summaryrefslogtreecommitdiff
path: root/drivers/vdpa
AgeCommit message (Collapse)AuthorFilesLines
2022-01-18Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds10-145/+350
Pull virtio updates from Michael Tsirkin: "virtio,vdpa,qemu_fw_cfg: features, cleanups, and fixes. - partial support for < MAX_ORDER - 1 granularity for virtio-mem - driver_override for vdpa - sysfs ABI documentation for vdpa - multiqueue config support for mlx5 vdpa - and misc fixes, cleanups" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (42 commits) vdpa/mlx5: Fix tracking of current number of VQs vdpa/mlx5: Fix is_index_valid() to refer to features vdpa: Protect vdpa reset with cf_mutex vdpa: Avoid taking cf_mutex lock on get status vdpa/vdpa_sim_net: Report max device capabilities vdpa: Use BIT_ULL for bit operations vdpa/vdpa_sim: Configure max supported virtqueues vdpa/mlx5: Report max device capabilities vdpa: Support reporting max device capabilities vdpa/mlx5: Restore cur_num_vqs in case of failure in change_num_qps() vdpa: Add support for returning device configuration information vdpa/mlx5: Support configuring max data virtqueue vdpa/mlx5: Fix config_attr_mask assignment vdpa: Allow to configure max data virtqueues vdpa: Read device configuration only if FEATURES_OK vdpa: Sync calls set/get config/status with cf_mutex vdpa/mlx5: Distribute RX virtqueues in RQT object vdpa: Provide interface to read driver features vdpa: clean up get_config_size ret value handling virtio_ring: mark ring unused on error ...
2022-01-14vdpa/mlx5: Fix tracking of current number of VQsEli Cohen1-4/+8
Modify the code such that ndev->cur_num_vqs better reflects the actual number of data virtqueues. The value can be accurately realized after features have been negotiated. This is to prevent possible failures when modifying the RQT object if the cur_num_vqs bears invalid value. No issue was actually encountered but this also makes the code more readable. Fixes: c5a5cd3d3217 ("vdpa/mlx5: Support configuring max data virtqueue") Signed-off-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20220111183400.38418-5-elic@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Si-Wei Liu<si-wei.liu@oracle.com> Acked-by: Jason Wang <jasowang@redhat.com>
2022-01-14vdpa/mlx5: Fix is_index_valid() to refer to featuresEli Cohen1-3/+7
Make sure the decision whether an index received through a callback is valid or not consults the negotiated features. The motivation for this was due to a case encountered where I shut down the VM. After the reset operation was called features were already clear, I got get_vq_state() call which caused out array bounds access since is_index_valid() reported the index value. So this is more of not hit a bug since the call shouldn't have been made first place. Signed-off-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20220111183400.38418-4-elic@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Si-Wei Liu<si-wei.liu@oracle.com> Acked-by: Jason Wang <jasowang@redhat.com>
2022-01-14vdpa: Avoid taking cf_mutex lock on get statusEli Cohen1-11/+0
Avoid the wrapper holding cf_mutex since it is not protecting anything. To avoid confusion and unnecessary overhead incurred by it, remove. Fixes: f489f27bc0ab ("vdpa: Sync calls set/get config/status with cf_mutex") Signed-off-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20220111183400.38418-2-elic@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Si-Wei Liu<si-wei.liu@oracle.com> Acked-by: Jason Wang <jasowang@redhat.com>
2022-01-14vdpa/vdpa_sim_net: Report max device capabilitiesEli Cohen1-0/+1
Configure max supported virtqueues features on the management device. This info can be retrieved using: $ vdpa mgmtdev show vdpasim_net: supported_classes net max_supported_vqs 2 dev_features MAC ANY_LAYOUT VERSION_1 ACCESS_PLATFORM Signed-off-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20220105114646.577224-15-elic@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2022-01-14vdpa: Use BIT_ULL for bit operationsEli Cohen1-6/+6
