summaryrefslogtreecommitdiff
path: root/drivers/soc
AgeCommit message (Collapse)AuthorFilesLines
2021-02-26Merge tag 'for-linus' of git://github.com/openrisc/linuxLinus Torvalds2-75/+55
Pull OpenRISC updates from Stafford Horne: - Update for Litex SoC controller to support wider width registers as well as reset. - Refactor SMP code to use device tree to define possible cpus. - Update build including generating vmlinux.bin * tag 'for-linus' of git://github.com/openrisc/linux: openrisc: Use devicetree to determine present cpus drivers/soc/litex: Add restart handler openrisc: add arch/openrisc/Kbuild drivers/soc/litex: make 'litex_[set|get]_reg()' methods private drivers/soc/litex: support 32-bit subregisters, 64-bit CPUs drivers/soc/litex: s/LITEX_REG_SIZE/LITEX_SUBREG_ALIGN/g drivers/soc/litex: separate MMIO from subregister offset calculation drivers/soc/litex: move generic accessors to litex.h openrisc: restart: Call common handlers before hanging openrisc: Add vmlinux.bin target
2021-02-26Merge tag 'riscv-for-linus-5.12-mw0' of ↵Linus Torvalds9-282/+119
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V updates from Palmer Dabbelt: "A handful of new RISC-V related patches for this merge window: - A check to ensure drivers are properly using uaccess. This isn't manifesting with any of the drivers I'm currently using, but may catch errors in new drivers. - Some preliminary support for the FU740, along with the HiFive Unleashed it will appear on. - NUMA support for RISC-V, which involves making the arm64 code generic. - Support for kasan on the vmalloc region. - A handful of new drivers for the Kendryte K210, along with the DT plumbing required to boot on a handful of K210-based boards. - Support for allocating ASIDs. - Preliminary support for kernels larger than 128MiB. - Various other improvements to our KASAN support, including the utilization of huge pages when allocating the KASAN regions. We may have already found a bug with the KASAN_VMALLOC code, but it's passing my tests. There's a fix in the works, but that will probably miss the merge window. * tag 'riscv-for-linus-5.12-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (75 commits) riscv: Improve kasan population by using hugepages when possible riscv: Improve kasan population function riscv: Use KASAN_SHADOW_INIT define for kasan memory initialization riscv: Improve kasan definitions riscv: Get rid of MAX_EARLY_MAPPING_SIZE soc: canaan: Sort the Makefile alphabetically riscv: Disable KSAN_SANITIZE for vDSO riscv: Remove unnecessary declaration riscv: Add Canaan Kendryte K210 SD card defconfig riscv: Update Canaan Kendryte K210 defconfig riscv: Add Kendryte KD233 board device tree riscv: Add SiPeed MAIXDUINO board device tree riscv: Add SiPeed MAIX GO board device tree riscv: Add SiPeed MAIX DOCK board device tree riscv: Add SiPeed MAIX BiT board device tree riscv: Update Canaan Kendryte K210 device tree dt-bindings: add resets property to dw-apb-timer dt-bindings: fix sifive gpio properties dt-bindings: update sifive uart compatible string dt-bindings: update sifive clint compatible string ...
