summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2009-01-05Merge branch 'i2c-next' of git://aeryn.fluff.org.uk/bjdooks/linuxLinus Torvalds2-199/+406
* 'i2c-next' of git://aeryn.fluff.org.uk/bjdooks/linux: i2c-omap: fix type of irq handler function i2c-s3c2410: Change IRQ to be plain integer. i2c-s3c2410: Allow more than one i2c-s3c2410 adapter i2c-s3c2410: Remove default platform data. i2c-s3c2410: Use platform data for gpio configuration i2c-s3c2410: Fixup style problems from checkpatch.pl i2c-omap: Enable I2C wakeups for 34xx i2c-omap: reprogram OCP_SYSCONFIG register after reset i2c-omap: convert 'rev1' flag to generic 'rev' u8 i2c-omap: fix I2C timeouts due to recursive omap_i2c_{un,}idle() i2c-omap: Clean-up i2c-omap i2c-omap: Don't compile in OMAP15xx I2C ISR for non-OMAP15xx builds i2c-omap: Mark init-only functions as __init i2c-omap: Add support for omap34xx i2c-omap: FIFO handling support and broken hw workaround for i2c-omap i2c-omap: Add high-speed support to omap-i2c i2c-omap: Close suspected race between omap_i2c_idle() and omap_i2c_isr() i2c-omap: Do not use interruptible wait call in omap_i2c_xfer_msg Fix up apparently-trivial conflict in drivers/i2c/busses/i2c-s3c2410.c
2009-01-05Merge branch 'for-linus' of ↵Linus Torvalds18-260/+676
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (22 commits) HID: fix error condition propagation in hid-sony driver HID: fix reference count leak hidraw HID: add proper support for pensketch 12x9 tablet HID: don't allow DealExtreme usb-radio be handled by usb hid driver HID: fix default Kconfig setting for TopSpeed driver HID: driver for TopSeed Cyberlink quirky remote HID: make boot protocol drivers depend on EMBEDDED HID: avoid sparse warning in HID_COMPAT_LOAD_DRIVER HID: hiddev cleanup -- handle all error conditions properly HID: force feedback driver for GreenAsia 0x12 PID HID: switch specialized drivers from "default y" to !EMBEDDED HID: set proper dev.parent in hidraw HID: add dynids facility HID: use GFP_KERNEL in hid_alloc_buffers HID: usbhid, use usb_endpoint_xfer_int HID: move usbhid flags to usbhid.h HID: add n-trig digitizer support HID: add phys and name ioctls to hidraw HID: struct device - replace bus_id with dev_name(), dev_set_name() HID: automatically call usbhid_set_leds in usbhid driver ...
2009-01-05igb: fix anoying type mismatch warning on rx/tx queue sizingLinus Torvalds1-2/+2
When using "min()", the types of both sides should match. With the cpu mask changes, the type of num_online_cpus() will now depend on config options. Use "min_t()" with an explicit type instead. And make the rx/tx case look the same too, just for sanity. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds22-1414/+509
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (44 commits) qlge: Fix sparse warnings for tx ring indexes. qlge: Fix sparse warning regarding rx buffer queues. qlge: Fix sparse endian warning in ql_hw_csum_setup(). qlge: Fix sparse endian warning for inbound packet control block flags. qlge: Fix sparse warnings for byte swapping in qlge_ethool.c myri10ge: print MAC and serial number on probe failure pkt_sched: cls_u32: Fix locking in u32_change() iucv: fix cpu hotplug af_iucv: Free iucv path/socket in path_pending callback af_iucv: avoid left over IUCV connections from failing connects af_iucv: New error return codes for connect() net/ehea: bitops work on unsigned longs Revert "net: Fix for initial link state in 2.6.28" tcp: Kill extraneous SPLICE_F_NONBLOCK checks. tcp: don't mask EOF and socket errors on nonblocking splice receive dccp: Integrate the TFRC library with DCCP dccp: Clean up ccid.c after integration of CCID plugins dccp: Lockless integration of CCID congestion-control plugins qeth: get rid of extra argument after printk to dev_* conversion qeth: No large send using EDDP for HiperSockets. ...
