summaryrefslogtreecommitdiff
path: root/drivers/thermal/ti-soc-thermal
AgeCommit message (Collapse)AuthorFilesLines
2022-07-28thermal/ti-soc-thermal: Fix comment typoJason Wang1-1/+1
The double `and' is duplicated in line 229, remove one. Signed-off-by: Jason Wang <wangborong@cdjrlc.com> Link: https://lore.kernel.org/r/20220715051829.30927-1-wangborong@cdjrlc.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-03-08thermal/drivers/ti-soc-thermal: Remove unused function ti_thermal_get_temp()YueHaibing1-8/+0
commit b263b473bf62 ("thermal: ti-soc-thermal: Remove redundant code") left behind this, remove it. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Bryan Brattlof <bb@ti.com> Link: https://lore.kernel.org/r/20220305125047.26948-1-yuehaibing@huawei.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-03-08drivers/thermal/ti-soc-thermal: Add hwmon supportRomain Naour1-0/+4
Expose ti-soc-thermal thermal sensors as HWMON devices. # sensors cpu_thermal-virtual-0 Adapter: Virtual device temp1: +54.2 C (crit = +105.0 C) dspeve_thermal-virtual-0 Adapter: Virtual device temp1: +51.4 C (crit = +105.0 C) gpu_thermal-virtual-0 Adapter: Virtual device temp1: +54.2 C (crit = +105.0 C) iva_thermal-virtual-0 Adapter: Virtual device temp1: +54.6 C (crit = +105.0 C) core_thermal-virtual-0 Adapter: Virtual device temp1: +52.6 C (crit = +105.0 C) Similar to imx_sc_thermal d2bc4dd91da6095a769fdc9bc519d3be7ad5f97a. No need to take care of thermal_remove_hwmon_sysfs() since devm_thermal_add_hwmon_sysfs() (a wrapper around devres) is used. See c7fc403e40b0ea18976a59e968c23439a80809e8. Signed-off-by: Romain Naour <romain.naour@smile.fr> Link: https://lore.kernel.org/r/20220218104725.2718904-1-romain.naour@smile.fr Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2021-05-24thermal/ti-soc-thermal: Fix kernel-docYang Li1-1/+1
Fix function name in ti-bandgap.c kernel-doc comment to remove a warning. drivers/thermal/ti-soc-thermal/ti-bandgap.c:787: warning: expecting prototype for ti_bandgap_alert_init(). Prototype was for ti_bandgap_talert_init() instead. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Acked-by: Suman Anna <s-anna@ti.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1621851963-36548-1-git-send-email-yang.lee@linux.alibaba.com
2021-04-21thermal/drivers/ti-soc-thermal/bandgap Remove unused variable 'val'Lin Ruizhe1-4/+0
The function ti_bandgap_restore_ctxt() restores the context at resume time. It checks if the sensor has a counter, reads the register but does nothing with the value. The block was probably omitted by the commit b87ea759a4cc. Remove the unused variable as well as the block using it as we can consider it as dead code. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: b87ea759a4cc ("staging: omap-thermal: fix context restore function") Signed-off-by: Lin Ruizhe <linruizhe@huawei.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210421084256.57591-1-linruizhe@huawei.com
2021-04-20thermal/drivers/ti-soc-thermal/ti-bandgap: Rearrange all the included header ↵Zhen Lei1-17/+17
files alphabetically For the sake of lisibility, reorder the header files alphabetically. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Reviewed-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210406091912.2583-2-thunder.leizhen@huawei.com
2021-03-10thermal:ti-soc-thermal: Remove duplicate include in ti-bandgapZhang Yunkai1-1/+0
'of_device.h' included in 'ti-bandgap.c' is duplicated. It is also included in the 25th line. Signed-off-by: Zhang Yunkai <zhang.yunkai@zte.com.cn> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210306123415.219441-1-zhang.yunkai@zte.com.cn
2021-02-15thermal: ti-soc-thermal: Use non-inverted define for omap4Tony Lindgren2-4/+4
When we set bit 10 high we use continuous mode and not single mode. Let's correct this to avoid confusion. No functional changes here, the code does the right thing with bit 10. Cc: Adam Ford <aford173@gmail.com> Cc: Carl Philipp Klemm <philipp@uvos.xyz> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: H. Nikolaus Schaller <hns@goldelico.com> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Adam Ford <aford173@gmail.com> #logicpd-torpedo-37xx-devkit Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210205134534.49200-5-tony@atomide.com
