summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2014-06-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds6-40/+50
Pull SCSI target fixes from Nicholas Bellinger: "Here are the remaining fixes for v3.15. This series includes: - iser-target fix for ImmediateData exception reference count bug (Sagi + nab) - iscsi-target fix for MC/S login + potential iser-target MRDSL buffer overrun (Santosh + Roland) - iser-target fix for v3.15-rc multi network portal shutdown regression (nab) - target fix for allowing READ_CAPCITY during ALUA Standby access state (Chris + nab) - target fix for NULL pointer dereference of alua_access_state for un-configured devices (Chris + nab)" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target: Fix alua_access_state attribute OOPs for un-configured devices target: Allow READ_CAPACITY opcode in ALUA Standby access state iser-target: Fix multi network portal shutdown regression iscsi-target: Fix wrong buffer / buffer overrun in iscsi_change_param_value() iser-target: Add missing target_put_sess_cmd for ImmedateData failure
2014-06-06target: Fix alua_access_state attribute OOPs for un-configured devicesNicholas Bellinger1-0/+5
This patch fixes a OOPs where an attempt to write to the per-device alua_access_state configfs attribute at: /sys/kernel/config/target/core/$HBA/$DEV/alua/$TG_PT_GP/alua_access_state results in an NULL pointer dereference when the backend device has not yet been configured. This patch adds an explicit check for DF_CONFIGURED, and fails with -ENODEV to avoid this case. Reported-by: Chris Boot <crb@tiger-computing.co.uk> Reported-by: Philip Gaw <pgaw@darktech.org.uk> Cc: Chris Boot <crb@tiger-computing.co.uk> Cc: Philip Gaw <pgaw@darktech.org.uk> Cc: stable@vger.kernel.org # 3.8+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-06-06target: Allow READ_CAPACITY opcode in ALUA Standby access stateNicholas Bellinger1-0/+9
This patch allows READ_CAPACITY + SAI_READ_CAPACITY_16 opcode processing to occur while the associated ALUA group is in Standby access state. This is required to avoid host side LUN probe failures during the initial scan if an ALUA group has already implicitly changed into Standby access state. This addresses a bug reported by Chris + Philip using dm-multipath + ESX hosts configured with ALUA multipath. Reported-by: Chris Boot <crb@tiger-computing.co.uk> Reported-by: Philip Gaw <pgaw@darktech.org.uk> Cc: Chris Boot <crb@tiger-computing.co.uk> Cc: Philip Gaw <pgaw@darktech.org.uk> Cc: Hannes Reinecke <hare@suse.de> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-06-04Merge tag 'pm-3.15-final' of ↵Linus Torvalds1-21/+31
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull intel pstate fixes from Rafael Wysocki: "Final power management fixes for 3.15 - Taking non-idle time into account when calculating core busy time was a mistake and led to a performance regression. Since the problem it was supposed to address is now taken care of in a different way, we don't need to do it any more, so drop the non-idle time tracking from intel_pstate. Dirk Brandewie. - Changing to fixed point math throughout the busy calculation introduced rounding errors that adversely affect the accuracy of intel_pstate's computations. Fix from Dirk Brandewie. - The PID controller algorithm used by intel_pstate assumes that the time interval between two adjacent samples will always be the same which is not the case for deferable timers (used by intel_pstate) when the system is idle. This leads to inaccurate predictions and artificially increases convergence times for the minimum P-state. Fix from Dirk Brandewie. - intel_pstate carries out computations using 32-bit variables that may overflow for large enough values of APERF/MPERF. Switch to using 64-bit variables for computations, from Doug Smythies" * tag 'pm-3.15-final' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: intel_pstate: Improve initial busy calculation intel_pstate: add sample time scaling intel_pstate: Correct rounding in busy calculation intel_pstate: Remove C0 tracking
2014-06-04Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds6-12/+31
Pull drm fixes from Dave Airlie: "All fairly small: radeon stability and a panic path fix. Mostly radeon fixes, suspend/resume fix, stability on the CIK chipsets, along with a locking check avoidance patch for panic times regression" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon: use the CP DMA on CIK drm/radeon: sync page table updates drm/radeon: fix vm buffer size estimation drm/crtc-helper: skip locking checks in panicking path drm/radeon/dpm: resume fixes for some systems
2014-06-03iser-target: Fix multi network portal shutdown regressionNicholas Bellinger2-1/+3
