summaryrefslogtreecommitdiff
path: root/drivers/thermal/armada_thermal.c
AgeCommit message (Collapse)AuthorFilesLines
2023-09-29thermal: armada: Convert to platform remove callback returning voidUwe Kleine-König1-4/+2
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-09-05thermal: Use thermal_tripless_zone_device_register()Rafael J. Wysocki1-2/+3
All of the remaining callers of thermal_zone_device_register() can use thermal_tripless_zone_device_register(), so make them do so in order to allow the former to be dropped. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
2023-06-26thermal/drivers/armada: Add support for AP807 thermal dataAlex Leibovich1-2/+30
Add support for the AP807 die thermal data. This is the same as AP806, except for the coefficients. ap807 values taken from TSENSE_ADC_16FFC spec, which says: T(in Celsius) = T(code)*TSENE_GAIN+TSENE_OFFSET where in default: TSENE_OFFSET = 128.9 TSENE_GAIN = 0.394 Signed-off-by: Alex Leibovich <alexl@marvell.com> Tested-by: sa_ip-sw-jenkins <sa_ip-sw-jenkins@marvell.com> Reviewed-by: Stefan Chulski <stefanc@marvell.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/E1qA7yU-00Ea4u-Je@rmk-PC.armlinux.org.uk
2023-03-03thermal: Remove debug or error messages in get_temp() opsDaniel Lezcano1-8/+2
Some get_temp() ops implementation are showing an error or a debug message if the reading of the sensor fails. The debug message is already displayed from the call site of this ops. So we can remove it. On the other side, the error should not be displayed because in production that can raise tons of messages. Finally, some drivers are showing a debug message with the temperature, this is also accessible through the trace from the core code in the temperature_update() function. Another benefit is the dev_* messages are accessing the thermal zone device field from the structure, so we encapsulate even more the code by preventing these accesses. Remove those messages. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> #Armada Acked-by: Florian Fainelli <f.fainelli@gmail.com> #brcmstb_thermal.c Acked-by: Heiko Stuebner <heiko@sntech.de> #rockchip Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-03-03thermal/core: Use the thermal zone 'devdata' accessor in thermal located driversDaniel Lezcano1-2/+2
The thermal zone device structure is exposed to the different drivers and obviously they access the internals while that should be restricted to the core thermal code. In order to self-encapsulate the thermal core code, we need to prevent the drivers accessing directly the thermal zone structure and provide accessor functions to deal with. Use the devdata accessor introduced in the previous patch. No functional changes intended. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> #R-Car Acked-by: Mark Brown <broonie@kernel.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> #MediaTek auxadc and lvts Reviewed-by: Balsam CHIHI <bchihi@baylibre.com> #Mediatek lvts Reviewed-by: Adam Ward <DLG-Adam.Ward.opensource@dm.renesas.com> #da9062 Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> #spread Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> #sun8i_thermal Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> #Broadcom Reviewed-by: Dhruva Gole <d-gole@ti.com> # K3 bandgap Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Heiko Stuebner <heiko@sntech.de> #rockchip Reviewed-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> #uniphier Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-15thermal: Remove core header inclusion from driversDaniel Lezcano1-2/+0