2021-02-15thermal: ti-soc-thermal: Simplify polling with iopollTony Lindgren1-16/+14
We can use iopoll for checking the EOCZ (end of conversion) bit. And with this we now also want to handle the timeout errors properly. For omap3, we need about 1.2ms for the single mode sampling to wait for EOCZ down, so let's use 1.5ms timeout there. Waiting for sampling to start is faster and we can use 1ms timeout. Cc: Adam Ford <aford173@gmail.com> Cc: Carl Philipp Klemm <philipp@uvos.xyz> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: H. Nikolaus Schaller <hns@goldelico.com> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Adam Ford <aford173@gmail.com> #logicpd-torpedo-37xx-devkit Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210205134534.49200-4-tony@atomide.com
2021-02-15thermal: ti-soc-thermal: Fix stuck sensor with continuous mode for 4430Tony Lindgren3-4/+14
At least for 4430, trying to use the single conversion mode eventually hangs the thermal sensor. This can be quite easily seen with errors: thermal thermal_zone0: failed to read out thermal zone (-5) Also, trying to read the temperature shows a stuck value with: $ while true; do cat /sys/class/thermal/thermal_zone0/temp; done Where the temperature is not rising at all with the busy loop. Additionally, the EOCZ (end of conversion) bit is not rising on 4430 in single conversion mode while it works fine in continuous conversion mode. It is also possible that the hung temperature sensor can affect the thermal shutdown alert too. Let's fix the issue by adding TI_BANDGAP_FEATURE_CONT_MODE_ONLY flag and use it for 4430. Note that we also need to add udelay to for the EOCZ (end of conversion) bit polling as otherwise we have it time out too early on 4430. We'll be changing the loop to use iopoll in the following clean-up patch. Cc: Adam Ford <aford173@gmail.com> Cc: Carl Philipp Klemm <philipp@uvos.xyz> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: H. Nikolaus Schaller <hns@goldelico.com> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Adam Ford <aford173@gmail.com> #logicpd-torpedo-37xx-devkit Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210205134534.49200-3-tony@atomide.com
2021-02-15thermal: ti-soc-thermal: Skip pointless register access for dra7Tony Lindgren1-14/+15
On dra7, there is no Start of Conversion (SOC) register bit and we have an empty bgap_soc_mask in the configuration for the thermal driver. Let's not do pointless reads and writes with the empty mask. There's also no point waiting for End of Conversion bit (EOCZ) to go high on dra7. We only care about it going down, and are now mostly timing out waiting for EOCZ high while it has already gone down. When we add checking for the timeout errors in a later patch, waiting for EOCZ high would cause bogus time out errors. Cc: Adam Ford <aford173@gmail.com> Cc: Carl Philipp Klemm <philipp@uvos.xyz> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: H. Nikolaus Schaller <hns@goldelico.com> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Adam Ford <aford173@gmail.com> #logicpd-torpedo-37xx-devkit Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210205134534.49200-2-tony@atomide.com
2021-01-19thermal/core: Remove ms based delay fieldsDaniel Lezcano1-2/+4
The code does no longer use the ms unit based fields to set the delays as they are replaced by the jiffies. Remove them and replace their user to use the jiffies version instead. Cc: Thara Gopinath <thara.gopinath@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Reviewed-by: Peter Kästle <peter@piie.net> Acked-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20201216220337.839878-3-daniel.lezcano@linaro.org
2020-11-12thermal: ti-soc-thermal: Disable the CPU PM notifier for OMAP4430Peter Ujfalusi1-2/+16
