summaryrefslogtreecommitdiff
path: root/drivers/target
AgeCommit message (Collapse)AuthorFilesLines
2014-04-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2-2/+2
Pull yet more networking updates from David Miller: 1) Various fixes to the new Redpine Signals wireless driver, from Fariya Fatima. 2) L2TP PPP connect code takes PMTU from the wrong socket, fix from Dmitry Petukhov. 3) UFO and TSO packets differ in whether they include the protocol header in gso_size, account for that in skb_gso_transport_seglen(). From Florian Westphal. 4) If VLAN untagging fails, we double free the SKB in the bridging output path. From Toshiaki Makita. 5) Several call sites of sk->sk_data_ready() were referencing an SKB just added to the socket receive queue in order to calculate the second argument via skb->len. This is dangerous because the moment the skb is added to the receive queue it can be consumed in another context and freed up. It turns out also that none of the sk->sk_data_ready() implementations even care about this second argument. So just kill it off and thus fix all these use-after-free bugs as a side effect. 6) Fix inverted test in tcp_v6_send_response(), from Lorenzo Colitti. 7) pktgen needs to do locking properly for LLTX devices, from Daniel Borkmann. 8) xen-netfront driver initializes TX array entries in RX loop :-) From Vincenzo Maffione. 9) After refactoring, some tunnel drivers allow a tunnel to be configured on top itself. Fix from Nicolas Dichtel. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (46 commits) vti: don't allow to add the same tunnel twice gre: don't allow to add the same tunnel twice drivers: net: xen-netfront: fix array initialization bug pktgen: be friendly to LLTX devices r8152: check RTL8152_UNPLUG net: sun4i-emac: add promiscuous support net/apne: replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO net: ipv6: Fix oif in TCP SYN+ACK route lookup. drivers: net: cpsw: enable interrupts after napi enable and clearing previous interrupts drivers: net: cpsw: discard all packets received when interface is down net: Fix use after free by removing length arg from sk_data_ready callbacks. Drivers: net: hyperv: Address UDP checksum issues Drivers: net: hyperv: Negotiate suitable ndis version for offload support Drivers: net: hyperv: Allocate memory for all possible per-pecket information bridge: Fix double free and memory leak around br_allowed_ingress bonding: Remove debug_fs files when module init fails i40evf: program RSS LUT correctly i40evf: remove open-coded skb_cow_head ixgb: remove open-coded skb_cow_head igbvf: remove open-coded skb_cow_head ...
2014-04-11target/tcm_fc: Rename ft_tport_create to ft_tport_getAndy Grover1-3/+3
Because it doesn't always create, if there's an existing one it just returns it. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-11target/tcm_fc: Rename ft_{add,del}_lport to {add,del}_wwnAndy Grover1-6/+6
These functions are not adding or deleting an lport. They are adding a wwn that may match with an lport that is present on the system. Renaming ft_del_lport also means we won't have functions named both ft_del_lport and ft_lport_del any more. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-11target/tcm_fc: Rename structs and list members for clarityAndy Grover2-33/+32
Rename struct ft_lport_acl to ft_lport_wwn. "acl" is associated with something different in LIO terms. Really, ft_lport_wwn is the fabric-specific wrapper for the struct se_wwn. Rename "lacl" local variables to "ft_wwn" as well. Rename list_heads used as list members to make it clear they're nodes, not heads. Rename lport_node to ft_wwn_node. Rename ft_lport_list to ft_wwn_list Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-11target/tcm_fc: Limit to 1 TPG per wwnAndy Grover2-11/+12
tcm_fc doesn't support multiple TPGs per wwn. For proof, see ft_lport_find_tpg. Enforce this in the code. Replace ft_lport_wwn.tpg_list with a single pointer. We can't fold ft_tpg into ft_lport_wwn because they can have different lifetimes. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-11target/tcm_fc: Don't export ft_lport_listAndy Grover2-2/+1
Nobody outside tfc_conf.c uses it. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-11target/tcm_fc: Fix use-after-free of ft_tpgAndy Grover1-0/+1
