summaryrefslogtreecommitdiff
path: root/fs
AgeCommit message (Collapse)AuthorFilesLines
2015-12-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds1-2/+2
Pull networking fixes from David Miller: "A lot of Thanksgiving turkey leftovers accumulated, here goes: 1) Fix bluetooth l2cap_chan object leak, from Johan Hedberg. 2) IDs for some new iwlwifi chips, from Oren Givon. 3) Fix rtlwifi lockups on boot, from Larry Finger. 4) Fix memory leak in fm10k, from Stephen Hemminger. 5) We have a route leak in the ipv6 tunnel infrastructure, fix from Paolo Abeni. 6) Fix buffer pointer handling in arm64 bpf JIT,f rom Zi Shen Lim. 7) Wrong lockdep annotations in tcp md5 support, fix from Eric Dumazet. 8) Work around some middle boxes which prevent proper handling of TCP Fast Open, from Yuchung Cheng. 9) TCP repair can do huge kmalloc() requests, build paged SKBs instead. From Eric Dumazet. 10) Fix msg_controllen overflow in scm_detach_fds, from Daniel Borkmann. 11) Fix device leaks on ipmr table destruction in ipv4 and ipv6, from Nikolay Aleksandrov. 12) Fix use after free in epoll with AF_UNIX sockets, from Rainer Weikusat. 13) Fix double free in VRF code, from Nikolay Aleksandrov. 14) Fix skb leaks on socket receive queue in tipc, from Ying Xue. 15) Fix ifup/ifdown crach in xgene driver, from Iyappan Subramanian. 16) Fix clearing of persistent array maps in bpf, from Daniel Borkmann. 17) In TCP, for the cross-SYN case, we don't initialize tp->copied_seq early enough. From Eric Dumazet. 18) Fix out of bounds accesses in bpf array implementation when updating elements, from Daniel Borkmann. 19) Fill gaps in RCU protection of np->opt in ipv6 stack, from Eric Dumazet. 20) When dumping proxy neigh entries, we have to accomodate NULL device pointers properly, from Konstantin Khlebnikov. 21) SCTP doesn't release all ipv6 socket resources properly, fix from Eric Dumazet. 22) Prevent underflows of sch->q.qlen for multiqueue packet schedulers, also from Eric Dumazet. 23) Fix MAC and unicast list handling in bnxt_en driver, from Jeffrey Huang and Michael Chan. 24) Don't actively scan radar channels, from Antonio Quartulli" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (110 commits) net: phy: reset only targeted phy bnxt_en: Setup uc_list mac filters after resetting the chip. bnxt_en: enforce proper storing of MAC address bnxt_en: Fixed incorrect implementation of ndo_set_mac_address net: lpc_eth: remove irq > NR_IRQS check from probe() net_sched: fix qdisc_tree_decrease_qlen() races openvswitch: fix hangup on vxlan/gre/geneve device deletion ipv4: igmp: Allow removing groups from a removed interface ipv6: sctp: implement sctp_v6_destroy_sock() arm64: bpf: add 'store immediate' instruction ipv6: kill sk_dst_lock ipv6: sctp: add rcu protection around np->opt net/neighbour: fix crash at dumping device-agnostic proxy entries sctp: use GFP_USER for user-controlled kmalloc sctp: convert sack_needed and sack_generation to bits ipv6: add complete rcu protection around np->opt bpf: fix allocation warnings in bpf maps and integer overflow mvebu: dts: enable IP checksum with jumbo frames for Armada 38x on Port0 net: mvneta: enable setting custom TX IP checksum limit net: mvneta: fix error path for building skb ...
2015-12-03Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+9
Pull block fixes from Jens Axboe: "A collection of fixes from this series. The most important here is a regression fix for an issue that some folks would hit in blk-merge.c, and the NVMe queue depth limit for the screwed up Apple "nvme" controller. In more detail, this pull request contains: - a set of fixes for null_blk, including a fix for a few corner cases where we could hang the device. From Arianna and Paolo. - lightnvm: - A build improvement from Keith. - Update the qemu pci id detection from Matias. - Error handling fixes for leaks and other little fixes from Sudip and Wenwei. - fix from Eric where BLKRRPART would not return EBUSY for whole device mounts, only when partitions were mounted. - fix from Jan Kara, where EOF O_DIRECT reads would return negatively. - remove check for rq_mergeable() when checking limits for cloned requests. The check doesn't make any sense. It's assuming that since NOMERGE is set on the request that we don't have to recalculate limits since the request didn't change, but that's not true if the request has been redirected. From Hannes. - correctly get the bio front segment value set for single segment bio's, fixing a BUG() in blk-merge. From Ming" * 'for-linus' of git://git.kernel.dk/linux-block: nvme: temporary fix for Apple controller reset null_blk: change type of completion_nsec to unsigned long null_blk: guarantee device restart in all irq modes null_blk: set a separate timer for each command blk-merge: fix computing bio->bi_seg_front_size in case of single segment direct-io: Fix negative return from dio read beyond eof block: Always check queue limits for cloned requests lightnvm: missing nvm_lock acquire lightnvm: unconverted ppa returned in get_bb_tbl lightnvm: refactor and change vendor id for qemu lightnvm: do device max sectors boundary check first lightnvm: fix ioctl memory leaks lightnvm: free memory when gennvm register fails lightnvm: Simplify config when disabled Return EBUSY from BLKRRPART for mounted whole-dev fs
2015-12-01net: rename SOCK_ASYNC_NOSPACE and SOCK_ASYNC_WAITDATAEric Dumazet1-2/+2
This patch is a cleanup to make following patch easier to review. Goal is to move SOCK_ASYNC_NOSPACE and SOCK_ASYNC_WAITDATA from (struct socket)->flags to a (struct socket_wq)->flags to benefit from RCU protection in sock_wake_async() To ease backports, we rename both constants. Two new helpers, sk_set_bit(int nr, struct sock *sk) and sk_clear_bit(int net, struct sock *sk) are added so that following patch can change their implementation. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-30direct-io: Fix negative return from dio read beyond eofJan Kara1-1/+9
Assume a filesystem with 4KB blocks. When a file has size 1000 bytes and we issue direct IO read at offset 1024, blockdev_direct_IO() reads the tail of the last block and the logic for handling short DIO reads in dio_complete() results in a return value -24 (1000 - 1024) which obviously confuses userspace. Fix the problem by bailing out early once we sample i_size and can reliably check that direct IO read starts beyond i_size. Reported-by: Avi Kivity <avi@scylladb.com> Fixes: 9fe55eea7e4b444bafc42fa0000cc2d1d2847275 CC: stable@vger.kernel.org CC: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-27Merge tag 'nfs-for-4.4-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds8-64/+77
