summaryrefslogtreecommitdiff
path: root/fs/ocfs2/dir.c
AgeCommit message (Collapse)AuthorFilesLines
2011-03-28Merge branch 'upstream-linus' of ↵Linus Torvalds1-69/+52
git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2 * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: (39 commits) Treat writes as new when holes span across page boundaries fs,ocfs2: Move o2net_get_func_run_time under CONFIG_OCFS2_FS_STATS. ocfs2/dlm: Move kmalloc() outside the spinlock ocfs2: Make the left masklogs compat. ocfs2: Remove masklog ML_AIO. ocfs2: Remove masklog ML_UPTODATE. ocfs2: Remove masklog ML_BH_IO. ocfs2: Remove masklog ML_JOURNAL. ocfs2: Remove masklog ML_EXPORT. ocfs2: Remove masklog ML_DCACHE. ocfs2: Remove masklog ML_NAMEI. ocfs2: Remove mlog(0) from fs/ocfs2/dir.c ocfs2: remove NAMEI from symlink.c ocfs2: Remove masklog ML_QUOTA. ocfs2: Remove mlog(0) from quota_local.c. ocfs2: Remove masklog ML_RESERVATIONS. ocfs2: Remove masklog ML_XATTR. ocfs2: Remove masklog ML_SUPER. ocfs2: Remove mlog(0) from fs/ocfs2/heartbeat.c ocfs2: Remove mlog(0) from fs/ocfs2/slot_map.c ... Fix up trivial conflict in fs/ocfs2/super.c
2011-03-28Merge branch 'mlog_replace_for_39' of git://repo.or.cz/taoma-kernel into ↵Joel Becker1-64/+45
ocfs2-merge-window-fix
2011-02-23ocfs2: Remove mlog(0) from fs/ocfs2/dir.cTao Ma1-46/+37
This is the 2nd step to remove the debug info of NAMEI. Signed-off-by: Tao Ma <boyu.mt@taobao.com>
2011-03-07ocfs2: Remove EXIT from masklog.Tao Ma1-10/+10
mlog_exit is used to record the exit status of a function. But because it is added in so many functions, if we enable it, the system logs get filled up quickly and cause too much I/O. So actually no one can open it for a production system or even for a test. This patch just try to remove it or change it. So: 1. if all the error paths already use mlog_errno, it is just removed. Otherwise, it will be replaced by mlog_errno. 2. if it is used to print some return value, it is replaced with mlog(0,...). mlog_exit_ptr is changed to mlog(0. All those mlog(0,...) will be replaced with trace events later. Signed-off-by: Tao Ma <boyu.mt@taobao.com>
2011-02-21ocfs2: Remove ENTRY from masklog.Tao Ma1-15/+5
ENTRY is used to record the entry of a function. But because it is added in so many functions, if we enable it, the system logs get filled up quickly and cause too much I/O. So actually no one can open it for a production system or even for a test. So for mlog_entry_void, we just remove it. for mlog_entry(...), we replace it with mlog(0,...), and they will be replace by trace event later. Signed-off-by: Tao Ma <boyu.mt@taobao.com>
2011-02-20ocfs2: optimize ocfs2_check_dir_entry() with unlikely() annotationsTao Ma1-5/+7
In cad3f00, ext4_check_dir_entry was modified by adding some unlikely. Ted described it as "This function gets called a lot for large directories, and the answer is almost always 'no, no, there's no problem'. This means using unlikely() is a good thing." ext3 added the similar change in commit a4ae309. So change it accordingly in ocfs2. Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: Joel Becker <jlbec@evilplan.org>
2011-01-19Kill off warning: ‘inline’ is not at beginning of declarationJesper Juhl1-1/+1
Fix a bunch of warning: ‘inline’ is not at beginning of declaration messages when building a 'make allyesconfig' kernel with -Wextra. These warnings are trivial to kill, yet rather annoying when building with -Wextra. The more we can cut down on pointless crap like this the better (IMHO). A previous patch to do this for a 'allnoconfig' build has already been merged. This just takes the cleanup a little further. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-12-16ocfs2: Hold ip_lock when set/clear flags for indexed dir.Tao Ma1-0/+4
When we set/clear the dyn_features for an inode we hold the ip_lock. So do it when we set/clear OCFS2_INDEXED_DIR_FL also. Signed-off-by: Tao Ma <boyu.mt@taobao.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-09-10Ocfs2: Re-access the journal after ocfs2_insert_extent() in dxdir codes.Tristan Ye1-8/+16
