| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
If the boot firmware implements connection manager of its own it may not
create the paths in the same way or order we do. For example it may
create first PCIe tunnel and then USB3 tunnel. When we restore our
tunnels (first de-activating them) we may be doing that over completely
different tunnels and that leaves them possibly non-functional. For this
reason we re-use the tunnel discovery functionality and find out all the
existing tunnels, and tear them down. Once that is done we can restore
our tunnels.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
If protocol tunnels are already up when the driver is loaded, for
instance if the boot firmware implements connection manager of its own,
runtime PM reference count of the consumer devices behind the tunnel
might have been increased already before the device link is created but
the supplier device runtime PM reference count is not. This leads to a
situation where the supplier (the Thunderbolt driver) can runtime
suspend even if it should not because the corresponding protocol tunnel
needs to be up causing the devices to be removed from the corresponding
native bus.
Prevent this from happening by making both sides of the link runtime PM
active briefly. The pm_runtime_put() for the consumer (PCIe
root/downstream port, xHCI) then allows it to runtime suspend again but
keeps the supplier runtime resumed the whole time it is runtime active.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
tb_xdp_properties_changed_request() was calling tb_xdp_handle_error() with
a struct tb_xdp_properties_changed_response on the stack, which does not
have the "error" field present when cast to struct tb_xdp_error_response.
This was detected when building with -Warray-bounds:
drivers/thunderbolt/xdomain.c: In function 'tb_xdomain_properties_changed':
drivers/thunderbolt/xdomain.c:226:22: error: array subscript 'const struct tb_xdp_error_response[0]' is partly outside array bounds of 'struct tb_xdp_properties_changed_response[1]' [-Werror=array-bounds]
226 | switch (error->error) {
| ~~~~~^~~~~~~
drivers/thunderbolt/xdomain.c:448:51: note: while referencing 'res'
448 | struct tb_xdp_properties_changed_response res;
| ^~~
Add union containing struct tb_xdp_error_response to structures passed
to tb_xdp_handle_error(), so that the "error" field will be present.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
"Some bug and warning fixes:
- Fix "make install" to use debians "installkernel" script which is
now in /usr/sbin
- Fix the bindeb-pkg make target by giving the correct KBUILD_IMAGE
file name
- Fix compiler warnings by annotating parisc agp init functions with
__init
- Fix timekeeping on SMP machines with dual-core CPUs
- Enable some more config options in the 64-bit defconfig"
* tag 'for-5.16/parisc-6' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Mark cr16 CPU clocksource unstable on all SMP machines
parisc: Fix "make install" on newer debian releases
parisc/agp: Annotate parisc agp init functions with __init
parisc: Enable sata sil, audit and usb support on 64-bit defconfig
parisc: Fix KBUILD_IMAGE for self-extracting kernel
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes for a few reported issues. Included in
here are:
- xhci fix for a _much_ reported regression. I don't think there's a
community distro that has not reported this problem yet :(
- new USB quirk addition
- cdns3 minor fixes
- typec regression fix.
All of these have been in linux-next with no reported problems, and
the xhci fix has been reported by many to resolve their reported
problem"
* tag 'usb-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: cdnsp: Fix a NULL pointer dereference in cdnsp_endpoint_init()
usb: cdns3: gadget: fix new urb never complete if ep cancel previous requests
usb: typec: tcpm: Wait in SNK_DEBOUNCED until disconnect
USB: NO_LPM quirk Lenovo Powered USB-C Travel Hub
xhci: Fix commad ring abort, write all 64 bits to CRCR register.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some small TTY and Serial driver fixes for 5.16-rc4 to
resolve a number of reported problems.
They include:
- liteuart serial driver fixes
- 8250_pci serial driver fixes for pericom devices
- 8250 RTS line control fix while in RS-485 mode
- tegra serial driver fix
- msm_serial driver fix
- pl011 serial driver new id
- fsl_lpuart revert of broken change
- 8250_bcm7271 serial driver fix
- MAINTAINERS file update for rpmsg tty driver that came in 5.16-rc1
- vgacon fix for reported problem
All of these, except for the 8250_bcm7271 fix have been in linux-next
with no reported problem. The 8250_bcm7271 fix was added to the tree
on Friday so no chance to be linux-next yet. But it should be fine as
the affected developers submitted it"
* tag 'tty-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250_bcm7271: UART errors after resuming from S2
serial: 8250_pci: rewrite pericom_do_set_divisor()
serial: 8250_pci: Fix ACCES entries in pci_serial_quirks array
serial: 8250: Fix RTS modem control while in rs485 mode
Revert "tty: serial: fsl_lpuart: drop earlycon entry for i.MX8QXP"
serial: tegra: Change lower tolerance baud rate limit for tegra20 and tegra30
serial: liteuart: relax compile-test dependencies
serial: liteuart: fix minor-number leak on probe errors
serial: liteuart: fix use-after-free and memleak on unbind
serial: liteuart: Fix NULL pointer dereference in ->remove()
vgacon: Propagate console boot parameters before calling `vc_resize'
tty: serial: msm_serial: Deactivate RX DMA for polling support
serial: pl011: Add ACPI SBSA UART match id
serial: core: fix transmit-buffer reset and memleak
MAINTAINERS: Add rpmsg tty driver maintainer
|
|
Pull block fix from Jens Axboe:
"A single fix for repeated printk spam from loop"
* tag 'block-5.16-2021-12-03' of git://git.kernel.dk/linux-block:
loop: Use pr_warn_once() for loop_control_remove() warning
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two patches, both in drivers.
