summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2011-11-26hwmon: convert drivers/hwmon/* to use module_platform_driver()Axel Lin11-130/+11
This patch converts the drivers in drivers/hwmon/* to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Cc: Donggeun Kim <dg77.kim@samsung.com> Cc: Simon Guinot <sguinot@lacie.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Ben Dooks <ben@simtec.co.uk> Cc: Hans de Goede <hdegoede@redhat.com> Cc: J Keerthy <j-keerthy@ti.com> Cc: David S. Miller <davem@davemloft.net> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-11-25hwmon: Remove redundant spi driver bus initializationLars-Peter Clausen2-2/+0
In ancient times it was necessary to manually initialize the bus field of an spi_driver to spi_bus_type. These days this is done in spi_register_driver(), so we can drop the manual assignment. The patch was generated using the following coccinelle semantic patch: // <smpl> @@ identifier _driver; @@ struct spi_driver _driver = { .driver = { - .bus = &spi_bus_type, }, }; // </smpl> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: Jean Delvare <khali@linux-fr.org> Cc: Guenter Roeck <guenter.roeck@ericsson.com> Cc: lm-sensors@lm-sensors.org Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2011-11-23Merge git://github.com/rustyrussell/linuxLinus Torvalds3-2/+20
* git://github.com/rustyrussell/linux: virtio-pci: make reset operation safer virtio-mmio: Correct the name of the guest features selector virtio: add HAS_IOMEM dependency to MMIO platform bus driver
2011-11-24virtio-pci: make reset operation saferMichael S. Tsirkin1-0/+18
virtio pci device reset actually just does an I/O write, which in PCI is really posted, that is it can complete on CPU before the device has received it. Further, interrupts might have been pending on another CPU, so device callback might get invoked after reset. This conflicts with how drivers use reset, which is typically: reset unregister a callback running after reset completed can race with unregister, potentially leading to use after free bugs. Fix by flushing out the write, and flushing pending interrupts. This assumes that device is never reset from its vq/config callbacks, or in parallel with being added/removed, document this assumption. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-11-24virtio-mmio: Correct the name of the guest features selectorSasha Levin1-1/+1
Guest features selector spelling mistake. Cc: Pawel Moll <pawel.moll@arm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: virtualization@lists.linux-foundation.org Signed-off-by: Sasha Levin <levinsasha928@gmail.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-11-24virtio: add HAS_IOMEM dependency to MMIO platform bus driverHeiko Carstens1-1/+1
Fix this compile error on s390: CC [M] drivers/virtio/virtio_mmio.o drivers/virtio/virtio_mmio.c: In function 'vm_get_features': drivers/virtio/virtio_mmio.c:107:2: error: implicit declaration of function 'writel' Cc: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-11-23Merge branch 'upstream-linus' of git://github.com/jgarzik/libata-devLinus Torvalds2-1/+5
* 'upstream-linus' of git://github.com/jgarzik/libata-dev: libata: fix build without BMDMA [libata] ahci_platform: fix DT probing
2011-11-23Merge branch 'for-linus' of ↵Linus Torvalds6-21/+47
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci: PCI hotplug: shpchp: don't blindly claim non-AMD 0x7450 device IDs PCI: pciehp: wait 100 ms after Link Training check PCI: pciehp: wait 1000 ms before Link Training check PCI: pciehp: Retrieve link speed after link is trained PCI: Let PCI_PRI depend on PCI PCI: Fix compile errors with PCI_ATS and !PCI_IOV PCI / ACPI: Make acpiphp ignore root bridges using PCIe native hotplug
2011-11-23Merge branch 'i2c-for-linus' of ↵Linus Torvalds3-4/+6
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c: Make i2cdev_notifier_call static i2c: Delete ANY_I2C_BUS i2c: Fix device name for 10-bit slave address i2c-algo-bit: Generate correct i2c address sequence for 10-bit target
2011-11-23Merge branch 'for-linus' of ↵Linus Torvalds1-6/+8
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: TPS65910: Fix VDD1/2 voltage selector count
2011-11-23Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds20-432/+594
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (31 commits) drm: integer overflow in drm_mode_dirtyfb_ioctl() drivers/gpu/vga/vgaarb.c: add missing kfree drm/radeon/kms/atom: unify i2c gpio table handling drm/radeon/kms: fix up gpio i2c mask bits for r4xx for real ttm: Don't return the bo reserved on error path drm/radeon/kms: add a CS ioctl flag not to rewrite tiling flags in the CS drm/i915: Fix inconsistent backlight level during disabled drm, i915: Fix memory leak in i915_gem_busy_ioctl(). drm/i915: Use DPCD value for max DP lanes. drm/i915: Initiate DP link training only on the lanes we'll be using drm/i915: Remove trailing white space drm/i915: Try harder during dp pattern 1 link training drm/i915: Make DP prepare/commit consistent with DP dpms drm/i915: Let panel power sequencing hardware do its job drm/i915: Treat PCH eDP like DP in most places drm/i915: Remove link_status field from intel_dp structure drm/i915: Move common PCH_PP_CONTROL setup to ironlake_get_pp_control drm/i915: Module parameters using '-1' as default must be signed type drm/i915: Turn on another required clock gating bit on gen6. drm/i915: Turn on a required 3D clock gating bit on Sandybridge. ...
