summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2010-10-21vlan: Rename VLAN_GROUP_ARRAY_LEN to VLAN_N_VID.Jesse Gross13-15/+15
VLAN_GROUP_ARRAY_LEN is simply the number of possible vlan VIDs. Since vlan groups will soon be more of an implementation detail for vlan devices, rename the constant to be descriptive of its actual purpose. Signed-off-by: Jesse Gross <jesse@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21enic: Fix log messageVasanthy Kolluri1-1/+1
Fix a log message Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21enic: Change min MTUVasanthy Kolluri1-1/+1
Change min MTU to 68. Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21enic: Replace firmware devcmd CMD_ENABLE with CMD_ENABLE_WAITVasanthy Kolluri3-4/+10
Replace no wait CMD_ENABLE firmware devcmd with CMD_ENABLE_WAIT Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21enic: Make firmware cognizant of the user set mac addressVasanthy Kolluri1-1/+12
Let the firmware know about the mac address set by the user using ndo_set_mac_address Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21enic: Add support for multiple hardware receive queuesVasanthy Kolluri5-124/+368
Add support for multiple hardware receive queues. The ingress traffic is hashed into one of the receive queues based on IP or TCP or both headers. The max no. of receive queues supported is 8. Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21ibmveth: Free irq on error pathDenis Kirjanov1-2/+4
Free irq on error path. Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21ibmveth: Cleanup error handling inside ibmveth_openDenis Kirjanov1-24/+20
Remove duplicated code in one place. Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-20Merge branch 'for-davem' of ↵David S. Miller133-6283/+4984
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2010-10-20netpoll: Remove netpoll blocking from uninit pathNeil Horman1-3/+0
Some recent testing in netpoll with bonding showed this backtrace ------------[ cut here ]------------ kernel BUG at drivers/net/bonding/bonding.h:134! invalid opcode: 0000 [#1] SMP last sysfs file: /sys/devices/pci0000:00/0000:00:1d.2/usb7/devnum CPU 0 Pid: 1876, comm: rmmod Not tainted 2.6.36-rc3+ #10 D26928/ RIP: 0010:[<ffffffffa0514ba4>] [<ffffffffa0514ba4>] bond_uninit+0x6f4/0x7a0 RSP: 0018:ffff88003b1b5d58 EFLAGS: 00010296 RAX: ffff88003b9b6200 RBX: ffff8800373e8e00 RCX: 00000000000f4240 RDX: 00000000ffffffff RSI: 0000000000000286 RDI: 0000000000000286 RBP: ffff88003b1b5dc8 R08: 0000000000000000 R09: 00000001af7de920 R10: 0000000000000000 R11: ffff880002495e98 R12: ffff880037922700 R13: ffff880038c31000 R14: ffff880037922730 R15: 0000000000000286 FS: 00007f90e6d72700(0000) GS:ffff880002400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 000000346f0d9ad0 CR3: 000000003b263000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process rmmod (pid: 1876, threadinfo ffff88003b1b4000, task ffff88003b36aa80) Stack: 00000000ffffffff ffff88003b1b5d7a ffff8800379221e8 ffff880037922000 <0> ffff88003b1b5dc8 ffffffff813eb5fb ffff88003b1b5da8 0000000031b177a3 <0> ffff88003b1b5da8 ffff880037922000 ffff88003b1b5e48 ffff88003b1b5e48 Call Trace: [<ffffffff813eb5fb>] ? rtmsg_ifinfo+0xcb/0xf0 [<ffffffff813daad8>] rollback_registered_many+0x168/0x280 [<ffffffff813dac09>] unregister_netdevice_many+0x19/0x80 [<ffffffff813e97b3>] __rtnl_kill_links+0x63/0x90 [<ffffffff813e980b>] __rtnl_link_unregister+0x2b/0x60 [<ffffffff813e9bde>] rtnl_link_unregister+0x1e/0x30 [<ffffffffa052124b>] bonding_exit+0x37/0x51 [bonding] [<ffffffff81098b2e>] sys_delete_module+0x19e/0x270 [<ffffffff810bb2b2>] ? audit_syscall_entry+0x252/0x280 [<ffffffff8100b0b2>] system_call_fastpath+0x16/0x1b RIP [<ffffffffa0514ba4>] bond_uninit+0x6f4/0x7a0 [bonding] RSP <ffff88003b1b5d58> ---[ end trace 1395ad691cea24d1 ]--- It occurs because of my recent netpoll blocking patches, which I added to avoid recursive deadlock in the bonding driver. It relies on some per cpu bits, but the shutdown path forces some rescheduling as we cancel workqueues for the driver and wait for some device refcounts. If after the forced reschedule, we wind up on a different cpu we trigger the bughalt in unblock_netpoll_tx. The fix is to remove the netpoll block/unblock calls from bond_release_all. This is safe to do because bond_uninit, which is called via ndo_uninit in rollback_registered_many, doesn't occur until we send a NETDEV_UNREGISTER event, which triggers netconsole to remove us as a netpoll client, so we are guaranteed not to recurse into our own tx path here. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Reviewed-by: WANG Cong <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-19bnx2x: update version to 1.60.00-3Dmitry Kravkov1-2/+2