This patch fixes a iser-target specific regression introduced in v3.15-rc6 with: commit 14f4b54fe38f3a8f8392a50b951c8aa43b63687a Author: Sagi Grimberg <sagig@mellanox.com> Date: Tue Apr 29 13:13:47 2014 +0300 Target/iscsi,iser: Avoid accepting transport connections during stop stage where the change to set iscsi_np->enabled = false within iscsit_clear_tpg_np_login_thread() meant that a iscsi_np with two iscsi_tpg_np exports would have it's parent iscsi_np set to a disabled state, even if other iscsi_tpg_np exports still existed. This patch changes iscsit_clear_tpg_np_login_thread() to only set iscsi_np->enabled = false when shutdown = true, and also changes iscsit_del_np() to set iscsi_np->enabled = true when iscsi_np->np_exports is non zero. Cc: Sagi Grimberg <sagig@dev.mellanox.co.il> Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-06-03iscsi-target: Fix wrong buffer / buffer overrun in iscsi_change_param_value()Roland Dreier1-39/+31
In non-leading connection login, iscsi_login_non_zero_tsih_s1() calls iscsi_change_param_value() with the buffer it uses to hold the login PDU, not a temporary buffer. This leads to the login header getting corrupted and login failing for non-leading connections in MC/S. Fix this by adding a wrapper iscsi_change_param_sprintf() that handles the temporary buffer itself to avoid confusion. Also handle sending a reject in case of failure in the wrapper, which lets the calling code get quite a bit smaller and easier to read. Finally, bump the size of the temporary buffer from 32 to 64 bytes to be safe, since "MaxRecvDataSegmentLength=" by itself is 25 bytes; with a trailing NUL, a value >= 1M will lead to a buffer overrun. (This isn't the default but we don't need to run right at the ragged edge here) Reported-by: Santosh Kulkarni <santosh.kulkarni@calsoftinc.com> Signed-off-by: Roland Dreier <roland@purestorage.com> Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-06-03iser-target: Add missing target_put_sess_cmd for ImmedateData failureNicholas Bellinger1-0/+2
This patch addresses a bug where an early exception for SCSI WRITE with ImmediateData=Yes was missing the target_put_sess_cmd() call to drop the extra se_cmd->cmd_kref reference obtained during the normal iscsit_setup_scsi_cmd() codepath execution. This bug was manifesting itself during session shutdown within isert_cq_rx_comp_err() where target_wait_for_sess_cmds() would end up waiting indefinately for the last se_cmd->cmd_kref put to occur for the failed SCSI WRITE + ImmediateData descriptors. This fix follows what traditional iscsi-target code already does for the same failure case within iscsit_get_immediate_data(). Reported-by: Sagi Grimberg <sagig@dev.mellanox.co.il> Cc: Sagi Grimberg <sagig@dev.mellanox.co.il> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-06-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds14-33/+166
Pull networking fixes from David Miller: 1) Unbreak zebra and other netlink apps, from Eric W Biederman. 2) Some new qmi_wwan device IDs, from Aleksander Morgado. 3) Fix info leak in DCB netlink handler of qlcnic driver, from Dan Carpenter. 4) inet_getid() and ipv6_select_ident() do not generate monotonically increasing ID numbers, fix from Eric Dumazet. 5) Fix memory leak in __sk_prepare_filter(), from Leon Yu. 6) Netlink leftover bytes warning message is user triggerable, rate limit it. From Michal Schmidt. 7) Fix non-linear SKB panic in ipvs, from Peter Christensen. 8) Congestion window undo needs to be performed even if only never retransmitted data is SACK'd, fix from Yuching Cheng. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (24 commits) net: filter: fix possible memory leak in __sk_prepare_filter() net: ec_bhf: Add runtime dependencies tcp: fix cwnd undo on DSACK in F-RTO netlink: Only check file credentials for implicit destinations ipheth: Add support for iPad 2 and iPad 3 team: fix mtu setting net: fix inet_getid() and ipv6_select_ident() bugs net: qmi_wwan: interface #11 in Sierra Wireless MC73xx is not QMI net: qmi_wwan: add additional Sierra Wireless QMI devices bridge: Prevent insertion of FDB entry with disallowed vlan netlink: rate-limit leftover bytes warning and print process name bridge: notify user space after fdb update net: qmi_wwan: add Netgear AirCard 341U net: fix wrong mac_len calculation for vlans batman-adv: fix NULL pointer dereferences net/mlx4_core: Reset RoCE VF gids when guest driver goes down emac: aggregation of v1-2 PLB errors for IER register emac: add missing support of 10mbit in emac/rgmii can: only rename enabled led triggers when changing the netdev name ipvs: Fix panic due to non-linear skb ...