All masks in this file are 64 bits. Change BIT to BIT_ULL. Other occurences use (1 << val) which yields a 32 bit value. Change them to use BIT_ULL too. Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com> Signed-off-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20220105114646.577224-14-elic@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2022-01-14vdpa/vdpa_sim: Configure max supported virtqueuesEli Cohen1-0/+1
Configure max supported virtqueues on the management device. Signed-off-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20220105114646.577224-13-elic@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2022-01-14vdpa/mlx5: Report max device capabilitiesEli Cohen1-12/+23
Configure max supported virtqueues and features on the management device. This info can be retrieved using: $ vdpa mgmtdev show auxiliary/mlx5_core.sf.1: supported_classes net max_supported_vqs 257 dev_features CSUM GUEST_CSUM MTU HOST_TSO4 HOST_TSO6 STATUS CTRL_VQ MQ \ CTRL_MAC_ADDR VERSION_1 ACCESS_PLATFORM Signed-off-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20220105114646.577224-12-elic@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Si-Wei Liu<si-wei.liu@oracle.com>
2022-01-14vdpa: Support reporting max device capabilitiesEli Cohen1-0/+10
Add max_supported_vqs and supported_features fields to struct vdpa_mgmt_dev. Upstream drivers need to feel these values according to the device capabilities. These values are reported back in a netlink message when showing management devices. Examples: $ auxiliary/mlx5_core.sf.1: supported_classes net max_supported_vqs 257 dev_features CSUM GUEST_CSUM MTU HOST_TSO4 HOST_TSO6 STATUS CTRL_VQ MQ \ CTRL_MAC_ADDR VERSION_1 ACCESS_PLATFORM $ vdpa -j mgmtdev show {"mgmtdev":{"auxiliary/mlx5_core.sf.1":{"supported_classes":["net"], \ "max_supported_vqs":257,"dev_features":["CSUM","GUEST_CSUM","MTU", \ "HOST_TSO4","HOST_TSO6","STATUS","CTRL_VQ","MQ","CTRL_MAC_ADDR", \ "VERSION_1","ACCESS_PLATFORM"]}}} $ vdpa -jp mgmtdev show { "mgmtdev": { "auxiliary/mlx5_core.sf.1": { "supported_classes": [ "net" ], "max_supported_vqs": 257, "dev_features": ["CSUM","GUEST_CSUM","MTU","HOST_TSO4", \ "HOST_TSO6","STATUS","CTRL_VQ","MQ", \ "CTRL_MAC_ADDR","VERSION_1","ACCESS_PLATFORM"] } } } Signed-off-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20220105114646.577224-11-elic@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Si-Wei Liu<si-wei.liu@oracle.com>
2022-01-14vdpa/mlx5: Restore cur_num_vqs in case of failure in change_num_qps()Eli Cohen1-1/+3
Restore ndev->cur_num_vqs to the original value in case change_num_qps() fails. Fixes: 52893733f2c5 ("vdpa/mlx5: Add multiqueue support") Reviewed-by: Si-Wei Liu<si-wei.liu@oracle.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20220105114646.577224-10-elic@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-01-14vdpa: Add support for returning device configuration informationEli Cohen1-0/+3
Add netlink attribute to store the negotiated features. This can be used by userspace to get the current state of the vdpa instance. Examples: $ vdpa dev config show vdpa-a vdpa-a: mac 00:00:00:00:88:88 link up link_announce false max_vq_pairs 16 mtu 1500 negotiated_features CSUM GUEST_CSUM MTU MAC HOST_TSO4 HOST_TSO6 STATUS \ CTRL_VQ MQ CTRL_MAC_ADDR VERSION_1 ACCESS_PLATFORM $ vdpa -j dev config show vdpa-a {"config":{"vdpa-a":{"mac":"00:00:00:00:88:88","link ":"up","link_announce":false, \ "max_vq_pairs":16,"mtu":1500,"negotiated_features":["CSUM","GUEST_CSUM","MTU","MAC", \ "HOST_TSO4","HOST_TSO6","STATUS","CTRL_VQ","MQ","CTRL_MAC_ADDR","VERSION_1", \ "ACCESS_PLATFORM"]}}} $ vdpa -jp dev config show vdpa-a { "config": { "vdpa-a": { "mac": "00:00:00:00:88:88", "link ": "up", "link_announce ": false, "max_vq_pairs": 16, "mtu": 1500, "negotiated_features": [ "CSUM","GUEST_CSUM","MTU","MAC","HOST_TSO4","HOST_TSO6","STATUS","CTRL_VQ","MQ", \ "CTRL_MAC_ADDR","VERSION_1","ACCESS_PLATFORM" ] } } } Signed-off-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20220105114646.577224-9-elic@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2022-01-14vdpa/mlx5: Support configuring max data virtqueueEli Cohen1-14/+40
