summaryrefslogtreecommitdiff
path: root/drivers/spi
AgeCommit message (Collapse)AuthorFilesLines
2013-04-29Merge tag 'spi-v3.10' of ↵Linus Torvalds27-821/+3372
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "A fairly quiet release for SPI, mainly driver work. A few highlights: - Supports bits per word compatibility checking in the core. - Allow use of the IP used in Freescale SPI controllers outside Freescale SoCs. - DMA support for the Atmel SPI driver. - New drivers for the BCM2835 and Tegra114" * tag 'spi-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (68 commits) spi-topcliff-pch: fix to use list_for_each_entry_safe() when delete list items spi-topcliff-pch: missing platform_driver_unregister() on error in pch_spi_init() ARM: dts: add pinctrl property for spi node for atmel SoC ARM: dts: add spi nodes for the atmel boards ARM: dts: add spi nodes for atmel SoC ARM: at91: add clocks for spi dt entries spi/spi-atmel: add dmaengine support spi/spi-atmel: add flag to controller data for lock operations spi/spi-atmel: add physical base address spi/sirf: fix MODULE_DEVICE_TABLE MAINTAINERS: Add git repository and update my address spi/s3c64xx: Check for errors in dmaengine prepare_transfer() spi/s3c64xx: Fix non-dmaengine usage spi: omap2-mcspi: fix error return code in omap2_mcspi_probe() spi/s3c64xx: let device core setup the default pin configuration MAINTAINERS: Update Grant's email address and maintainership spi: omap2-mcspi: Fix transfers if DMADEVICES is not set spi: s3c64xx: move to generic dmaengine API spi-gpio: init CS before spi_bitbang_setup() spi: spi-mpc512x-psc: let transmiter/receiver enabled when in xfer loop ...
2013-04-28spi-topcliff-pch: fix to use list_for_each_entry_safe() when delete list itemsWei Yongjun1-6/+6
Since we will remove items off the list using list_del_init() we need to use a safe version of the list_for_each_entry() macro aptly named list_for_each_entry_safe(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Mark Brown <broonie@sirena.org.uk>
2013-04-25spi-topcliff-pch: missing platform_driver_unregister() on error in ↵Wei Yongjun1-1/+3
pch_spi_init() Add the missing platform_driver_unregister() before return from pch_spi_init() in the error handling case. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-24spi/spi-atmel: add dmaengine supportNicolas Ferre1-21/+566
Add dmaengine support. Using "has_dma_support" member of struct is used to select the transfer mode: dmaengine or pdc. For the dmaengine transfer mode, it supports both 8 bits and 16 bits transfer. For the dmaengine transfer mode, if it fails to config dmaengine, or if the message length is less than 16 bytes, it will use the PIO transfer mode. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> [wenyou.yang@atmel.com: using "has_dma_support" to select dmaengine as the spi xfer mode] [wenyou.yang@atmel.com: fix DMA: OOPS if buffer > 4096 bytes] [wenyou.yang@atmel.com: submit the patch] Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Richard Genoud <richard.genoud@gmail.com> [richard.genoud@gmail.com: update with dmaengine interface] [richard.genoud@gmail.com: fix __init/__devinit sections mismatch] [richard.genoud@gmail.com: adapt to slave_config changes] [richard.genoud@gmail.com: add support t0 16 bits transfer] Tested-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-23spi/spi-atmel: add flag to controller data for lock operationsNicolas Ferre1-14/+21
Will allow to drop the lock during DMA operations. Replacing non-irqsave versions with irqsave versions of the lock to make it correct in both pdc and dmaengine transfer mode Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> [wenyou.yang@atmel.com: submit the patch] Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Tested-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-23spi/spi-atmel: add physical base addressNicolas Ferre1-0/+2
Needed for future use with dmaengine enabled driver. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> [wenyou.yang@atmel.com: submit the patch] Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Tested-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-23spi/sirf: fix MODULE_DEVICE_TABLEArnd Bergmann1-1/+1
This fixes building the spi-sirf driver as a loadable module, which uses an incorrect MODULE_DEVICE_TABLE, by changing the reference to the correct symbol. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-18spi/s3c64xx: Check for errors in dmaengine prepare_transfer()Mark Brown1-1/+25