As the name states "thermal_core.h" is the header file for the core components of the thermal framework. Too many drivers are including it. Hopefully the recent cleanups helped to self encapsulate the code a bit more and prevented the drivers to need this header. Remove this inclusion in every place where it is possible. Some other drivers did a confusion with the core header and the one exported in linux/thermal.h. They include the former instead of the latter. The changes also fix this. The tegra/soctherm driver still remains as it uses an internal function which need to be replaced. The Intel HFI driver uses the netlink internal framework core and should be changed to prevent to deal with the internals. No functional changes intended. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> # armada_thermal.c Reviewed-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> # uniphier_thermal.c Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> # rcar_gen3_thermal.c Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> # amlogic_thermal.c Acked-by: Florian Fainelli <f.fainelli@gmail.com> # bcm2835_thermal.c Acked-by: Thierry Reding <treding@nvidia.com> # tegra30-tsensor.c Link: https://lore.kernel.org/r/20230206153432.1017282-1-daniel.lezcano@linaro.org Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-01-24thermal/drivers/armada: Use the thermal_zone_get_crit_temp()Daniel Lezcano1-23/+15
The driver browses the trip point to find out the critical trip temperature. However the function thermal_zone_get_crit_temp() does already that, so the routine is pointless in the driver. Use thermal_zone_get_crit_temp() instead of inspecting all the trip points. In addition, the hysteresis value is set to zero. A critical trip point does not have a hysteresis. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20230118222610.186088-1-daniel.lezcano@linaro.org
2023-01-18thermal/drivers/armada: Use devm_platform_get_and_ioremap_resource()ye xingchen1-3/+1
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn> Link: https://lore.kernel.org/r/202301181634379503534@zte.com.cn Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2023-01-06thermal/drivers/armada: Use strscpy() to instead of strncpy()Xu Panda1-2/+1
The implementation of strscpy() is more robust and safer. That's now the recommended way to copy NUL-terminated strings. Signed-off-by: Xu Panda <xu.panda@zte.com.cn> Signed-off-by: Yang Yang <yang.yang29@zte.com> Link: https://lore.kernel.org/r/202212280945491860150@zte.com.cn Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
2023-01-06thermal/drivers/armada: Use generic thermal_zone_get_trip() functionDaniel Lezcano1-18/+19
The thermal framework gives the possibility to register the trip points with the thermal zone. When that is done, no get_trip_* ops are needed and they can be removed. Convert ops content logic into generic trip points and register them with the thermal zone. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20221003092602.1323944-15-daniel.lezcano@linaro.org
2022-08-17thermal/drivers/armada: Switch to new of APIDaniel Lezcano1-6/+6
The thermal OF code has a new API allowing to migrate the OF initialization to a simpler approach. The ops are no longer device tree specific and are the generic ones provided by the core code. Convert the ops to the thermal_zone_device_ops format and use the new API to register the thermal zone with these generic ops. Signed-off-by: Daniel Lezcano <daniel.lezcano@linexp.org> Link: https://lore.kernel.org/r/20220804224349.1926752-15-daniel.lezcano@linexp.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2020-06-29thermal: Explicitly enable non-changing thermal zone devicesAndrzej Pietrasiewicz1-0/+6
Some thermal zone devices never change their state, so they should be always enabled. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200629122925.21729-9-andrzej.p@collabora.com
2020-01-31thermal: armada: remove unused TO_MCELSIUS macroAkinobu Mita1-2/+0