2011-11-23regulator: TPS65910: Fix VDD1/2 voltage selector countAfzal Mohammed1-6/+8
Count of selector voltage is required for regulator_set_voltage to work via set_voltage_sel. VDD1/2 currently have it as zero, so regulator_set_voltage won't work for VDD1/2. Update count (n_voltages) for VDD1/2. Output Voltage = (step value * 12.5 mV + 562.5 mV) * gain With above expr, number of voltages that can be selected is step value count * gain count constant for gain count will be called VDD1_2_NUM_VOLT_COARSE existing constant for step value count is VDD1_2_NUM_VOLTS, use VDD1_2_NUM_VOLT_FINE instead to make clear that step value is not the only component in deciding selectable voltage count Signed-off-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-11-23i2c: Make i2cdev_notifier_call staticShubhrajyoti D1-1/+1
The function i2cdev_notifier_call is used only in i2c-dev file making it static. Also removes the following sparse warning drivers/i2c/i2c-dev.c:582:5: warning: symbol 'i2cdev_notifier_call' was not declared. Should it be static? Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-11-23i2c: Fix device name for 10-bit slave addressJean Delvare1-1/+3
10-bit addresses overlap with traditional 7-bit addresses, leading in device name collisions. Add an arbitrary offset to 10-bit addresses to prevent this collision. The offset was chosen so that the address is still easily recognizable. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Wolfram Sang <w.sang@pengutronix.de>
2011-11-23i2c-algo-bit: Generate correct i2c address sequence for 10-bit targetJeffrey (Sheng-Hui) Chu1-2/+2
The wrong bits were put on the wire, fix that. This fixes kernel bug #42562. Signed-off-by: Sheng-Hui J. Chu <jeffchu@broadcom.com> Cc: stable@kernel.org Signed-off-by: Jean Delvare <khali@linux-fr.org>
2011-11-23drm: integer overflow in drm_mode_dirtyfb_ioctl()Xi Wang1-0/+4
There is a potential integer overflow in drm_mode_dirtyfb_ioctl() if userspace passes in a large num_clips. The call to kmalloc would allocate a small buffer, and the call to fb->funcs->dirty may result in a memory corruption. Reported-by: Haogang Chen <haogangchen@gmail.com> Signed-off-by: Xi Wang <xi.wang@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-22Revert "of/irq: of_irq_find_parent: check for parent equal to child"Linus Torvalds1-7/+7
This reverts commit dc9372808412edbc653a675a526c2ee6c0c14a91. As requested by Ben Herrenschmidt: "This breaks some powerpc platforms at least. The practice of having a node provide an explicit "interrupt-parent" property pointing to itself is an old trick that we've used in the past to allow a device-node to have interrupts routed to different controllers. In that case, the node also contains an interrupt-map, so the node is its own parent, the interrupt resolution hits the map, which then can route each individual interrupt to a different parent." Grant says: "Ah, nuts, yes that is broken then. Yes, please revert the commit and Rob & I will come up with a better solution. Rob, I think it can be done by explicitly checking for np == desc->interrupt_parent in of_irq_init() instead of relying on of_irq_find_parent() returning NULL." Requested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: devicetree-discuss@lists.ozlabs.org Cc: linuxppc-dev <linuxppc-dev@lists.ozlabs.org> Cc: Tanmay Inamdar <tinamdar@apm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-22Merge branch 'for-linus' of ↵Linus Torvalds1-1/+9