Don't silently ignore errors, report them. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-18spi/s3c64xx: Fix non-dmaengine usageMark Brown1-3/+3
The multiplatform conversion in commit 788437 (spi: s3c64xx: move to generic dmaengine API) tested for the use of the Samsung-specific DMA API with SAMSUNG_DMADEV when in fact S3C_DMA should be used. This renderd DMA based transfers non-functional on platforms not using dmaengine. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-18spi: omap2-mcspi: fix error return code in omap2_mcspi_probe()Wei Yongjun1-1/+2
Fix to return a negative error code from the error handling case instead of 0, as returned elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-16spi/s3c64xx: let device core setup the default pin configurationThomas Abraham1-62/+4
With device core now able to setup the default pin configuration, the pin configuration code based on the deprecated Samsung specific gpio bindings is removed. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Doug Anderson <dianders@chromium.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Grant Likely <grant.likely@linaro.org>
2013-04-15spi: omap2-mcspi: Fix transfers if DMADEVICES is not setTony Lindgren1-10/+22
Selecting CONFIG_DMADEVICES is optional, and we must be able to continue even without DMA. Otherwise things like omap4430sdp nfsroot will fail if DMA is not selected. Note that the driver already supports PIO mode, but we fail to fall back to PIO if requesting DMA channels fails. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-12spi: s3c64xx: move to generic dmaengine APIArnd Bergmann1-44/+141
The spi-s3c64xx uses a Samsung proprietary interface for talking to the DMA engine, which does not work with multiplatform kernels. This version of the patch leaves the old code in place, behind an #ifdef. This can be removed in the future, after the s3c64xx platform start supporting the regular dmaengine interface. An earlier version of this patch was tested successfully on exynos5250 by Padma Venkat. The conversion was rather mechanical, since the samsung interface is just a shallow wrapper around the dmaengine interface. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-10spi-gpio: init CS before spi_bitbang_setup()Josef Ahmad1-1/+1
spi_bitbang_setup() deasserts the chip select line to initialise the device. The chip select GPIO line is obtained from spi_gpio->cs_gpios[] private data. Currently, devices that are not registered under devicetree environment will call into spi_bitbang_setup() with stale cs_gpios[]. This patch ensures spi_gpio->cs_gpios[] is always initialised prior to calling spi_bitbang_setup(). Reviewed-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Josef Ahmad <josef.ahmad@intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-09spi: spi-mpc512x-psc: let transmiter/receiver enabled when in xfer loopAnatolij Gustschin1-7/+3
There is no need to disable transmitter/receiver after each loop iteration and re-enable it for next loop iteration. Enable the transmitter/receiver before xfer loop starts and disable it when the whole transfer is done. Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-09spi: spi-mpc512x-psc: add support for gpio chip selectsAnatolij Gustschin1-6/+25
Currently the driver only uses one internal chip select. Add support for gpio chip selects configured by cs-gpios DT binding. Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-08spi/bcm63xx: remove unused speed_hz variableJonas Gorski1-2/+0
speed_hz is a write only member, so we can safely remove it and its generation. Also fixes the missing clk_put after getting the periph clock. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-08spi: tegra: slink: make local symbols staticWei Yongjun1-2/+2
Neither tegra20_spi_cdata nor tegra30_spi_cdata are used outside this file so they can, and should, be static. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-08spi/pxa2xx: Convert to devm_ioremap_resource()Sachin Kamat1-5/+4
Use the newly introduced devm_ioremap_resource() instead of devm_request_and_ioremap() which provides more consistent error handling. devm_ioremap_resource() provides its own error messages; so all explicit error messages can be removed from the failure code paths. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-07spi/tegra114: add spi driverLaxman Dewangan3-0/+1255