One is a fix to FC recovery (lpfc) and the other is an enhancement to
support the Intel Alder Motherboard with the UFS driver which comes
under the -rc exception process for hardware enabling"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: ufs-pci: Add support for Intel ADL
scsi: lpfc: Fix non-recovery of remote ports following an unsolicited LOGO
|
|
Pull VFIO fixes from Alex Williamson:
- Fix OpRegion pointer arithmetic (Zhenyu Wang)
- Fix comment format triggering kernel-doc warnings (Randy Dunlap)
* tag 'vfio-v5.16-rc4' of git://github.com/awilliam/linux-vfio:
vfio/pci: Fix OpRegion read
vfio: remove all kernel-doc notation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a CPU hot-add issue in the cpufreq core, fix a comment in
the cpufreq core code and update its documentation, and disable the
DTPM (Dynamic Thermal Power Management) code for the time being to
prevent it from causing issues to appear.
Specifics:
- Disable DTPM for this cycle to prevent it from causing issues to
appear on otherwise functional systems (Daniel Lezcano)
- Fix cpufreq sysfs interface failure related to physical CPU hot-add
(Xiongfeng Wang)
- Fix comment in cpufreq core and update its documentation (Tang
Yizhou)"
* tag 'pm-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
powercap: DTPM: Drop unused local variable from init_dtpm()
cpufreq: docs: Update core.rst
cpufreq: Fix a comment in cpufreq_policy_free
powercap/drivers/dtpm: Disable DTPM at boot time
cpufreq: Fix get_cpu_device() failure in add_cpu_dev_symlink()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"I2C has another set of driver bugfixes, mostly for the stm32f7 driver"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: rk3x: Handle a spurious start completion interrupt flag
i2c: stm32f7: use proper DMAENGINE API for termination
i2c: stm32f7: stop dma transfer in case of NACK
i2c: stm32f7: recover the bus on access timeout
i2c: stm32f7: flush TX FIFO upon transfer errors
i2c: cbus-gpio: set atomic transfer callback
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull libata fixes from Damien Le Moal:
"Two sparse warning fixes and a couple of patches to fix an issue with
sata_fsl driver module removal:
- A couple of patches to avoid sparse warnings in libata-sata and in
the pata_falcon driver (from Yang and Finn).
- A couple of sata_fsl driver patches fixing IRQ free and proc
unregister on module removal (from Baokun)"
* tag 'libata-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: replace snprintf in show functions with sysfs_emit
sata_fsl: fix warning in remove_proc_entry when rmmod sata_fsl
sata_fsl: fix UAF in sata_fsl_port_stop when rmmod sata_fsl
pata_falcon: Avoid type warnings from sparse
|
|
Merge DTPM fixes for 5.16-rc4.
* powercap:
powercap: DTPM: Drop unused local variable from init_dtpm()
powercap/drivers/dtpm: Disable DTPM at boot time
|
|
The dtpm_descr variable in init_dtpm() is not used after commit
f751db8adaea ("powercap/drivers/dtpm: Disable DTPM at boot time"),
so drop it.
Fixes: f751db8adaea ("powercap/drivers/dtpm: Disable DTPM at boot time")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
There is a small window in time during resume where the hardware
flow control signal RTS can be asserted (which allows a sender to
resume sending data to the UART) but the baud rate has not yet
been restored. This will cause corrupted data and FRAMING, OVERRUN
and BREAK errors. This is happening because the MCTRL register is
shadowed in uart_port struct and is later used during resume to set
the MCTRL register during both serial8250_do_startup() and
uart_resume_port(). Unfortunately, serial8250_do_startup()
happens before the UART baud rate is restored. The fix is to clear
the shadowed mctrl value at the end of suspend and restore it at the
end of resume.
Fixes: 41a469482de2 ("serial: 8250: Add new 8250-core based Broadcom STB driver")
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Link: https://lore.kernel.org/r/20211201201402.47446-1-alcooperx@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In cdnsp_endpoint_init(), cdnsp_ring_alloc() is assigned to pep->ring
and there is a dereference of it in cdnsp_endpoint_init(), which could
lead to a NULL pointer dereference on failure of cdnsp_ring_alloc().
Fix this bug by adding a check of pep->ring.
