summaryrefslogtreecommitdiff
path: root/drivers/thermal/qcom
AgeCommit message (Collapse)AuthorFilesLines
2019-11-07drivers: thermal: tsens: fix potential integer overflow on multiplyColin Ian King1-1/+1
Currently a multiply operation is being performed on two int values and the result is being assigned to a u64, presumably because the end result is expected to be probably larger than an int. However, because the multiply is an int multiply one can get overflow. Avoid the overflow by casting degc to a u64 to force a u64 multiply. Also use div_u64 for the divide as suggested by Daniel Lezcano. Addresses-Coverity: ("Unintentional integer overflow") Fixes: fbfe1a042cfd ("drivers: thermal: tsens: Add interrupt support") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Link: https://lore.kernel.org/r/20191101100035.25502-1-colin.king@canonical.com
2019-11-07thermal: qcom: tsens-v1: Fix kfree of a non-pointer valueColin Ian King1-3/+1
Currently the kfree of pointer qfprom_cdata is kfreeing an error value that has been cast to a pointer rather than a valid address. Fix this by removing the kfree. Fixes: 95ededc17e4e ("thermal: qcom: tsens-v1: Add support for MSM8956 and MSM8976") Signed-off-by: Colin Ian King <colin.king@canonical.com> Tested-by: AngeloGioacchino Del Regno <kholk11@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191022111806.23143-1-colin.king@canonical.com
2019-11-07thermal: qcom: tsens-v1: Add support for MSM8956 and MSM8976AngeloGioacchino Del Regno3-2/+174
Add support for reading calibrated value from thermistors in MSM8956, MSM8976 and their APQ variants. Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20191005104133.30297-2-kholk11@gmail.com
2019-11-07drivers: thermal: tsens: Add interrupt supportAmit Kucheria6-63/+669
Depending on the IP version, TSENS supports upper, lower and critical threshold interrupts. We only add support for upper and lower threshold interrupts for now. TSENSv2 has an irq [status|clear|mask] bit tuple for each sensor while earlier versions only have a single bit per sensor to denote status and clear. These differences are handled transparently by the interrupt handler. At each interrupt, we reprogram the new upper and lower threshold in the .set_trip callback. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/7508ba143f144407e5dd546107ddae65c380a76f.1572526427.git.amit.kucheria@linaro.org
2019-11-07drivers: thermal: tsens: Create function to return sign-extended temperatureAmit Kucheria1-14/+35
Hide the details of how to convert values read from TSENS HW to mCelsius behind a function. All versions of the IP can be supported as a result. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/0689917475cf83b7e01f6978504fd37352a5e3ca.1572526427.git.amit.kucheria@linaro.org
2019-11-07drivers: thermal: tsens: Add debugfs supportAmit Kucheria3-0/+91
Dump some basic version info and sensor details into debugfs. Example from qcs404 below: --(/sys/kernel/debug) $ ls tsens/ 4a9000.thermal-sensor version --(/sys/kernel/debug) $ cat tsens/version 1.4.0 --(/sys/kernel/debug) $ cat tsens/4a9000.thermal-sensor/sensors max: 11 num: 10 id slope offset ------------------------ 0 3200 404000 1 3200 404000 2 3200 404000 3 3200 404000 4 3200 404000 5 3200 404000 6 3200 404000 7 3200 404000 8 3200 404000 9 3200 404000 Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/16e39c1bbfc18b5cf6274620cd72cc63205f53a5.1572526427.git.amit.kucheria@linaro.org
2019-11-07drivers: thermal: tsens: Add __func__ identifier to debug statementsAmit Kucheria2-7/+7
Printing the function name when enabling debugging makes logs easier to read. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/18717de35f31098d3ebc12564c2767b6d54d37d8.1572526427.git.amit.kucheria@linaro.org
2019-11-07drivers: thermal: tsens: Simplify code flow in tsens_probeAmit Kucheria1-5/+3
Move platform_set_drvdata up to avoid an extra 'if (ret)' check after the call to tsens_register. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/184422dcc1c12553e71a58c62e01425fd7d1172a.1572526427.git.amit.kucheria@linaro.org
2019-11-07drivers: thermal: tsens: Get rid of id field in tsens_sensorAmit Kucheria4-21/+20
There are two fields - id and hw_id - to track what sensor an action was to performed on. This was because the sensors connected to a TSENS IP might not be contiguous i.e. 1, 2, 4, 5 with 3 being skipped. This causes confusion in the code which uses hw_id sometimes and id other times (tsens_get_temp, tsens_get_trend). Switch to only using the hw_id field to track the physical ID of the sensor. When we iterate through all the sensors connected to an IP block, we use an index i to loop through the list of sensors, and then return the actual hw_id that is registered on that index. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/30206cd47d303d2dcaef87f4e3c7173481a0bddd.1572526427.git.amit.kucheria@linaro.org
2019-08-28drivers: thermal: qcom: tsens: Fix memory leak from qfprom readSrinivas Kandagatla4-2/+14
