summaryrefslogtreecommitdiff
path: root/include/linux/dma-buf.h
AgeCommit message (Collapse)AuthorFilesLines
2022-10-18dma-buf: Remove obsoleted internal lockDmitry Osipenko1-9/+0
The internal dma-buf lock isn't needed anymore because the updated locking specification claims that dma-buf reservation must be locked by importers, and thus, the internal data is already protected by the reservation lock. Remove the obsoleted internal lock. Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221017172229.42269-22-dmitry.osipenko@collabora.com
2022-10-18dma-buf: Add unlocked variant of attachment-mapping functionsDmitry Osipenko1-0/+6
Add unlocked variant of dma_buf_map/unmap_attachment() that will be used by drivers that don't take the reservation lock explicitly. Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221017172229.42269-3-dmitry.osipenko@collabora.com
2022-10-18dma-buf: Add unlocked variant of vmapping functionsDmitry Osipenko1-0/+2
Add unlocked variant of dma_buf_vmap/vunmap() that will be utilized by drivers that don't take the reservation lock explicitly. Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221017172229.42269-2-dmitry.osipenko@collabora.com
2022-04-07dma-buf: specify usage while adding fences to dma_resv obj v7Christian König1-8/+8
Instead of distingting between shared and exclusive fences specify the fence usage while adding fences. Rework all drivers to use this interface instead and deprecate the old one. v2: some kerneldoc comments suggested by Daniel v3: fix a missing case in radeon v4: rebase on nouveau changes, fix lockdep and temporary disable warning v5: more documentation updates v6: separate internal dma_resv changes from this patch, avoids to disable warning temporary, rebase on upstream changes v7: fix missed case in lima driver, minimize changes to i915_gem_busy_ioctl Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220407085946.744568-3-christian.koenig@amd.com
2022-04-07dma-buf: add enum dma_resv_usage v4Christian König1-2/+6
This change adds the dma_resv_usage enum and allows us to specify why a dma_resv object is queried for its containing fences. Additional to that a dma_resv_usage_rw() helper function is added to aid retrieving the fences for a read or write userspace submission. This is then deployed to the different query functions of the dma_resv object and all of their users. When the write paratermer was previously true we now use DMA_RESV_USAGE_WRITE and DMA_RESV_USAGE_READ otherwise. v2: add KERNEL/OTHER in separate patch v3: some kerneldoc suggestions by Daniel v4: some more kerneldoc suggestions by Daniel, fix missing cases lost in the rebase pointed out by Bas. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220407085946.744568-2-christian.koenig@amd.com
2022-04-05Merge drm/drm-next into drm-misc-nextMaxime Ripard1-6/+6
Let's start the 5.19 development cycle. Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-04-01dma-buf: drop the DAG approach for the dma_resv object v3Christian König1-3/+1
So far we had the approach of using a directed acyclic graph with the dma_resv obj. This turned out to have many downsides, especially it means that every single driver and user of this interface needs to be aware of this restriction when adding fences. If the rules for the DAG are not followed then we end up with potential hard to debug memory corruption, information leaks or even elephant big security holes because we allow userspace to access freed up memory. Since we already took a step back from that by always looking at all fences we now go a step further and stop dropping the shared fences when a new exclusive one is added. v2: Drop some now superflous documentation v3: Add some more documentation for the new handling. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20220321135856.1331-11-christian.koenig@amd.com
2022-02-07dma-buf-map: Rename to iosys-mapLucas De Marchi1-6/+6
Rename struct dma_buf_map to struct iosys_map and corresponding APIs. Over time dma-buf-map grew up to more functionality than the one used by dma-buf: in fact it's just a shim layer to abstract system memory, that can be accessed via regular load and store, from IO memory that needs to be acessed via arch helpers. The idea is to extend this API so it can fulfill other needs, internal to a single driver. Example: in the i915 driver it's desired to share the implementation for integrated graphics, which uses mostly system memory, with discrete graphics, which may need to access IO memory. The conversion was mostly done with the following semantic patch: @r1@ @@ - struct dma_buf_map + struct iosys_map @r2@ @@ ( - DMA_BUF_MAP_INIT_VADDR + IOSYS_MAP_INIT_VADDR | - dma_buf_map_set_vaddr + iosys_map_set_vaddr | - dma_buf_map_set_vaddr_iomem + iosys_map_set_vaddr_iomem | - dma_buf_map_is_equal + iosys_map_is_equal | - dma_buf_map_is_null + iosys_map_is_null | - dma_buf_map_is_set + iosys_map_is_set | - dma_buf_map_clear + iosys_map_clear | - dma_buf_map_memcpy_to + iosys_map_memcpy_to | - dma_buf_map_incr + iosys_map_incr ) @@ @@ - #include <linux/dma-buf-map.h> + #include <linux/iosys-map.h> Then some files had their includes adjusted and some comments were update to remove mentions to dma-buf-map. Since this is not specific to dma-buf anymore, move the documentation to the "Bus-Independent Device Accesses" section. v2: - Squash patches v3: - Fix wrong removal of dma-buf.h from MAINTAINERS - Move documentation from dma-buf.rst to device-io.rst v4: - Change documentation title and level Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220204170541.829227-1-lucas.demarchi@intel.com
2021-11-18Merge drm/drm-next into drm-misc-nextdrm-misc-next-2021-11-18Thomas Zimmermann1-2/+2
Backmerging from drm/drm-next for v5.16-rc1. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2021-11-03Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds1-2/+2
Pull rdma updates from Jason Gunthorpe: "A typical collection of patches this cycle, mostly fixing with a few new features: - Fixes from static tools. clang warnings, dead code, unused variable, coccinelle sweeps, etc - Driver bug fixes and minor improvements in rxe, bnxt_re, hfi1, mlx5, irdma, qedr - rtrs ULP bug fixes an improvments - Additional counters for bnxt_re - Support verbs CQ notifications in EFA - Continued reworking and fixing of rxe - netlink control to enable/disable optional device counters - rxe now can use AH objects for its UD path, fixing various bugs in the process - Add DMABUF support to EFA" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (103 commits) RDMA/core: Require the driver to set the IOVA correctly during rereg_mr RDMA/bnxt_re: Remove unsupported bnxt_re_modify_ah callback RDMA/irdma: optimize rx path by removing unnecessary copy RDMA/qed: Use helper function to set GUIDs RDMA/hns: Use the core code to manage the fixed mmap entries IB/opa_vnic: Rebranding of OPA VNIC driver to Cornelis Networks IB/qib: Rebranding of qib driver to Cornelis Networks IB/hfi1: Rebranding of hfi1 driver to Cornelis Networks RDMA/bnxt_re: Use helper function to set GUIDs RDMA/bnxt_re: Fix kernel panic when trying to access bnxt_re_stat_descs RDMA/qedr: Fix NULL deref for query_qp on the GSI QP RDMA/hns: Modify the value of MAX_LP_MSG_LEN to meet hardware compatibility RDMA/hns: Fix initial arm_st of CQ RDMA/rxe: Make rxe_type_info static const RDMA/rxe: Use 'bitmap_zalloc()' when applicable RDMA/rxe: Save a few bytes from struct rxe_pool RDMA/irdma: Remove the unused variable local_qp RDMA/core: Fix missed initialization of rdma_hw_stats::lock RDMA/efa: Add support for dmabuf memory regions RDMA/umem: Allow pinned dmabuf umem usage ...
