summaryrefslogtreecommitdiff
path: root/drivers/usb/gadget
AgeCommit message (Collapse)AuthorFilesLines
2015-09-21usb: gadget: drop null test before destroy functionsJulia Lawall4-8/+4
Remove unneeded NULL test. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x; @@ -if (x != NULL) \(kmem_cache_destroy\|mempool_destroy\|dma_pool_destroy\)(x); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-09-21usb: gadget: dummy_hcd: in transfer(), return data sent, not limitIgor Kotrasinski1-2/+4
dummy_timer uses transfer() to update transfer limit. However, limit passed to dummy_timer changes depending on transfer type, so the actual limit is overwritten. This can cause unpredictably slow / fast bulk transfers when coupled with control / interrupt transfers. Fix by returning actual amount of data sent in transfer() and substracting from total. Signed-off-by: Igor Kotrasinski <i.kotrasinsk@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-09-21usb: gadget: dummy_hcd: fix rescan logic for transferIgor Kotrasinski1-5/+8
transfer() schedules a rescan for transfers larger than maxpacket, which is wrong for transfers that are multiples of maxpacket. Rewrite to fix and clarify packet multiple / remainder transfer logic. Signed-off-by: Igor Kotrasinski <i.kotrasinsk@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-09-21usb: gadget: dummy_hcd: fix unneeded else-if conditionIgor Kotrasinski1-1/+1
We already know at this point that to_host is false. Signed-off-by: Igor Kotrasinski <i.kotrasinsk@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-09-21usb: gadget: dummy_hcd: emulate sending zlp in packet logicIgor Kotrasinski1-8/+17
currently, when a zlp flag is set and an urb/usb_request buffer is filled without a short packet, transfer() leaves its status at -EINPROGRESS and does not rescan for short packet. In a scenario where ep.maxpacket bytes are copied, URB_ZERO_PACKET is set, urb buffer is filled and usb_request buffer is not, transfer() returns with an urb with -EINPROGRESS status, which dummy_hcd treats as incomplete transfer. Check for zlp and rescan appropriately. Signed-off-by: Igor Kotrasinski <i.kotrasinsk@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-09-21usb: gadget: atmel_usba_udc: add ep capabilities support on device tree bindingSylvain Rochet1-0/+11
The recently added endpoint capabilities flags verification breaks Atmel USBA because the endpoint configuration was only added when the driver is bound using the legacy pdata interface. Convert endpoint configuration to new capabilities model when driver is bound to a device tree as well. Signed-off-by: Sylvain Rochet <sylvain.rochet@finsecur.com> Fixes: 47bef3865115 ("usb: gadget: atmel_usba_udc: add ep capabilities support") Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-09-14usb: gadget: amd5536udc: fix error handling in udc_pci_probe()Alexey Khoroshilov1-23/+20
If a failure happens early in udc_pci_probe(), error handling code just kfree(dev) and returns. The patch adds proper resource deallocations in udc_pci_probe() itself, since udc_pci_remove() is not suitabe to be called so early in initialization process. By the way, iounmap(dev->regs) is replaced by iounmap(dev->virt_addr) in udc_pci_remove() for clarity. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-09-14usb: gadget: fix possible regression introduced with ep->claimedRobert Baldyga1-0/+1
This patch fixes possible regression introduced by patch reworking endpoint claiming mechanism. It restores setring ep->driver_data to NULL in usb_ep_autoconfig_reset(), which was removed by patch commit cc476b42a39d. Fixes: cc476b42a39d ("usb: gadget: encapsulate endpoint claiming mechanism") Reported-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-09-01Merge branch 'for-next' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "The usual stuff from trivial tree for 4.3 (kerneldoc updates, printk() fixes, Documentation and MAINTAINERS updates)" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (28 commits) MAINTAINERS: update my e-mail address mod_devicetable: add space before */ scsi: a100u2w: trivial typo in printk i2c: Fix typo in i2c-bfin-twi.c treewide: fix typos in comment blocks Doc: fix trivial typo in SubmittingPatches proportions: Spelling s/consitent/consistent/ dm: Spelling s/consitent/consistent/ aic7xxx: Fix typo in error message pcmcia: Fix typo in locking documentation scsi/arcmsr: Fix typos in error log drm/nouveau/gr: Fix typo in nv10.c [SCSI] Fix printk typos in drivers/scsi staging: comedi: Grammar s/Enable support a/Enable support for a/ Btrfs: Spelling s/consitent/consistent/ README: GTK+ is a acronym ASoC: omap: Fix typo in config option description mm: tlb.c: Fix error message ntfs: super.c: Fix error log fix typo in Documentation/SubmittingPatches ...
