summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2021-09-23Merge tag 'net-5.15-rc3' of ↵Linus Torvalds84-233/+745
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Current release - regressions: - dsa: bcm_sf2: fix array overrun in bcm_sf2_num_active_ports() Previous releases - regressions: - introduce a shutdown method to mdio device drivers, and make DSA switch drivers compatible with masters disappearing on shutdown; preventing infinite reference wait - fix issues in mdiobus users related to ->shutdown vs ->remove - virtio-net: fix pages leaking when building skb in big mode - xen-netback: correct success/error reporting for the SKB-with-fraglist - dsa: tear down devlink port regions when tearing down the devlink port on error - nexthop: fix division by zero while replacing a resilient group - hns3: check queue, vf, vlan ids range before using Previous releases - always broken: - napi: fix race against netpoll causing NAPI getting stuck - mlx4_en: ensure link operstate is updated even if link comes up before netdev registration - bnxt_en: fix TX timeout when TX ring size is set to the smallest - enetc: fix illegal access when reading affinity_hint; prevent oops on sysfs access - mtk_eth_soc: avoid creating duplicate offload entries Misc: - core: correct the sock::sk_lock.owned lockdep annotations" * tag 'net-5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (51 commits) atlantic: Fix issue in the pm resume flow. net/mlx4_en: Don't allow aRFS for encapsulated packets net: mscc: ocelot: fix forwarding from BLOCKING ports remaining enabled net: ethernet: mtk_eth_soc: avoid creating duplicate offload entries nfc: st-nci: Add SPI ID matching DT compatible MAINTAINERS: remove Guvenc Gulce as net/smc maintainer nexthop: Fix memory leaks in nexthop notification chain listeners mptcp: ensure tx skbs always have the MPTCP ext qed: rdma - don't wait for resources under hw error recovery flow s390/qeth: fix deadlock during failing recovery s390/qeth: Fix deadlock in remove_discipline s390/qeth: fix NULL deref in qeth_clear_working_pool_list() net: dsa: realtek: register the MDIO bus under devres net: dsa: don't allocate the slave_mii_bus using devres Doc: networking: Fox a typo in ice.rst net: dsa: fix dsa_tree_setup error path net/smc: fix 'workqueue leaked lock' in smc_conn_abort_work net/smc: add missing error check in smc_clc_prfx_set() net: hns3: fix a return value error in hclge_get_reset_status() net: hns3: check vlan id before using it ...
2021-09-23atlantic: Fix issue in the pm resume flow.Sudarsana Reddy Kalluru1-2/+2
After fixing hibernation resume flow, another usecase was found which should be explicitly handled - resume when device is in "down" state. Invoke aq_nic_init jointly with aq_nic_start only if ndev was already up during suspend/hibernate. We still need to perform nic_deinit() if caller requests for it, to handle the freeze/resume scenarios. Fixes: 57f780f1c433 ("atlantic: Fix driver resume flow.") Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-23net/mlx4_en: Don't allow aRFS for encapsulated packetsAya Levin1-0/+3
Driver doesn't support aRFS for encapsulated packets, return early error in such a case. Fixes: 1eb8c695bda9 ("net/mlx4_en: Add accelerated RFS support") Signed-off-by: Aya Levin <ayal@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-23net: mscc: ocelot: fix forwarding from BLOCKING ports remaining enabledVladimir Oltean1-3/+8
The blamed commit made the fatally incorrect assumption that ports which aren't in the FORWARDING STP state should not have packets forwarded towards them, and that is all that needs to be done. However, that logic alone permits BLOCKING ports to forward to FORWARDING ports, which of course allows packet storms to occur when there is an L2 loop. The ocelot_get_bridge_fwd_mask should not only ask "what can the bridge do for you", but "what can you do for the bridge". This way, only FORWARDING ports forward to the other FORWARDING ports from the same bridging domain, and we are still compatible with the idea of multiple bridges. Fixes: df291e54ccca ("net: ocelot: support multiple bridges") Suggested-by: Colin Foster <colin.foster@in-advantage.com> Reported-by: Colin Foster <colin.foster@in-advantage.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-23net: ethernet: mtk_eth_soc: avoid creating duplicate offload entriesFelix Fietkau1-0/+3
Sometimes multiple CLS_REPLACE calls are issued for the same connection. rhashtable_insert_fast does not check for these duplicates, so multiple hardware flow entries can be created. Fix this by checking for an existing entry early Fixes: 502e84e2382d ("net: ethernet: mtk_eth_soc: add flow offloading support") Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-23nfc: st-nci: Add SPI ID matching DT compatibleMark Brown1-0/+1
Currently autoloading for SPI devices does not use the DT ID table, it uses SPI modalises. Supporting OF modalises is going to be difficult if not impractical, an attempt was made but has been reverted, so ensure that module autoloading works for this driver by adding the part name used in the compatible to the list of SPI IDs. Fixes: 96c8395e2166 ("spi: Revert modalias changes") Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-23nexthop: Fix memory leaks in nexthop notification chain listenersIdo Schimmel1-1/+1
syzkaller discovered memory leaks [1] that can be reduced to the following commands: # ip nexthop add id 1 blackhole # devlink dev reload pci/0000:06:00.0 As part of the reload flow, mlxsw will unregister its netdevs and then unregister from the nexthop notification chain. Before unregistering from the notification chain, mlxsw will receive delete notifications for nexthop objects using netdevs registered by mlxsw or their uppers. mlxsw will not receive notifications for nexthops using netdevs that are not dismantled as part of the reload flow. For example, the blackhole nexthop above that internally uses the loopback netdev as its nexthop device. One way to fix this problem is to have listeners flush their nexthop tables after unregistering from the notification chain. This is error-prone as evident by this patch and also not symmetric with the registration path where a listener receives a dump of all the existing nexthops. Therefore, fix this problem by replaying delete notifications for the listener being unregistered. This is symmetric to the registration path and also consistent with the netdev notification chain. The above means that unregister_nexthop_notifier(), like register_nexthop_notifier(), will have to take RTNL in order to iterate over the existing nexthops and that any callers of the function cannot hold RTNL. This is true for mlxsw and netdevsim, but not for the VXLAN driver. To avoid a deadlock, change the latter to unregister its nexthop listener without holding RTNL, making it symmetric to the registration path. [1] unreferenced object 0xffff88806173d600 (size 512): comm "syz-executor.0", pid 1290, jiffies 4295583142 (age 143.507s) hex dump (first 32 bytes): 41 9d 1e 60 80 88 ff ff 08 d6 73 61 80 88 ff ff A..