This removes unused TO_MCELSIUS() macro. Link: http://lkml.kernel.org/r/1576386975-7941-12-git-send-email-akinobu.mita@gmail.com Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Amit Kucheria <amit.kucheria@verdurent.com> Cc: Andy Shevchenko <andy@infradead.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Darren Hart <dvhart@infradead.org> Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Jean Delvare <jdelvare@suse.com> Cc: Jens Axboe <axboe@fb.com> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Keith Busch <kbusch@kernel.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Luca Coelho <luciano.coelho@intel.com> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Sujith Thomas <sujith.thomas@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-27thermal: armada: Clear reset in armadaxp_initZak Hays1-0/+3
The reset bit needs to be cleared in the init sequence otherwise it holds the block in reset. Signed-off-by: Zachary Hays <zhays@lexmark.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/BN8PR10MB33797EECAC557B5018A0A6628C580@BN8PR10MB3379.namprd10.prod.outlook.com
2020-01-27thermal: armada: Fix register offsets for AXPZak Hays1-1/+1
As shown in its device tree, Armada XP has the control1 register at 0x184d0, not 0x182d0. Signed-off-by: Zachary Hays <zhays@lexmark.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/BN8PR10MB337990B7688320D736760BB68C580@BN8PR10MB3379.namprd10.prod.outlook.com
2019-08-28thermal: armada: Fix -Wshift-negative-valueNathan Huckleberry1-3/+2
Clang produces the following warning drivers/thermal/armada_thermal.c:270:33: warning: shifting a negative signed value is undefined [-Wshift-negative-value] 1 warning reg &= ~CONTROL1_TSEN_AVG_MASK << CONTROL1_TSEN_AVG_SHIFT; generated . ~~~~~~~~~~~~~~~~~~~~~~~ ^ CONTROL1_TSEN_AVG_SHIFT is defined to be zero. Since shifting by zero does nothing this variable can be removed. Cc: clang-built-linux@googlegroups.com Link: https://github.com/ClangBuiltLinux/linux/issues/532 Signed-off-by: Nathan Huckleberry <nhuck@google.com> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282Thomas Gleixner1-10/+1
Based on 1 normalized pattern(s): this software is licensed under the terms of the gnu general public license version 2 as published by the free software foundation and may be copied distributed and modified under those terms this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 285 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.642774971@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-05Merge branch 'linus' of ↵Linus Torvalds1-9/+271
git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal Pull thermal SoC updates from Eduardo Valentin: - Tegra DT binding documentation for Tegra194 - Armada now supports ap806 and cp110 - RCAR thermal now supports R8A774C0 and R8A77990 - Fixes on thermal_hwmon, IMX, generic-ADC, ST, RCAR, Broadcom, Uniphier, QCOM, Tegra, PowerClamp, and Armada thermal drivers. * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: (22 commits) thermal: generic-adc: Fix adc to temp interpolation thermal: rcar_thermal: add R8A77990 support dt-bindings: thermal: rcar-thermal: add R8A77990 support thermal: rcar_thermal: add R8A774C0 support dt-bindings: thermal: rcar-thermal: add R8A774C0 support dt-bindings: cp110: document the thermal interrupt capabilities dt-bindings: ap806: document the thermal interrupt capabilities MAINTAINERS: thermal: add entry for Marvell MVEBU thermal driver thermal: armada: add overheat interrupt support thermal: st: fix Makefile typo thermal: uniphier: Convert to SPDX identifier thermal/intel_powerclamp: Change to use DEFINE_SHOW_ATTRIBUTE macro thermal: tegra: soctherm: Change to use DEFINE_SHOW_ATTRIBUTE macro dt-bindings: thermal: tegra-bpmp: Add Tegra194 support thermal: imx: save one condition block for normal case of nvmem initialization thermal: imx: fix for dependency on cpu-freq thermal: tsens: qcom: do not create duplicate regmap debugfs entries thermal: armada: Use PTR_ERR_OR_ZERO in armada_thermal_probe_legacy() dt-bindings: thermal: rcar-gen3-thermal: All variants use 3 interrupts thermal: broadcom: use devm_thermal_zone_of_sensor_register ...