2014-06-02Merge tag 'md/3.15-fixes' of git://neil.brown.name/mdLinus Torvalds1-1/+4
Pull two md bugfixes from Neil Brown: "Two md bugfixes for possible corruption when restarting reshape If a raid5/6 reshape is restarted (After stopping and re-assembling the array) and the array is marked read-only (or read-auto), then the reshape will appear to complete immediately, without actually moving anything around. This can result in corruption. There are two patches which do much the same thing in different places. They are separate because one is an older bug and so can be applied to more -stable kernels" * tag 'md/3.15-fixes' of git://neil.brown.name/md: md: always set MD_RECOVERY_INTR when interrupting a reshape thread. md: always set MD_RECOVERY_INTR when aborting a reshape or other "resync".
2014-06-02net: ec_bhf: Add runtime dependenciesJean Delvare1-0/+1
The ec_bhf driver is specific to the Beckhoff CX embedded PC series. These are based on Intel x86 CPU. So we can add a dependency on X86, with COMPILE_TEST as an alternative to still allow for broader build-testing. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Darek Marcinkiewicz <reksio@newterm.pl> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-02libata: Blacklist queued trim for Crucial M500Martin K. Petersen1-4/+4
Queued trim only works for some users with MU05 firmware. Revert to blacklisting all firmware versions. Introduced by commit d121f7d0cbb8 ("libata: Update queued trim blacklist for M5x0 drives") which this effectively reverts, while retaining the blacklisting of M550. See https://bugzilla.kernel.org/show_bug.cgi?id=71371 for reports of trouble with MU05 firmware. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-02Merge tag 'usb-3.15-rc8' of ↵Linus Torvalds9-17/+47
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some fixes for 3.15-rc8 that resolve a number of tiny USB issues that have been reported, and there are some new device ids as well. All have been tested in linux-next" * tag 'usb-3.15-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: xhci: delete endpoints from bandwidth list before freeing whole device usb: pci-quirks: Prevent Sony VAIO t-series from switching usb ports USB: cdc-wdm: properly include types.h usb: cdc-wdm: export cdc-wdm uapi header USB: serial: option: add support for Novatel E371 PCIe card USB: ftdi_sio: add NovaTech OrionLXm product ID USB: io_ti: fix firmware download on big-endian machines (part 2) USB: Avoid runtime suspend loops for HCDs that can't handle suspend/resume
2014-06-02Merge tag 'staging-3.15-rc8' of ↵Linus Torvalds7-14/+54
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver fixes from Greg KH: "Here are some staging driver fixes for 3.15. Three are for the speakup drivers (one fixes a regression caused in 3.15-rc, and the other two resolve a tty issue found by Ben Hutchings) The comedi and r8192e_pci driver fixes also resolve reported issues" * tag 'staging-3.15-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: r8192e_pci: fix htons error Staging: speakup: Update __speakup_paste_selection() tty (ab)usage to match vt Staging: speakup: Move pasting into a work item staging: comedi: ni_daq_700: add mux settling delay speakup: fix incorrect perms on speakup_acntsa.c
2014-06-02ipheth: Add support for iPad 2 and iPad 3Kristian Evensen1-0/+10
Each iPad model has a different product id, this patch adds support for iPad 2 (pid 0x12a2) and iPad 3 (pid 0x12a6). Note that iPad 2 must be jailbroken and a third-party app must be used for tethering to work. On iPad 3, tethering works out of the box (assuming your ISP is nice). Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-02team: fix mtu settingJiri Pirko1-1/+6
Now it is not possible to set mtu to team device which has a port enslaved to it. The reason is that when team_change_mtu() calls dev_set_mtu() for port device, notificator for NETDEV_PRECHANGEMTU event is called and team_device_event() returns NOTIFY_BAD forbidding the change. So fix this by returning NOTIFY_DONE here in case team is changing mtu in team_change_mtu(). Introduced-by: 3d249d4c "net: introduce ethernet teaming device" Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-02net: qmi_wwan: interface #11 in Sierra Wireless MC73xx is not QMIAleksander Morgado1-1/+0
This interface is unusable, as the cdc-wdm character device doesn't reply to any QMI command. Also, the out-of-tree Sierra Wireless GobiNet driver fully skips it. Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-02net: qmi_wwan: add additional Sierra Wireless QMI devicesAleksander Morgado1-0/+4