`......sa.... 08 d6 73 61 80 88 ff ff 01 00 00 00 00 00 00 00 ..sa............ backtrace: [<ffffffff81a6b576>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline] [<ffffffff81a6b576>] slab_post_alloc_hook+0x96/0x490 mm/slab.h:522 [<ffffffff81a716d3>] slab_alloc_node mm/slub.c:3206 [inline] [<ffffffff81a716d3>] slab_alloc mm/slub.c:3214 [inline] [<ffffffff81a716d3>] kmem_cache_alloc_trace+0x163/0x370 mm/slub.c:3231 [<ffffffff82e8681a>] kmalloc include/linux/slab.h:591 [inline] [<ffffffff82e8681a>] kzalloc include/linux/slab.h:721 [inline] [<ffffffff82e8681a>] mlxsw_sp_nexthop_obj_group_create drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:4918 [inline] [<ffffffff82e8681a>] mlxsw_sp_nexthop_obj_new drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:5054 [inline] [<ffffffff82e8681a>] mlxsw_sp_nexthop_obj_event+0x59a/0x2910 drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:5239 [<ffffffff813ef67d>] notifier_call_chain+0xbd/0x210 kernel/notifier.c:83 [<ffffffff813f0662>] blocking_notifier_call_chain kernel/notifier.c:318 [inline] [<ffffffff813f0662>] blocking_notifier_call_chain+0x72/0xa0 kernel/notifier.c:306 [<ffffffff8384b9c6>] call_nexthop_notifiers+0x156/0x310 net/ipv4/nexthop.c:244 [<ffffffff83852bd8>] insert_nexthop net/ipv4/nexthop.c:2336 [inline] [<ffffffff83852bd8>] nexthop_add net/ipv4/nexthop.c:2644 [inline] [<ffffffff83852bd8>] rtm_new_nexthop+0x14e8/0x4d10 net/ipv4/nexthop.c:2913 [<ffffffff833e9a78>] rtnetlink_rcv_msg+0x448/0xbf0 net/core/rtnetlink.c:5572 [<ffffffff83608703>] netlink_rcv_skb+0x173/0x480 net/netlink/af_netlink.c:2504 [<ffffffff833de032>] rtnetlink_rcv+0x22/0x30 net/core/rtnetlink.c:5590 [<ffffffff836069de>] netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline] [<ffffffff836069de>] netlink_unicast+0x5ae/0x7f0 net/netlink/af_netlink.c:1340 [<ffffffff83607501>] netlink_sendmsg+0x8e1/0xe30 net/netlink/af_netlink.c:1929 [<ffffffff832fde84>] sock_sendmsg_nosec net/socket.c:704 [inline] [<ffffffff832fde84>] sock_sendmsg net/socket.c:724 [inline] [<ffffffff832fde84>] ____sys_sendmsg+0x874/0x9f0 net/socket.c:2409 [<ffffffff83304a44>] ___sys_sendmsg+0x104/0x170 net/socket.c:2463 [<ffffffff83304c01>] __sys_sendmsg+0x111/0x1f0 net/socket.c:2492 [<ffffffff83304d5d>] __do_sys_sendmsg net/socket.c:2501 [inline] [<ffffffff83304d5d>] __se_sys_sendmsg net/socket.c:2499 [inline] [<ffffffff83304d5d>] __x64_sys_sendmsg+0x7d/0xc0 net/socket.c:2499 Fixes: 2a014b200bbd ("mlxsw: spectrum_router: Add support for nexthop objects") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-22Merge tag 'spi-fix-v5.15-rc1' of ↵Linus Torvalds1-8/+0
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi modalias fix from Mark Brown: "Fix modalias issues As reported by Russell King the change to use OF style modaliases for DT enumerated broke at least the spi-nor driver, the patch here reverts that change to fix the regression. Sadly this will mean that anything that started loading since the change to OF modaliases will run into issues, there doesn't seem to be any approach which doesn't cause some problems and thi seems like the least bad approach - gory details are in the commit log for the change. I'm currently working through the SPI drivers to add ID tables and missing IDs to tables which should address things from the other end, this seems more straightforward and robust than any other options" * tag 'spi-fix-v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: Revert modalias changes
2021-09-22Merge tag 'platform-drivers-x86-v5.15-2' of ↵Linus Torvalds7-15/+77
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: "The first round of bug-fixes for platform-drivers-x86 for 5.15, highlights: - amd-pmc fix for some suspend/resume issues - intel-hid fix to avoid false-positive SW_TABLET_MODE=1 reporting - some build error/warning fixes - various DMI quirk additions" * tag 'platform-drivers-x86-v5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: gigabyte-wmi: add support for B550I Aorus Pro AX platform/x86/intel: hid: Add DMI switches allow list platform/x86: dell: fix DELL_WMI_PRIVACY dependencies & build error platform/x86: amd-pmc: Increase the response register timeout platform/x86: touchscreen_dmi: Update info for the Chuwi Hi10 Plus (CWI527) tablet platform/x86: touchscreen_dmi: Add info for the Chuwi HiBook (CWI514) tablet lg-laptop: Correctly handle dmi_get_system_info() returning NULL platform/x86/intel: punit_ipc: Drop wrong use of ACPI_PTR()
2021-09-22qed: rdma - don't wait for resources under hw error recovery flowShai Malin2-0/+16
If the HW device is during recovery, the HW resources will never return, hence we shouldn't wait for the CID (HW context ID) bitmaps to clear. This fix speeds up the error recovery flow. Fixes: 64515dc899df ("qed: Add infrastructure for error detection and recovery") Signed-off-by: Michal Kalderon <mkalderon@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-21s390/qeth: fix deadlock during failing recoveryAlexandra Winter2-3/+10
Commit 0b9902c1fcc5 ("s390/qeth: fix deadlock during recovery") removed taking discipline_mutex inside qeth_do_reset(), fixing potential deadlocks. An error path was missed though, that still takes discipline_mutex and thus has the original deadlock potential. Intermittent deadlocks were seen when a qeth channel path is configured offline, causing a race between qeth_do_reset and ccwgroup_remove. Call qeth_set_offline() directly in the qeth_do_reset() error case and then a new variant of ccwgroup_set_offline(), without taking discipline_mutex. Fixes: b41b554c1ee7 ("s390/qeth: fix locking for discipline setup / removal") Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-21s390/qeth: Fix deadlock in remove_disciplineAlexandra Winter4-15/+4