2019-01-02thermal: armada: add overheat interrupt supportMiquel Raynal1-1/+269
The IP can manage to trigger interrupts on overheat situation from all the sensors. However, the interrupt source changes along with the last selected source (ie. the last read sensor), which is an inconsistent behavior. Avoid possible glitches by always selecting back only one channel which will then be referenced as the "overheat_sensor" (arbitrarily: the first in the DT which has a critical trip point filled in). It is possible that the scan of all thermal zone nodes did not bring a critical trip point from which the overheat interrupt could be configured. In this case just complain but do not fail the probe. Also disable sensor switch during overheat situations because changing the channel while the system is too hot could clear the overheat state by changing the source while the temperature is still very high. Even if the overheat state is not declared, overheat interrupt must be cleared by reading the DFX interrupt cause _after_ the temperature has fallen down to the low threshold, otherwise future possible interrupts would not be served. A work polls the corresponding register until the overheat flag gets cleared in this case. Suggested-by: David Sniatkiwicz <davidsn@marvell.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-01-02thermal: armada: Use PTR_ERR_OR_ZERO in armada_thermal_probe_legacy()YueHaibing1-8/+2
Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-12-05thermal: armada: constify thermal_zone_of_device_ops structureJulia Lawall1-1/+1
The thermal_zone_of_device_ops structure can be const as it is only passed as the last argument of devm_thermal_zone_of_sensor_register and the corresponding parameter is declared as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-12-04thermal: armada: fix legacy resource fixupRussell King1-13/+11
When the armada thermal module is inserted, removed and then reinserted, the system panics as per the messages below. The reason is that "edit" a live resource in the resource tree twice, and end up with it pointing to some other hardware. Editing live resources (resources that are part of the registered resource tree) is not permissible - the resource tree is an ordered set of resources, sorted by start address, and when a new resource is inserted, it is validated that it (a) fits within its parent resource and (b) does not overlap a neighbouring resource. Get rid of this resource editing. We can instead adjust the return value from ioremap() as ioremap() deals with the creation of page- based mappings - provided the adjustment does not cross a page boundary. SError Interrupt on CPU1, code 0xbf000000 -- SError CPU: 1 PID: 2749 Comm: modprobe Not tainted 4.19.0+ #175 Hardware name: Marvell 8040 MACCHIATOBin Double shot (DT) pstate: 20400085 (nzCv daIf +PAN -UAO) pc : regmap_mmio_read+0x3c/0x60 lr : regmap_mmio_read+0x3c/0x60 sp : ffffff800d453900 x29: ffffff800d453900 x28: ffffff800096a1d0 x27: 0000000000000100 x26: ffffff80009696d8 x25: ffffff8000969000 x24: ffffffc13a588918 x23: ffffffc13a9a28a8 x22: ffffff800d4539dc x21: 0000000000000084 x20: ffffff800d4539dc x19: ffffffc13a5d5480 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000030 x11: 0101010101010101 x10: 7f7f7f7f7f7f7f7f x9 : 0000000000000000 x8 : ffffffc13a5d5a80 x7 : 0000000000000000 x6 : 000000000000003f x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffffff800851be70 x2 : ffffff800851bd60 x1 : ffffff800d492ff8 x0 : 0000000000000000 Kernel panic - not syncing: Asynchronous SError Interrupt CPU: 1 PID: 2749 Comm: modprobe Not tainted 4.19.0+ #175 Hardware name: Marvell 8040 MACCHIATOBin Double shot (DT) Call trace: dump_backtrace+0x0/0x158 show_stack+0x14/0x1c dump_stack+0x90/0xb0 panic+0x128/0x298 print_tainted+0x0/0xa8 arm64_serror_panic+0x74/0x80 do_serror+0x5c/0xb8 el1_error+0xb4/0x144 regmap_mmio_read+0x3c/0x60 _regmap_bus_reg_read+0x18/0x20 _regmap_read+0x64/0x180 regmap_read+0x44/0x6c armada_ap806_init+0x24/0x5c [armada_thermal] armada_thermal_probe+0x2c8/0x37c [armada_thermal] platform_drv_probe+0x4c/0xb0 really_probe+0x21c/0x2b4 driver_probe_device+0x58/0xfc __driver_attach+0xd4/0xd8 bus_for_each_dev+0x50/0xa0 driver_attach+0x20/0x28 bus_add_driver+0x1c4/0x228 driver_register+0x6c/0x124 __platform_driver_register+0x4c/0x54 armada_thermal_driver_init+0x20/0x1000 [armada_thermal] do_one_initcall+0x30/0x204 do_init_module+0x5c/0x1d4 load_module+0x1a88/0x212c __se_sys_finit_module+0xa0/0xac __arm64_sys_finit_module+0x1c/0x24 el0_svc_common+0x94/0xf0 el0_svc_handler+0x24/0x80 el0_svc+0x8/0x3c0 SMP: stopping secondary CPUs Kernel Offset: disabled CPU features: 0x0,21806000 Memory Limit: none Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Tested-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-12-04thermal: armada: fix legacy validity test senseRussell King1-1/+1