This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.
Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.
Builds with CONFIG_USB_CDNSP_GADGET=y show no new warnings,
and our static analyzer no longer warns about this code.
Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
Cc: stable <stable@vger.kernel.org>
Acked-by: Pawel Laszczak <pawell@cadence.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Link: https://lore.kernel.org/r/20211130172700.206650-1-zhou1615@umn.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This issue was found at android12 MTP.
1. MTP submit many out urb request.
2. Cancel left requests (>20) when enough data get from host
3. Send ACK by IN endpoint.
4. MTP submit new out urb request.
5. 4's urb never complete.
TRACE LOG:
MtpServer-2157 [000] d..3 1287.150391: cdns3_ep_dequeue: ep1out: req: 00000000299e6836, req buff 000000009df42287, length: 0/16384 zsi, status: -115, trb: [start:87, end:87: virt addr 0x80004000ffd50420], flags:1 SID: 0
MtpServer-2157 [000] d..3 1287.150410: cdns3_gadget_giveback: ep1out: req: 00000000299e6836, req buff 000000009df42287, length: 0/16384 zsi, status: -104, trb: [start:87, end:87: virt addr 0x80004000ffd50420], flags:0 SID: 0
MtpServer-2157 [000] d..3 1287.150433: cdns3_ep_dequeue: ep1out: req: 0000000080b7bde6, req buff 000000009ed5c556, length: 0/16384 zsi, status: -115, trb: [start:88, end:88: virt addr 0x80004000ffd5042c], flags:1 SID: 0
MtpServer-2157 [000] d..3 1287.150446: cdns3_gadget_giveback: ep1out: req: 0000000080b7bde6, req buff 000000009ed5c556, length: 0/16384 zsi, status: -104, trb: [start:88, end:88: virt addr 0x80004000ffd5042c], flags:0 SID: 0
....
MtpServer-2157 [000] d..1 1293.630410: cdns3_alloc_request: ep1out: req: 00000000afbccb7d, req buff 0000000000000000, length: 0/0 zsi, status: 0, trb: [start:0, end:0: virt addr (null)], flags:0 SID: 0
MtpServer-2157 [000] d..2 1293.630421: cdns3_ep_queue: ep1out: req: 00000000afbccb7d, req buff 00000000871caf90, length: 0/512 zsi, status: -115, trb: [start:0, end:0: virt addr (null)], flags:0 SID: 0
MtpServer-2157 [000] d..2 1293.630445: cdns3_wa1: WA1: ep1out set guard
MtpServer-2157 [000] d..2 1293.630450: cdns3_wa1: WA1: ep1out restore cycle bit
MtpServer-2157 [000] d..2 1293.630453: cdns3_prepare_trb: ep1out: trb 000000007317b3ee, dma buf: 0xffd5bc00, size: 512, burst: 128 ctrl: 0x00000424 (C=0, T=0, ISP, IOC, Normal) SID:0 LAST_SID:0
MtpServer-2157 [000] d..2 1293.630460: cdns3_doorbell_epx: ep1out, ep_trbaddr ffd50414
....
irq/241-5b13000-2154 [000] d..1 1293.680849: cdns3_epx_irq: IRQ for ep1out: 01000408 ISP , ep_traddr: ffd508ac ep_last_sid: 00000000 use_streams: 0
irq/241-5b13000-2154 [000] d..1 1293.680858: cdns3_complete_trb: ep1out: trb 0000000021a11b54, dma buf: 0xffd50420, size: 16384, burst: 128 ctrl: 0x00001810 (C=0, T=0, CHAIN, LINK) SID:0 LAST_SID:0
irq/241-5b13000-2154 [000] d..1 1293.680865: cdns3_request_handled: Req: 00000000afbccb7d not handled, DMA pos: 185, ep deq: 88, ep enq: 185, start trb: 184, end trb: 184
Actually DMA pos already bigger than previous submit request afbccb7d's TRB (184-184). The reason of (not handled) is that deq position is wrong.
The TRB link is below when irq happen.
DEQ LINK LINK LINK LINK LINK .... TRB(afbccb7d):START DMA(EP_TRADDR).
Original code check LINK TRB, but DEQ just move one step.
LINK DEQ LINK LINK LINK LINK .... TRB(afbccb7d):START DMA(EP_TRADDR).
This patch skip all LINK TRB and sync DEQ to trb's start.
LINK LINK LINK LINK LINK .... DEQ = TRB(afbccb7d):START DMA(EP_TRADDR).
Acked-by: Peter Chen <peter.chen@kernel.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Jun Li <jun.li@nxp.com>
Link: https://lore.kernel.org/r/20211130154239.8029-1-Frank.Li@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Stub from the spec:
"4.5.2.2.4.2 Exiting from AttachWait.SNK State
A Sink shall transition to Unattached.SNK when the state of both
the CC1 and CC2 pins is SNK.Open for at least tPDDebounce.