Problem: qeth_close_dev_handler is a worker that tries to acquire card->discipline_mutex via drv->set_offline() in ccwgroup_set_offline(). Since commit b41b554c1ee7 ("s390/qeth: fix locking for discipline setup / removal") qeth_remove_discipline() is called under card->discipline_mutex and cancels the work and waits for it to finish. STOPLAN reception with reason code IPA_RC_VEPA_TO_VEB_TRANSITION is the only situation that schedules close_dev_work. In that situation scheduling qeth recovery will also result in an offline interface, when resetting the isolation mode fails, if the external switch is still set to VEB. And since commit 0b9902c1fcc5 ("s390/qeth: fix deadlock during recovery") qeth recovery does not aquire card->discipline_mutex anymore. So we accept the longer pathlength of qeth_schedule_recovery in this error situation and re-use the existing function. As a side-benefit this changes the hwtrap to behave like during recovery instead of like during a user-triggered set_offline. Fixes: b41b554c1ee7 ("s390/qeth: fix locking for discipline setup / removal") Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Acked-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-21s390/qeth: fix NULL deref in qeth_clear_working_pool_list()Julian Wiedmann1-0/+3
When qeth_set_online() calls qeth_clear_working_pool_list() to roll back after an error exit from qeth_hardsetup_card(), we are at risk of accessing card->qdio.in_q before it was allocated by qeth_alloc_qdio_queues() via qeth_mpc_initialize(). qeth_clear_working_pool_list() then dereferences NULL, and by writing to queue->bufs[i].pool_entry scribbles all over the CPU's lowcore. Resulting in a crash when those lowcore areas are used next (eg. on the next machine-check interrupt). Such a scenario would typically happen when the device is first set online and its queues aren't allocated yet. An early IO error or certain misconfigs (eg. mismatched transport mode, bad portno) then cause us to error out from qeth_hardsetup_card() with card->qdio.in_q still being NULL. Fix it by checking the pointer for NULL before accessing it. Note that we also have (rare) paths inside qeth_mpc_initialize() where a configuration change can cause us to free the existing queues, expecting that subsequent code will allocate them again. If we then error out before that re-allocation happens, the same bug occurs. Fixes: eff73e16ee11 ("s390/qeth: tolerate pre-filled RX buffer") Reported-by: Stefan Raspl <raspl@linux.ibm.com> Root-caused-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-21spi: Revert modalias changesMark Brown1-8/+0
During the v5.13 cycle we updated the SPI subsystem to generate OF style modaliases for SPI devices, replacing the old Linux style modalises we used to generate based on spi_device_id which are the DT style name with the vendor removed. Unfortunately this means that we start only reporting OF style modalises and not the old ones and there is nothing that ensures that drivers list every possible OF compatible string in their OF ID table. The result is that there are systems which have been relying on loading modules based on the old style that are now broken, as found by Russell King with spi-nor on Macchiatobin. spi-nor is a particularly problematic case for this, it only lists a single generic DT compatible jedec,spi-nor in the driver but supports a huge raft of device specific compatibles, with a large set of part numbers many of which are offered by multiple vendors. Russell's searches of upstream device trees has turned up examples with vendor names written in non-standard ways too. To make matters worse up until 8ff16cf77ce3 ("Documentation: devicetree: m25p80: add "nor-jedec" binding") the generic compatible was not part of the binding so there are device trees out there written to that binding version which don't list it all. The sheer number of parts supported together with our previous approach of ignoring the vendor ID makes robustly fixing this by adding compatibles to the spi-nor driver seem problematic, the current DT binding document does not list all the parts supported by the driver at the minute (further patches will fix this). I've also investigated supporting both formats of modalias simultaneously but that doesn't seem possible, especially without breaking our userspace ABI which is obviously not viable. Instead revert the relevant changes for now: e09f2ab8eecc ("spi: update modalias_show after of_device_uevent_modalias support") 3ce6c9e2617e ("spi: add of_device_uevent_modalias support") This will unfortunately mean that any system which had started having modules autoload based on the OF compatibles for drivers that list things there but not in the spi_device_ids will now not have those modules load which is itself a regression. Since it affects a narrower time window and the particularly problematic spi-nor driver may be critical to system boot on smaller systems this seems the best of a series of bad options. I will start an audit of SPI drivers to identify and fix cases where things won't autoload using spi_device_id, this is not great but seems to be the best way forward that anyone has been able to identify. Thanks to Russell for both his report and the additional diagnostic and analysis work he has done here, the detailed research above was his work. Fixes: e09f2ab8eecc ("spi: update modalias_show after of_device_uevent_modalias support") Fixes: 3ce6c9e2617e ("spi: add of_device_uevent_modalias support") Reported-by: Russell King (Oracle) <linux@armlinux.org.uk> Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk> Signed-off-by: Mark Brown <broonie@kernel.org> Tested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Cc: Andreas Schwab <schwab@suse.de> Cc: Marco Felsch <m.felsch@pengutronix.de>
2021-09-21platform/x86: gigabyte-wmi: add support for B550I Aorus Pro AXTobias Jakobi1-0/+1
Tested with a AMD Ryzen 7 5800X. Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Acked-by: Thomas Weißschuh <thomas@weissschuh.net> Link: https://lore.kernel.org/r/20210921100702.3838-1-tjakobi@math.uni-bielefeld.de Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-09-21platform/x86/intel: hid: Add DMI switches allow listJosé Expósito1-5/+22
Some devices, even non convertible ones, can send incorrect SW_TABLET_MODE reports. Add an allow list and accept such reports only from devices in it. Bug reported for Dell XPS 17 9710 on: https://gitlab.freedesktop.org/libinput/libinput/-/issues/662 Reported-by: Tobias Gurtzick <magic@wizardtales.com> Suggested-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Tobias Gurtzick <magic@wizardtales.com> Signed-off-by: José Expósito <jose.exposito89@gmail.com> Link: https://lore.kernel.org/r/20210920160312.9787-1-jose.exposito89@gmail.com [hdegoede@redhat.com: Check dmi_switches_auto_add_allow_list only once] Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-09-21platform/x86: dell: fix DELL_WMI_PRIVACY dependencies & build errorRandy Dunlap1-2/+1