Check whether the max number of data virtqueue pairs was provided when a adding a new device and verify the new value does not exceed device capabilities. In addition, change the arrays holding virtqueue and callback contexts to be dynamically allocated. Signed-off-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20220105114646.577224-8-elic@nvidia.com Includes fixup: vdpa/mlx5: fix error handling in mlx5_vdpa_dev_add() Clang build fails with mlx5_vnet.c:2574:6: error: variable 'mvdev' is used uninitialized whenever 'if' condition is true if (!ndev->vqs || !ndev->event_cbs) { ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ mlx5_vnet.c:2660:14: note: uninitialized use occurs here put_device(&mvdev->vdev.dev); ^~~~~ This because mvdev is set after trying to allocate ndev->vqs,event_cbs. So move the allocation to after mvdev is set but before the arrays are used in init_mvqs() Signed-off-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20220107211352.3940570-1-trix@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Includes fixup: vdpa/mlx5: fix endian-ness for max vqs sparse warnings: (new ones prefixed by >>) >> drivers/vdpa/mlx5/net/mlx5_vnet.c:1247:23: sparse: sparse: cast to restricted __le16 >> drivers/vdpa/mlx5/net/mlx5_vnet.c:1247:23: sparse: sparse: cast from restricted __virtio16 > 1247 num = le16_to_cpu(ndev->config.max_virtqueue_pairs); Address this using the appropriate wrapper. Cc: "Eli Cohen" <elic@nvidia.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Eli Cohen <elic@nvidia.com>
2022-01-14vdpa/mlx5: Fix config_attr_mask assignmentEli Cohen1-1/+1
Fix VDPA_ATTR_DEV_NET_CFG_MACADDR assignment to be explicit 64 bit assignment. No issue was seen since the value is well below 64 bit max value. Nevertheless it needs to be fixed. Fixes: a007d940040c ("vdpa/mlx5: Support configuration of MAC") Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20220105114646.577224-7-elic@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-01-14vdpa: Allow to configure max data virtqueuesEli Cohen1-2/+13
Add netlink support to configure the max virtqueue pairs for a device. At least one pair is required. The maximum is dictated by the device. Example: $ vdpa dev add name vdpa-a mgmtdev auxiliary/mlx5_core.sf.1 max_vqp 4 Signed-off-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20220105114646.577224-6-elic@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-01-14vdpa: Read device configuration only if FEATURES_OKEli Cohen1-12/+33
Avoid reading device configuration during feature negotiation. Read device status and verify that VIRTIO_CONFIG_S_FEATURES_OK is set. Protect the entire operation, including configuration read with cf_mutex to ensure integrity of the results. Signed-off-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20220105114646.577224-5-elic@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2022-01-14vdpa: Sync calls set/get config/status with cf_mutexEli Cohen1-0/+19
Add wrappers to get/set status and protect these operations with cf_mutex to serialize these operations with respect to get/set config operations. Signed-off-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20220105114646.577224-4-elic@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-01-14vdpa/mlx5: Distribute RX virtqueues in RQT objectEli Cohen1-23/+7