2021-10-27dma-buf: Fix pin callback commentGal Pressman1-2/+2
The pin callback does not necessarily have to move the memory to system memory, remove the sentence from the comment. Link: https://lore.kernel.org/r/20211012120903.96933-2-galpress@amazon.com Signed-off-by: Gal Pressman <galpress@amazon.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-10-22dma-buf: fix kerneldoc for renamed membersChristian König1-2/+2
Those members where renamed, update the kerneldoc as well. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20211021141945.84023-1-christian.koenig@amd.com
2021-10-01dma-buf: fix and rework dma_buf_poll v7Christian König1-1/+1
Daniel pointed me towards this function and there are multiple obvious problems in the implementation. First of all the retry loop is not working as intended. In general the retry makes only sense if you grab the reference first and then check the sequence values. Then we should always also wait for the exclusive fence. It's also good practice to keep the reference around when installing callbacks to fences you don't own. And last the whole implementation was unnecessary complex and rather hard to understand which could lead to probably unexpected behavior of the IOCTL. Fix all this by reworking the implementation from scratch. Dropping the whole RCU approach and taking the lock instead. Only mildly tested and needs a thoughtful review of the code. Pushing through drm-misc-next to avoid merge conflicts and give the code another round of testing. v2: fix the reference counting as well v3: keep the excl fence handling as is for stable v4: back to testing all fences, drop RCU v5: handle in and out separately v6: add missing clear of events v7: change coding style as suggested by Michel, drop unused variables Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Tested-by: Michel Dänzer <mdaenzer@redhat.com> CC: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20210720131110.88512-1-christian.koenig@amd.com
2021-08-30dma-resv: Give the docs a do-overDaniel Vetter1-0/+7
Specifically document the new/clarified rules around how the shared fences do not have any ordering requirements against the exclusive fence. But also document all the things a bit better, given how central struct dma_resv to dynamic buffer management the docs have been very inadequat. - Lots more links to other pieces of the puzzle. Unfortunately ttm_buffer_object has no docs, so no links :-( - Explain/complain a bit about dma_resv_locking_ctx(). I still don't like that one, but fixing the ttm call chains is going to be horrible. Plus we want to plug in real slowpath locking when we do that anyway. - Main part of the patch is some actual docs for struct dma_resv. Overall I think we still have a lot of bad naming in this area (e.g. dma_resv.fence is singular, but contains the multiple shared fences), but I think that's more indicative of how the semantics and rules are just not great. Another thing that's real awkard is how chaining exclusive fences right now means direct dma_resv.exclusive_fence pointer access with an rcu_assign_pointer. Not so great either. v2: - Fix a pile of typos (Matt, Jason) - Hammer it in that breaking the rules leads to use-after-free issues around dma-buf sharing (Christian) Reviewed-by: Christian König <christian.koenig@amd.com> Cc: Jason Ekstrand <jason@jlekstrand.net> Cc: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Link: https://patchwork.freedesktop.org/patch/msgid/20210805104705.862416-21-daniel.vetter@ffwll.ch
2021-08-10dma-buf: Fix a few typos in dma-buf documentationGal Pressman1-5/+5
Fix a few typos in the documentation: - Remove an extraneous 'or' - 'unpins' -> 'unpin' - 'braket' -> 'bracket' - 'mappinsg' -> 'mappings' - 'fullfills' -> 'fulfills' Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Gal Pressman <galpress@amazon.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210809122247.15869-1-galpress@amazon.com
2021-07-20dma-buf: Delete the DMA-BUF attachment sysfs statisticsHridya Valsaraju1-17/+0
The DMA-BUF attachment statistics form a subset of the DMA-BUF sysfs statistics that recently merged to the drm-misc tree. They are not UABI yet since they have not merged to the upstream Linux kernel. Since there has been a reported a performance regression due to the overhead of sysfs directory creation/teardown during dma_buf_attach()/dma_buf_detach(), this patch deletes the DMA-BUF attachment statistics from sysfs. Fixes: bdb8d06dfefd ("dmabuf: Add the capability to expose DMA-BUF stats in sysfs") Signed-off-by: Hridya Valsaraju <hridya@google.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210713040742.2680135-1-hridya@google.com Signed-off-by: Christian König <christian.koenig@amd.com>
2021-06-24dma-buf: Document dma-buf implicit fencing/resv fencing rulesDaniel Vetter1-0/+34
Docs for struct dma_resv are fairly clear: "A reservation object can have attached one exclusive fence (normally associated with write operations) or N shared fences (read operations)." https://dri.freedesktop.org/docs/drm/driver-api/dma-buf.html#reservation-objects Furthermore a review across all of upstream. First of render drivers and how they set implicit fences: - nouveau follows this contract, see in validate_fini_no_ticket() nouveau_bo_fence(nvbo, fence, !!b->write_domains); and that last boolean controls whether the exclusive or shared fence slot is used. - radeon follows this contract by setting p->relocs[i].tv.num_shared = !r->write_domain; in radeon_cs_parser_relocs(), which ensures that the call to ttm_eu_fence_buffer_objects() in radeon_cs_parser_fini() will do the right thing. - vmwgfx seems to follow this contract with the shotgun approach of always setting ttm_val_buf->num_shared = 0, which means ttm_eu_fence_buffer_objects() will only use the exclusive slot. - etnaviv follows this contract, as can be trivially seen by looking at submit_attach_object_fences() - i915 is a bit a convoluted maze with multiple paths leading to i915_vma_move_to_active(). Which sets the exclusive flag if EXEC_OBJECT_WRITE is set. This can either come as a buffer flag for softpin mode, or through the write_domain when using relocations. It follows this contract. - lima follows this contract, see lima_gem_submit() which sets the exclusive fence when the LIMA_SUBMIT_BO_WRITE flag is set for that bo - msm follows this contract, see msm_gpu_submit() which sets the exclusive flag when the MSM_SUBMIT_BO_WRITE is set for that buffer - panfrost follows this contract with the shotgun approach of just always setting the exclusive fence, see panfrost_attach_object_fences(). Benefits of a single engine I guess - v3d follows this contract with the same shotgun approach in v3d_attach_fences_and_unlock_reservation(), but it has at least an XXX comment that maybe this should be improved - v4c uses the same shotgun approach