summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2011-11-01Merge branch 'for-linus' of git://opensource.wolfsonmicro.com/regulatorLinus Torvalds12-41/+604
* 'for-linus' of git://opensource.wolfsonmicro.com/regulator: (22 commits) regulator: Constify constraints name regulator: Fix possible nullpointer dereference in regulator_enable() regulator: gpio-regulator add dependency on GENERIC_GPIO regulator: Add module.h include to gpio-regulator regulator: Add driver for gpio-controlled regulators regulator: remove duplicate REG_CTRL2 defines in tps65023 regulator: Clarify documentation for regulator-regulator supplies regulator: Fix some bitrot in the machine driver documentation regulator: tps65023: Added support for the similiar TPS65020 chip regulator: tps65023: Setting correct core regulator for tps65021 regulator: tps65023: Set missing bit for update core-voltage regulator: tps65023: Fixes i2c configuration issues regulator: Add debugfs file showing the supply map table regulator: tps6586x: add SMx slew rate setting regulator: tps65023: Fixes i2c configuration issues regulator: tps6507x: Remove num_voltages array regulator: max8952: removed unused mutex. regulator: fix regulator/consumer.h kernel-doc warning regulator: Ensure enough enable time for max8649 regulator: 88pm8607: Fix off-by-one value range checking in the case of no id is matched ...
2011-11-01Merge branch 'for-linus' of ↵Linus Torvalds4-172/+362
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: ohci: fix isochronous DMA synchronization firewire: ohci: work around selfID junk due to wrong gap count firewire: net: Use posted writes firewire: use clamp and min3 macros firewire: ohci: optimize TSB41BA3D detection firewire: ohci: TSB41BA3D support tweaks firewire: ohci: Add support for TSB41BA3D phy firewire: ohci: Move code from the bus reset tasklet into a workqueue firewire: sbp2: fold two functions into one firewire: sbp2: move some code to more sensible places firewire: sbp2: remove obsolete reference counting
2011-11-01Merge branch 'pstore' of ↵Linus Torvalds2-14/+17
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux * 'pstore' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: pstore: make pstore write function return normal success/fail value pstore: change mutex locking to spin_locks pstore: defer inserting OOPS entries into pstore
2011-11-01Merge branch 'for-linus' of ↵Linus Torvalds77-975/+4566
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (62 commits) mlx4_core: Deprecate log_num_vlan module param IB/mlx4: Don't set VLAN in IBoE WQEs' control segment IB/mlx4: Enable 4K mtu for IBoE RDMA/cxgb4: Mark QP in error before disabling the queue in firmware RDMA/cxgb4: Serialize calls to CQ's comp_handler RDMA/cxgb3: Serialize calls to CQ's comp_handler IB/qib: Fix issue with link states and QSFP cables IB/mlx4: Configure extended active speeds mlx4_core: Add extended port capabilities support IB/qib: Hold links until tuning data is available IB/qib: Clean up checkpatch issue IB/qib: Remove s_lock around header validation IB/qib: Precompute timeout jiffies to optimize latency IB/qib: Use RCU for qpn lookup IB/qib: Eliminate divide/mod in converting idx to egr buf pointer IB/qib: Decode path MTU optimization IB/qib: Optimize RC/UC code by IB operation IPoIB: Use the right function to do DMA unmap pages RDMA/cxgb4: Use correct QID in insert_recv_cqe() RDMA/cxgb4: Make sure flush CQ entries are collected on connection close ...