Commit 8c0e64ac4075 ("thermal: armada: get rid of the ->is_valid() pointer") removed the unnecessary indirection through a function pointer, but in doing so, also removed the negation operator too: - if (priv->data->is_valid && !priv->data->is_valid(priv)) { + if (armada_is_valid(priv)) { which results in: armada_thermal f06f808c.thermal: Temperature sensor reading not valid armada_thermal f2400078.thermal: Temperature sensor reading not valid armada_thermal f4400078.thermal: Temperature sensor reading not valid at boot, or whenever the "temp" sysfs file is read. Replace the negation operator. Fixes: 8c0e64ac4075 ("thermal: armada: get rid of the ->is_valid() pointer") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-10-22thermal: armada: fix a test in probe()Dan Carpenter1-2/+2
The platform_get_resource() function doesn't return error pointers, it returns NULL on error. Fixes: 3d4e51844a4e ("thermal: armada: convert driver to syscon register accesses") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-08-01thermal: armada: fix copy-paste error in armada_thermal_probe()Wei Yongjun1-1/+1
The return value from devm_kzalloc() is not checked correctly. The test is done against a wrong variable. Fix it. Fixes: e72f03ef2543 ("thermal: armada: use the resource managed registration helper alternative") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-07-27thermal: armada: get rid of the ->is_valid() pointerMiquel Raynal1-9/+4
The implementation of armada_is_valid() is very simple and is the same across all the versions of the IP since the ->is_valid_bit has been introduced. Simplify the structure by getting rid of the function pointer and calling directly the function. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-07-27thermal: armada: move validity check out of the read functionMiquel Raynal1-7/+7
Sensor selection when using multiple sensors already checks for the sensor validity. Move it to the legacy ->get_temp() hook, where it is still needed. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-07-27thermal: armada: remove sensors validity from the IP initializationMiquel Raynal1-6/+3
When using new bindings with multiple sensors, sensor validity is checked twice because sensor selection also checks for the validity. Remove the redundant call from the IP initialization helper and move it to the legacy probe section where it is still needed. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-07-27thermal: armada: add multi-channel sensors supportMiquel Raynal1-21/+114
MVEBU thermal IP supports multiple channels. Each channel may have several sensors but for now each channel is wired to only one thermal sensor. The first channel always points to the so called internal sensor, within the thermal IP. There is usually one more channel (with one sensor each time) per CPU. The code has been written to support possible evolutions of the ap806 IP that would embed more CPUs and thus more channels to select. Each channel should be referenced in the device tree as an independent thermal zone. Add the possibility to read each of these sensors through sysfs by registering all the sensors (translated in "thermal_zone"). Also add a mutex on these accesses to avoid read conflicts (only one channel/sensor may be selected and read at a time). Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-07-27thermal: armada: use the resource managed registration helper alternativeMiquel Raynal1-22/+100
Current use of thermal_zone_device_register() triggers a warning at boot and should be replaced by devm_thermal_zone_of_sensor_register(). This allows better handling of multiple thermal zones for later multi-sensors support. Also change the driver data to embed a new structure to make the difference between legacy data (which needs to be cleaned) and syscon-related data. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-07-27thermal: armada: convert driver to syscon register accessesMiquel Raynal1-70/+129
Until recently, only one register was referenced in MVEBU thermal IP node. Recent changes added a second entry pointing to another register right next to it. We cannot know for sure that we will not have to access other registers. That will be actually the case when overheat interrupt feature will come, where it will be needed to access DFX registers in the same area. This approach is not scalable so instead of adding consinuously memory areas in the DT (and change the DT bindings, while keeping backward compatibility), move the thermal node into a wider syscon from which it will be possible to also configure the thermal interrupt. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-07-27thermal: armada: average over samples to avoid glitchesMiquel Raynal1-0/+25
