Age | Commit message (Collapse) | Author | Files | Lines |
|
Change the atomic_t in struct nfs_server to atomic_long_t in anticipation
of machines that can handle 8+TB of (4K) pages under writeback.
However I suspect other things in NFS will start going *bang* by then.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Remove includes of <linux/smp_lock.h> where it is not used/needed.
Suggested by Al Viro.
Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc,
sparc64, and arm (all 59 defconfigs).
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
* 'server-cluster-locking-api' of git://linux-nfs.org/~bfields/linux:
gfs2: nfs lock support for gfs2
lockd: add code to handle deferred lock requests
lockd: always preallocate block in nlmsvc_lock()
lockd: handle test_lock deferrals
lockd: pass cookie in nlmsvc_testlock
lockd: handle fl_grant callbacks
lockd: save lock state on deferral
locks: add fl_grant callback for asynchronous lock return
nfsd4: Convert NFSv4 to new lock interface
locks: add lock cancel command
locks: allow {vfs,posix}_lock_file to return conflicting lock
locks: factor out generic/filesystem switch from setlock code
locks: factor out generic/filesystem switch from test_lock
locks: give posix_test_lock same interface as ->lock
locks: make ->lock release private data before returning in GETLK case
locks: create posix-to-flock helper functions
locks: trivial removal of unnecessary parentheses
|
|
I have never seen a use of SLAB_DEBUG_INITIAL. It is only supported by
SLAB.
I think its purpose was to have a callback after an object has been freed
to verify that the state is the constructor state again? The callback is
performed before each freeing of an object.
I would think that it is much easier to check the object state manually
before the free. That also places the check near the code object
manipulation of the object.
Also the SLAB_DEBUG_INITIAL callback is only performed if the kernel was
compiled with SLAB debugging on. If there would be code in a constructor
handling SLAB_DEBUG_INITIAL then it would have to be conditional on
SLAB_DEBUG otherwise it would just be dead code. But there is no such code
in the kernel. I think SLUB_DEBUG_INITIAL is too problematic to make real
use of, difficult to understand and there are easier ways to accomplish the
same effect (i.e. add debug code before kfree).
There is a related flag SLAB_CTOR_VERIFY that is frequently checked to be
clear in fs inode caches. Remove the pointless checks (they would even be
pointless without removeal of SLAB_DEBUG_INITIAL) from the fs constructors.
This is the last slab flag that SLUB did not support. Remove the check for
unimplemented flags from SLUB.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Ensure pages are uptodate after returning from read_cache_page, which allows
us to cut out most of the filesystem-internal PageUptodate calls.
I didn't have a great look down the call chains, but this appears to fixes 7
possible use-before uptodate in hfs, 2 in hfsplus, 1 in jfs, a few in
ecryptfs, 1 in jffs2, and a possible cleared data overwritten with readpage in
block2mtd. All depending on whether the filler is async and/or can return
with a !uptodate page.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
posix_test_lock() and ->lock() do the same job but have gratuitously
different interfaces. Modify posix_test_lock() so the two agree,
simplifying some code in the process.
Signed-off-by: Marc Eshel <eshel@almaden.ibm.com>
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
|
|
The file_lock argument to ->lock is used to return the conflicting lock
when found. There's no reason for the filesystem to return any private
information with this conflicting lock, but nfsv4 is.
Fix nfsv4 client, and modify locks.c to stop calling fl_release_private
for it in this case.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Cc: "Trond Myklebust" <Trond.Myklebust@netapp.com>"
|
|
fs/nfs/pagelist.c:226: error: conflicting types for 'nfs_pageio_init'
include/linux/nfs_page.h:80: error: previous declaration of 'nfs_pageio_init' was here
Thanks to Andrew for spotting this...
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Remove some stale comments about hard limits which went away in 2.5.
Signed-off-by: Jason Uhlenkott <juhlenko@akamai.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
The ACL that the server sets may not be exactly the one we set--for
example, it may silently turn off bits that it does not support. So we
should remove any cached ACL so that any subsequent request for the ACL
will go to the server.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Try running this script in an NFS mounted directory (Client relatively
recent - 2.6.18 has the problem as does 2.6.20).
