevent args
tracing: Consolidate some synth_event_trace code
tracing: Fix now invalid var_ref_vals assumption in trace action
tracing: Change trace_boot to use synth_event interface
tracing: Move tracing selftests to bottom of menu
tracing: Move mmio tracer config up with the other tracers
tracing: Move tracing test module configs together
tracing: Move all function tracing configs together
tracing: Documentation for in-kernel synthetic event API
...
|
|
Show the number of bootconfig nodes on boot message.
Link: http://lkml.kernel.org/r/158091062297.27924.9051634676068550285.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Use "bootconfig" (1 word) instead of "boot config" (2 words)
in the boot message.
Link: http://lkml.kernel.org/r/158091059459.27924.14414336187441539879.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
As the bootconfig is appended to the initrd it is not as easy to modify as
the kernel command line. If there's some issue with the kernel, and the
developer wants to boot a pristine kernel, it should not be needed to modify
the initrd to remove the bootconfig for a single boot.
As bootconfig is silently added (if the admin does not know where to look
they may not know it's being loaded). It should be explicitly added to the
kernel cmdline. The loading of the bootconfig is only done if "bootconfig"
is on the kernel command line. This will let admins know that the kernel
command line is extended.
Note, after adding printk()s for when the size is too great or the checksum
is wrong, exposed that the current method always looked for the boot config,
and if this size and checksum matched, it would parse it (as if either is
wrong a printk has been added to show this). It's better to only check this
if the boot config is asked to be looked for.
Link: https://lore.kernel.org/r/CAHk-=wjfjO+h6bQzrTf=YCZA53Y3EDyAs3Z4gEsT7icA3u_Psw@mail.gmail.com
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
protection" message
This message leads to thinking that memory protection is not implemented
for the said architecture, whereas absence of CONFIG_STRICT_KERNEL_RWX
only means that memory protection has not been selected at compile time.
Don't print this message when CONFIG_ARCH_HAS_STRICT_KERNEL_RWX is
selected by the architecture. Instead, print "Kernel memory protection
not selected by kernel config."
Link: http://lkml.kernel.org/r/62477e446d9685459d4f27d193af6ff1bd69d55f.1578557581.git.christophe.leroy@c-s.fr
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "init/main.c: minor cleanup/bugfix of envvar handling", v2.
unknown_bootoption passes unrecognized command line arguments to init as
either environment variables or arguments. Some of the logic in the
function is broken for quoted command line arguments.
When an argument of the form param="value" is processed by parse_args
and passed to unknown_bootoption, the command line has
param\0"value\0
with val pointing to the beginning of value. The helper function
repair_env_string is then used to restore the '=' character that was
removed by parse_args, and strip the quotes off fully. This results in
param=value\0\0
and val ends up pointing to the 'a' instead of the 'v' in value. This
bug was introduced when repair_env_string was refactored into a separate
function, and the decrement of val in repair_env_string became dead
code.
This causes two problems in unknown_bootoption in the two places where
the val pointer is used as a substitute for the length of param:
1. An argument of the form param=".value" is misinterpreted as a
potential module parameter, with the result that it will not be
placed in init's environment.
2. An argument of the form param="value" is checked to see if param is
an existing environment variable that should be overwritten, but the
comparison is off-by-one and compares 'param=v' instead of 'param='
against the existing environment. So passing, for example,
TERM="vt100" on the command line results in init being passed both
TERM=linux and TERM=vt100 in its environment.
Patch 1 adds logging for the arguments and environment passed to init
and is independent of the rest: it can be dropped if this is
unnecessarily verbose.
Patch 2 removes repair_env_string from initcall parameter parsing in
do_initcall_level, as that uses a separate copy of the command line now
and the repairing is no longer necessary.
Patch 3 fixes the bug in unknown_bootoption by recording the length of
param explicitly instead of implying it from val-param.
This patch (of 3):
Commit a99cd1125189 ("init: fix bug where environment vars can't be
passed via boot args") introduced two minor bugs in unknown_bootoption
by factoring out the quoted value handling into a separate function.
When value is quoted, repair_env_string will move the value up 1 byte to
strip the quotes, so val in unknown_bootoption no longer points to the
actual location of the value.
The result is that an argument of the form param=".value" is mistakenly
treated as a potential module parameter and is not placed in init's
environment, and an argument of the form param="value" can result in a
duplicate environment variable: eg TERM="vt100" on the command line will
result in both TERM=linux and TERM=vt100 being placed into init's
environment.
Fix this by recording the length of the param before calling
repair_env_string instead of relying on val.
Link: http://lkml.kernel.org/r/20191212180023.24339-4-nivedita@alum.mit.edu
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Krzysztof Mazur <krzysiek@podlesie.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Since commit 08746a65c296 ("init: fix in-place parameter modification
regression"), parse_args in do_initcall_level is called on a copy of
saved_command_line. It is unnecessary to call repair_env_string during
this parsing, as this copy is not used for anything later.