In ocfs2_dx_dir_rebalance(), we need to rejournal_acess the blocks after calling ocfs2_insert_extent() since growing an extent tree may trigger ocfs2_extend_trans(), which makes previous journal_access meaningless. Signed-off-by: Tristan Ye <tristan.ye@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-05-18Merge branch 'discontig-bg' of git://oss.oracle.com/git/tma/linux-2.6 into ↵Joel Becker1-7/+11
ocfs2-merge-window
2010-05-18Ocfs2: Optimize ocfs2 truncate to use ocfs2_remove_btree_range() instead.Tristan Ye1-2/+2
Truncate is just a special case of punching holes(from new i_size to end), we therefore could take advantage of the existing ocfs2_remove_btree_range() to reduce the comlexity and redundancy in alloc.c. The goal here is to make truncate more generic and straightforward. Several functions only used by ocfs2_commit_truncate() will smiply be removed. ocfs2_remove_btree_range() was originally used by the hole punching code, which didn't take refcount trees into account (definitely a bug). We therefore need to change that func a bit to handle refcount trees. It must take the refcount lock, calculate and reserve blocks for refcount tree changes, and decrease refcounts at the end. We replace ocfs2_lock_allocators() here by adding a new func ocfs2_reserve_blocks_for_rec_trunc() which accepts some extra blocks to reserve. This will not hurt any other code using ocfs2_remove_btree_range() (such as dir truncate and hole punching). I merged the following steps into one patch since they may be logically doing one thing, though I know it looks a little bit fat to review. 1). Remove redundant code used by ocfs2_commit_truncate(), since we're moving to ocfs2_remove_btree_range anyway. 2). Add a new func ocfs2_reserve_blocks_for_rec_trunc() for purpose of accepting some extra blocks to reserve. 3). Change ocfs2_prepare_refcount_change_for_del() a bit to fit our needs. It's safe to do this since it's only being called by truncate. 4). Change ocfs2_remove_btree_range() a bit to take refcount case into account. 5). Finally, we change ocfs2_commit_truncate() to call ocfs2_remove_btree_range() in a proper way. The patch has been tested normally for sanity check, stress tests with heavier workload will be expected. Based on this patch, fixing the punching holes bug will be fairly easy. Signed-off-by: Tristan Ye <tristan.ye@oracle.com> Acked-by: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-05-05ocfs2: Add dir_resv_level mount optionMark Fasheh1-2/+4
The default behavior for directory reservations stays the same, but we add a mount option so people can tweak the size of directory reservations according to their workloads. Signed-off-by: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-05-05ocfs2: use allocation reservations for directory dataMark Fasheh1-0/+3
Use the reservations system for unindexed dir tree allocations. We don't bother with the indexed tree as reads from it are mostly random anyway. Directory reservations are marked seperately, to allow the reservations code a chance to optimize their window sizes. This patch allocates only 8 bits for directory windows as they generally are not expected to grow as quickly as file data. Future improvements to dir window sizing can trivially be made. Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2010-05-05ocfs2: Make ocfs2_journal_dirty() void.Joel Becker1-39/+9
jbd[2]_journal_dirty_metadata() only returns 0. It's been returning 0 since before the kernel moved to git. There is no point in checking this error. ocfs2_journal_dirty() has been faithfully returning the status since the beginning. All over ocfs2, we have blocks of code checking this can't fail status. In the past few years, we've tried to avoid adding these checks, because they are pointless. But anyone who looks at our code assumes they are needed. Finally, ocfs2_journal_dirty() is made a void function. All error checking is removed from other files. We'll BUG_ON() the status of jbd2_journal_dirty_metadata() just in case they change it someday. They won't. Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-03-22ocfs2: Free block to the right block group.Tao Ma1-1/+4