2021-02-22soc: canaan: Sort the Makefile alphabeticallyPalmer Dabbelt1-1/+1
The rest of these are alphabetically sorted, and leaving it this way causes a merge conflict. Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-02-22clk: Add RISC-V Canaan Kendryte K210 clock driverDamien Le Moal3-178/+47
Add a clock provider driver for the Canaan Kendryte K210 RISC-V SoC. This new driver with the compatible string "canaan,k210-clk" implements support for the full clock structure of the K210 SoC. Since it is required for the correct operation of the SoC, this driver is selected by default for compilation when the SOC_CANAAN option is selected. With this change, the k210-sysctl driver is turned into a simple platform driver which enables its power bus clock and triggers populating its child nodes. The sysctl driver retains the SOC early initialization code, but the implementation now relies on the new function k210_clk_early_init() provided by the new clk-k210 driver. The clock structure implemented and many of the coding ideas for the driver come from the work by Sean Anderson on the K210 support for the U-Boot project. Cc: Stephen Boyd <sboyd@kernel.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: linux-clk@vger.kernel.org Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-02-22Merge tag 'clk-for-linus' of ↵Linus Torvalds3-646/+0
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This is all driver updates, the majority of which is a bunch of new Qualcomm clk drivers that dominate the diffstat because we add support for six SoCs from that particular vendor. The other big change is the removal of various clk drivers that are no longer used now that the kernel is dropping support for those SoCs. Beyond that there's the usual non-critical fixes for existing drivers and a good number of patches from Lee Jones that cleanup a bunch of W=1 enabled builds. Removed Drivers: - Remove efm32 clk driver - Remove tango4 clk driver - Remove zte zx clk driver - Remove sirf prima2/atlast clk drivers - Remove u300 clk driver New Drivers: - PLL support on MStar/SigmaStar ARMv7 SoCs - CPU clks for Qualcomm SDX55 - GCC and RPMh clks for Qualcomm SC8180x and SC7280 SoCs - GCC clks for Qualcomm SM8350 - GPU clks for Qualcomm SDM660/SDM630 Updates: - Video clk fixups on Qualcomm SM8250 - Improvements for multimedia clks on Qualcomm MSM8998 - Fix many warnings with W=1 enabled builds under drivers/clk/ - Support crystal load capacitance for Versaclock VC5 - Add a "skip recall" DT binding for Silicon Labs' si570 to avoid glitches at boot - Convert Xilinx VCU clk driver to a proper clk provider driver - Expose Xilinx ZynqMP clk driver to more platforms - Amlogic pll driver fixup - Amlogic meson8b clock controller dt support clean up - Remove mipi clk from the Amlogic axg clock controller - New Rockchip rk3368 clock ids related to camera input - Use pr_notice() instead of pr_warn() on i.MX6Q pre-boot ldb_di_clk reparenting - A series from Liu Ying that adds some SCU clocks support for i.MX8qxp DC0/MIPI-LVDS subsystems - A series from Lucas Stach that adds PLL monitor clocks for i.MX8MQ, and clkout1/2 support for i.MX8MM/MN - Add I2c and Ethernet (RAVB) clocks on Renesas R-Car V3U - Add timer (TMU) clocks on most Renesas R-Car Gen3 SoCs - Add video-related (FCPVD/VSPD/VSPX), watchdog (RWDT), serial (HSCIF), pincontrol/GPIO (PFC/GPIO), SPI (MSIOF), SDHI, and DMA (SYS-DMAC) clocks on Renesas R-Car V3U - Add support for the USB 2.0 clock selector on Renesas RZ/G2 SoCs - Allwinner H616 SoC clk support" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (171 commits) clk: mstar: msc313-mpll: Fix format specifier clk: mstar: Allow MStar clk drivers to be compile tested clk: qoriq: use macros to generate pll_mask clk: qcom: Add Global Clock controller (GCC) driver for SC7280 dt-bindings: clock: Add SC7280 GCC clock binding clk: qcom: rpmh: Add support for RPMH clocks on SC7280 dt-bindings: clock: Add RPMHCC bindings for SC7280 clk: qcom: gcc-sm8350: add gdsc dt-bindings: clock: Add QCOM SDM630 and SDM660 graphics clock bindings clk: qcom: Add SDM660 GPU Clock Controller (GPUCC) driver clk: qcom: mmcc-msm8996: Migrate gfx3d clock to clk_rcg2_gfx3d clk: qcom: rcg2: Stop hardcoding gfx3d pingpong parent numbers dt-bindings: clock: Add support for the SDM630 and SDM660 mmcc clk: qcom: Add SDM660 Multimedia Clock Controller (MMCC) driver clk: qcom: gcc-sdm660: Mark GPU CFG AHB clock as critical clk: qcom: gcc-sdm660: Mark MMSS NoC CFG AHB clock as critical clk: qcom: gpucc-msm8998: Allow fabia gpupll0 rate setting clk: qcom: gpucc-msm8998: Add resets, cxc, fix flags on gpu_gx_gdsc clk: qcom: gdsc: Implement NO_RET_PERIPH flag clk: mstar: MStar/SigmaStar MPLL driver ...
