summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2016-09-09efi: Add efi_memmap_install() for installing new EFI memory mapsMatt Fleming2-7/+26
While efi_memmap_init_{early,late}() exist for architecture code to install memory maps from firmware data and for the virtual memory regions respectively, drivers don't care which stage of the boot we're at and just want to swap the existing memmap for a modified one. efi_memmap_install() abstracts the details of how the new memory map should be mapped and the existing one unmapped. Tested-by: Dave Young <dyoung@redhat.com> [kexec/kdump] Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> [arm] Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Peter Jones <pjones@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
2016-09-09efi: Split out EFI memory map functions into new fileMatt Fleming4-267/+274
Also move the functions from the EFI fake mem driver since future patches will require access to the memmap insertion code even if CONFIG_EFI_FAKE_MEM isn't enabled. This will be useful when we need to build custom EFI memory maps to allow drivers to mark regions as reserved. Tested-by: Dave Young <dyoung@redhat.com> [kexec/kdump] Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> [arm] Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Peter Jones <pjones@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
2016-09-09efi/fake_mem: Refactor main two code chunks into functionsMatt Fleming1-95/+134
There is a whole load of generic EFI memory map code inside of the fake_mem driver which is better suited to being grouped with the rest of the generic EFI code for manipulating EFI memory maps. In preparation for that, this patch refactors the core code, so that it's possible to move entire functions later. Tested-by: Dave Young <dyoung@redhat.com> [kexec/kdump] Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> [arm] Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Peter Jones <pjones@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
2016-09-09efi: Add efi_memmap_init_late() for permanent EFI memmapMatt Fleming2-43/+96
Drivers need a way to access the EFI memory map at runtime. ARM and arm64 currently provide this by remapping the EFI memory map into the vmalloc space before setting up the EFI virtual mappings. x86 does not provide this functionality which has resulted in the code in efi_mem_desc_lookup() where it will manually map individual EFI memmap entries if the memmap has already been torn down on x86, /* * If a driver calls this after efi_free_boot_services, * ->map will be NULL, and the target may also not be mapped. * So just always get our own virtual map on the CPU. * */ md = early_memremap(p, sizeof (*md)); There isn't a good reason for not providing a permanent EFI memory map for runtime queries, especially since the EFI regions are not mapped into the standard kernel page tables. Tested-by: Dave Young <dyoung@redhat.com> [kexec/kdump] Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> [arm] Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Peter Jones <pjones@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
2016-09-09efi: Refactor efi_memmap_init_early() into arch-neutral codeMatt Fleming4-16/+64
Every EFI architecture apart from ia64 needs to setup the EFI memory map at efi.memmap, and the code for doing that is essentially the same across all implementations. Therefore, it makes sense to factor this out into the common code under drivers/firmware/efi/. The only slight variation is the data structure out of which we pull the initial memory map information, such as physical address, memory descriptor size and version, etc. We can address this by passing a generic data structure (struct efi_memory_map_data) as the argument to efi_memmap_init_early() which contains the minimum info required for initialising the memory map. In the process, this patch also fixes a few undesirable implementation differences: - ARM and arm64 were failing to clear the EFI_MEMMAP bit when unmapping the early EFI memory map. EFI_MEMMAP indicates whether the EFI memory map is mapped (not the regions contained within) and can be traversed. It's more correct to set the bit as soon as we memremap() the passed in EFI memmap. - Rename efi_unmmap_memmap() to efi_memmap_unmap() to adhere to the regular naming scheme. This patch also uses a read-write mapping for the memory map instead of the read-only mapping currently used on ARM and arm64. x86 needs the ability to update the memory map in-place when assigning virtual addresses to regions (efi_map_region()) and tagging regions when reserving boot services (efi_reserve_boot_services()). There's no way for the generic fake_mem code to know which mapping to use without introducing some arch-specific constant/hook, so just use read-write since read-only is of dubious value for the EFI memory map. Tested-by: Dave Young <dyoung@redhat.com> [kexec/kdump] Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> [arm] Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Leif Lindholm <leif.lindholm@linaro.org> Cc: Peter Jones <pjones@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