Pull NFS client bugfixes from Trond Myklebust: "Highlights include: Stable patches: - Fix a NFSv4 callback identifier leak that was also causing client crashes - Fix NFSv4 callback decoding issues when incoming requests are truncated - Don't declare the attribute cache valid when we call nfs_update_inode with an empty attribute structure. - Resend LAYOUTGET when there is a race that changes the seqid Bugfixes: - Fix a number of issues with the NFSv4.2 CLONE ioctl() - Properly set NFS v4.2 NFSDBG_FACILITY - NFSv4 referrals are broken; Cleanup FATTR4_WORD0_FS_LOCATIONS after decoding success - Use sliding delay when LAYOUTGET gets NFS4ERR_DELAY - Ensure that attrcache is revalidated after a SETATTR" * tag 'nfs-for-4.4-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: nfs4: resend LAYOUTGET when there is a race that changes the seqid nfs: if we have no valid attrs, then don't declare the attribute cache valid nfs: ensure that attrcache is revalidated after a SETATTR nfs4: limit callback decoding to received bytes nfs4: start callback_ident at idr 1 nfs: use sliding delay when LAYOUTGET gets NFS4ERR_DELAY NFS4: Cleanup FATTR4_WORD0_FS_LOCATIONS after decoding success NFS: Properly set NFS v4.2 NFSDBG_FACILITY nfs: reduce the amount of ifdefs for v4.2 in nfs4file.c nfs: use btrfs ioctl defintions for clone nfs: allow intra-file CLONE nfs: offer native ioctls even if CONFIG_COMPAT is set nfs: pass on count for CLONE operations
2015-11-27Merge branch 'for-linus-4.4' of ↵Linus Torvalds12-66/+219
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "This has Mark Fasheh's patches to fix quota accounting during subvol deletion, which we've been working on for a while now. The patch is pretty small but it's a key fix. Otherwise it's a random assortment" * 'for-linus-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: fix balance range usage filters in 4.4-rc btrfs: qgroup: account shared subtree during snapshot delete Btrfs: use btrfs_get_fs_root in resolve_indirect_ref btrfs: qgroup: fix quota disable during rescan Btrfs: fix race between cleaner kthread and space cache writeout Btrfs: fix scrub preventing unused block groups from being deleted Btrfs: fix race between scrub and block group deletion btrfs: fix rcu warning during device replace btrfs: Continue replace when set_block_ro failed btrfs: fix clashing number of the enhanced balance usage filter Btrfs: fix the number of transaction units needed to remove a block group Btrfs: use global reserve when deleting unused block group after ENOSPC Btrfs: tests: checking for NULL instead of IS_ERR() btrfs: fix signed overflows in btrfs_sync_file
2015-11-25nfs4: resend LAYOUTGET when there is a race that changes the seqidJeff Layton1-25/+31
pnfs_layout_process will check the returned layout stateid against what the kernel has in-core. If it turns out that the stateid we received is older, then we should resend the LAYOUTGET instead of falling back to MDS I/O. Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Cc: stable@vger.kernel.org # 3.18+ Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-11-25nfs: if we have no valid attrs, then don't declare the attribute cache validJeff Layton1-1/+5
If we pass in an empty nfs_fattr struct to nfs_update_inode, it will (correctly) not update any of the attributes, but it then clears the NFS_INO_INVALID_ATTR flag, which indicates that the attributes are up to date. Don't clear the flag if the fattr struct has no valid attrs to apply. Reviewed-by: Steve French <steve.french@primarydata.com> Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Cc: stable@vger.kernel.org Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-11-25nfs: ensure that attrcache is revalidated after a SETATTRJeff Layton1-1/+4
If we get no post-op attributes back from a SETATTR operation, then no attributes will of course be updated during the call to nfs_update_inode. We know however that the attributes are invalid at that point, since we just changed some of them. At the very least, the ctime will be bogus. If we get no post-op attributes back on the call, mark the attrcache invalid to reflect that fact. Reviewed-by: Steve French <steve.french@primarydata.com> Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-11-25btrfs: fix balance range usage filters in 4.4-rcHolger Hoffstätte1-2/+2
There's a regression in 4.4-rc since commit bc3094673f22 (btrfs: extend balance filter usage to take minimum and maximum) in that existing (non-ranged) balance with -dusage=x no longer works; all chunks are skipped. After staring at the code for a while and wondering why a non-ranged balance would even need min and max thresholds (..which then were not set correctly, leading to the bug) I realized that the only problem was the fact that the filter functions were named wrong, thanks to patching copypasta. Simply renaming both functions lets the existing btrfs-progs call balance with -dusage=x and now the non-ranged filter function is invoked, properly using only a single chunk limit. Signed-off-by: Holger Hoffstätte <holger.hoffstaette@googlemail.com> Fixes: bc3094673f22 ("btrfs: extend balance filter usage to take minimum and maximum") Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-11-25btrfs: qgroup: account shared subtree during snapshot deleteMark Fasheh2-7/+42
Commit 0ed4792 ('btrfs: qgroup: Switch to new extent-oriented qgroup mechanism.') removed our qgroup accounting during btrfs_drop_snapshot(). Predictably, this results in qgroup numbers going bad shortly after a snapshot is removed. Fix this by adding a dirty extent record when we encounter extents during our shared subtree walk. This effectively restores the functionality we had with the original shared subtree walking code in 1152651 (btrfs: qgroup: account shared subtrees during snapshot delete). The idea with the original patch (and this one) is that shared subtrees can get skipped during drop_snapshot. The shared subtree walk then allows us a chance to visit those extents and add them to the qgroup work for later processing. This ultimately makes the accounting for drop snapshot work. The new qgroup code nicely handles all the other extents during the tree walk via the ref dec/inc functions so we don't have to add actions beyond what we had originally. Signed-off-by: Mark Fasheh <mfasheh@suse.de> Signed-off-by: Chris Mason <clm@fb.com>
2015-11-25Btrfs: use btrfs_get_fs_root in resolve_indirect_refJosef Bacik1-1/+1