It has been observed that on OMAP4430 (ES2.0, ES2.1 and ES2.3) the enabled notifier causes errors on the DTEMP readout values: ti-soc-thermal 4a002260.bandgap: in range ADC val: 52 ti-soc-thermal 4a002260.bandgap: in range ADC val: 64 ti-soc-thermal 4a002260.bandgap: in range ADC val: 64 ti-soc-thermal 4a002260.bandgap: out of range ADC val: 0 thermal thermal_zone0: failed to read out thermal zone (-5) ti-soc-thermal 4a002260.bandgap: out of range ADC val: 0 thermal thermal_zone0: failed to read out thermal zone (-5) ti-soc-thermal 4a002260.bandgap: out of range ADC val: 4 thermal thermal_zone0: failed to read out thermal zone (-5) ti-soc-thermal 4a002260.bandgap: in range ADC val: 100 raw 100 translates to 133 Celsius on omap4-sdp, triggering shutdown due to critical temperature. When the notifier is disable for OMAP4430 the DTEMP values are stable: ti-soc-thermal 4a002260.bandgap: in range ADC val: 56 ti-soc-thermal 4a002260.bandgap: in range ADC val: 56 ti-soc-thermal 4a002260.bandgap: in range ADC val: 57 ti-soc-thermal 4a002260.bandgap: in range ADC val: 57 ti-soc-thermal 4a002260.bandgap: in range ADC val: 56 Fixes: 5093402e5b44 ("thermal: ti-soc-thermal: Enable addition power management") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Tony Lindgren <tony@atomide.com> Acked-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20201029100335.27665-1-peter.ujfalusi@ti.com
2020-10-12thermal: ti-soc-thermal: Enable addition power managementAdam Ford2-1/+59
The bandgap sensor can be idled when the processor is too, but it isn't currently being done, so the power consumption of OMAP3 boards can elevated if the bangap sensor is enabled. This patch attempts to use some additional power management to idle the clock to the bandgap when not needed. Signed-off-by: Adam Ford <aford173@gmail.com> Reported-by: kernel test robot <lkp@intel.com> Tested-by: Andreas Kemnade <andreas@kemnade.info> # GTA04 Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200911123157.759379-1-aford173@gmail.com
2020-09-04thermal: ti-soc-thermal: Fix bogus thermal shutdowns for omap4430Tony Lindgren2-14/+19
We can sometimes get bogus thermal shutdowns on omap4430 at least with droid4 running idle with a battery charger connected: thermal thermal_zone0: critical temperature reached (143 C), shutting down Dumping out the register values shows we can occasionally get a 0x7f value that is outside the TRM listed values in the ADC conversion table. And then we get a normal value when reading again after that. Reading the register multiple times does not seem help avoiding the bogus values as they stay until the next sample is ready. Looking at the TRM chapter "18.4.10.2.3 ADC Codes Versus Temperature", we should have values from 13 to 107 listed with a total of 95 values. But looking at the omap4430_adc_to_temp array, the values are off, and the end values are missing. And it seems that the 4430 ADC table is similar to omap3630 rather than omap4460. Let's fix the issue by using values based on the omap3630 table and just ignoring invalid values. Compared to the 4430 TRM, the omap3630 table has the missing values added while the TRM table only shows every second value. Note that sometimes the ADC register values within the valid table can also be way off for about 1 out of 10 values. But it seems that those just show about 25 C too low values rather than too high values. So those do not cause a bogus thermal shutdown. Fixes: 1a31270e54d7 ("staging: omap-thermal: add OMAP4 data structures") Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200706183338.25622-1-tony@atomide.com
2020-07-21thermal: ti-soc-thermal: Fix reversed condition in ti_thermal_expose_sensor()Dan Carpenter1-1/+1
This condition is reversed and will cause breakage. Fixes: 7440f518dad9 ("thermal/drivers/ti-soc-thermal: Avoid dereferencing ERR_PTR") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200616091949.GA11940@mwanda
2020-04-29thermal/drivers/ti-soc-thermal: Avoid dereferencing ERR_PTRSudip Mukherjee1-3/+3
On error the function ti_bandgap_get_sensor_data() returns the error code in ERR_PTR() but we only checked if the return value is NULL or not. And, so we can dereference an error code inside ERR_PTR. While at it, convert a check to IS_ERR_OR_NULL. Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200424161944.6044-1-sudipm.mukherjee@gmail.com