A DRP shall transition to Unattached.SRC when the state of both
the CC1 and CC2 pins is SNK.Open for at least tPDDebounce."
This change makes TCPM to wait in SNK_DEBOUNCED state until
CC1 and CC2 pins is SNK.Open for at least tPDDebounce. Previously,
TCPM resets the port if vbus is not present in PD_T_PS_SOURCE_ON.
This causes TCPM to loop continuously when connected to a
faulty power source that does not present vbus. Waiting in
SNK_DEBOUNCED also ensures that TCPM is adherant to
"4.5.2.2.4.2 Exiting from AttachWait.SNK State" requirements.
[ 6169.280751] CC1: 0 -> 0, CC2: 0 -> 5 [state TOGGLING, polarity 0, connected]
[ 6169.280759] state change TOGGLING -> SNK_ATTACH_WAIT [rev2 NONE_AMS]
[ 6169.280771] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev2 NONE_AMS]
[ 6169.282427] CC1: 0 -> 0, CC2: 5 -> 5 [state SNK_ATTACH_WAIT, polarity 0, connected]
[ 6169.450825] state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED [delayed 170 ms]
[ 6169.450834] pending state change SNK_DEBOUNCED -> PORT_RESET @ 480 ms [rev2 NONE_AMS]
[ 6169.930892] state change SNK_DEBOUNCED -> PORT_RESET [delayed 480 ms]
[ 6169.931296] disable vbus discharge ret:0
[ 6169.931301] Setting usb_comm capable false
[ 6169.932783] Setting voltage/current limit 0 mV 0 mA
[ 6169.932802] polarity 0
[ 6169.933706] Requesting mux state 0, usb-role 0, orientation 0
[ 6169.936689] cc:=0
[ 6169.936812] pending state change PORT_RESET -> PORT_RESET_WAIT_OFF @ 100 ms [rev2 NONE_AMS]
[ 6169.937157] CC1: 0 -> 0, CC2: 5 -> 0 [state PORT_RESET, polarity 0, disconnected]
[ 6170.036880] state change PORT_RESET -> PORT_RESET_WAIT_OFF [delayed 100 ms]
[ 6170.036890] state change PORT_RESET_WAIT_OFF -> SNK_UNATTACHED [rev2 NONE_AMS]
[ 6170.036896] Start toggling
[ 6170.041412] CC1: 0 -> 0, CC2: 0 -> 0 [state TOGGLING, polarity 0, disconnected]
[ 6170.042973] CC1: 0 -> 0, CC2: 0 -> 5 [state TOGGLING, polarity 0, connected]
[ 6170.042976] state change TOGGLING -> SNK_ATTACH_WAIT [rev2 NONE_AMS]
[ 6170.042981] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev2 NONE_AMS]
[ 6170.213014] state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED [delayed 170 ms]
[ 6170.213019] pending state change SNK_DEBOUNCED -> PORT_RESET @ 480 ms [rev2 NONE_AMS]
[ 6170.693068] state change SNK_DEBOUNCED -> PORT_RESET [delayed 480 ms]
[ 6170.693304] disable vbus discharge ret:0
[ 6170.693308] Setting usb_comm capable false
[ 6170.695193] Setting voltage/current limit 0 mV 0 mA
[ 6170.695210] polarity 0
[ 6170.695990] Requesting mux state 0, usb-role 0, orientation 0
[ 6170.701896] cc:=0
[ 6170.702181] pending state change PORT_RESET -> PORT_RESET_WAIT_OFF @ 100 ms [rev2 NONE_AMS]
[ 6170.703343] CC1: 0 -> 0, CC2: 5 -> 0 [state PORT_RESET, polarity 0, disconnected]
Fixes: f0690a25a140b8 ("staging: typec: USB Type-C Port Manager (tcpm)")
Cc: stable@vger.kernel.org
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/r/20211130001825.3142830-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This is another branded 8153 device that doesn't work well with LPM:
r8152 2-2.1:1.0 enp0s13f0u2u1: Stop submitting intr, status -71
Disable LPM to resolve the issue.
Signed-off-by: Ole Ernst <olebowle@gmx.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211127090546.52072-1-olebowle@gmx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Turns out some xHC controllers require all 64 bits in the CRCR register
to be written to execute a command abort.
The lower 32 bits containing the command abort bit is written first.
In case the command ring stops before we write the upper 32 bits then
hardware may use these upper bits to set the commnd ring dequeue pointer.
Solve this by making sure the upper 32 bits contain a valid command
ring dequeue pointer.
The original patch that only wrote the first 32 to stop the ring went
to stable, so this fix should go there as well.
Fixes: ff0e50d3564f ("xhci: Fix command ring pointer corruption while aborting a command")
Cc: stable@vger.kernel.org
Tested-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20211126122340.1193239-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Pull drm fixes from Dave Airlie:
"Bit of an uptick in patch count this week, though it's all relatively
small overall.