ft_del_tpg checks tpg->tport is set before unlinking the tpg from the tport when the tpg is being removed. Set this pointer in ft_tport_create, or the unlinking won't happen in ft_del_tpg and tport->tpg will reference a deleted object. This patch sets tpg->tport in ft_tport_create, because that's what ft_del_tpg checks, and is the only way to get back to the tport to clear tport->tpg. The bug was occuring when: - lport created, tport (our per-lport, per-provider context) is allocated. tport->tpg = NULL - tpg created - a PRLI is received. ft_tport_create is called, tpg is found and tport->tpg is set - tpg removed. ft_tpg is freed in ft_del_tpg. Since tpg->tport was not set, tport->tpg is not cleared and points at freed memory - Future calls to ft_tport_create return tport via first conditional, instead of searching for new tpg by calling ft_lport_find_tpg. tport->tpg is still invalid, and will access freed memory. see https://bugzilla.redhat.com/show_bug.cgi?id=1071340 Cc: stable@vger.kernel.org # 3.0+ Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-11target: Add check to prevent Abort Task from aborting itselfAlex Leung1-0/+5
This patch addresses an issue that occurs when an ABTS is received for an se_cmd that completes just before the sess_cmd_list is searched in core_tmr_abort_task(). When the sess_cmd_list is searched, since the ABTS and the FCP_CMND being aborted (that just completed) both have the same OXID, TFO->get_task_tag(TMR) returns a value that matches tmr->ref_task_tag (from TFO->get_task_tag(FCP_CMND)), and the Abort Task tries to abort itself. When this occurs, transport_wait_for_tasks() hangs forever since the TMR is waiting for itself to finish. This patch adds a check to core_tmr_abort_task() to make sure the TMR does not attempt to abort itself. Signed-off-by: Alex Leung <alex.leung@emulex.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-11net: Fix use after free by removing length arg from sk_data_ready callbacks.David S. Miller2-2/+2
Several spots in the kernel perform a sequence like: skb_queue_tail(&sk->s_receive_queue, skb); sk->sk_data_ready(sk, skb->len); But at the moment we place the SKB onto the socket receive queue it can be consumed and freed up. So this skb->len access is potentially to freed up memory. Furthermore, the skb->len can be modified by the consumer so it is possible that the value isn't accurate. And finally, no actual implementation of this callback actually uses the length argument. And since nobody actually cared about it's value, lots of call sites pass arbitrary values in such as '0' and even '1'. So just remove the length argument from the callback, that way there is no confusion whatsoever and all of these use-after-free cases get fixed as a side effect. Based upon a patch by Eric Dumazet and his suggestion to audit this issue tree-wide. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-07target: Enable READ_STRIP emulation in target_complete_ok_workNicholas Bellinger1-0/+31
This patch enables the use of READ_STRIP software emulation in target_complete_ok_work() code for I/O READs. This is useful when the fabric does not support READ_STRIP hardware offload, but would still like to interact with backend device that have T10 PI enabled. v2 changes: - Move TARGET_PROT_DIN_STRIP check from target_check_read_strip() into target_complete_ok_work() (Sagi) Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Quinn Tran <quinn.tran@qlogic.com> Cc: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-07target/sbc: Add sbc_dif_read_strip software emulationNicholas Bellinger1-4/+27
Split up __sbc_dif_verify_read() so that VERIFY READ emulation can perform target-core specific READ_STRIP, seperate from the existing FILEIO/RAMDISK backend emulation code. Also add sbc_dif_read_strip() in order to determine number of sectors using cmd->prot_length, and skip the extra sbc_dif_copy_prot(). Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Quinn Tran <quinn.tran@qlogic.com> Cc: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-07target: Enable WRITE_INSERT emulation in target_execute_cmdNicholas Bellinger1-0/+9
This patch enables WRITE_INSERT emulation in target_execute_cmd() in order to locally generate DIF PI before submitting the WRITE to the underlying backend device. This is required for fabric drivers that currently don't support DIF over-the-wire, in order to inact with backend devices that have hardware (IBLOCK) or software (FILEIO + RAMDISK) support for handling T10 PI. v2 changes: - Convert to sbc_dif_generate() usage (Sagi) Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Quinn Tran <quinn.tran@qlogic.com> Cc: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-07target/sbc: Add sbc_dif_generate software emulationNicholas Bellinger1-0/+44