2016-09-09x86/efi: Test for EFI_MEMMAP functionality when iterating EFI memmapMatt Fleming1-1/+1
Both efi_find_mirror() and efi_fake_memmap() really want to know whether the EFI memory map is available, not just whether the machine was booted using EFI. efi_fake_memmap() even has a check for EFI_MEMMAP at the start of the function. Since we've already got other code that has this dependency, merge everything under one if() conditional, and remove the now superfluous check from efi_fake_memmap(). Tested-by: Dave Young <dyoung@redhat.com> [kexec/kdump] Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> [arm] Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
2016-09-04Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Thomas Gleixner: "Two fixlet from the timers departement: - A fix for scheduler stalls in the tick idle code affecting NOHZ_FULL kernels - A trivial compile fix" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tick/nohz: Fix softlockup on scheduler stalls in kvm guest clocksource/drivers/atmel-pit: Fix compilation error
2016-09-03Merge tag 'dm-4.8-fixes-4' of ↵Linus Torvalds3-7/+14
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - a stable fix in both DM crypt and DM log-writes for too large bios (as generated by bcache) - two other stable fixes for DM log-writes - a stable fix for a DM crypt bug that could result in freeing pointers from uninitialized memory in the tfm allocation error path - a DM bufio cleanup to discontinue using create_singlethread_workqueue() * tag 'dm-4.8-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm bufio: remove use of deprecated create_singlethread_workqueue() dm crypt: fix free of bad values after tfm allocation failure dm crypt: fix error with too large bios dm log writes: fix check of kthread_run() return value dm log writes: fix bug with too large bios dm log writes: move IO accounting earlier to fix error path
2016-09-03Merge tag 'arm64-fixes' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: "arm64 and arm/perf fixes: - arm64 fix: debug exception unmasking on the CPU resume path - ARM PMU fixes: memory leak on error path and NULL pointer dereference" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: kernel: Fix unmasked debug exceptions when restoring mdscr_el1 drivers/perf: arm_pmu: Fix NULL pointer dereference during probe drivers/perf: arm_pmu: Fix leak in error path
2016-09-03Merge tag 'char-misc-4.8-rc5' of ↵Linus Torvalds10-279/+25
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are a number of small driver fixes for 4.8-rc5. The largest thing here is deleting an obsolete driver, drivers/misc/bh1780gli.c, as the functionality of it was replaced by an iio driver a while ago. The other fixes are things that have been reported, or reverts of broken stuff (the binder change). All of these changes have been in linux-next for a while with no reported issues" * tag 'char-misc-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: thunderbolt: Don't declare Falcon Ridge unsupported thunderbolt: Add support for INTEL_FALCON_RIDGE_2C controller. thunderbolt: Fix resume quirk for Falcon Ridge 4C. lkdtm: Mark lkdtm_rodata_do_nothing() notrace mei: me: disable driver on SPT SPS firmware Revert "android: binder: fix dangling pointer comparison" drivers/iio/light/Kconfig: SENSORS_BH1780 cleanup android: binder: fix dangling pointer comparison misc: delete bh1780 driver
2016-09-03Merge tag 'staging-4.8-rc5' of ↵Linus Torvalds28-114/+174
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging/IIO driver fixes from Greg KH: "Here are a number of small fixes for staging and IIO drivers that resolve reported problems. Full details are in the shortlog. All of these have been in linux-next with no reported issues" * tag 'staging-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (35 commits) arm: dts: rockchip: add reset node for the exist saradc SoCs arm64: dts: rockchip: add reset saradc node for rk3368 SoCs iio: adc: rockchip_saradc: reset saradc controller before programming it iio: accel: kxsd9: Fix raw read return iio: adc: ti_am335x_adc: Increase timeout value waiting for ADC sample iio: adc: ti_am335x_adc: Protect FIFO1 from concurrent access include/linux: fix excess fence.h kernel-doc notation staging: wilc1000: correctly check if associatedsta has not been found staging: wilc1000: NULL dereference on error staging: wilc1000: txq_event: Fix coding error MAINTAINERS: Add file patterns for ion device tree bindings MAINTAINERS: Update maintainer entry for wilc1000 iio: chemical: atlas-ph-sensor: fix typo in val assignment iio: fix sched WARNING "do not call blocking ops when !TASK_RUNNING" staging: comedi: ni_mio_common: fix AO inttrig backwards compatibility staging: comedi: dt2811: fix a precedence bug staging: comedi: adv_pci1760: Do not return EINVAL for CMDF_ROUND_DOWN. staging: comedi: ni_mio_common: fix wrong insn_write handler staging: comedi: comedi_test: fix timer race conditions staging: comedi: daqboard2000: bug fix board type matching code ...
