summaryrefslogtreecommitdiff
path: root/fs/buffer.c
AgeCommit message (Collapse)AuthorFilesLines
2008-01-28Add buffer head related helper functionsAneesh Kumar K.V1-0/+44
Add buffer head related helper function bh_uptodate_or_lock and bh_submit_read which can be used by file system Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2007-10-21nobh: nobh_write_end fixNick Piggin1-2/+1
This path mustn't have been tested :( I did attempt to exercise it by injecting failures here, but I suspect PageMappedToDisk may have been getting in the way. Will need more of a look, although I think nobh mode is OK for an -rc1 (it shouldn't eat anyone's data). Commit 03158cd7eb3374843de68421142ca5900df845d9 ("fs: restore nobh") introcduced a NULL deref. Spotted by the Coverity checker. Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Badari Pulavarty <pbadari@us.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17writeback: remove pages_skipped accounting in __block_write_full_page()Fengguang Wu1-1/+0
Miklos Szeredi <miklos@szeredi.hu> and me identified a writeback bug: > The following strange behavior can be observed: > > 1. large file is written > 2. after 30 seconds, nr_dirty goes down by 1024 > 3. then for some time (< 30 sec) nothing happens (disk idle) > 4. then nr_dirty again goes down by 1024 > 5. repeat from 3. until whole file is written > > So basically a 4Mbyte chunk of the file is written every 30 seconds. > I'm quite sure this is not the intended behavior. It can be produced by the following test scheme: # cat bin/test-writeback.sh grep nr_dirty /proc/vmstat echo 1 > /proc/sys/fs/inode_debug dd if=/dev/zero of=/var/x bs=1K count=204800& while true; do grep nr_dirty /proc/vmstat; sleep 1; done # bin/test-writeback.sh nr_dirty 19207 nr_dirty 19207 nr_dirty 30924 204800+0 records in 204800+0 records out 209715200 bytes (210 MB) copied, 1.58363 seconds, 132 MB/s nr_dirty 47150 nr_dirty 47141 nr_dirty 47142 nr_dirty 47142 nr_dirty 47142 nr_dirty 47142 nr_dirty 47205 nr_dirty 47214 nr_dirty 47214 nr_dirty 47214 nr_dirty 47214 nr_dirty 47214 nr_dirty 47215 nr_dirty 47216 nr_dirty 47216 nr_dirty 47216 nr_dirty 47154 nr_dirty 47143 nr_dirty 47143 nr_dirty 47143 nr_dirty 47143 nr_dirty 47143 nr_dirty 47142 nr_dirty 47142 nr_dirty 47142 nr_dirty 47142 nr_dirty 47134 nr_dirty 47134 nr_dirty 47135 nr_dirty 47135 nr_dirty 47135 nr_dirty 46097 <== -1038 nr_dirty 46098 nr_dirty 46098 nr_dirty 46098 [...] nr_dirty 46091 nr_dirty 46092 nr_dirty 46092 nr_dirty 45069 <== -1023 nr_dirty 45056 nr_dirty 45056 nr_dirty 45056 [...] nr_dirty 37822 nr_dirty 36799 <== -1023 [...] nr_dirty 36781 nr_dirty 35758 <== -1023 [...] nr_dirty 34708 nr_dirty 33672 <== -1024 [...] nr_dirty 33692 nr_dirty 32669 <== -1023 % ls -li /var/x 847824 -rw-r--r-- 1 root root 200M 2007-08-12 04:12 /var/x % dmesg|grep 847824 # generated by a debug printk [ 529.263184] redirtied inode 847824 line 548 [ 564.250872] redirtied inode 847824 line 548 [ 594.272797] redirtied inode 847824 line 548 [ 629.231330] redirtied inode 847824 line 548 [ 659.224674] redirtied inode 847824 line 548 [ 689.219890] redirtied inode 847824 line 548 [ 724.226655] redirtied inode 847824 line 548 [ 759.198568] redirtied inode 847824 line 548 # line 548 in fs/fs-writeback.c: 543 if (wbc->pages_skipped != pages_skipped) { 544 /* 545 * writeback is not making progress due to locked 546 * buffers. Skip this inode for now. 547 */ 548 redirty_tail(inode); 549 } More debug efforts show that __block_write_full_page() never has the chance to call submit_bh() for that big dirty file: the buffer head is *clean*. So basicly no page io is issued by __block_write_full_page(), hence pages_skipped goes up. Also the comment in generic_sync_sb_inodes(): 544 /* 545 * writeback is not making progress due to locked 546 * buffers. Skip this inode for now. 547 */ and the comment in __block_write_full_page(): 1713 /* 1714 * The page was marked dirty, but the buffers were 1715 * clean. Someone wrote them back by hand with 1716 * ll_rw_block/submit_bh. A rare case. 1717 */ do not quite agree with each other. The page writeback should be skipped for 'locked buffer', but here it is 'clean buffer'! This patch fixes this bug. Though I'm not sure why __block_write_full_page() is called only to do nothing and who actually issued the writeback for us. This is the two possible new behaviors after the patch: 1) pretty nice: wait 30s and write ALL:) 2) not so good: - during the dd: ~16M - after 30s: ~4M - after 5s: ~4M - after 5s: ~176M The next patch will fix case (2). Cc: David Chinner <dgc@sgi.com> Cc: Ken Chen <kenchen@google.com> Signed-off-by: Fengguang Wu <wfg@mail.ustc.edu.cn> Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17mm: count reclaimable pages per BDIPeter Zijlstra1-0/+2