------------------------------------------------------
#!/bin/bash
#
# This script will produce the following errormessage from tar:
#
# tar: newdir/innerdir/innerfile: file changed as we read it
# create dirs
rm -rf nfstest
mkdir -p nfstest/dir/innerdir
# create files (should not be empty)
echo "Hello World!" >nfstest/dir/file
echo "Hello World!" >nfstest/dir/innerdir/innerfile
# problem only happens if we sleep before chmod
sleep 1
# change file modes
chmod -R a+r nfstest
# rename dir
mv nfstest/dir nfstest/newdir
# tar it
tar -cf nfstest/nfstest.tar -C nfstest newdir
# restore old dir name
mv nfstest/newdir nfstest/dir
--------------------------------------------------------
What happens:
The 'chmod -R' does a readdir_plus in each directory and the results
get cached in the page cache. It then updates the ctime on each file
by one second. When this happens, the post-op attributes are used to
update the ctime stored on the client to match the value in the kernel.
The 'mv' calls shrink_dcache_parent on the directory tree which
flushes all the dentries (so a new lookup will be required) but
doesn't flush the inodes or pagecache.
The 'tar' does a readdir on each directory, but (in the case of
'innerdir' at least) satisfies it from the pagecache and uses the
READDIRPLUS data to update all the inodes. In the case of
'innerdir/innerfile', the ctime is out of date.
'tar' then calls 'lstat' on innerdir/innerfile getting an old ctime.
It then opens the file (triggering a GETATTR), reads the content, and
then calls fstat to see if anything has changed. It finds that ctime
has changed and so complains.
The problem seems to be that the cache readdirplus info is kept around
for too long.
My patch below discards pagecache data for directories when
dentry_iput is called on them. This effectively removes the symptom
which convinces me that I correctly understand the problem. However
I'm not convinced that is a proper solution, as there could easily be
other races that trigger the same problem without being affected by
this 'fix'.
One possibility would be to require that readdirplus pagecache data be
only used *once* to instantiate an inode. Somehow it should then be
invalidated so that if the dentry subsequently disappears, it will
cause a new request to the server to fill in the stat data.
Another possibility is to compare the cache_change_attribute on the
inode with something similar for the readdirplus info and reject the
info from readdirplus if it is too old.
I haven't tried to implement these and would value other opinions
before I do.
Thanks,
NeilBrown
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Don't use uninitialsed value for fattr->time_start in readdirplus results.
The 'fattr' structure filled in by nfs3_decode_direct does not get a
value for ->time_start set.
Thus if an entry is for an inode that we already have in cache,
when nfs_readdir_lookup calls nfs_fhget, it will call nfs_refresh_inode
and may update the inode with out-of-date information.
Directories are read a page at a time, so each page could have a
different timestamp that "should" be used to set the time_start for
the fattr for info in that page. However storing the timestamp per
page is awkward. (We could stick in the first 4 bytes and only read 4092
bytes, but that is a bigger code change than I am interested it).
This patch ignores the readdir_plus attributes if a readdir finds the
information already in cache, and otherwise sets ->time_start to the time
the readdir request was sent to the server.
It might be nice to store - in the directory inode - the time stamp for
the earliest readdir request that is still in the page cache, so that we
don't ignore attribute data that we don't have to. This patch doesn't do
that.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
READDIRPLUS can be a performance hindrance when the client is working with
large directories. In addition, some servers still have bugs in their
implementations (e.g. Tru64 returns wrong values for the fsid).
Add a mount flag to enable users to turn it off at mount time following the
implementation in Apple's NFS client.
Signed-off-by: Steve Dickson <steved@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
It is arguable whether NFSROOT will support IPv6, and thus whether
rpcb_getport_external needs to support rpcbind versions greater than 2.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
The RPC buffer size estimation logic in net/sunrpc/clnt.c always
significantly overestimates the requirements for the buffer size.
A little instrumentation demonstrated that in fact rpc_malloc was never
allocating the buffer from the mempool, but almost always called kmalloc.