of always setting an exclusive fence, see vc4_update_bo_seqnos() - vgem also follows this contract, see vgem_fence_attach_ioctl() and the VGEM_FENCE_WRITE. This is used in some igts to validate prime sharing with i915.ko without the need of a 2nd gpu - vritio follows this contract again with the shotgun approach of always setting an exclusive fence, see virtio_gpu_array_add_fence() This covers the setting of the exclusive fences when writing. Synchronizing against the exclusive fence is a lot more tricky, and I only spot checked a few: - i915 does it, with the optional EXEC_OBJECT_ASYNC to skip all implicit dependencies (which is used by vulkan) - etnaviv does this. Implicit dependencies are collected in submit_fence_sync(), again with an opt-out flag ETNA_SUBMIT_NO_IMPLICIT. These are then picked up in etnaviv_sched_dependency which is the drm_sched_backend_ops->dependency callback. - v4c seems to not do much here, maybe gets away with it by not having a scheduler and only a single engine. Since all newer broadcom chips than the OG vc4 use v3d for rendering, which follows this contract, the impact of this issue is fairly small. - v3d does this using the drm_gem_fence_array_add_implicit() helper, which then it's drm_sched_backend_ops->dependency callback v3d_job_dependency() picks up. - panfrost is nice here and tracks the implicit fences in panfrost_job->implicit_fences, which again the drm_sched_backend_ops->dependency callback panfrost_job_dependency() picks up. It is mildly questionable though since it only picks up exclusive fences in panfrost_acquire_object_fences(), but not buggy in practice because it also always sets the exclusive fence. It should pick up both sets of fences, just in case there's ever going to be a 2nd gpu in a SoC with a mali gpu. Or maybe a mali SoC with a pcie port and a real gpu, which might actually happen eventually. A bug, but easy to fix. Should probably use the drm_gem_fence_array_add_implicit() helper. - lima is nice an easy, uses drm_gem_fence_array_add_implicit() and the same schema as v3d. - msm is mildly entertaining. It also supports MSM_SUBMIT_NO_IMPLICIT, but because it doesn't use the drm/scheduler it handles fences from the wrong context with a synchronous dma_fence_wait. See submit_fence_sync() leading to msm_gem_sync_object(). Investing into a scheduler might be a good idea. - all the remaining drivers are ttm based, where I hope they do appropriately obey implicit fences already. I didn't do the full audit there because a) not follow the contract would confuse ttm quite well and b) reading non-standard scheduler and submit code which isn't based on drm/scheduler is a pain. Onwards to the display side. - Any driver using the drm_gem_plane_helper_prepare_fb() helper will correctly. Overwhelmingly most drivers get this right, except a few totally dont. I'll follow up with a patch to make this the default and avoid a bunch of bugs. - I didn't audit the ttm drivers, but given that dma_resv started there I hope they get this right. In conclusion this IS the contract, both as documented and overwhelmingly implemented, specically as implemented by all render drivers except amdgpu. Amdgpu tried to fix this already in commit 049aca4363d8af87cab8d53de5401602db3b9999 Author: Christian König <christian.koenig@amd.com> Date: Wed Sep 19 16:54:35 2018 +0200 drm/amdgpu: fix using shared fence for exported BOs v2 but this fix falls short on a number of areas: - It's racy, by the time the buffer is shared it might be too late. To make sure there's definitely never a problem we need to set the fences correctly for any buffer that's potentially exportable. - It's breaking uapi, dma-buf fds support poll() and differentitiate between, which was introduced in commit 9b495a5887994a6d74d5c261d012083a92b94738 Author: Maarten Lankhorst <maarten.lankhorst@canonical.com> Date: Tue Jul 1 12:57:43 2014 +0200 dma-buf: add poll support, v3 - Christian König wants to nack new uapi building further on this dma_resv contract because it breaks amdgpu, quoting "Yeah, and that is exactly the reason why I will NAK this uAPI change. "This doesn't works for amdgpu at all for the reasons outlined above." https://lore.kernel.org/dri-devel/f2eb6751-2f82-9b23-f57e-548de5b729de@gmail.com/ Rejecting new development because your own driver is broken and violates established cross driver contracts and uapi is really not how upstream works. Now this patch will have a severe performance impact on anything that runs on multiple engines. So we can't just merge it outright, but need a bit a plan: - amdgpu needs a proper uapi for handling implicit fencing. The funny thing is that to do it correctly, implicit fencing must be treated as a very strange IPC mechanism for transporting fences, where both setting the fence and dependency intercepts must be handled explicitly. Current best practices is a per-bo flag to indicate writes, and a per-bo flag to to skip implicit fencing in the CS ioctl as a new chunk. - Since amdgpu has been shipping with broken behaviour we need an opt-out flag from the butchered implicit fencing model to enable the proper explicit implicit fencing model. - for kernel memory fences due to bo moves at least the i915 idea is to use ttm_bo->moving. amdgpu probably needs the same. - since the current p2p dma-buf interface assumes the kernel memory fence is in the exclusive dma_resv fence slot we need to add a new fence slot for kernel fences, which must never be ignored. Since currently only amdgpu supports this there's no real problem here yet, until amdgpu gains a NO_IMPLICIT CS flag. - New userspace needs to ship in enough desktop distros so that users wont notice the perf impact. I think we can ignore LTS distros who upgrade their kernels but not their mesa3d snapshot. - Then when this is all in place we can merge this patch here. What is not a solution to this problem here is trying to make the dma_resv rules in the kernel more clever. The fundamental issue here is that the amdgpu CS uapi is the least expressive one across all drivers (only equalled by panfrost, which has an actual excuse) by not allowing any userspace control over how implicit sync is conducted. Until this is fixed it's completely pointless to make the kernel more clever to improve amdgpu, because all we're doing is papering over this uapi design issue. amdgpu needs to attain the status quo established by other drivers first, once that's achieved we can tackle the remaining issues in a consistent way across drivers. v2: Bas pointed me at AMDGPU_GEM_CREATE_EXPLICIT_SYNC, which I entirely missed. This is great because it means the amdgpu specific piece for proper implicit fence handling exists already, and that since a while. The only thing that's now missing is - fishing the implicit fences out of a shared object at the right time - setting the