A set of new VID/PIDs retrieved from the out-of-tree GobiNet/GobiSerial Sierra Wireless drivers. Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-02intel_pstate: Improve initial busy calculationDoug Smythies1-5/+8
This change makes the busy calculation using 64 bit math which prevents overflow for large values of aperf/mperf. Cc: 3.14+ <stable@vger.kernel.org> # 3.14+ Signed-off-by: Doug Smythies <dsmythies@telus.net> Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-06-02intel_pstate: add sample time scalingDirk Brandewie1-1/+17
The PID assumes that samples are of equal time, which for a deferable timers this is not true when the system goes idle. This causes the PID to take a long time to converge to the min P state and depending on the pattern of the idle load can make the P state appear stuck. The hold-off value of three sample times before using the scaling is to give a grace period for applications that have high performance requirements and spend a lot of time idle, The poster child for this behavior is the ffmpeg benchmark in the Phoronix test suite. Cc: 3.14+ <stable@vger.kernel.org> # 3.14+ Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-06-02intel_pstate: Correct rounding in busy calculationDirk Brandewie1-5/+7
Changing to fixed point math throughout the busy calculation in commit e66c1768 (Change busy calculation to use fixed point math.) Introduced some inaccuracies by rounding the busy value at two points in the calculation. This change removes roundings and moves the rounding to the output of the PID where the calculations are complete and the value returned as an integer. Fixes: e66c17683746 (intel_pstate: Change busy calculation to use fixed point math.) Reported-by: Doug Smythies <dsmythies@telus.net> Cc: 3.14+ <stable@vger.kernel.org> # 3.14+ Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-06-02intel_pstate: Remove C0 trackingDirk Brandewie1-12/+1
Commit fcb6a15c (intel_pstate: Take core C0 time into account for core busy calculation) introduced a regression referenced below. The issue with "lockup" after suspend that this commit was addressing is now dealt with in the suspend path. Fixes: fcb6a15c2e7e (intel_pstate: Take core C0 time into account for core busy calculation) Link: https://bugzilla.kernel.org/show_bug.cgi?id=66581 Link: https://bugzilla.kernel.org/show_bug.cgi?id=75121 Reported-by: Doug Smythies <dsmythies@telus.net> Cc: 3.14+ <stable@vger.kernel.org> # 3.14+ Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-06-02drm/radeon: use the CP DMA on CIKChristian König1-2/+2
The SDMA sometimes doesn't seem to work reliable. Signed-off-by: Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org
2014-06-02drm/radeon: sync page table updatesChristian König1-2/+7
Only necessary if we don't use the same engine for buffer moves and table updates. Signed-off-by: Christian König <christian.koenig@amd.com>
2014-06-02drm/radeon: fix vm buffer size estimationChristian König1-1/+1
Only relevant if we got VM_BLOCK_SIZE>9, but better save than sorry. Signed-off-by: Christian König <christian.koenig@amd.com>
2014-06-02drm/crtc-helper: skip locking checks in panicking pathSergei Antonov1-2/+15
Skip locking checks in drm_helper_*_in_use() if they are called in panicking path. See similar code in drm_warn_on_modeset_not_all_locked(). After panic information has been output, these WARN_ONs go off outputing a lot of lines and scrolling the panic information out of the screen. Here is a partial call trace showing how execution reaches them: ? drm_helper_crtc_in_use() ? __drm_helper_disable_unused_functions() ? several *_set_config functions ? drm_fb_helper_restore_fbdev_mode() Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Sergei Antonov <saproj@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-02drm/radeon/dpm: resume fixes for some systemsAlex Deucher3-5/+6
Setting the power state prior to restoring the display hardware leads to blank screens on some systems. Drop the power state set from dpm resume. The power state will get set as part of the mode set sequence. Also add an explicit power state set after mode set resume to cover PX and headless systems. bug: https://bugzilla.kernel.org/show_bug.cgi?id=76761 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-06-01net: qmi_wwan: add Netgear AirCard 341UAleksander Morgado1-0/+1