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-19bnx2x: prevent false parity error in MSI-X memory of HC blockVladislav Zolotarov2-2/+32
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-19bnx2x: fix possible deadlock in HC hw blockDmitry Kravkov1-8/+29
The possible deadlock (on 57710 devices only) will prevent from the device to generate interrupts. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-193c52x: remove IRQF_SAMPLE_RANDOM from legacy MCA drivers.Paul Gortmaker2-2/+2
If you are genuinely using one of these legacy MCA drivers then you are tragically on hardware where you really don't have the extra CPU cycles to be wasting on this. In addition, it makes two less cases for people to inadvertently blindly copy flags from without explicitly thinking whether it makes sense -- see the addition to feature-removal.txt as per commit 9d9b8fb0e5ebf4b0398e579f6061d4451fea3242. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-18bonding: Re-enable netpoll over bondingNeil Horman1-19/+10
With the inclusion of previous fixup patches, netpoll over bonding apears to work reliably with failover conditions. This reverts Gospos previous commit c22d7ac844f1cb9c6a5fd20f89ebadc2feef891b, and allows access again to the netpoll functionality in the bonding driver. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-18bonding: Fix netconsole to not deadlock on rmmodNeil Horman1-1/+8
Netconsole calls netpoll_cleanup on receipt of a NETDEVICE_UNREGISTER event. The notifier subsystem calls these event handlers with rtnl_lock held, which netpoll_cleanup also takes, resulting in deadlock. Fix this by calling the __netpoll_cleanup interior function instead, and fixing up the additional pointers. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-18bonding: Fix deadlock in bonding driver resulting from internal locking when ↵Neil Horman3-4/+80
using netpoll The monitoring paths in the bonding driver take write locks that are shared by the tx path. If netconsole is in use, these paths can call printk which puts us in the netpoll tx path, which, if netconsole is attached to the bonding driver, result in deadlock (the xmit_lock guards are useless in netpoll_send_skb, as the monitor paths in the bonding driver don't claim the xmit_lock, nor should they). The solution is to use a per cpu flag internal to the driver to indicate when a cpu is holding the lock in a path that might recusrse into the tx path for the driver via netconsole. By checking this flag on transmit, we can defer the sending of the netconsole frames until a later time using the retransmit feature of netpoll_send_skb that is triggered on the return code NETDEV_TX_BUSY. I've tested this and am able to transmit via netconsole while causing failover conditions on the bond slave links. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-18bonding: Fix bonding drivers improper modification of netpoll structureNeil Horman1-6/+9
The bonding driver currently modifies the netpoll structure in its xmit path while sending frames from netpoll. This is racy, as other cpus can access the netpoll structure in parallel. Since the bonding driver points np->dev to a slave device, other cpus can inadvertently attempt to send data directly to slave devices, leading to improper locking with the bonding master, lost frames, and deadlocks. This patch fixes that up. This patch also removes the real_dev pointer from the netpoll structure as that data is really only used by bonding in the poll_controller, and we can emulate its behavior by check each slave for IS_UP. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-18e1000e: Fix for offline diag test failure at first callCarolyn Wyborny1-11/+8
Move link test call to later in the offline sequence, move the restore settings block to afterwards and add another reset to ensure the hardware is in a known state afterwards. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Acked-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-18igbvf: Remove unneeded pm_qos* callsGreg Rose1-5/+0