Remove the now unnecessary arguments from repair_env_string as well.
Link: http://lkml.kernel.org/r/20191212180023.24339-3-nivedita@alum.mit.edu
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Cc: Krzysztof Mazur <krzysiek@podlesie.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Extend logging in `run_init_process` to also show the arguments and
environment that we are passing to init.
Link: http://lkml.kernel.org/r/20191212180023.24339-2-nivedita@alum.mit.edu
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Krzysztof Mazur <krzysiek@podlesie.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is a small set of changes for 5.6-rc1 for the driver core and
some firmware subsystem changes.
Included in here are:
- device.h splitup like you asked for months ago
- devtmpfs minor cleanups
- firmware core minor changes
- debugfs fix for lockdown mode
- kernfs cleanup fix
- cpu topology minor fix
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (22 commits)
firmware: Rename FW_OPT_NOFALLBACK to FW_OPT_NOFALLBACK_SYSFS
devtmpfs: factor out common tail of devtmpfs_{create,delete}_node
devtmpfs: initify a bit
devtmpfs: simplify initialization of mount_dev
devtmpfs: factor out setup part of devtmpfsd()
devtmpfs: fix theoretical stale pointer deref in devtmpfsd()
driver core: platform: fix u32 greater or equal to zero comparison
cpu-topology: Don't error on more than CONFIG_NR_CPUS CPUs in device tree
debugfs: Return -EPERM when locked down
driver core: Print device when resources present in really_probe()
driver core: Fix test_async_driver_probe if NUMA is disabled
driver core: platform: Prevent resouce overflow from causing infinite loops
fs/kernfs/dir.c: Clean code by removing always true condition
component: do not dereference opaque pointer in debugfs
drivers/component: remove modular code
debugfs: Fix warnings when building documentation
device.h: move 'struct driver' stuff out to device/driver.h
device.h: move 'struct class' stuff out to device/class.h
device.h: move 'struct bus' stuff out to device/bus.h
device.h: move dev_printk()-like functions to dev_printk.h
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml
Pull UML updates from Anton Ivanov:
"I am sending this on behalf of Richard who is traveling.
This contains the following changes for UML:
- Fix for time travel mode
- Disable CONFIG_CONSTRUCTORS again
- A new command line option to have an non-raw serial line
- Preparations to remove obsolete UML network drivers"
* tag 'for-linus-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
um: Fix time-travel=inf-cpu with xor/raid6
Revert "um: Enable CONFIG_CONSTRUCTORS"
um: Mark non-vector net transports as obsolete
um: Add an option to make serial driver non-raw
|
|
Pull networking updates from David Miller:
1) Add WireGuard
2) Add HE and TWT support to ath11k driver, from John Crispin.
3) Add ESP in TCP encapsulation support, from Sabrina Dubroca.
4) Add variable window congestion control to TIPC, from Jon Maloy.
5) Add BCM84881 PHY driver, from Russell King.
6) Start adding netlink support for ethtool operations, from Michal
Kubecek.
7) Add XDP drop and TX action support to ena driver, from Sameeh
Jubran.
8) Add new ipv4 route notifications so that mlxsw driver does not have
to handle identical routes itself. From Ido Schimmel.
9) Add BPF dynamic program extensions, from Alexei Starovoitov.
10) Support RX and TX timestamping in igc, from Vinicius Costa Gomes.
11) Add support for macsec HW offloading, from Antoine Tenart.
12) Add initial support for MPTCP protocol, from Christoph Paasch,
Matthieu Baerts, Florian Westphal, Peter Krystad, and many others.
13) Add Octeontx2 PF support, from Sunil Goutham, Geetha sowjanya, Linu
Cherian, and others.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1469 commits)
net: phy: add default ARCH_BCM_IPROC for MDIO_BCM_IPROC
udp: segment looped gso packets correctly
netem: change mailing list
qed: FW 8.42.2.0 debug features
qed: rt init valid initialization changed
qed: Debug feature: ilt and mdump
qed: FW 8.42.2.0 Add fw overlay feature
qed: FW 8.42.2.0 HSI changes
qed: FW 8.42.2.0 iscsi/fcoe changes
qed: Add abstraction for different hsi values per chip
qed: FW 8.42.2.0 Additional ll2 type
qed: Use dmae to write to widebus registers in fw_funcs
qed: FW 8.42.2.0 Parser offsets modified
qed: FW 8.42.2.0 Queue Manager changes
qed: FW 8.42.2.0 Expose new registers and change windows
qed: FW 8.42.2.0 Internal ram offsets modifications
MAINTAINERS: Add entry for Marvell OcteonTX2 Physical Function driver
Documentation: net: octeontx2: Add RVU HW and drivers overview
octeontx2-pf: ethtool RSS config support
octeontx2-pf: Add basic ethtool support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
"The main changes are to move the ORC unwind table sorting from early
init to build-time - this speeds up booting.