memory returned as part of nvmem_read via qfprom_read should be freed by the consumer once done. Existing code is not doing it so fix it. Below memory leak detected by kmemleak [<ffffff80088b7658>] kmemleak_alloc+0x50/0x84 [<ffffff80081df120>] __kmalloc+0xe8/0x168 [<ffffff80086db350>] nvmem_cell_read+0x30/0x80 [<ffffff8008632790>] qfprom_read+0x4c/0x7c [<ffffff80086335a4>] calibrate_v1+0x34/0x204 [<ffffff8008632518>] tsens_probe+0x164/0x258 [<ffffff80084e0a1c>] platform_drv_probe+0x80/0xa0 [<ffffff80084de4f4>] really_probe+0x208/0x248 [<ffffff80084de2c4>] driver_probe_device+0x98/0xc0 [<ffffff80084dec54>] __device_attach_driver+0x9c/0xac [<ffffff80084dca74>] bus_for_each_drv+0x60/0x8c [<ffffff80084de634>] __device_attach+0x8c/0x100 [<ffffff80084de6c8>] device_initial_probe+0x20/0x28 [<ffffff80084dcbb8>] bus_probe_device+0x34/0x7c [<ffffff80084deb08>] deferred_probe_work_func+0x6c/0x98 [<ffffff80080c3da8>] process_one_work+0x160/0x2f8 Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Acked-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284Thomas Gleixner1-9/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 and only version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 294 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.825281744@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-28Revert "drivers: thermal: tsens: Add new operation to check if a sensor is ↵Eduardo Valentin5-22/+0
enabled" This reverts commit 3e6a8fb3308419129c7a52de6eb42feef5a919a0. Cc: Andy Gross <agross@kernel.org> Cc: David Brown <david.brown@linaro.org> Cc: Amit Kucheria <amit.kucheria@linaro.org> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Suggested-by: Amit Kucheria <amit.kucheria@linaro.org> Reported-by: Andy Gross <andygro@gmail.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner2-0/+2
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-16Merge branch 'next' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management updates from Zhang Rui: - Remove the 'module' Kconfig option for thermal subsystem framework because the thermal framework are required to be ready as early as possible to avoid overheat at boot time (Daniel Lezcano) - Fix a bug that thermal framework pokes disabled thermal zones upon resume (Wei Wang) - A couple of cleanups and trivial fixes on int340x thermal drivers (Srinivas Pandruvada, Zhang Rui, Sumeet Pawnikar) * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: drivers: thermal: processor_thermal: Downgrade error message mlxsw: Remove obsolete dependency on THERMAL=m hwmon/drivers/core: Simplify complex dependency thermal/drivers/core: Fix typo in the option name thermal/drivers/core: Remove depends on THERMAL in Kconfig thermal/drivers/core: Remove module unload code thermal/drivers/core: Remove the module Kconfig's option thermal: core: skip update disabled thermal zones after suspend thermal: make device_register's type argument const thermal: intel: int340x: processor_thermal_device: simplify to get driver data thermal/int3403_thermal: favor _TMP instead of PTYP
2019-05-14drivers: thermal: tsens: Move calibration constants to header fileAmit Kucheria2-5/+5
This will allow calibration routines to correctly include the constants from anywhere and allow more code sharing. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-14drivers: thermal: tsens: Add generic support for TSENS v1 IPAmit Kucheria4-1/+202
qcs404 has a single TSENS IP block with 10 sensors. It uses version 1.4 of the TSENS IP, functionality for which is encapsulated inside the qcom,tsens-v1 compatible. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-14drivers: thermal: tsens: Common get_temp() learns to do ADC conversionAmit Kucheria1-4/+9
get_temp() learns to return temperature regardless of whether it is returned as ADC code or direct temperature. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-14drivers: thermal: tsens: Move get_temp_tsens_v2 to allow sharingAmit Kucheria3-36/+37
Just rename the function and move it to allow code sharing with future versions of TSENS IP Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-14drivers: thermal: tsens: simplify get_temp_tsens_v2 routineAmit Kucheria1-38/+17
The current implementation is based on an algorithm published in the docs. Instead of reading the temperature thrice w/o any explanation, improve the algorithm. This will become the basis for a common get_temp routine in the future. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-14drivers: thermal: tsens: Introduce IP-specific max_sensor countAmit Kucheria4-2/+6
The IP can support 'm' sensors while the platform can enable 'n' sensors of the 'm' where n <= m. Track maximum sensors supported by the IP so that we can correctly track what subset of the sensors are supported on the platform. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-14drivers: thermal: tsens: change data type for sensor IDsAmit Kucheria1-2/+2
The IDs cannot be negative, fix the data type. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-14drivers: thermal: tsens: Add new operation to check if a sensor is enabledAmit Kucheria5-0/+22
is_sensor_enabled() checks if the sensors are enabled on this platform. It is possible that the SoC might choose not to enable all the sensors that the IP block is capable of supporting. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-14drivers: thermal: tsens: Don't print error message on -EPROBE_DEFERAmit Kucheria1-1/+2