2020-04-14thermal: Delete an error message in four functionsMarkus Elfring1-3/+2
The function “platform_get_irq” can log an error already. Thus omit redundant messages for the exception handling in the calling functions. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/05f49ae7-5cc7-d6a0-fc3d-abaf2a0b373c@web.de
2020-03-12thermal: ti-soc-thermal: Use GPIO descriptorsLinus Walleij2-33/+15
This switches the TI SoC thermal driver to use GPIO descriptors instead of retrieveing a GPIO number from the device tree and requesting the GPIO separately. Cc: Keerthy <j-keerthy@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200229210532.173430-1-linus.walleij@linaro.org
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 336Thomas Gleixner7-105/+7
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin st fifth floor boston ma 02110 1301 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 246 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000436.674189849@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282Thomas Gleixner4-39/+4
Based on 1 normalized pattern(s): this software is licensed under the terms of the gnu general public license version 2 as published by the free software foundation and may be copied distributed and modified under those terms this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 285 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.642774971@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-27thermal: ti-soc-thermal: remove dead codeBartlomiej Zolnierkiewicz9-654/+5
Majority of this code (i.e. functions from ti-bandgap.c) has been introduced in May 2013 by commit eb982001dbd8 ("thermal: introduce TI SoC thermal driver"). Just remove it altogether (in case it is needed it can be easily resurrected from git repo). While at it fix incorrect "not used" comments. Tested-by: Keerthy <j-keerthy@ti.com> Acked-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-06-01thermal: ti-soc-thermal: fix incorrect entry in omap5430_adc_to_temp[]Bartlomiej Zolnierkiewicz1-1/+1
Entry for Index 941 has one zero too much. Fix it. Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-11-17Merge branch 'next' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management updates from Zhang Rui: - introduce brcmstb AVS TMON thermal driver (Brian Norris) - add Rockchip RV1108 support in rockchip thermal driver (Rocky Hao) - major rework on HISI driver plus additional support of hisi3660 (Daniel Lezcano) - add nvmem-cells binding on imx6sx (Leonard Crestez) - fix a NULL pointer dereference on ti thermal driver unloading (Tony Lindgren) - improve tmon tool to make it easier to cross-compile tmon (Markus Mayer) - add Coffee Lake and Cannon Lake support for intel processor and pch thermal drivers (Srinivas Pandruvada) - other small fixes and cleanups (Arvind Yadav, Colin Ian King, Allen Wild, Nicolin Chen, Baruch SiachNiklas Söderlund, Arnd Bergmann) * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (44 commits) thermal: pch: Add Cannon Lake support thermal: int340x: processor_thermal: Add Coffee Lake support thermal: int340x: processor_thermal: Add Cannon Lake support thermal: bxt: remove redundant variable trip thermal: cpu_cooling: pr_err() strings should end with newlines thermal: add brcmstb AVS TMON driver Documentation: devicetree: add binding for Broadcom STB AVS TMON thermal/drivers/hisi: Add support for hi3660 SoC thermal/drivers/hisi: Prepare to add support for other hisi platforms thermal/drivers/hisi: Add platform prefix to function name thermal/drivers/hisi: Put platform code together thermal/drivers/qcom-spmi: Use devm_iio_channel_get thermal/drivers/generic-iio-adc: Switch tz request to devm version thermal/drivers/step_wise: Fix temperature regulation misbehavior thermal/drivers/hisi: Use round up step value thermal/drivers/hisi: Move the clk setup in the corresponding functions thermal/drivers/hisi: Remove mutex_lock in the code thermal/drivers/hisi: Remove thermal data back pointer thermal/drivers/hisi: Convert long to int thermal/drivers/hisi: Rename and remove unused field ...