No change in functionality intended"
* 'core-objtool-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/unwind/orc: Fix !CONFIG_MODULES build warning
x86/unwind/orc: Remove boot-time ORC unwind tables sorting
scripts/sorttable: Implement build-time ORC unwind table sorting
scripts/sorttable: Rename 'sortextable' to 'sorttable'
scripts/sortextable: Refactor the do_func() function
scripts/sortextable: Remove dead code
scripts/sortextable: Clean up the code to meet the kernel coding style better
scripts/sortextable: Rewrite error/success handling
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"The timekeeping and timers departement provides:
- Time namespace support:
If a container migrates from one host to another then it expects
that clocks based on MONOTONIC and BOOTTIME are not subject to
disruption. Due to different boot time and non-suspended runtime
these clocks can differ significantly on two hosts, in the worst
case time goes backwards which is a violation of the POSIX
requirements.
The time namespace addresses this problem. It allows to set offsets
for clock MONOTONIC and BOOTTIME once after creation and before
tasks are associated with the namespace. These offsets are taken
into account by timers and timekeeping including the VDSO.
Offsets for wall clock based clocks (REALTIME/TAI) are not provided
by this mechanism. While in theory possible, the overhead and code
complexity would be immense and not justified by the esoteric
potential use cases which were discussed at Plumbers '18.
The overhead for tasks in the root namespace (ie where host time
offsets = 0) is in the noise and great effort was made to ensure
that especially in the VDSO. If time namespace is disabled in the
kernel configuration the code is compiled out.
Kudos to Andrei Vagin and Dmitry Sofanov who implemented this
feature and kept on for more than a year addressing review
comments, finding better solutions. A pleasant experience.
- Overhaul of the alarmtimer device dependency handling to ensure
that the init/suspend/resume ordering is correct.
- A new clocksource/event driver for Microchip PIT64
- Suspend/resume support for the Hyper-V clocksource
- The usual pile of fixes, updates and improvements mostly in the
driver code"
* tag 'timers-core-2020-01-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (71 commits)
alarmtimer: Make alarmtimer_get_rtcdev() a stub when CONFIG_RTC_CLASS=n
alarmtimer: Use wakeup source from alarmtimer platform device
alarmtimer: Make alarmtimer platform device child of RTC device
alarmtimer: Update alarmtimer_get_rtcdev() docs to reflect reality
hrtimer: Add missing sparse annotation for __run_timer()
lib/vdso: Only read hrtimer_res when needed in __cvdso_clock_getres()
MIPS: vdso: Define BUILD_VDSO32 when building a 32bit kernel
clocksource/drivers/hyper-v: Set TSC clocksource as default w/ InvariantTSC
clocksource/drivers/hyper-v: Untangle stimers and timesync from clocksources
clocksource/drivers/timer-microchip-pit64b: Fix sparse warning
clocksource/drivers/exynos_mct: Rename Exynos to lowercase
clocksource/drivers/timer-ti-dm: Fix uninitialized pointer access
clocksource/drivers/timer-ti-dm: Switch to platform_get_irq
clocksource/drivers/timer-ti-dm: Convert to devm_platform_ioremap_resource
clocksource/drivers/em_sti: Fix variable declaration in em_sti_probe
clocksource/drivers/em_sti: Convert to devm_platform_ioremap_resource
clocksource/drivers/bcm2835_timer: Fix memory leak of timer
clocksource/drivers/cadence-ttc: Use ttc driver as platform driver
clocksource/drivers/timer-microchip-pit64b: Add Microchip PIT64B support
clocksource/drivers/hyper-v: Reserve PAGE_SIZE space for tsc page
...
|
|
Fix Kconfig help message since the bootconfig file is
only available to be appended to initramfs. And also
add a reference to the documentation.
Link: http://lkml.kernel.org/r/157949058031.25888.18399447161895787505.stgit@devnote2
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
This reverts commit 786b2384bf1c ("um: Enable CONFIG_CONSTRUCTORS").
There are two issues with this commit, uncovered by Anton in tests
on some (Debian) systems:
1) I completely forgot to call any constructors if CONFIG_CONSTRUCTORS
isn't set. Don't recall now if it just wasn't needed on my system, or
if I never tested this case.
2) With that fixed, it works - with CONFIG_CONSTRUCTORS *unset*. If I
set CONFIG_CONSTRUCTORS, it fails again, which isn't totally
unexpected since whatever wanted to run is likely to have to run
before the kernel init etc. that calls the constructors in this case.