2011-11-01Merge branches 'amso1100', 'cma', 'cxgb3', 'cxgb4', 'fdr', 'ipath', 'ipoib', ↵Roland Dreier76-971/+4565
'misc', 'mlx4', 'misc', 'nes', 'qib' and 'xrc' into for-next
2011-11-01Merge git://github.com/herbertx/cryptoLinus Torvalds6-80/+76
* git://github.com/herbertx/crypto: (48 commits) crypto: user - Depend on NET instead of selecting it crypto: user - Add dependency on NET crypto: talitos - handle descriptor not found in error path crypto: user - Initialise match in crypto_alg_match crypto: testmgr - add twofish tests crypto: testmgr - add blowfish test-vectors crypto: Make hifn_795x build depend on !ARCH_DMA_ADDR_T_64BIT crypto: twofish-x86_64-3way - fix ctr blocksize to 1 crypto: blowfish-x86_64 - fix ctr blocksize to 1 crypto: whirlpool - count rounds from 0 crypto: Add userspace report for compress type algorithms crypto: Add userspace report for cipher type algorithms crypto: Add userspace report for rng type algorithms crypto: Add userspace report for pcompress type algorithms crypto: Add userspace report for nivaead type algorithms crypto: Add userspace report for aead type algorithms crypto: Add userspace report for givcipher type algorithms crypto: Add userspace report for ablkcipher type algorithms crypto: Add userspace report for blkcipher type algorithms crypto: Add userspace report for ahash type algorithms ...
2011-10-31Merge branch 'akpm' (Andrew's incoming)Linus Torvalds36-368/+738
Quoth Andrew: - Most of MM. Still waiting for the poweroc guys to get off their butts and review some threaded hugepages patches. - alpha - vfs bits - drivers/misc - a few core kerenl tweaks - printk() features - MAINTAINERS updates - backlight merge - leds merge - various lib/ updates - checkpatch updates * akpm: (127 commits) epoll: fix spurious lockdep warnings checkpatch: add a --strict check for utf-8 in commit logs kernel.h/checkpatch: mark strict_strto<foo> and simple_strto<foo> as obsolete llist-return-whether-list-is-empty-before-adding-in-llist_add-fix wireless: at76c50x: follow rename pack_hex_byte to hex_byte_pack fat: follow rename pack_hex_byte() to hex_byte_pack() security: follow rename pack_hex_byte() to hex_byte_pack() kgdb: follow rename pack_hex_byte() to hex_byte_pack() lib: rename pack_hex_byte() to hex_byte_pack() lib/string.c: fix strim() semantics for strings that have only blanks lib/idr.c: fix comment for ida_get_new_above() lib/percpu_counter.c: enclose hotplug only variables in hotplug ifdef lib/bitmap.c: quiet sparse noise about address space lib/spinlock_debug.c: print owner on spinlock lockup lib/kstrtox: common code between kstrto*() and simple_strto*() functions drivers/leds/leds-lp5521.c: check if reset is successful leds: turn the blink_timer off before starting to blink leds: save the delay values after a successful call to blink_set() drivers/leds/leds-gpio.c: use gpio_get_value_cansleep() when initializing drivers/leds/leds-lm3530.c: add __devexit_p where needed ...
2011-10-31wireless: at76c50x: follow rename pack_hex_byte to hex_byte_packAndy Shevchenko1-1/+1
There is no functional change. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31drivers/leds/leds-lp5521.c: check if reset is successfulSrinidhi KASAGAR1-0/+18
Make sure that the reset is successful by issuing a dummy read to R channel current register and check its default value. On some platforms, without this dummy read, any further access to {R/G/B}_EXEC will not have any impact. [akpm@linux-foundation.org: fix up code comment] Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com> Tested-by: Naga Radhesh <naga.radheshy@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Richard Purdie <richard.purdie@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31leds: turn the blink_timer off before starting to blinkAntonio Ospite1-0/+2
Depending on the implementation of the hardware blinking function in blink_set(), the led can support hardware blinking for some values of delay_on and delay_off and fall-back to software blinking for some other values. Turning off the blink_timer unconditionally before starting to blink make sure that a sequence like: OFF hardware blinking software blinking hardware blinking does not leave the software blinking timer active. Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: <stable@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31leds: save the delay values after a successful call to blink_set()Antonio Ospite1-1/+4