In case the block we are going to free is allocated from a discontiguous block group, we have to use suballoc_loc to be the right group. Signed-off-by: Tao Ma <tao.ma@oracle.com>
2010-03-26ocfs2: Set suballoc_loc on allocated metadata.Joel Becker1-3/+4
Get the suballoc_loc from ocfs2_claim_new_inode() or ocfs2_claim_metadata(). Store it on the appropriate field of the block we just allocated. Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-05-06ocfs2: ocfs2_claim_*() don't need an ocfs2_super argument.Joel Becker1-4/+4
They all take an ocfs2_alloc_context, which has the allocation inode. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Tao Ma <tao.ma@oracle.com>
2010-03-05Merge branch 'for_linus' of ↵Linus Torvalds1-21/+16
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: (33 commits) quota: stop using QUOTA_OK / NO_QUOTA dquot: cleanup dquot initialize routine dquot: move dquot initialization responsibility into the filesystem dquot: cleanup dquot drop routine dquot: move dquot drop responsibility into the filesystem dquot: cleanup dquot transfer routine dquot: move dquot transfer responsibility into the filesystem dquot: cleanup inode allocation / freeing routines dquot: cleanup space allocation / freeing routines ext3: add writepage sanity checks ext3: Truncate allocated blocks if direct IO write fails to update i_size quota: Properly invalidate caches even for filesystems with blocksize < pagesize quota: generalize quota transfer interface quota: sb_quota state flags cleanup jbd: Delay discarding buffers in journal_unmap_buffer ext3: quota_write cross block boundary behaviour quota: drop permission checks from xfs_fs_set_xstate/xfs_fs_set_xquota quota: split out compat_sys_quotactl support from quota.c quota: split out netlink notification support from quota.c quota: remove invalid optimization from quota_sync_all ... Fixed trivial conflicts in fs/namei.c and fs/ufs/inode.c
2010-03-05dquot: cleanup space allocation / freeing routinesChristoph Hellwig1-21/+16
Get rid of the alloc_space, free_space, reserve_space, claim_space and release_rsv dquot operations - they are always called from the filesystem and if a filesystem really needs their own (which none currently does) it can just call into it's own routine directly. Move shared logic into the common __dquot_alloc_space, dquot_claim_space_nodirty and __dquot_free_space low-level methods, and rationalize the wrappers around it to move as much as possible code into the common block for CONFIG_QUOTA vs not. Also rename all these helpers to be named dquot_* instead of vfs_dq_*. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
2010-02-26ocfs2: add extent block stealing for ocfs2 v5Tiger Yang1-1/+1
This patch add extent block (metadata) stealing mechanism for extent allocation. This mechanism is same as the inode stealing. if no room in slot specific extent_alloc, we will try to allocate extent block from the next slot. Signed-off-by: Tiger Yang <tiger.yang@oracle.com> Acked-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
2009-09-04ocfs2: Pass ocfs2_caching_info into ocfs_init_*_extent_tree().Joel Becker1-6/+9
With this commit, extent tree operations are divorced from inodes and rely on ocfs2_caching_info. Phew! Signed-off-by: Joel Becker <joel.becker@oracle.com>
2009-09-04ocfs2: ocfs2_insert_extent() no longer needs struct inode.Joel Becker1-7/+5
One more function down, no inode in the entire insert-extent chain. Signed-off-by: Joel Becker <joel.becker@oracle.com>
2009-09-04ocfs2: ocfs2_find_path() only needs the caching infoJoel Becker1-1/+2
ocfs2_find_path and ocfs2_find_leaf() walk our btrees, reading extent blocks. They need struct ocfs2_caching_info for that, but not struct inode. Signed-off-by: Joel Becker <joel.becker@oracle.com>
2009-09-04ocfs2: Pass ocfs2_caching_info to ocfs2_read_extent_block().Joel Becker1-1/+1
extent blocks belong to btrees on more than just inodes, so we want to pass the ocfs2_caching_info structure directly to ocfs2_read_extent_block(). A number of places in alloc.c can now drop struct inode from their argument list. Signed-off-by: Joel Becker <joel.becker@oracle.com>