The backref code will look up the fs_root we're trying to resolve our indirect refs for, unfortunately we use btrfs_read_fs_root_no_name, which returns -ENOENT if the ref is 0. This isn't helpful for the qgroup stuff with snapshot delete as it won't be able to search down the snapshot we are deleting, which will cause us to miss roots. So use btrfs_get_fs_root and send false for check_ref so we can always get the root we're looking for. Thanks, Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Mark Fasheh <mfasheh@suse.de> Signed-off-by: Chris Mason <clm@fb.com>
2015-11-25btrfs: qgroup: fix quota disable during rescanJustin Maggard1-1/+2
There's a race condition that leads to a NULL pointer dereference if you disable quotas while a quota rescan is running. To fix this, we just need to wait for the quota rescan worker to actually exit before tearing down the quota structures. Signed-off-by: Justin Maggard <jmaggard@netgear.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-11-25Btrfs: fix race between cleaner kthread and space cache writeoutFilipe Manana1-13/+16
When a block group becomes unused and the cleaner kthread is currently running, we can end up getting the current transaction aborted with error -ENOENT when we try to commit the transaction, leading to the following trace: [59779.258768] WARNING: CPU: 3 PID: 5990 at fs/btrfs/extent-tree.c:3740 btrfs_write_dirty_block_groups+0x17c/0x214 [btrfs]() [59779.272594] BTRFS: Transaction aborted (error -2) (...) [59779.291137] Call Trace: [59779.291621] [<ffffffff812566f4>] dump_stack+0x4e/0x79 [59779.292543] [<ffffffff8104d0a6>] warn_slowpath_common+0x9f/0xb8 [59779.293435] [<ffffffffa04cb81f>] ? btrfs_write_dirty_block_groups+0x17c/0x214 [btrfs] [59779.295000] [<ffffffff8104d107>] warn_slowpath_fmt+0x48/0x50 [59779.296138] [<ffffffffa04c2721>] ? write_one_cache_group.isra.32+0x77/0x82 [btrfs] [59779.297663] [<ffffffffa04cb81f>] btrfs_write_dirty_block_groups+0x17c/0x214 [btrfs] [59779.299141] [<ffffffffa0549b0d>] commit_cowonly_roots+0x1de/0x261 [btrfs] [59779.300359] [<ffffffffa04dd5b6>] btrfs_commit_transaction+0x4c4/0x99c [btrfs] [59779.301805] [<ffffffffa04b5df4>] btrfs_sync_fs+0x145/0x1ad [btrfs] [59779.302893] [<ffffffff81196634>] sync_filesystem+0x7f/0x93 (...) [59779.318186] ---[ end trace 577e2daff90da33a ]--- The following diagram illustrates a sequence of steps leading to this problem: CPU 1 CPU 2 <at transaction N> adds bg A to list fs_info->unused_bgs adds bg B to list fs_info->unused_bgs <transaction kthread commits transaction N and wakes up the cleaner kthread> cleaner kthread delete_unused_bgs() sees bg A in list fs_info->unused_bgs btrfs_start_transaction() <transaction N + 1 starts> deletes bg A update_block_group(bg C) --> adds bg C to list fs_info->unused_bgs deletes bg B sees bg C in the list fs_info->unused_bgs btrfs_remove_chunk(bg C) btrfs_remove_block_group(bg C) --> checks if the block group is in a dirty list, and because it isn't now, it does nothing --> the block group item is deleted from the extent tree --> adds bg C to list transaction->dirty_bgs some task calls btrfs_commit_transaction(t N + 1) commit_cowonly_roots() btrfs_write_dirty_block_groups() --> sees bg C in cur_trans->dirty_bgs --> calls write_one_cache_group() which returns -ENOENT because it did not find the block group item in the extent tree --> transaction aborte with -ENOENT because write_one_cache_group() returned that error So fix this by adding a block group to the list of dirty block groups before adding it to the list of unused block groups. This happened on a stress test using fsstress plus concurrent calls to fallocate 20G and truncate (releasing part of the space allocated with fallocate). Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-11-25Btrfs: fix scrub preventing unused block groups from being deletedFilipe Manana3-1/+24
Currently scrub can race with the cleaner kthread when the later attempts to delete an unused block group, and the result is preventing the cleaner kthread from ever deleting later the block group - unless the block group becomes used and unused again. The following diagram illustrates that race: CPU 1 CPU 2 cleaner kthread btrfs_delete_unused_bgs() gets block group X from fs_info->unused_bgs and removes it from that list scrub_enumerate_chunks() searches device tree using its commit root finds device extent for block group X gets block group X from the tree fs_info->block_group_cache_tree (via btrfs_lookup_block_group()) sets bg X to RO sees the block group is already RO and therefore doesn't delete it nor adds it back to unused list So fix this by making scrub add the block group again to the list of unused block groups if the block group is still unused when it finished scrubbing it and it hasn't been removed already. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-11-25Btrfs: fix race between scrub and block group deletionFilipe Manana1-4/+16
Scrub can race with the cleaner kthread deleting block groups that are unused (and with relocation too) leading to a failure with error -EINVAL that gets returned to user space. The following diagram illustrates how it happens: CPU 1 CPU 2 cleaner kthread btrfs_delete_unused_bgs() gets block group X from fs_info->unused_bgs sets block group to RO btrfs_remove_chunk(bg X) deletes device extents scrub_enumerate_chunks() searches device tree using its commit root finds device extent for block group X gets block group X from the tree fs_info->block_group_cache_tree (via btrfs_lookup_block_group()) sets bg X to RO (again) btrfs_remove_block_group(bg X) deletes block group from fs_info->block_group_cache_tree removes extent map from fs_info->mapping_tree scrub_chunk(offset X) searches fs_info->mapping_tree for extent map starting at offset X --> doesn't find any such extent map --> returns -EINVAL and scrub errors out to userspace with -EINVAL Fix this by dealing with an extent map lookup failure as an indicator of block group deletion. Issue reproduced with fstest btrfs/071. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-11-25btrfs: fix rcu warning during device replaceDavid Sterba1-4/+2