Count per BDI reclaimable pages; nr_reclaimable = nr_dirty + nr_unstable. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16Group short-lived and reclaimable kernel allocationsMel Gorman1-1/+2
This patch marks a number of allocations that are either short-lived such as network buffers or are reclaimable such as inode allocations. When something like updatedb is called, long-lived and unmovable kernel allocations tend to be spread throughout the address space which increases fragmentation. This patch groups these allocations together as much as possible by adding a new MIGRATE_TYPE. The MIGRATE_RECLAIMABLE type is for allocations that can be reclaimed on demand, but not moved. i.e. they can be migrated by deleting them and re-reading the information from elsewhere. Signed-off-by: Mel Gorman <mel@csn.ul.ie> Cc: Andy Whitcroft <apw@shadowen.org> Cc: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16fs: restore nobhNick Piggin1-79/+150
Implement nobh in new aops. This is a bit tricky. FWIW, nobh_truncate is now implemented in a way that does not create blocks in sparse regions, which is a silly thing for it to have been doing (isn't it?) ext2 survives fsx and fsstress. jfs is converted as well... ext3 should be easy to do (but not done yet). [akpm@linux-foundation.org: coding-style fixes] Cc: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16With reiserfs no longer using the weird generic_cont_expand, remove it ↵Nick Piggin1-20/+0
completely. Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16fs: new cont helpersNick Piggin1-100/+94
Rework the generic block "cont" routines to handle the new aops. Supporting cont_prepare_write would take quite a lot of code to support, so remove it instead (and we later convert all filesystems to use it). write_begin gets passed AOP_FLAG_CONT_EXPAND when called from generic_cont_expand, so filesystems can avoid the old hacks they used. Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16fs: introduce write_begin, write_end, and perform_write aopsNick Piggin1-32/+169
These are intended to replace prepare_write and commit_write with more flexible alternatives that are also able to avoid the buffered write deadlock problems efficiently (which prepare_write is unable to do). [mark.fasheh@oracle.com: API design contributions, code review and fixes] [akpm@linux-foundation.org: various fixes] [dmonakhov@sw.ru: new aop block_write_begin fix] Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Dmitriy Monakhov <dmonakhov@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16fs: fix data-loss on errorNick Piggin1-0/+2
New buffers against uptodate pages are simply be marked uptodate, while the buffer_new bit remains set. This causes error-case code to zero out parts of those buffers because it thinks they contain stale data: wrong, they are actually uptodate so this is a data loss situation. Fix this by actually clearning buffer_new and marking the buffer dirty. It makes sense to always clear buffer_new before setting a buffer uptodate. Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16fs: fix nobh error handlingNick Piggin1-56/+82
nobh mode error handling is not just pretty slack, it's wrong. One cannot zero out the whole page to ensure new blocks are zeroed, because it just brings the whole page "uptodate" with zeroes even if that may not be the correct uptodate data. Also, other parts of the page may already contain dirty data which would get lost by zeroing it out. Thirdly, the writeback of zeroes to the new blocks will also erase existing blocks. All these conditions are pagecache and/or filesystem corruption. The problem comes about because we didn't keep track of which buffers actually are new or old. However it is not enough just to keep only this state, because at the point we start dirtying parts of the page (new blocks, with zeroes), the handling of IO errors becomes impossible without buffers because the page may only be partially uptodate, in which case the page flags allone cannot capture the state of the parts of the page. So allocate all buffers for the page upfront, but leave them unattached so that they don't pick up any other references and can be freed when we're done. If the error path is hit, then zero the new buffers as the regular buffer path does, then attach the buffers to the page so that it can actually be written out correctly and be subject to the normal IO error handling paths. As an upshot, we save 1K of kernel stack on ia64 or powerpc 64K page systems. Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16mm: add end_buffer_read helper functionDmitry Monakhov1-15/+17
Move duplicated code from end_buffer_read_XXX methods to separate helper function. Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-10Drop 'size' argument from bio_endio and bi_end_ioNeilBrown1-5/+1
As bi_end_io is only called once when the reqeust is complete, the 'size' argument is now redundant. Remove it. Now there is no need for bio_endio to subtract the size completed from bi_size. So don't do that either. While we are at it, change bi_end_io to return void. Signed-off-by: Neil Brown <neilb@suse.de> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-20fix some conversion overflowsNick Piggin1-1/+1
Fix page index to offset conversion overflows in buffer layer, ecryptfs, and ocfs2. It would be nice to convert the whole tree to page_offset, but for now just fix the bugs. Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19[FS] Implement block_page_mkwrite.David Chinner1-0/+47
Many filesystems need a ->page-mkwrite callout to correctly set up pages that have been written to by mmap. This is especially important when mmap is writing into holes as it allows filesystems to correctly account for and allocate space before the mmap write is allowed to proceed. Protection against truncate races is provided by locking the page and checking to see whether the page mapping is correct and whether it is beyond EOF so we don't end up allowing allocations beyond the current EOF or changing EOF as a result of a mmap write. SGI-PV: 940392 SGI-Modid: 2.6.x-xfs-melb:linux:29146a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-07-17fs: introduce some page/buffer invariantsNick Piggin1-17/+37
It is a bug to set a page dirty if it is not uptodate unless it has buffers. If the page has buffers, then the page may be dirty (some buffers dirty) but not uptodate (some buffers not uptodate). The exception to this rule is if the set_page_dirty caller is racing with truncate or invalidate. A buffer can not be set dirty if it is not uptodate. If either of these situations occurs, it indicates there could be some data loss problem. Some of these warnings could be a harmless one where the page or buffer is set uptodate immediately after it is dirtied, however we should fix those up, and enforce this ordering. Bring the order of operations for truncate into line with those of invalidate. This will prevent a page from being able to go !uptodate while we're holding the tree_lock, which is probably a good thing anyway. Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17Lumpy Reclaim V4Andy Whitcroft1-1/+1
When we are out of memory of a suitable size we enter reclaim. The current reclaim algorithm targets pages in LRU order, which is great for fairness at order-0 but highly unsuitable if you desire pages at higher orders. To get pages of higher order we must shoot down a very high proportion of memory; >95% in a lot of cases. This patch set adds a lumpy reclaim algorithm to the allocator. It targets groups of pages at the specified order anchored at the end of the active and inactive lists. This encourages groups of pages at the requested orders to move from active to inactive, and active to free lists. This behaviour is only triggered out of direct reclaim when higher order pages have been requested. This patch set is particularly effective when utilised with an anti-fragmentation scheme which groups pages of similar reclaimability together. This patch set is based on Peter Zijlstra's lumpy reclaim V2 patch which forms the foundation. Credit to Mel Gorman for sanitity checking. Mel said: The patches have an