2009-09-04ocfs2: Pass struct ocfs2_caching_info to the journal functions.Joel Becker1-23/+29
The next step in divorcing metadata I/O management from struct inode is to pass struct ocfs2_caching_info to the journal functions. Thus the journal locks a metadata cache with the cache io_lock function. It also can compare ci_last_trans and ci_created_trans directly. This is a large patch because of all the places we change ocfs2_journal_access..(handle, inode, ...) to ocfs2_journal_access..(handle, INODE_CACHE(inode), ...). Signed-off-by: Joel Becker <joel.becker@oracle.com>
2009-09-04ocfs2: Take the inode out of the metadata read/write paths.Joel Becker1-10/+13
We are really passing the inode into the ocfs2_read/write_blocks() functions to get at the metadata cache. This commit passes the cache directly into the metadata block functions, divorcing them from the inode. Signed-off-by: Joel Becker <joel.becker@oracle.com>
2009-06-03ocfs2: Correct ordering of ip_alloc_sem and localloc locks for directoriesJan Kara1-11/+10
We use ordering ip_alloc_sem -> local alloc locks in ocfs2_write_begin(). So change lock ordering in ocfs2_extend_dir() and ocfs2_expand_inline_dir() to also use this lock ordering. Signed-off-by: Jan Kara <jack@suse.cz> Acked-by: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
2009-04-21ocfs2: Fix 2 warning during ocfs2 make.Tao Ma1-1/+1
fs/ocfs2/dir.c: In function ‘ocfs2_extend_dir’: fs/ocfs2/dir.c:2700: warning: ‘ret’ may be used uninitialized in this function fs/ocfs2/suballoc.c: In function ‘ocfs2_get_suballoc_slot_bit’: fs/ocfs2/suballoc.c:2216: warning: comparison is always true due to limited range of data type Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
2009-04-07ocfs2: Reserve 1 more cluster in expanding_inline_dir for indexed dir.Tao Ma1-1/+1
In ocfs2_expand_inline_dir, we calculate whether we need 1 extra cluster if we can't store the dx inline the root and save it in dx_alloc. So add it when we call ocfs2_reserve_clusters. Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-04-03ocfs2: fix leaf start calculation in ocfs2_dx_dir_rebalance()Mark Fasheh1-2/+1
ocfs2_dx_dir_rebalance() is passed the block offset of a dx leaf which needs rebalancing. Since we rebalance an entire cluster at a time however, this function needs to calculate the beginning of that cluster, in blocks. The calculation was wrong, which would result in a read of non-leaf blocks. Fix the calculation by adding ocfs2_block_to_cluster_start() which is a more straight-forward way of determining this. Reported-by: Tristan Ye <tristan.ye@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-04-03ocfs2: Add total entry count to dx_root_blockMark Fasheh1-43/+119
This little bit of extra accounting speeds up ocfs2_empty_dir() dramatically by allowing us to short-circuit the full directory scan. Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-04-03ocfs2: Introduce dir free space listMark Fasheh1-86/+472
The only operation which doesn't get faster with directory indexing is insert, which still has to walk the entire unindexed directory portion to find a free block. This patch provides an improvement in directory insert performance by maintaining a singly linked list of directory leaf blocks which have space for additional dirents. Signed-off-by: Mark Fasheh <mfasheh@suse.com> Acked-by: Joel Becker <joel.becker@oracle.com>
2009-04-03ocfs2: Store dir index records inlineMark Fasheh1-138/+434
Allow us to store a small number of directory index records in the ocfs2_dx_root_block. This saves us a disk read on small to medium sized directories (less than about 250 entries). The inline root is automatically turned into a root block with extents if the directory size increases beyond it's capacity. Signed-off-by: Mark Fasheh <mfasheh@suse.com> Acked-by: Joel Becker <joel.becker@oracle.com>
2009-04-03ocfs2: Add a name indexed b-tree to directory inodesMark Fasheh1-63/+1845