To compute the size of the RPC buffer more precisely, split p_bufsiz into
two fields; one for the argument size, and one for the result size.
Then, compute the sum of the exact call and reply header sizes, and split
the RPC buffer precisely between the two. That should keep almost all RPC
buffers within the 2KiB buffer mempool limit.
And, we can finally be rid of RPC_SLACK_SPACE!
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
It has no business touching wbc->pages_skipped.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Currently we do write coalescing in a very inefficient manner: one pass in
generic_writepages() in order to lock the pages for writing, then one pass
in nfs_flush_mapping() and/or nfs_sync_mapping_wait() in order to gather
the locked pages for coalescing into RPC requests of size "wsize".
In fact, it turns out there is actually a deadlock possible here since we
only start I/O on the second pass. If the user signals the process while
we're in nfs_sync_mapping_wait(), for instance, then we may exit before
starting I/O on all the requests that have been queued up.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Do the coalescing of read requests into block sized requests at start of
I/O as we scan through the pages instead of going through a second pass.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
It is redundant, and will interfere with the call to
balance_dirty_pages_ratelimited_nr in generic_file_write().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
The nfs statfs function returns a success code on error, and fills the
output buffer with invalid values. The attached patch makes it return a
correct error code instead.
Signed-off-by: Amnon Aaronsohn <amnonaar@gmail.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
(Modified patch to reinstate the dprintk())
|
|
Be more careful about testing page->mapping.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Protect nfs_set_page_dirty() against races with nfs_inode_add_request.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Redirtying a request that is already marked for commit will screw up the
accounting for NR_UNSTABLE_NFS as well as nfs_i.ncommit.
Ensure that all requests on the commit queue are labelled with the
PG_NEED_COMMIT flag, and avoid moving them onto the dirty list inside
nfs_page_mark_flush().
Also inline nfs_mark_request_dirty() into nfs_page_mark_flush() for
atomicity reasons. Avoid dropping the spinlock until we're done marking the
request in the radix tree and have added it to the ->dirty list.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Ensure that we don't release the PG_writeback lock until after the page has
either been redirtied, or queued on the nfs_inode 'commit' list.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Get rid of the inlined #ifdefs.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We must remove the request from whatever list it is currently on before we
can add it to the dirty list.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If the writebacks are cancelled via nfs_cancel_dirty_list, or due to the
memory allocation failing in nfs_flush_one/nfs_flush_multi, then we must
ensure that the PG_writeback flag is cleared.
Also ensure that we actually own the PG_writeback flag whenever we
schedule a new writeback by making nfs_set_page_writeback() return the
value of test_set_page_writeback().
The PG_writeback page flag ends up replacing the functionality of the
PG_FLUSHING nfs_page flag, so we rip that out too.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Do not flag an error if the COMMIT call fails and we decide to resend the
writes. Let the resend flag the error if it fails.
If a write has failed, then nfs_direct_write_result should not attempt to
send a commit. It should just exit asap and return the error to the user.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
It looks like nfs_setattr() and nfs_rename() also need to test whether the
target is a regular file before calling nfs_wb_all()...
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
non-regular files
Looks like we need a check in nfs_getattr() for a regular file. It makes
no sense to call nfs_sync_mapping_range() on anything else. I think that
should fix your problem: it will stop the NFS client from interfering
with dirty pages on that inode's mapping.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Olof Johansson <olof@lixom.net>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The current NFS client congestion logic is severly broken, it marks the
backing device congested during each nfs_writepages() call but doesn't
mirror this in nfs_writepage() which makes for deadlocks. Also it
implements its own waitqueue.
Replace this by a more regular congestion implementation that puts a cap on
the number of active writeback pages and uses the bdi congestion waitqueue.
Also always use an interruptible wait since it makes sense to be able to
SIGKILL the process even for mounts without 'intr'.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The semantic effect of insert_at_head is that it would allow new registered
sysctl entries to override existing sysctl entries of the same name. Which is
pain for caching and the proc interface never implemented.
I have done an audit and discovered that none of the current users of
register_sysctl care as (excpet for directories) they do not register
duplicate sysctl entries.