Power Management Quality of Service is not supported or used by the VF driver. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-18igb: fix stats handlingEric Dumazet3-45/+129
There are currently some problems with igb. - On 32bit arches, maintaining 64bit counters without proper synchronization between writers and readers. - Stats updated every two seconds, as reported by Jesper. (Jesper provided a patch for this) - Potential problem between worker thread and ethtool -S This patch uses u64_stats_sync, and convert everything to be 64bit safe, SMP safe, even on 32bit arches. It integrates Jesper idea of providing accurate stats at the time user reads them. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Tested-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-18netxen: mask correctable erroramit salecha2-2/+28
HW workaround: Disable logging of correctable error for some NX3031 based adapter. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-18netxen: fix race in tx stop queueRajesh Borundia4-18/+22
There is race between netif_stop_queue and netif_stopped_queue check.So check once again if buffers are available to avoid race. With above logic we can also get rid of tx lock in process_cmd_ring. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-18qlcnic: update ethtool statsamit salecha1-3/+70
Added statistics for Nic Partition supported adapter. These statistics are maintined in device. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-18Merge branch 'can/mcp251x-for-net-next' of ↵David S. Miller1-25/+70
git://git.pengutronix.de/git/mkl/linux-2.6
2010-10-18bnx2x: update version to 1.60.00-2Dmitry Kravkov1-2/+2
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-18bnx2x: remove unnecessary FUNC_FLG_RSS flag and relatedDmitry Kravkov2-49/+34
As suggested by: Joe Perches <joe@perches.com> Although RSS is meaningless when there is a single HW queue we still need it enabled in order to have HW Rx hash generated. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-18bnx2x: Use correct FW constant for header paddingDmitry Kravkov2-3/+1
the value of the constant is the same, but it's clearer to use original constant provided by HSI Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-18bnx2x: do not deal with power if no capabilityDmitry Kravkov1-0/+6
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-18bnx2x: remove redundant commands during error handlingDmitry Kravkov1-2/+0
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-18bnx2x: Optimized the branching in the bnx2x_rx_int()Vladislav Zolotarov1-5/+6
Optimized the branching in the bnx2x_rx_int() based on the fact that FP CQE will always have at least one of START or STOP flags set, so if not both bits are set and START bit is not set, then it's a STOP bit that is set. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-18can: mcp251x: optimize 2515, rx int gets cleared automaticallyMarc Kleine-Budde1-4/+9
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Wolfgang Grandegger <wg@grandegger.com>
2010-10-18can: mcp251x: define helper functions mcp251x_is_2510, mcp251x_is_2515Marc Kleine-Budde1-2/+12
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Wolfgang Grandegger <wg@grandegger.com>
2010-10-18can: mcp251x: Don't use pdata->model for chip selection anymoreMarc Kleine-Budde1-12/+12
Since commit e446630c960946b5c1762e4eadb618becef599e7, i.e. v2.6.35-rc1, the mcp251x chip model can be selected via the modalias member in the struct spi_board_info. The driver stores the actual model in the struct mcp251x_platform_data. From the driver point of view the platform_data should be read only. Since all in-tree users of the mcp251x have already been converted to the modalias method, this patch moves the "model" member from the struct mcp251x_platform_data to the driver's private data structure. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Christian Pellegrin <chripell@fsfe.org> Cc: Marc Zyngier <maz@misterjones.org>
2010-10-18can: mcp251x: write intf only when neededMarc Kleine-Budde1-2/+13
This patch introduces a variable "clear_intf" that hold the bits that should be cleared. Only read-modify-write register if "clear_intf" is set. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Wolfgang Grandegger <wg@grandegger.com>
2010-10-18can: mcp251x: read-modify-write eflag only when neededSascha Hauer1-1/+2
