| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The size of struct pdu is 8 byte. The memory is allocated, initialized,
used and deallocated a few lines later.
It is more efficient to avoid the allocation/free dance and assign the
values directly to skb's data part instead of using memcpy() for it.
Avoid an allocation of struct pdu and use the resulting skb pointer
instead.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
[jwi: Fix-up the pdu_offset, adjust skb->len for the pushed length.
Reflow the commit msg.]
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The size of struct qllc is 2 byte. The memory for is allocated,
initialized, used and deallocated a few lines later.
It is more efficient to avoid the allocation/free dance and assign the
values directly to skb's data part instead of using memcpy() for it.
Avoid an allocation of struct qllc and use the resulting skb pointer
instead.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
[jwi: remove a newline, reflow the commit msg]
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The size of struct th_header is 8 byte and the size of struct th_sweep
is 16 byte. The memory for is allocated, initialized, used and
deallocated a few lines later.
It is more efficient to avoid the allocation/free dance and assign the
values directly to skb's data part instead of using memcpy() for it.
Avoid an allocation of struct th_sweep/th_header and use the resulting
skb pointer instead.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
[jwi: use skb_put_zero(), instead of skb_put() + memset to 0]
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This was added in commit ce973b141dfa ("[PATCH] Freescale QE UCC gigabit
ethernet driver") but doesn't appear to have been used. Remove it now.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20201130001010.28998-1-chris.packham@alliedtelesis.co.nz
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After adding support for QinQ, a.k.a 802.1ad protocol, there are a few
scenarios that should be vetoed.
The vetoes are motivated by various ASIC limitations.
For example, a port that is member in a 802.1ad bridge cannot have 802.1q
uppers as the port needs to be configured to treat 802.1q packets as
untagged packets.
Veto all those unsupported scenarios and return suitable messages.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
802.1ad, also known as QinQ is an extension to the 802.1q standard, which
is concerned with passing possibly 802.1q-tagged packets through another
VLAN-like tunnel. The format of 802.1ad tag is the same as 802.1q, except
it uses the EtherType of 0x88a8, unlike 802.1q's 0x8100.
Add support for 802.1ad protocol. Most of the configuration is the same
as 802.1q. The difference is that before a port joins an 802.1ad bridge it
needs to be configured to recognize 802.1ad packets as tagged and other
packets (e.g., 802.1q) as untagged.
VXLAN is not currently supported with 802.1ad bridge, so return an error
with an appropriate extack message.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The code in mlxsw_sp_bridge_8021q_port_{join, leave}() can be used also
for 802.1ad bridge.
Move the code to functions called
mlxsw_sp_bridge_vlan_aware_port_{join, leave}() and call them from
mlxsw_sp_bridge_8021q_port_{join, leave}() respectively to enable code
reuse.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, when pushing a PVID at ingress, mlxsw always uses 802.1q
EtherType.
Make this EtherType configurable by extending mlxsw_sp_port_pvid_set()
with an EtherType argument.
This is a preparation for QinQ support, that needs to push a PVID with
802.1ad EtherType.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
By default, the device considers both 802.1ad and 802.1q packets as tagged,
but this is not supported by the driver. It only supports VLAN and bridge
devices that use 802.1q protocol.
Instead, configure the device to only treat 802.1q packets as tagged
packets.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
et_vlan field is used to configure which EtherType is used when VLAN is
pushed at ingress (for untagged packets or for QinQ push mode).
It will be used to configure tagging with ether_type1 (i.e., 0x88A8) for
QinQ mode.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
SPVC configures the port to identify packets as untagged / single tagged /
double tagged packets based on the packet EtherTypes.
It will be used to classify 802.1q packets as untagged and 802.1ad packets
as tagged when received by ports member in a 802.1ad bridge.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Bellow HNAE3_DEVICE_VERSION_V3, MAC pause mode just support one
TC, when enabled multiple TCs, force enable PFC mode.
HNAE3_DEVICE_VERSION_V3 can support MAC pause mode on multiple
TCs, so when enable multiple TCs, just keep MAC pause mode,
and enable PFC mode just according to the user settings.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For the device whose version is above V3(include V3), the hardware
can do checksum offload for the non-tunnel udp packet, who has
a dest port as the IANA assigned. So add a check for devcie's verion
in hns3_tunnel_csum_bug().
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since TX hardware checksum and RX completion checksum have been
supported now, so add related information in hns3_dbg_bd_info().
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For the device who has the capability to handle udp tunnel
checksum segmentation, add support for it.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, device V1 and V2 do not support segmentation
offload for UDP based tunnel packet who needs outer UDP
checksum offload, so there is a workaround in the driver
to set the checksum of the outer UDP checksum as zero. This
is not what the user wants, so remove this feature for
device V1 and V2, add support for it later(when the device
has the ability to do that).