Basically, some constructors that gcc emits (libc has?) need to run
very early during init; the failure mode otherwise was that the ptrace
fork test already failed:
----------------------
$ ./linux mem=512M
Core dump limits :
soft - 0
hard - NONE
Checking that ptrace can change system call numbers...check_ptrace : child exited with exitcode 6, while expecting 0; status 0x67f
Aborted
----------------------
Thinking more about this, it's clear that we simply cannot support
CONFIG_CONSTRUCTORS in UML. All the cases we need now (gcov, kasan)
involve not use of the __attribute__((constructor)), but instead
some constructor code/entry generated by gcc. Therefore, we cannot
distinguish between kernel constructors and system constructors.
Thus, revert this commit.
Cc: stable@vger.kernel.org [5.4+]
Fixes: 786b2384bf1c ("um: Enable CONFIG_CONSTRUCTORS")
Reported-by: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Anton Ivanov <anton.ivanov@cambridgegreys.co.uk>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
|
|
To support time namespaces in the vdso with a minimal impact on regular non
time namespace affected tasks, the namespace handling needs to be hidden in
a slow path.
The most obvious place is vdso_seq_begin(). If a task belongs to a time
namespace then the VVAR page which contains the system wide vdso data is
replaced with a namespace specific page which has the same layout as the
VVAR page. That page has vdso_data->seq set to 1 to enforce the slow path
and vdso_data->clock_mode set to VCLOCK_TIMENS to enforce the time
namespace handling path.
The extra check in the case that vdso_data->seq is odd, e.g. a concurrent
update of the vdso data is in progress, is not really affecting regular
tasks which are not part of a time namespace as the task is spin waiting
for the update to finish and vdso_data->seq to become even again.
If a time namespace task hits that code path, it invokes the corresponding
time getter function which retrieves the real VVAR page, reads host time
and then adds the offset for the requested clock which is stored in the
special VVAR page.
If VDSO time namespace support is disabled the whole magic is compiled out.
Initial testing shows that the disabled case is almost identical to the
host case which does not take the slow timens path. With the special timens
page installed the performance hit is constant time and in the range of
5-7%.
For the vdso functions which are not using the sequence count an
unconditional check for vdso_data->clock_mode is added which switches to
the real vdso when the clock_mode is VCLOCK_TIMENS.
[avagin: Make do_hres_timens() work with raw clocks too: choose vdso_data
pointer by CS_RAW offset.]
Suggested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20191112012724.250792-21-dima@arista.com
|
|
Time Namespace isolates clock values.
The kernel provides access to several clocks CLOCK_REALTIME,
CLOCK_MONOTONIC, CLOCK_BOOTTIME, etc.
CLOCK_REALTIME
System-wide clock that measures real (i.e., wall-clock) time.
CLOCK_MONOTONIC
Clock that cannot be set and represents monotonic time since
some unspecified starting point.
CLOCK_BOOTTIME
Identical to CLOCK_MONOTONIC, except it also includes any time
that the system is suspended.
For many users, the time namespace means the ability to changes date and
time in a container (CLOCK_REALTIME). Providing per namespace notions of
CLOCK_REALTIME would be complex with a massive overhead, but has a dubious
value.
But in the context of checkpoint/restore functionality, monotonic and
boottime clocks become interesting. Both clocks are monotonic with
unspecified starting points. These clocks are widely used to measure time
slices and set timers. After restoring or migrating processes, it has to be
guaranteed that they never go backward. In an ideal case, the behavior of
these clocks should be the same as for a case when a whole system is
suspended. All this means that it is required to set CLOCK_MONOTONIC and
CLOCK_BOOTTIME clocks, which can be achieved by adding per-namespace
offsets for clocks.
A time namespace is similar to a pid namespace in the way how it is
created: unshare(CLONE_NEWTIME) system call creates a new time namespace,
but doesn't set it to the current process. Then all children of the process
will be born in the new time namespace, or a process can use the setns()
system call to join a namespace.
This scheme allows setting clock offsets for a namespace, before any
processes appear in it.
All available clone flags have been used, so CLONE_NEWTIME uses the highest
bit of CSIGNAL. It means that it can be used only with the unshare() and
the clone3() system calls.
[ tglx: Adjusted paragraph about clone3() to reality and massaged the
changelog a bit. ]
Co-developed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://criu.org/Time_namespace
Link: https://lists.openvz.org/pipermail/criu/2018-June/041504.html
Link: https://lore.kernel.org/r/20191112012724.250792-4-dima@arista.com
|
|
Commit 96a2b03f281d ("mm, debug_pagelloc: use static keys to enable
debugging") has introduced a static key to reduce overhead when
debug_pagealloc is compiled in but not enabled. It relied on the
assumption that jump_label_init() is called before parse_early_param()
as in start_kernel(), so when the "debug_pagealloc=on" option is parsed,
it is safe to enable the static key.
However, it turns out multiple architectures call parse_early_param()
earlier from their setup_arch(). x86 also calls jump_label_init() even
earlier, so no issue was found while testing the commit, but same is not
true for e.g. ppc64 and s390 where the kernel would not boot with
debug_pagealloc=on as found by our QA.