application with hugepage pool resizing. When lumpy-reclaim is used used with ZONE_MOVABLE, the hugepages pool can be resized with greater reliability. Testing on a desktop machine with 2GB of RAM showed that growing the hugepage pool with ZONE_MOVABLE on it's own was very slow as the success rate was quite low. Without lumpy-reclaim, each attempt to grow the pool by 100 pages would yield 1 or 2 hugepages. With lumpy-reclaim, getting 40 to 70 hugepages on each attempt was typical. [akpm@osdl.org: ia64 pfn_to_nid fixes and loop cleanup] [bunk@stusta.de: static declarations for internal functions] [a.p.zijlstra@chello.nl: initial lumpy V2 implementation] Signed-off-by: Andy Whitcroft <apw@shadowen.org> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Mel Gorman <mel@csn.ul.ie> Acked-by: Mel Gorman <mel@csn.ul.ie> Cc: Bob Picco <bob.picco@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17Add __GFP_MOVABLE for callers to flag allocations from high memory that may ↵Mel Gorman1-1/+1
be migrated It is often known at allocation time whether a page may be migrated or not. This patch adds a flag called __GFP_MOVABLE and a new mask called GFP_HIGH_MOVABLE. Allocations using the __GFP_MOVABLE can be either migrated using the page migration mechanism or reclaimed by syncing with backing storage and discarding. An API function very similar to alloc_zeroed_user_highpage() is added for __GFP_MOVABLE allocations called alloc_zeroed_user_highpage_movable(). The flags used by alloc_zeroed_user_highpage() are not changed because it would change the semantics of an existing API. After this patch is applied there are no in-kernel users of alloc_zeroed_user_highpage() so it probably should be marked deprecated if this patch is merged. Note that this patch includes a minor cleanup to the use of __GFP_ZERO in shmem.c to keep all flag modifications to inode->mapping in the shmem_dir_alloc() helper function. This clean-up suggestion is courtesy of Hugh Dickens. Additional credit goes to Christoph Lameter and Linus Torvalds for shaping the concept. Credit to Hugh Dickens for catching issues with shmem swap vector and ramfs allocations. [akpm@linux-foundation.org: build fix] [hugh@veritas.com: __GFP_ZERO cleanup] Signed-off-by: Mel Gorman <mel@csn.ul.ie> Cc: Andy Whitcroft <apw@shadowen.org> Cc: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16buffer: kill old incorrect commentEric W. Biederman1-5/+0
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-21Fix "fs: convert core functions to zero_user_page"OGAWA Hirofumi1-1/+1
The bug was introduced by 01f2705daf5a36208e69d7cf95db9c330f843af6. It misses to convert the first argument, it should be "new_page". This became a cause of fatfs corruption. Cc: Nate Diller <nate.diller@gmail.com> Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-17Fix page allocation flags in grow_dev_page()Christoph Lameter1-1/+2
grow_dev_page() simply passes GFP_NOFS to find_or_create_page. This means the allocation of radix tree nodes is done with GFP_NOFS and the allocation of a new page is done using GFP_NOFS. The mapping has a flags field that contains the necessary allocation flags for the page cache allocation. These need to be consulted in order to get DMA and HIGHMEM allocations etc right. And yes a blockdev could be allowing Highmem allocations if its a ramdisk. Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-17Remove SLAB_CTOR_CONSTRUCTORChristoph Lameter1-18/+4
SLAB_CTOR_CONSTRUCTOR is always specified. No point in checking it. Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: David Howells <dhowells@redhat.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Steven French <sfrench@us.ibm.com> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Anton Altaparmakov <aia21@cantab.net> Cc: Mark Fasheh <mark.fasheh@oracle.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Jan Kara <jack@ucw.cz> Cc: David Chinner <dgc@sgi.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09Add suspend-related notifications for CPU hotplugRafael J. Wysocki1-1/+1
