summaryrefslogtreecommitdiff
path: root/drivers/spi/spi-dw-mmio.c
AgeCommit message (Collapse)AuthorFilesLines
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 422Thomas Gleixner1-4/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 101 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531190113.822954939@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-20spi: dw: Add support for an optional interface clockPhil Edworthy1-0/+12
The Synopsys SSI Controller has an interface clock, but most SoCs hide this away. However, on some SoCs you need to explicitly enable the interface clock in order to access the registers. Therefore, add support for an optional interface clock. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Gareth Williams <gareth.williams.jx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-09spi: dw: Convert to use CS GPIO descriptorsLinus Walleij1-22/+0
This converts the DesignWare (dw) SPI master driver to use GPIO descriptors for chip select handling. This driver has a duplicate DT parser in addition to the one in the core, sets up the line as non-asserted and relies on the core to drive the GPIOs. It is a pretty straight-forward conversion. Cc: Talel Shenhar <talel@amazon.com> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Linuxarm <linuxarm@huawei.com> Tested-by: Jay Fang <f.fangjian@huawei.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-12-04spi: dw-mmio: add ACPI supportJay Fang1-0/+8
The Hisilicon Hip08 platform, that uses ACPI, has this controller. Let's add ACPI support for DW SPI MMIO-based host. The ACPI ID used is "HISI0173" for the Designware SPI controller of Hisilicon Hip08 platform. Signed-off-by: Jay Fang <f.fangjian@huawei.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-10-11dw: spi: add support for Amazon's Alpine spi controllerTalel Shenhar1-0/+9
Add support for a new devicetree compatible string called 'amazon,alpine-apb-ssi', which is necessary for the Amazon Alpine spi controller. 'amazon,alpine-dw-apb-ssi' is used in the dw spi driver if specified in the devicetree. Otherwise, fall back to driver default behavior, i.e. original dw IP hw driver behavior. Signed-off-by: Talel Shenhar <talel@amazon.com> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-31spi: dw-mmio: avoid hardcoded field maskAlexandre Belloni1-1/+2
Define a mask for the IF_SI_OWNER field. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-08-29spi: dw-mmio: add MSCC Jaguar2 supportAlexandre Belloni1-6/+22
Unfortunately, the Jaguar2 CPU_SYSTEM_CTRL register set has a different layout than the Ocelot one. Handle that while keeping most of the code common. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-30spi: dw-mmio: add MSCC Ocelot supportAlexandre Belloni1-0/+90
Because the SPI controller deasserts the chip select when the TX fifo is empty (which may happen in the middle of a transfer), the CS should be handled by linux. Unfortunately, some or all of the first four chip selects are not muxable as GPIOs, depending on the SoC. There is a way to bitbang those pins by using the SPI boot controller so use it to set the chip selects. At init time, it is also necessary to give control of the SPI interface to the Designware IP. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-18spi: dw: Disable clock after unregistering the hostMarek Vasut1-1/+1
The dw_mmio driver disables the block clock before unregistering the host. The code unregistering the host may access the SPI block registers. If register access happens with block clock disabled, this may lead to a bus hang. Disable the clock after unregistering the host to prevent such situation. This bug was observed on Altera Cyclone V SoC. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Mark Brown <broonie@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-05spi: dw-mmio: remove message which is handled by coreAndy Shevchenko1-5/+0
devm_ioremap_resource() validates its parameters and issues an error message if needed. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-19spi: dw-mmio: convert to unified device property APIAndy Shevchenko1-4/+3
Convert the driver to use unfied device property API instead of OF one. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-21spi: dw: Allow interface drivers to limit data I/O to word sizesMichael van der Westhuizen1-0/+3
The commit dd11444327ce ("spi: dw-spi: Convert 16bit accesses to 32bit accesses") changed all 16bit accesses in the DW_apb_ssi driver to 32bit. This, unfortunately, breaks data register access on picoXcell, where the DW IP needs data register accesses to be word accesses (all other accesses appear to be OK). This change introduces a new master variable to allow interface drivers to specify that 16bit data transfer I/O is required. This change also introduces the ability to set this variable via device tree bindings in the MMIO interface driver. Both the core and the MMIO interface driver default to the current 32bit behaviour. Before this change, on a picoXcell pc3x3: spi_master spi32766: interrupt_transfer: fifo overrun/underrun m25p80 spi32766.0: error -5 reading 9f m25p80: probe of spi32766.0 failed with error -5 After this change: m25p80 spi32766.0: m25p40 (512 Kbytes) Fixes: dd11444327ce ("spi: dw-spi: Convert 16bit accesses to 32bit accesses") Signed-off-by: Michael van der Westhuizen <michael@smart-africa.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-20spi: drop owner assignment from platform_driversWolfram Sang1-1/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-07-03spi: dw-mmio: add devicetree supportSteffen Trumtrar1-1/+18
Allow probing the dw-mmio from devicetree. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-24spi: dw: add support for gpio controlled chip selectBaruch Siach1-0/+22
Also, use this opportunity to let spi_chip_sel() handle chip-select deactivation as well. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-03spi: dw-mmio: allow multiple instancesBaruch Siach1-1/+1
Use the platform_device id to uniquely identify each SPI master instance. Cc: Jean-Hugues Deschenes <jean-hugues.deschenes@octasic.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-31spi: dw-mmio: prepare the clock before enablingBaruch Siach1-3/+3
This is required for common clock support. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-31spi: dw: use managed resourcesBaruch Siach1-50/+20
Migrate mmio code and core driver to managed resources to reduce boilerplate error handling code. Also, handle clk_enable() failure while at it, and drop unused dw_spi iolen field. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-17spi: designware: delete premature free_irqJulia Lawall1-4/+1
Free_irq is not needed if there has been no request_irq. Free_irq is removed from both the probe and remove functions. The correct request_irq and free_irq appear to be in the add_host and remove_host functions in spi-dw.c. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e; @@ *e = platform_get_irq(...); ... when != request_irq(e,...) *free_irq(e,...) // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-05-13spi: remove unnecessary platform_set_drvdata()Jingoo Han1-2/+0
The driver core clears the driver data to NULL after device_release or on probe failure, since commit 0998d0631001288a5974afc0b2a5f568bcdecb4d (device-core: Ensure drvdata = NULL when no driver is bound). Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-12-07spi: Remove HOTPLUG section attributesGrant Likely1-3/+3
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Bill Pemberton has done most of the legwork on this series. I've used his script to purge the attributes from the drivers/gpio tree. Reported-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-10-31spi: Add module.h to implicit users in drivers/spiPaul Gortmaker1-0/+1
We are clipping down the presence of module.h, since it was everywhere. If you really need it, you better call it out, as per this changeset. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-25drivercore: Add helper macro for platform_driver boilerplateGrant Likely1-12/+2
For simple modules that contain a single platform_driver without any additional setup code then ends up being a block of duplicated boilerplate. This patch adds a new macro, module_platform_driver(), which replaces the module_init()/module_exit() registrations with template functions. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Reviewed-by: Magnus Damm <magnus.damm@gmail.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
2011-06-06spi: reorganize driversGrant Likely1-0/+151
Sort the SPI makefile and enforce the naming convention spi_*.c for spi drivers. This change also rolls the contents of atmel_spi.h into the .c file since there is only one user of that particular include file. v2: - Use 'spi-' prefix instead of 'spi_' to match what seems to be be the predominant pattern for subsystem prefixes. - Clean up filenames in Kconfig and header comment blocks Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-05 02:25:47 +0000