exclusive implicit fence slot at the right time. Jason has a patch series to fill that gap with a bunch of generic ioctl on the dma-buf fd: https://lore.kernel.org/dri-devel/20210520190007.534046-1-jason@jlekstrand.net/ v3: Since Christian has fixed amdgpu now in commit 8c505bdc9c8b955223b054e34a0be9c3d841cd20 (drm-misc/drm-misc-next) Author: Christian König <christian.koenig@amd.com> Date: Wed Jun 9 13:51:36 2021 +0200 drm/amdgpu: rework dma_resv handling v3 Use the audit covered in this commit message as the excuse to update the dma-buf docs around dma_buf.resv usage across drivers. Since dynamic importers have different rules also hammer these in again while we're at it. v4: - Add the missing "through the device" in the dynamic section that I overlooked. - Fix a kerneldoc markup mistake, the link didn't connect v5: - A few s/should/must/ to make clear what must be done (if the driver does implicit sync) and what's more a maybe (Daniel Stone) - drop all the example api discussion, that needs to be expanded, clarified and put into a new chapter in drm-uapi.rst (Daniel Stone) Cc: Daniel Stone <daniel@fooishbar.org> Acked-by: Daniel Stone <daniel@fooishbar.org> Reviewed-by: Dave Airlie <airlied@redhat.com> (v4) Reviewed-by: Christian König <christian.koenig@amd.com> (v3) Cc: mesa-dev@lists.freedesktop.org Cc: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Cc: Dave Airlie <airlied@gmail.com> Cc: Rob Clark <robdclark@chromium.org> Cc: Kristian H. Kristensen <hoegsberg@google.com> Cc: Michel Dänzer <michel@daenzer.net> Cc: Daniel Stone <daniels@collabora.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Deepak R Varma <mh12gx2825@gmail.com> Cc: Chen Li <chenli@uniontech.com> Cc: Kevin Wang <kevin1.wang@amd.com> Cc: Dennis Li <Dennis.Li@amd.com> Cc: Luben Tuikov <luben.tuikov@amd.com> Cc: linaro-mm-sig@lists.linaro.org Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210624125246.166721-1-daniel.vetter@ffwll.ch
2021-06-24dma-buf: Switch to inline kerneldocDaniel Vetter1-26/+90
Also review & update everything while we're at it. This is prep work to smash a ton of stuff into the kerneldoc for @resv. v2: Move the doc for sysfs_entry.attachment_uid to the right place too (Sam) Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Christian König <christian.koenig@amd.com> Cc: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@redhat.com> Cc: Nirmoy Das <nirmoy.das@amd.com> Cc: Deepak R Varma <mh12gx2825@gmail.com> Cc: Chen Li <chenli@uniontech.com> Cc: Kevin Wang <kevin1.wang@amd.com> Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Link: https://patchwork.freedesktop.org/patch/msgid/20210623161712.3370885-1-daniel.vetter@ffwll.ch
2021-06-22dma-buf: Document non-dynamic exporter expectations betterDaniel Vetter1-0/+15
Christian and me realized we have a pretty massive disconnect about different interpretations of what dma_resv is used for by different drivers. The discussion is much, much bigger than this change here, but this is an important one: Non-dynamic exporters must guarantee that the memory they return is ready for use. They cannot expect importers to wait for the exclusive fence. Only dynamic importers are required to obey the dma_resv fences strictly (and more patches are needed to define exactly what this means). Christian has patches to update nouvea, radeon and amdgpu. The only other driver using both ttm and supporting dma-buf export is qxl, which only uses synchronous ttm_bo_move. v2: To hammer this in document that dynamic importers _must_ wait for the exclusive fence after having called dma_buf_map_attachment. Reviewed-by: Christian König <christian.koenig@amd.com> Cc: Christian König <ckoenig.leichtzumerken@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210621151758.2347474-1-daniel.vetter@ffwll.ch
2021-06-15dmabuf: Add the capability to expose DMA-BUF stats in sysfsHridya Valsaraju1-0/+20
Overview ======== The patch adds DMA-BUF statistics to /sys/kernel/dmabuf/buffers. It allows statistics to be enabled for each DMA-BUF in sysfs by enabling the config CONFIG_DMABUF_SYSFS_STATS. The following stats will be exposed by the interface: /sys/kernel/dmabuf/buffers/<inode_number>/exporter_name /sys/kernel/dmabuf/buffers/<inode_number>/size /sys/kernel/dmabuf/buffers/<inode_number>/attachments/<attach_uid>/device /sys/kernel/dmabuf/buffers/<inode_number>/attachments/<attach_uid>/map_counter The inode_number is unique for each DMA-BUF and was added earlier [1] in order to allow userspace to track DMA-BUF usage across different processes. Use Cases ========= The interface provides a way to gather DMA-BUF per-buffer statistics from production devices. These statistics will be used to derive DMA-BUF per-exporter stats and per-device usage stats for Android Bug reports. The corresponding userspace changes can be found at [2]. Telemetry tools will also capture this information(along with other memory metrics) periodically as well as on important events like a foreground app kill (which might have been triggered by Low Memory Killer). It will also contribute to provide a snapshot of the system memory usage on other events such as OOM kills and Application Not Responding events. Background ========== Currently, there are two existing interfaces that provide information about DMA-BUFs. 1) /sys/kernel/debug/dma_buf/bufinfo debugfs is however unsuitable to be mounted in production systems and cannot be considered as an alternative to the sysfs interface being proposed. 2) proc/<pid>/fdinfo/<fd> The proc/<pid>/fdinfo/<fd> files expose information about DMA-BUF fds. However, the existing procfs interfaces can only provide information about the buffers for which processes hold fds or have the buffers mmapped into their address space. Since the procfs interfaces alone cannot provide a full picture of all DMA-BUFs in the system, there is the need for an alternate interface to provide this information on production systems. The patch contains the following major improvements over v1: 1) Each attachment is represented by its own directory to allow creating a symlink to the importing device and to also provide room for future expansion. 2) The number of distinct mappings of each attachment is exposed in a separate file. 3) The per-buffer statistics are now in /sys/kernel/dmabuf/buffers inorder to make the interface expandable in future. All of the improvements above are based on suggestions/feedback from Daniel Vetter and Christian König. A shell script that can be run on a classic Linux environment to read out the DMA-BUF statistics can be found at [3](suggested by John Stultz). [1]: https://lore.kernel.org/patchwork/patch/1088791/ [2]: https://android-review.googlesource.com/q/topic:%22dmabuf-sysfs%22+(status:open%20OR%20status:merged) [3]: https://android-review.googlesource.com/c/platform/system/memory/libmeminfo/+/1549734 Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Hridya Valsaraju <hridya@google.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210603214758.2955251-1-hridya@google.com