Since nonboot CPUs are now disabled after tasks and devices have been frozen and the CPU hotplug infrastructure is used for this purpose, we need special CPU hotplug notifications that will help the CPU-hotplug-aware subsystems distinguish normal CPU hotplug events from CPU hotplug events related to a system-wide suspend or resume operation in progress. This patch introduces such notifications and causes them to be used during suspend and resume transitions. It also changes all of the CPU-hotplug-aware subsystems to take these notifications into consideration (for now they are handled in the same way as the corresponding "normal" ones). [oleg@tv-sign.ru: cleanups] Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Gautham R Shenoy <ego@in.ibm.com> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09fs: convert core functions to zero_user_pageNate Diller1-44/+12
It's very common for file systems to need to zero part or all of a page, the simplist way is just to use kmap_atomic() and memset(). There's actually a library function in include/linux/highmem.h that does exactly that, but it's confusingly named memclear_highpage_flush(), which is descriptive of *how* it does the work rather than what the *purpose* is. So this patchset renames the function to zero_user_page(), and calls it from the various places that currently open code it. This first patch introduces the new function call, and converts all the core kernel callsites, both the open-coded ones and the old memclear_highpage_flush() ones. Following this patch is a series of conversions for each file system individually, per AKPM, and finally a patch deprecating the old call. The diffstat below shows the entire patchset. [akpm@linux-foundation.org: fix a few things] Signed-off-by: Nate Diller <nate.diller@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08header cleaning: don't include smp_lock.h when not usedRandy Dunlap1-1/+0
Remove includes of <linux/smp_lock.h> where it is not used/needed. Suggested by Al Viro. Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc, sparc64, and arm (all 59 defconfigs). Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08block_write_full_page(): report ENOSPCAndrew Morton1-0/+1
block_write_full_page() forgot to propagate ENPSOC into the address_space. Cc: Guillaume Chazarain <guichaz@yahoo.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07slab allocators: Remove SLAB_DEBUG_INITIAL flagChristoph Lameter1-2/+1
I have never seen a use of SLAB_DEBUG_INITIAL. It is only supported by SLAB. I think its purpose was to have a callback after an object has been freed to verify that the state is the constructor state again? The callback is performed before each freeing of an object. I would think that it is much easier to check the object state manually before the free. That also places the check near the code object manipulation of the object. Also the SLAB_DEBUG_INITIAL callback is only performed if the kernel was compiled with SLAB debugging on. If there would be code in a constructor handling SLAB_DEBUG_INITIAL then it would have to be conditional on SLAB_DEBUG otherwise it would just be dead code. But there is no such code in the kernel. I think SLUB_DEBUG_INITIAL is too problematic to make real use of, difficult to understand and there are easier ways to accomplish the same effect (i.e. add debug code before kfree). There is a related flag SLAB_CTOR_VERIFY that is frequently checked to be clear in fs inode caches. Remove the pointless checks (they would even be pointless without removeal of SLAB_DEBUG_INITIAL) from the fs constructors. This is the last slab flag that SLUB did not support. Remove the check for unimplemented flags from SLUB. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07mm: optimize kill_bdev()Peter Zijlstra1-2/+1
Remove duplicate work in kill_bdev(). It currently invalidates and then truncates the bdev's mapping. invalidate_mapping_pages() will opportunistically remove pages from the mapping. And truncate_inode_pages() will forcefully remove all pages. The only thing truncate doesn't do is flush the bh lrus. So do that explicitly. This avoids (very unlikely) but possible invalid lookup results if the same bdev is quickly re-issued. It also will prevent extreme kernel latencies which are observed when blockdevs which have a large amount of pagecache are unmounted, by avoiding invalidate_mapping_pages() on that path. invalidate_mapping_pages() has no cond_resched (it can be called under spinlock), whereas truncate_inode_pages() has one. [akpm@linux-foundation.org: restore nrpages==0 optimisation] Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07mm: remove destroy_dirty_buffers from invalidate_bdev()Peter Zijlstra1-6/+1