2015-08-14usb: gadget: atmel: remove useless includeAlexandre Belloni1-1/+0
Definitions from linux/platform_data/atmel.h are not used, remove the include. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-14Merge tag 'usb-for-v4.3' of ↵Greg Kroah-Hartman66-804/+1375
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb: patches for v4.3 merge window New support for Allwinne SoC on the MUSB driver has been added to the list of glue layers. MUSB also got support for building all DMA engines in one binary; this will be great for distros. DWC3 now has no trace of dev_dbg()/dev_vdbg() usage. We will rely solely on tracing to debug DWC3. There was also a fix for memory corruption with EP0 when maxpacket size transfers are > 512 bytes. Robert's EP capabilities flags is making EP selection a lot simpler. UDCs are now required to set these flags up when adding endpoints to the framework. Other than these, we have the usual set of miscelaneous cleanups and minor fixes. Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-08-07treewide: fix typos in comment blocksMasahiro Yamada1-1/+1
Looks like the word "contiguous" is often mistyped. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2015-08-07drivers/usb/gadget/composite.c: i18n is not an acronymDiego Viola1-2/+2
Signed-off-by: Diego Viola <diego.viola@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
2015-08-06usb: gadget: legacy: nokia: add CONFIG_BLOCK dependencyFelipe Balbi1-0/+1
g_nokia now has mass_storage function, so it should depend on CONFIG_BLOCK. Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-08-06usb: gadget: f_mass_storage: add mising <linux/uaccess.h>Felipe Balbi1-0/+1
<linux/uaccess.h> was originally being pulled indirectly through some other header, however it's not anymore, so we need to include it directly Reported-by: Jim Davis <jim.epost@gmail.com> Suggested-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-08-06usb: gadget: remove gadget_chips.hRobert Baldyga15-74/+0
This header file contains helpers for quirks based on UDC controller name. Since we have generic quirk bitfields in usb_gadget structure for all of these quirks we don't need to have this header any longer. This patch removes gadget_chips.h file and makes sure that it's no longer included anywhere in kernel sources. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-08-06usb: musb: gadget: add musb_match_ep() functionRobert Baldyga1-23/+0
Add 'match_ep' callback to utilize chip-specific knowledge in endpoint matching process. Function does the same that was done by chip-specific code inside of epautoconf. Now this code can be removed from there to separate generic code from platform specific logic. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-08-06usb: gadget: goku_udc: add goku_match_ep() functionRobert Baldyga2-18/+32
Add 'match_ep' callback to utilize chip-specific knowledge in endpoint matching process. Function does the same that was done by chip-specific code inside of epautoconf. Now this code can be removed from there to separate generic code from platform specific logic. [ balbi@ti.com : fix build breakage ] Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-08-06usb: gadget: net2280: add net2280_match_ep() functionRobert Baldyga2-22/+29
Add 'match_ep' callback to utilize chip-specific knowledge in endpoint matching process. Function does the same that was done by chip-specific code inside of epautoconf. Now this code can be removed from there to separate generic code from platform specific logic. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-08-06usb: gadget: move find_ep() from epautoconf to udc-coreRobert Baldyga2-21/+30
Move find_ep() to udc-core and rename it to gadget_find_ep_by_name(). It can be used in UDC drivers, especially in 'match_ep' callback after moving chip-specific endpoint matching logic from epautoconf to UDC drivers. Replace all calls of find_ep() function with gadget_find_ep_by_name(). Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-08-06usb: gadget: move ep_matches() from epautoconf to udc-coreRobert Baldyga2-84/+80
Move ep_matches() function to udc-core and rename it to usb_gadget_ep_match_desc(). This function can be used by UDC drivers in 'match_ep' callback to avoid writing lots of repetitive code. Replace all calls of ep_matches() with usb_gadget_ep_match_desc(). Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-08-06usb: gadget: add 'ep_match' callback to usb_gadget_opsRobert Baldyga1-0/+6
Add callback that is called by epautoconf to allow UDC driver match the best endpoint for specific descriptor. It's intended to supply mechanism which allows to get rid of chip-specific endpoint matching code from epautoconf. If gadget has set 'ep_match' callback we prefer to call it first, and if it fails to find matching endpoint, then we try to use default matching algorithm. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-08-06usb: gadget: epautoconf: rework ep_matches() functionRobert Baldyga1-49/+32
Rework ep_matches() function to make it shorter and more readable. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-08-04usb: gadget: epautoconf: remove ep and desc configuration from ep_matches()Robert Baldyga1-32/+34
As function ep_matches() is used to match endpoint with usb descriptor it's highly unintuitive that it modifies endpoint and descriptor structures fields. This patch moves code configuring ep and desc from ep_matches() to usb_ep_autoconfig_ss(), so now function ep_matches() does nothing more than its name suggests. [ balbi@ti.com : fix build warning ] Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-08-04usb: gadget: epautoconf: remove pxa quirk from ep_matches()Robert Baldyga2-11/+3