When calling the hardware blinking function implemented by blink_set(), the delay_on and delay_off values are not preserved across calls. Fix that and make the "timer" trigger work as expected when hardware blinking is available. BEFORE the fix: $ cd /sys/class/leds/someled $ echo timer > trigger $ cat delay_on delay_off 0 0 $ echo 100 > delay_on $ cat delay_on delay_off 0 0 $ echo 100 > delay_off $ cat delay_on delay_off 0 0 AFTER the fix: $ cd /sys/class/leds/someled $ echo timer > trigger $ cat delay_on delay_off 0 0 $ echo 100 > delay_on $ cat delay_on delay_off 100 0 $ echo 100 > delay_off $ cat delay_on delay_off 100 100 Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: <stable@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31drivers/leds/leds-gpio.c: use gpio_get_value_cansleep() when initializingDavid Daney1-1/+1
I get the following warning: ------------[ cut here ]------------ WARNING: at drivers/gpio/gpiolib.c:1559 __gpio_get_value+0x90/0x98() Modules linked in: Call Trace: [<ffffffff81440950>] dump_stack+0x8/0x34 [<ffffffff81141478>] warn_slowpath_common+0x78/0xa0 [<ffffffff812f0958>] __gpio_get_value+0x90/0x98 [<ffffffff81434f04>] create_gpio_led+0xdc/0x194 [<ffffffff8143524c>] gpio_led_probe+0x290/0x36c [<ffffffff8130e8b0>] driver_probe_device+0x78/0x1b0 [<ffffffff8130eaa8>] __driver_attach+0xc0/0xc8 [<ffffffff8130d7ac>] bus_for_each_dev+0x64/0xb0 [<ffffffff8130e130>] bus_add_driver+0x1c8/0x2a8 [<ffffffff8130f100>] driver_register+0x90/0x180 [<ffffffff81100438>] do_one_initcall+0x38/0x160 ---[ end trace ee38723fbefcd65c ]--- My GPIOs are on an I2C port expander, so we must use the *_cansleep() variant of the GPIO functions. This is was not being done in create_gpio_led(). We can change gpio_get_value() to gpio_get_value_cansleep() because it is only called from the platform_driver probe function, which is a context where we can sleep. Only tested on my gpio_cansleep() system, but it seems safe for all systems. Signed-off-by: David Daney <david.daney@cavium.com> Cc: Richard Purdie <rpurdie@rpsys.net> Acked-by: Trent Piepho <tpiepho@gmail.com> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31drivers/leds/leds-lm3530.c: add __devexit_p where neededAxel Lin1-1/+1
According to the comments in include/linux/init.h: "Pointers to __devexit functions must use __devexit_p(function_name), the wrapper will insert either the function_name or NULL, depending on the config options." We have __devexit annotation for lm3530_remove(), so add __devexit_p to the `struct i2c_driver'. Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Shreshtha Kumar SAHU <shreshthakumar.sahu@stericsson.com> Cc: Richard Purdie <rpurdie@rpsys.net> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31drivers/leds/leds-lp5521.c: avoid writing uninitialized value to ↵Axel Lin1-3/+3
LP5521_REG_OP_MODE register If lp5521_read fails, engine_state variable is not initialized. If lp5521_read fails, we should return error. This patch fixes below warning. CC drivers/leds/leds-lp5521.o drivers/leds/leds-lp5521.c: In function 'lp5521_set_engine_mode': drivers/leds/leds-lp5521.c:168: warning: 'engine_state' may be used uninitialized in this function [akpm@linux-foundation.org: remove unneeded "ret |="] Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Samu Onkalo <samu.p.onkalo@nokia.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31drivers/leds/leds-renesas-tpu.c: move Renesas TPU LED driver platform dataMagnus Damm1-1/+1
Use the platform_data include directory for the TPU LED driver, as suggested by Paul Mundt. Signed-off-by: Magnus Damm <damm@opensource.se> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31drivers/leds/leds-renesas-tpu.c: update driver to use workqueueMagnus Damm1-4/+17
Use a workqueue in the Renesas TPU LED driver to allow the Runtime PM code to sleep. Signed-off-by: Magnus Damm <damm@opensource.se> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31drivers/leds/leds-lm3530.c: remove obsolete cleanup for clientdataWolfram Sang1-1/+0
A few new i2c-drivers came into the kernel which clear the clientdata-pointer on exit or error. This is obsolete meanwhile, the core will do it. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Richard Purdie <rpurdie@rpsys.net> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31drivers/leds/led-triggers.c: fix memory leakMasakazu Mokuno1-1/+4
The memory for struct led_trigger should be kfreed in the led_trigger_register() error path. Also this function should return NULL on error. Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31leds: Renesas TPU LED driverMagnus Damm3-0/+357