Remove the destroy_dirty_buffers argument from invalidate_bdev(), it hasn't been used in 6 years (so akpm says). find * -name \*.[ch] | xargs grep -l invalidate_bdev | while read file; do quilt add $file; sed -ie 's/invalidate_bdev(\([^,]*\),[^)]*)/invalidate_bdev(\1)/g' $file; done Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07fs: buffer don't PageUptodate without page lockedNick Piggin1-10/+1
__block_write_full_page is calling SetPageUptodate without the page locked. This is unusual, but not incorrect, as PG_writeback is still set. However the next patch will require that SetPageUptodate always be called with the page locked. Simply don't bother setting the page uptodate in this case (it is unusual that the write path does such a thing anyway). Instead just leave it to the read side to bring the page uptodate when it notices that all buffers are uptodate. Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-06[PATCH] fs: nobh_truncate_page() fixDave Kleikamp1-0/+9
This fixes a regression caused by 22c8ca78f20724676b6006232bf06cc3e9299539. nobh_prepare_write() no longer marks the page uptodate, so nobh_truncate_page() needs to do it. Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20[PATCH] fs: fix nobh data leakNick Piggin1-18/+3
nobh_prepare_write leaks data similarly to how simple_prepare_write did. Fix by not marking the page uptodate until nobh_commit_write time. Again, this could break weird use-cases, but none appear to exist in the tree. We can safely remove the set_page_dirty, because as the comment says, nobh_commit_write does set_page_dirty. If a filesystem wants to allocate backing store for a page dirtied via mmap, page_mkwrite is the suggested approach. Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-20[PATCH] fs: fix __block_write_full_page error case buffer submissionNick Piggin1-1/+1
Andrew noticed that unlocking the page before submitting all buffers for writeout could cause problems if the IO completes before we've finished messing around with the page buffers, and they subsequently get freed. Even if there were no bug, it is a good idea to bring the error case into line with the common case here. Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] warning fix: unsigned->signedTomasz Kvarsin1-6/+6
While compiling my code with -Wconversion using gcc-trunk, I always get a bunch of warrning from headers, here is fix for them: __getblk is alawys called with unsigned argument, but it takes signed, the same story with __bread,__breadahead and so on. Signed-off-by: Tomasz Kvarsin Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12[PATCH] Make BH_Unwritten a first class bufferhead flag V2David Chinner1-1/+3
Currently, XFS uses BH_PrivateStart for flagging unwritten extent state in a bufferhead. Recently, I found the long standing mmap/unwritten extent conversion bug, and it was to do with partial page invalidation not clearing the unwritten flag from bufferheads attached to the page but beyond EOF. See here for a full explaination: http://oss.sgi.com/archives/xfs/2006-12/msg00196.html The solution I have checked into the XFS dev tree involves duplicating code from block_invalidatepage to clear the unwritten flag from the bufferhead(s), and then calling block_invalidatepage() to do the rest. Christoph suggested that this would be better solved by pushing the unwritten flag into the common buffer head flags and just adding the call to discard_buffer(): http://oss.sgi.com/archives/xfs/2006-12/msg00239.html The following patch makes BH_Unwritten a first class citizen. Signed-off-by: Dave Chinner <dgc@sgi.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11[PATCH] buffer: memorder fixNick Piggin1-0/+1