2016-09-03Merge tag 'tty-4.8-rc5' of ↵Linus Torvalds8-70/+159
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull serial driver fixes from Greg KH: "Here are some small serial driver fixes for 4.8-rc5. One fixes an oft-reported build issue with the fintek driver, another reverts a patch that was causing problems, one fixes a crash, and some new device ids were added. All of these have been in linux-next for a while" * tag 'tty-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: 8250: added acces i/o products quad and octal serial cards serial: 8250_mid: fix divide error bug if baud rate is 0 Revert "tty/serial/8250: use mctrl_gpio helpers" 8250/fintek: rename IRQ_MODE macro
2016-09-03Merge tag 'usb-4.8-rc5' of ↵Linus Torvalds22-57/+141
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY fixes from Greg KH: "Here are some USB and PHY driver fixes for 4.8-rc5 Nothing major, lots of little fixes for reported bugs, and a build fix for a missing .h file that the phy drivers needed. All of these have been in linux-next for a while with no reported issues" * tag 'usb-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (24 commits) usb: musb: Fix locking errors for host only mode usb: dwc3: gadget: always decrement by 1 usb: dwc3: debug: fix ep name on trace output usb: gadget: udc: core: don't starve DMA resources USB: serial: option: add WeTelecom 0x6802 and 0x6803 products USB: avoid left shift by -1 USB: fix typo in wMaxPacketSize validation usb: gadget: Add the gserial port checking in gs_start_tx() usb: dwc3: gadget: don't rely on jiffies while holding spinlock usb: gadget: fsl_qe_udc: signedness bug in qe_get_frame() usb: gadget: function: f_rndis: socket buffer may be NULL usb: gadget: function: f_eem: socket buffer may be NULL usb: renesas_usbhs: gadget: fix return value check in usbhs_mod_gadget_probe() usb: dwc2: Add reset control to dwc2 usb: dwc3: core: allow device to runtime_suspend several times usb: dwc3: pci: runtime_resume child device USB: serial: option: add WeTelecom WM-D200 usb: chipidea: udc: don't touch DP when controller is in host mode USB: serial: mos7840: fix non-atomic allocation in write path USB: serial: mos7720: fix non-atomic allocation in write path ...
2016-09-02Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds7-33/+53
Pull block fixes from Jens Axboe: "A collection of fixes for the nvme over fabrics code" * 'for-linus' of git://git.kernel.dk/linux-block: nvme-rdma: Get rid of redundant defines nvme-rdma: Get rid of duplicate variable nvme: fabrics drivers don't need the nvme-pci driver nvme-fabrics: get a reference when reusing a nvme_host structure nvme-fabrics: change NQN UUID to big-endian format nvme-loop: set sqsize to 0-based value, per spec nvme-rdma: fix sqsize/hsqsize per spec fabrics: define admin sqsize min default, per spec nvmet-rdma: +1 to *queue_size from hsqsize/hrqsize nvmet-rdma: Fix use after free nvme-rdma: initialize ret to zero to avoid returning garbage
2016-09-02Merge branch 'for-linus' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull TPM bugfix from James Morris. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: tpm: invalid self test error message
2016-09-03tpm: invalid self test error messageJarkko Sakkinen1-2/+1
The driver emits invalid self test error message even though the init succeeds. Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Fixes: cae8b441fc20 ("tpm: Factor out common startup code") Reviewed-by: James Morris <james.l.morris@oracle.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2016-09-02Merge tag 'acpi-4.8-rc5' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes ffrom Rafael Wysocki: "Two stable-candidate fixes for the ACPI early device probing code added during the 4.4 cycle, one fixing a typo in a stub macro used when CONFIG_ACPI is unset and one that prevents sleeping functions from being called under a spinlock (Lorenzo Pieralisi)" * tag 'acpi-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / drivers: replace acpi_probe_lock spinlock with mutex ACPI / drivers: fix typo in ACPI_DECLARE_PROBE_ENTRY macro
2016-09-02Merge tag 'pm-4.8-rc5' of ↵Linus Torvalds2-5/+7
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "This includes a stable-candidate cpufreq-dt driver problem fix and annotations of tracepoints in the runtime PM framework. Specifics: - Fix the definition of the cpufreq-dt driver's machines table introduced during the 4.7 cycle that should be NULL-terminated, but the termination entry is missing from it (Wei Yongjun). - Annotate tracepoints in the runtime PM framework's core so as to allow the functions containing them to be called from the idle code path without causing RCU to complain about illegal usage (Paul McKenney)" * tag 'pm-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / runtime: Add _rcuidle suffix to allow rpm_idle() use from idle PM / runtime: Add _rcuidle suffix to allow rpm_resume() to be called from idle cpufreq: dt: Add terminate entry for of_device_id tables
2016-09-02Merge branches 'pm-cpufreq-fixes' and 'pm-core-fixes'Rafael J. Wysocki1-5/+5