I suspect msm has been queuing up a few fixes to skew it here.
Otherwise amdgpu has a scattered bunch of small fixes, and then some
vc4, i915.
virtio-gpu changes an rc1 introduced uAPI mistake, and makes it
operate more like other drivers. This should be fine as no userspace
relies on the behaviour yet.
Summary:
dma-buf:
- memory leak fix
msm:
- kasan found memory overwrite
- mmap flags
- fencing error bug
- ioctl NULL ptr
- uninit var
- devfreqless devices fix
- dsi lanes fix
- dp: avoid unpowered aux xfers
amdgpu:
- IP discovery based enumeration fixes
- vkms fixes
- DSC fixes for DP MST
- Audio fix for hotplug with tiled displays
- Misc display fixes
- DP tunneling fix
- DP fix
- Aldebaran fix
amdkfd:
- Locking fix
- Static checker fix
- Fix double free
i915:
- backlight regression
- Intel HDR backlight detection fix
- revert TGL workaround that caused hangs
virtio-gpu:
- switch back to drm_poll
vc4:
- memory leak
- error check fix
- HVS modesetting fixes"
* tag 'drm-fixes-2021-12-03-1' of git://anongit.freedesktop.org/drm/drm: (41 commits)
Revert "drm/i915: Implement Wa_1508744258"
drm/amdkfd: process_info lock not needed for svm
drm/amdgpu: adjust the kfd reset sequence in reset sriov function
drm/amd/display: add connector type check for CRC source set
drm/amdkfd: fix double free mem structure
drm/amdkfd: set "r = 0" explicitly before goto
drm/amd/display: Add work around for tunneled MST.
drm/amd/display: Fix for the no Audio bug with Tiled Displays
drm/amd/display: Clear DPCD lane settings after repeater training
drm/amd/display: Allow DSC on supported MST branch devices
drm/amdgpu: Don't halt RLC on GFX suspend
drm/amdgpu: fix the missed handling for SDMA2 and SDMA3
drm/amdgpu: check atomic flag to differeniate with legacy path
drm/amdgpu: cancel the correct hrtimer on exit
drm/amdgpu/sriov/vcn: add new vcn ip revision check case for SIENNA_CICHLID
drm/i915/dp: Perform 30ms delay after source OUI write
dma-buf: system_heap: Use 'for_each_sgtable_sg' in pages free flow
drm/i915: Add support for panels with VESA backlights with PWM enable/disable
drm/vc4: kms: Fix previous HVS commit wait
drm/vc4: kms: Don't duplicate pending commit
...
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Fixing a regression where the backlight brightness control stopped working.
- Fix the Intel HDR backlight support detection.
- Reverting a w/a to fix a gpu Hang in TGL. The w/a itself was also
for a hang, but in a much rarer scenario. The proper solution need
to be done with help from user space and it will be addressed later.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Yakf9hdnR5or+zNP@intel.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Switch back to drm_poll for virtio, multiple fixes (memory leak,
improper error check, some functional fixes too) for vc4, memory leak
fix in dma-buf,
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211202084440.u3b7lbeulj7k3ltg@houat
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless, and wireguard.
Mostly scattered driver changes this week, with one big clump in
mv88e6xxx. Nothing of note, really.
Current release - regressions:
- smc: keep smc_close_final()'s error code during active close
Current release - new code bugs:
- iwlwifi: various static checker fixes (int overflow, leaks, missing
error codes)
- rtw89: fix size of firmware header before transfer, avoid crash
- mt76: fix timestamp check in tx_status; fix pktid leak;
- mscc: ocelot: fix missing unlock on error in ocelot_hwstamp_set()
Previous releases - regressions:
- smc: fix list corruption in smc_lgr_cleanup_early
- ipv4: convert fib_num_tclassid_users to atomic_t
Previous releases - always broken:
- tls: fix authentication failure in CCM mode
- vrf: reset IPCB/IP6CB when processing outbound pkts, prevent
incorrect processing
- dsa: mv88e6xxx: fixes for various device errata
- rds: correct socket tunable error in rds_tcp_tune()
- ipv6: fix memory leak in fib6_rule_suppress
- wireguard: reset peer src endpoint when netns exits
- wireguard: improve resilience to DoS around incoming handshakes
- tcp: fix page frag corruption on page fault which involves TCP
- mpls: fix missing attributes in delete notifications
- mt7915: fix NULL pointer dereference with ad-hoc mode
Misc:
- rt2x00: be more lenient about EPROTO errors during start
- mlx4_en: update reported link modes for 1/10G"
* tag 'net-5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (85 commits)
net: dsa: b53: Add SPI ID table
gro: Fix inconsistent indenting
selftests: net: Correct case name
net/rds: correct socket tunable error in rds_tcp_tune()
mctp: Don't let RTM_DELROUTE delete local routes
net/smc: Keep smc_close_final rc during active close
ibmvnic: drop bad optimization in reuse_tx_pools()
ibmvnic: drop bad optimization in reuse_rx_pools()
net/smc: fix wrong list_del in smc_lgr_cleanup_early
Fix Comment of ETH_P_802_3_MIN
ethernet: aquantia: Try MAC address from device tree
ipv4: convert fib_num_tclassid_users to atomic_t
net: avoid uninit-value from tcp_conn_request
net: annotate data-races on txq->xmit_lock_owner
octeontx2-af: Fix a memleak bug in rvu_mbox_init()
net/mlx4_en: Fix an use-after-free bug in mlx4_en_try_alloc_resources()
vrf: Reset IPCB/IP6CB when processing outbound pkts in vrf dev xmit
net: qlogic: qlcnic: Fix a NULL pointer dereference in qlcnic_83xx_add_rings()
net: dsa: mv88e6xxx: Link in pcs_get_state() if AN is bypassed
net: dsa: mv88e6xxx: Fix inband AN for 2500base-x on 88E6393X family
...