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-31Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds12-304/+298
Pull drm fixes from Dave Airlie: "Mostly quiet now: i915: fixing userspace visiblie issues, all stable marked radeon: one more pll fix, two crashers, one suspend/resume regression" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/radeon: Resume fbcon last drm/radeon: only allocate necessary size for vm bo list drm/radeon: don't allow RADEON_GEM_DOMAIN_CPU for command submission drm/radeon: avoid crash if VM command submission isn't available drm/radeon: lower the ref * post PLL maximum once more drm/i915: Prevent negative relocation deltas from wrapping drm/i915: Only copy back the modified fields to userspace from execbuffer drm/i915: Fix dynamic allocation of physical handles
2014-05-30Merge tag 'linux-can-fixes-for-3.15-20140528' of ↵David S. Miller1-0/+3
git://gitorious.org/linux-can/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2014-05-28 here's a pull request for v3.15, hope it's not too late. Oliver Hartkopp fixed a bug in the CAN led trigger device renaming code. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-30net/mlx4_core: Reset RoCE VF gids when guest driver goes downJack Morgenstein4-14/+127
Reset the GIDs assigned to a VF in the port RoCE GID table when that guest goes down (either crashes or goes down cleanly). As part of this fix, we refactor the RoCE gid table driver copy, moving it to the mlx4_port_info structure (together with the MAC and VLAN tables). As with the MAC and VLAN tables, we now use a mutex per port for the GID table so that modifying the driver copy and modifying the firmware copy of a port GID table becomes an atomic operation (thus avoiding driver-copy/FW-copy mismatches). Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-30emac: aggregation of v1-2 PLB errors for IER registerIvan Mikhaylov2-16/+9
Aggreagation of version 1-2 because of version 1 can hit PLB errors too. If it's not set so we missing events for PLB bits and driver can't process those interrupts. Signed-off-by: Ivan Mikhaylov <ivan@ru.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-30emac: add missing support of 10mbit in emac/rgmiiIvan Mikhaylov1-0/+3
In chips of emac/rgmii b'000' for 0/1 channel isn't suitable which resulted in non working network interface in this mode. Signed-off-by: Ivan Mikhaylov <ivan@ru.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-31drm/radeon: Resume fbcon lastDaniel Vetter1-5/+6
So a few people complained that commit 177cf92de4aa97ec1435987e91696ed8b5023130 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Apr 1 22:14:59 2014 +0200 drm/crtc-helpers: fix dpms on logic which was merged into 3.15-rc1, broke resume on radeons. Strangely git bisect lead everyone to commit 25f397a429dfa43f22c278d0119a60a343aa568f Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Fri Jul 19 18:57:11 2013 +0200 drm/crtc-helper: explicit DPMS on after modeset which was merged long ago and actually part of 3.14. Digging deeper I've noticed (again) that the call to drm_helper_resume_force_mode in the radeon resume handlers was a no-op previously because everything gets shut down on suspend. radeon does this with explicit calls to drm_helper_connector_dpms with DPMS_OFF. But with 177c we now force the dpms state to ON, so suddenly resume_force_mode actually forced the crtcs back on. This is the intention of the change after all, the problem is that radeon resumes the fbdev console layer _before_ restoring the display, through calling fb_set_suspend. And fbcon does an immediate ->set_par, which in turn causes the same forced mode restore to happen. Two concurrent modeset operations didn't lead to happiness. Fix this by delaying the fbcon resume until the end of the readeon resum functions. v2: Fix up a bit of the spelling fail. References: https://lkml.org/lkml/2014/5/29/1043 References: https://lkml.org/lkml/2014/5/2/388 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=74751 Tested-by: Ken Moffat <zarniwhoop@ntlworld.com> Cc: Alex Deucher <alexdeucher@gmail.com> Cc: Ken Moffat <zarniwhoop@ntlworld.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@gmail.com>
2014-05-30Merge branch 'for-linus' of ↵Linus Torvalds6-121/+61