Add V2 of the LED driver for a single timer channel for the TPU hardware block commonly found in Renesas SoCs. The driver has been written with optimal Power Management in mind, so to save power the LED is driven as a regular GPIO pin in case of maximum brightness and power off which allows the TPU hardware to be idle and which in turn allows the clocks to be stopped and the power domain to be turned off transparently. Any other brightness level requires use of the TPU hardware in PWM mode. TPU hardware device clocks and power are managed through Runtime PM. System suspend and resume is known to be working - during suspend the LED is set to off by the generic LED code. The TPU hardware timer is equipeed with a 16-bit counter together with an up-to-divide-by-64 prescaler which makes the hardware suitable for brightness control. Hardware blink is unsupported. The LED PWM waveform has been verified with a Fluke 123 Scope meter on a sh7372 Mackerel board. Tested with experimental sh7372 A3SP power domain patches. Platform device bind/unbind tested ok. V2 has been tested on the DS2 LED of the sh73a0-based AG5EVM. [axel.lin@gmail.com: include linux/module.h] Signed-off-by: Magnus Damm <damm@opensource.se> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31backlight: rename corgibl_limit_intensity() to genericbl_limit_intensity()Axel Lin1-2/+2
The rename of corgibl_limit_intensity is missed in commit d00ba726 ("backlight: Rename the corgi backlight driver to generic"). Let's fix it now. Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31drivers/video/backlight/l4f00242t03.c: use gpio_request_one() to simplify ↵Fabio Estevam1-11/+4
error handling Using gpio_request_one can make the error handling simpler. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31backlight: fix broken regulator API usage in l4f00242t03Mark Brown1-37/+20
The regulator support in the l4f00242t03 is very non-idiomatic. Rather than requesting the regulators based on the device name and the supply names used by the device the driver requires boards to pass system specific supply names around through platform data. The driver also conditionally requests the regulators based on this platform data, adding unneeded conditional code to the driver. Fix this by removing the platform data and converting to the standard idiom, also updating all in tree users of the driver. As no datasheet appears to be available for the LCD I'm guessing the names for the supplies based on the existing users and I've no ability to do anything more than compile test. The use of regulator_set_voltage() in the driver is also problematic, since fixed voltages are required the expectation would be that the voltages would be fixed in the constraints set by the machines rather than manually configured by the driver, but is less problematic. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31video/backlight: remove obsolete cleanup for clientdataWolfram Sang1-2/+0
A few new i2c-drivers came into the kernel which clear the clientdata-pointer on exit or error. This is obsolete meanwhile, the core will do it. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Paul Mundt <lethal@linux-sh.org> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31treewide: use __printf not __attribute__((format(printf,...)))Joe Perches12-34/+29
Standardize the style for compiler based printf format verification. Standardized the location of __printf too. Done via script and a little typing. $ grep -rPl --include=*.[ch] -w "__attribute__" * | \ grep -vP "^(tools|scripts|include/linux/compiler-gcc.h)" | \ xargs perl -n -i -e 'local $/; while (<>) { s/\b__attribute__\s*\(\s*\(\s*format\s*\(\s*printf\s*,\s*(.+)\s*,\s*(.+)\s*\)\s*\)\s*\)/__printf($1, $2)/g ; print; }' [akpm@linux-foundation.org: revert arch bits] Signed-off-by: Joe Perches <joe@perches.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31drivers/misc/ad525x_dpot-i2c.c: add i2c support for AD5161Peter Korsgaard1-0/+1
Commit 6c536e4ce8e ("ad525x_dpot: add support for SPI parts") added support for the AD5161 through SPI, but the device supports both I2C and SPI (depending on the DIS pin), so add it to -i2c as well. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31driver/misc/fsa9480.c fix potential null-pointer dereferenceJonghwan Choi1-1/+2
Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com> Cc: Donggeun Kim <dg77.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31lis3lv02d: make regulator API usage unconditionalMark Brown1-22/+12