Add SPI driver for NVIDIA's Tegra114 SPI controller. This controller is different than the older SoCs SPI controller in internal design as well as register interface. This driver supports the: - non DMA based transfer for smaller transfer i.e. less than FIFO depth. - APB DMA based transfer for larger transfer i.e. more than FIFO depth. - Clock gating through runtime PM callbacks. - registration through DT only. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-04-07spi/tegra-slink: assume CONFIG_OF, remove platform dataStephen Warren1-34/+11
Tegra only supports, and always enables, device tree. Remove all ifdefs and runtime checks for DT support from the driver. Platform data is therefore no longer required. Rework the driver to parse the device tree directly into struct tegra_slink_data. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-04-07spi/tegra-sflash: assume CONFIG_OF, remove platform dataStephen Warren1-32/+9
Tegra only supports, and always enables, device tree. Remove all ifdefs and runtime checks for DT support from the driver. Platform data is therefore no longer required. Rework the driver to parse the device tree directly into struct tegra_sflash_data. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-04-07spi/tegra-slink: remove redundant codeStephen Warren1-31/+1
There is no code to set spi->controller_data, and hence the HW CS logic can never trigger. Remove the unused code. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-04-07spi/spi-fsl-spi: Add support for gpio chipselects for GRLIB type coresAndreas Larsson2-5/+46
This relies upon of_spi_register_master to find out which gpios to use. Acked-by: Anton Vorontsov <anton@enomsg.org> Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-04-07spi/spi-fsl-spi: Add support for Aeroflex Gaisler GRLIB cores normally ↵Andreas Larsson3-14/+101
running on SPARC This adds support for the mostly register-compatible SPICTRL cores from the GRLIB VHDL IP core library from Aeroflex Gaisler. They are normally running on SPARC. A different entry in of_fsl_spi_match matches this core and indicates a different hardware type that is used to set up different function pointers and special cases. The GRLIB core operates in cpu mode. The number of bits per word might be limited. There might be native chipselects selected via a slave select register. These differences to the FSL type cores, if present, are indicated by a capabilities register. Other register and function differences exists but are not relevant to the driver. Acked-by: Anton Vorontsov <anton@enomsg.org> Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-04-07spi/spi-fsl-spi: Add support for setting a maximum number of bits per wordAndreas Larsson2-1/+8
Acked-by: Anton Vorontsov <anton@enomsg.org> Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-04-07spi/spi-fsl-spi: Introduce a type for the driverAndreas Larsson2-7/+34
For being able to distinguishing between the regular type of cores and others with different entries in of_fsl_spi_match. Acked-by: Anton Vorontsov <anton@enomsg.org> Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-04-07spi/spi-fsl-spi: Move setting non-zero tx and rx shifts to a function ↵Andreas Larsson2-20/+36
accessed by a function pointer Acked-by: Anton Vorontsov <anton@enomsg.org> Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-04-07spi/spi-fsl-spi: Make sure in spi_fsl_setup that chipselect becomes inactiveAndreas Larsson1-0/+4
This is needed for a device in SPI_CS_HIGH mode that otherwise could start out active for the first transaction. Acked-by: Anton Vorontsov <anton@enomsg.org> Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-04-07spi/spi-fsl-spi: Make driver usable in CPU mode outside of an FSL_SOC ↵Andreas Larsson8-405/+519
environment This makes the spi-fsl-spi driver usable in CPU mode outside of an FSL_SOC and even an powerpc environment by moving CPM mode functionality to a separate file that is only compiled and linked in an FSL_SOC environment and adding some ifdefs to hide types and functions or provide alternatives. For devicetree probing a "clock-frequency" property is used for clock frequency instead of calls to FSL_SOC-specific functions. Acked-by: Anton Vorontsov <anton@enomsg.org> Signed-off-by: Andreas Larsson <andreas@gaisler.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-04-05Merge tag 'spi-fix-v3.9-rc5' of ↵Linus Torvalds5-44/+42