Distribute the available rx virtqueues amongst the available RQT entries. RQTs require to have a power of two entries. When creating or modifying the RQT, use the lowest number of power of two entries that is not less than the number of rx virtqueues. Distribute them in the available entries such that some virtqueus may be referenced twice. This allows to configure any number of virtqueue pairs when multiqueue is used. Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20220105114646.577224-3-elic@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-01-14vdpa: Provide interface to read driver featuresEli Cohen7-27/+76
Provide an interface to read the negotiated features. This is needed when building the netlink message in vdpa_dev_net_config_fill(). Also fix the implementation of vdpa_dev_net_config_fill() to use the negotiated features instead of the device features. To make APIs clearer, make the following name changes to struct vdpa_config_ops so they better describe their operations: get_features -> get_device_features set_features -> set_driver_features Finally, add get_driver_features to return the negotiated features and add implementation to all the upstream drivers. Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20220105114646.577224-2-elic@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-01-14vdpa/mlx5: Fix wrong configuration of virtio_version_1_0Eli Cohen1-2/+0
Remove overriding of virtio_version_1_0 which forced the virtqueue object to version 1. Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices") Signed-off-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20211230142024.142979-1-elic@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
2022-01-14eni_vdpa: Simplify 'eni_vdpa_probe()'Christophe JAILLET1-12/+0
When 'pcim_enable_device()' is used, some resources become automagically managed. There is no need to call 'pci_free_irq_vectors()' when the driver is removed. The same will already be done by 'pcim_release()'. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/02045bdcbbb25f79bae4827f66029cfcddc90381.1636301587.git.christophe.jaillet@wanadoo.fr Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2022-01-14net/mlx5_vdpa: Offer VIRTIO_NET_F_MTU when setting MTUEli Cohen1-0/+1
Make sure to offer VIRTIO_NET_F_MTU since we configure the MTU based on what was queried from the device. This allows the virtio driver to allocate large enough buffers based on the reported MTU. Signed-off-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20211124170949.51725-1-elic@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
2022-01-14vdpa: add driver_override supportStefano Garzarella1-0/+74
`driver_override` allows to control which of the vDPA bus drivers binds to a vDPA device. If `driver_override` is not set, the previous behaviour is followed: devices use the first vDPA bus driver loaded (unless auto binding is disabled). Tested on Fedora 34 with driverctl(8): $ modprobe virtio-vdpa $ modprobe vhost-vdpa $ modprobe vdpa-sim-net $ vdpa dev add mgmtdev vdpasim_net name dev1 # dev1 is attached to the first vDPA bus driver loaded $ driverctl -b vdpa list-devices dev1 virtio_vdpa $ driverctl -b vdpa set-override dev1 vhost_vdpa $ driverctl -b vdpa list-devices dev1 vhost_vdpa [*] Note: driverctl(8) integrates with udev so the binding is preserved. Suggested-by: Jason Wang <jasowang@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20211126164753.181829-3-sgarzare@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-01-14ifcvf/vDPA: fix misuse virtio-net device config size for blk devZhu Lingshan3-33/+41
This commit fixes a misuse of virtio-net device config size issue for virtio-block devices. A new member config_size in struct ifcvf_hw is introduced and would be initialized through vdpa_dev_add() to record correct device config size. To be more generic, rename ifcvf_hw.net_config to ifcvf_hw.dev_config, the helpers ifcvf_read/write_net_config() to ifcvf_read/write_dev_config() Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com> Reported-and-suggested-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Fixes: 6ad31d162a4e ("vDPA/ifcvf: enable Intel C5000X-PL virtio-block for vDPA") Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211201081255.60187-1-lingshan.zhu@intel.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-01-14vduse: moving kvfree into callerGuanjun1-1/+2