The same effect can be achieved by using capabilities flags, so now we can get rid of handling of hardware specific limitations in generic code. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-08-04usb: gadget: epautoconf: add endpoint capabilities flags verificationRobert Baldyga1-66/+30
Introduce endpoint matching mechanism basing on endpoint capabilities flags. We check if endpoint supports transfer type and direction requested in ep descriptor. Since we have this new endpoint matching mechanism there is no need to have old code guessing endpoint capabilities basing on its name, so we are getting rid of it. Remove also the obsolete comment. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-08-04usb: gadget: atmel_usba_udc: add ep capabilities supportRobert Baldyga1-0/+11
Convert endpoint configuration to new capabilities model. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-08-04usb: gadget: udc-xilinx: add ep capabilities supportRobert Baldyga1-0/+9
Convert endpoint configuration to new capabilities model. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-08-04usb: gadget: s3c2410_udc: add ep capabilities supportRobert Baldyga1-0/+10
Convert endpoint configuration to new capabilities model. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-08-04usb: gadget: s3c-hsudc: add ep capabilities supportRobert Baldyga1-0/+15
Convert endpoint configuration to new capabilities model. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-08-04usb: gadget: r8a66597-udc: add ep capabilities supportRobert Baldyga1-0/+10
Convert endpoint configuration to new capabilities model. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-08-04usb: gadget: pxa27x_udc: add ep capabilities supportRobert Baldyga1-15/+25
Convert endpoint configuration to new capabilities model. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-08-04usb: gadget: pxa25x_udc: add ep capabilities supportRobert Baldyga1-0/+32
Convert endpoint configuration to new capabilities model. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-08-04usb: gadget: pch_udc: add ep capabilities supportRobert Baldyga1-2/+12
Convert endpoint configuration to new capabilities model. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-08-04usb: gadget: omap_udc: add ep capabilities supportRobert Baldyga1-0/+22
Convert endpoint configuration to new capabilities model. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-08-04usb: gadget: net2280: add ep capabilities supportRobert Baldyga1-12/+55
Convert endpoint configuration to new capabilities model. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-08-04usb: gadget: net2272: add ep capabilities supportRobert Baldyga1-0/+11
Convert endpoint configuration to new capabilities model. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-08-04usb: gadget: mv_udc_core: add ep capabilities supportRobert Baldyga1-0/+9
Convert endpoint configuration to new capabilities model. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-08-04usb: gadget: mv_u3d_core: add ep capabilities supportRobert Baldyga1-0/+9
Convert endpoint configuration to new capabilities model. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-08-04usb: gadget: m66592-udc: add ep capabilities supportRobert Baldyga1-0/+11
Convert endpoint configuration to new capabilities model. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-08-04usb: gadget: lpc32xx_udc: add ep capabilities supportRobert Baldyga1-0/+32
Convert endpoint configuration to new capabilities model. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-08-04usb: gadget: gr_udc: add ep capabilities supportRobert Baldyga1-0/+11
Convert endpoint configuration to new capabilities model. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-08-04usb: gadget: goku_udc: add ep capabilities supportRobert Baldyga1-0/+8
Convert endpoint configuration to new capabilities model. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-08-04usb: gadget: fusb300_udc: add ep capabilities supportRobert Baldyga1-0/+11
Convert endpoint configuration to new capabilities model. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-08-04usb: gadget: fsl_udc_core: add ep capabilities supportRobert Baldyga1-0/+13
Convert endpoint configuration to new capabilities model. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-08-04usb: gadget: fsl_qe_udc: add ep capabilities supportRobert Baldyga1-0/+11
Convert endpoint configuration to new capabilities model. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-08-04usb: gadget: fotg210-udc: add ep capabilities supportRobert Baldyga1-0/+11
Convert endpoint configuration to new capabilities model. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-08-04usb: gadget: dummy-hcd: add ep capabilities supportRobert Baldyga1-15/+80
Convert endpoint configuration to new capabilities model. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-08-04usb: gadget: bdc: add ep capabilities supportRobert Baldyga1-0/+9
Convert endpoint configuration to new capabilities model. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-08-04usb: gadget: bcm63xx_udc: add ep capabilities supportRobert Baldyga1-4/+25
Convert endpoint configuration to new capabilities model. Signed-off-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-20 22:00:05 +0000