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc Pull spi fixes from Mark Brown: "A bunch of small driver fixes plus a fix for error handling in the core - nothing too exciting overall." * tag 'spi-fix-v3.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc: spi/mpc512x-psc: optionally keep PSC SS asserted across xfer segmensts spi: Unlock a spinlock before calling into the controller driver. spi/s3c64xx: modified error interrupt handling and init spi/bcm63xx: don't disable non enabled clocks in probe error path spi/bcm63xx: Remove unused variable spi: slink-tegra20: move runtime pm calls to transfer_one_message
2013-04-04Merge tag 'pm+acpi-3.9-rc6' of ↵Linus Torvalds2-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management fixes from Rafael Wysocki: - Revert of a recent cpuidle change that caused Nehalem machines to hang on boot from Alex Shi. - USB power management fix addressing a crash in the port device object's release routine from Rafael J Wysocki. - Device PM QoS fix for a potential deadlock related to sysfs interface from Rafael J Wysocki. - Fix for a cpufreq crash when the /cpus Device Tree node is missing from Paolo Pisati. - Fix for a build issue on ia64 related to the Boot Graphics Resource Table (BGRT) from Tony Luck. - Two fixes for ACPI handles being set incorrectly for device objects that don't correspond to any ACPI namespace nodes in the I2C and SPI subsystems from Rafael J Wysocki. - Fix for compiler warnings related to CONFIG_PM_DEVFREQ being unset from Rajagopal Venkat. - Fix for a symbol definition typo in cpufreq_governor.h from Borislav Petkov. * tag 'pm+acpi-3.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / BGRT: Don't let users configure BGRT on non X86 systems cpuidle / ACPI: recover percpu ACPI processor cstate ACPI / I2C: Use parent's ACPI_HANDLE() in acpi_i2c_register_devices() cpufreq: Correct header guards typo ACPI / SPI: Use parent's ACPI_HANDLE() in acpi_register_spi_devices() cpufreq: check OF node /cpus presence before dereferencing it PM / devfreq: Fix compiler warnings for CONFIG_PM_DEVFREQ unset PM / QoS: Avoid possible deadlock related to sysfs access USB / PM: Don't try to hide PM QoS flags from usb_port_device_release()
2013-04-03mxs/spi: fix error return code in mxs_spi_probe()Wei Yongjun1-0/+1
Fix to return a negative error code from the error handling case instead of 0, as returned elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-03spi: tegra: slink: do prepare dma transfer with DMA_CTRL_ACK flagMark Brown1-2/+2
This reverts commit faa98f7ea6c720beec8a800c9ac6975f760467e2 which was applied in error due to discussion ending up in the wrong thread.
2013-04-02ACPI / SPI: Use parent's ACPI_HANDLE() in acpi_register_spi_devices()Rafael J. Wysocki2-2/+1
The ACPI handle of struct spi_master's dev member should not be set, because this causes that struct spi_master to be associated with the ACPI device node corresponding to its parent as the second "physical_device", which is incorrect (this happens during the registration of struct spi_master). Consequently, acpi_register_spi_devices() should use the ACPI handle of the parent of the struct spi_master it is called for rather than that struct spi_master's ACPI handle (which should be NULL). Make that happen and modify the spi-pxa2xx driver, which currently is the only driver for ACPI-enumerated SPI controller chips, not to set the ACPI handle for the struct spi_master it creates. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-01spi/s3c64xx: add CONFIG_PM_SLEEP to suspend/resume functionsJingoo Han1-2/+2
Add CONFIG_PM_SLEEP to suspend/resume functions to fix the following build warning when CONFIG_PM_SLEEP is not selected. This is because sleep PM callbacks defined by SET_SYSTEM_SLEEP_PM_OPS are only used when the CONFIG_PM_SLEEP is enabled. drivers/spi/spi-s3c64xx.c:1362:12: warning: 's3c64xx_spi_suspend' defined but not used [-Wunused-function] drivers/spi/spi-s3c64xx.c:1381:12: warning: 's3c64xx_spi_resume' defined but not used [-Wunused-function] Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-01Merge branch 'spi-fix' into spi-nextMark Brown3-25/+33
2013-04-01spi/spi-atmel: status information passed through controller dataNicolas Ferre1-5/+8