2021-01-18dma-buf: Add debug optionDaniel Vetter1-0/+6
We have too many people abusing the struct page they can get at but really shouldn't in importers. Aside from that the backing page might simply not exist (for dynamic p2p mappings) looking at it and using it e.g. for mmap can also wreak the page handling of the exporter completely. Importers really must go through the proper interface like dma_buf_mmap for everything. I'm semi-tempted to enforce this for dynamic importers since those really have no excuse at all to break the rules. Unfortuantely we can't store the right pointers somewhere safe to make sure we oops on something recognizable, so best is to just wrangle them a bit by flipping all the bits. At least on x86 kernel addresses have all their high bits sets and the struct page array is fairly low in the kernel mapping, so flipping all the bits gives us a very high pointer in userspace and hence excellent chances for an invalid dereference. v2: Add a note to the @map_dma_buf hook that exporters shouldn't do fancy caching tricks, which would blow up with this address scrambling trick here (Chris) Enable by default when CONFIG_DMA_API_DEBUG is enabled. v3: Only one copy of the mangle/unmangle code (Christian) v4: #ifdef, not #if (0day) v5: sg_table can also be an ERR_PTR (Chris, Christian) Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Stevens <stevensd@chromium.org> Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Link: https://patchwork.freedesktop.org/patch/msgid/20210115164739.3958206-1-daniel.vetter@ffwll.ch
2020-12-16dma-buf: doc polish for pin/unpindrm-misc-next-2020-12-17Daniel Vetter1-3/+5
Motivated by a discussion with Christian and Thomas: Try to untangle a bit what's relevant for importers and what's relevant for exporters. Also add an assert that really only dynamic importers use the api function, anything else doesn't make sense. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Link: https://patchwork.freedesktop.org/patch/msgid/20201211155843.3348718-4-daniel.vetter@ffwll.ch
2020-12-16dma-buf: some kerneldoc formatting fixesDaniel Vetter1-3/+3
Noticed while reviewing the output. Adds a bunch more links and fixes the function interface quoting. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Link: https://patchwork.freedesktop.org/patch/msgid/20201211155843.3348718-2-daniel.vetter@ffwll.ch
2020-12-16dma-buf: Remove kmap kerneldoc vestigesDaniel Vetter1-16/+9
Also try to clarify a bit when dma_buf_begin/end_cpu_access should be called. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Link: https://patchwork.freedesktop.org/patch/msgid/20201211155843.3348718-1-daniel.vetter@ffwll.ch
2020-11-11dma-buf: Document that dma-buf size is fixedJianxin Xiong1-2/+2
The fact that the size of dma-buf is invariant over the lifetime of the buffer is mentioned in the comment of 'dma_buf_ops.mmap', but is not documented at where the info is defined. Add the missing documentation. Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1605044477-51833-7-git-send-email-jianxin.xiong@intel.com
2020-10-15dma-buf: Clarify that dma-buf sg lists are page alignedJianxin Xiong1-1/+2
The dma-buf API have been used under the assumption that the sg lists returned from dma_buf_map_attachment() are fully page aligned. Lots of stuff can break otherwise all over the place. Clarify this in the documentation and add a check when DMA API debug is enabled. Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1602692161-107096-1-git-send-email-jianxin.xiong@intel.com
2020-09-29dma-buf: Use struct dma_buf_map in dma_buf_vunmap() interfacesThomas Zimmermann1-2/+2
This patch updates dma_buf_vunmap() and dma-buf's vunmap callback to use struct dma_buf_map. The interfaces used to receive a buffer address. This address is now given in an instance of the structure. Users of the functions are updated accordingly. This is only an interface change. It is currently expected that dma-buf memory can be accessed with system memory load/store operations. v2: * include dma-buf-heaps and i915 selftests (kernel test robot) * initialize cma_obj before using it in drm_gem_cma_free_object() (kernel test robot) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Tomasz Figa <tfiga@chromium.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200925115601.23955-4-tzimmermann@suse.de
2020-09-29dma-buf: Use struct dma_buf_map in dma_buf_vmap() interfacesThomas Zimmermann1-3/+3
This patch updates dma_buf_vmap() and dma-buf's vmap callback to use struct dma_buf_map. The interfaces used to return a buffer address. This address now gets stored in an instance of the structure that is given as an additional argument. The functions return an errno code on errors. Users of the functions are updated accordingly. This is only an interface change. It is currently expected that dma-buf memory can be accessed with system memory load/store operations. v3: * update fastrpc driver (kernel test robot) v2: * always clear map parameter in dma_buf_vmap() (Daniel) * include dma-buf-heaps and i915 selftests (kernel test robot) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Tomasz Figa <tfiga@chromium.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200925115601.23955-3-tzimmermann@suse.de
2020-09-29dma-buf: Add struct dma-buf-map for storing struct dma_buf.vaddr_ptrThomas Zimmermann1-1/+2
The new type struct dma_buf_map represents a mapping of dma-buf memory into kernel space. It contains a flag, is_iomem, that signals users to access the mapped memory with I/O operations instead of regular loads and stores. It was assumed that DMA buffer memory can be accessed with regular load and store operations. Some architectures, such as sparc64, require the use of I/O operations to access dma-map buffers that are located in I/O memory. Providing struct dma_buf_map allows drivers to implement this. This was specifically a problem when refreshing the graphics framebuffer on such systems. [1] As the first step, struct dma_buf stores an instance of struct dma_buf_map internally. Afterwards, dma-buf's vmap and vunmap interfaces are be converted. Finally, affected drivers can be fixed. v3: * moved documentation into separate patch * test for NULL pointers with !<ptr> [1] https://lore.kernel.org/dri-devel/20200725191012.GA434957@ravnborg.org/ Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200925115601.23955-2-tzimmermann@suse.de
2020-09-02dma-buf: fix kernel-doc warning in <linux/dma-buf.h>Randy Dunlap1-1/+2
Fix kernel-doc warning in <linux/dma-buf.h>: ../include/linux/dma-buf.h:330: warning: Function parameter or member 'name_lock' not described in 'dma_buf' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Christian König <christian.koenig@amd.com> Cc: linux-media@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/388523/ Signed-off-by: Christian König <christian.koenig@amd.com>