|
|
Pull IPMI fixes from Corey Minyard:
"Some changes that went in 5.16 had issues. When working on the design
a piece was redesigned and things got missed. And the message type was
not being initialized when it was allocated, resulting in crashes.
In addition, the IPMI driver has had a shutdown issue where it could
still have an item in a system workqueue after it had been shutdown.
Move to a private workqueue to avoid that problem"
* tag 'for-linus-5.16-2' of git://github.com/cminyard/linux-ipmi:
ipmi:ipmb: Fix unknown command response
ipmi: fix IPMI_SMI_MSG_TYPE_IPMB_DIRECT response length checking
ipmi: fix oob access due to uninit smi_msg type
ipmi: msghandler: Make symbol 'remove_work_wq' static
ipmi: Move remove_work to dedicated workqueue
|
|
This workarounds are causing hangs, because I missed the fact that it
needs to be enabled for all cases and disabled when doing a resolve
pass.
So KMD only needs to whitelist it and UMD will be the one setting it
on per case.
This reverts commit 28ec02c9cbebf3feeaf21a59df9dfbc02bda3362.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4145
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Fixes: 28ec02c9cbeb ("drm/i915: Implement Wa_1508744258")
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211119140931.32791-1-jose.souza@intel.com
(cherry picked from commit f3799ff16fcfacd44aee55db162830df461b631f)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Currently autoloading for SPI devices does not use the DT ID table, it
uses SPI modalises. Supporting OF modalises is going to be difficult if
not impractical, an attempt was made but has been reverted, so ensure
that module autoloading works for this driver by adding an id_table
listing the SPI IDs for everything.
Fixes: 96c8395e2166 ("spi: Revert modalias changes")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When trying to decide whether or not reuse existing rx/tx pools
we tried to allow a range of values for the pool parameters rather
than exact matches. This was intended to reuse the resources for
instance when switching between two VIO servers with different
default parameters.
But this optimization is incomplete and breaks when we try to
change the number of queues for instance. The optimization needs
to be updated, so drop it for now and simplify the code.
Fixes: bbd809305bc7 ("ibmvnic: Reuse tx pools when possible")
Reported-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Reviewed-by: Dany Madden <drt@linux.ibm.com>
Reviewed-by: Rick Lindsley <ricklind@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When trying to decide whether or not reuse existing rx/tx pools
we tried to allow a range of values for the pool parameters rather
than exact matches. This was intended to reuse the resources for
instance when switching between two VIO servers with different
default parameters.
But this optimization is incomplete and breaks when we try to
change the number of queues for instance. The optimization needs
to be updated, so drop it for now and simplify the code.
Fixes: 489de956e7a2 ("ibmvnic: Reuse rx pools when possible")
Reported-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Reviewed-by: Dany Madden <drt@linux.ibm.com>
Reviewed-by: Rick Lindsley <ricklind@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Apple M1 Mac minis (2020) with 10GE NICs do not have MAC address in the
card, but instead need to obtain MAC addresses from the device tree. In
this case the hardware will report an invalid MAC.
Currently atlantic driver does not query the DT for MAC address and will
randomly assign a MAC if the NIC doesn't have a permanent MAC burnt in.
This patch causes the driver to perfer a valid MAC address from OF (if
present) over HW self-reported MAC and only fall back to a random MAC
address when neither of them is valid.
Signed-off-by: Tianhao Chai <cth451@gmail.com>
Reviewed-by: Igor Russkikh <irusskikh@marvell.com>
Reviewed-by: Hector Martin <marcan@marcan.st>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
coccinelle report：
./drivers/ata/libata-sata.c:830:8-16:
WARNING: use scnprintf or sprintf
Use sysfs_emit instead of scnprintf or sprintf makes more sense.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Yang Guang <yang.guang5@zte.com.cn>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
In rvu_mbox_init(), mbox_regions is not freed or passed out
under the switch-default region, which could lead to a memory leak.