To fix this without tricky changes to init code of multiple
architectures, this patch partially reverts the static key conversion
from 96a2b03f281d. Init-time and non-fastpath calls (such as in arch
code) of debug_pagealloc_enabled() will again test a simple bool
variable. Fastpath mm code is converted to a new
debug_pagealloc_enabled_static() variant that relies on the static key,
which is enabled in a well-defined point in mm_init() where it's
guaranteed that jump_label_init() has been called, regardless of
architecture.
[sfr@canb.auug.org.au: export _debug_pagealloc_enabled_early]
Link: http://lkml.kernel.org/r/20200106164944.063ac07b@canb.auug.org.au
Link: http://lkml.kernel.org/r/20191219130612.23171-1-vbabka@suse.cz
Fixes: 96a2b03f281d ("mm, debug_pagelloc: use static keys to enable debugging")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Qian Cai <cai@lca.pw>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Since the current kernel command line is too short to describe
long and many options for init (e.g. systemd command line options),
this allows admin to use boot config for init command line.
All init command line under "init." keywords will be passed to
init.
For example,
init.systemd {
unified_cgroup_hierarchy = 1
debug_shell
default_timeout_start_sec = 60
}
Link: http://lkml.kernel.org/r/157867229521.17873.654222294326542349.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Since the current kernel command line is too short to describe
many options which supported by kernel, allow user to use boot
config to setup (add) the command line options.
All kernel parameters under "kernel." keywords will be used
for setting up extra kernel command line.
For example,
kernel {
audit = on
audit_backlog_limit = 256
}
Note that you can not specify some early parameters
(like console etc.) by this method, since it is
loaded after early parameters parsed.
Link: http://lkml.kernel.org/r/157867228333.17873.11962796367032622466.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Since initcall_command_line is used as a temporary buffer,
it could be freed after usage. Allocate it in do_initcall()
and free it after used.
Link: http://lkml.kernel.org/r/157867227145.17873.17513760552008505454.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Load the extended boot config data from the tail of initrd
image. If there is an SKC data there, it has
[(u32)size][(u32)checksum] header (in really, this is a
footer) at the end of initrd. If the checksum (simple sum
of bytes) is match, this starts parsing it from there.
Link: http://lkml.kernel.org/r/157867222435.17873.9936667353335606867.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Extra Boot Config (XBC) allows admin to pass a tree-structured
boot configuration file when boot up the kernel. This extends
the kernel command line in an efficient way.
Boot config will contain some key-value commands, e.g.
key.word = value1
another.key.word = value2
It can fold same keys with braces, also you can write array
data. For example,
key {
word1 {
setting1 = data
setting2
}
word2.array = "val1", "val2"
}
User can access these key-value pair and tree structure via
SKC APIs.
Link: http://lkml.kernel.org/r/157867221257.17873.1775090991929862549.stgit@devnote2
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
The ungrafting from PRIO bug fixes in net, when merged into net-next,
merge cleanly but create a build failure. The resolution used here is
from Petr Machata.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This reverts commit 8243186f0cc7 ("fs: remove ksys_dup()") and the
subsequent fix for it in commit 2d3145f8d280 ("early init: fix error
handling when opening /dev/console").
Trying to use filp_open() and f_dupfd() instead of pseudo-syscalls
caused more trouble than what is worth it: it requires accessing vfs
internals and it turns out there were other bugs in it too.
In particular, the file reference counting was wrong - because unlike
the original "open+2*dup" sequence it used "filp_open+3*f_dupfd" and
thus had an extra leaked file reference.
That in turn then caused odd problems with Androidx86 long after boot
becaue of how the extra reference to the console kept the session active
even after all file descriptors had been closed.
Reported-by: youling 257 <youling257@gmail.com>
Cc: Arvind Sankar <nivedita@alum.mit.edu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2019-12-27
The following pull-request contains BPF updates for your *net-next* tree.
We've added 127 non-merge commits during the last 17 day(s) which contain
a total of 110 files changed, 6901 insertions(+), 2721 deletions(-).
There are three merge conflicts. Conflicts and resolution looks as follows:
1) Merge conflict in net/bpf/test_run.c:
There was a tree-wide cleanup c593642c8be0 ("treewide: Use sizeof_field() macro")
which gets in the way with b590cb5f802d ("bpf: Switch to offsetofend in
BPF_PROG_TEST_RUN"):
<<<<<<< HEAD
if (!range_is_zero(__skb, offsetof(struct __sk_buff, priority) +
sizeof_field(struct __sk_buff, priority),
=======
if (!range_is_zero(__skb, offsetofend(struct __sk_buff, priority),
>>>>>>> 7c8dce4b166113743adad131b5a24c4acc12f92c
There are a few occasions that look similar to this. Always take the chunk with
offsetofend(). Note that there is one where the fields differ in here:
<<<<<<< HEAD
if (!range_is_zero(__skb, offsetof(struct __sk_buff, tstamp) +
sizeof_field(struct __sk_buff, tstamp),
=======
if (!range_is_zero(__skb, offsetofend(struct __sk_buff, gso_segs),
>>>>>>> 7c8dce4b166113743adad131b5a24c4acc12f92c
Just take the one with offsetofend() /and/ gso_segs. Latter is correct due to
850a88cc4096 ("bpf: Expose __sk_buff wire_len/gso_segs to BPF_PROG_TEST_RUN").