2020-07-10dmabuf: use spinlock to access dmabuf->namedrm-misc-fixes-2020-07-15Charan Teja Kalla1-0/+1
There exists a sleep-while-atomic bug while accessing the dmabuf->name under mutex in the dmabuffs_dname(). This is caused from the SELinux permissions checks on a process where it tries to validate the inherited files from fork() by traversing them through iterate_fd() (which traverse files under spin_lock) and call match_file(security/selinux/hooks.c) where the permission checks happen. This audit information is logged using dump_common_audit_data() where it calls d_path() to get the file path name. If the file check happen on the dmabuf's fd, then it ends up in ->dmabuffs_dname() and use mutex to access dmabuf->name. The flow will be like below: flush_unauthorized_files() iterate_fd() spin_lock() --> Start of the atomic section. match_file() file_has_perm() avc_has_perm() avc_audit() slow_avc_audit() common_lsm_audit() dump_common_audit_data() audit_log_d_path() d_path() dmabuffs_dname() mutex_lock()--> Sleep while atomic. Call trace captured (on 4.19 kernels) is below: ___might_sleep+0x204/0x208 __might_sleep+0x50/0x88 __mutex_lock_common+0x5c/0x1068 __mutex_lock_common+0x5c/0x1068 mutex_lock_nested+0x40/0x50 dmabuffs_dname+0xa0/0x170 d_path+0x84/0x290 audit_log_d_path+0x74/0x130 common_lsm_audit+0x334/0x6e8 slow_avc_audit+0xb8/0xf8 avc_has_perm+0x154/0x218 file_has_perm+0x70/0x180 match_file+0x60/0x78 iterate_fd+0x128/0x168 selinux_bprm_committing_creds+0x178/0x248 security_bprm_committing_creds+0x30/0x48 install_exec_creds+0x1c/0x68 load_elf_binary+0x3a4/0x14e0 search_binary_handler+0xb0/0x1e0 So, use spinlock to access dmabuf->name to avoid sleep-while-atomic. Cc: <stable@vger.kernel.org> [5.3+] Signed-off-by: Charan Teja Kalla <charante@codeaurora.org> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Acked-by: Christian König <christian.koenig@amd.com> [sumits: added comment to spinlock_t definition to avoid warning] Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/a83e7f0d-4e54-9848-4b58-e1acdbe06735@codeaurora.org
2020-06-02Merge tag 'drm-next-2020-06-02' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-0/+10
Pull drm updates from Dave Airlie: "Highlights: - Core DRM had a lot of refactoring around managed drm resources to make drivers simpler. - Intel Tigerlake support is on by default - amdgpu now support p2p PCI buffer sharing and encrypted GPU memory Details: core: - uapi: error out EBUSY when existing master - uapi: rework SET/DROP MASTER permission handling - remove drm_pci.h - drm_pci* are now legacy - introduced managed DRM resources - subclassing support for drm_framebuffer - simple encoder helper - edid improvements - vblank + writeback documentation improved - drm/mm - optimise tree searches - port drivers to use devm_drm_dev_alloc dma-buf: - add flag for p2p buffer support mst: - ACT timeout improvements - remove drm_dp_mst_has_audio - don't use 2nd TX slot - spec recommends against it bridge: - dw-hdmi various improvements - chrontel ch7033 support - fix stack issues with old gcc hdmi: - add unpack function for drm infoframe fbdev: - misc fbdev driver fixes i915: - uapi: global sseu pinning - uapi: OA buffer polling - uapi: remove generated perf code - uapi: per-engine default property values in sysfs - Tigerlake GEN12 enabled. - Lots of gem refactoring - Tigerlake enablement patches - move to drm_device logging - Icelake gamma HW readout - push MST link retrain to hotplug work - bandwidth atomic helpers - ICL fixes - RPS/GT refactoring - Cherryview full-ppgtt support - i915 locking guidelines documented - require linear fb stride to be 512 multiple on gen9 - Tigerlake SAGV support amdgpu: - uapi: encrypted GPU memory handling - uapi: add MEM_SYNC IB flag - p2p dma-buf support - export VRAM dma-bufs - FRU chip access support - RAS/SR-IOV updates - Powerplay locking fixes - VCN DPG (powergating) enablement - GFX10 clockgating fixes - DC fixes - GPU reset fixes - navi SDMA fix - expose FP16 for modesetting - DP 1.4 compliance fixes - gfx10 soft recovery - Improved Critical Thermal Faults handling - resizable BAR on gmc10 amdkfd: - uapi: GWS resource management - track GPU memory per process - report PCI domain in topology radeon: - safe reg list generator fixes nouveau: - HD audio fixes on recent systems - vGPU detection (fail probe if we're on one, for now) - Interlaced mode fixes (mostly avoidance on Turing, which doesn't support it) - SVM improvements/fixes - NVIDIA format modifier support - Misc other fixes. adv7511: - HDMI SPDIF support ast: - allocate crtc state size - fix double assignment - fix suspend bochs: - drop connector register cirrus: - move to tiny drivers. exynos: - fix imported dma-buf mapping - enable runtime PM - fixes and cleanups mediatek: - DPI pin mode swap - config mipi_tx current/impedance lima: - devfreq + cooling device support - task handling improvements - runtime PM support pl111: - vexpress init improvements - fix module auto-load rcar-du: - DT bindings conversion to YAML - Planes zpos sanity check and fix - MAINTAINERS entry for LVDS panel driver mcde: - fix return value mgag200: - use managed config init stm: - read endpoints from DT vboxvideo: - use PCI managed functions - drop WC mtrr vkms: - enable cursor by default rockchip: - afbc support virtio: - various cleanups qxl: - fix cursor notify port hisilicon: - 128-byte stride alignment fix sun4i: - improved format handling" * tag 'drm-next-2020-06-02' of git://anongit.freedesktop.org/drm/drm: (1401 commits) drm/amd/display: Fix potential integer wraparound resulting in a hang drm/amd/display: drop cursor position check in atomic test drm/amdgpu: fix device attribute node create failed with multi gpu drm/nouveau: use correct conflicting framebuffer API drm/vblank: Fix -Wformat compile warnings on some arches drm/amdgpu: Sync with VM root BO when switching VM to CPU update mode drm/amd/display: Handle GPU reset for DC block drm/amdgpu: add apu flags (v2) drm/amd/powerpay: Disable gfxoff when setting manual mode on picasso and raven drm/amdgpu: fix pm sysfs node handling (v2) drm/amdgpu: move gpu_info parsing after common early init drm/amdgpu: move discovery gfx config fetching drm/nouveau/dispnv50: fix runtime pm imbalance on error drm/nouveau: fix runtime pm imbalance on error drm/nouveau: fix runtime pm imbalance on error drm/nouveau/debugfs: fix runtime pm imbalance on error drm/nouveau/nouveau/hmm: fix migrate zero page to GPU drm/nouveau/nouveau/hmm: fix nouveau_dmem_chunk allocations drm/nouveau/kms/nv50-: Share DP SST mode_valid() handling with MST drm/nouveau/kms/nv50-: Move 8BPC limit for MST into nv50_mstc_get_modes() ...