The regulator API contains a range of features for stubbing itself out when not in use and for transparently restricting the actual effect of regulator API calls where they can't be supported on a particular system so that drivers don't need to individually implement this. Simplify the driver slightly by making use of this idiom. The only in tree user is ecovec24 which does not use the regulator API. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Éric Piel <eric.piel@tremplin-utc.net> Cc: Ilkka Koskinen <ilkka.koskinen@nokia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31lis3: remove the references to the global variable in core driverÉric Piel2-103/+133
[ilkka.koskinen@nokia.com: fix arg to lis3->read()] Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net> Cc: Matthew Garrett <mjg@redhat.com> Cc: Witold Pilat <witold.pilat@gmail.com> Cc: Lyall Pearce <lyall.pearce@hp.com> Cc: Malte Starostik <m-starostik@versanet.de> Cc: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Cc: Christian Lamparter <chunkeey@googlemail.com> Subject: lis3-remove-the-references-to-the-global-variable-in-core-driver-fix Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31lis3: change exported function to use passed parameterÉric Piel5-9/+9
Change exported functions to use the device given as parameter instead of the global one. Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net> Cc: Matthew Garrett <mjg@redhat.com> Cc: Witold Pilat <witold.pilat@gmail.com> Cc: Lyall Pearce <lyall.pearce@hp.com> Cc: Malte Starostik <m-starostik@versanet.de> Cc: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Cc: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31lis3: use consistent naming of variablesÉric Piel1-60/+60
Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net> Cc: Matthew Garrett <mjg@redhat.com> Cc: Witold Pilat <witold.pilat@gmail.com> Cc: Lyall Pearce <lyall.pearce@hp.com> Cc: Malte Starostik <m-starostik@versanet.de> Cc: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Cc: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31lis3: free regulators if probe() failsÉric Piel1-2/+7
Signed-off-by: Ilkka Koskinen <ilkka.koskinen@nokia.com> Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net> Cc: Matthew Garrett <mjg@redhat.com> Cc: Witold Pilat <witold.pilat@gmail.com> Cc: Lyall Pearce <lyall.pearce@hp.com> Cc: Malte Starostik <m-starostik@versanet.de> Cc: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Cc: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31hp_accel: add HP ProBook 655xÉric Piel1-0/+1
Add axis correction for HP ProBook 6555b. Signed-off-by: Malte Starostik <m-starostik@versanet.de> Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net> Cc: Matthew Garrett <mjg@redhat.com> Cc: Witold Pilat <witold.pilat@gmail.com> Cc: Lyall Pearce <lyall.pearce@hp.com> Cc: Ilkka Koskinen <ilkka.koskinen@nokia.com> Cc: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Cc: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31lis3: add support for HP EliteBook 8540wÉric Piel1-0/+1
Add axis correction for HP EliteBook 8540w. Reported-by: Lyall Pearce <lyall.pearce@hp.com> Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net> Cc: Matthew Garrett <mjg@redhat.com> Cc: Witold Pilat <witold.pilat@gmail.com> Cc: Malte Starostik <m-starostik@versanet.de> Cc: Ilkka Koskinen <ilkka.koskinen@nokia.com> Cc: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Cc: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31lis3: add support for HP EliteBook 2730pÉric Piel1-0/+1
Add axis correction for HP EliteBook 2730p. Tested-by: Witold Pilat <witold.pilat@gmail.com> Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net> Cc: Matthew Garrett <mjg@redhat.com> Cc: Lyall Pearce <lyall.pearce@hp.com> Cc: Malte Starostik <m-starostik@versanet.de> Cc: Ilkka Koskinen <ilkka.koskinen@nokia.com> Cc: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Cc: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31lis3lv02d: avoid divide by zero due to uncheckedÉric Piel3-9/+32