This free action should be moved into caller 'vduse_ioctl' in concert with the allocation. No functional change. Signed-off-by: Guanjun <guanjun@linux.alibaba.com> Link: https://lore.kernel.org/r/1638780498-55571-1-git-send-email-guanjun@linux.alibaba.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-01-12Merge tag 'iommu-updates-v5.17' of ↵Linus Torvalds1-8/+0
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu updates from Joerg Roedel: - Identity domain support for virtio-iommu - Move flush queue code into iommu-dma - Some fixes for AMD IOMMU suspend/resume support when x2apic is used - Arm SMMU Updates from Will Deacon: - Revert evtq and priq back to their former sizes - Return early on short-descriptor page-table allocation failure - Fix page fault reporting for Adreno GPU on SMMUv2 - Make SMMUv3 MMU notifier ops 'const' - Numerous new compatible strings for Qualcomm SMMUv2 implementations - Various smaller fixes and cleanups * tag 'iommu-updates-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (38 commits) iommu/iova: Temporarily include dma-mapping.h from iova.h iommu: Move flush queue data into iommu_dma_cookie iommu/iova: Move flush queue code to iommu-dma iommu/iova: Consolidate flush queue code iommu/vt-d: Use put_pages_list iommu/amd: Use put_pages_list iommu/amd: Simplify pagetable freeing iommu/iova: Squash flush_cb abstraction iommu/iova: Squash entry_dtor abstraction iommu/iova: Fix race between FQ timeout and teardown iommu/amd: Fix typo in *glues … together* in comment iommu/vt-d: Remove unused dma_to_mm_pfn function iommu/vt-d: Drop duplicate check in dma_pte_free_pagetable() iommu/vt-d: Use bitmap_zalloc() when applicable iommu/amd: Remove useless irq affinity notifier iommu/amd: X2apic mode: mask/unmask interrupts on suspend/resume iommu/amd: X2apic mode: setup the INTX registers on mask/unmask iommu/amd: X2apic mode: re-enable after resume iommu/amd: Restore GA log/tail pointer on host resume iommu/iova: Move fast alloc size roundup into alloc_iova_fast() ...
2022-01-12Merge tag 'driver-core-5.17-rc1' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the set of changes for the driver core for 5.17-rc1. Lots of little things here, including: - kobj_type cleanups - auxiliary_bus documentation updates - auxiliary_device conversions for some drivers (relevant subsystems all have provided acks for these) - kernfs lock contention reduction for some workloads - other tiny cleanups and changes. All of these have been in linux-next for a while with no reported issues" * tag 'driver-core-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (43 commits) kobject documentation: remove default_attrs information drivers/firmware: Add missing platform_device_put() in sysfb_create_simplefb debugfs: lockdown: Allow reading debugfs files that are not world readable driver core: Make bus notifiers in right order in really_probe() driver core: Move driver_sysfs_remove() after driver_sysfs_add() firmware: edd: remove empty default_attrs array firmware: dmi-sysfs: use default_groups in kobj_type qemu_fw_cfg: use default_groups in kobj_type firmware: memmap: use default_groups in kobj_type sh: sq: use default_groups in kobj_type headers/uninline: Uninline single-use function: kobject_has_children() devtmpfs: mount with noexec and nosuid driver core: Simplify async probe test code by using ktime_ms_delta() nilfs2: use default_groups in kobj_type kobject: remove kset from struct kset_uevent_ops callbacks driver core: make kobj_type constant. driver core: platform: document registration-failure requirement vdpa/mlx5: Use auxiliary_device driver data helpers net/mlx5e: Use auxiliary_device driver data helpers soundwire: intel: Use auxiliary_device driver data helpers ...