When DELL_WMI=y, DELL_WMI_PRIVACY=y, and LEDS_TRIGGER_AUDIO=m, there is a linker error since the LEDS trigger code is built as a loadable module. This happens because DELL_WMI_PRIVACY is a bool that depends on a tristate (LEDS_TRIGGER_AUDIO=m), which can be dangerous. ld: drivers/platform/x86/dell/dell-wmi-privacy.o: in function `dell_privacy_wmi_probe': dell-wmi-privacy.c:(.text+0x3df): undefined reference to `ledtrig_audio_get' Fixes: 8af9fa37b8a3 ("platform/x86: dell-privacy: Add support for Dell hardware privacy") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Perry Yuan <Perry.Yuan@dell.com> Cc: Dell.Client.Kernel@dell.com Cc: platform-driver-x86@vger.kernel.org Cc: Hans de Goede <hdegoede@redhat.com> Cc: Mark Gross <mgross@linux.intel.com> Link: https://lore.kernel.org/r/20210918044829.19222-1-rdunlap@infradead.org Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-09-21net: dsa: realtek: register the MDIO bus under devresVladimir Oltean1-1/+1
The Linux device model permits both the ->shutdown and ->remove driver methods to get called during a shutdown procedure. Example: a DSA switch which sits on an SPI bus, and the SPI bus driver calls this on its ->shutdown method: spi_unregister_controller -> device_for_each_child(&ctlr->dev, NULL, __unregister); -> spi_unregister_device(to_spi_device(dev)); -> device_del(&spi->dev); So this is a simple pattern which can theoretically appear on any bus, although the only other buses on which I've been able to find it are I2C: i2c_del_adapter -> device_for_each_child(&adap->dev, NULL, __unregister_client); -> i2c_unregister_device(client); -> device_unregister(&client->dev); The implication of this pattern is that devices on these buses can be unregistered after having been shut down. The drivers for these devices might choose to return early either from ->remove or ->shutdown if the other callback has already run once, and they might choose that the ->shutdown method should only perform a subset of the teardown done by ->remove (to avoid unnecessary delays when rebooting). So in other words, the device driver may choose on ->remove to not do anything (therefore to not unregister an MDIO bus it has registered on ->probe), because this ->remove is actually triggered by the device_shutdown path, and its ->shutdown method has already run and done the minimally required cleanup. This used to be fine until the blamed commit, but now, the following BUG_ON triggers: void mdiobus_free(struct mii_bus *bus) { /* For compatibility with error handling in drivers. */ if (bus->state == MDIOBUS_ALLOCATED) { kfree(bus); return; } BUG_ON(bus->state != MDIOBUS_UNREGISTERED); bus->state = MDIOBUS_RELEASED; put_device(&bus->dev); } In other words, there is an attempt to free an MDIO bus which was not unregistered. The attempt to free it comes from the devres release callbacks of the SPI device, which are executed after the device is unregistered. I'm not saying that the fact that MDIO buses allocated using devres would automatically get unregistered wasn't strange. I'm just saying that the commit didn't care about auditing existing call paths in the kernel, and now, the following code sequences are potentially buggy: (a) devm_mdiobus_alloc followed by plain mdiobus_register, for a device located on a bus that unregisters its children on shutdown. After the blamed patch, either both the alloc and the register should use devres, or none should. (b) devm_mdiobus_alloc followed by plain mdiobus_register, and then no mdiobus_unregister at all in the remove path. After the blamed patch, nobody unregisters the MDIO bus anymore, so this is even more buggy than the previous case which needs a specific bus configuration to be seen, this one is an unconditional bug. In this case, the Realtek drivers fall under category (b). To solve it, we can register the MDIO bus under devres too, which restores the previous behavior. Fixes: ac3a68d56651 ("net: phy: don't abuse devres in devm_mdiobus_register()") Reported-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Reported-by: Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-20Merge tag 'spi-fix-v5.15-rc2' of ↵Linus Torvalds2-5/+10
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark BrownL "This contains a couple of fixes, one fix for handling of zero length transfers on Rockchip devices and a warning fix which will conflict with a version you did but cleans up some extra unneeded forward declarations as well which seems a bit neater" * tag 'spi-fix-v5.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: tegra20-slink: Declare runtime suspend and resume functions conditionally spi: rockchip: handle zero length transfers without timing out
2021-09-20Merge tag 'regulator-fix-v5.15-rc2' of ↵Linus Torvalds2-3/+1
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "A couple of small device specific fixes that have been sent since the merge window, neither of which stands out particularly" * tag 'regulator-fix-v5.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: max14577: Revert "regulator: max14577: Add proper module aliases strings" regulator: qcom-rpmh-regulator: fix pm8009-1 ldo7 resource name
2021-09-20drm/nouveau/nvkm: Replace -ENOSYS with -ENODEVGuenter Roeck1-1/+1
nvkm test builds fail with the following error. drivers/gpu/drm/nouveau/nvkm/engine/device/ctrl.c: In function 'nvkm_control_mthd_pstate_info': drivers/gpu/drm/nouveau/nvkm/engine/device/ctrl.c:60:35: error: overflow in conversion from 'int' to '__s8' {aka 'signed char'} changes value from '-251' to '5' The code builds on most architectures, but fails on parisc where ENOSYS is defined as 251. Replace the error code with -ENODEV (-19). The actual error code does not really matter and is not passed to userspace - it just has to be negative. Fixes: 7238eca4cf18 ("drm/nouveau: expose pstate selection per-power source in sysfs") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-20net: hns3: fix a return value error in hclge_get_reset_status()Yufeng Mo1-4/+11
hclge_get_reset_status() should return the tqp reset status. However, if the CMDQ fails, the caller will take it as tqp reset success status by mistake. Therefore, uses a parameters to get the tqp reset status instead. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-20net: hns3: check vlan id before using itliaoguojia1-0/+3
The input parameters may not be reliable, so check the vlan id before using it, otherwise may set wrong vlan id into hardware. Fixes: dc8131d846d4 ("net: hns3: Fix for packet loss due wrong filter config in VLAN tbls") Signed-off-by: liaoguojia <liaoguojia@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-20net: hns3: check queue id range before usingYufeng Mo1-0/+8
The input parameters may not be reliable. Before using the queue id, we should check this parameter. Otherwise, memory overwriting may occur. Fixes: d34100184685 ("net: hns3: refactor the mailbox message between PF and VF") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-20net: hns3: fix misuse vf id and vport id in some logsJiaran Zhang4-10/+12