Configure the sample frequency and number of averaged samples. This is needed for two reasons: 1/ To be bootloader independent. 2/ To prepare the introduction of multi-sensors support by preventing inconsistencies when reading temperatures that could be a mean of samples took from different sensors. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-07-27thermal: armada: dissociate a380 and cp110 ->init() hooksMiquel Raynal1-1/+7
Until now, Armada 380 and CP110 could share the same ->init() function because their use was identical. Prepare the support of multi-sensors support and overheat interrupt feature by separating the initialization paths before they actually diverge. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-07-27thermal: armada: rename the initialization routineMiquel Raynal1-20/+20
Calling a hook ->init_sensor() while what is initialized is the IP itself and not the sensors is misleading. Rename the hook ->init() to avoid any confusion in later work bringing multi-sensors support. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-07-27thermal: armada: remove misleading commentsMiquel Raynal1-2/+0
On older versions of this thermal IP, TSEN referred as the internal sensor in the thermal IP while EXT_TSEN referred as sensors outside of this IP, ie in the CPUs most of the time. The bit names in the specifications do not follow this rule anymore, so remove these comments that are misleading. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-07-27thermal: armada: remove useless register accessesMiquel Raynal1-6/+2
Prepare the migration to use regmaps by first simplifying the initialization functions: avoid unnecessary write/read cycles on configuration registers. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-07-27thermal: armada: add a function that sanitizes the thermal zone nameMiquel Raynal1-1/+36
Thermal zone names must follow certain rules imposed by the framework. They are limited in length and shall not have any hyphen '-'. This is done in a separate function for future use in another location. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-01-01thermal: armada: Give meaningful names to the thermal zonesMiquel Raynal1-2/+2
After registration to the thermal core, sysfs will make one entry per instance of the driver in /sys/class/thermal_zoneX and /sys/class/hwmon/hwmonX, X being the index of the instance, all of them having the type/name "armada_thermal". Until now there was only one thermal zone per SoC but SoCs like Armada A7K and Armada A8K have respectively two and three thermal zones (one per AP and one per CP) and this number is subject to grow in the future. Use dev_name() instead of the "armada_thermal" string to get a meaningful name and be able to identify the thermal zones from userspace. Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-01-01thermal: armada: Wait sensors validity before exiting the init callbackMiquel Raynal1-3/+20
The thermal core will check for sensors validity right after the initialization callback has returned. As the initialization routine make a reset, the sensors are not ready immediately and the core spawns an error in the dmesg. Avoid this annoying situation by polling on the validity bit before exiting from these routines. This also avoid the use of blind sleeps. Suggested-by: David Sniatkiwicz <davidsn@marvell.com> Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-01-01thermal: armada: Change sensors trim default valueMiquel Raynal1-0/+13
Errata #132698 highlights an error in the default value of Tc trim. Set this parameter to b'011. Suggested-by: David Sniatkiwicz <davidsn@marvell.com> Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-01-01thermal: armada: Update Kconfig and module descriptionMiquel Raynal1-2/+2
Update Armada thermal driver Kconfig entry as well as the driver's MODULE_DESCRIPTION content, now that 64-bit SoCs are also supported, eg. Armada 7K and Armada 8K. Use the generic term "Marvell EBU Armada SoCs" instead of listing all the supported SoCs everywhere (excepted in the Kconfig description, where it is useful to have a list). Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-01-01thermal: armada: Add support for Armada CP110Baruch Siach1-7/+26
The CP110 component is integrated in the Armada 8k and 7k lines of processors. Signed-off-by: Baruch Siach <baruch@tkos.co.il> [<miquel.raynal@free-electrons.com>: renamed the register pointers as well as some definitions related to the new register names and simplified the init sequence for Armada 380] Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-01-01thermal: armada: Add support for Armada AP806Baruch Siach1-16/+58