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-31thermal: ti-soc-thermal: Fix ti_thermal_unregister_cpu_cooling NULL pointer ↵Tony Lindgren1-1/+2
on unload While debugging some PM issues and trying to remove all the loaded modules, I ran across the following when unloading ti-soc-thermal: Unable to handle kernel NULL pointer dereference at virtual address 000000b4 ... [<c08db340>] (kobject_put) from [<bf28954c>] (ti_thermal_unregister_cpu_cooling+0x20/0x28 [ti_soc_thermal]) [<bf28954c>] (ti_thermal_unregister_cpu_cooling [ti_soc_thermal]) from [<bf287c88>] (ti_bandgap_remove+0x3c/0x104 [ti_soc_thermal]) [<bf287c88>] (ti_bandgap_remove [ti_soc_thermal]) from [<c0610d48>] (platform_drv_remove+0x24/0x3c) [<c0610d48>] (platform_drv_remove) from [<c060f114>] (device_release_driver_internal+0x160/0x208) [<c060f114>] (device_release_driver_internal) from [<c060f200>] (driver_detach+0x38/0x6c) [<c060f200>] (driver_detach) from [<c060e2d4>] (bus_remove_driver+0x4c/0xa0) [<c060e2d4>] (bus_remove_driver) from [<c01f2370>] (SyS_delete_module+0x168/0x238) [<c01f2370>] (SyS_delete_module) from [<c0108240>] (ret_fast_syscall+0x0/0x28) Cc: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-07-05Merge branch 'linus' of ↵Zhang Rui1-7/+15
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal into thermal-soc
2017-05-27thermal: cpu_cooling: use cpufreq_policy to register cooling deviceViresh Kumar1-7/+15
The CPU cooling driver uses the cpufreq policy, to get clip_cpus, the frequency table, etc. Most of the callers of CPU cooling driver's registration routines have the cpufreq policy with them, but they only pass the policy->related_cpus cpumask. The __cpufreq_cooling_register() routine then gets the policy by itself and uses it. It would be much better if the callers can pass the policy instead directly. This also fixes a basic design flaw, where the policy can be freed while the CPU cooling driver is still active. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Tested-by: Lukasz Luba <lukasz.luba@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-05-23ti-soc-thermal: Fix a typo in a comment lineMarkus Elfring1-1/+1
Add a missing character in this description for a function. Acked-by: Keerthy <j-keerthy@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-05-23ti-soc-thermal: Delete error messages for failed memory allocations in ↵Markus Elfring1-6/+2
ti_bandgap_build() The script "checkpatch.pl" pointed information out like the following. WARNING: Possible unnecessary 'out of memory' message Thus remove such statements here. Link: http://events.linuxfoundation.org/sites/events/files/slides/LCJ16-Refactor_Strings-WSang_0.pdf Acked-by: Keerthy <j-keerthy@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-05-23ti-soc-thermal: Use devm_kcalloc() in ti_bandgap_build()Markus Elfring1-2/+2
A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus use the corresponding function "devm_kcalloc". This issue was detected by using the Coccinelle software. Acked-by: Keerthy <j-keerthy@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-03-29thermal: ti-soc-thermal: Remove redundant codeKeerthy1-151/+3
ti_thermal_expose_sensor always takes the devm_thermal_zone_of_sensor_register call for registration with the device tree nodes present for all the bandgap sensors for omap3/4/5 and dra7 family. There are large chunks of unused code. Removing all of them. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-03-29thermal: ti-soc-thermal: Remove redundant constantsKeerthy6-44/+0
Now that slope and offset data are being passed from device tree no need to populate in driver data. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-03-29thermal: ti-soc-thermal: Fetch slope and offset from DTKeerthy1-2/+2
Currently slope and offset values for calculating the hot spot temperature of a thermal zone is being taken directly from driver data. So fetch them from device tree. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-02-18thermal: arm: dra752: Remove all TSHUT related definitionsKeerthy2-44/+0
No configuration needs to be done for TSHUT from software. Hence remove all the unnecessary definitions. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-02-18thermal: arm: dra752: Remove TSHUT configurationKeerthy1-2/+1
Technical Reference Manual [1] mandates that software should not be configuring the thermal shutdown thresholds. Hence removing TSHUT_CONFIG. [1] http://www.ti.com/lit/ug/sprui30b/sprui30b.pdf Signed-off-by: Keerthy <j-keerthy@ti.com> Reported-by: Ravikumar Kattekola <rk@ti.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-02-18thermal: ti-soc-thermal: Remove CPU_THERMAL Dependency from TI_THERMALKeerthy1-1/+0