vport_id include PF and VFs, vport_id = 0 means PF, other values mean VFs. So the actual vf id is equal to vport_id minus 1. Some VF print logs are actually vport, and logs of vf id actually use vport id, so this patch fixes them. Fixes: ac887be5b0fe ("net: hns3: change print level of RAS error log from warning to error") Fixes: adcf738b804b ("net: hns3: cleanup some print format warning") Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-20net: hns3: fix inconsistent vf id printJian Shen1-2/+5
The vf id from ethtool is added 1 before configured to driver. So it's necessary to minus 1 when printing it, in order to keep consistent with user's configuration. Fixes: dd74f815dd41 ("net: hns3: Add support for rule add/delete for flow director") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-20net: hns3: fix change RSS 'hfunc' ineffective issueJian Shen2-33/+64
When user change rss 'hfunc' without set rss 'hkey' by ethtool -X command, the driver will ignore the 'hfunc' for the hkey is NULL. It's unreasonable. So fix it. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Fixes: 374ad291762a ("net: hns3: Add RSS general configuration support for VF") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-20ptp: ocp: add COMMON_CLK dependencyArnd Bergmann1-0/+1
Without CONFIG_COMMON_CLK, this fails to link: arm-linux-gnueabi-ld: drivers/ptp/ptp_ocp.o: in function `ptp_ocp_register_i2c': ptp_ocp.c:(.text+0xcc0): undefined reference to `__clk_hw_register_fixed_rate' arm-linux-gnueabi-ld: ptp_ocp.c:(.text+0xcf4): undefined reference to `devm_clk_hw_register_clkdev' arm-linux-gnueabi-ld: drivers/ptp/ptp_ocp.o: in function `ptp_ocp_detach': ptp_ocp.c:(.text+0x1c24): undefined reference to `clk_hw_unregister_fixed_rate' Fixes: a7e1abad13f3 ("ptp: Add clock driver for the OpenCompute TimeCard.") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-20bnxt_en: Fix TX timeout when TX ring size is set to the smallestMichael Chan3-5/+10
The smallest TX ring size we support must fit a TX SKB with MAX_SKB_FRAGS + 1. Because the first TX BD for a packet is always a long TX BD, we need an extra TX BD to fit this packet. Define BNXT_MIN_TX_DESC_CNT with this value to make this more clear. The current code uses a minimum that is off by 1. Fix it using this constant. The tx_wake_thresh to determine when to wake up the TX queue is half the ring size but we must have at least BNXT_MIN_TX_DESC_CNT for the next packet which may have maximum fragments. So the comparison of the available TX BDs with tx_wake_thresh should be >= instead of > in the current code. Otherwise, at the smallest ring size, we will never wake up the TX queue and will cause TX timeout. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadocm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-19dmascc: use proper 'virt_to_bus()' rather than casting to 'int'Linus Torvalds1-3/+3
The old dmascc driver depends on the legacy ISA_DMA_API, and blindly just casts the kernel virtual address to 'int' for set_dma_addr(). That works only incidentally, and because the high bits of the address will be ignored anyway. And on 64-bit architectures it causes warnings. Admittedly, 64-bit architectures with ISA are basically dead - I think the only example of this is alpha, and nobody would ever use the dmascc driver there. But hey, the fix is easy enough, the end result is cleaner, and it's yet another configuration that now builds without warnings. If somebody actually uses this driver on an alpha and this fixes it for you, please email me. Because that is just incredibly bizarre. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-19Revert "drm/vc4: hdmi: Remove drm_encoder->crtc usage"Linus Torvalds1-27/+13
This reverts commit 27da370e0fb343a0baf308f503bb3e5dcdfe3362. Sudip Mukherjee reports that this broke pulseaudio with a NULL pointer dereference in vc4_hdmi_audio_prepare(), bisected it to this commit, and confirmed that a revert fixed the problem. Revert the problematic commit until fixed. Link: https://lore.kernel.org/all/CADVatmPB9-oKd=ypvj25UYysVo6EZhQ6bCM7EvztQBMyiZfAyw@mail.gmail.com/ Link: https://lore.kernel.org/all/CADVatmN5EpRshGEPS_JozbFQRXg5w_8LFB3OMP1Ai-ghxd3w4g@mail.gmail.com/ Reported-and-tested-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Emma Anholt <emma@anholt.net> Cc: Dave Airlie <airlied@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-19Revert drm/vc4 hdmi runtime PM changesLinus Torvalds1-34/+10
This reverts commits 9984d6664ce9 ("drm/vc4: hdmi: Make sure the controller is powered in detect") 411efa18e4b0 ("drm/vc4: hdmi: Move the HSM clock enable to runtime_pm") as Michael Stapelberg reports that the new runtime PM changes cause his Raspberry Pi 3 to hang on boot, probably due to interactions with other changes in the DRM tree (because a bisect points to the merge in commit e058a84bfddc: "Merge tag 'drm-next-2021-07-01' of git://.../drm"). Revert these two commits until it's been resolved. Link: https://lore.kernel.org/all/871r5mp7h2.fsf@midna.i-did-not-set--mail-host-address--so-tickle-me/ Reported-and-tested-by: Michael Stapelberg <michael@stapelberg.ch> Cc: Maxime Ripard <maxime@cerno.tech> Cc: Dave Stevenson <dave.stevenson@raspberrypi.com> Cc: Dave Airlie <airlied@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-19net/mlx4_en: Resolve bad operstate valueLama Kayal2-19/+29
Any link state change that's done prior to net device registration isn't reflected on the state, thus the operational state is left obsolete, with 'UNKNOWN' status. To resolve the issue, query link state from FW upon open operations to ensure operational state is updated. Fixes: c27a02cd94d6 ("mlx4_en: Add driver for Mellanox ConnectX 10GbE NIC") Signed-off-by: Lama Kayal <lkayal@nvidia.com> Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-19net: bgmac-bcma: handle deferred probe error due to mac-addressChristian Lamparter1-0/+2
Due to the inclusion of nvmem handling into the mac-address getter function of_get_mac_address() by commit d01f449c008a ("of_net: add NVMEM support to of_get_mac_address") it is now possible to get a -EPROBE_DEFER return code. Which did cause bgmac to assign a random ethernet address. This exact issue happened on my Meraki MR32. The nvmem provider is an EEPROM (at24c64) which gets instantiated once the module driver is loaded... This happens once the filesystem becomes available. With this patch, bgmac_probe() will propagate the -EPROBE_DEFER error. Then the driver subsystem will reschedule the probe at a later time. Cc: Petr Štetiar <ynezz@true.cz> Cc: Michael Walle <michael@walle.cc> Fixes: d01f449c008a ("of_net: add NVMEM support to of_get_mac_address") Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-19net: dsa: tear down devlink port regions when tearing down the devlink port ↵Vladimir Oltean3-68/+27