This patch adds WRITE_INSERT emulation within target-core using TYPE1 / TYPE3 PI modes in sbc_dif_generate() code. This is useful in order for existing legacy fabrics that do not support protection offloads to interact with backend devices that currently have T10 PI enabled. v2 changes: - Rename to sbc_dif_generate() (Sagi) Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Quinn Tran <quinn.tran@qlogic.com> Cc: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-07target/sbc: Only expose PI read_cap16 bits when supported by fabricNicholas Bellinger1-2/+5
Only expose the PI protection type bits in READ_CAPACITY_16 if the session + fabric support DIX PASS operations. Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Quinn Tran <quinn.tran@qlogic.com> Cc: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-07target/spc: Only expose PI mode page bits when supported by fabricNicholas Bellinger1-11/+17
Only expose the control modepage bit for Application Tag Owner (ATO) if the session + fabric support DIX PASS operations. Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Quinn Tran <quinn.tran@qlogic.com> Cc: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-07target/spc: Only expose PI inquiry bits when supported by fabricNicholas Bellinger1-7/+14
Only expose standard INQUIRY PROTECT=1 and EVPD=0x86 TYPE1/TYPE3 PI control bits if the session + fabric support DIX PASS operations. Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Quinn Tran <quinn.tran@qlogic.com> Cc: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-07target: Pass in transport supported PI at session initializationNicholas Bellinger6-7/+18
In order to support local WRITE_INSERT + READ_STRIP operations for non PI enabled fabrics, the fabric driver needs to be able signal what protection offload operations are supported. This is done at session initialization time so the modes can be signaled by individual se_wwn + se_portal_group endpoints, as well as optionally across different transports on the same endpoint. For iser-target, set TARGET_PROT_ALL if the underlying ib_device has already signaled PI offload support, and allow this to be exposed via a new iscsit_transport->iscsit_get_sup_prot_ops() callback. For loopback, set TARGET_PROT_ALL to signal SCSI initiator mode operation. For all other drivers, set TARGET_PROT_NORMAL to disable fabric level PI. Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Quinn Tran <quinn.tran@qlogic.com> Cc: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-07target/iblock: Fix double bioset_integrity_free bugNicholas Bellinger1-3/+2
This patch fixes a double free bug during IBLOCK backend shutdown where bioset_integrity_free() was incorrectly called ahead of bioset_free(), who is already making the same call directly. This bug was introduced with commit ecebbf6cc, and will end up triggering a general protection fault in iblock_free_device() Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Quinn Tran <quinn.tran@qlogic.com> Cc: Giridhar Malavali <giridhar.malavali@qlogic.com> Cc: <stable@vger.kernel.org> #3.14+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-07Target/sbc: Initialize COMPARE_AND_WRITE write_sg scatterlistMartin Svec1-1/+2
When compiled with CONFIG_DEBUG_SG set, uninitialized SGL leads to BUG() in compare_and_write_callback(). Signed-off-by: Martin Svec <martin.svec@zoner.cz> Cc: <stable@vger.kernel.org> #3.12+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-07target/rd: T10-Dif: RAM disk is allocating more space than required.Quinn Tran1-4/+10
Ram disk is allocating 8x more space than required for diff data. For large RAM disk test, there is small potential for memory starvation. (Use block_size when calculating total_sg_needed - sagi + nab) Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Quinn Tran <quinn.tran@qlogic.com> Cc: <stable@vger.kernel.org> #3.14+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-07iscsi-target: Fix ERL=2 ASYNC_EVENT connection pointer bugNicholas Bellinger1-1/+3
This patch fixes a long-standing bug in iscsit_build_conn_drop_async_message() where during ERL=2 connection recovery, a bogus conn_p pointer could end up being used to send the ISCSI_OP_ASYNC_EVENT + DROPPING_CONNECTION notifying the initiator that cmd->logout_cid has failed. The bug was manifesting itself as an OOPs in iscsit_allocate_cmd() with a bogus conn_p pointer in iscsit_build_conn_drop_async_message(). Reported-by: Arshad Hussain <arshad.hussain@calsoftinc.com> Reported-by: santosh kulkarni <santosh.kulkarni@calsoftinc.com> Cc: <stable@vger.kernel.org> #3.1+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-07target: Add TFO->abort_task for aborted task resources releaseNicholas Bellinger11-2/+53