Currently when CPU_THERMAL is not defined the thermal sensors are not even exposed consequently no cooling is possible. CPU_THERMAL eventually depends on CPUFREQ. CPPUFREQ is not the only cooling for CPU. The thermal shutdown for critical temperatures is another cooling solution which will currently not get enabled if CPU_THERMAL is not defined. Remove this dependency so as to have the last level of thermal protection working even without CPUFREQ defined. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-11-23thermal: ti-soc-thermal: add missing clk_put()Luis Henriques1-2/+3
This patch fixes the following Coccinelle error: ./drivers/thermal/ti-soc-thermal/ti-bandgap.c:1441:1-7: \ ERROR: missing clk_put; clk_get on line 1290 \ and execution via conditional on line 1298 Signed-off-by: Luis Henriques <henrix@camandro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-09-27thermal: Enhance thermal_zone_device_update for eventsSrinivas Pandruvada1-2/+2
Added one additional parameter to thermal_zone_device_update() to provide caller with an optional capability to specify reason. Currently this event is used by user space governor to trigger different processing based on event code. Also it saves an additional call to read temperature when the event is received. The following events are cuurently defined: - Unspecified event - New temperature sample - Trip point violated - Trip point changed - thermal device up and down - thermal device power capability changed Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27thermal: streamline get_trend callbacksSascha Hauer1-17/+8
The .get_trend callback in struct thermal_zone_device_ops has the prototype: int (*get_trend) (struct thermal_zone_device *, int, enum thermal_trend *); whereas the .get_trend callback in struct thermal_zone_of_device_ops has: int (*get_trend)(void *, long *); Streamline both prototypes and add the trip argument to the OF callback aswell and use enum thermal_trend * instead of an integer pointer. While the OF prototype may be the better one, this should be decided at framework level and not on OF level. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: linux-pm@vger.kernel.org Reviewed-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-05-17thermal: convert ti-thermal to use devm_thermal_zone_of_sensor_registerEduardo Valentin1-4/+1
This changes the driver to use the devm_ version of thermal_zone_of_sensor_register and cleans up the local points and unregister calls. Cc: Zhang Rui <rui.zhang@intel.com> Cc: linux-pm@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-kernel@vger.kernel.org Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2016-03-08thermal: ti-soc-thermal: clean up the error handling a bitDan Carpenter1-6/+4
We don't need to initialize "ret". We can move the IS_ERR() checks into the if condition instead of doing an assignment first. Also there is a check for "ret" when we know it is zero so we can remove that. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-09-29thermal: ti-soc-thermal: add OMAP36xx supportEduardo Valentin3-0/+79
Add OMAP36xx support to ti-soc-thermal driver. This chip is also unreliable. The data provided here is based on OMAP36xx TRM: http://www.ti.com/lit/ug/swpu177aa/swpu177aa.pdf Signed-off-by: Eduardo Valentin <edubezva@gmail.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-09-29ti-soc-thermal: implement omap3 supportPavel Machek5-0/+138
This adds support for OMAP3 chips to ti-soc-thermal. As requested by TI people, it is marked unreliable and warning is printed. Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-09-13thermal: ti-soc: Kconfig fix to avoid menu showing wronglyEduardo Valentin1-2/+0
Move the dependencies to menu, so we avoid showing it wrongly. Cc: Zhang Rui <rui.zhang@intel.com> Cc: linux-pm@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-09-13thermal: ti-soc: allow compile testEduardo Valentin1-4/+4
Adding COMPILE_TEST flag to ti-soc driver to facilitate maintenance. Cc: Zhang Rui <rui.zhang@intel.com> Cc: linux-pm@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-08-03thermal: consistently use int for temperaturesSascha Hauer1-5/+5