The test btrfs/011 triggers a rcu warning Reviewed-by: Anand Jain <anand.jain@oracle.com> =============================== [ INFO: suspicious RCU usage. ] 4.4.0-rc1-default+ #286 Tainted: G W ------------------------------- fs/btrfs/volumes.c:1977 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 0 4 locks held by btrfs/28786: 0: (&fs_info->dev_replace.lock_finishing_cancel_unmount){+.+...}, at: [<ffffffffa00bc785>] btrfs_dev_replace_finishing+0x45/0xa00 [btrfs] 1: (uuid_mutex){+.+.+.}, at: [<ffffffffa00bc84f>] btrfs_dev_replace_finishing+0x10f/0xa00 [btrfs] 2: (&fs_devs->device_list_mutex){+.+.+.}, at: [<ffffffffa00bc868>] btrfs_dev_replace_finishing+0x128/0xa00 [btrfs] 3: (&fs_info->chunk_mutex){+.+...}, at: [<ffffffffa00bc87d>] btrfs_dev_replace_finishing+0x13d/0xa00 [btrfs] stack backtrace: CPU: 0 PID: 28786 Comm: btrfs Tainted: G W 4.4.0-rc1-default+ #286 Hardware name: Intel Corporation SandyBridge Platform/To be filled by O.E.M., BIOS ASNBCPT1.86C.0031.B00.1006301607 06/30/2010 0000000000000001 ffff8800a07dfb48 ffffffff8141d47b 0000000000000001 0000000000000001 0000000000000000 ffff8801464a4f00 ffff8800a07dfb78 ffffffff810cd883 ffff880146eb9400 ffff8800a3698600 ffff8800a33fe220 Call Trace: [<ffffffff8141d47b>] dump_stack+0x4f/0x74 [<ffffffff810cd883>] lockdep_rcu_suspicious+0x103/0x140 [<ffffffffa0071261>] btrfs_rm_dev_replace_remove_srcdev+0x111/0x130 [btrfs] [<ffffffff810d354d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff81449536>] ? __percpu_counter_sum+0x66/0x80 [<ffffffffa00bcc15>] btrfs_dev_replace_finishing+0x4d5/0xa00 [btrfs] [<ffffffffa00bc96e>] ? btrfs_dev_replace_finishing+0x22e/0xa00 [btrfs] [<ffffffffa00a8795>] ? btrfs_scrub_dev+0x415/0x6d0 [btrfs] [<ffffffffa003ea69>] ? btrfs_start_transaction+0x9/0x20 [btrfs] [<ffffffffa00bda79>] btrfs_dev_replace_start+0x339/0x590 [btrfs] [<ffffffff81196aa5>] ? __might_fault+0x95/0xa0 [<ffffffffa0078638>] btrfs_ioctl_dev_replace+0x118/0x160 [btrfs] [<ffffffff811409c6>] ? stack_trace_call+0x46/0x70 [<ffffffffa007c914>] ? btrfs_ioctl+0x24/0x1770 [btrfs] [<ffffffffa007ce43>] btrfs_ioctl+0x553/0x1770 [btrfs] [<ffffffff811409c6>] ? stack_trace_call+0x46/0x70 [<ffffffff811d6eb1>] ? do_vfs_ioctl+0x21/0x5a0 [<ffffffff811d6f1c>] do_vfs_ioctl+0x8c/0x5a0 [<ffffffff811e3336>] ? __fget_light+0x86/0xb0 [<ffffffff811e3369>] ? __fdget+0x9/0x20 [<ffffffff811d7451>] ? SyS_ioctl+0x21/0x80 [<ffffffff811d7483>] SyS_ioctl+0x53/0x80 [<ffffffff81b1efd7>] entry_SYSCALL_64_fastpath+0x12/0x6f This is because of unprotected use of rcu_dereference in btrfs_scratch_superblocks. We can't add rcu locks around the whole function because we read the superblock. The fix will use the rcu string buffer directly without the rcu locking. Thi is safe as the device will not go away in the meantime. We're holding the device list mutexes. Restructuring the code to narrow down the rcu section turned out to be impossible, we need to call filp_open (through update_dev_time) on the buffer and this could call kmalloc/__might_sleep. We could call kstrdup with GFP_ATOMIC but it's not absolutely necessary. Fixes: 12b1c2637b6e (Btrfs: enhance btrfs_scratch_superblock to scratch all superblocks) Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-11-25btrfs: Continue replace when set_block_ro failedZhaolei1-2/+18
xfstests/011 failed in node with small_size filesystem. Can be reproduced by following script: DEV_LIST="/dev/vdd /dev/vde" DEV_REPLACE="/dev/vdf" do_test() { local mkfs_opt="$1" local size="$2" dmesg -c >/dev/null umount $SCRATCH_MNT &>/dev/null echo mkfs.btrfs -f $mkfs_opt "${DEV_LIST[*]}" mkfs.btrfs -f $mkfs_opt "${DEV_LIST[@]}" || return 1 mount "${DEV_LIST[0]}" $SCRATCH_MNT echo -n "Writing big files" dd if=/dev/urandom of=$SCRATCH_MNT/t0 bs=1M count=1 >/dev/null 2>&1 for ((i = 1; i <= size; i++)); do echo -n . /bin/cp $SCRATCH_MNT/t0 $SCRATCH_MNT/t$i || return 1 done echo echo Start replace btrfs replace start -Bf "${DEV_LIST[0]}" "$DEV_REPLACE" $SCRATCH_MNT || { dmesg return 1 } return 0 } # Set size to value near fs size # for example, 1897 can trigger this bug in 2.6G device. # ./do_test "-d raid1 -m raid1" 1897 System will report replace fail with following warning in dmesg: [ 134.710853] BTRFS: dev_replace from /dev/vdd (devid 1) to /dev/vdf started [ 135.542390] BTRFS: btrfs_scrub_dev(/dev/vdd, 1, /dev/vdf) failed -28 [ 135.543505] ------------[ cut here ]------------ [ 135.544127] WARNING: CPU: 0 PID: 4080 at fs/btrfs/dev-replace.c:428 btrfs_dev_replace_start+0x398/0x440() [ 135.545276] Modules linked in: [ 135.545681] CPU: 0 PID: 4080 Comm: btrfs Not tainted 4.3.0 #256 [ 135.546439] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.2-0-g33fbe13 by qemu-project.org 04/01/2014 [ 135.547798] ffffffff81c5bfcf ffff88003cbb3d28 ffffffff817fe7b5 0000000000000000 [ 135.548774] ffff88003cbb3d60 ffffffff810a88f1 ffff88002b030000 00000000ffffffe4 [ 135.549774] ffff88003c080000 ffff88003c082588 ffff88003c28ab60 ffff88003cbb3d70 [ 135.550758] Call Trace: [ 135.551086] [<ffffffff817fe7b5>] dump_stack+0x44/0x55 [ 135.551737] [<ffffffff810a88f1>] warn_slowpath_common+0x81/0xc0 [ 135.552487] [<ffffffff810a89e5>] warn_slowpath_null+0x15/0x20 [ 135.553211] [<ffffffff81448c88>] btrfs_dev_replace_start+0x398/0x440 [ 135.554051] [<ffffffff81412c3e>] btrfs_ioctl+0x1d2e/0x25c0 [ 135.554722] [<ffffffff8114c7ba>] ? __audit_syscall_entry+0xaa/0xf0 [ 135.555506] [<ffffffff8111ab36>] ? current_kernel_time64+0x56/0xa0 [ 135.556304] [<ffffffff81201e3d>] do_vfs_ioctl+0x30d/0x580 [ 135.557009] [<ffffffff8114c7ba>] ? __audit_syscall_entry+0xaa/0xf0 [ 135.557855] [<ffffffff810011d1>] ? do_audit_syscall_entry+0x61/0x70 [ 135.558669] [<ffffffff8120d1c1>] ? __fget_light+0x61/0x90 [ 135.559374] [<ffffffff81202124>] SyS_ioctl+0x74/0x80 [ 135.559987] [<ffffffff81809857>] entry_SYSCALL_64_fastpath+0x12/0x6f [ 135.560842] ---[ end trace 2a5c1fc3205abbdd ]--- Reason: When big data writen to fs, the whole free space will be allocated for data chunk. And operation as scrub need to set_block_ro(), and when there is only one metadata chunk in system(or other metadata chunks are all full), the function will try to allocate a new chunk, and failed because no space in device. Fix: When set_block_ro failed for metadata chunk, it is not a problem because scrub_lock paused commit_trancaction in same time, and metadata are always cowed, so the on-the-fly writepages will not write data into same place with scrub/replace. Let replace continue in this case is no problem. Tested by above script, and xfstests/011, plus 100 times xfstests/070. Changelog v1->v2: 1: Add detail comments in source and commit-message. 2: Add dmesg detail into commit-message. 3: Limit return value of -ENOSPC to be passed. All suggested by: Filipe Manana <fdmanana@gmail.com> Suggested-by: Filipe Manana <fdmanana@gmail.com> Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-11-25btrfs: fix clashing number of the enhanced balance usage filterDavid Sterba1-1/+1
I've accidentally picked an already used number for the enhanced usage filter represented by BTRFS_BALANCE_ARGS_USAGE_RANGE, clashing with BTRFS_BALANCE_ARGS_CONVERT. Introduced during the development phase, no backward compatibility issues. Reported-by: Holger Hoffstätte <holger.hoffstaette@googlemail.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: bc3094673f22 ("btrfs: extend balance filter usage to take minimum and maximum") Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-11-25Btrfs: fix the number of transaction units needed to remove a block groupFilipe Manana3-5/+38