We print a calibration failure message on -EPROBE_DEFER from nvmem/qfprom as follows: [ 3.003090] qcom-tsens 4a9000.thermal-sensor: version: 1.4 [ 3.005376] qcom-tsens 4a9000.thermal-sensor: tsens calibration failed [ 3.113248] qcom-tsens 4a9000.thermal-sensor: version: 1.4 This confuses people when, in fact, calibration succeeds later when nvmem/qfprom device is available. Don't print this message on a -EPROBE_DEFER. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-14drivers: thermal: tsens: Save reference to the device pointer and use itAmit Kucheria1-7/+8
Code cleanup making it easier to read Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-14drivers: thermal: tsens: Introduce reg_fields to deal with register descriptionAmit Kucheria5-58/+370
As we add support for newer versions of the TSENS IP, the current approach isn't scaling because registers and bitfields get moved around, requiring platform-specific hacks in the code. By moving to regmap, we can hide the register level differences away from the code. Define a common set of registers and bit-fields that we care about across the various tsens IP versions. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13drivers: thermal: tsens: Merge tsens-8974 into tsens-v0_1Amit Kucheria4-239/+236
8974 and 8916 have the same version of the TSENS IP. Merge the files to allow for better code reuse. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13drivers: thermal: tsens: Rename constants to prepare to merge with tsens-8974Amit Kucheria1-44/+44
Some #defines in tsens-v_0_1.c clash with those in tsens-8974.c. Prefix them with 8916 to avoid the clash so we can merge the two files. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13drivers: thermal: tsens: Rename tsens-8916 to prepare to merge with tsens-8974Amit Kucheria2-1/+1
8916 and 8974 use v0.1.0 of the TSENS IP. Rename tsens-8916 to prepare it for merging with tsens-8974 in a later commit. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13drivers: thermal: tsens: Function prototypes should have argument namesAmit Kucheria1-12/+12
check_patch complains a lot as follows: WARNING: function definition argument 'struct tsens_priv *' should also have an identifier name + int (*init)(struct tsens_priv *); Fix it. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13drivers: thermal: tsens: Use consistent names for variablesAmit Kucheria1-3/+3
tsens_get_temp() uses the name 'data' for the void pointer, use the same in tsens_get_trend() for consistency. Remove a stray space while we're at it. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13drivers: thermal: tsens: Rename variable tmdevAmit Kucheria7-132/+131
tmdev seems to imply that this is a device pointer when in fact it is just private platform data for each tsens device. Rename it to priv improve code readability. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13drivers: thermal: tsens: Rename tsens_deviceAmit Kucheria7-35/+35
Rename to tsens_priv to denote that it is private data for each tsens instance. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13drivers: thermal: tsens: Rename tsens_dataAmit Kucheria6-10/+10
Rename to tsens_plat_data to denote that it is platform-data passed in at compile-time. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13drivers: thermal: tsens: Document the data structuresAmit Kucheria1-3/+28
Describe how the TSENS device and the various sensors connected to it are described in the driver Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-06thermal/drivers/core: Remove depends on THERMAL in KconfigDaniel Lezcano1-1/+0
The dependency on the THERMAL option to be set is already there implicitly by the "if THERMAL" conditionnal option. The sub Kconfigs do not have to check against the THERMAL option as they are called from a Kconfig block which is enabled by the conditionnal option. Remove the useless "depends on THERMAL" in the Kconfigs. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2019-02-20thermal/qcom/tsens-common : fix possible object reference leakPeng Hao1-10/+23
of_find_device_by_node() takes a reference to the struct device when it finds a match via get_device. We also should make sure to drop the reference to the device taken by of_find_device_by_node() when returning error. Signed-off-by: Peng Hao <peng.hao2@zte.com.cn> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-01-05Merge branch 'next' of ↵Linus Torvalds3-0/+477
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management updates from Zhang Rui: - Add locking for cooling device sysfs attribute in case the cooling device state is changed by userspace and thermal framework simultaneously. (Thara Gopinath) - Fix a problem that passive cooling is reset improperly after system suspend/resume. (Wei Wang) - Cleanup the driver/thermal/ directory by moving intel and qcom platform specific drivers to platform specific sub-directories. (Amit Kucheria) - Some trivial cleanups. (Lukasz Luba, Wolfram Sang) * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: thermal/intel: fixup for Kconfig string parsing tightening up drivers: thermal: Move QCOM_SPMI_TEMP_ALARM into the qcom subdir drivers: thermal: Move various drivers for intel platforms into a subdir thermal: Fix locking in cooling device sysfs update cur_state Thermal: do not clear passive state during system sleep thermal: zx2967_thermal: simplify getting .driver_data thermal: st: st_thermal: simplify getting .driver_data thermal: spear_thermal: simplify getting .driver_data thermal: rockchip_thermal: simplify getting .driver_data thermal: int340x_thermal: int3400_thermal: simplify getting .driver_data thermal: remove unused function parameter