unlock_buffer(), like unlock_page(), must not clear the lock without ensuring that the critical section is closed. Mingming later sent the same patch, saying: We are running SDET benchmark and saw double free issue for ext3 extended attributes block, which complains the same xattr block already being freed (in ext3_xattr_release_block()). The problem could also been triggered by multiple threads loop untar/rm a kernel tree. The race is caused by missing a memory barrier at unlock_buffer() before the lock bit being cleared, resulting in possible concurrent h_refcounter update. That causes a reference counter leak, then later leads to the double free that we have seen. Inside unlock_buffer(), there is a memory barrier is placed *after* the lock bit is being cleared, however, there is no memory barrier *before* the bit is cleared. On some arch the h_refcount update instruction and the clear bit instruction could be reordered, thus leave the critical section re-entered. The race is like this: For example, if the h_refcount is initialized as 1, cpu 0: cpu1 -------------------------------------- ----------------------------------- lock_buffer() /* test_and_set_bit */ clear_buffer_locked(bh); lock_buffer() /* test_and_set_bit */ h_refcount = h_refcount+1; /* = 2*/ h_refcount = h_refcount + 1; /*= 2 */ clear_buffer_locked(bh); .... ...... We lost a h_refcount here. We need a memory barrier before the buffer head lock bit being cleared to force the order of the two writes. Please apply. Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11[PATCH] remove invalidate_inode_pages()Andrew Morton1-1/+1
Convert all calls to invalidate_inode_pages() into open-coded calls to invalidate_mapping_pages(). Leave the invalidate_inode_pages() wrapper in place for now, marked as deprecated. Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-01-29[PATCH] Fix try_to_free_buffer() lockingNick Piggin1-1/+5
Fix commit ecdfc9787fe527491baefc22dce8b2dbd5b2908d Not to put too fine a point on it, but in a nutshell... __set_page_dirty_buffers() | try_to_free_buffers() ---------------------------+--------------------------- | spin_lock(private_lock); | drop_bufers() | spin_unlock(private_lock); spin_lock(private_lock) | !page_has_buffers() | spin_unlock(private_lock) | SetPageDirty() | | cancel_dirty_page() oops! Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-01-26Resurrect 'try_to_free_buffers()' VM hackeryLinus Torvalds1-1/+14
It's not pretty, but it appears that ext3 with data=journal will clean pages without ever actually telling the VM that they are clean. This, in turn, will result in the VM (and balance_dirty_pages() in particular) to never realize that the pages got cleaned, and wait forever for an event that already happened. Technically, this seems to be a problem with ext3 itself, but it used to be hidden by 'try_to_free_buffers()' noticing this situation on its own, and just working around the filesystem problem. This commit re-instates that hack, in order to avoid a regression for the 2.6.20 release. This fixes bugzilla 7844: http://bugzilla.kernel.org/show_bug.cgi?id=7844 Peter Zijlstra points out that we should probably retain the debugging code that this removes from cancel_dirty_page(), and I agree, but for the imminent release we might as well just silence the warning too (since it's not a new bug: anything that triggers that warning has been around forever). Acked-by: Randy Dunlap <rdunlap@xenotime.net> Acked-by: Jens Axboe <jens.axboe@oracle.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-01-11[PATCH] Revert bd_mount_mutex back to a semaphoreDavid Chinner1-3/+3
Revert bd_mount_mutex back to a semaphore so that xfs_freeze -f /mnt/newtest; xfs_freeze -u /mnt/newtest works safely and doesn't produce lockdep warnings. (XFS unlocks the semaphore from a different task, by design. The mutex code warns about this) Signed-off-by: Dave Chinner <dgc@sgi.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-21Clean up and make try_to_free_buffers() not race with dirty pagesLinus Torvalds1-17/+1
This is preparatory work in our continuing saga on some hard-to-trigger file corruption with shared writable mmap() after the dirty page tracking changes (commit d08b3851da41d0ee60851f2c75b118e1f7a5fc89 etc) were merged. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10[PATCH] io-accounting: write-cancel accountingAndrew Morton1-1/+6
Account for the number of byte writes which this process caused to not happen after all. Cc: Jay Lan <jlan@sgi.com> Cc: Shailabh Nagar <nagar@watson.ibm.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Chris Sturtivant <csturtiv@sgi.com> Cc: Tony Ernst <tee@sgi.com> Cc: Guillaume Thouvenin <guillaume.thouvenin@bull.net> Cc: David Wright <daw@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10[PATCH] io-accounting: write accountingAndrew Morton1-1/+4