2020-04-30dma-buf: fix documentation build warningsdrm-misc-fixes-2020-04-30Randy Dunlap1-2/+1
Fix documentation warnings in dma-buf.[hc]: ../drivers/dma-buf/dma-buf.c:678: warning: Function parameter or member 'importer_ops' not described in 'dma_buf_dynamic_attach' ../drivers/dma-buf/dma-buf.c:678: warning: Function parameter or member 'importer_priv' not described in 'dma_buf_dynamic_attach' ../include/linux/dma-buf.h:339: warning: Incorrect use of kernel-doc format: * @move_notify Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: linux-media@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linaro-mm-sig@lists.linaro.org Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/7bcbe6fe-0b4b-87da-d003-b68a26eb4cf0@infradead.org
2020-04-01dma-buf: add peer2peer flagChristian König1-0/+10
Add a peer2peer flag noting that the importer can deal with device resources which are not backed by pages. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/359286/
2020-02-27dma-buf: drop dynamic_mapping flagChristian König1-16/+5
Instead use the pin() callback to detect dynamic DMA-buf handling. Since amdgpu is now migrated it doesn't make much sense to keep the extra flag. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/353997/?series=73646&rev=1
2020-02-27dma-buf: add dynamic DMA-buf handling v15Christian König1-11/+71
On the exporter side we add optional explicit pinning callbacks. Which are called when the importer doesn't implement dynamic handling, move notification or need the DMA-buf locked in place for its use case. On the importer side we add an optional move_notify callback. This callback is used by the exporter to inform the importers that their mappings should be destroyed as soon as possible. This allows the exporter to provide the mappings without the need to pin the backing store. v2: don't try to invalidate mappings when the callback is NULL, lock the reservation obj while using the attachments, add helper to set the callback v3: move flag for invalidation support into the DMA-buf, use new attach_info structure to set the callback v4: use importer_priv field instead of mangling exporter priv. v5: drop invalidation_supported flag v6: squash together with pin/unpin changes v7: pin/unpin takes an attachment now v8: nuke dma_buf_attachment_(map|unmap)_locked, everything is now handled backward compatible v9: always cache when export/importer don't agree on dynamic handling v10: minimal style cleanup v11: drop automatically re-entry avoidance v12: rename callback to move_notify v13: add might_lock in appropriate places v14: rebase on separated locking change v15: add EXPERIMENTAL flag, some more code comments Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/353993/?series=73646&rev=1
2019-11-26dma-buf: Remove kernel map/unmap hooksDaniel Vetter1-25/+0
All implementations are gone now. Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Link: https://patchwork.freedesktop.org/patch/msgid/20191118103536.17675-16-daniel.vetter@ffwll.ch
2019-11-25dma-buf: Drop dma_buf_k(un)mapDaniel Vetter1-2/+0
It's unused. 10 years ago, back when 32bit was still fairly common and trying to not exhaust vmalloc space sounded like a worthwhile goal, adding these to dma_buf made sense. Reality is that they simply never caught on, and nowadays everyone who needs plenty of buffers will run in 64bit mode anyway. Also update the docs in this area to adjust them to reality. The actual hooks in dma_buf_ops will be removed once all the implementations are gone. Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Link: https://patchwork.freedesktop.org/patch/msgid/20191118103536.17675-10-daniel.vetter@ffwll.ch
2019-10-24dma-buf: change DMA-buf locking convention v3Christian König1-6/+57
This patch is a stripped down version of the locking changes necessary to support dynamic DMA-buf handling. It adds a dynamic flag for both importers as well as exporters so that drivers can choose if they want the reservation object locked or unlocked during mapping of attachments. For compatibility between drivers we cache the DMA-buf mapping during attaching an importer as soon as exporter/importer disagree on the dynamic handling. Issues and solutions we considered: - We can't change all existing drivers, and existing improters have strong opinions about which locks they're holding while calling dma_buf_attachment_map/unmap. Exporters also have strong opinions about which locks they can acquire in their ->map/unmap callbacks, levaing no room for change. The solution to avoid this was to move the actual map/unmap out from this call, into the attach/detach callbacks, and cache the mapping. This works because drivers don't call attach/detach from deep within their code callchains (like deep in memory management code called from cs/execbuf ioctl), but directly from the fd2handle implementation. - The caching has some troubles on some soc drivers, which set other modes than DMA_BIDIRECTIONAL. We can't have 2 incompatible mappings, and we can't re-create the mapping at _map time due to the above locking fun. We very carefuly step around that by only caching at attach time if the dynamic mode between importer/expoert mismatches. - There's been quite some discussion on dma-buf mappings which need active cache management, which would all break down when caching, plus we don't have explicit flush operations on the attachment side. The solution to this was to shrug and keep the current discrepancy between what the dma-buf docs claim and what implementations do, with the hope that the begin/end_cpu_access hooks are good enough and that all necessary flushing to keep device mappings consistent will be done there. v2: cleanup set_name merge, improve kerneldoc v3: update commit message, kerneldoc and cleanup _debug_show() Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/336788/
2019-08-13dma-buf: rename reservation_object to dma_resvChristian König1-2/+2
Be more consistent with the naming of the other DMA-buf objects. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/323401/
2019-07-15Merge tag 'drm-next-2019-07-16' of git://anongit.freedesktop.org/drm/drmLinus Torvalds1-10/+42