2019-01-02thermal: tsens: qcom: do not create duplicate regmap debugfs entriesSrinivas Kandagatla1-2/+10
Regmap would use device name to create debugfs entries. If the device has multiple regmaps it is recommended to use name field in regmap_config. Fix this by providing name to the regmap configs correctly. Without this patch we would see below error on DB820c. qcom-tsens 4a9000.thermal-sensor: Failed to create 4a9000.thermal-sensor debugfs directory Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Acked-by: Amit Kucheria <amit.kucheria@linaro.org> Tested-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-12-07drivers: thermal: Move QCOM_SPMI_TEMP_ALARM into the qcom subdirAmit Kucheria3-0/+477
This cleans up the directory a bit allowing just one place to look for thermal related drivers for QCOM platforms instead of being scattered in the root directory and the qcom/ subdirectory. Compile-tested with ARCH=arm64 defconfig and the driver explicitly enabled with menuconfig. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2018-10-22thermal: tsens: Check if the IP is correctly enabled by firmwareAmit Kucheria1-0/+17
The SROT registers are initialised by the secure firmware at boot. We don't have write access to the registers. Check if the block is enabled before continuing. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-10-22thermal: tsens: Pass register offsets as private dataAmit Kucheria5-0/+16
Registers have moved around across TSENS generations. For example, the CTRL register was at offset 0x0 in the SROT region on msm8916 but is at offset 0x4 in newer v2 based TSENS HW blocks. Allow passing offsets of important registers so that we can continue to use common functions. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-10-22thermal: tsens: Add the SROT address mapAmit Kucheria2-2/+13
On platforms whose device trees specify two address spaces for TSENS, the second one points to the SROT registers. Initialise the SROT map on those platforms. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-10-22thermal: tsens: Rename map field in order to add a second address mapAmit Kucheria4-28/+27
The TSENS driver currently only uses a limited set of registers from the TM address space. So it was ok to map just that set of registers and call it "map". We'd now like to map a second set: SROT registers to introduce new functionality. Rename the "map" field to a more appropriate "tm_map". The 8960 doesn't have a clear split between TM and SROT registers. To avoid complicating the data structure, it will switchover to using tm_map for its maps. There is no functional change with this patch. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-10-22thermal: tsens: Get rid of dead codeAmit Kucheria1-5/+0
hw_id is dynamically allocated but not used anywhere. Get rid of dead code. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-10-22thermal: tsens: Add SPDX license identifiersAmit Kucheria6-59/+7
The TSENS drivers use a GPL-2.0 license. Replace with equivalent SPDX tags and delete the full license text. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-10-22thermal: tsens: Prepare 8916 and 8974 tsens to use SROT and TM address spaceAmit Kucheria1-2/+3
We've already converted over the devicetree of platforms using v2 version of the TSENS IP to use two address spaces. Now prepare to convert over the 8916 and 8974 platforms to use separate SROT and TM address spaces. This patch will work with device trees with one or two address spaces because we set the tm_offset in commit 5b1283984fa3 ("thermal: tsens: Add support to split up register address space into two"). Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-07-27thermal: tsens: Fix negative temperature reportingAmit Kucheria1-8/+5
The current code will always return 0xffffffff in case of negative temperatures due to a bug in how the binary sign extension is being done. Use sign_extend32() instead. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-07-27thermal: tsens: switch from of_iomap() to devm_ioremap_resource()Amit Kucheria1-6/+7
devm_ioremap_resources() automatically requests resources (so that the I/O region shows up in /proc/iomem) and devm_ wrappers do better error handling and unmapping of the I/O region when needed. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-07-27thermal: tsens: Rename variableAmit Kucheria2-8/+8
We're actually reading the temperature from the status register. Fix the variable name to reflect that. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-07-27thermal: tsens: Add generic support for TSENS v2 IPAmit Kucheria3-1/+12
SDM845 uses v2 of the TSENS IP block but the get_temp() function appears to be identical across v2.x.y in code seen so far. We use the generic get_temp() function defined as part of ops_generic_v2. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-12 02:54:19 +0000