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: mount_subtree() pointless use-after-free iio: fix a leak due to improper use of anon_inode_getfd() microblaze: bury asm/namei.h
2011-11-22drivers/gpu/vga/vgaarb.c: add missing kfreeJulia Lawall1-6/+12
kbuf is a buffer that is local to this function, so all of the error paths leaving the function should release it. Signed-off-by: Julia Lawall <julia@diku.dk> Cc: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-22drm/radeon/kms/atom: unify i2c gpio table handlingAlex Deucher1-128/+86
Split the quirks and i2c_rec assignment into separate functions used by both radeon_lookup_i2c_gpio() and radeon_atombios_i2c_init(). This avoids duplicating code and cases where quirks were only added to one of the functions. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-22drm/radeon/kms: fix up gpio i2c mask bits for r4xx for realAlex Deucher1-0/+12
Fixes i2c test failures when i2c_algo_bit.bit_test=1. The hw doesn't actually require a mask, so just set it to the default mask bits for r1xx-r4xx radeon ddc. I missed this part the first time through. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-22ttm: Don't return the bo reserved on error pathThomas Hellstrom1-1/+7
An unlikely race could case a bo to be returned reserved on an error path. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-22Merge branch 'drm-intel-fixes' of git://people.freedesktop.org/~keithp/linux ↵Dave Airlie10-211/+354
into drm-fixes * 'drm-intel-fixes' of git://people.freedesktop.org/~keithp/linux: (25 commits) drm/i915: Fix inconsistent backlight level during disabled drm, i915: Fix memory leak in i915_gem_busy_ioctl(). drm/i915: Use DPCD value for max DP lanes. drm/i915: Initiate DP link training only on the lanes we'll be using drm/i915: Remove trailing white space drm/i915: Try harder during dp pattern 1 link training drm/i915: Make DP prepare/commit consistent with DP dpms drm/i915: Let panel power sequencing hardware do its job drm/i915: Treat PCH eDP like DP in most places drm/i915: Remove link_status field from intel_dp structure drm/i915: Move common PCH_PP_CONTROL setup to ironlake_get_pp_control drm/i915: Module parameters using '-1' as default must be signed type drm/i915: Turn on another required clock gating bit on gen6. drm/i915: Turn on a required 3D clock gating bit on Sandybridge. drm/i915: enable cacheable objects on Ivybridge drm/i915: add constants to size fence arrays and fields drm/i915: Ivybridge still has fences! drm/i915: forcewake warning fixes in debugfs drm/i915: Fix object refcount leak on mmappable size limit error path. drm/i915: Use mode_config.mutex in ironlake_panel_vdd_work ...