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For the device that supports TX hardware checksum, the hardware
can calculate the checksum from the start and fill the checksum
to the offset position, which reduces the operations of
calculating the type and header length of L3/L4. So add this
feature for the HNS3 ethernet driver.
The previous simple BD description is unsuitable, rename it as
HW TX CSUM.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In some cases (for example ip fragment), hardware will
calculate the checksum of whole packet in RX, and setup
the HNS3_RXD_L2_CSUM_B flag in the descriptor, so add
support to utilize this checksum.
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2020-11-30
Gustavo A. R. Silva's patch for the pcan_usb driver fixes fall-through warnings
for Clang.
The next 5 patches target the mcp251xfd driver and are by Ursula Maplehurst and
me. They optimizie the TEF and RX path by reducing number of SPI core requests
to set the UINC bit.
The remaining 8 patches target the m_can driver. The first 4 are various
cleanups for the SPI binding driver (tcan4x5x) by Sean Nyekjaer, Dan Murphy and
me. Followed by 4 cleanup patches by me for the m_can and m_can_platform
driver.
* tag 'linux-can-next-for-5.11-20201130' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: m_can: m_can_class_unregister(): move right after m_can_class_register()
can: m_can: m_can_plat_remove(): remove unneeded platform_set_drvdata()
can: m_can: remove not used variable struct m_can_classdev::freq
can: m_can: Kconfig: convert the into menu
can: tcan4x5x: tcan4x5x_can_probe(): remove probe failed error message
can: tcan4x5x: remove mram_start and reg_offset from struct tcan4x5x_priv
can: tcan4x5x: rename parse_config() function
can: tcan4x5x: tcan4x5x_clear_interrupts(): remove redundant return statement
can: mcp251xfd: tef-path: reduce number of SPI core requests to set UINC bit
can: mcp251xfd: move struct mcp251xfd_tef_ring definition
can: mcp251xfd: struct mcp251xfd_priv::tef to array of length 1
can: mcp25xxfd: rx-path: reduce number of SPI core requests to set UINC bit
can: mcp251xfd: mcp25xxfd_ring_alloc(): add define instead open coding the maximum number of RX objects
can: pcan_usb_core: fix fall-through warnings for Clang
====================
Link: https://lore.kernel.org/r/20201130141432.278219-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The macro use will already have a semicolon.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20201127165734.2694693-1-trix@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For XDP TX, even tough we start out with correctly aligned buffers, the
XDP program might change the data's alignment. For REDIRECT, we have no
control over the alignment either.
Create a new workaround for xdp_frame structures to verify the erratum
conditions and move the data to a fresh buffer if necessary. Create a new
xdp_frame for managing the new buffer and free the old one using the XDP
API.
Due to alignment constraints, all frames have a 256 byte headroom that
is offered fully to XDP under the erratum. If the XDP program uses all
of it, the data needs to be move to make room for the xdpf backpointer.
Disable the metadata support since the information can be lost.
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Explicitly point that the current workaround addresses skbs. This change is
in preparation for adding a workaround for XDP scenarios.
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After transmission, the frame is returned on confirmation queues for
cleanup. For this, store a backpointer to the xdp_frame in the private
reserved area at the start of the TX buffer.
No TX batching support is implemented at this time.
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use an xdp_frame structure for managing the frame. Store a backpointer to
the structure at the start of the buffer before enqueueing for cleanup
on TX confirmation. Reserve DPAA_TX_PRIV_DATA_SIZE bytes from the frame
size shared with the XDP program for this purpose. Use the XDP
API for freeing the buffer when it returns to the driver on the TX
confirmation path.
The frame queues are shared with the netstack. The DPAA driver is a LLTX
driver so no explicit locking is required on transmission.
This approach will be reused for XDP REDIRECT.
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement the ndo_change_mtu callback to prevent users from setting an
MTU that would permit processing of S/G frames. The maximum MTU size
is dependent on the buffer size.
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement the XDP_DROP and XDP_PASS actions.
Avoid draining and reconfiguring the buffer pool at each XDP
setup/teardown by increasing the frame headroom and reserving
XDP_PACKET_HEADROOM bytes from the start. Since we always reserve an
entire page per buffer, this change only impacts Jumbo frame scenarios
where the maximum linear frame size is reduced by 256 bytes. Multi
buffer Scatter/Gather frames are now used instead in these scenarios.
Allow XDP programs to access the entire buffer.
The data in the received frame's headroom can be overwritten by the XDP
program. Extract the relevant fields from the headroom while they are
still available, before running the XDP program.
Since the headroom might be resized before the frame is passed up to the
stack, remove the check for a fixed headroom value when building an skb.
Allow the meta data to be updated and pass the information up the stack.
Scatter/Gather frames are dropped when XDP is enabled.