2009-01-05Merge branch 'next' of ↵Linus Torvalds1-20/+35
git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] Fix on resume, now preserves user policy min/max. [CPUFREQ] Add Celeron Core support to p4-clockmod. [CPUFREQ] add to speedstep-lib additional fsb values for core processors [CPUFREQ] Disable sysfs ui for p4-clockmod. [CPUFREQ] p4-clockmod: reduce noise [CPUFREQ] clean up speedstep-centrino and reduce cpumask_t usage
2009-01-05Merge branch 'for-linus' of ↵Linus Torvalds7-29/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: inotify: fix type errors in interfaces fix breakage in reiserfs_new_inode() fix the treatment of jfs special inodes vfs: remove duplicate code in get_fs_type() add a vfs_fsync helper sys_execve and sys_uselib do not call into fsnotify zero i_uid/i_gid on inode allocation inode->i_op is never NULL ntfs: don't NULL i_op isofs check for NULL ->i_op in root directory is dead code affs: do not zero ->i_op kill suid bit only for regular files vfs: lseek(fd, 0, SEEK_CUR) race condition
2009-01-05i2o: Update my addressAlan Cox4-4/+4
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-05qlge: Fix sparse warnings for tx ring indexes.Ron Mercer1-10/+10
Warnings: drivers/net/qlge/qlge_main.c:1474:34: warning: restricted degrades to integer drivers/net/qlge/qlge_main.c:1475:36: warning: restricted degrades to integer drivers/net/qlge/qlge_main.c:1592:51: warning: restricted degrades to integer drivers/net/qlge/qlge_main.c:1941:20: warning: incorrect type in assignment (different base types) drivers/net/qlge/qlge_main.c:1941:20: expected restricted unsigned int [usertype] tid drivers/net/qlge/qlge_main.c:1941:20: got int [signed] index drivers/net/qlge/qlge_main.c:1945:24: warning: incorrect type in assignment (different base types) drivers/net/qlge/qlge_main.c:1945:24: expected restricted unsigned int [usertype] txq_idx drivers/net/qlge/qlge_main.c:1945:24: got unsigned int [unsigned] [usertype] tx_ring_idx Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-05qlge: Fix sparse warning regarding rx buffer queues.Ron Mercer2-51/+15
Warnings: drivers/net/qlge/qlge_main.c:909:17: warning: incorrect type in assignment (different base types) drivers/net/qlge/qlge_main.c:909:17: expected unsigned int [unsigned] [usertype] addr_lo drivers/net/qlge/qlge_main.c:909:17: got restricted unsigned int [usertype] <noident> drivers/net/qlge/qlge_main.c:911:17: warning: incorrect type in assignment (different base types) drivers/net/qlge/qlge_main.c:911:17: expected unsigned int [unsigned] [usertype] addr_hi drivers/net/qlge/qlge_main.c:911:17: got restricted unsigned int [usertype] <noident> drivers/net/qlge/qlge_main.c:974:17: warning: incorrect type in assignment (different base types) drivers/net/qlge/qlge_main.c:974:17: expected unsigned int [unsigned] [usertype] addr_lo drivers/net/qlge/qlge_main.c:974:17: got restricted unsigned int [usertype] <noident> drivers/net/qlge/qlge_main.c:975:17: warning: incorrect type in assignment (different base types) drivers/net/qlge/qlge_main.c:975:17: expected unsigned int [unsigned] [usertype] addr_hi drivers/net/qlge/qlge_main.c:975:17: got restricted unsigned int [usertype] <noident> drivers/net/qlge/qlge_main.c:2132:16: warning: incorrect type in assignment (different base types) drivers/net/qlge/qlge_main.c:2132:16: expected unsigned int [unsigned] [usertype] addr_lo drivers/net/qlge/qlge_main.c:2132:16: got restricted unsigned int [usertype] <noident> drivers/net/qlge/qlge_main.c:2133:16: warning: incorrect type in assignment (different base types) drivers/net/qlge/qlge_main.c:2133:16: expected unsigned int [unsigned] [usertype] addr_hi drivers/net/qlge/qlge_main.c:2133:16: got restricted unsigned int [usertype] <noident> drivers/net/qlge/qlge_main.c:2212:15: warning: incorrect type in assignment (different base types) drivers/net/qlge/qlge_main.c:2212:15: expected unsigned int [unsigned] [usertype] addr_lo drivers/net/qlge/qlge_main.c:2212:15: got restricted unsigned int [usertype] <noident> drivers/net/qlge/qlge_main.c:2214:15: warning: incorrect type in assignment (different base types) drivers/net/qlge/qlge_main.c:2214:15: expected unsigned int [unsigned] [usertype] addr_hi drivers/net/qlge/qlge_main.c:2214:15: got restricted unsigned int [usertype] <noident> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-05qlge: Fix sparse endian warning in ql_hw_csum_setup().Ron Mercer1-1/+1