Now that TASK_ABORTED status is not generated for all cases by TMR ABORT_TASK + LUN_RESET, a new TFO->abort_task() caller is necessary in order to give fabric drivers a chance to unmap hardware / software resources before the se_cmd descriptor is released via the normal TFO->release_cmd() codepath. This patch adds TFO->aborted_task() in core_tmr_abort_task() in place of the original transport_send_task_abort(), and also updates all fabric drivers to implement this caller. The fabric drivers that include changes to perform cleanup via ->aborted_task() are: - iscsi-target - iser-target - srpt - tcm_qla2xxx The fabric drivers that currently set ->aborted_task() to NOPs are: - loopback - tcm_fc - usb-gadget - sbp-target - vhost-scsi For the latter five, there appears to be no additional cleanup required before invoking TFO->release_cmd() to release the se_cmd descriptor. v2 changes: - Move ->aborted_task() call into transport_cmd_finish_abort (Alex) Cc: Alex Leung <amleung21@yahoo.com> Cc: Mark Rustad <mark.d.rustad@intel.com> Cc: Roland Dreier <roland@kernel.org> Cc: Vu Pham <vu@mellanox.com> Cc: Chris Boot <bootc@bootc.net> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Giridhar Malavali <giridhar.malavali@qlogic.com> Cc: Saurav Kashyap <saurav.kashyap@qlogic.com> Cc: Quinn Tran <quinn.tran@qlogic.com> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-07target: Fix Task Aborted Status (TAS) handlingAlex Leung2-15/+17
This patch addresses three of long standing issues wrt to Task Aborted Status (TAS) handling. The first is the incorrect assumption in core_tmr_handle_tas_abort() that TASK_ABORTED status is sent for the task referenced by TMR ABORT_TASK, and sending TASK_ABORTED status for TMR LUN_RESET on the same nexus the LUN_RESET was received. The second is to ensure the lun reference count is dropped within transport_cmd_finish_abort() by calling transport_lun_remove_cmd() before invoking transport_cmd_check_stop_to_fabric(). The last is to fix the delayed TAS handling to allow outstanding WRITEs to complete before sending the TASK_ABORTED status. This includes changing transport_check_aborted_status() to avoid processing when SCF_SEND_DELAYED_TAS has not be set, and updating transport_send_task_abort() to drop the SCF_SENT_DELAYED_TAS check. Signed-off-by: Alex Leung <amleung21@yahoo.com> Cc: Alex Leung <amleung21@yahoo.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-07iscsi-target: Add missing NopOUT->flag (LMB) sanity checkArshad Hussain1-0/+10
This patch adds check for NopOUT->flag (LMB) which is a mandatory as per RFC 3720 Section 10.18. (Fix up context changes for v3.14-rc code - nab) Signed-off-by: Arshad Hussain <arshad.hussain@calsoftinc.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-07Target/sbc: add debug printSagi Grimberg1-0/+3
Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-07Target/configfs: Expose iSCSI network portal group T10-PI supportSagi Grimberg3-0/+26
User may enable T10-PI support per network portal group. any connection established on top of it, will be required to serve protected transactions. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-07Target/iscsi: Add T10-PI indication for iscsi_portal_groupSagi Grimberg2-1/+6
In case an iscsi portal group will be defined as t10_pi enabled, all connections on top of it will support protected transactions. T10-PI support may require extra reource allocation and maintenance by the transport layer, so we don't want to apply them on non-t10_pi network portals. This is a hook for the iscsi target layer to signal the transport at connection establishment that this connection will carry protected transactions. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-07Target/core: Remove prot_handover use for nowSagi Grimberg1-1/+0
This is not going to be supported soon - so drop it. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-07Target/dif: Introduce protection-passthough-only modeSagi Grimberg3-6/+12
Some transports (iSCSI/iSER/SRP/FC) support hardware INSERT/STRIP capabilities while other transports like loopback/vhost-scsi need perform this is software. This patch allows fabrics using SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC to signal the early LUN scan handling case where PROTECT CDB bits are set, but no fabric buffer has been provided. For transports which use generic new command these buffers have yet to be allocated. Also this way, target may support protection information against legacy initiators (writes are inserted and reads are stripped). (Only set prot_pto for loopback during early special case - nab) Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-04-07Target/file: place escape values for protection information formatSagi Grimberg1-39/+1