on error Commit 86f8b1c01a0a ("net: dsa: Do not make user port errors fatal") decided it was fine to ignore errors on certain ports that fail to probe, and go on with the ports that do probe fine. Commit fb6ec87f7229 ("net: dsa: Fix type was not set for devlink port") noticed that devlink_port_type_eth_set(dlp, dp->slave); does not get called, and devlink notices after a timeout of 3600 seconds and prints a WARN_ON. So it went ahead to unregister the devlink port. And because there exists an UNUSED port flavour, we actually re-register the devlink port as UNUSED. Commit 08156ba430b4 ("net: dsa: Add devlink port regions support to DSA") added devlink port regions, which are set up by the driver and not by DSA. When we trigger the devlink port deregistration and reregistration as unused, devlink now prints another WARN_ON, from here: devlink_port_unregister: WARN_ON(!list_empty(&devlink_port->region_list)); So the port still has regions, which makes sense, because they were set up by the driver, and the driver doesn't know we're unregistering the devlink port. Somebody needs to tear them down, and optionally (actually it would be nice, to be consistent) set them up again for the new devlink port. But DSA's layering stays in our way quite badly here. The options I've considered are: 1. Introduce a function in devlink to just change a port's type and flavour. No dice, devlink keeps a lot of state, it really wants the port to not be registered when you set its parameters, so changing anything can only be done by destroying what we currently have and recreating it. 2. Make DSA cache the parameters passed to dsa_devlink_port_region_create, and the region returned, keep those in a list, then when the devlink port unregister needs to take place, the existing devlink regions are destroyed by DSA, and we replay the creation of new regions using the cached parameters. Problem: mv88e6xxx keeps the region pointers in chip->ports[port].region, and these will remain stale after DSA frees them. There are many things DSA can do, but updating mv88e6xxx's private pointers is not one of them. 3. Just let the driver do it (i.e. introduce a very specific method called ds->ops->port_reinit_as_unused, which unregisters its devlink port devlink regions, then the old devlink port, then registers the new one, then the devlink port regions for it). While it does work, as opposed to the others, it's pretty horrible from an API perspective and we can do better. 4. Introduce a new pair of methods, ->port_setup and ->port_teardown, which in the case of mv88e6xxx must register and unregister the devlink port regions. Call these 2 methods when the port must be reinitialized as unused. Naturally, I went for the 4th approach. Fixes: 08156ba430b4 ("net: dsa: Add devlink port regions support to DSA") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-19net: freescale: drop unneeded MODULE_ALIASKrzysztof Kozlowski1-1/+0
The MODULE_DEVICE_TABLE already creates proper alias for platform driver. Having another MODULE_ALIAS causes the alias to be duplicated. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-19net: mscc: ocelot: remove buggy duplicate write to DEV_CLOCK_CFGColin Foster1-6/+0
When updating ocelot to use phylink, a second write to DEV_CLOCK_CFG was mistakenly left in. It used the variable "speed" which, previously, would would have been assigned a value of OCELOT_SPEED_1000. In phylink the variable is be SPEED_1000, which is invalid for the DEV_CLOCK_LINK_SPEED macro. Removing it as unnecessary and buggy. Fixes: e6e12df625f2 ("net: mscc: ocelot: convert to phylink") Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-19net: mscc: ocelot: remove buggy and useless write to ANA_PFC_PFC_CFGColin Foster1-4/+0
A useless write to ANA_PFC_PFC_CFG was left in while refactoring ocelot to phylink. Since priority flow control is disabled, writing the speed has no effect. Further, it was using ethtool.h SPEED_ instead of OCELOT_SPEED_ macros, which are incorrectly offset for GENMASK. Lastly, for priority flow control to properly function, some scenarios would rely on the rate adaptation from the PCS while the MAC speed would be fixed. So it isn't used, and even if it was, neither "speed" nor "mac_speed" are necessarily the correct values to be used. Fixes: e6e12df625f2 ("net: mscc: ocelot: convert to phylink") Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-19igc: fix build errors for PTPRandy Dunlap1-0/+1
When IGC=y and PTP_1588_CLOCK=m, the ptp_*() interface family is not available to the igc driver. Make this driver depend on PTP_1588_CLOCK_OPTIONAL so that it will build without errors. Various igc commits have used ptp_*() functions without checking that PTP_1588_CLOCK is enabled. Fix all of these here. Fixes these build errors: ld: drivers/net/ethernet/intel/igc/igc_main.o: in function `igc_msix_other': igc_main.c:(.text+0x6494): undefined reference to `ptp_clock_event' ld: igc_main.c:(.text+0x64ef): undefined reference to `ptp_clock_event' ld: igc_main.c:(.text+0x6559): undefined reference to `ptp_clock_event' ld: drivers/net/ethernet/intel/igc/igc_ethtool.o: in function `igc_ethtool_get_ts_info': igc_ethtool.c:(.text+0xc7a): undefined reference to `ptp_clock_index' ld: drivers/net/ethernet/intel/igc/igc_ptp.o: in function `igc_ptp_feature_enable_i225': igc_ptp.c:(.text+0x330): undefined reference to `ptp_find_pin' ld: igc_ptp.c:(.text+0x36f): undefined reference to `ptp_find_pin' ld: drivers/net/ethernet/intel/igc/igc_ptp.o: in function `igc_ptp_init': igc_ptp.c:(.text+0x11cd): undefined reference to `ptp_clock_register' ld: drivers/net/ethernet/intel/igc/igc_ptp.o: in function `igc_ptp_stop': igc_ptp.c:(.text+0x12dd): undefined reference to `ptp_clock_unregister' ld: drivers/platform/x86/dell/dell-wmi-privacy.o: in function `dell_privacy_wmi_probe': Fixes: 64433e5bf40ab ("igc: Enable internal i225 PPS") Fixes: 60dbede0c4f3d ("igc: Add support for ethtool GET_TS_INFO command") Fixes: 87938851b6efb ("igc: enable auxiliary PHC functions for the i225") Fixes: 5f2958052c582 ("igc: Add basic skeleton for PTP") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Ederson de Souza <ederson.desouza@intel.com> Cc: Tony Nguyen <anthony.l.nguyen@intel.com> Cc: Vinicius Costa Gomes <vinicius.gomes@intel.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: intel-wired-lan@lists.osuosl.org Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-19enetc: Fix uninitialized struct dim_sample field usageClaudiu Manoil1-1/+1