Changed u16 to __sum16 usage. Warnings: drivers/net/qlge/qlge_main.c:1897:9: warning: incorrect type in assignment (different base types) drivers/net/qlge/qlge_main.c:1897:9: expected unsigned short [usertype] *check drivers/net/qlge/qlge_main.c:1897:9: got restricted unsigned short *<noident> drivers/net/qlge/qlge_main.c:1903:9: warning: incorrect type in assignment (different base types) drivers/net/qlge/qlge_main.c:1903:9: expected unsigned short [usertype] *check drivers/net/qlge/qlge_main.c:1903:9: got restricted unsigned short *<noident> drivers/net/qlge/qlge_main.c:1909:9: warning: incorrect type in assignment (different base types) drivers/net/qlge/qlge_main.c:1909:9: expected unsigned short [unsigned] [short] [usertype] <noident> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-05qlge: Fix sparse endian warning for inbound packet control block flags.Ron Mercer2-12/+10
Changed flags element from __le32 to 3 reserved bytes and one byte of flags. Changed flags bit definitions to reflect byte width instead of __le32 width. Warnings: drivers/net/qlge/qlge_main.c:1206:16: warning: restricted degrades to integer drivers/net/qlge/qlge_main.c:1207:16: warning: restricted degrades to integer drivers/net/qlge/qlge_main.c:1233:17: warning: restricted degrades to integer drivers/net/qlge/qlge_main.c:1276:17: warning: restricted degrades to integer drivers/net/qlge/qlge_main.c:1349:19: warning: restricted degrades to integer Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-05qlge: Fix sparse warnings for byte swapping in qlge_ethool.cRon Mercer1-4/+4
drivers/net/qlge/qlge_ethtool.c:59:23: warning: cast to restricted type drivers/net/qlge/qlge_ethtool.c:59:21: warning: incorrect type in assignment (different base types) drivers/net/qlge/qlge_ethtool.c:59:21: expected restricted unsigned short [usertype] irq_delay drivers/net/qlge/qlge_ethtool.c:59:21: got unsigned short [unsigned] [usertype] <noident> drivers/net/qlge/qlge_ethtool.c:61:8: warning: cast to restricted type drivers/net/qlge/qlge_ethtool.c:60:21: warning: incorrect type in assignment (different base types) drivers/net/qlge/qlge_ethtool.c:60:21: expected restricted unsigned short [usertype] pkt_delay drivers/net/qlge/qlge_ethtool.c:60:21: got unsigned short [unsigned] [usertype] <noident> drivers/net/qlge/qlge_ethtool.c:82:23: warning: cast to restricted type drivers/net/qlge/qlge_ethtool.c:82:21: warning: incorrect type in assignment (different base types) drivers/net/qlge/qlge_ethtool.c:82:21: expected restricted unsigned short [usertype] irq_delay drivers/net/qlge/qlge_ethtool.c:82:21: got unsigned short [unsigned] [usertype] <noident> drivers/net/qlge/qlge_ethtool.c:84:8: warning: cast to restricted type drivers/net/qlge/qlge_ethtool.c:83:21: warning: incorrect type in assignment (different base types) drivers/net/qlge/qlge_ethtool.c:83:21: expected restricted unsigned short [usertype] pkt_delay drivers/net/qlge/qlge_ethtool.c:83:21: got unsigned short [unsigned] [usertype] <noident> Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-05myri10ge: print MAC and serial number on probe failureBrice Goglin1-1/+5
To help board identification and diagnosis, print the MAC and serial number on probe failure if they are available. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-05net/ehea: bitops work on unsigned longsStephen Rothwell2-3/+2
The flags field of struct ehea_port is only used with test_bit(), clear_bit() and set_bit() and these interfaces only work on "unsigned long"s, so change the field to be an "unsigned long". Also, this field only has two bits defined for it (0 and 1) so will still be fine if someone builds this driver for a 32 bit arch (at least as far as this flags field is concerned). Also note that ehea_driver_flags is only used in ehca_main.c, so make it static in there. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-05add a vfs_fsync helperChristoph Hellwig1-17/+1