Use read-modify-write instead of a simple write to change the register contents, to close existing the race window between the original manual read and write. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Wolfgang Grandegger <wg@grandegger.com>
2010-10-18can: mcp251x: allow to read two registers in one spi transferSascha Hauer1-3/+17
This patch bases on work done earlier by David Jander. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: David Jander <david@protonic.nl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Wolfgang Grandegger <wg@grandegger.com>
2010-10-18can: mcp251x: increase rx_errors on overflow, not only rx_over_errorsSascha Hauer1-2/+6
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Wolfgang Grandegger <wg@grandegger.com>
2010-10-18can: mcp251x: fix NOHZ local_softirq_pending 08 warningMarc Kleine-Budde1-2/+2
This patch replaces netif_rx() with netif_rx_ni() which has to be used from the threaded interrupt i.e. process context context. Thanks to Christian Pellegrin for pointing at the right fix: 481a8199142c050b72bff8a1956a49fd0a75bbe0 by Oliver Hartkopp. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Wolfgang Grandegger <wg@grandegger.com>
2010-10-18ns83820: spin_lock_irq() => spin_lock()Dan Carpenter1-1/+1
This is essentially cosmetic. At this point the IRQs are already disabled because we called spin_lock_irq(&dev->rx_info.lock). The real bug here was fixed back in 2006 in 3a10ccebe: "[PATCH] lock validator: fix ns83820.c irq-flags bug". Prior to that patch, it was a "spin_lock_irq is not nestable" type bug. The 2006 patch changes the unlock to not re-enable IRQs, which eliminates the potential deadlock. But this bit was missed. We should change the lock function as well so it balances nicely. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-17tg3: Update version to 3.115Matt Carlson1-2/+2
This patch updates the tg3 version to 3.115. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-17tg3: Report invalid link from tg3_get_settings()Matt Carlson1-0/+3
Currently the tg3 driver leaves the speed and duplex fields uninitialized in tg3_get_settings() if the device is not up. This can lead to some strange deductions in certain versions of ethtool. When the device is up and the link is down, the driver reports SPEED_INVALID and DUPLEX_INVALID for these fields. This patch makes the presentation consistent by returning SPEED_INVALID and DUPLEX_INVALID when the device has not been brought up as well. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-17tg3: Don't allocate jumbo ring for 5780 class devsMatt Carlson1-4/+7
The 5714, 5715, and 5780 devices do not have a separate rx jumbo producer ring. This patch changes the code so that resources are not allocated for it. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-17tg3: Cleanup tg3_alloc_rx_skb()Matt Carlson1-2/+1
src_map is no longer used in tg3_alloc_rx_skb(). Remove it. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-17tg3: Add EEE supportMatt Carlson2-1/+146
This patch adds Energy Efficient Ethernet (EEE) support for the 5718 device ID and the 57765 B0 asic revision. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-17tg3: Add clause 45 register accessor methodsMatt Carlson2-0/+50
This patch adds clause 45 register access methods. They will be used in the following patch. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-17tg3: Disable unused transmit ringsMatt Carlson1-0/+3
This patch allows the driver to disable the additional transmit rings available on the 5717 and 5719 devices. This is not strictly necessary, but is done anyways for correctness. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-17tg3: Add support for selfboot format 1 v6Matt Carlson2-0/+5
5718 B0 and 5719 devices will use a new selfboot firmware format. This patch adds code to detect the new format so that bootcode versions get reported correctly. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-17drivers/net/pch_gbe: Use DEFINE_PCI_DEVICE_TABLEJoe Perches1-1/+1
Use the standard macro to put this table in __devinitconst. Compiled, untested. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-17stmmac: remove ifdef NETIF_F_TSO from stmmac_ethtool.cGiuseppe Cavallaro1-2/+0
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reported-by: Armando Visconti <armando.visconti@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-21 09:31:13 +0000