2021-02-21Merge tag 'drm-next-2021-02-19' of git://anongit.freedesktop.org/drm/drmLinus Torvalds2-0/+475
Pull drm updates from Dave Airlie: "A pretty normal tree, lots of refactoring across the board, ttm, i915, nouveau, and bunch of features in various drivers. docs: - lots of updated docs core: - require crtc to have unique primary plane - fourcc macro fix - PCI bar quirk for bar resizing - don't sent hotplug on error - move vm code to legacy - nuke hose only used on old oboslete alpha dma-buf: - kernel doc updates - improved lock tracking dp/hdmi: - DP-HDMI2.1 protocol converter support ttm: - bo size handling cleanup - release a pinned bo warning - cleanup lru handler - avoid using pages with drm_prime_sg_to_page_addr_arrays cma-helper: - prime/mmap fixes bridge: - add DP support gma500: - remove gma3600 support i915: - try eDP fast/narrow link again with fallback - Intel eDP backlight control - replace display register read/write macros - refactor intel_display.c - display power improvements - HPD code cleanup - Rocketlake display fixes - Power/backlight/RPM fixes - DG1 display fix - IVB/BYT clear residuals security fix again - make i915 mitigations options via parameter - HSW GT1 GPU hangs fixes - DG1 workaround hang fixes - TGL DMAR hang avoidance - Lots of GT fixes - follow on fixes for residuals clear - gen7 per-engine-reset support - HDCP2.2 + HDCP1.4 GEN12 DP MST support - TGL clear color support - backlight refactoring - VRR/Adaptive sync enabling on DP/EDP for TGL+ - async flips for all ilk+ amdgpu: - rework IH ring handling (Vega/Navi) - rework HDP handling (Vega/Navi) - swSMU updates for renoir/vangogh - Sienna Cichild overdrive support - FP16 on DCE8-11 support - GPU reset on navy flounder/vangogh - SMU profile fixes for APU - SR-IOV fixes - Vangogh SMU fixes - fan speed control fixes amdkfd: - config handling fix - buffer free fix - recursive lock warnings fix nouveau: - Turing MMU fault recovery fixes - mDP connectors reporting fix - audio locking fixes - rework engines/instances code to support new scheme tegra: - VIC newer firmware support - display/gr2d fixes for older tegra - pm reference leak fix mediatek: - SOC MT8183 support - decouple sub driver + share mtk mutex driver radeon: - PCI resource fix for some platforms ingenic: - pm support - 8-bit delta RGB panels vmwgfx: - managed driver helpers vc4: - BCM2711 DSI1 support - converted to atomic helpers - enable 10/12 bpc outputs - gem prime mmap helpers - CEC fix omap: - use degamma table - CTM support - rework DSI support imx: - stack usage fixes - drm managed support - imx-tve clock provider leak fix - rcar-du: - default mode fixes - conversion to managed API hisilicon: - use simple encoder vkms: - writeback connector support d3: - BT2020 support" * tag 'drm-next-2021-02-19' of git://anongit.freedesktop.org/drm/drm: (1459 commits) drm/amdgpu: Set reference clock to 100Mhz on Renoir (v2) drm/radeon: OLAND boards don't have VCE drm/amdkfd: Fix recursive lock warnings drm/amd/display: Add FPU wrappers to dcn21_validate_bandwidth() drm/amd/display: Fix potential integer overflow drm/amdgpu/display: remove hdcp_srm sysfs on device removal drm/amdgpu: fix CGTS_TCC_DISABLE register offset on gfx10.3 drm/i915/gt: Correct surface base address for renderclear drm/i915: Disallow plane x+w>stride on ilk+ with X-tiling drm/nouveau/top/ga100: initial support drm/nouveau/top: add ioctrl/nvjpg drm/nouveau/privring: rename from ibus drm/nouveau/nvkm: remove nvkm_subdev.index drm/nouveau/nvkm: determine subdev id/order from layout drm/nouveau/vic: switch to instanced constructor drm/nouveau/sw: switch to instanced constructor drm/nouveau/sec2: switch to instanced constructor drm/nouveau/sec: switch to instanced constructor drm/nouveau/pm: switch to instanced constructor drm/nouveau/nvenc: switch to instanced constructor ...