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We maintain an skb backpointer in the software annotations area of Tx
frames. Introduce a structure for explicit handling.
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch moves the function m_can_class_unregister() directly after the
m_can_class_register() function.
Link: https://lore.kernel.org/r/20201130133713.269256-7-mkl@pengutronix.de
Reviewed-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
There's no need to unset the drvdata on remove, so remove the unneeded call to
platform_set_drvdata() in m_can_plat_remove().
Link: https://lore.kernel.org/r/20201130133713.269256-6-mkl@pengutronix.de
Reviewed-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
This patch removes the unused variable freq from the struct m_can_classdev.
Link: https://lore.kernel.org/r/20201130133713.269256-5-mkl@pengutronix.de
Reviewed-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Since there is more than one base driver for the m_can core, let's
convert this into a menu.
Link: https://lore.kernel.org/r/20201130133713.269256-4-mkl@pengutronix.de
Reviewed-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The driver core already emits a probe failed error message, so remove this one
from the driver.
Link: https://lore.kernel.org/r/20201130133713.269256-3-mkl@pengutronix.de
Reviewed-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Both struct tcan4x5x_priv::mram_start and struct tcan4x5x_priv::reg_offset are
only assigned once with a constant and then always used read-only. This patch
changes the driver to use the constant directly instead.
Link: https://lore.kernel.org/r/20201130133713.269256-2-mkl@pengutronix.de
Reviewed-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Rename the tcan4x5x_parse_config() function to tcan4x5x_get_gpios() since the
function retrieves the gpio configurations from the firmware.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Link: http://lore.kernel.org/r/20200226140358.30017-1-dmurphy@ti.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
This patch removes a redundant return at the end of
tcan4x5x_clear_interrupts().
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Link: http://lore.kernel.org/r/20191211141635.322577-1-sean@geanix.com
Reported-by: Daniels Umanovskis <daniels@umanovskis.se>
Acked-by: Dan Murphy <dmurphy@ti.com>
Fixes: 5443c226ba91 ("can: tcan4x5x: Add tcan4x5x driver to the kernel")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Reduce the number of separate SPI core requests when setting the UINC bit in
the TEF FIFO, and instead batch them up into a single SPI core request.
Link: https://lore.kernel.org/r/20201126132144.351154-6-mkl@pengutronix.de
Tested-by: Thomas Kopp <thomas.kopp@microchip.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
This patch moves the struct mcp251xfd_tef_ring upwards, so that the union
mcp251xfd_write_reg_buf and struct spi_transfer can be made members of it.
Link: https://lore.kernel.org/r/20201126132144.351154-5-mkl@pengutronix.de
Tested-by: Thomas Kopp <thomas.kopp@microchip.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
This patch converts the struct mcp251xfd_tef_ring member within the struct
mcp251xfd_priv into an array of length one. This way all rings (tef, tx and rx)
can be accessed in the same way.
Link: https://lore.kernel.org/r/20201126132144.351154-4-mkl@pengutronix.de
Tested-by: Thomas Kopp <thomas.kopp@microchip.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Reduce the number of separate SPI core requests when setting the UINC bit in
the RX FIFO, and instead batch them up into a single SPI core request.
Link: https://github.com/marckleinebudde/linux/issues/4
Link: https://lore.kernel.org/r/20201126132144.351154-3-mkl@pengutronix.de
Tested-by: Thomas Kopp <thomas.kopp@microchip.com>
Signed-off-by: Ursula Maplehurst <ursula@kangatronix.co.uk>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
maximum number of RX objects
This patch add a define for the maximum number of RX objects instead of open
coding it.
Link: https://lore.kernel.org/r/20201126132144.351154-2-mkl@pengutronix.de
Tested-by: Thomas Kopp <thomas.kopp@microchip.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by
moving the "default" to the end of the "switch" statement and explicitly adding
a break statement instead of letting the code fall through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Reported-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: http://lore.kernel.org/r/aab7cf16bf43cc7c3e9c9930d2dae850c1d07a3c.1605896059.git.gustavoars@kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
[mkl: move default to end]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The offsets for almost all GSI registers we use have different
offsets starting at IPA version 4.5. Only two registers remain
in their original location.
In a way though, the new register locations are not *that*
different. The entire group of affected registers has simply
been shifted down in memory by a fixed amount (0xd000). So for
example, the channel context 0 register that has a base offset of
0x0001c000 for "older" hardware now has a base offset of 0x0000f000.
This patch aims to add support for IPA v4.5 registers at their new
offets in a way that minimizes the amount of code that needs to
change. It is not ideal, but it avoids the need to maintain
a nearly complete set of additional register offset definitions.
The approach takes advantage of the fact that when accessing GSI
registers we do not access any of memory at lower end of the "gsi"
memory range (with two exceptions already noted). In particular,
we do not access anything within the bottom 0xd000 bytes of the
GSI memory range.