2022-01-04Merge branches 'arm/smmu', 'virtio', 'x86/amd', 'x86/vt-d' and 'core' into nextJoerg Roedel1-8/+0
2021-12-22vdpa/mlx5: Use auxiliary_device driver data helpersDavid E. Box1-2/+2
Use auxiliary_get_drvdata and auxiliary_set_drvdata helpers. Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com> Signed-off-by: David E. Box <david.e.box@linux.intel.com> Link: https://lore.kernel.org/r/20211221235852.323752-5-david.e.box@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-17iommu/iova: Move fast alloc size roundup into alloc_iova_fast()John Garry via iommu1-8/+0
It really is a property of the IOVA rcache code that we need to alloc a power-of-2 size, so relocate the functionality to resize into alloc_iova_fast(), rather than the callsites. Signed-off-by: John Garry <john.garry@huawei.com> Acked-by: Will Deacon <will@kernel.org> Reviewed-by: Xie Yongji <xieyongji@bytedance.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/1638875846-23993-1-git-send-email-john.garry@huawei.com Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-12-08vdpa: Consider device id larger than 31Parav Pandit1-1/+2
virtio device id value can be more than 31. Hence, use BIT_ULL in assignment. Fixes: 33b347503f01 ("vdpa: Define vdpa mgmt device, ops and a netlink interface") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Parav Pandit <parav@nvidia.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20211130042949.88958-1-parav@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-12-08vduse: check that offset is within bounds in get_config()Dan Carpenter1-1/+2
This condition checks "len" but it does not check "offset" and that could result in an out of bounds read if "offset > dev->config_size". The problem is that since both variables are unsigned the "dev->config_size - offset" subtraction would result in a very high unsigned value. I think these checks might not be necessary because "len" and "offset" are supposed to already have been validated using the vhost_vdpa_config_validate() function. But I do not know the code perfectly, and I like to be safe. Fixes: c8a6153b6c59 ("vduse: Introduce VDUSE - vDPA Device in Userspace") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20211208150956.GA29160@kili Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Cc: stable@vger.kernel.org
2021-12-08vduse: fix memory corruption in vduse_dev_ioctl()Dan Carpenter1-1/+2
The "config.offset" comes from the user. There needs to a check to prevent it being out of bounds. The "config.offset" and "dev->config_size" variables are both type u32. So if the offset if out of bounds then the "dev->config_size - config.offset" subtraction results in a very high u32 value. The out of bounds offset can result in memory corruption. Fixes: c8a6153b6c59 ("vduse: Introduce VDUSE - vDPA Device in Userspace") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20211208103307.GA3778@kili Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Cc: stable@vger.kernel.org
2021-11-24vdpa_sim: avoid putting an uninitialized iova_domainLongpeng1-2/+5
The system will crash if we put an uninitialized iova_domain, this could happen when an error occurs before initializing the iova_domain in vdpasim_create(). BUG: kernel NULL pointer dereference, address: 0000000000000000 ... RIP: 0010:__cpuhp_state_remove_instance+0x96/0x1c0 ... Call Trace: <TASK> put_iova_domain+0x29/0x220 vdpasim_free+0xd1/0x120 [vdpa_sim] vdpa_release_dev+0x21/0x40 [vdpa] device_release+0x33/0x90 kobject_release+0x63/0x160 vdpasim_create+0x127/0x2a0 [vdpa_sim] vdpasim_net_dev_add+0x7d/0xfe [vdpa_sim_net] vdpa_nl_cmd_dev_add_set_doit+0xe1/0x1a0 [vdpa] genl_family_rcv_msg_doit+0x112/0x140 genl_rcv_msg+0xdf/0x1d0 ... So we must make sure the iova_domain is already initialized before put it. In addition, we may get the following warning in this case: WARNING: ... drivers/iommu/iova.c:344 iova_cache_put+0x58/0x70 So we must make sure the iova_cache_put() is invoked only if the iova_cache_get() is already invoked. Let's fix it together. Cc: stable@vger.kernel.org Fixes: 4080fc106750 ("vdpa_sim: use iova module to allocate IOVA addresses") Signed-off-by: Longpeng <longpeng2@huawei.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20211124015215.119-1-longpeng2@huawei.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-11-03Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds12-55/+1034
Pull virtio updates from Michael Tsirkin: "vhost and virtio fixes and features: - Hardening work by Jason - vdpa driver for Alibaba ENI - Performance tweaks for virtio blk - virtio rng rework using an internal buffer - mac/mtu programming for mlx5 vdpa - Misc fixes, cleanups" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (45 commits) vdpa/mlx5: Forward only packets with allowed MAC address vdpa/mlx5: Support configuration of MAC vdpa/mlx5: Fix clearing of VIRTIO_NET_F_MAC feature bit vdpa_sim_net: Enable user to set mac address and mtu vdpa: Enable user to set mac and mtu of vdpa device vdpa: Use kernel coding style for structure comments vdpa: Introduce query of device config layout vdpa: Introduce and use vdpa device get, set config helpers virtio-scsi: don't let virtio core to validate used buffer length virtio-blk: don't let virtio core to validate used length virtio-net: don't let virtio core to validate used length virtio_ring: validate used buffer length virtio_blk: correct types for status handling virtio_blk: allow 0 as num_request_queues i2c: virtio: Add support for zero-length requests virtio-blk: fixup coccinelle warnings virtio_ring: fix typos in vring_desc_extra virtio-pci: harden INTX interrupts virtio_pci: harden MSI-X interrupts virtio_config: introduce a new .enable_cbs method ...