Fsync currently has a fdatawrite/fdatawait pair around the method call, and a mutex_lock/unlock of the inode mutex. All callers of fsync have to duplicate this, but we have a few and most of them don't quite get it right. This patch adds a new vfs_fsync that takes care of this. It's a little more complicated as usual as ->fsync might get a NULL file pointer and just a dentry from nfsd, but otherwise gets afile and we want to take the mapping and file operations from it when it is there. Notes on the fsync callers: - ecryptfs wasn't calling filemap_fdatawrite / filemap_fdatawait on the lower file - coda wasn't calling filemap_fdatawrite / filemap_fdatawait on the host file, and returning 0 when ->fsync was missing - shm wasn't calling either filemap_fdatawrite / filemap_fdatawait nor taking i_mutex. Now given that shared memory doesn't have disk backing not doing anything in fsync seems fine and I left it out of the vfs_fsync conversion for now, but in that case we might just not pass it through to the lower file at all but just call the no-op simple_sync_file directly. [and now actually export vfs_fsync] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-01-05zero i_uid/i_gid on inode allocationAl Viro6-12/+0
... and don't bother in callers. Don't bother with zeroing i_blocks, while we are at it - it's already been zeroed. i_mode is not worth the effort; it has no common default value. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-01-05Merge branch 'i2c-next-s3c' into i2c-nextBen Dooks1-107/+78
2009-01-04qeth: get rid of extra argument after printk to dev_* conversionHeiko Carstens1-1/+1
drivers/s390/net/qeth_l3_main.c: In function 'qeth_l3_setadapter_parms': drivers/s390/net/qeth_l3_main.c:1049: warning: too many arguments for format Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04qeth: No large send using EDDP for HiperSockets.Klaus-Dieter Wacker1-1/+8
From: Klaus-Dieter Wacker <kdwacker@de.ibm.com> The device driver qeth dos not support large send using EDDP for HiperSockets. Signed-off-by: Klaus-Dieter Wacker <kdwacker@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04qeth: do not spin for SETIP ip assist commandFrank Blaschka1-11/+29
The ip assist hw command for setting an IP address last unacceptable long so we can not spin while we waiting for the irq. Since we can ensure process context for all occurrences of this command we can use wait. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04qeth: avoid crash in case of layer mismatch for VSWITCHUrsula Braun3-6/+14
For z/VM GuestLAN or VSWITCH devices the transport layer is configured in z/VM. The layer2 attribute of a participating Linux device has to match the z/VM definition. In case of a mismatch Linux currently crashes in qeth recovery due to a reference to the not yet existing net_device. Solution: add a check for existence of net_device and add a message pointing to the mismatch of layer definitions in Linux and z/VM. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04qeth: exploit source MAC address for inbound layer3 packetsUrsula Braun3-9/+9
OSA-devices operating in layer3 mode offer adding of the source MAC address to the QDIO header of inbound packets. The qeth driver can exploit this functionality to replace FAKELL-entries in the ethernet header of received packets. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04qeth: HiperSockets mcl string conversion (pre z9 mach)Klaus-Dieter Wacker1-1/+2
The pre z9 machines provide an mcl string in EBCDIC format, z9 or later provide string in ASCII format. Signed-off-by: Klaus-Dieter Wacker <kdwacker@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04tun: Eliminate sparse signedness warningGerrit Renker1-1/+1
register_pernet_gen_device() expects 'int*', found via sparse. CHECK drivers/net/tun.c drivers/net/tun.c:1245:36: warning: incorrect type in argument 1 (different signedness) drivers/net/tun.c:1245:36: expected int *id drivers/net/tun.c:1245:36: got unsigned int static [toplevel] *<noident> Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04e100: cosmetic cleanupBruce Allan1-134/+134
Add missing space after if, switch, for and while keywords. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04qlge: bugfix: Fix register access error checking.Ron Mercer1-12/+12
Some indexed registers do not have error bits. In these cases a value of zero should be used for error checking. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04qlge: bugfix: Fix ring length setting for rx ring, large/smallRon Mercer1-4/+9
The length field for these rings is 16-bits. If the length is the max supported 65536 then the setting should be zero. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04qlge: bugfix: Fix shadow register endian issue.Ron Mercer2-22/+7