2021-02-20Merge tag 'arm-drivers-v5.12' of ↵Linus Torvalds28-250/+1035
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "Updates for SoC specific drivers include a few subsystems that have their own maintainers but send them through the soc tree: SCMI firmware: - add support for a completion interrupt Reset controllers: - new driver for BCM4908 - new devm_reset_control_get_optional_exclusive_released() function Memory controllers: - Renesas RZ/G2 support - Tegra124 interconnect support - Allow more drivers to be loadable modules TEE/optee firmware: - minor code cleanup The other half of this is SoC specific drivers that do not belong into any other subsystem, most of them living in drivers/soc: - Allwinner/sunxi power management work - Allwinner H616 support - ASpeed AST2600 system identification support - AT91 SAMA7G5 SoC ID driver - AT91 SoC driver cleanups - Broadcom BCM4908 power management bus support - Marvell mbus cleanups - Mediatek MT8167 power domain support - Qualcomm socinfo driver support for PMIC - Qualcomm SoC identification for many more products - TI Keystone driver cleanups for PRUSS and elsewhere" * tag 'arm-drivers-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (89 commits) soc: aspeed: socinfo: Add new systems soc: aspeed: snoop: Add clock control logic memory: tegra186-emc: Replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE memory: samsung: exynos5422-dmc: Correct function names in kerneldoc memory: ti-emif-pm: Drop of_match_ptr from of_device_id table optee: simplify i2c access drivers: soc: atmel: fix type for same7 tee: optee: remove need_resched() before cond_resched() soc: qcom: ocmem: don't return NULL in of_get_ocmem optee: sync OP-TEE headers tee: optee: fix 'physical' typos drivers: optee: use flexible-array member instead of zero-length array tee: fix some comment typos in header files soc: ti: k3-ringacc: Use of_device_get_match_data() soc: ti: pruss: Refactor the CFG sub-module init soc: mediatek: pm-domains: Don't print an error if child domain is deferred soc: mediatek: pm-domains: Add domain regulator supply dt-bindings: power: Add domain regulator supply soc: mediatek: cmdq: Remove cmdq_pkt_flush() soc: mediatek: pm-domains: Add support for mt8167 ...
2021-02-20Merge tag 'arm-soc-v5.12' of ↵Linus Torvalds7-137/+142
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC updates from Arnd Bergmann: "This is mostly 32-bit code for SoC platforms, and looks smaller than any such branch I remember from previous kernels, as most of this is now handled in other subsystems for modern platforms: - Minor bugfixes and Kconfig updates for Tegra, Broadcom, i.MX, Renesas, and Samsung - Updates to the MAINTAINERS listing for Actions, OMAP, and Samsung - Samsung SoC driver updates to make them loadable modules" * tag 'arm-soc-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: MAINTAINERS: arm: samsung: include S3C headers in platform entry MAINTAINERS: Add linux-actions ML for Actions Semi Arch ARM: s3c: irq-s3c24xx: staticize local functions ARM: s3c: irq-s3c24xx: include headers for missing declarations ARM: s3c: fix fiq for clang IAS ARM: imx: Remove unused IMX_GPIO_NR() macro soc: renesas: rcar-sysc: Mark device node OF_POPULATED after init ARM: OMAP2+: fix spellint typo MAINTAINERS: Update address for OMAP GPMC driver soc: renesas: rcar-sysc: Use readl_poll_timeout_atomic() ARM: bcm: Select BRCMSTB_L2_IRQ for bcm2835 ARM: brcmstb: Add debug UART entry for 72116 ARM: tegra: Don't enable unused PLLs on resume from suspend soc: samsung: pm_domains: Convert to regular platform driver soc: samsung: exynos-chipid: correct helpers __init annotation ARM: mach-imx: imx6ul: Print SOC revision on boot ARM: imx: mach-imx6ul: remove 14x14 EVK specific PHY fixup soc: samsung: exynos-chipid: convert to driver and merge exynos-asv soc: samsung: exynos-asv: handle reading revision register error soc: samsung: exynos-asv: don't defer early on not-supported SoCs