The thermal code uses int, long and unsigned long for temperatures in different places. Using an unsigned type limits the thermal framework to positive temperatures without need. Also several drivers currently will report temperatures near UINT_MAX for temperatures below 0°C. This will probably immediately shut the machine down due to overtemperature if started below 0°C. 'long' is 64bit on several architectures. This is not needed since INT_MAX °mC is above the melting point of all known materials. Consistently use a plain 'int' for temperatures throughout the thermal code and the drivers. This only changes the places in the drivers where the temperature is passed around as pointer, when drivers internally use another type this is not changed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Peter Feuerer <peter@piie.net> Cc: Punit Agrawal <punit.agrawal@arm.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Jean Delvare <jdelvare@suse.de> Cc: Peter Feuerer <peter@piie.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: linux-acpi@vger.kernel.org Cc: platform-driver-x86@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Darren Hart <dvhart@infradead.org> Cc: lm-sensors@lm-sensors.org Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-06-25Merge branch 'next' of ↵Linus Torvalds2-56/+53
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management updates from Zhang Rui: "Specifics: - enhance Thermal Framework with several new capabilities: * use power estimates * compute weights with relative integers instead of percentages * allow governors to have private data in thermal zones * export thermal zone parameters through sysfs Thanks to the ARM thermal team (Javi, Punit, KP). - introduce a new thermal governor: power allocator. First in kernel closed loop PI(D) controller for thermal control. Thanks to ARM thermal team. - enhance OF thermal to allow thermal zones to have sustainable power HW specification. Thanks to Punit. - introduce thermal driver for Intel Quark SoC x1000platform. Thanks to Ong, Boon Leong. - introduce QPNP PMIC temperature alarm driver. Thanks to Ivan T. I. - introduce thermal driver for Hisilicon hi6220. Thanks to kongxinwei. - enhance Exynos thermal driver to handle Exynos5433 TMU. Thanks to Chanwoo C. - TI thermal driver now has a better implementation for EOCZ bit. From Pavel M. - add id for Skylake processors in int340x processor thermal driver. - a couple of small fixes and cleanups." * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (36 commits) thermal: hisilicon: add new hisilicon thermal sensor driver dt-bindings: Document the hi6220 thermal sensor bindings thermal: of-thermal: add support for reading coefficients property thermal: support slope and offset coefficients thermal: power_allocator: round the division when divvying up power thermal: exynos: Add the support for Exynos5433 TMU thermal: cpu_cooling: Fix power calculation when CPUs are offline thermal: cpu_cooling: Remove cpu_dev update on policy CPU update thermal: export thermal_zone_parameters to sysfs thermal: cpu_cooling: Check memory allocation of power_table ti-soc-thermal: request temperature periodically if hw can't do that itself ti-soc-thermal: implement eocz bit to make driver useful on omap3 cleanup ti-soc-thermal thermal: remove stale THERMAL_POWER_ACTOR select thermal: Default OF created trip points to writable thermal: core: Add Kconfig option to enable writable trips thermal: x86_pkg_temp: drop const for thermal_zone_parameters of: thermal: Introduce sustainable power for a thermal zone thermal: add trace events to the power allocator governor thermal: introduce the Power Allocator governor ...
2015-05-08thermal: ti-soc-thermal: OMAP5: Implement Workaround for Errata i813Keerthy3-3/+45
DESCRIPTION Spurious Thermal Alert: Talert can happen randomly while the device remains under the temperature limit defined for this event to trig. This spurious event is caused by a incorrect re-synchronization between clock domains. The comparison between configured threshold and current temperature value can happen while the value is transitioning (metastable), thus causing inappropriate event generation. No spurious event occurs as long as the threshold value stays unchanged. Spurious event can be generated while a thermal alert threshold is modified in CONTROL_BANDGAP_THRESHOLD_MPU/GPU/CORE/DSPEVE/IVA_n. WORKAROUND Spurious event generation can be avoided by performing following sequence when the threshold is modified: 1. Mask the hot/cold events at the thermal IP level. 2. Modify Threshold. 3. Unmask the hot/cold events at the thermal IP level. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-20 22:21:57 +0000