The status of transfer is stored in controller data structure so that it can be used not only by atmel_spi_msg_done() function. This will be useful for upcoming dmaengine enabled driver. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-01spi/spi-atmel: call unmapping on transfers buffersNicolas Ferre1-3/+5
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-01spi/spi-atmel: add support transfer on CS1,2,3, not only on CS0Wenyou Yang1-13/+12
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-01spi/spi-atmel: detect the capabilities of SPI core by reading the VERSION ↵Wenyou Yang1-16/+50
register. The "has_dma_support" needed for future use with dmaengine driver. [Fixed some unneded ternery operators -- broonie] Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-01spi: tegra: slink: do not prepare dma transfer with DMA_CTRL_ACK flagLaxman Dewangan1-2/+2
Spi starts transfer using dma with DMA_CTRL_ACK which is not require becasue spi driver does not use completed dma_desc after transfer done and so it does not ack the dma descriptor. Removing the DMA_CTRL_ACK flag to avoid memory leak in dma driver. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-01spi/spidev: Use PTR_RET functionAlexandru Gheorghiu1-1/+1
Replaced calls to IS_ERR and PTR_ERR with PTR_RET function. Patch found using coccinelle. Signed-off-by: Alexandru Gheorghiu <gheorghiuandru@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-01spi/fsl: Use PTR_RET functionAlexandru Gheorghiu1-3/+1
Replaced calls to IS_ERR and PTR_ERR with PTR_RET function. Patch found using coccinelle. Signed-off-by: Alexandru Gheorghiu <gheorghiuandru@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-01spi/mpc512x-psc: optionally keep PSC SS asserted across xfer segmenstsAnatolij Gustschin1-1/+1
Some SPI slave devices require asserted chip select signal across multiple transfer segments of an SPI message. Currently the driver always de-asserts the internal SS signal for every single transfer segment of the message and ignores the 'cs_change' flag of the transfer description. Disable the internal chip select (SS) only if this is needed and indicated by the 'cs_change' flag. Without this change, each partial transfer of a surrounding multi-part SPI transaction might erroneously change the SS signal, which might prevent slaves from answering the request that was sent in a previous transfer segment because the transaction could be considered aborted (SS was de-asserted before reading the response). Reported-by: Gerhard Sittig <gerhard.sittig@ifm.com> Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org
2013-04-01spi: remove unused variable in tegra_slink_read_rx_fifo_to_client_rxbuf()Wei Yongjun1-3/+0
The variable bits_per_word is initialized but never used otherwise, so remove the unused variable. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-By: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-01spi: spi-sh-msiof: Use of_match_ptr() macroSachin Kamat1-3/+1
This eliminates having an #ifdef returning NULL for the case when OF is disabled. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-01spi: spi-oc-tiny: Use of_match_ptr() macroSachin Kamat1-3/+1
This eliminates having an #ifdef returning NULL for the case when OF is disabled. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-01spi: Unlock a spinlock before calling into the controller driver.Bryan Freed1-8/+7
spi_pump_messages() calls into a controller driver with unprepare_transfer_hardware() which is documented as "This may sleep". As in the prepare_transfer_hardware() call below, we should release the queue_lock spinlock before making the call. Rework the logic a bit to hold queue_lock to protect the 'busy' flag, then release it to call unprepare_transfer_hardware(). Signed-off-by: Bryan Freed <bfreed@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Doug Anderson <dianders@chromium.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-01spi/omap-mcspi: check condition also after timeoutSebastian Andrzej Siewior1-2/+6
It is possible that the handler gets interrupted after checking the status. After it resumes the time out is due but the condition it was waiting for might be true as well. Therefore it is necessary to check the condition in case of an time out to be sure that the condition is not true after the time passed by. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>