2011-11-22Merge branch 'for-linus' of ↵Linus Torvalds3-8/+33
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: ams_delta_serio - include linux/module.h Input: elantech - adjust hw_version detection logic Input: i8042 - add HP Pavilion dv4s to 'notimeout' and 'nomux' blacklists
2011-11-22Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds5-366/+3
* git://www.linux-watchdog.org/linux-watchdog: watchdog: fix initialisation printout in s3c2410_wdt watchdog: Don't overwrite error value in wm831x_wdt_set_timeout() watchdog: adx_wdt.c: remove driver
2011-11-21Merge branch 'staging-linus' of ↵Linus Torvalds3-8/+9
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging * 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: fix more ET131X build errors staging: et131x depends on NET staging: slicoss depends on NET linux-next: et131x: Fix build error when CONFIG_PM_SLEEP not enabled
2011-11-21Merge branch 'usb-linus' of ↵Linus Torvalds42-282/+332
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb * 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (48 commits) USB: Fix Corruption issue in USB ftdi driver ftdi_sio.c USB: option: add PID of Huawei E173s 3G modem OHCI: final fix for NVIDIA problems (I hope) USB: option: release new PID for ZTE 3G modem usb: Netlogic: Fix HC_LENGTH call in ehci-xls.c USB: storage: ene_ub6250: fix compile warnings USB: option: add id for 3G dongle Model VT1000 of Viettel USB: serial: pl2303: rm duplicate id USB: pch_udc: Change company name OKI SEMICONDUCTOR to LAPIS Semiconductor USB: pch_udc: Support new device LAPIS Semiconductor ML7831 IOH usb-storage: Accept 8020i-protocol commands longer than 12 bytes USB: quirks: adding more quirky webcams to avoid squeaky audio powerpc/usb: fix type cast for address of ioremap to compatible with 64-bit USB: at91: at91-ohci: fix set/get power USB: cdc-acm: Fix disconnect() vs close() race USB: add quirk for Logitech C600 web cam USB: EHCI: fix HUB TT scheduling issue with iso transfer USB: XHCI: resume root hubs when the controller resumes USB: workaround for bug in old version of GCC USB: ark3116 initialisation fix ...
2011-11-21Merge branch 'tty-linus' of ↵Linus Torvalds7-43/+52
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty * 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: TTY: ldisc, wait for ldisc infinitely in hangup TTY: ldisc, move wait idle to caller TTY: ldisc, allow waiting for ldisc arbitrarily long Revert "tty/serial: Prevent drop of DCD on suspend for Tegra UARTs" RS485: fix inconsistencies in the meaning of some variables pch_uart: Fix DMA resource leak issue serial,mfd: Fix CMSPAR setup tty/serial: Prevent drop of DCD on suspend for Tegra UARTs pch_uart: Change company name OKI SEMICONDUCTOR to LAPIS Semiconductor pch_uart: Support new device LAPIS Semiconductor ML7831 IOH pch_uart: Fix hw-flow control issue tty: hvc_dcc: Fix duplicate character inputs jsm: Change maintainership
2011-11-21Merge branch 'driver-core-linus' of ↵Linus Torvalds1-6/+8
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core * 'driver-core-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: drivers/base/node.c: fix compilation error with older versions of gcc uio: documentation fixups device.h: Fix struct member documentation
2011-11-21Merge branch 'char-misc-linus' of ↵Linus Torvalds4-31/+69
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc * 'char-misc-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: misc: ad525x_dpot: Fix AD8400 spi transfer size. pch_phub: Fix MAC address writing issue for LAPIS ML7831 pch_phub: Improve ADE(Address Decode Enable) control pch_phub: Change company name OKI SEMICONDUCTOR to LAPIS Semiconductor pch_phub: Support new device LAPIS Semiconductor ML7831 IOH pcie-gadget-spear: Add "platform:" prefix for platform modalias MAINTAINERS: add CHAR and MISC driver maintainers
2011-11-21iio: fix a leak due to improper use of anon_inode_getfd()Al Viro1-1/+9
it can fail and in that case ->release() will *not* be called... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-11-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds48-200/+428
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (86 commits) ipv4: fix redirect handling ping: dont increment ICMP_MIB_INERRORS sky2: fix hang in napi_disable sky2: enforce minimum ring size bonding: Don't allow mode change via sysfs with slaves present f_phonet: fix page offset of first received fragment stmmac: fix pm functions avoiding sleep on spinlock stmmac: remove spin_lock in stmmac_ioctl. stmmac: parameters auto-tuning through HW cap reg stmmac: fix advertising 1000Base capabilties for non GMII iface stmmac: use mdelay on timeout of sw reset sky2: version 1.30 sky2: used fixed RSS key sky2: reduce default Tx ring size sky2: rename up/down functions sky2: pci posting issues sky2: fix hang on shutdown (and other irq issues) r6040: fix check against MCRO_HASHEN bit in r6040_multicast_list MAINTAINERS: change email address for shemminger pch_gbe: Move #include of module.h ...