After an "unexpected" reboot, I found this Oops in my logs: divide error: 0000 [#1] PREEMPT SMP=20 CPU 0=20 Modules linked in: lis3lv02d hp_wmi input_polldev [...] Pid: 390, comm: modprobe Tainted: G C 2.6.39-rc7-wl+=20 RIP: 0010:[<ffffffffa014b427>] [<ffffffffa014b427>] lis3lv02d_poweron+0x4e/0x94 [lis3lv02d] RSP: 0018:ffff8801d6407cf8 EFLAGS: 00010246 RAX: 0000000000000bb8 RBX: ffffffffa014e000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffea00066e4708 RDI: ffff8801df002700 RBP: ffff8801d6407d18 R08: ffffea00066c5a30 R09: ffffffff812498c9 R10: ffff8801d7bfcea0 R11: ffff8801d7bfce10 R12: 0000000000000bb8 R13: 00000000ffffffda R14: ffffffffa0154120 R15: ffffffffa0154030 =46S: 00007fc0705db700(0000) GS:ffff8801dfa00000(0000) knlGS:0 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007f33549174f0 CR3: 00000001d65c9000 CR4: 00000000000406f0 Process modprobe (pid: 390, threadinfo ffff8801d6406000, task ffff8801d6b40= 000) Stack: ffffffffa0154120 62ffffffa0154030 ffffffffa014e000 00000000ffffffea ffff8801d6407d58 ffffffffa014bcc1 0000000000000000 0000000000000048 ffff8801d8bae800 00000000ffffffea 00000000ffffffda ffffffffa0154120 Call Trace: [<ffffffffa014bcc1>] lis3lv02d_init_device+0x1ce/0x496 [lis3lv02d] [<ffffffffa01522ff>] lis3lv02d_add+0x10f/0x17c [hp_accel] [<ffffffff81233e11>] acpi_device_probe+0x49/0x117 [...] Code: 3a 75 06 80 4d ef 50 eb 04 80 4d ef 40 0f b6 55 ef be 21 00 00 00 48 89 df ff 53 18 44 8b 63 6c e8 3e fc ff ff 89 c1 44 89 e0 99 <f7> f9 89 c7 e8 93 82 ef e0 48 83 7b 30 00 74 2d 45 31 e4 80 7b=20 RIP [<ffffffffa014b427>] lis3lv02d_poweron+0x4e/0x94 [lis3lv02d] RSP <ffff8801d6407cf8> >From my POV, it looks like the hardware is not working as expected and returns a bogus data rate. The driver doesn't check the result and directly uses it as some sort of divisor in some places: msleep(lis3->pwron_delay / lis3lv02d_get_odr()); Under this circumstances, this could very well cause the "divide by zero" exception from above. For now, I fixed it the easiest and most obvious way: Check if the result is sane and if it isn't use a sane default instead. I went for "100" in the latter case, simply because /sys/devices/platform/lis3lv02d/rate returns it on a successful boot. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net> Cc: Matthew Garrett <mjg@redhat.com> Cc: Witold Pilat <witold.pilat@gmail.com> Cc: Lyall Pearce <lyall.pearce@hp.com> Cc: Malte Starostik <m-starostik@versanet.de> Cc: Ilkka Koskinen <ilkka.koskinen@nokia.com> Cc: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Cc: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31drivers/hwmon/hwmon.c: convert idr to ida and use ida_simple_get()Jonathan Cameron1-39/+8
A straightforward looking use of idr for a device id. Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Tejun Heo <tj@kernel.org> Cc: Guenter Roeck <guenter.roeck@ericsson.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Acked-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31hwmon: convert idr to ida and use ida_simple interfaceJonathan Cameron1-24/+8
hwmon was using an idr with a NULL pointer, so convert to an ida which then allows use of Rusty's ida_simple_get. Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Tejun Heo <tj@kernel.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: David Airlie <airlied@linux.ie> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Evgeniy Polyakov <zbr@ioremap.net> Cc: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31mm: distinguish between mlocked and pinned pagesChristoph Lameter3-8/+8
Some kernel components pin user space memory (infiniband and perf) (by increasing the page count) and account that memory as "mlocked". The difference between mlocking and pinning is: A. mlocked pages are marked with PG_mlocked and are exempt from swapping. Page migration may move them around though. They are kept on a special LRU list. B. Pinned pages cannot be moved because something needs to directly access physical memory. They may not be on any LRU list. I recently saw an mlockalled process where mm->locked_vm became bigger than the virtual size of the process (!) because some memory was accounted for twice: Once when the page was mlocked and once when the Infiniband layer increased the refcount because it needt to pin the RDMA memory. This patch introduces a separate counter for pinned pages and accounts them seperately. Signed-off-by: Christoph Lameter <cl@linux.com> Cc: Mike Marciniszyn <infinipath@qlogic.com> Cc: Roland Dreier <roland@kernel.org> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds31-350/+395