2) Merge conflict in arch/riscv/net/bpf_jit_comp.c:
(I'm keeping Bjorn in Cc here for a double-check in case I got it wrong.)
<<<<<<< HEAD
if (is_13b_check(off, insn))
return -1;
emit(rv_blt(tcc, RV_REG_ZERO, off >> 1), ctx);
=======
emit_branch(BPF_JSLT, RV_REG_T1, RV_REG_ZERO, off, ctx);
>>>>>>> 7c8dce4b166113743adad131b5a24c4acc12f92c
Result should look like:
emit_branch(BPF_JSLT, tcc, RV_REG_ZERO, off, ctx);
3) Merge conflict in arch/riscv/include/asm/pgtable.h:
<<<<<<< HEAD
=======
#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
#define VMALLOC_END (PAGE_OFFSET - 1)
#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
#define BPF_JIT_REGION_SIZE (SZ_128M)
#define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE)
#define BPF_JIT_REGION_END (VMALLOC_END)
/*
* Roughly size the vmemmap space to be large enough to fit enough
* struct pages to map half the virtual address space. Then
* position vmemmap directly below the VMALLOC region.
*/
#define VMEMMAP_SHIFT \
(CONFIG_VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT)
#define VMEMMAP_SIZE BIT(VMEMMAP_SHIFT)
#define VMEMMAP_END (VMALLOC_START - 1)
#define VMEMMAP_START (VMALLOC_START - VMEMMAP_SIZE)
#define vmemmap ((struct page *)VMEMMAP_START)
>>>>>>> 7c8dce4b166113743adad131b5a24c4acc12f92c
Only take the BPF_* defines from there and move them higher up in the
same file. Remove the rest from the chunk. The VMALLOC_* etc defines
got moved via 01f52e16b868 ("riscv: define vmemmap before pfn_to_page
calls"). Result:
[...]
#define __S101 PAGE_READ_EXEC
#define __S110 PAGE_SHARED_EXEC
#define __S111 PAGE_SHARED_EXEC
#define VMALLOC_SIZE (KERN_VIRT_SIZE >> 1)
#define VMALLOC_END (PAGE_OFFSET - 1)
#define VMALLOC_START (PAGE_OFFSET - VMALLOC_SIZE)
#define BPF_JIT_REGION_SIZE (SZ_128M)
#define BPF_JIT_REGION_START (PAGE_OFFSET - BPF_JIT_REGION_SIZE)
#define BPF_JIT_REGION_END (VMALLOC_END)
/*
* Roughly size the vmemmap space to be large enough to fit enough
* struct pages to map half the virtual address space. Then
* position vmemmap directly below the VMALLOC region.
*/
#define VMEMMAP_SHIFT \
(CONFIG_VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT)
#define VMEMMAP_SIZE BIT(VMEMMAP_SHIFT)
#define VMEMMAP_END (VMALLOC_START - 1)
#define VMEMMAP_START (VMALLOC_START - VMEMMAP_SIZE)
[...]
Let me know if there are any other issues.
Anyway, the main changes are:
1) Extend bpftool to produce a struct (aka "skeleton") tailored and specific
to a provided BPF object file. This provides an alternative, simplified API
compared to standard libbpf interaction. Also, add libbpf extern variable
resolution for .kconfig section to import Kconfig data, from Andrii Nakryiko.
2) Add BPF dispatcher for XDP which is a mechanism to avoid indirect calls by
generating a branch funnel as discussed back in bpfconf'19 at LSF/MM. Also,
add various BPF riscv JIT improvements, from Björn Töpel.
3) Extend bpftool to allow matching BPF programs and maps by name,
from Paul Chaignon.
4) Support for replacing cgroup BPF programs attached with BPF_F_ALLOW_MULTI
flag for allowing updates without service interruption, from Andrey Ignatov.
5) Cleanup and simplification of ring access functions for AF_XDP with a
bonus of 0-5% performance improvement, from Magnus Karlsson.
6) Enable BPF JITs for x86-64 and arm64 by default. Also, final version of
audit support for BPF, from Daniel Borkmann and latter with Jiri Olsa.
7) Move and extend test_select_reuseport into BPF program tests under
BPF selftests, from Jakub Sitnicki.
8) Various BPF sample improvements for xdpsock for customizing parameters
to set up and benchmark AF_XDP, from Jay Jayatheerthan.
9) Improve libbpf to provide a ulimit hint on permission denied errors.