This patch makes use of Ocfs2's flexible btree code to add an additional tree to directory inodes. The new tree stores an array of small, fixed-length records in each leaf block. Each record stores a hash value, and pointer to a block in the traditional (unindexed) directory tree where a dirent with the given name hash resides. Lookup exclusively uses this tree to find dirents, thus providing us with constant time name lookups. Some of the hashing code was copied from ext3. Unfortunately, it has lots of unfixed checkpatch errors. I left that as-is so that tracking changes would be easier. Signed-off-by: Mark Fasheh <mfasheh@suse.com> Acked-by: Joel Becker <joel.becker@oracle.com>
2009-04-03ocfs2: Introduce dir lookup helper structMark Fasheh1-45/+54
Many directory manipulation calls pass around a tuple of dirent, and it's containing buffer_head. Dir indexing has a bit more state, but instead of adding yet more arguments to functions, we introduce 'struct ocfs2_dir_lookup_result'. In this patch, it simply holds the same tuple, but future patches will add more state. Signed-off-by: Mark Fasheh <mfasheh@suse.com> Acked-by: Joel Becker <joel.becker@oracle.com>
2009-01-05ocfs2: Checksum and ECC for directory blocks.Joel Becker1-2/+35
Use the db_check field of ocfs2_dir_block_trailer to crc/ecc the dirblocks. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05ocfs2: Add directory block trailers.Mark Fasheh1-14/+183
Future ocfs2 features metaecc and indexed directories need to store a little bit of data in each dirblock. For compatibility, we place this in a trailer at the end of the dirblock. The trailer plays itself as an empty dirent, so that if the features are turned off, it can be reused without requiring a tunefs scan. This code adds the trailer and validates it when the block is read in. [ Mark is the original author, but I reinserted this code before his dir index work. -- Joel ] Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05ocfs2: Use metadata-specific ocfs2_journal_access_*() functions.Joel Becker1-17/+31
The per-metadata-type ocfs2_journal_access_*() functions hook up jbd2 commit triggers and allow us to compute metadata ecc right before the buffers are written out. This commit provides ecc for inodes, extent blocks, group descriptors, and quota blocks. It is not safe to use extened attributes and metaecc at the same time yet. The ocfs2_extent_tree and ocfs2_path abstractions in alloc.c both hide the type of block at their root. Before, it didn't matter, but now the root block must use the appropriate ocfs2_journal_access_*() function. To keep this abstract, the structures now have a pointer to the matching journal_access function and a wrapper call to call it. A few places use naked ocfs2_write_block() calls instead of adding the blocks to the journal. We make sure to calculate their checksum and ecc before the write. Since we pass around the journal_access functions. Let's typedef them in ocfs2.h. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05ocfs2: Add quota calls for allocation and freeing of inodes and spaceJan Kara1-2/+22
Add quota calls for allocation and freeing of inodes and space, also update estimates on number of needed credits for a transaction. Move out inode allocation from ocfs2_mknod_locked() because vfs_dq_init() must be called outside of a transaction. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05ocfs2: Convert ocfs2_read_dir_block() to ocfs2_read_virt_blocks()Joel Becker1-33/+5
Now that we've centralized the ocfs2_read_virt_blocks() code, let's use it in ocfs2_read_dir_block(). Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05ocfs2: Validate metadata only when it's read from disk.Joel Becker1-9/+4
Add an optional validation hook to ocfs2_read_blocks(). Now the validation function is only called when a block was actually read off of disk. It is not called when the buffer was in cache. We add a buffer state bit BH_NeedsValidate to flag these buffers. It must always be one higher than the last JBD2 buffer state bit. The dinode, dirblock, extent_block, and xattr_block validators are lifted to this scheme directly. The group_descriptor validator needs to be split into two pieces. The first part only needs the gd buffer and is passed to ocfs2_read_block(). The second part requires the dinode as well, and is called every time. It's only 3 compares, so it's tiny. This also allows us to clean up the non-fatal gd check used by resize.c. It now has no magic argument. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05ocfs2: Wrap dirblock reads in a dedicated function.Joel Becker1-62/+88