Fix this bug by changing 'return err' to 'goto free_regions'.
This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.
Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.
Builds with CONFIG_OCTEONTX2_AF=y show no new warnings,
and our static analyzer no longer warns about this code.
Fixes: 98c561116360 (“octeontx2-af: cn10k: Add mbox support for CN10K platform”)
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Link: https://lore.kernel.org/r/20211130165039.192426-1-zhou1615@umn.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In mlx4_en_try_alloc_resources(), mlx4_en_copy_priv() is called and
tmp->tx_cq will be freed on the error path of mlx4_en_copy_priv().
After that mlx4_en_alloc_resources() is called and there is a dereference
of &tmp->tx_cq[t][i] in mlx4_en_alloc_resources(), which could lead to
a use after free problem on failure of mlx4_en_copy_priv().
Fix this bug by adding a check of mlx4_en_copy_priv()
This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.
Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.
Builds with CONFIG_MLX4_EN=m show no new warnings,
and our static analyzer no longer warns about this code.
Fixes: ec25bc04ed8e ("net/mlx4_en: Add resilience in low memory systems")
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20211130164438.190591-1-zhou1615@umn.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
IPCB/IP6CB need to be initialized when processing outbound v4 or v6 pkts
in the codepath of vrf device xmit function so that leftover garbage
doesn't cause futher code that uses the CB to incorrectly process the
pkt.
One occasion of the issue might occur when MPLS route uses the vrf
device as the outgoing device such as when the route is added using "ip
-f mpls route add <label> dev <vrf>" command.
The problems seems to exist since day one. Hence I put the day one
commits on the Fixes tags.
Fixes: 193125dbd8eb ("net: Introduce VRF device driver")
Fixes: 35402e313663 ("net: Add IPv6 support to VRF device")
Cc: stable@vger.kernel.org
Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20211130162637.3249-1-ssuryaextr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In qlcnic_83xx_add_rings(), the indirect function of
ahw->hw_ops->alloc_mbx_args will be called to allocate memory for
cmd.req.arg, and there is a dereference of it in qlcnic_83xx_add_rings(),
which could lead to a NULL pointer dereference on failure of the
indirect function like qlcnic_83xx_alloc_mbx_args().
Fix this bug by adding a check of alloc_mbx_args(), this patch
imitates the logic of mbx_cmd()'s failure handling.
This bug was found by a static analyzer. The analysis employs
differential checking to identify inconsistent security operations
(e.g., checks or kfrees) between two code paths and confirms that the
inconsistent operations are not recovered in the current function or
the callers, so they constitute bugs.
Note that, as a bug found by static analysis, it can be a false
positive or hard to trigger. Multiple researchers have cross-reviewed
the bug.
Builds with CONFIG_QLCNIC=m show no new warnings, and our
static analyzer no longer warns about this code.
Fixes: 7f9664525f9c ("qlcnic: 83xx memory map and HW access routine")
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Link: https://lore.kernel.org/r/20211130110848.109026-1-zhou1615@umn.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-5.16-2021-12-01:
amdgpu:
- IP discovery based enumeration fixes
- vkms fixes
- DSC fixes for DP MST
- Audio fix for hotplug with tiled displays
- Misc display fixes
- DP tunneling fix
- DP fix
- Aldebaran fix
amdkfd:
- Locking fix
- Static checker fix
- Fix double free
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211201232802.5801-1-alexander.deucher@amd.com
|
|
https://gitlab.freedesktop.org/drm/msm into drm-fixes
msm misc fixes, build, display
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGsV-ntO_u323XMKuD6bgbgvXporwi1sbyXwNDAuA52Afw@mail.gmail.com
|
|
process_info->lock is used to protect kfd_bo_list, vm_list_head, n_vms
and userptr valid/inval list, svm_range_restore_work and
svm_range_set_attr don't access those, so do not need to take
process_info lock. This will avoid potential circular locking issue.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This change revert previous commits:
9f4f2c1a3524 ("drm/amd/amdgpu: fix the kfd pre_reset sequence in sriov")
271fd38ce56d ("drm/amdgpu: move kfd post_reset out of reset_sriov function")
This change moves the amdgpu_amdkfd_pre_reset to an earlier place
in amdgpu_device_reset_sriov, presumably to address the sequence issue
that the first patch was originally meant to fix.
Some register access(GRBM_GFX_CNTL) only be allowed on full access
mode. Move kfd_pre_reset and kfd_post_reset back inside reset_sriov
function.
Fixes: 9f4f2c1a3524 ("drm/amd/amdgpu: fix the kfd pre_reset sequence in sriov")
Fixes: 271fd38ce56d ("drm/amdgpu: move kfd post_reset out of reset_sriov function")
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
IGT bypass test will set crc source as DPRX,and display DM didn`t check
connection type, it run the test on the HDMI connector ,then the kernel
will be crashed because aux->transfer is set null for HDMI connection.