No need to actually compute protection information when formatting Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-03-13Target/sbc: Set protection operation and relevant checksSagi Grimberg2-15/+74
SBC-3 mandates the protection checks that must be performed in the rdprotect/wrprotect field. Use them. According to backstore device pi_attributes and cdb rdprotect/wrprotect field. (Fix incorrect se_cmd->prot_type -> TARGET_PROT_NORMAL comparision in transport_generic_new_cmd - nab) (Fix missing break in sbc_set_prot_op_checks - DanC + Sagi) Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-03-13Target/transport: Allocate protection sg if neededSagi Grimberg1-0/+12
In case protection information is involved, allocate protection SG-list for transport. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-03-13target: silence GCC warning in target_alua_state_checkPaul Bolle1-51/+44
Building target_core_alua.o triggers a GCC warning: drivers/target/target_core_alua.c: In function ‘target_alua_state_check’: drivers/target/target_core_alua.c:773:18: warning: ‘alua_ascq’ may be used uninitialized in this function [-Wmaybe-uninitialized] cmd->scsi_ascq = alua_ascq; ^ This is a false positive. A little trial and error shows it is apparently caused by core_alua_state_lba_dependent(). It must be hard for GCC to track the branches of a switch statement, inside a list_for_each_entry loop, inside a while loop. But if we add a small (inline) helper function we can reorganize the code a bit. That also allows to drop alua_ascq which, obviously, gets rid of this warning. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-03-06Target/sbc: Fix sbc_copy_prot for offset scattersSagi Grimberg1-16/+22
When copying between device and command protection scatters we must take into account that device scatters might be offset and we might copy outside scatter range. Thus for each cmd prot scatter we must take the min between cmd prot scatter, dev prot scatter, and whats left (and loop in case we havn't copied enough from/to cmd prot scatter). Example (single t_prot_sg of len 2048): kernel: sbc_dif_copy_prot: se_cmd=ffff880380aaf970, left=2048, len=2048, dev_prot_sg_offset=3072, dev_prot_sg_len=4096 kernel: isert: se_cmd=ffff880380aaf970 PI error found type 0 at sector 0x2600 expected 0x0 vs actual 0x725f, lba=2580 Instead of copying 2048 from offset 3072 (copying junk outside sg limit 4096), we must to copy 1024 and continue to next sg until we complete cmd prot scatter. This issue was found using iSER T10-PI offload over rd_mcp (wasn't discovered with fileio since file_dev prot sglists are never offset). Changes from v1: - Fix sbc_copy_prot copy length miss-calculation Changes from v0: - Removed psg->offset consideration for psg_len computation - Removed sg->offset consideration for offset condition - Added copied consideraiton for len computation - Added copied offset to paddr when doing memcpy Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-03-04iscsi/iser-target: Fix isert_conn->state hung shutdown issuesNicholas Bellinger1-0/+4
This patch addresses a couple of different hug shutdown issues related to wait_event() + isert_conn->state. First, it changes isert_conn->conn_wait + isert_conn->conn_wait_comp_err from waitqueues to completions, and sets ISER_CONN_TERMINATING from within isert_disconnect_work(). Second, it splits isert_free_conn() into isert_wait_conn() that is called earlier in iscsit_close_connection() to ensure that all outstanding commands have completed before continuing. Finally, it breaks isert_cq_comp_err() into seperate TX / RX related code, and adds logic in isert_cq_rx_comp_err() to wait for outstanding commands to complete before setting ISER_CONN_DOWN and calling complete(&isert_conn->conn_wait_comp_err). Acked-by: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: <stable@vger.kernel.org> #3.10+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-03-04iscsi/iser-target: Use list_del_init for ->i_conn_nodeNicholas Bellinger2-11/+11