2011-11-20Merge branch 'fixes' of ↵Linus Torvalds1-0/+8
http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'fixes' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: ARM: wire up process_vm_writev and process_vm_readv syscalls ARM: 7160/1: setup: avoid overflowing {elf,arch}_name from proc_info_list ARM: 7158/1: add new MFP implement for NUC900 ARM: 7157/1: fix a building WARNING for nuc900 ARM: 7156/1: l2x0: fix compile error on !CONFIG_USE_OF ARM: 7155/1: arch.h: Declare 'pt_regs' locally ARM: 7154/1: mach-bcmring: fix build error in dma.c ARM: 7153/1: mach-bcmring: fix build error in core.c ARM: 7152/1: distclean: Remove generated .dtb files ARM: 7150/1: Allow kernel unaligned accesses on ARMv6+ processors ARM: 7149/1: spi/pl022: Enable clock in probe Revert "ARM: 7098/1: kdump: copy kernel relocation code at the kexec prepare stage"
2011-11-20Merge branch 'pm-fixes' of ↵Linus Torvalds6-40/+38
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm * 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / Suspend: Fix bug in suspend statistics update PM / Hibernate: Fix the early termination of test modes PM / shmobile: Fix build of sh7372_pm_init() for CONFIG_PM unset PM Sleep: Do not extend wakeup paths to devices with ignore_children set PM / driver core: disable device's runtime PM during shutdown PM / devfreq: correct Kconfig dependency PM / devfreq: fix use after free in devfreq_remove_device PM / shmobile: Avoid restoring the INTCS state during initialization PM / devfreq: Remove compiler error after irq.h update PM / QoS: Properly use the WARN() macro in dev_pm_qos_add_request() PM / Clocks: Only disable enabled clocks in pm_clk_suspend() ARM: mach-shmobile: sh7372 A3SP no_suspend_console fix PM / shmobile: Don't skip debugging output in pd_power_up()
2011-11-20drm/radeon/kms: add a CS ioctl flag not to rewrite tiling flags in the CSMarek Olšák6-98/+131
This adds a new optional chunk to the CS ioctl that specifies optional flags to the CS parser. Why this is useful is explained below. Note that some regs no longer need the NOP relocation packet if this feature is enabled. Tested on r300g and r600g with this flag disabled and enabled. Assume there are two contexts sharing the same mipmapped tiled texture. One context wants to render into the first mipmap and the other one wants to render into the last mipmap. As you probably know, the hardware has a MACRO_SWITCH feature, which turns off macro tiling for small mipmaps, but that only applies to samplers. (at least on r300-r500, though later hardware likely behaves the same) So we want to just re-set the tiling flags before rendering (writing packets), right? ... No. The contexts run in parallel, so they may set the tiling flags simultaneously and then fire their command streams also simultaneously. The last one setting the flags wins, the other one loses. Another problem is when one context wants to render into the first and the last mipmap in one CS. Impossible. It must flush before changing tiling flags and do the rendering into the smaller mipmaps in another CS. Yet another problem is that writing copy_blit in userspace would be a mess involving re-setting tiling flags to please the kernel, and causing races with other contexts at the same time. The only way out of this is to send tiling flags with each CS, ideally with each relocation. But we already do that through the registers. So let's just use what we have in the registers. Signed-off-by: Marek Olšák <maraeo@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-11-19Merge branch 'hwmon-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (exynos4_tmu) Fix Kconfig dependency [ Merging code in-flight, just because I can. What timezone should I use? - Linus ]
2011-11-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ideLinus Torvalds4-13/+29
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide: cy82c693: fix PCI device selection icside: DMA support fix IDE: Don't powerdown Compaq Triflex IDE device on suspend piix: ICH7 MWDMA1 errata
2011-11-18staging: fix more ET131X build errorsRandy Dunlap1-1/+2
ET131X is a network device, so it should depend on NETDEVICES. (This part won't be needed when the driver moves to drivers/net/.) It also uses PHYLIB interfaces, so it should select PHYLIB. Fixes these build errors: ERROR: "phy_connect" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "phy_find_first" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "mdiobus_register" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "mdiobus_alloc" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "phy_stop" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "phy_start" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "mdiobus_free" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "mdiobus_unregister" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "phy_print_status" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "phy_ethtool_gset" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "phy_ethtool_sset" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "phy_mii_ioctl" [drivers/staging/et131x/et131x.ko] undefined! Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Acked-by: : Mark Einon <mark.einon@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-18staging: et131x depends on NETRandy Dunlap1-1/+1