The AP806 component is integrated in the Armada 8K and 7K lines of processors. The thermal sensor sample field on the status register is a signed value. Extend armada_get_temp() and the driver structure to handle signed values. Signed-off-by: Baruch Siach <baruch@tkos.co.il> [<miquel.raynal@free-electrons.com>: Changes when applying over the previous patches, including the register names changes, also switched the coefficients values to s64 instead of unsigned long to deal with negative values and used do_div instead of the traditionnal '/'] Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-01-01thermal: armada: Use real status register nameMiquel Raynal1-8/+8
Three 32-bit registers are used to drive the thermal IP: control0, control1 and status. The two control registers share the same name both in the documentation and in the code, while the latter is referred as "sensor" in the code. Rename this pointer to be called "status" in order to be aligned with the documentation. Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-01-01thermal: armada: Clarify control registers accessesMiquel Raynal1-22/+54
Bindings were incomplete for a long time by only exposing one of the two available control registers. To ease the migration to the full bindings (already in use for the Armada 375 SoC), rename the pointers for clarification. This way, it will only be needed to add another pointer to access the other control register when the time comes. This avoids dangerous situations where the offset 0 of the control area can be either one register or the other depending on the bindings used. After this change, device trees of other SoCs could be migrated to the "full" bindings if they may benefit from features from the unaccessible register, without any change in the driver. Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-01-01thermal: armada: Simplify the check of the validity bitMiquel Raynal1-8/+6
All Armada SoCs use one bit to declare if the sensor values are valid. This bit moves across the versions of the IP. The method until then was to do both a shift and compare with an useless flag of "0x1". It is clearer and quicker to directly save the value that must be ANDed instead of the bit position and do a single bitwise AND operation. Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-01-01thermal: armada: Use msleep for long delaysBaruch Siach1-4/+4
Use msleep for long (> 10ms) delays, instead of the busy waiting mdelay. All delays are called from the probe routine, where scheduling is allowed. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-10-31thermal: armada: fix formula documentation commentBaruch Siach1-1/+1
The formula implementation at armada_get_temp() indicates that the sign in the formula is inverted. Cc: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-10-30thermal: armada: Fix possible overflow in the Armada 380 thermal sensor formulaNadav Haklai1-3/+3
Update the coefficients so the calculation will not overrun the unsigned long 32bits boundary Signed-off-by: Nadav Haklai <nadavh@marvell.com> Reviewed-by: Victor Axelrod <victora@marvell.com> Reviewed-by: Neta Zur Hershkovits <neta@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-08-03thermal: consistently use int for temperaturesSascha Hauer1-1/+1
The thermal code uses int, long and unsigned long for temperatures in different places. Using an unsigned type limits the thermal framework to positive temperatures without need. Also several drivers currently will report temperatures near UINT_MAX for temperatures below 0°C. This will probably immediately shut the machine down due to overtemperature if started below 0°C. 'long' is 64bit on several architectures. This is not needed since INT_MAX °mC is above the melting point of all known materials. Consistently use a plain 'int' for temperatures throughout the thermal code and the drivers. This only changes the places in the drivers where the temperature is passed around as pointer, when drivers internally use another type this is not changed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Peter Feuerer <peter@piie.net> Cc: Punit Agrawal <punit.agrawal@arm.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Jean Delvare <jdelvare@suse.de> Cc: Peter Feuerer <peter@piie.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: linux-acpi@vger.kernel.org Cc: platform-driver-x86@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Darren Hart <dvhart@infradead.org> Cc: lm-sensors@lm-sensors.org Signed-off-by: Zhang Rui <rui.zhang@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-21 03:39:09 +0000