We were using only 1 transaction unit when attempting to delete an unused block group but in reality we need 3 + N units, where N corresponds to the number of stripes. We were accounting only for the addition of the orphan item (for the block group's free space cache inode) but we were not accounting that we need to delete one block group item from the extent tree, one free space item from the tree of tree roots and N device extent items from the device tree. While one unit is not enough, it worked most of the time because for each single unit we are too pessimistic and assume an entire tree path, with the highest possible heigth (8), needs to be COWed with eventual node splits at every possible level in the tree, so there was usually enough reserved space for removing all the items and adding the orphan item. However after adding the orphan item, writepages() can by called by the VM subsystem against the btree inode when we are under memory pressure, which causes writeback to start for the nodes we COWed before, this forces the operation to remove the free space item to COW again some (or all of) the same nodes (in the tree of tree roots). Even without writepages() being called, we could fail with ENOSPC because these items are located in multiple trees and one of them might have a higher heigth and require node/leaf splits at many levels, exhausting all the reserved space before removing all the items and adding the orphan. In the kernel 4.0 release, commit 3d84be799194 ("Btrfs: fix BUG_ON in btrfs_orphan_add() when delete unused block group"), we attempted to fix a BUG_ON due to ENOSPC when trying to add the orphan item by making the cleaner kthread reserve one transaction unit before attempting to remove the block group, but this was not enough. We had a couple user reports still hitting the same BUG_ON after 4.0, like Stefan Priebe's report on a 4.2-rc6 kernel for example: http://www.spinics.net/lists/linux-btrfs/msg46070.html So fix this by reserving all the necessary units of metadata. Reported-by: Stefan Priebe <s.priebe@profihost.ag> Fixes: 3d84be799194 ("Btrfs: fix BUG_ON in btrfs_orphan_add() when delete unused block group") Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-11-25Btrfs: use global reserve when deleting unused block group after ENOSPCFilipe Manana6-26/+52
It's possible to reach a state where the cleaner kthread isn't able to start a transaction to delete an unused block group due to lack of enough free metadata space and due to lack of unallocated device space to allocate a new metadata block group as well. If this happens try to use space from the global block group reserve just like we do for unlink operations, so that we don't reach a permanent state where starting a transaction for filesystem operations (file creation, renames, etc) keeps failing with -ENOSPC. Such an unfortunate state was observed on a machine where over a dozen unused data block groups existed and the cleaner kthread was failing to delete them due to ENOSPC error when attempting to start a transaction, and even running balance with a -dusage=0 filter failed with ENOSPC as well. Also unmounting and mounting again the filesystem didn't help. Allowing the cleaner kthread to use the global block reserve to delete the unused data block groups fixed the problem. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-11-25Btrfs: tests: checking for NULL instead of IS_ERR()Dan Carpenter1-1/+3
btrfs_alloc_dummy_root() return an error pointer on failure, it never returns NULL. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-11-25btrfs: fix signed overflows in btrfs_sync_fileDavid Sterba1-3/+7
The calculation of range length in btrfs_sync_file leads to signed overflow. This was caught by PaX gcc SIZE_OVERFLOW plugin. https://forums.grsecurity.net/viewtopic.php?f=1&t=4284 The fsync call passes 0 and LLONG_MAX, the range length does not fit to loff_t and overflows, but the value is converted to u64 so it silently works as expected. The minimal fix is a typecast to u64, switching functions to take (start, end) instead of (start, len) would be more intrusive. Coccinelle script found that there's one more opencoded calculation of the length. <smpl> @@ loff_t start, end; @@ * end - start </smpl> CC: stable@vger.kernel.org Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-11-23nfs4: limit callback decoding to received bytesBenjamin Coddington1-2/+5
A truncated cb_compound request will cause the client to decode null or data from a previous callback for nfs4.1 backchannel case, or uninitialized data for the nfs4.0 case. This is because the path through svc_process_common() advances the request's iov_base and decrements iov_len without adjusting the overall xdr_buf's len field. That causes xdr_init_decode() to set up the xdr_stream with an incorrect length in nfs4_callback_compound(). Fixing this for the nfs4.1 backchannel case first requires setting the correct iov_len and page_len based on the length of received data in the same manner as the nfs4.0 case. Then the request's xdr_buf length can be adjusted for both cases based upon the remaining iov_len and page_len. Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-11-23nfs4: start callback_ident at idr 1Benjamin Coddington1-1/+1
If clp->cl_cb_ident is zero, then nfs_cb_idr_remove_locked() skips removing it when the nfs_client is freed. A decoding or server bug can then find and try to put that first nfs_client which would lead to a crash. Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Fixes: d6870312659d ("nfs4client: convert to idr_alloc()") Cc: stable@vger.kernel.org Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-11-23nfs: use sliding delay when LAYOUTGET gets NFS4ERR_DELAYJeff Layton1-1/+1
When LAYOUTGET gets NFS4ERR_DELAY, we currently will wait 15s before retrying the call. That is a _very_ long time, so add a timeout value to struct nfs4_layoutget and pass nfs4_async_handle_error a pointer to it. This allows the RPC engine to use a sliding delay window, instead of a 15s delay. Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-11-23NFS4: Cleanup FATTR4_WORD0_FS_LOCATIONS after decoding successKinglong Mee1-0/+1