2021-11-01vdpa/mlx5: Forward only packets with allowed MAC addressEli Cohen1-18/+58
Add rules to forward packets to the net device's TIR only if the destination MAC is equal to the configured MAC. This is required to prevent the netdevice from receiving traffic not destined to its configured MAC. Signed-off-by: Eli Cohen <elic@nvidia.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Link: https://lore.kernel.org/r/20211026175519.87795-9-parav@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2021-11-01vdpa/mlx5: Support configuration of MACEli Cohen1-5/+10
Add code to accept MAC configuration through vdpa tool. The MAC is written into the config struct and later can be retrieved through get_config(). Examples: 1. Configure MAC while adding a device: $ vdpa dev add mgmtdev pci/0000:06:00.2 name vdpa0 mac 00:11:22:33:44:55 2. Show configured params: $ vdpa dev config show vdpa0: mac 00:11:22:33:44:55 link down link_announce false max_vq_pairs 8 mtu 1500 Signed-off-by: Eli Cohen <elic@nvidia.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20211026175519.87795-8-parav@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-11-01vdpa/mlx5: Fix clearing of VIRTIO_NET_F_MAC feature bitParav Pandit1-1/+0
Cited patch in the fixes tag clears the features bit during reset. mlx5 vdpa device feature bits are static decided by device capabilities. These feature bits (including VIRTIO_NET_F_MAC) are initialized during device addition time. Clearing features bit in reset callback cleared the VIRTIO_NET_F_MAC. Due to this, MAC address provided by the device is not honored. Fix it by not clearing the static feature bits during reset. Fixes: 0686082dbf7a ("vdpa: Add reset callback in vdpa_config_ops") Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20211026175519.87795-7-parav@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2021-11-01vdpa_sim_net: Enable user to set mac address and mtuParav Pandit1-16/+19
Enable user to set the mac address and mtu so that each vdpa device can have its own user specified mac address and mtu. Now that user is enabled to set the mac address, remove the module parameter for same. And example of setting mac addr and mtu and view the configuration: $ vdpa mgmtdev show vdpasim_net: supported_classes net $ vdpa dev add name bar mgmtdev vdpasim_net mac 00:11:22:33:44:55 mtu 9000 $ vdpa dev config show bar: mac 00:11:22:33:44:55 link up link_announce false mtu 9000 Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20211026175519.87795-6-parav@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-11-01vdpa: Enable user to set mac and mtu of vdpa deviceParav Pandit6-7/+46
$ vdpa dev add name bar mgmtdev vdpasim_net mac 00:11:22:33:44:55 mtu 9000 $ vdpa dev config show bar: mac 00:11:22:33:44:55 link up link_announce false mtu 9000 $ vdpa dev config show -jp { "config": { "bar": { "mac": "00:11:22:33:44:55", "link ": "up", "link_announce ": false, "mtu": 9000, } } } Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20211026175519.87795-5-parav@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
2021-11-01vdpa: Introduce query of device config layoutParav Pandit1-0/+176
Introduce a command to query a device config layout. An example query of network vdpa device: $ vdpa dev add name bar mgmtdev vdpasim_net $ vdpa dev config show bar: mac 00:35:09:19:48:05 link up link_announce false mtu 1500 $ vdpa dev config show -jp { "config": { "bar": { "mac": "00:35:09:19:48:05", "link ": "up", "link_announce ": false, "mtu": 1500, } } } Signed-off-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Eli Cohen <elic@nvidia.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20211026175519.87795-3-parav@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-11-01vdpa: Introduce and use vdpa device get, set config helpersParav Pandit1-0/+36
Subsequent patches enable get and set configuration either via management device or via vdpa device' config ops. This requires synchronization between multiple callers to get and set config callbacks. Features setting also influence the layout of the configuration fields endianness. To avoid exposing synchronization primitives to callers, introduce helper for setting the configuration and use it. Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20211026175519.87795-2-parav@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-11-01vdpa/mlx5: Propagate link status from device to vdpa driverEli Cohen1-2/+92