The only struct dim_sample member that does not get initialized by dim_update_sample() is comp_ctr. (There is special API to initialize comp_ctr: dim_update_sample_with_comps(), and it is currently used only for RDMA.) comp_ctr is used to compute curr_stats->cmps and curr_stats->cpe_ratio (see dim_calc_stats()) which in turn are consumed by the rdma_dim_*() API. Therefore, functionally, the net_dim*() API consumers are not affected. Nevertheless, fix the computation of statistics based on an uninitialized variable, even if the mentioned statistics are not used at the moment. Fixes: ae0e6a5d1627 ("enetc: Add adaptive interrupt coalescing") Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-19enetc: Fix illegal access when reading affinity_hintClaudiu Manoil1-4/+1
irq_set_affinity_hit() stores a reference to the cpumask_t parameter in the irq descriptor, and that reference can be accessed later from irq_affinity_hint_proc_show(). Since the cpu_mask parameter passed to irq_set_affinity_hit() has only temporary storage (it's on the stack memory), later accesses to it are illegal. Thus reads from the corresponding procfs affinity_hint file can result in paging request oops. The issue is fixed by the get_cpu_mask() helper, which provides a permanent storage for the cpumask_t parameter. Fixes: d4fd0404c1c9 ("enetc: Introduce basic PF and VF ENETC ethernet drivers") Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-19virtio-net: fix pages leaking when building skb in big modeJason Wang1-0/+4
We try to use build_skb() if we had sufficient tailroom. But we forget to release the unused pages chained via private in big mode which will leak pages. Fixing this by release the pages after building the skb in big mode. Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Fixes: fb32856b16ad ("virtio-net: page_to_skb() use build_skb when there's sufficient tailroom") Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-19xen-netback: correct success/error reporting for the SKB-with-fraglist caseJan Beulich1-1/+1
When re-entering the main loop of xenvif_tx_check_gop() a 2nd time, the special considerations for the head of the SKB no longer apply. Don't mistakenly report ERROR to the frontend for the first entry in the list, even if - from all I can tell - this shouldn't matter much as the overall transmit will need to be considered failed anyway. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Paul Durrant <paul@xen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-19net: dsa: xrs700x: be compatible with masters which unregister on shutdownVladimir Oltean4-0/+43
Since commit 2f1e8ea726e9 ("net: dsa: link interfaces with the DSA master to get rid of lockdep warnings"), DSA gained a requirement which it did not fulfill, which is to unlink itself from the DSA master at shutdown time. Since the Arrow SpeedChips XRS700x driver was introduced after the bad commit, it has never worked with DSA masters which decide to unregister their net_device on shutdown, effectively hanging the reboot process. To fix that, we need to call dsa_switch_shutdown. These devices can be connected by I2C or by MDIO, and if I search for I2C or MDIO bus drivers that implement their ->shutdown by redirecting it to ->remove I don't see any, however this does not mean it would not be possible. To be compatible with that pattern, it is necessary to implement an "if this then not that" scheme, to avoid ->remove and ->shutdown from being called both for the same struct device. Fixes: ee00b24f32eb ("net: dsa: add Arrow SpeedChips XRS700x driver") Link: https://lore.kernel.org/netdev/20210909095324.12978-1-LinoSanfilippo@gmx.de/ Reported-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-19net: dsa: microchip: ksz8863: be compatible with masters which unregister on ↵Vladimir Oltean1-0/+13
shutdown Since commit 2f1e8ea726e9 ("net: dsa: link interfaces with the DSA master to get rid of lockdep warnings"), DSA gained a requirement which it did not fulfill, which is to unlink itself from the DSA master at shutdown time. Since the Microchip sub-driver for KSZ8863 was introduced after the bad commit, it has never worked with DSA masters which decide to unregister their net_device on shutdown, effectively hanging the reboot process. To fix that, we need to call dsa_switch_shutdown. Since this driver expects the MDIO bus to be backed by mdio_bitbang, I don't think there is currently any MDIO bus driver which implements its ->shutdown by redirecting it to ->remove, but in any case, to be compatible with that pattern, it is necessary to implement an "if this then not that" scheme, to avoid ->remove and ->shutdown from being called both for the same struct device. Fixes: 60a364760002 ("net: dsa: microchip: Add Microchip KSZ8863 SMI based driver support") Link: https://lore.kernel.org/netdev/20210909095324.12978-1-LinoSanfilippo@gmx.de/ Reported-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-19net: dsa: hellcreek: be compatible with masters which unregister on shutdownVladimir Oltean1-0/+16
Since commit 2f1e8ea726e9 ("net: dsa: link interfaces with the DSA master to get rid of lockdep warnings"), DSA gained a requirement which it did not fulfill, which is to unlink itself from the DSA master at shutdown time. Since the hellcreek driver was introduced after the bad commit, it has never worked with DSA masters which decide to unregister their net_device on shutdown, effectively hanging the reboot process. Hellcreek is a platform device driver, so we probably cannot have the oddities of ->shutdown and ->remove getting both called for the exact same struct device. But to be in line with the pattern from the other device drivers which are on slow buses, implement the same "if this then not that" pattern of either running the ->shutdown or the ->remove hook. The driver's current ->remove implementation makes that very easy because it already zeroes out its device_drvdata on ->remove. Fixes: e4b27ebc780f ("net: dsa: Add DSA driver for Hirschmann Hellcreek switches") Link: https://lore.kernel.org/netdev/20210909095324.12978-1-LinoSanfilippo@gmx.de/ Reported-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-19net: dsa: be compatible with masters which unregister on shutdownVladimir Oltean28-24/+406