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input subsystem fixes from Dmitry Torokhov: "A couple of driver/build fixups and also redone quirk for Synaptics touchpads on Lenovo boxes (now using PNP IDs instead of DMI data to limit number of quirks)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: synaptics - change min/max quirk table to pnp-id matching Input: synaptics - add a matches_pnp_id helper function Input: synaptics - T540p - unify with other LEN0034 models Input: synaptics - add min/max quirk for the ThinkPad W540 Input: ambakmi - request a shared interrupt for AMBA KMI devices Input: pxa27x-keypad - fix generating scancode Input: atmel-wm97xx - only build for AVR32 Input: fix ps2/serio module dependency
2014-05-30Merge tag 'firewire-fixes' of ↵Linus Torvalds2-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 Pull firewire fix from Stefan Richter: "A regression fix for the IEEE 1394 subsystem: re-enable IRQ-based asynchronous request reception at addresses below 128 TB" * tag 'firewire-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: revert to 4 GB RDMA, fix protocols using Memory Space
2014-05-30Merge tag 'dm-3.15-fixes-3' of ↵Linus Torvalds3-9/+19
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device-mapper fixes from Mike Snitzer: "A dm-cache stable fix to split discards on cache block boundaries because dm-cache cannot yet handle discards that span cache blocks. Really fix a dm-mpath LOCKDEP warning that was introduced in -rc1. Add a 'no_space_timeout' control to dm-thinp to restore the ability to queue IO indefinitely when no data space is available. This fixes a change in behavior that was introduced in -rc6 where the timeout couldn't be disabled" * tag 'dm-3.15-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm mpath: really fix lockdep warning dm cache: always split discards on cache block boundaries dm thin: add 'no_space_timeout' dm-thin-pool module param
2014-05-30drm/radeon: only allocate necessary size for vm bo listChristian König1-3/+3
No need to always allocate the theoretical maximum here. Signed-off-by: Christian König <christian.koenig@amd.com>
2014-05-30drm/radeon: don't allow RADEON_GEM_DOMAIN_CPU for command submissionMarek Olšák1-0/+6
It hangs the hardware. Signed-off-by: Marek Olšák <marek.olsak@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org
2014-05-30drm/radeon: avoid crash if VM command submission isn't availableChristian König1-4/+11
Signed-off-by: Christian König <christian.koenig@amd.com> CC: stable@vger.kernel.org
2014-05-30drm/radeon: lower the ref * post PLL maximum once moreChristian König1-1/+1
Let's be conservative and use 100 here until we find something better. Bugs: https://bugzilla.kernel.org/show_bug.cgi?id=75241 Signed-off-by: Christian König <christian.koenig@amd.com>
2014-05-29Merge tag 'pm+acpi-3.15-rc8' of ↵Linus Torvalds3-6/+18
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management fixes from Rafael Wysocki: "These are three stable-candidate fixes, one for the ACPI thermal driver and two for cpufreq drivers. Specifics: - A workqueue is destroyed too early during the ACPI thermal driver module unload which leads to a NULL pointer dereference in the driver's remove callback. Fix from Aaron Lu. - A wrong argument is passed to devm_regulator_get_optional() in the probe routine of the cpu0 cpufreq driver which leads to resource leaks if the driver is unbound from the cpufreq platform device. Fix from Lucas Stach. - A lock is missing in cpufreq_governor_dbs() which leads to memory corruption and NULL pointer dereferences during system suspend/resume, for example. Fix from Bibek Basu" * tag 'pm+acpi-3.15-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / thermal: fix workqueue destroy order cpufreq: cpu0: drop wrong devm usage cpufreq: remove race while accessing cur_policy
2014-05-29Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds3-23/+47
git://git.linaro.org/people/mike.turquette/linux Pull clock fixes from Mike Turquette: "Small number of user-visible regression fixes for clock drivers. There is a memory leak fix for an ST platform, an infinite Loop Of Doom fix for the recent changes to the basic clock divider (hopefully the last fix for those recent changes) and some Tegra PLL changes which keep PCI from being hosed on that platform" * tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mike.turquette/linux: clk: st: Fix memory leak clk: divider: Fix table round up function clk: tegra: Fix enabling of PLLE clk: tegra: Introduce divider mask and shift helpers clk: tegra: Fix PLLE programming
2014-05-29firewire: revert to 4 GB RDMA, fix protocols using Memory SpaceStefan Richter2-3/+3