Commit 1ca843a2d2 "nfs: Fix GETATTR bitmap verification" has check the bitmap after decoding success, but decode_attr_fs_locations forgets cleanup the FATTR4_WORD0_FS_LOCATIONS bits. decode_getfattr_attrs always return -EIO when meeting FS_LOCATIONS now. ls: cannot access /mnt/referal: Input/output error ls: cannot access /mnt/replicas: Input/output error total 32 drwxr-xr-x. 7 root root 8192 Nov 16 20:36 pnfs ??????????? ? ? ? ? ? referal ??????????? ? ? ? ? ? replicas v2: clear the bit earlier Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Kinglong Mee <kinglongmee@gmail.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-11-23NFS: Properly set NFS v4.2 NFSDBG_FACILITYAnna Schumaker1-1/+1
NFS v4.2 operations can work outside of pNFS, so dprintk() output shouldn't be placed under NFSDBG_PNFS. Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-11-23nfs: reduce the amount of ifdefs for v4.2 in nfs4file.cChristoph Hellwig1-20/+7
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-11-23nfs: use btrfs ioctl defintions for cloneChristoph Hellwig1-4/+6
The NFS CLONE_RANGE defintion was wrong and thus never worked. Fix this by simply using the btrfs ioctl defintion. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-11-23nfs: allow intra-file CLONEChristoph Hellwig1-5/+14
Originally CLONE didn't allow for intra-file clones, but we recently updated the spec to support this feature which is also supported by local Linux file systems. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-11-23nfs: offer native ioctls even if CONFIG_COMPAT is setChristoph Hellwig1-3/+0
Without this for example 64-bit binaries on typical amd64 distributions would not be able to use ioctls on NFS. For now this only affects clones. Additionally ->compat_ioctl is defined even for non-compat builds, so get rid of the pointless ifdef. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-11-23nfs: pass on count for CLONE operationsChristoph Hellwig1-0/+1
Currently we pass uninitialized stack garbage in the count parameter. The value is usually large enought to clone whole files and thus let simple tests pass, but it makes the tests for range clones very unhappy. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-11-23vfs: Avoid softlockups with sendfile(2)Jan Kara1-0/+1
The following test program from Dmitry can cause softlockups or RCU stalls as it copies 1GB from tmpfs into eventfd and we don't have any scheduling point at that path in sendfile(2) implementation: int r1 = eventfd(0, 0); int r2 = memfd_create("", 0); unsigned long n = 1<<30; fallocate(r2, 0, 0, n); sendfile(r1, r2, 0, n); Add cond_resched() into __splice_from_pipe() to fix the problem. CC: Dmitry Vyukov <dvyukov@google.com> CC: stable@vger.kernel.org Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-23vfs: Make sendfile(2) killable even betterJan Kara1-0/+7
Commit 296291cdd162 (mm: make sendfile(2) killable) fixed an issue where sendfile(2) was doing a lot of tiny writes into a filesystem and thus was unkillable for a long time. However sendfile(2) can be (mis)used to issue lots of writes into arbitrary file descriptor such as evenfd or similar special file descriptors which never hit the standard filesystem write path and thus are still unkillable. E.g. the following example from Dmitry burns CPU for ~16s on my test system without possibility to be killed: int r1 = eventfd(0, 0); int r2 = memfd_create("", 0); unsigned long n = 1<<30; fallocate(r2, 0, 0, n); sendfile(r1, r2, 0, n); There are actually quite a few tests for pending signals in sendfile code however we data to write is always available none of them seems to trigger. So fix the problem by adding a test for pending signal into splice_from_pipe_next() also before the loop waiting for pipe buffers to be available. This should fix all the lockup issues with sendfile of the do-ton-of-tiny-writes nature. CC: stable@vger.kernel.org Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-23fix sysvfs symlinksAl Viro1-9/+2
The thing got broken back in 2002 - sysvfs does *not* have inline symlinks; even short ones have bodies stored in the first block of file. sysv_symlink() handles that correctly; unfortunately, attempting to look an existing symlink up will end up confusing them for inline symlinks, and interpret the block number containing the body as the body itself. Nobody has noticed until now, which says something about the level of testing sysvfs gets ;-/ Cc: stable@vger.kernel.org # all of them, not that anyone cared Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-21Merge branch 'akpm' (patches from Andrew)Linus Torvalds5-38/+157
Merge misc fixes from Andrew Morton: "A bunch of fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: slub: mark the dangling ifdef #else of CONFIG_SLUB_DEBUG slub: avoid irqoff/on in bulk allocation slub: create new ___slab_alloc function that can be called with irqs disabled mm: fix up sparse warning in gfpflags_allow_blocking ocfs2: fix umask ignored issue PM/OPP: add entry in MAINTAINERS kernel/panic.c: turn off locks debug before releasing console lock kernel/signal.c: unexport sigsuspend() kasan: fix kmemleak false-positive in kasan_module_alloc() fat: fix fake_offset handling on error path mm/hugetlbfs: fix bugs in fallocate hole punch of areas with holes mm/page-writeback.c: initialize m_dirty to avoid compile warning various: fix pci_set_dma_mask return value checking mm: loosen MADV_NOHUGEPAGE to enable Qemu postcopy on s390 mm: vmalloc: don't remove inexistent guard hole in remove_vm_area() tools/vm/page-types.c: support KPF_IDLE ncpfs: don't allow negative timeouts configfs: allow dynamic group creation MAINTAINERS: add Moritz as reviewer for FPGA Manager Framework slab.h: sprinkle __assume_aligned attributes
2015-11-20ocfs2: fix umask ignored issueJunxiao Bi1-0/+2
New created file's mode is not masked with umask, and this makes umask not work for ocfs2 volume. Fixes: 702e5bc ("ocfs2: use generic posix ACL infrastructure") Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Gang He <ghe@suse.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-20fat: fix fake_offset handling on error pathOGAWA Hirofumi1-5/+11
For the root directory, . and .. are faked (using dir_emit_dots()) and ctx->pos is reset from 2 to 0. A corrupted root directory could cause fat_get_entry() to fail, but ->iterate() (fat_readdir()) reports progress to the VFS (with ctx->pos rewound to 0), so any following calls to ->iterate() continue to return the same entries again and again. The result is that userspace will never see the end of the directory, causing e.g. 'ls' to hang in a getdents() loop. [hirofumi@mail.parknet.co.jp: cleanup and make sure to correct fake_offset] Reported-by: Vegard Nossum <vegard.nossum@oracle.com> Tested-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Richard Weinberger <richard.weinberger@gmail.com> Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-20mm/hugetlbfs: fix bugs in fallocate hole punch of areas with holesMike Kravetz1-33/+32