* pm-cpufreq-fixes: cpufreq: dt: Add terminate entry for of_device_id tables * pm-core-fixes: PM / runtime: Add _rcuidle suffix to allow rpm_idle() use from idle PM / runtime: Add _rcuidle suffix to allow rpm_resume() to be called from idle
2016-09-02ACPI / drivers: replace acpi_probe_lock spinlock with mutexLorenzo Pieralisi1-3/+3
Commit e647b532275b ("ACPI: Add early device probing infrastructure") introduced code that allows inserting driver specific struct acpi_probe_entry probe entries into ACPI linker sections (one per-subsystem, eg irqchip, clocksource) that are then walked to retrieve the data and function hooks required to probe the respective kernel components. Probing for all entries in a section is triggered through the __acpi_probe_device_table() function, that in turn, according to the table ID a given probe entry reports parses the table with the function retrieved from the respective section structures (ie struct acpi_probe_entry). Owing to the current ACPI table parsing implementation, the __acpi_probe_device_table() function has to share global variables with the acpi_match_madt() function, so in order to guarantee mutual exclusion locking is required between the two functions. Current kernel code implements the locking through the acpi_probe_lock spinlock; this has the side effect of requiring all code called within the lock (ie struct acpi_probe_entry.probe_{table/subtbl} hooks) not to sleep. However, kernel subsystems that make use of the early probing infrastructure are relying on kernel APIs that may sleep (eg irq_domain_alloc_fwnode(), among others) in the function calls pointed at by struct acpi_probe_entry.{probe_table/subtbl} entries (eg gic_v2_acpi_init()), which is a bug. Since __acpi_probe_device_table() is called from context that is allowed to sleep the acpi_probe_lock spinlock can be replaced with a mutex; this fixes the issue whilst still guaranteeing mutual exclusion. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Fixes: e647b532275b (ACPI: Add early device probing infrastructure) Cc: 4.4+ <stable@vger.kernel.org> # 4.4+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-02drivers/perf: arm_pmu: Fix NULL pointer dereference during probeStefan Wahren1-1/+1
Patch 7f1d642fbb5c ("drivers/perf: arm-pmu: Fix handling of SPI lacking interrupt-affinity property") unintended also fixes perf_event support for bcm2835 which doesn't have PMU interrupts. Unfortunately this change introduce a NULL pointer dereference on bcm2835, because irq_is_percpu always expected to be called with a valid IRQ. So fix this regression by validating the IRQ before. Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Fixes: 7f1d642fbb5c ("drivers/perf: arm-pmu: Fix handling of SPI lacking "interrupt-affinity" property") Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-09-02drivers/perf: arm_pmu: Fix leak in error pathStefan Wahren1-0/+1
In case of a IRQ type mismatch in of_pmu_irq_cfg() the device node for interrupt affinity isn't freed. So fix this issue by calling of_node_put(). Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Fixes: fa8ad7889d83 ("arm: perf: factor arm_pmu core out to drivers") Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-09-02Merge tag 'dmaengine-fix-4.8-rc5' of ↵Linus Torvalds5-17/+22
git://git.infradead.org/users/vkoul/slave-dma Pull dmaengine fixes from Vinod Koul: "The fixes this time are all in drivers: - possible NULL dereference in img-mdc - correct device identity for free_irq in at_xdmac - missing of_node_put() in fsl probe - fix debug log and hotchain corner case for pxa-dma - fix checking hardware bits in isr in usb dmac" * tag 'dmaengine-fix-4.8-rc5' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: img-mdc: fix a possible NULL dereference dmaengine: at_xdmac: fix to pass correct device identity to free_irq() dmaengine: fsl_raid: add missing of_node_put() in fsl_re_probe() dmaengine: pxa_dma: fix debug message dmaengine: pxa_dma: fix hotchain corner case dmaengine: usb-dmac: check CHCR.DE bit in usb_dmac_isr_channel()
2016-09-02Merge tag 'drm-fixes-for-4.8-rc5' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds14-31/+133
Pull drm fixes from Dave Airlie: "Contains fixes for imx, amdgpu, vc4, msm and one nouveau ACPI fix" * tag 'drm-fixes-for-4.8-rc5' of git://people.freedesktop.org/~airlied/linux: drm/amdgpu: record error code when ring test failed drm/amd/amdgpu: compute ring test fail during S4 on CI drm/amd/amdgpu: sdma resume fail during S4 on CI drm/nouveau/acpi: use DSM if bridge does not support D3cold drm/imx: fix crtc vblank state regression drm/imx: Add active plane reconfiguration support drm/msm: protect against faults from copy_from_user() in submit ioctl drm/msm: fix use of copy_from_user() while holding spinlock drm/vc4: Fix oops when userspace hands in a bad BO. drm/vc4: Fix overflow mem unreferencing when the binner runs dry. drm/vc4: Free hang state before destroying BO cache. drm/vc4: Fix handling of a pm_runtime_get_sync() success case. drm/vc4: Use drm_malloc_ab to fix large rendering jobs. drm/vc4: Use drm_free_large() on handles to match its allocation.