ET131X uses netdev interfaces so it should depend on NET. Fixes these build errors: ERROR: "ethtool_op_get_link" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "eth_validate_addr" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "register_netdev" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "phy_connect" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "phy_find_first" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "mdiobus_register" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "mdiobus_alloc" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "alloc_etherdev_mqs" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "netif_device_detach" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "phy_stop" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "netif_device_attach" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "phy_start" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "free_netdev" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "mdiobus_free" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "mdiobus_unregister" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "unregister_netdev" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "__netif_schedule" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "phy_print_status" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "dev_kfree_skb_any" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "dev_alloc_skb" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "netif_rx" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "eth_type_trans" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "skb_put" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "phy_ethtool_gset" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "phy_ethtool_sset" [drivers/staging/et131x/et131x.ko] undefined! ERROR: "phy_mii_ioctl" [drivers/staging/et131x/et131x.ko] undefined! Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-18staging: slicoss depends on NETRandy Dunlap1-1/+1
The slicoss driver uses network interfaces so it should depend on NET. Fixes the following build errors: ERROR: "eth_change_mtu" [drivers/staging/slicoss/slicoss.ko] undefined! ERROR: "eth_validate_addr" [drivers/staging/slicoss/slicoss.ko] undefined! ERROR: "register_netdev" [drivers/staging/slicoss/slicoss.ko] undefined! ERROR: "alloc_etherdev_mqs" [drivers/staging/slicoss/slicoss.ko] undefined! ERROR: "__netif_schedule" [drivers/staging/slicoss/slicoss.ko] undefined! ERROR: "netif_rx" [drivers/staging/slicoss/slicoss.ko] undefined! ERROR: "eth_type_trans" [drivers/staging/slicoss/slicoss.ko] undefined! ERROR: "skb_put" [drivers/staging/slicoss/slicoss.ko] undefined! ERROR: "skb_pull" [drivers/staging/slicoss/slicoss.ko] undefined! ERROR: "__alloc_skb" [drivers/staging/slicoss/slicoss.ko] undefined! ERROR: "free_netdev" [drivers/staging/slicoss/slicoss.ko] undefined! ERROR: "unregister_netdev" [drivers/staging/slicoss/slicoss.ko] undefined! ERROR: "consume_skb" [drivers/staging/slicoss/slicoss.ko] undefined! ERROR: "dev_kfree_skb_irq" [drivers/staging/slicoss/slicoss.ko] undefined! Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: Lior Dotan <liodot@gmail.com> Cc: Christopher Harrer <charrer@alacritech.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-18linux-next: et131x: Fix build error when CONFIG_PM_SLEEP not enabledMark Einon1-6/+6
Randy Dunlap reports that the ex131x driver doesn't build when CONFIG_PM_SLEEP is not enabled. This bug was introduced when moving code around to remove some forward declarations earlier, the #endif part of #ifdef CONFIG_PM_SLEEP was not moved at the same time. Now fixed by moving it to its proper place. Reported-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Mark Einon <mark.einon@gmail.com> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-18USB: Fix Corruption issue in USB ftdi driver ftdi_sio.cAndrew Worsley1-3/+11