Also change XDP sample programs to attach in driver mode by default,
from Toke Høiland-Jørgensen.
10) Extend BPF test infrastructure to allow changing skb mark from tc BPF
programs, from Nikita V. Shirokov.
11) Optimize prologue code sequence in BPF arm32 JIT, from Russell King.
12) Fix xdp_redirect_cpu BPF sample to manually attach to tracepoints after
libbpf conversion, from Jesper Dangaard Brouer.
13) Minor misc improvements from various others.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The comment says "this should never fail", but it definitely can fail
when you have odd initial boot filesystems, or kernel configurations.
So get the error handling right: filp_open() returns an error pointer.
Reported-by: Jesse Barnes <jsbarnes@google.com>
Reported-by: youling 257 <youling257@gmail.com>
Fixes: 8243186f0cc7 ("fs: remove ksys_dup()")
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The "trivial conversion" in commit cccaa5e33525 ("init: use do_mount()
instead of ksys_mount()") was totally broken, since it didn't handle the
case of a NULL mount data pointer. And while I had "tested" it (and
presumably Dominik had too) that bug was hidden by me having options.
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Reported-by: Ondřej Jirman <megi@xff.cz>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-and-tested-by: Borislav Petkov <bp@suse.de>
Tested-by: Chris Clayton <chris2553@googlemail.com>
Tested-by: Eric Biggers <ebiggers@kernel.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
device.h has everything and the kitchen sink when it comes to struct
device things, so split out the struct driver things things to a
separate .h file to make things easier to maintain and manage over time.
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20191209193303.1694546-7-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use a more generic name for additional table sorting usecases,
such as the upcoming ORC table sorting feature. This tool is
not tied to exception table sorting anymore.
No functional changes intended.
[ mingo: Rewrote the changelog. ]
Signed-off-by: Shile Zhang <shile.zhang@linux.alibaba.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: linux-kbuild@vger.kernel.org
Link: https://lkml.kernel.org/r/20191204004633.88660-6-shile.zhang@linux.alibaba.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
ksys_dup() is used only at one place in the kernel, namely to duplicate
fd 0 of /dev/console to stdout and stderr. The same functionality can be
achieved by using functions already available within the kernel namespace.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
|
|
Merge the two instances where /dev/console is opened as
stdin/stdout/stderr.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
|
|
In prepare_namespace(), do_mount() can be used instead of ksys_mount()
as the first and third argument are const strings in the kernel, the
second and fourth argument are passed through anyway, and the fifth
argument is NULL.
In do_mount_root(), ksys_mount() is called with the first and third
argument being already kernelspace strings, which do not need to be
copied over from userspace to kernelspace (again). The second and
fourth arguments are passed through to do_mount() anyway. The fifth
argument, while already residing in kernelspace, needs to be put into
a page of its own. Then, do_mount() can be used instead of
ksys_mount().
Once this is done, there are no in-kernel users to ksys_mount() left,
which can therefore be removed.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
|
|
All three calls to ksys_mount() in initrd-related kernel code can
be switched over to do_mount():
- the first and third arguments are const strings in the kernel,
and do not need to be copied over from userspace;
- the fifth argument is NULL, and therefore no page needs to be,
copied over from userspace;
- the second and fourth argument are passed through anyway.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
|
|
In devtmpfs, do_mount() can be called directly instead of complex wrapping
by ksys_mount():
- the first and third arguments are const strings in the kernel,
and do not need to be copied over from userspace;
- the fifth argument is NULL, and therefore no page needs to be
copied over from userspace;
- the second and fourth argument are passed through anyway.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
|
|
After Spectre 2 fix via 290af86629b2 ("bpf: introduce BPF_JIT_ALWAYS_ON
config") most major distros use BPF_JIT_ALWAYS_ON configuration these days
which compiles out the BPF interpreter entirely and always enables the
JIT. Also given recent fix in e1608f3fa857 ("bpf: Avoid setting bpf insns
pages read-only when prog is jited"), we additionally avoid fragmenting
the direct map for the BPF insns pages sitting in the general data heap
since they are not used during execution. Latter is only needed when run
through the interpreter.