Shadow registers are consistent memory locations to which the chip echos ring indexes in little endian format. These values need to be endian swapped before referencing. Note: The register pointer declaration uses the volatile modifier which causes warnings in checkpatch. Per Documentation/volatile-considered-harmful.txt: - Pointers to data structures in coherent memory which might be modified by I/O devices can, sometimes, legitimately be volatile. A ring buffer used by a network adapter, where that adapter changes pointers to indicate which descriptors have been processed, is an example of this type of situation. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04qlge: bugfix: Add missing pci_unmap_page call in receive path.Ron Mercer1-0/+5
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04qlge: bugfix: Add missing pci_mapping_err checking.Ron Mercer1-0/+5
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04enc28j60: fix RX buffer overflowBaruch Siach1-1/+3
The enc28j60 driver doesn't check whether the length of the packet as reported by the hardware fits into the preallocated buffer. When stressed, the hardware may report insanely large packets even tough the "Receive OK" bit is set. Fix this. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04isdn: capi: &&/|| typosRoel Kluin1-2/+2
Correct two typos. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Karsten Keil <kkeil@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04starfire: use request_firmware()Jaswinder Singh Rajput3-383/+48
Firmware blob is big endian Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04firmware: convert tg3 driver to request_firmware()Jaswinder Singh Rajput2-698/+98
Firmware blob looks like this... u8 firmware_major u8 firmware_minor u8 firmware_fix u8 pad __be32 start_address __be32 length (total, including BSS sections to be zeroed) data... (in __be32 words, which is native for the firmware) Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04firmware: convert acenic driver to request_firmware()Jaswinder Singh2-46/+75
We store the firmware in its native big-endian form now, so the loop in ace_copy() is modified to use be32_to_cpup() when writing it out. We can forget the BSS,SBSS sections of the firmware, since we were clearing all the device's RAM anyway. And the text,rodata,data sections can all be loaded as a single chunk since they're contiguous (give or take a few dozen bytes in between). Signed-off-by: Jaswinder Singh <jaswinder@infradead.org> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Acked-by: Jes Sorensen <jes@sgi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-04rtc: add alarm/update irq interfacesAlessandro Zummo3-17/+94
Add standard interfaces for alarm/update irqs enabling. Drivers are no more required to implement equivalent ioctl code as rtc-dev will provide it. UIE emulation should now be handled correctly and will work even for those RTC drivers who cannot be configured to do both UIE and AIE. Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Cc: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-04viafb: fix crashes due to 4k stack overflowBruno Prémont1-119/+129
The function viafb_cursor() uses 2 stack-variables of CURSOR_SIZE bits; CURSOR_SIZE is defined as (8 * 1024). Using up twice 1k on stack is too much for 4k-stack (though it works with 8k-stacks). Make those two variables kzalloc'ed to preserve stack space. Also merge the whole lot of local struct's in viafb_ioctl into a union so the stack usage gets minimized here as well. (struct's are only accessed in their indicidual IOCTL case) This second part is only compile-tested as I know of no userspace app using the IOCTLs. Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org> Cc: <JosephChan@via.com.tw> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-04Merge branch 'upstream-fixes' into for-nextJiri Kosina5-2/+10
Conflicts: drivers/hid/hid-ids.h
2009-01-04HID: fix error condition propagation in hid-sony driverJiri Kosina1-1/+1
sony_set_operational() only propagates return value from usb_control_msg(), which returns negative on error and number of transferred bytes otherwise. Reported-by: Marcin Tolysz <tolysz@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04HID: fix reference count leak hidrawOliver Neukum1-1/+1