We have ocfs2_bread() as a vestige of the original ext-based dir code. It's only used by directories, though. Turn it into ocfs2_read_dir_block(), with a prototype matching the other metadata read functions. It's set up to validate dirblocks when the time comes. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05ocfs2: Wrap inode block reads in a dedicated function.Joel Becker1-3/+3
The ocfs2 code currently reads inodes off disk with a simple ocfs2_read_block() call. Each place that does this has a different set of sanity checks it performs. Some check only the signature. A couple validate the block number (the block read vs di->i_blkno). A couple others check for VALID_FL. Only one place validates i_fs_generation. A couple check nothing. Even when an error is found, they don't all do the same thing. We wrap inode reading into ocfs2_read_inode_block(). This will validate all the above fields, going readonly if they are invalid (they never should be). ocfs2_read_inode_block_full() is provided for the places that want to pass read_block flags. Every caller is passing a struct inode with a valid ip_blkno, so we don't need a separate blkno argument either. We will remove the validation checks from the rest of the code in a later commit, as they are no longer necessary. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-10-14ocfs2: Make cached block reads the common case.Joel Becker1-1/+1
ocfs2_read_blocks() currently requires the CACHED flag for cached I/O. However, that's the common case. Let's flip it around and provide an IGNORE_CACHE flag for the special users. This has the added benefit of cleaning up the code some (ignore_cache takes on its special meaning earlier in the loop). Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-10-14ocfs2: Kill the last naked wait_on_buffer() for cached reads.Joel Becker1-4/+3
ocfs2's cached buffer I/O goes through ocfs2_read_block(s)(). dir.c had a naked wait_on_buffer() to wait for some readahead, but it should use ocfs2_read_block() instead. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-10-14ocfs2: Move ocfs2_bread() into dir.cJoel Becker1-0/+43
dir.c is the only place using ocfs2_bread(), so let's make it static to that file. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-10-14ocfs2: Simplify ocfs2_read_block()Joel Becker1-6/+3
More than 30 callers of ocfs2_read_block() pass exactly OCFS2_BH_CACHED. Only six pass a different flag set. Rather than have every caller care, let's make ocfs2_read_block() take no flags and always do a cached read. The remaining six places can call ocfs2_read_blocks() directly. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-10-14ocfs2: Require an inode for ocfs2_read_block(s)().Joel Becker1-6/+6
Now that synchronous readers are using ocfs2_read_blocks_sync(), all callers of ocfs2_read_blocks() are passing an inode. Use it unconditionally. Since it's there, we don't need to pass the ocfs2_super either. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-10-13ocfs2: Don't check for NULL before brelse()Mark Fasheh1-16/+8
This is pointless as brelse() already does the check. Signed-off-by: Mark Fasheh
2008-10-13ocfs2: Change ocfs2_get_*_extent_tree() to ocfs2_init_*_extent_tree()Joel Becker1-4/+2
The original get/put_extent_tree() functions held a reference on et_root_bh. However, every single caller already has a safe reference, making the get/put cycle irrelevant. We change ocfs2_get_*_extent_tree() to ocfs2_init_*_extent_tree(). It no longer gets a reference on et_root_bh. ocfs2_put_extent_tree() is removed. Callers now have a simpler init+use pattern. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-23 08:14:38 +0000