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: (54 commits) [S390] Remove error checking from copy_oldmem_page() [S390] qdio: prevent dsci access without adapter interrupts [S390] irqstats: split IPI interrupt accounting [S390] add missing __tlb_flush_global() for !CONFIG_SMP [S390] sparse: fix sparse symbol shadow warning [S390] sparse: fix sparse NULL pointer warnings [S390] sparse: fix sparse warnings with __user pointers [S390] sparse: fix sparse warnings in math-emu [S390] sparse: fix sparse warnings about missing prototypes [S390] sparse: fix sparse ANSI-C warnings [S390] sparse: fix sparse static warnings [S390] sparse: fix access past end of array warnings [S390] dasd: prevent path verification before resume [S390] qdio: remove multicast polling [S390] qdio: reset outbound SBAL error states [S390] qdio: EQBS retry after CCQ 96 [S390] qdio: add timestamp for last queue scan time [S390] Introduce get_clock_fast() [S390] kvm: Handle diagnose 0x10 (release pages) [S390] take mmap_sem when walking guest page table ...
2011-10-31Merge branch 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86Linus Torvalds14-599/+1395
* 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86: (45 commits) acer-wmi: replaced the hard coded bitmap by the communication devices bitmap from SMBIOS acer-wmi: check the existence of internal wireless device when set capability acer-wmi: add ACER_WMID_v2 interface flag to represent new notebooks sony-laptop:irq: Remove IRQF_DISABLED asus-laptop: Add rfkill support for Pegatron Lucid tablet asus-laptop: pega_accel - Report accelerometer orientation change through udev asus-laptop: fix module description asus-laptop: hide leds on Pegatron Lucid asus-laptop: Pegatron Lucid accelerometer asus-laptop: allow boot time control of Pegatron ALS sensor Platform: samsung_laptop: add support for X520 machines. platform: samsung_laptop: add dmi information for Samsung R700 laptops hp_accel: Add axis-mapping for HP ProBook / EliteBook hp_accel: Add a new PNP id WMI: properly cleanup devices to avoid crashes ideapad: remove sysfs node for cfg ideapad: add debugfs support ideapad: add event for Novo key ideapad: change parameter of ideapad_sync_rfk_state ideapad: define vpc commands ...
2011-10-31Merge branch 'v4l_for_linus' of ↵Linus Torvalds389-6428/+27349
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (348 commits) [media] pctv452e: Remove bogus code [media] adv7175: Make use of media bus pixel codes [media] media: vb2: fix incorrect return value [media] em28xx: implement VIDIOC_ENUM_FRAMESIZES [media] cx23885: Stop the risc video fifo before reconfiguring it [media] cx23885: Avoid incorrect error handling and reporting [media] cx23885: Avoid stopping the risc engine during buffer timeout [media] cx23885: Removed a spurious function cx23885_set_scale() [media] cx23885: v4l2 api compliance, set the audioset field correctly [media] cx23885: hook the audio selection functions into the main driver [media] cx23885: add generic functions for dealing with audio input selection [media] cx23885: fixes related to maximum number of inputs and range checking [media] cx23885: Initial support for the MPX-885 mini-card [media] cx25840: Ensure AUDIO6 and AUDIO7 trigger line-in baseband use [media] cx23885: Enable audio line in support from the back panel [media] cx23885: Allow the audio mux config to be specified on a per input basis [media] cx25840: Enable support for non-tuner LR1/LR2 audio inputs [media] cx23885: Name an internal i2c part and declare a bitfield by name [media] cx23885: Ensure VBI buffers timeout quickly - bugfix for vbi hangs during streaming [media] cx23885: remove channel dump diagnostics when a vbi buffer times out ... Fix up trivial conflicts in drivers/misc/altera-stapl/altera.c (header file rename vs add)
2011-10-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds23-488/+539
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (27 commits) vlan: allow nested vlan_do_receive() ipv6: fix route lookup in addrconf_prefix_rcv() bonding: eliminate bond_close race conditions qlcnic: fix beacon and LED test. qlcnic: Updated License file qlcnic: updated reset sequence qlcnic: reset loopback mode if promiscous mode setting fails. qlcnic: skip IDC ack check in fw reset path. i825xx: Fix incorrect dependency for BVME6000_NET ipv6: fix route error binding peer in func icmp6_dst_alloc ipv6: fix error propagation in ip6_ufo_append_data() stmmac: update normal descriptor structure (v2) stmmac: fix NULL pointer dereference in capabilities fixup (v2) stmmac: fix a bug while checking the HW cap reg (v2) be2net: Changing MAC Address of a VF was broken. be2net: Refactored be_cmds.c file. bnx2x: update driver version to 1.70.30-0 bnx2x: use FW 7.0.29.0 bnx2x: Enable changing speed when port type is PORT_DA bnx2x: Fix 54618se LED behavior ...