There are a handful of uses of list_empty() for cmd->i_conn_node within iser-target code that expect to return false once a cmd has been removed from the per connect list. This patch changes all uses of list_del -> list_del_init in order to ensure that list_empty() returns false as expected. Acked-by: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: <stable@vger.kernel.org> #3.10+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-03-04iscsi-target: Fix iscsit_get_tpg_from_np tpg_state bugNicholas Bellinger1-1/+1
This patch fixes a bug in iscsit_get_tpg_from_np() where the tpg->tpg_state sanity check was looking for TPG_STATE_FREE, instead of != TPG_STATE_ACTIVE. The latter is expected during a normal TPG shutdown once the tpg_state goes into TPG_STATE_INACTIVE in order to reject any new incoming login attempts. Cc: <stable@vger.kernel.org> #3.10+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-02-23Target/sbc: Don't use sg as iterator in sbc_verify_readSagi Grimberg1-5/+5
Because then this sg is passed to sbc_copy_prot which will hit a protection fault in cases we have more than a single sg. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-02-23target: Add DIF sense codes in transport_generic_request_failureNicholas Bellinger1-0/+3
This patch adds the three missing DIF related sense codes within transport_generic_request_failure(), which are required to ensure that the correct ASC/ASQC is generated by the subsequent call to transport_send_check_condition_and_sense(). Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-02-23target/sbc: Fix sbc_dif_copy_prot addr offset bugNicholas Bellinger1-3/+2
This patch fixes a bug in sbc_dif_copy_prot() where the updated addr offset did not take into account the case where the associated scatterlist had not been incremented. This addresses the case where incoming protection scatterlists may contain a length smaller than PAGE_SIZE across multiple entires, when the target protection scatterlists are always being explicitly filled up to PAGE_SIZE before adding another entry. Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-02-12Target/sbc: Fix protection copy routineSagi Grimberg1-0/+8
Need to take into account that protection sg_list (copy-buffer) may consist of multiple entries. Changes from v0: - Changed commit description Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-02-12target: Simplify command completion by removing CMD_T_FAILED flagRoland Dreier1-4/+1
The CMD_T_FAILED flag is set used in one place to record the result of a trivial test, and it is only tested once, few lines later. We might as well make the code simpler and easier to read by directly doing the test of "success" where we want to use it. Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-02-12iscsi-target: Fix SNACK Type 1 + BegRun=0 handlingNicholas Bellinger1-1/+3
This patch fixes Status SNACK handling of BegRun=0 to allow for all unacknowledged respones to be resent, instead of always assuming that BegRun would be an explicit value less than the current ExpStatSN. Reported-by: santosh kulkarni <santosh.kulkarni@calsoftinc.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-02-12target: Fix missing length check in spc_emulate_evpd_83()Roland Dreier1-2/+2
Commit fbfe858fea2a ("target_core_spc: Include target device descriptor in VPD page 83") added a new length variable, but (due to a cut and paste mistake?) just checks scsi_name_len against 256 twice. Fix this to check scsi_target_len for overflow too. Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-02-12target: Fix 32-bit + CONFIG_LBDAF=n link error w/ sector_divNicholas Bellinger1-1/+1
This patch changes core_alua_state_lba_dependent() to use do_div() instead sector_div() to avoid the following link error on 32-bit with CONFIG_LBDAF=n as reported by Jim: buildlog-1391099072.txt-drivers/built-in.o: In function `target_alua_state_check': buildlog-1391099072.txt-(.text+0x928d93): undefined reference to `__umoddi3' buildlog-1391099072.txt:make: *** [vmlinux] Error 1 -- buildlog-1391101753.txt- CC init/version.o buildlog-1391101753.txt- LD init/built-in.o buildlog-1391101753.txt-drivers/built-in.o: In function `core_alua_state_lba_dependent': buildlog-1391101753.txt-/home/jim/linux/drivers/target/target_core_alua.c:503: undefined reference to `__umoddi3' buildlog-1391101753.txt:make: *** [vmlinux] Error 1 Reported-by: Jim Davis <jim.epost@gmail.com> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-02-12target: Fix free-after-use regression in PR unregisterNicholas Bellinger1-4/+7