Add code to register to hardware asynchronous events. Use this mechanism to track link status events coming from the device and update the config struct. After doing link status change, call the vdpa callback to notify of the link status change. Signed-off-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20210909123635.30884-4-elic@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2021-11-01vdpa/mlx5: Rename control VQ workqueue to vdpa wqEli Cohen2-5/+5
A subesequent patch will use the same workqueue for executing other work not related to control VQ. Rename the workqueue and the work queue entry used to convey information to the workqueue. Signed-off-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20210909123635.30884-3-elic@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2021-11-01vdpa/mlx5: Remove mtu field from vdpa net deviceEli Cohen1-4/+5
No need to save the mtu int the net device struct. We can save it in the config struct which cannot be modified. Moreover, move the initialization to. mlx5_vdpa_set_features() callback is not the right place to put it. Signed-off-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20210909123635.30884-2-elic@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-11-01eni_vdpa: add vDPA driver for Alibaba ENIWu Zongyong4-0/+565
This patch adds a new vDPA driver for Alibaba ENI(Elastic Network Interface) which is build upon virtio 0.9.5 specification. And this driver is only enabled on X86 host currently. Link: https://lore.kernel.org/r/6a9f32c00609af16bbb2ea32e633b3beb1cbf84b.1635493219.git.wuzongyong@linux.alibaba.com Signed-off-by: Wu Zongyong <wuzongyong@linux.alibaba.com> Link: https://lore.kernel.org/r/20211026083214.3375383-1-arnd@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> # fix Kconfig typo Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-11-01vdpa: add new attribute VDPA_ATTR_DEV_MIN_VQ_SIZEWu Zongyong1-0/+5
This attribute advertises the min value of virtqueue size. The value is 1 by default. Signed-off-by: Wu Zongyong <wuzongyong@linux.alibaba.com> Link: https://lore.kernel.org/r/2bbc417355c4d22298050b1ba887cecfbde3e85d.1635493219.git.wuzongyong@linux.alibaba.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-11-01vdpa: min vq num of vdpa device cannot be greater than max vq numWu Zongyong1-0/+8
Just failed to probe the vdpa device if the min virtqueue num returned by get_vq_num_min is greater than the max virtqueue num returned by get_vq_num_max. Signed-off-by: Wu Zongyong <wuzongyong@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/21199b62cc10b2a9f2cf90eeb63ad080645d881f.1635493219.git.wuzongyong@linux.alibaba.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-11-01vp_vdpa: add vq irq offloading supportWu Zongyong1-0/+12
This patch implements the get_vq_irq() callback for virtio pci devices to allow irq offloading. Signed-off-by: Wu Zongyong <wuzongyong@linux.alibaba.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/bb091e5505db704dd620f8854a7aebc921d2a752.1635493219.git.wuzongyong@linux.alibaba.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-10-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-4/+25
include/net/sock.h 7b50ecfcc6cd ("net: Rename ->stream_memory_read to ->sock_is_readable") 4c1e34c0dbff ("vsock: Enable y2038 safe timeval for timeout") drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c 0daa55d033b0 ("octeontx2-af: cn10k: debugfs for dumping LMTST map table") e77bcdd1f639 ("octeontx2-af: Display all enabled PF VF rsrc_alloc entries.") Adjacent code addition in both cases, keep both. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-22vduse: Fix race condition between resetting and irq injectingXie Yongji1-12/+25
The interrupt might be triggered after a reset since there is no synchronization between resetting and irq injecting. And it might break something if the interrupt is delayed until a new round of device initialization. Fixes: c8a6153b6c59 ("vduse: Introduce VDUSE - vDPA Device in Userspace") Signed-off-by: Xie Yongji <xieyongji@bytedance.com> Link: https://lore.kernel.org/r/20210929083050.88-1-xieyongji@bytedance.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-22 10:11:10 +0000