Pull drm updates from Dave Airlie: "The biggest thing in this is the AMD Navi GPU support, this again contains a bunch of header files that are large. These are the new AMD RX5700 GPUs that just recently became available. New drivers: - ST-Ericsson MCDE driver - Ingenic JZ47xx SoC UAPI change: - HDR source metadata property Core: - HDR inforframes and EDID parsing - drm hdmi infoframe unpacking - remove prime sg_table caching into dma-buf - New gem vram helpers to reduce driver code - Lots of drmP.h removal - reservation fencing fix - documentation updates - drm_fb_helper_connector removed - mode name command handler rewrite fbcon: - Remove the fbcon notifiers ttm: - forward progress fixes dma-buf: - make mmap call optional - debugfs refcount fixes - dma-fence free with pending signals fix - each dma-buf gets an inode Panels: - Lots of additional panel bindings amdgpu: - initial navi10 support - avoid hw reset - HDR metadata support - new thermal sensors for vega asics - RAS fixes - use HMM rather than MMU notifier - xgmi topology via kfd - SR-IOV fixes - driver reload fixes - DC use a core bpc attribute - Aux fixes for DC - Bandwidth calc updates for DC - Clock handling refactor - kfd VEGAM support vmwgfx: - Coherent memory support changes i915: - HDR Support - HDMI i2c link - Icelake multi-segmented gamma support - GuC firmware update - Mule Creek Canyon PCH support for EHL - EHL platform updtes - move i915.alpha_support to i915.force_probe - runtime PM refactoring - VBT parsing refactoring - DSI fixes - struct mutex dependency reduction - GEM code reorg mali-dp: - Komeda driver features msm: - dsi vs EPROBE_DEFER fixes - msm8998 snapdragon 835 support - a540 gpu support - mdp5 and dpu interconnect support exynos: - drmP.h removal tegra: - misc fixes tda998x: - audio support improvements - pixel repeated mode support - quantisation range handling corrections - HDMI vendor info fix armada: - interlace support fix - overlay/video plane register handling refactor - add gamma support rockchip: - RX3328 support panfrost: - expose perf counters via hidden ioctls vkms: - enumerate CRC sources list ast: - rework BO handling mgag200: - rework BO handling dw-hdmi: - suspend/resume support rcar-du: - R8A774A1 Soc Support - LVDS dual-link mode support - Additional formats - Misc fixes omapdrm: - DSI command mode display support stm - fb modifier support - runtime PM support sun4i: - use vmap ops vc4: - binner bo binding rework v3d: - compute shader support - resync/sync fixes - job management refactoring lima: - NULL pointer in irq handler fix - scheduler default timeout virtio: - fence seqno support - trace events bochs: - misc fixes tc458767: - IRQ/HDP handling sii902x: - HDMI audio support atmel-hlcdc: - misc fixes meson: - zpos support" * tag 'drm-next-2019-07-16' of git://anongit.freedesktop.org/drm/drm: (1815 commits) Revert "Merge branch 'vmwgfx-next' of git://people.freedesktop.org/~thomash/linux into drm-next" Revert "mm: adjust apply_to_pfn_range interface for dropped token." mm: adjust apply_to_pfn_range interface for dropped token. drm/amdgpu/navi10: add uclk activity sensor drm/amdgpu: properly guard the generic discovery code drm/amdgpu: add missing documentation on new module parameters drm/amdgpu: don't invalidate caches in RELEASE_MEM, only do the writeback drm/amd/display: avoid 64-bit division drm/amdgpu/psp11: simplify the ucode register logic drm/amdgpu: properly guard DC support in navi code drm/amd/powerplay: vega20: fix uninitialized variable use drm/amd/display: dcn20: include linux/delay.h amdgpu: make pmu support optional drm/amd/powerplay: Zero initialize current_rpm in vega20_get_fan_speed_percent drm/amd/powerplay: Zero initialize freq in smu_v11_0_get_current_clk_freq drm/amd/powerplay: Use memset to initialize metrics structs drm/amdgpu/mes10.1: Fix header guard drm/amd/powerplay: add temperature sensor support for navi10 drm/amdgpu: fix scheduler timeout calc drm/amdgpu: Prepare for hmm_range_register API change (v2) ...
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 234Thomas Gleixner1-12/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 503 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Enrico Weigelt <info@metux.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-14dma-buf: add DMA_BUF_SET_NAME ioctlsGreg Hackmann1-1/+4
This patch adds complimentary DMA_BUF_SET_NAME ioctls, which lets userspace processes attach a free-form name to each buffer. This information can be extremely helpful for tracking and accounting shared buffers. For example, on Android, we know what each buffer will be used for at allocation time: GL, multimedia, camera, etc. The userspace allocator can use DMA_BUF_SET_NAME to associate that information with the buffer, so we can later give developers a breakdown of how much memory they're allocating for graphics, camera, etc. Signed-off-by: Greg Hackmann <ghackmann@google.com> Signed-off-by: Chenbo Feng <fengc@google.com> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190613223408.139221-3-fengc@google.com
2019-05-22dma-buf: start caching of sg_table objects v2Christian König1-0/+13
To allow a smooth transition from pinning buffer objects to dynamic invalidation we first start to cache the sg_table for an attachment. v2: keep closer to the DRM implementation Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.kernel.org/patch/10943053/
2019-04-24dma-buf: Update [un]map documentation to match the other functionsAndrew F. Davis1-4/+25
Other function have inline documentation, a couple still have theirs at the top of the structure, update the docs and move them inline. Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190321200957.16938-2-afd@ti.com
2019-04-24dma-buf: Remove leftover [un]map_atomic commentsAndrew F. Davis1-5/+0
The map_atomic/unmap_atomic callbacks have been removed, remove the related comments. Fixes: f664a5269542 ("dma-buf: remove kmap_atomic interface") Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190321200957.16938-1-afd@ti.com
2018-06-20dma-buf: remove kmap_atomic interfaceChristian König1-4/+0
Neither used nor correctly implemented anywhere. Just completely remove the interface. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/226645/
2018-06-20dma_buf: remove device parameter from attach callback v2Christian König1-7/+6
The device parameter is completely unused because it is available in the attachment structure as well. v2: fix kerneldoc as well Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/226643/
2018-06-01dma-buf: make map_atomic and map function pointers optionalGerd Hoffmann1-2/+2
So drivers don't need dummy functions just returning NULL. Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Link: http://patchwork.freedesktop.org/patch/msgid/20180529135918.19729-1-kraxel@redhat.com
2017-11-27dmabuf: annotate dma_buf->activeAl Viro1-1/+1
Contains POLL... bitmaps Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-01 23:00:53 +0000