Lino reports that on his system with bcmgenet as DSA master and KSZ9897 as a switch, rebooting or shutting down never works properly. What does the bcmgenet driver have special to trigger this, that other DSA masters do not? It has an implementation of ->shutdown which simply calls its ->remove implementation. Otherwise said, it unregisters its network interface on shutdown. This message can be seen in a loop, and it hangs the reboot process there: unregister_netdevice: waiting for eth0 to become free. Usage count = 3 So why 3? A usage count of 1 is normal for a registered network interface, and any virtual interface which links itself as an upper of that will increment it via dev_hold. In the case of DSA, this is the call path: dsa_slave_create -> netdev_upper_dev_link -> __netdev_upper_dev_link -> __netdev_adjacent_dev_insert -> dev_hold So a DSA switch with 3 interfaces will result in a usage count elevated by two, and netdev_wait_allrefs will wait until they have gone away. Other stacked interfaces, like VLAN, watch NETDEV_UNREGISTER events and delete themselves, but DSA cannot just vanish and go poof, at most it can unbind itself from the switch devices, but that must happen strictly earlier compared to when the DSA master unregisters its net_device, so reacting on the NETDEV_UNREGISTER event is way too late. It seems that it is a pretty established pattern to have a driver's ->shutdown hook redirect to its ->remove hook, so the same code is executed regardless of whether the driver is unbound from the device, or the system is just shutting down. As Florian puts it, it is quite a big hammer for bcmgenet to unregister its net_device during shutdown, but having a common code path with the driver unbind helps ensure it is well tested. So DSA, for better or for worse, has to live with that and engage in an arms race of implementing the ->shutdown hook too, from all individual drivers, and do something sane when paired with masters that unregister their net_device there. The only sane thing to do, of course, is to unlink from the master. However, complications arise really quickly. The pattern of redirecting ->shutdown to ->remove is not unique to bcmgenet or even to net_device drivers. In fact, SPI controllers do it too (see dspi_shutdown -> dspi_remove), and presumably, I2C controllers and MDIO controllers do it too (this is something I have not researched too deeply, but even if this is not the case today, it is certainly plausible to happen in the future, and must be taken into consideration). Since DSA switches might be SPI devices, I2C devices, MDIO devices, the insane implication is that for the exact same DSA switch device, we might have both ->shutdown and ->remove getting called. So we need to do something with that insane environment. The pattern I've come up with is "if this, then not that", so if either ->shutdown or ->remove gets called, we set the device's drvdata to NULL, and in the other hook, we check whether the drvdata is NULL and just do nothing. This is probably not necessary for platform devices, just for devices on buses, but I would really insist for consistency among drivers, because when code is copy-pasted, it is not always copy-pasted from the best sources. So depending on whether the DSA switch's ->remove or ->shutdown will get called first, we cannot really guarantee even for the same driver if rebooting will result in the same code path on all platforms. But nonetheless, we need to do something minimally reasonable on ->shutdown too to fix the bug. Of course, the ->remove will do more (a full teardown of the tree, with all data structures freed, and this is why the bug was not caught for so long). The new ->shutdown method is kept separate from dsa_unregister_switch not because we couldn't have unregistered the switch, but simply in the interest of doing something quick and to the point. The big question is: does the DSA switch's ->shutdown get called earlier than the DSA master's ->shutdown? If not, there is still a risk that we might still trigger the WARN_ON in unregister_netdevice that says we are attempting to unregister a net_device which has uppers. That's no good. Although the reference to the master net_device won't physically go away even if DSA's ->shutdown comes afterwards, remember we have a dev_hold on it. The answer to that question lies in this comment above device_link_add: * A side effect of the link creation is re-ordering of dpm_list and the * devices_kset list by moving the consumer device and all devices depending * on it to the ends of these lists (that does not happen to devices that have * not been registered when this function is called). so the fact that DSA uses device_link_add towards its master is not exactly for nothing. device_shutdown() walks devices_kset from the back, so this is our guarantee that DSA's shutdown happens before the master's shutdown. Fixes: 2f1e8ea726e9 ("net: dsa: link interfaces with the DSA master to get rid of lockdep warnings") Link: https://lore.kernel.org/netdev/20210909095324.12978-1-LinoSanfilippo@gmx.de/ Reported-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-19net: mdio: introduce a shutdown method to mdio device driversVladimir Oltean1-0/+11
MDIO-attached devices might have interrupts and other things that might need quiesced when we kexec into a new kernel. Things are even more creepy when those interrupt lines are shared, and in that case it is absolutely mandatory to disable all interrupt sources. Moreover, MDIO devices might be DSA switches, and DSA needs its own shutdown method to unlink from the DSA master, which is a new requirement that appeared after commit 2f1e8ea726e9 ("net: dsa: link interfaces with the DSA master to get rid of lockdep warnings"). So introduce a ->shutdown method in the MDIO device driver structure. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-18Merge tag 's390-5.15-3' of ↵Linus Torvalds3-4/+6
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Vasily Gorbik: - Fix potential out-of-range access during secure boot facility detection. - Fully validate the VMA before calling follow_pte() in pci code. - Remove arch specific WARN_DYNAMIC_STACK config option. - Fix zcrypto kernel doc comments. - Update defconfigs. * tag 's390-5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: remove WARN_DYNAMIC_STACK s390/ap: fix kernel doc comments s390: update defconfigs s390/sclp: fix Secure-IPL facility detection s390/pci_mmio: fully validate the VMA before calling follow_pte()
2021-09-18Merge tag 'devicetree-fixes-for-5.15-2' of ↵Linus Torvalds2-3/+5
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Revert fw_devlink tracking 'phy-handle' links. This broke at least a few platforms. A better solution is being worked on. - Add Samsung UFS binding which fell thru the cracks - Doc reference fixes from Mauro - Fix for restricted DMA error handling * tag 'devicetree-fixes-for-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: arm: Fix Toradex compatible typo of: restricted dma: Fix condition for rmem init dt-bindings: arm: mediatek: mmsys: update mediatek,mmsys.yaml reference dt-bindings: net: dsa: sja1105: update nxp,sja1105.yaml reference dt-bindings: ufs: Add bindings for Samsung ufs host Revert "of: property: fw_devlink: Add support for "phy-handle" property"
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-30 00:16:10 +0000