2016-09-02Merge tag 'drm-vc4-fixes-2016-08-29' of https://github.com/anholt/linux into ↵drm-fixes-for-4.8-rc5Dave Airlie4-13/+24
drm-fixes This pull request brings in fixes for VC4 3D in 4.8, most of which are covered by testcases. * tag 'drm-vc4-fixes-2016-08-29' of https://github.com/anholt/linux: drm/vc4: Fix oops when userspace hands in a bad BO. drm/vc4: Fix overflow mem unreferencing when the binner runs dry. drm/vc4: Free hang state before destroying BO cache. drm/vc4: Fix handling of a pm_runtime_get_sync() success case. drm/vc4: Use drm_malloc_ab to fix large rendering jobs. drm/vc4: Use drm_free_large() on handles to match its allocation.
2016-09-02Merge tag 'imx-drm-fixes-2016-08-30' of ↵Dave Airlie3-8/+43
git://git.pengutronix.de/git/pza/linux into drm-fixes imx-drm atomic modeset regression fixes - add active plane reconfiguration support - add back crtc vblank state reporting * tag 'imx-drm-fixes-2016-08-30' of git://git.pengutronix.de/git/pza/linux: drm/imx: fix crtc vblank state regression drm/imx: Add active plane reconfiguration support
2016-09-01Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds4-12/+14
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "A collection of small fixes for various SoC vendor clk drivers" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: rockchip: mark aclk_emmc_noc as a critical clock on rk3399 clk: tegra: remove TEGRA_PLL_USE_LOCK for PLLD/PLLD2 clk: rockchip: fix incorrect GATE bits for {c, g}pll_aclk_perihp_src on rk3399 clk: rockchip: fix incorrect aclk_emmc source gate bits on rk3399 clk: renesas: r8a7795: Fix SD clocks clk: rockchip: fix rk3399 aclk_vio gate bit clk: sunxi-ng: Fix inverted test condition in ccu_helper_wait_for_lock
2016-09-01rapidio/tsi721: fix incorrect detection of address translation conditionAlexandre Bounine1-1/+1
Fix incorrect condition to identify involvment of a address translation mechanism. This bug results in NULL pointer kernel crash dump in cases when mapping of inbound RapidIO address range is requested within existing aprture. Link: http://lkml.kernel.org/r/20160901173144.2983-1-alexandre.bounine@idt.com Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: Barry Wood <barry.wood@idt.com> Cc: <stable@vger.kernel.org> [4.6+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-01drivers/scsi/wd719x.c: remove last declaration using DEFINE_PCI_DEVICE_TABLEJoe Perches1-1/+1
Convert it to the preferred const struct pci_device_id instead. Link: http://lkml.kernel.org/r/95c5e4100c3cd4eda643624f5b70e8d7abceb86c.1472660229.git.joe@perches.com Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-01Merge branch 'msm-fixes-4.8' of git://people.freedesktop.org/~robclark/linux ↵Dave Airlie3-5/+40
into drm-fixes copy from user fixes. * 'msm-fixes-4.8' of git://people.freedesktop.org/~robclark/linux: drm/msm: protect against faults from copy_from_user() in submit ioctl drm/msm: fix use of copy_from_user() while holding spinlock
2016-08-31drm/amdgpu: record error code when ring test failedChunming Zhou1-2/+3
Otherwise we may miss errors. Signed-off-by: Chunming Zhou <David1.Zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-08-31drm/amd/amdgpu: compute ring test fail during S4 on CIjimqu1-3/+9
unhalt Instrction Fetch Unit after all rings are inited. Signed-off-by: JimQu <Jim.Qu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-08-31drm/amd/amdgpu: sdma resume fail during S4 on CIjimqu1-0/+3
SDMA could be fail in the thaw() and restore() processes, do software reset if each SDMA engine is busy. Signed-off-by: JimQu <Jim.Qu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2016-08-31Merge branch 'linus' of ↵Linus Torvalds3-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "This fixes the following issues: - Kconfig problem that prevented mxc-rnga from being enabled - bogus key sizes in qat aes-xts - buggy aes-xts code in vmx" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: vmx - fix null dereference in p8_aes_xts_crypt crypto: qat - fix aes-xts key sizes hwrng: mxc-rnga - Fix Kconfig dependency