This patch addresses a >= v3.11 free-after-use regression in core_scsi3_emulate_pro_register() that was introduced in the following commit: commit bc118fe4c4a8cfa453491ba77c0a146a6d0e73e0 Author: Andy Grover <agrover@redhat.com> Date: Thu May 16 10:41:04 2013 -0700 target: Further refactoring of core_scsi3_emulate_pro_register() To avoid the free-after-use, save an type value before hand, and only call core_scsi3_put_pr_reg() with a valid *pr_reg. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Andy Grover <agrover@redhat.com> Cc: <stable@vger.kernel.org> #3.11+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-31Merge branch 'for-next' of ↵Linus Torvalds26-222/+1849
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "The highlights this round include: - add support for SCSI Referrals (Hannes) - add support for T10 DIF into target core (nab + mkp) - add support for T10 DIF emulation in FILEIO + RAMDISK backends (Sagi + nab) - add support for T10 DIF -> bio_integrity passthrough in IBLOCK backend (nab) - prep changes to iser-target for >= v3.15 T10 DIF support (Sagi) - add support for qla2xxx N_Port ID Virtualization - NPIV (Saurav + Quinn) - allow percpu_ida_alloc() to receive task state bitmask (Kent) - fix >= v3.12 iscsi-target session reset hung task regression (nab) - fix >= v3.13 percpu_ref se_lun->lun_ref_active race (nab) - fix a long-standing network portal creation race (Andy)" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (51 commits) target: Fix percpu_ref_put race in transport_lun_remove_cmd target/iscsi: Fix network portal creation race target: Report bad sector in sense data for DIF errors iscsi-target: Convert gfp_t parameter to task state bitmask iscsi-target: Fix connection reset hang with percpu_ida_alloc percpu_ida: Make percpu_ida_alloc + callers accept task state bitmask iscsi-target: Pre-allocate more tags to avoid ack starvation qla2xxx: Configure NPIV fc_vport via tcm_qla2xxx_npiv_make_lport qla2xxx: Enhancements to enable NPIV support for QLOGIC ISPs with TCM/LIO. qla2xxx: Fix scsi_host leak on qlt_lport_register callback failure IB/isert: pass scatterlist instead of cmd to fast_reg_mr routine IB/isert: Move fastreg descriptor creation to a function IB/isert: Avoid frwr notation, user fastreg IB/isert: seperate connection protection domains and dma MRs tcm_loop: Enable DIF/DIX modes in SCSI host LLD target/rd: Add DIF protection into rd_execute_rw target/rd: Add support for protection SGL setup + release target/rd: Refactor rd_build_device_space + rd_release_device_space target/file: Add DIF protection support to fd_execute_rw target/file: Add DIF protection init/format support ...
2014-01-30target: Fix percpu_ref_put race in transport_lun_remove_cmdNicholas Bellinger1-2/+3
This patch fixes a percpu_ref_put race for se_lun->lun_ref in transport_lun_remove_cmd() where ->lun_ref could end up being put more than once per command via different target completion and fabric release contexts. It adds a cmpxchg() for se_cmd->lun_ref_active to ensure that percpu_ref_put() is only ever called once per se_cmd. This bug was manifesting itself as a LUN shutdown regression bug in >= v3.13 code, where percpu_ref_kill() would end up hanging indefinately due to the incorrect percpu_ref count. (Change se_cmd->lun_ref_active from bool -> int to force at least a 4-byte cmpxchg with MIPS ll/sc ins. - Fengguang) Reported-by: Tommy Apel <tommyapeldk@gmail.com> Cc: Tommy Apel <tommyapeldk@gmail.com> Cc: <stable@vger.kernel.org> #3.13+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-30target/iscsi: Fix network portal creation raceAndy Grover1-13/+21
When creating network portals rapidly, such as when restoring a configuration, LIO's code to reuse existing portals can return a false negative if the thread hasn't run yet and set np_thread_state to ISCSI_NP_THREAD_ACTIVE. This causes an error in the network stack when attempting to bind to the same address/port. This patch sets NP_THREAD_ACTIVE before the np is placed on g_np_list, so even if the thread hasn't run yet, iscsit_get_np will return the existing np. Also, convert np_lock -> np_mutex + hold across adding new net portal to g_np_list to prevent a race where two threads may attempt to create the same network portal, resulting in one of them failing. (nab: Add missing mutex_unlocks in iscsit_add_np failure paths) (DanC: Fix incorrect spin_unlock -> spin_unlock_bh) Signed-off-by: Andy Grover <agrover@redhat.com> Cc: <stable@vger.kernel.org> #3.1+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-01-25target: Report bad sector in sense data for DIF errorsSagi Grimberg2-0/+18
SPC-4 states that data-integrity errors shall also report the failed sector in CHECK_CONDITION response sense data information field. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>