Since both x86 and arm64 JITs have seen a lot of exposure over the years,
are generally most up to date and maintained, there is more downside in
!BPF_JIT_ALWAYS_ON configurations to have the interpreter enabled by default
rather than the JIT. Add a ARCH_WANT_DEFAULT_BPF_JIT config which archs can
use to set the bpf_jit_{enable,kallsyms} to 1. Back in the days the
bpf_jit_kallsyms knob was set to 0 by default since major distros still
had /proc/kallsyms addresses exposed to unprivileged user space which is
not the case anymore. Hence both knobs are set via BPF_JIT_DEFAULT_ON which
is set to 'y' in case of BPF_JIT_ALWAYS_ON or ARCH_WANT_DEFAULT_BPF_JIT.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/f78ad24795c2966efcc2ee19025fa3459f622185.1575903816.git.daniel@iogearbox.net
|
|
Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ / /' -i */Kconfig
Link: http://lkml.kernel.org/r/1574306670-30234-1-git-send-email-krzk@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Jiri Kosina <trivial@kernel.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- remove unneeded asm headers from hexagon, ia64
- add 'dir-pkg' target, which works like 'tar-pkg' but skips archiving
- add 'helpnewconfig' target, which shows help for new CONFIG options
- support 'make nsdeps' for external modules
- make rebuilds faster by deleting $(wildcard $^) checks
- remove compile tests for kernel-space headers
- refactor modpost to simplify modversion handling
- make single target builds faster
- optimize and clean up scripts/kallsyms.c
- refactor various Makefiles and scripts
* tag 'kbuild-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (59 commits)
MAINTAINERS: update Kbuild/Kconfig maintainer's email address
scripts/kallsyms: remove redundant initializers
scripts/kallsyms: put check_symbol_range() calls close together
scripts/kallsyms: make check_symbol_range() void function
scripts/kallsyms: move ignored symbol types to is_ignored_symbol()
scripts/kallsyms: move more patterns to the ignored_prefixes array
scripts/kallsyms: skip ignored symbols very early
scripts/kallsyms: add const qualifiers where possible
scripts/kallsyms: make find_token() return (unsigned char *)
scripts/kallsyms: replace prefix_underscores_count() with strspn()
scripts/kallsyms: add sym_name() to mitigate cast ugliness
scripts/kallsyms: remove unneeded length check for prefix matching
scripts/kallsyms: remove redundant is_arm_mapping_symbol()
scripts/kallsyms: set relative_base more effectively
scripts/kallsyms: shrink table before sorting it
scripts/kallsyms: fix definitely-lost memory leak
scripts/kallsyms: remove unneeded #ifndef ARRAY_SIZE
kbuild: make single target builds even faster
modpost: respect the previous export when 'exported twice' is warned
modpost: do not set ->preloaded for symbols from Module.symvers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull sysctl system call removal from Eric Biederman:
"As far as I can tell we have reached the point where no one enables
the sysctl system call anymore. It still is enabled in a few
defconfigs but they are mostly the rarely used one and in asking
people about that it was more cut & paste enabled than anything else.
This is single commit that just deletes code. Leaving just enough code
so that the deprecated sysctl warning continues to be printed. If my
analysis turns out to be wrong and someone actually cares it will be
easy to revert this commit and have the system call again.
There was one new xtensa defconfig in linux-next that enabled the
system call this cycle and when asked about it the maintainer of the
code replied that it was not enabled on purpose. As of today's
linux-next tree that defconfig no longer enables the system call.
What we saw in the review discussion was that if we go a step farther
than my patch and mess with uapi headers there are pieces of code that
won't compile, but nothing minds the system call actually disappearing
from the kernel"
Link: https://lore.kernel.org/lkml/201910011140.EA0181F13@keescook/
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
sysctl: Remove the sysctl system call
|
|
This system call has been deprecated almost since it was introduced, and
in a survey of the linux distributions I can no longer find any of them
that enable CONFIG_SYSCTL_SYSCALL. The only indication that I can find
that anyone might care is that a few of the defconfigs in the kernel
enable CONFIG_SYSCTL_SYSCALL. However this appears in only 31 of 414
defconfigs in the kernel, so I suspect this symbols presence is simply
because it is harmless to include rather than because it is necessary.
As there appear to be no users of the sysctl system call, remove the
code. As this removes one of the few uses of the internal kernel mount
of proc I hope this allows for even more simplifications of the proc
filesystem.
Cc: Alex Smith <alex.smith@imgtec.com>
Cc: Anders Berg <anders.berg@lsi.com>
Cc: Apelete Seketeli <apelete@seketeli.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Chee Nouk Phoon <cnphoon@altera.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Christian Ruppert <christian.ruppert@abilis.com>
Cc: Greg Ungerer <gerg@uclinux.org>
Cc: Harvey Hunt <harvey.hunt@imgtec.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Hongliang Tao <taohl@lemote.com>
Cc: Hua Yan <yanh@lemote.com>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: John Crispin <blogic@openwrt.org>
Cc: Jonas Jensen <jonas.jensen@gmail.com>
Cc: Josh Boyer <jwboyer@gmail.com>
Cc: Jun Nie <jun.nie@linaro.org>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Kevin Wells <kevin.wells@nxp.com>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Noam Camus <noamc@ezchip.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Phil Edworthy <phil.edworthy@renesas.com>
Cc: Pierrick Hascoet <pierrick.hascoet@abilis.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Roland Stigge <stigge@antcom.de>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Scott Telford <stelford@cadence.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Steven J. Hill <Steven.Hill@imgtec.com>
Cc: Tanmay Inamdar <tinamdar@apm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