2016-08-31serial: 8250: added acces i/o products quad and octal serial cardsJimi Damon1-0/+139
Added devices ids for acces i/o products quad and octal serial cards that make use of existing Pericom PI7C9X7954 and PI7C9X7958 configurations . Signed-off-by: Jimi Damon <jdamon@accesio.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31serial: 8250_mid: fix divide error bug if baud rate is 0Andy Shevchenko1-0/+3
Since the commit c1a67b48f6a5 ("serial: 8250_pci: replace switch-case by formula for Intel MID"), the 8250 driver crashes in the byt_set_termios() function with a divide error. This is caused by the fact that a baud rate of 0 (B0) is not handled properly. Fix it by falling back to B9600 in this case. Reported-by: "Mendez Salinas, Fernando" <fernando.mendez.salinas@intel.com> Fixes: c1a67b48f6a5 ("serial: 8250_pci: replace switch-case by formula for Intel MID") Cc: stable@vger.kernel.org Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31Revert "tty/serial/8250: use mctrl_gpio helpers"Andy Shevchenko5-68/+15
Serial console is broken in v4.8-rcX. Mika and I independently bisected down to commit 4ef03d328769 ("tty/serial/8250: use mctrl_gpio helpers"). Since neither author nor anyone else didn't propose a solution we better revert it for now. This reverts commit 4ef03d328769eddbfeca1f1c958fdb181a69c341. Link: https://lkml.kernel.org/r/20160809130229.GN1729@lahna.fi.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31thunderbolt: Don't declare Falcon Ridge unsupportedLukas Wunner1-1/+3
Falcon Ridge 4C has been supported by the driver from the beginning, Falcon Ridge 2C support was just added. Don't irritate users with a warning declaring the opposite. Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31thunderbolt: Add support for INTEL_FALCON_RIDGE_2C controller.Xavier Gnata2-0/+10
From: Xavier Gnata <xavier.gnata@gmail.com> Add support to INTEL_FALCON_RIDGE_2C controller and corresponding quirk to support suspend/resume. Tested against 4.7 master on a MacBook Air 11" 2015. Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Reviewed-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31thunderbolt: Fix resume quirk for Falcon Ridge 4C.Andreas Noever1-2/+1
The quirk 'quirk_apple_wait_for_thunderbolt' did not fire on Falcon Ridge 4C controllers with subdevice/subvendor set to zero. This lead to lost pci devices on system resume. Older thunderbolt controllers (pre Falcon Ridge) used the same device id for bridges and for the controller. On Apple hardware the subvendor- & subdevice-ids were set for the controller, but not for bridges. So that is what was used to differentiate between the two. Starting with Falcon Ridge bridges and controllers received different device ids. Additionally on some MacBookPro models (but not all) the subvendor/subdevice was zeroed. Starting with a42fb351c (thunderbolt: Allow loading of module on recent Apple MacBooks with thunderbolt 2 controller) the thunderbolt driver binds to all Falcon Ridge 4C controllers (irregardless of subvendor/subdevice). The corresponding quirk was not updated. This commit changes the quirk to check the device class instead of its subvendor-/subdeviceids. This works for all generations of Thunderbolt controllers. Signed-off-by: Andreas Noever <andreas.noever@gmail.com> Reviewed-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31lkdtm: Mark lkdtm_rodata_do_nothing() notraceMichael Ellerman1-1/+1
lkdtm_rodata_do_nothing() is an empty function which is generated in order to test the non-executability of rodata. Currently if function tracing is enabled then an mcount callsite will be generated for lkdtm_rodata_do_nothing(), and it will appear in the list of available functions for function tracing (available_filter_functions). Given it's purpose purely as a test function, it seems preferable for lkdtm_rodata_do_nothing() to be marked notrace, so it doesn't appear as traceable. This also avoids triggering a linker bug on powerpc: https://sourceware.org/bugzilla/show_bug.cgi?id=20428 When the linker sees code that needs to generate a call stub, eg. a branch to mcount(), it assumes the section is executable and dereferences a NULL pointer leading to a linker segfault. Marking lkdtm_rodata_do_nothing() notrace avoids triggering the bug because the function contains no other function calls. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31drm/nouveau/acpi: use DSM if bridge does not support D3coldPeter Wu1-0/+11