Undo a feature introduced in v3.14 by commit fcd46b34425d "firewire: Enable remote DMA above 4 GB". That change raised the minimum address at which protocol drivers and user programs can register for request reception from 0x0001'0000'0000 to 0x8000'0000'0000. It turned out that at least one vendor-specific protocol exists which uses lower addresses: https://bugzilla.kernel.org/show_bug.cgi?id=76921 For the time being, revert most of commit fcd46b34425d so that affected protocols work like with kernel v3.13 and before. Just keep the valid documentation parts from the regressing commit, and the ability to identify controllers which could be programmed to accept >32 bit physical DMA addresses. The rest of fcd46b34425d should probably be brought back as an optional instead of default feature. Reported-by: Fabien Spindler <fabien.spindler@inria.fr> Cc: <stable@vger.kernel.org> # 3.14+ Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2014-05-29md: always set MD_RECOVERY_INTR when interrupting a reshape thread.NeilBrown1-0/+1
Commit 8313b8e57f55b15e5b7f7fc5d1630bbf686a9a97 md: fix problem when adding device to read-only array with bitmap. added a called to md_reap_sync_thread() which cause a reshape thread to be interrupted (in particular, it could cause md_thread() to never even call md_do_sync()). However it didn't set MD_RECOVERY_INTR so ->finish_reshape() would not know that the reshape didn't complete. This only happens when mddev->ro is set and normally reshape threads don't run in that situation. But raid5 and raid10 can start a reshape thread during "run" is the array is in the middle of a reshape. They do this even if ->ro is set. So it is best to set MD_RECOVERY_INTR before abortingg the sync thread, just in case. Though it rare for this to trigger a problem it can cause data corruption because the reshape isn't finished properly. So it is suitable for any stable which the offending commit was applied to. (3.2 or later) Fixes: 8313b8e57f55b15e5b7f7fc5d1630bbf686a9a97 Cc: stable@vger.kernel.org (3.2+) Signed-off-by: NeilBrown <neilb@suse.de>
2014-05-28xhci: delete endpoints from bandwidth list before freeing whole deviceMathias Nyman1-10/+10
Lists of endpoints are stored for bandwidth calculation for roothub ports. Make sure we remove all endpoints from the list before the whole device, containing its endpoints list_head stuctures, is freed. This used to be done in the wrong order in xhci_mem_cleanup(), and triggered an oops in resume from S4 (hibernate). Cc: stable <stable@vger.kernel.org> Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-28staging: r8192e_pci: fix htons errorSean MacLennan1-1/+1
A sparse error fixup removed a htons() which is required for the driver to function. This patch puts the htons() back and fixes the sparse warning correctly by changing the left side cast. Signed-off-by: Sean MacLennan <seanm@seanm.ca> Cc: stable <stable@vger.kernel.org> # 3.14 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-28usb: pci-quirks: Prevent Sony VAIO t-series from switching usb portsMathias Nyman1-0/+7
Sony VAIO t-series machines are not capable of switching usb2 ports over from Intel EHCI to xHCI controller. If tried the USB2 port will be left unconnected and unusable. This patch should be backported to stable kernels as old as 3.12, that contain the commit 26b76798e0507429506b93cd49f8c4cfdab06896 "Intel xhci: refactor EHCI/xHCI port switching" Cc: stable <stable@vger.kernel.org> # 3.12 Reported-by: Jorge <xxopxe@gmail.com> Tested-by: Jorge <xxopxe@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-27Merge tag 'clk-tegra-fixes-3.15' of ↵Mike Turquette1-21/+43
git://nv-tegra.nvidia.com/user/pdeschrijver/linux into clk-fixes PLLE fixes for 3.15
2014-05-28md: always set MD_RECOVERY_INTR when aborting a reshape or other "resync".NeilBrown1-1/+3
If mddev->ro is set, md_to_sync will (correctly) abort. However in that case MD_RECOVERY_INTR isn't set. If a RESHAPE had been requested, then ->finish_reshape() will be called and it will think the reshape was successful even though nothing happened. Normally a resync will not be requested if ->ro is set, but if an array is stopped while a reshape is on-going, then when the array is started, the reshape will be restarted. If the array is also set read-only at this point, the reshape will instantly appear to success, resulting in data corruption. Consequently, this patch is suitable for any -stable kernel. Cc: stable@vger.kernel.org (any) Signed-off-by: NeilBrown <neilb@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-02 06:00:39 +0000