So this patch simply removes the support for overriding existing entries in
the sys_sysctl interface since no one uses it or cares and it makes future
enhancments harder.
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: David Howells <dhowells@redhat.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Andi Kleen <ak@muc.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Corey Minyard <minyard@acm.org>
Cc: Neil Brown <neilb@suse.de>
Cc: "John W. Linville" <linville@tuxdriver.com>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Jan Kara <jack@ucw.cz>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Mark Fasheh <mark.fasheh@oracle.com>
Cc: David Chinner <dgc@sgi.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Patrick McHardy <kaber@trash.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
After Al Viro (finally) succeeded in removing the sched.h #include in module.h
recently, it makes sense again to remove other superfluous sched.h includes.
There are quite a lot of files which include it but don't actually need
anything defined in there. Presumably these includes were once needed for
macros that used to live in sched.h, but moved to other header files in the
course of cleaning it up.
To ease the pain, this time I did not fiddle with any header files and only
removed #includes from .c-files, which tend to cause less trouble.
Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha,
arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig,
allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all
configs in arch/arm/configs on arm. I also checked that no new warnings were
introduced by the patch (actually, some warnings are removed that were emitted
by unnecessarily included header files).
Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Conflicts:
net/sunrpc/auth_gss/gss_krb5_crypto.c
net/sunrpc/auth_gss/gss_spkm3_token.c
net/sunrpc/clnt.c
Merge with mainline and fix conflicts.
|
|
RFC3530 section 3.1.1 states an NFSv4 client MUST NOT send a request
twice on the same connection unless it is the NULL procedure. Section
3.1.1 suggests that the client should disconnect and reconnect if it
wants to retry a request.
Implement this by adding an rpc_clnt flag that an ULP can use to
specify that the underlying transport should be disconnected on a
major timeout. The NFSv4 client asserts this new flag, and requests
no retries after a minor retransmit timeout.
Note that disconnecting on a retransmit is in general not safe to do
if the RPC client does not reuse the TCP port number when reconnecting.
See http://bugzilla.linux-nfs.org/show_bug.cgi?id=6
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
ClearPageUptodate() will just cause races here. What we really want to do
is to invalidate the page cache.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Micro-optimisations for nfs_fhget() and nfs_wcc_update_inode().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
Fix wraparound issue with nfsi->cache_change_attribute. If it is found
to lie in the future, then update it to lie in the past. Patch based on
a suggestion by Neil Brown.
..and minor micro-optimisation: avoid reading 'jiffies' more than once in
nfs_update_inode().
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|
|
This patch is inspired by Arjan's "Patch series to mark struct
file_operations and struct inode_operations const".
Compile tested with gcc & sparse.
Signed-off-by: Josef 'Jeff' Sipek <jsipek@cs.sunysb.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Many struct inode_operations in the kernel can be "const". Marking them const
moves these to the .rodata section, which avoids false sharing with potential
dirty data. In addition it'll catch accidental writes at compile time to
these shared resources.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Many struct file_operations in the kernel can be "const". Marking them const
moves these to the .rodata section, which avoids false sharing with potential
dirty data. In addition it'll catch accidental writes at compile time to
these shared resources.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
NFS_SUPER_MAGIC is already defined in include/linux/magic.h
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Expand the rq_addr field to allow it to contain larger addresses.
Specifically, we replace a 'sockaddr_in' with a 'sockaddr_storage', then
everywhere the 'sockaddr_in' was referenced, we use instead an accessor
function (svc_addr_in) which safely casts the _storage to _in.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
for printing
There are loads of places where the RPC server assumes that the rq_addr fields
contains an IPv4 address. Top among these are error and debugging messages
that display the server's IP address.
Let's refactor the address printing into a separate function that's smart
enough to figure out the difference between IPv4 and IPv6 addresses.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
with portmapper
Sometimes we need to create an RPC service but not register it with the local
portmapper. NFSv4 delegation callback, for example.
Change the svc_makesock() API to allow optionally creating temporary or
permanent sockets, optionally registering with the local portmapper, and make
it return the ephemeral port of the new socket.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
|