Even if PR3 support is available on the bridge, it will not be used if the PCI layer considers it unavailable (i.e. on all laptops from 2013 and 2014). Ensure that this condition is checked to allow a fallback to the Optimus DSM for device poweroff. Initially I wanted to call pci_d3cold_enable before checking bridge_d3 (in case the user changed d3cold_allowed), but that is such an unlikely case and likely fragile anyway. The current patch is suggested by Mika in http://www.spinics.net/lists/linux-pci/msg52599.html Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Peter Wu <peter@lekensteyn.nl> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2016-08-31PM / runtime: Add _rcuidle suffix to allow rpm_idle() use from idlePaul E. McKenney1-3/+3
This commit appends a few _rcuidle suffixes to fix the following RCU-used-from-idle bug: > =============================== > [ INFO: suspicious RCU usage. ] > 4.6.0-rc5-next-20160426+ #1116 Not tainted > ------------------------------- > include/trace/events/rpm.h:95 suspicious rcu_dereference_check() usage! > > other info that might help us debug this: > > > RCU used illegally from idle CPU! > rcu_scheduler_active = 1, debug_locks = 0 > RCU used illegally from extended quiescent state! > 1 lock held by swapper/0/0: > #0: (&(&dev->power.lock)->rlock){-.-...}, at: [<c052cc2c>] __rpm_callback+0x58/0x60 > > stack backtrace: > CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.6.0-rc5-next-20160426+ #1116 > Hardware name: Generic OMAP36xx (Flattened Device Tree) > [<c0110290>] (unwind_backtrace) from [<c010c3a8>] (show_stack+0x10/0x14) > [<c010c3a8>] (show_stack) from [<c047fd68>] (dump_stack+0xb0/0xe4) > [<c047fd68>] (dump_stack) from [<c052d5d0>] (rpm_suspend+0x580/0x768) > [<c052d5d0>] (rpm_suspend) from [<c052ec58>] (__pm_runtime_suspend+0x64/0x84) > [<c052ec58>] (__pm_runtime_suspend) from [<c04bf25c>] (omap2_gpio_prepare_for_idle+0x5c/0x70) > [<c04bf25c>] (omap2_gpio_prepare_for_idle) from [<c0125568>] (omap_sram_idle+0x140/0x244) > [<c0125568>] (omap_sram_idle) from [<c01269dc>] (omap3_enter_idle_bm+0xfc/0x1ec) > [<c01269dc>] (omap3_enter_idle_bm) from [<c0601bdc>] (cpuidle_enter_state+0x80/0x3d4) > [<c0601bdc>] (cpuidle_enter_state) from [<c0183b08>] (cpu_startup_entry+0x198/0x3a0) > [<c0183b08>] (cpu_startup_entry) from [<c0b00c0c>] (start_kernel+0x354/0x3c8) > [<c0b00c0c>] (start_kernel) from [<8000807c>] (0x8000807c) In the immortal words of Steven Rostedt, "*Whack* *Whack* *Whack*!!!" Reported-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Guenter Roeck <linux@roeck-us.net> WhACKED-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-08-31PM / runtime: Add _rcuidle suffix to allow rpm_resume() to be called from idlePaul E. McKenney1-2/+2
This commit applies another _rcuidle suffix to fix an RCU use from idle. > =============================== > [ INFO: suspicious RCU usage. ] > 4.6.0-rc5-next-20160426+ #1122 Not tainted > ------------------------------- > include/trace/events/rpm.h:69 suspicious rcu_dereference_check() usage! > > other info that might help us debug this: > > > RCU used illegally from idle CPU! > rcu_scheduler_active = 1, debug_locks = 0 > RCU used illegally from extended quiescent state! > 1 lock held by swapper/0/0: > #0: (&(&dev->power.lock)->rlock){-.-...