Hugh Dickins pointed out problems with the new hugetlbfs fallocate hole punch code. These problems are in the routine remove_inode_hugepages and mostly occur in the case where there are holes in the range of pages to be removed. These holes could be the result of a previous hole punch or simply sparse allocation. The current code could access pages outside the specified range. remove_inode_hugepages handles both hole punch and truncate operations. Page index handling was fixed/cleaned up so that the loop index always matches the page being processed. The code now only makes a single pass through the range of pages as it was determined page faults could not race with truncate. A cond_resched() was added after removing up to PAGEVEC_SIZE pages. Some totally unnecessary code in hugetlbfs_fallocate() that remained from early development was also removed. Tested with fallocate tests submitted here: http://librelist.com/browser//libhugetlbfs/2015/6/25/patch-tests-add-tests-for-fallocate-system-call/ And, some ftruncate tests under development Fixes: b5cec28d36f5 ("hugetlbfs: truncate_hugepages() takes a range of pages") Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: "Hillf Danton" <hillf.zj@alibaba-inc.com> Cc: <stable@vger.kernel.org> [4.3] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-20ncpfs: don't allow negative timeoutsDan Carpenter1-0/+2
This code causes a static checker warning because it's a user controlled variable where we cap the upper bound but not the lower bound. Let's return an -EINVAL for negative timeouts. [akpm@linux-foundation.org: remove unneeded `else'] Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Jan Kara <jack@suse.com> Cc: Petr Vandrovec <petr@vandrovec.name> Cc: David Howells <dhowells@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-20configfs: allow dynamic group creationDaniel Baluta1-0/+110
This patchset introduces IIO software triggers, offers a way of configuring them via configfs and adds the IIO hrtimer based interrupt source to be used with software triggers. The architecture is now split in 3 parts, to remove all IIO trigger specific parts from IIO configfs core: (1) IIO configfs - creates the root of the IIO configfs subsys. (2) IIO software triggers - software trigger implementation, dynamically creating /config/iio/triggers group. (3) IIO hrtimer trigger - is the first interrupt source for software triggers (with syfs to follow). Each trigger type can implement its own set of attributes. Lockdep seems to be happy with the locking in configfs patch. This patch (of 5): We don't want to hardcode default groups at subsystem creation time. We export: * configfs_register_group * configfs_unregister_group to allow drivers to programatically create/destroy groups later, after module init time. This is needed for IIO configfs support. (akpm: the other 4 patches to be merged via the IIO tree) Signed-off-by: Daniel Baluta <daniel.baluta@intel.com> Suggested-by: Lars-Peter Clausen <lars@metafoo.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Joel Becker <jlbec@evilplan.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Octavian Purdila <octavian.purdila@intel.com> Cc: Paul Bolle <pebolle@tiscali.nl> Cc: Adriana Reus <adriana.reus@intel.com> Cc: Cristina Opriceana <cristina.opriceana@gmail.com> Cc: Peter Meerwald <pmeerw@pmeerw.net> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-20Merge branch 'libnvdimm-fixes' of ↵Linus Torvalds5-3/+33
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm fixes from Dan Williams: - A collection of crash and deadlock fixes for DAX that are also tagged for -stable. We will look to re-enable DAX pmd mappings in 4.5, but for now 4.4 and -stable should disable it by default. - A fixup to ext2 and ext4 to mirror the same warning emitted by XFS when mounting with "-o dax" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: block: protect rw_page against device teardown mm, dax: fix DAX deadlocks (COW fault) dax: disable pmd mappings ext2, ext4: warn when mounting with dax enabled
2015-11-19block: protect rw_page against device teardownDan Williams1-2/+16
Fix use after free crashes like the following: general protection fault: 0000 [#1] SMP Call Trace: [<ffffffffa0050216>] ? pmem_do_bvec.isra.12+0xa6/0xf0 [nd_pmem] [<ffffffffa0050ba2>] pmem_rw_page+0x42/0x80 [nd_pmem] [<ffffffff8128fd90>] bdev_read_page+0x50/0x60 [<ffffffff812972f0>] do_mpage_readpage+0x510/0x770 [<ffffffff8128fd20>] ? I_BDEV+0x20/0x20 [<ffffffff811d86dc>] ? lru_cache_add+0x1c/0x50 [<ffffffff81297657>] mpage_readpages+0x107/0x170 [<ffffffff8128fd20>] ? I_BDEV+0x20/0x20 [<ffffffff8128fd20>] ? I_BDEV+0x20/0x20 [<ffffffff8129058d>] blkdev_readpages+0x1d/0x20 [<ffffffff811d615f>] __do_page_cache_readahead+0x28f/0x310 [<ffffffff811d6039>] ? __do_page_cache_readahead+0x169/0x310 [<ffffffff811c5abd>] ? pagecache_get_page+0x2d/0x1d0 [<ffffffff811c76f6>] filemap_fault+0x396/0x530 [<ffffffff811f816e>] __do_fault+0x4e/0xf0 [<ffffffff811fce7d>] handle_mm_fault+0x11bd/0x1b50 Cc: <stable@vger.kernel.org> Cc: Jens Axboe <axboe@fb.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Reported-by: kbuild test robot <lkp@intel.com> Acked-by: Matthew Wilcox <willy@linux.intel.com> [willy: symmetry fixups] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-11-16dax: disable pmd mappingsDan Williams2-0/+10
While dax pmd mappings are functional in the nominal path they trigger kernel crashes in the following paths: BUG: unable to handle kernel paging request at ffffea0004098000 IP: [<ffffffff812362f7>] follow_trans_huge_pmd+0x117/0x3b0 [..] Call Trace: [<ffffffff811f6573>] follow_page_mask+0x2d3/0x380 [<ffffffff811f6708>] __get_user_pages+0xe8/0x6f0 [<ffffffff811f7045>] get_user_pages_unlocked+0x165/0x1e0 [<ffffffff8106f5b1>] get_user_pages_fast+0xa1/0x1b0 kernel BUG at arch/x86/mm/gup.c:131! [..] Call Trace: [<ffffffff8106f34c>] gup_pud_range+0x1bc/0x220 [<ffffffff8106f634>] get_user_pages_fast+0x124/0x1b0 BUG: unable to handle kernel paging request at ffffea0004088000 IP: [<ffffffff81235f49>] copy_huge_pmd+0x159/0x350 [..] Call Trace: [<ffffffff811fad3c>] copy_page_range+0x34c/0x9f0 [<ffffffff810a0daf>] copy_process+0x1b7f/0x1e10 [<ffffffff810a11c1>] _do_fork+0x91/0x590 All of these paths are interpreting a dax pmd mapping as a transparent huge page and making the assumption that the pfn is covered by the memmap, i.e. that the pfn has an associated struct page. PTE mappings do not suffer the same fate since they have the _PAGE_SPECIAL flag to cause the gup path to fault. We can do something similar for the PMD path, or otherwise defer pmd support for cases where a struct page is available. For now, 4.4-rc and -stable need to disable dax pmd support by default. For development the "depends on BROKEN" line can be removed from CONFIG_FS_DAX_PMD. Cc: <stable@vger.kernel.org> Cc: Jan Kara <jack@suse.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-11-16FS-Cache: Add missing initialization of ret in cachefiles_write_page()Geert Uytterhoeven1-1/+1