For IPA version 4.5, after we map the GSI memory, we adjust the
virtual memory pointer downward by the fixed amount (0xd000).
That way, register accesses using the offsets defined by the
existing GSI_REG_*() macros will resolve to the proper locations
for IPA version 4.5.
The two registers *not* affected by this offset are accessed only
in gsi_irq_setup(). There, for IPA version 4.5, we undo the general
register adjustment by adding the fixed amount back to the virtual
address to access these registers.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Very few GSI register definitions change for IPA v4.5, however
as a group their position in memory shifts a constant amount
(handled by the next commit).
Add definitions and update comments to the set of GSI registers to
support changes that come with IPA v4.5.
Update the logic in gsi_channel_program() to accommodate the new
(expanded) PREFETCH_MODE field in the CH_C_QOS register.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update the IPA code to make use of the updated IPA v4.5 register
definitions. Generally what this patch does is, if IPA v4.5
hardware is in use:
- Ensure new registers or fields in IPA v4.5 are updated where
required
- Ensure registers or fields not supported in IPA v4.5 are not
examined when read, or are set to 0 when written
It does this while preserving the existing functionality for IPA
versions lower than v4.5.
The values to program for QSB_MAX_READS and QSB_MAX_WRITES and the
source and destination resource counts are updated to be correct for
all versions through v4.5 as well.
Note that IPA_RESOURCE_GROUP_SRC_MAX and IPA_RESOURCE_GROUP_DST_MAX
already reflect that 5 is an acceptable number of resources (which
IPA v4.5 implements).
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
IPA v4.5 adds a few fields to the endpoint header and extended
header configuration registers that represent new high-order bits
for certain offsets and sizes. Add code to incorporate these upper
bits into the registers for IPA v4.5.
This includes creating ipa_header_size_encoded(), which handles
encoding the metadata offset field for use in the ENDP_INIT_HDR
register in a way appropriate for the hardware version. This and
ipa_metadata_offset_encoded() ensure the mask argument passed to
u32_encode_bits() is constant.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update "ipa_reg.h" so that register definitions support IPA hardware
version 4.5, in addition to versions 3.5.1 through v4.2. Most of
the register definitions are the same, but in some cases fields are
added, changed, or eliminated.
Updates for a few IPA v4.5 registers are more complex, and adding
those definition will be deferred to separate patches. This patch
only updates the register offset and field definitions, and adds
informational comments.
The only code change avoids accessing the backward compatibility
register for IPA version 4.5 in ipa_hardware_config(). Other IPA
v4.5-specific code changes will come later.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Starting with IPA v4.2 there is a GSI channel option to use an
"escape buffer" instead of prefetch buffers. This should be used
for all channels *except* the AP command TX channel. The logic
that implements this has it backwards; fix this bug.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Trivial conflict in CAN, keep the net-next + the byteswap wrapper.
Conflicts:
drivers/net/can/usb/gs_usb.c
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After migration to the shared interrupt support, the KSZ8031 PHY with
enabled interrupt support was not able to notify about link status
change.
Fixes: 59ca4e58b917 ("net: phy: micrel: implement generic .handle_interrupt() callback")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20201127123621.31234-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The device supports an operation that allows the driver to issue one
request to update the adjacency index for all the routes in a given
virtual router (VR) from old index and size to new ones. This is useful
in case the configuration of a certain nexthop group is updated and its
adjacency index changes.
Currently, the driver does not use this operation in an efficient
manner. It iterates over all the routes using the nexthop group and
issues an update request for the VR if it is not the same as the
previous VR.
Instead, use the VR tracking added in the previous patch to update the
adjacency index once for each VR currently using the nexthop group.
Example:
8k IPv6 routes were added in an alternating manner to two VRFs. All the
routes are using the same nexthop object ('nhid 1').
Before:
# perf stat -e devlink:devlink_hwmsg --filter='incoming==0' -- ip nexthop replace id 1 via 2001:db8:1::2 dev swp3
Performance counter stats for 'ip nexthop replace id 1 via 2001:db8:1::2 dev swp3':
16,385 devlink:devlink_hwmsg
4.255933213 seconds time elapsed
0.000000000 seconds user
0.666923000 seconds sys
Number of EMAD transactions corresponds to number of routes using the
nexthop group.
After:
# perf stat -e devlink:devlink_hwmsg --filter='incoming==0' -- ip nexthop replace id 1 via 2001:db8:1::2 dev swp3
Performance counter stats for 'ip nexthop replace id 1 via 2001:db8:1::2 dev swp3':
3 devlink:devlink_hwmsg
0.077655094 seconds time elapsed
0.000000000 seconds user
0.076698000 seconds sys
Number of EMAD transactions corresponds to number of VRFs / VRs.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