The hidraw subsystem has a bug that prevents the close syscall from ever reaching the low level driver, leading to a resource leak. Fix by replacing postdecrement with predecrement. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04HID: add proper support for pensketch 12x9 tabletMatt Helsley2-0/+4
The Genius PenSketch 12x9 tablet has a puck (labeled a "Tablet Mouse") in addition to a pen. Without registering a quirk the tablet appears to be a single input device that reports the wrong axis information in /proc/bus/input/devices, and sends incorrect events (e.g. ABS_Z instead of ABS_Y). This information confuses the X evdev driver and makes the device impossible to use. The quirk fixes events and splits the device into multiple input event devices so that at least the puck is useful. Signed-off-by: Matt Helsley <matt.helsley@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04HID: don't allow DealExtreme usb-radio be handled by usb hid driverAlexey Klimov2-0/+4
This device is already handled by radio-si470x driver, and we therefore want usbhid to ignore it. Patch places usb ids of that device in ignore section of hid-core.c Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04HID: fix default Kconfig setting for TopSpeed driverJiri Kosina1-1/+1
Make default setting for TopSpeed driver compliant with the defaults of the other specialized HID drivers. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04HID: driver for TopSeed Cyberlink quirky remoteLev Babiev5-0/+89
I recently picked up a Cyberlink branded remote control produced by TopSeed Tech Corp. Alas, it appears that this device is using non-standard mappings for some of it's keys (Usage page 0xffbc). Signed-off-by: Lev Babiev <harley@hosers.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04HID: make boot protocol drivers depend on EMBEDDEDParag Warudkar1-1/+1
The usbmouse and usbkbd modules are not supposed to be used with regular USB mice and keyboards. Make them depend on EMBEDDED to prevent them from being built and loaded on non-EMBEDDED configs. Signed-off-by: Parag Warudkar <parag.lkml@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04HID: hiddev cleanup -- handle all error conditions properlyOliver Neukum1-36/+99
This is a cleanup of hiddev and fixes the following issues: - thread safety by locking in read & ioctl, introducing a per device mutex - race between ioctl and disconnect, introducing a flag and locking in form of a per low level device mutex - race between open and other methods, making sure only successfully opened devices are put on the list, changing order of events - range checking both upper and lower limits of the minor range - make sure further calls to open fail for unplugged devices even if the device still has opened files - error checking for low level open - possible loss of wakeup events, using standard waiting macros - race in initialisation by moving registration after full initialisation Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04HID: force feedback driver for GreenAsia 0x12 PIDLukasz Lubojanski5-0/+199
I have implemented Force Feedback driver for another "GreeAsia" based device (0e8f:0012 "GreenAsia Inc. USB Joystick"). The functionality was tested with MANTA Warior MM816 and SpeedLink Strike2 SL-6635 and fftest software - everything seems to work right. Signed-off-by: Lukasz Lubojanski <lukasz@lubojanski.info> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04HID: switch specialized drivers from "default y" to !EMBEDDEDDavid Brownell1-17/+17
Fix the obnoxious "default y" for all the "special" HID code, which forces folk with EMBEDDED defined to manually override that inappropriate default for almost 20 choices. The general policy is against "default y"; it should apply here too. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04HID: set proper dev.parent in hidrawJiri Kosina1-1/+1
We need to properly set parent of the hidraw device (which is the corresponding physical device itself) in order to hidraw devices not end up under virtual device tree. Reported-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04HID: add dynids facilityJiri Slaby1-3/+98
Allow adding new devices to the hid drivers on the fly without a need of kernel recompilation. Now, one can test a driver e.g. by: echo 0003:045E:00F0.0003 > ../generic-usb/unbind echo 0003 045E 00F0 > new_id from some driver subdir. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-20 03:45:12 +0000