}, at: [<c052e3dc>] __pm_runtime_resume+0x3c/0x64 > > stack backtrace: > CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.6.0-rc5-next-20160426+ #1122 > Hardware name: Generic OMAP36xx (Flattened Device Tree) > [<c0110290>] (unwind_backtrace) from [<c010c3a8>] (show_stack+0x10/0x14) > [<c010c3a8>] (show_stack) from [<c047fd68>] (dump_stack+0xb0/0xe4) > [<c047fd68>] (dump_stack) from [<c052e178>] (rpm_resume+0x5cc/0x7f4) > [<c052e178>] (rpm_resume) from [<c052e3ec>] (__pm_runtime_resume+0x4c/0x64) > [<c052e3ec>] (__pm_runtime_resume) from [<c04bf2c4>] (omap2_gpio_resume_after_idle+0x54/0x68) > [<c04bf2c4>] (omap2_gpio_resume_after_idle) from [<c01269dc>] (omap3_enter_idle_bm+0xfc/0x1ec) > [<c01269dc>] (omap3_enter_idle_bm) from [<c060198c>] (cpuidle_enter_state+0x80/0x3d4) > [<c060198c>] (cpuidle_enter_state) from [<c0183b08>] (cpu_startup_entry+0x198/0x3a0) > [<c0183b08>] (cpu_startup_entry) from [<c0b00c0c>] (start_kernel+0x354/0x3c8) > [<c0b00c0c>] (start_kernel) from [<8000807c>] (0x8000807c) Reported-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-08-31cpufreq: dt: Add terminate entry for of_device_id tablesWei Yongjun1-0/+2
Make sure of_device_id tables are NULL terminated. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Fixes: f56aad1d98f1 (cpufreq: dt: Add generic platform-device creation support) CC: 4.7+ <stable@vger.kernel.org> # 4.7+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-08-30dm bufio: remove use of deprecated create_singlethread_workqueue()Bhaktipriya Shridhar1-1/+1
The workqueue "dm_bufio_wq" queues a single work item &dm_bufio_work so it doesn't require execution ordering. Hence, alloc_workqueue() has been used to replace the deprecated create_singlethread_workqueue(). The WQ_MEM_RECLAIM flag has been set since DM requires forward progress under memory pressure. Since there are fixed number of work items, explicit concurrency limit is unnecessary here. Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2016-08-30dm crypt: fix free of bad values after tfm allocation failureEric Biggers1-1/+1
If crypt_alloc_tfms() had to allocate multiple tfms and it failed before the last allocation, then it would call crypt_free_tfms() and could free pointers from uninitialized memory -- due to the crypt_free_tfms() check for non-zero cc->tfms[i]. Fix by allocating zeroed memory. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org
2016-08-30dm crypt: fix error with too large biosMikulas Patocka1-0/+7
When dm-crypt processes writes, it allocates a new bio in crypt_alloc_buffer(). The bio is allocated from a bio set and it can have at most BIO_MAX_PAGES vector entries, however the incoming bio can be larger (e.g. if it was allocated by bcache). If the incoming bio is larger, bio_alloc_bioset() fails and an error is returned. To avoid the error, we test for a too large bio in the function crypt_map() and use dm_accept_partial_bio() to split the bio. dm_accept_partial_bio() trims the current bio to the desired size and asks DM core to send another bio with the rest of the data. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org # v3.16+
2016-08-30dm log writes: fix check of kthread_run() return valueVladimir Zapolskiy1-2/+2
The kthread_run() function returns either a valid task_struct or ERR_PTR() value, check for NULL is invalid. This change fixes potential for oops, e.g. in OOM situation. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org
2016-08-30dm log writes: fix bug with too large biosMikulas Patocka1-2/+2
bio_alloc() can allocate a bio with at most BIO_MAX_PAGES (256) vector entries. However, the incoming bio may have more vector entries if it was allocated by other means. For example, bcache submits bios with more than BIO_MAX_PAGES entries. This results in bio_alloc() failure. To avoid the failure, change the code so that it allocates bio with at most BIO_MAX_PAGES entries. If the incoming bio has more entries, bio_add_page() will fail and a new bio will be allocated - the code that handles bio_add_page() failure already exists in the dm-log-writes target. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Reviewed-by: Josef Bacik <jbacik@fb,com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org # v4.1+