2011-10-31Merge branch 'for-linus' of git://neil.brown.name/mdLinus Torvalds1-1/+1
* 'for-linus' of git://neil.brown.name/md: md/raid10: Fix bug when activating a hot-spare.
2011-10-31mlx4_core: Deprecate log_num_vlan module paramOr Gerlitz1-5/+6
Enable the maximum size (128) supported by the device for the shadow vlans table, ignoring the module parameter that overrides it. This table is only used by the IBoE control plane for setting a vlan index into an RC/UC QP context or UD Address Handle. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-31IB/mlx4: Don't set VLAN in IBoE WQEs' control segmentOr Gerlitz1-9/+2
There's no need to set the vlan-related fields in an IBoE send WQE control segment: - the vlan to be used by a UD QP is set in the datagram segment. - for GSI (CM) QP, all the headers down to 8021q and MAC are built by the software anyway. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-31IB/mlx4: Enable 4K mtu for IBoEOr Gerlitz1-1/+1
The IBoE port MTU is derived from the corresponding Ethernet netdevice MTU, which can support jumbo frames of 9K, and hence surely supports the max IB mtu of 4K. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-31RDMA/cxgb4: Mark QP in error before disabling the queue in firmwareTom Tucker1-0/+4
QPs need to be moved to error before telling the firwmare to shutdown the queue. Otherwise, the application can submit WRs that will never get fetched by the hardware and never flushed by the driver. Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Acked-by: Steve Wise <swsie@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-31RDMA/cxgb4: Serialize calls to CQ's comp_handlerKumar Sanghvi4-4/+23
Commit 01e7da6ba53c ("RDMA/cxgb4: Make sure flush CQ entries are collected on connection close") introduced a potential problem where a CQ's comp_handler can get called simultaneously from different places in the iw_cxgb4 driver. This does not comply with Documentation/infiniband/core_locking.txt, which states that at a given point of time, there should be only one callback per CQ should be active. This problem was reported by Parav Pandit <Parav.Pandit@Emulex.Com>. Based on discussion between Parav Pandit and Steve Wise, this patch fixes the above problem by serializing the calls to a CQ's comp_handler using a spin_lock. Reported-by: Parav Pandit <Parav.Pandit@Emulex.Com> Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-31RDMA/cxgb3: Serialize calls to CQ's comp_handlerKumar Sanghvi4-2/+20
iw_cxgb3 has a potential problem where a CQ's comp_handler can get called simultaneously from different places in iw_cxgb3 driver. This does not comply with Documentation/infiniband/core_locking.txt, which states that at a given point of time, there should be only one callback per CQ should be active. Such problem was reported by Parav Pandit <Parav.Pandit@Emulex.Com> for iw_cxgb4 driver. Based on discussion between Parav Pandit and Steve Wise, this patch fixes the above problem by serializing the calls to a CQ's comp_handler using a spin_lock. Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-31IB/qib: Fix issue with link states and QSFP cablesMitko Haralanov2-10/+21
Fix an issue where the link would come up after replugging a cable even if it has been DISABLED manually. Signed-off-by: Mitko Haralanov <mitko@qlogic.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-19 15:16:07 +0000