Fix for ftdi_set_termios() glitching output ftdi_set_termios() is constantly setting the baud rate, data bits and parity unnecessarily on every call, . When called while characters are being transmitted can cause the FTDI chip to corrupt the serial port bit stream output by stalling the output half a bit during the output of a character. Simple fix by skipping this setting if the baud rate/data bits/parity are unchanged. Signed-off-by: Andrew Worsley <amworsley@gmail.com> Cc: stable <stable@vger.kernel.org> ---- I had a brief run with strace on the getty and it was doing ioctl()s on each call but it didn't look relavant to the problem. I think the issue is that XON/XOFF flow control was being implmented via hardware - for the ixoff to allow the user to use XON/XOFF to control output. Unfortunately it would send 3 Control URBs updating all of the settings after each piece of input I am trying to work around the issue of gmail messing with the tab/spacing by submitting via SMTP via gmail which I believe should fix the issue. The patch is against v3.2-rc2 and compiles - but no additional testing in this kernel has been done. Thanks Andrew Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-18USB: option: add PID of Huawei E173s 3G modemFerenc Wagner1-0/+2
Signed-off-by: Ferenc Wagner <wferi@niif.hu> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-18OHCI: final fix for NVIDIA problems (I hope)Alan Stern4-64/+28
Problems with NVIDIA's OHCI host controllers persist. After looking carefully through the spec, I finally realized that when a controller is reset it then automatically goes into a SUSPEND state in which it is completely quiescent (no DMA and no IRQs) and from which it will not awaken until the system puts it into the OPERATIONAL state. Therefore there's no need to worry about controllers being in the RESET state for extended periods, or remaining in the OPERATIONAL state during system shutdown. The proper action for device initialization is to put the controller into the RESET state (if it's not there already) and then to issue a software reset. Similarly, the proper action for device shutdown is simply to do a software reset. This patch (as1499) implements such an approach. It simplifies initialization and shutdown, and allows the NVIDIA shutdown-quirk code to be removed. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Andre "Osku" Schmidt <andre.osku.schmidt@googlemail.com> Tested-by: Arno Augustin <Arno.Augustin@web.de> Cc: stable <stable@vger.kernel.org> [after tested in 3.2 for a while] Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-18USB: option: release new PID for ZTE 3G modemzheng.zhijian@zte.com.cn1-0/+21
This patch adds new PIDs for ZTE 3G modem, after we confirm it and tested. Thanks for Dan's work at kernel option devier. Signed-off-by: Alvin.Zheng <zheng.zhijian@zte.com.cn> Signed-off-by: wsalvin <wsalvin@yahoo.com.cn> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-18usb: Netlogic: Fix HC_LENGTH call in ehci-xls.cJayachandran C1-1/+1
Fix compile error, HC_LENGTH now takes two parameters and ehci needs to be passed as the first parameter. Signed-off-by: Jayachandran C <jayachandranc@netlogicmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-18misc: ad525x_dpot: Fix AD8400 spi transfer size.Michael Hennerich1-1/+1
AD8400 type devices require 16-bit command transfers. Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-18drivers/base/node.c: fix compilation error with older versions of gccClaudio Scordino1-6/+8
Patch to fix the error message "directives may not be used inside a macro argument" which appears when the kernel is compiled for the cris architecture. Signed-off-by: Claudio Scordino <claudio@evidence.eu.com> Acked-by: David Rientjes <rientjes@google.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-18Merge branch 'stable/for-linus-fixes-3.2' of ↵Linus Torvalds4-12/+17
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen * 'stable/for-linus-fixes-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen-gntalloc: signedness bug in add_grefs() xen-gntalloc: integer overflow in gntalloc_ioctl_alloc() xen-gntdev: integer overflow in gntdev_alloc_map() xen:pvhvm: enable PVHVM VCPU placement when using more than 32 CPUs. xen/balloon: Avoid OOM when requesting highmem xen: Remove hanging references to CONFIG_XEN_PLATFORM_PCI xen: map foreign pages for shared rings by updating the PTEs directly
2011-11-18Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds4-16/+39
* 'for-linus' of git://git.kernel.dk/linux-block: block: add missed trace_block_plug paride: fix potential information leak in pg_read() bio: change some signed vars to unsigned block: avoid unnecessary plug list flush cciss: auto engage SCSI mid layer at driver load time loop: cleanup set_status interface include/linux/bio.h: use a static inline function for bio_integrity_clone() loop: prevent information leak after failed read block: Always check length of all iov entries in blk_rq_map_user_iov() The Windows driver .inf disables ASPM on all cciss devices. Do the same. backing-dev: ensure wakeup_timer is deleted block: Revert "[SCSI] genhd: add a new attribute "alias" in gendisk"