This patch will skip the invalid connection test and fix kernel crash issue.
[How]
Check the connector type while setting the pipe crc source as DPRX or
auto,if the type is not DP or eDP, the crtc crc source will not be set
and report error code to IGT test,IGT will show the this subtest as no
valid crtc/connector combinations found.
116.779714] [IGT] amd_bypass: starting subtest 8bpc-bypass-mode
[ 117.730996] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 117.731001] #PF: supervisor instruction fetch in kernel mode
[ 117.731003] #PF: error_code(0x0010) - not-present page
[ 117.731004] PGD 0 P4D 0
[ 117.731006] Oops: 0010 [#1] SMP NOPTI
[ 117.731009] CPU: 11 PID: 2428 Comm: amd_bypass Tainted: G OE 5.11.0-34-generic #36~20.04.1-Ubuntu
[ 117.731011] Hardware name: AMD CZN/, BIOS AB.FD 09/07/2021
[ 117.731012] RIP: 0010:0x0
[ 117.731015] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6.
[ 117.731016] RSP: 0018:ffffa8d64225bab8 EFLAGS: 00010246
[ 117.731017] RAX: 0000000000000000 RBX: 0000000000000020 RCX: ffffa8d64225bb5e
[ 117.731018] RDX: ffff93151d921880 RSI: ffffa8d64225bac8 RDI: ffff931511a1a9d8
[ 117.731022] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 117.731023] CR2: ffffffffffffffd6 CR3: 000000010d5a4000 CR4: 0000000000750ee0
[ 117.731023] PKRU: 55555554
[ 117.731024] Call Trace:
[ 117.731027] drm_dp_dpcd_access+0x72/0x110 [drm_kms_helper]
[ 117.731036] drm_dp_dpcd_read+0xb7/0xf0 [drm_kms_helper]
[ 117.731040] drm_dp_start_crc+0x38/0xb0 [drm_kms_helper]
[ 117.731047] amdgpu_dm_crtc_set_crc_source+0x1ae/0x3e0 [amdgpu]
[ 117.731149] crtc_crc_open+0x174/0x220 [drm]
[ 117.731162] full_proxy_open+0x168/0x1f0
[ 117.731165] ? open_proxy_open+0x100/0x100
BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1546
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
drm_gem_object_put calls release_notify callback to free the mem
structure and unreserve_mem_limit, move it down after the last access
of mem and make it conditional call.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
To silence the following Smatch static checker warning:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_svm.c:2615
svm_range_restore_pages()
warn: missing error code here? 'get_task_mm()' failed. 'r' = '0'
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Certain USB4 docks do not seem to be able to handle disabling
DSC once it has been enabled on an MST stream. This can result
in blank displays.
[How]
As a work around, always enable DSC on docks exhibiting this issue. The
flag to indicate the use of DSC for MST streams on a USB4 dock is set
during detection of the dock and only cleared when the USB4 dock is
disconnected.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
It seems like after a series of plug/unplugs we end up in a situation
where tiled display doesnt support Audio.
[HOW]
The issue seems to be related to when we check streams changed after an
HPD, we should be checking the audio_struct as well to see if any of its
values changed.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Mustapha Ghaddar <mustapha.ghaddar@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
VS and PE requested by repeater should not persist for the sink.
[How]
Clear DPCD lane settings after repeater link training finishes.
Reviewed-by: Wesley Chalmers <wesley.chalmers@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: George Shen <George.Shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
When trying to lightup two 4k60 non-DSC displays behind a branch device
that supports DSC we can't lightup both at once due to bandwidth
limitations - each requires 48 VCPI slots but we only have 63.
[How]
The workaround already exists in the code but is guarded by a CONFIG
that cannot be set by the user and shouldn't need to be.
Check for specific branch device IDs to device whether to enable
the workaround for multiple display scenarios.
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
On aldebaran, RLC also controls GFXCLK. Skip halting RLC during GFX IP suspend
and keep it running till PMFW disables all DPMs.
[ 578.019986] amdgpu 0000:23:00.0: amdgpu: GPU reset begin!
[ 583.245566] amdgpu 0000:23:00.0: amdgpu: Failed to disable smu features.
[ 583.245621] amdgpu 0000:23:00.0: amdgpu: Fail to disable dpm features!
[ 583.245639] [drm:amdgpu_device_ip_suspend_phase2 [amdgpu]] *ERROR* suspend of IP block <smu> failed -62
[ 583.248504] [drm] free PSP TMR buffer
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
There is no base reg offset or ip_version set for SDMA2
and SDMA3 on SIENNA_CICHLID, so add them.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Kevin Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
since vkms support atomic KMS interface
Signed-off-by: Flora Cui <flora.cui@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Acked-by: Alex Deucher <aleander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Signed-off-by: Flora Cui <flora.cui@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