Accounting writes is fairly simple: whenever a process flips a page from clean to dirty, we accuse it of having caused a write to underlying storage of PAGE_CACHE_SIZE bytes. This may overestimate the amount of writing: the page-dirtying may cause only one buffer_head's worth of writeout. Fixing that is possible, but probably a bit messy and isn't obviously important. Cc: Jay Lan <jlan@sgi.com> Cc: Shailabh Nagar <nagar@watson.ibm.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Chris Sturtivant <csturtiv@sgi.com> Cc: Tony Ernst <tee@sgi.com> Cc: Guillaume Thouvenin <guillaume.thouvenin@bull.net> Cc: David Wright <daw@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10[PATCH] clean up __set_page_dirty_nobuffers()Andrew Morton1-13/+12
Save a tabstop in __set_page_dirty_nobuffers() and __set_page_dirty_buffers() and a few other places. No functional changes. Cc: Jay Lan <jlan@sgi.com> Cc: Shailabh Nagar <nagar@watson.ibm.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Chris Sturtivant <csturtiv@sgi.com> Cc: Tony Ernst <tee@sgi.com> Cc: Guillaume Thouvenin <guillaume.thouvenin@bull.net> Cc: David Wright <daw@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] hotplug CPU: clean up hotcpu_notifier() useIngo Molnar1-2/+0
There was lots of #ifdef noise in the kernel due to hotcpu_notifier(fn, prio) not correctly marking 'fn' as used in the !HOTPLUG_CPU case, and thus generating compiler warnings of unused symbols, hence forcing people to add #ifdefs. the compiler can skip truly unused functions just fine: text data bss dec hex filename 1624412 728710 3674856 6027978 5bfaca vmlinux.before 1624412 728710 3674856 6027978 5bfaca vmlinux.after [akpm@osdl.org: topology.c fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07[PATCH] slab: remove kmem_cache_tChristoph Lameter1-2/+2
Replace all uses of kmem_cache_t with struct kmem_cache. The patch was generated using the following script: #!/bin/sh # # Replace one string by another in all the kernel sources. # set -e for file in `find * -name "*.c" -o -name "*.h"|xargs grep -l $1`; do quilt add $file sed -e "1,\$s/$1/$2/g" $file >/tmp/$$ mv /tmp/$$ $file quilt refresh done The script was run like this sh replace kmem_cache_t "struct kmem_cache" Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-17[PATCH] Fix IO error reporting on fsync()Jan Kara1-2/+9
When IO error happens on metadata buffer, buffer is freed from memory and later fsync() is called, filesystems like ext2 fail to report EIO. We solve the problem by introducing a pointer to associated address space into the buffer_head. When a buffer is removed from a list of metadata buffers associated with an address space, IO error is transferred from the buffer to the address space, so that fsync can later report it. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11[PATCH] D-cache aliasing issue in __block_prepare_writeMonakhov Dmitriy1-0/+2
A couple of flush_dcache_page()s are missing on the I/O-error paths. Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11[PATCH] grow_buffers() infinite loop fixAndrew Morton1-2/+19
If grow_buffers() is for some reason passed a block number which wants to lie outside the maximum-addressable pagecache range (PAGE_SIZE * 4G bytes) then it will accidentally truncate `index' and will then instnatiate a page at the wrong pagecache offset. This causes __getblk_slow() to go into an infinite loop. This can happen with corrupted disks, or with software errors elsewhere. Detect that, and handle it. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-09[PATCH] mm: bug in set_page_dirty_buffersNick Piggin1-1/+4
This was triggered, but not the fault of, the dirty page accounting patches. Suitable for -stable as well, after it goes upstream. Unable to handle kernel NULL pointer dereference at virtual address 0000004c EIP is at _spin_lock+0x12/0x66 Call Trace: [<401766e7>] __set_page_dirty_buffers+0x15/0xc0 [<401401e7>] set_page_dirty+0x2c/0x51 [<40140db2>] set_page_dirty_balance+0xb/0x3b [<40145d29>] __do_fault+0x1d8/0x279 [<40147059>] __handle_mm_fault+0x125/0x951 [<401133f1>] do_page_fault+0x440/0x59f [<4034d0c1>] error_code+0x39/0x40 [<08048a33>] 0x8048a33 Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-16 09:02:24 +0000