fs/cachefiles/rdwr.c: In function ‘cachefiles_write_page’: fs/cachefiles/rdwr.c:882: warning: ‘ret’ may be used uninitialized in this function If the jump to label "error" is taken, "ret" will indeed be uninitialized, and random stack data may be printed by the debug code. Fixes: 102f4d900c9c8f5e ("FS-Cache: Handle a write to the page immediately beyond the EOF marker") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-16ext2, ext4: warn when mounting with dax enabledDan Williams2-1/+7
Similar to XFS warn when mounting DAX while it is still considered under development. Also, aspects of the DAX implementation, for example synchronization against multiple faults and faults causing block allocation, depend on the correct implementation in the filesystem. The maturity of a given DAX implementation is filesystem specific. Cc: <stable@vger.kernel.org> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: linux-ext4@vger.kernel.org Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: Dave Chinner <david@fromorbit.com> Acked-by: Jan Kara <jack@suse.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-11-13Merge tag 'chrome-platform-4.4' of ↵Linus Torvalds1-2/+15
git://git.kernel.org/pub/scm/linux/kernel/git/olof/chrome-platform Pull chrome platform updates from Olof Johansson: "Here's the branch of chrome platform changes for v4.4. Some have been queued up for the full 4.3 release cycle since I forgot to send them in for that round (rebased early on to deal with fixes conflicts). Most of these enable EC communication stuff -- Pixel 2015 support, enabling building for ARM64 platforms, and a few fixes for memory leaks. There's also a patch in here to allow reading/writing the verified boot context, which depends on a sysfs patch acked by Greg" * tag 'chrome-platform-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/olof/chrome-platform: platform/chrome: Fix i2c-designware adapter name platform/chrome: Support reading/writing the vboot context sysfs: Support is_visible() on binary attributes platform/chrome: cros_ec: Fix possible leak in led_rgb_store() platform/chrome: cros_ec: Fix leak in sequence_store() platform/chrome: Enable Chrome platforms on 64-bit ARM platform/chrome: cros_ec_dev - Add a platform device ID table platform/chrome: cros_ec_lpc - Add support for Google Pixel 2 platform/chrome: cros_ec_lpc - Use existing function to check EC result platform/chrome: Make depends on MFD_CROS_EC instead CROS_EC_PROTO Revert "platform/chrome: Don't make CHROME_PLATFORMS depends on X86 || ARM"
2015-11-13Merge branch 'for-next' of ↵Linus Torvalds4-595/+191
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "This series contains HCH's changes to absorb configfs attribute ->show() + ->store() function pointer usage from it's original tree-wide consumers, into common configfs code. It includes usb-gadget, target w/ drivers, netconsole and ocfs2 changes to realize the improved simplicity, that now renders the original include/target/configfs_macros.h CPP magic for fabric drivers and others, unnecessary and obsolete. And with common code in place, new configfs attributes can be added easier than ever before. Note, there are further improvements in-flight from other folks for v4.5 code in configfs land, plus number of target fixes for post -rc1 code" In the meantime, a new user of the now-removed old configfs API came in through the char/misc tree in commit 7bd1d4093c2f ("stm class: Introduce an abstraction for System Trace Module devices"). This merge resolution comes from Alexander Shishkin, who updated his stm class tracing abstraction to account for the removal of the old show_attribute and store_attribute methods in commit 517982229f78 ("configfs: remove old API") from this pull. As Alexander says about that patch: "There's no need to keep an extra wrapper structure per item and the awkward show_attribute/store_attribute item ops are no longer needed. This patch converts policy code to the new api, all the while making the code quite a bit smaller and easier on the eyes. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>" That patch was folded into the merge so that the tree should be fully bisectable. * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (23 commits) configfs: remove old API ocfs2/cluster: use per-attribute show and store methods ocfs2/cluster: move locking into attribute store methods netconsole: use per-attribute show and store methods target: use per-attribute show and store methods spear13xx_pcie_gadget: use per-attribute show and store methods dlm: use per-attribute show and store methods usb-gadget/f_serial: use per-attribute show and store methods usb-gadget/f_phonet: use per-attribute show and store methods usb-gadget/f_obex: use per-attribute show and store methods usb-gadget/f_uac2: use per-attribute show and store methods usb-gadget/f_uac1: use per-attribute show and store methods usb-gadget/f_mass_storage: use per-attribute show and store methods usb-gadget/f_sourcesink: use per-attribute show and store methods usb-gadget/f_printer: use per-attribute show and store methods usb-gadget/f_midi: use per-attribute show and store methods usb-gadget/f_loopback: use per-attribute show and store methods usb-gadget/ether: use per-attribute show and store methods usb-gadget/f_acm: use per-attribute show and store methods usb-gadget/f_hid: use per-attribute show and store methods ...
2015-11-13Merge branch 'for-linus-3' of ↵Linus Torvalds38-644/+379
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs xattr cleanups from Al Viro. * 'for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: f2fs: xattr simplifications squashfs: xattr simplifications 9p: xattr simplifications xattr handlers: Pass handler to operations instead of flags jffs2: Add missing capability check for listing trusted xattrs hfsplus: Remove unused xattr handler list operations ubifs: Remove unused security xattr handler vfs: Fix the posix_acl_xattr_list return value vfs: Check attribute names in posix acl xattr handers
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-13 21:47:35 +0000