2021-02-20Merge tag 'arm-platform-removal-v5.12' of ↵Linus Torvalds7-389/+0
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC platform removals from Arnd Bergmann: "There are a lot of platforms that have not seen any interesting code changes in the past five years or more. I made a list and asked around which ones are no longer in use, and received confirmation about six ARM platforms and the TI C6x architecture that have all reached the end of their life upstream, with no known users remaining: - efm32 - added in 2011, first Cortex-M, no notable changes after 2013 - picoxcell - added in 2011, abandoned after 2012 acquisition - prima2 - added in 20111, no notable changes since 2015 - tango - added in 2015, sporadic changes until 2017, but abandoned - u300 - added in 2009, no notable changes since 2013 - zx - added in 2015 for both 32, 2017 for 64 bit, no notable changes - arch/c6x - added in 2011, but work stalled soon after that A number of other platforms on the original list turned out to still have users. In some cases there are out-of-tree patches and users that plan to contribute them in the future, in other cases the code is complete and works reliably" Link: https://lore.kernel.org/lkml/CAK8P3a2DZ8xQp7R=H=wewHnT2=a_=M53QsZOueMVEf7tOZLKNg@mail.gmail.com/ * tag 'arm-platform-removal-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: remove u300 platform ARM: remove tango platform ARM: remove zte zx platform ARM: remove sirf prima2/atlas platforms c6x: remove architecture MAINTAINERS: Remove deleted platform efm32 ARM: drop efm32 platform ARM: Remove PicoXcell platform support ARM: dts: Remove PicoXcell platforms
2021-02-11Merge tag 'aspeed-5.12-soc' of ↵Arnd Bergmann2-11/+52
git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/drivers ASPEED soc driver updates for 5.12 - Clock control logic for LPC snoop driver - New system ids for AST2600 variants * tag 'aspeed-5.12-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed: soc: aspeed: socinfo: Add new systems soc: aspeed: snoop: Add clock control logic Link: https://lore.kernel.org/r/CACPK8Xf+4VkWC6rkHhsWdwhaLjy2Az=GAHaEe=SvOiUc_OGKSQ@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-02-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller2-5/+11
2021-02-10soc: aspeed: socinfo: Add new systemsJoel Stanley1-8/+25
Aspeed's u-boot sdk has been updated with the SoC IDs for the AST2605 variant, as well as A2 and A3 variants of the 2600 family. >From u-boot's arch/arm/mach-aspeed/ast2600/scu_info.c: SOC_ID("AST2600-A0", 0x0500030305000303), SOC_ID("AST2600-A1", 0x0501030305010303), SOC_ID("AST2620-A1", 0x0501020305010203), SOC_ID("AST2600-A2", 0x0502030305010303), SOC_ID("AST2620-A2", 0x0502020305010203), SOC_ID("AST2605-A2", 0x0502010305010103), SOC_ID("AST2600-A3", 0x0503030305030303), SOC_ID("AST2620-A3", 0x0503020305030203), SOC_ID("AST2605-A3", 0x0503010305030103), Fixes: e0218dca5787 ("soc: aspeed: Add soc info driver") Link: https://lore.kernel.org/r/20210210114651.334324-1-joel@jms.id.au Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-02-10soc: aspeed: snoop: Add clock control logicJae Hyun Yoo1-3/+27
If LPC SNOOP driver is registered ahead of lpc-ctrl module, LPC SNOOP block will be enabled without heart beating of LCLK until lpc-ctrl enables the LCLK. This issue causes improper handling on host interrupts when the host sends interrupt in that time frame. Then kernel eventually forcibly disables the interrupt with dumping stack and printing a 'nobody cared this irq' message out. To prevent this issue, all LPC sub-nodes should enable LCLK individually so this patch adds clock control logic into the LPC SNOOP driver. Fixes: 3772e5da4454 ("drivers/misc: Aspeed LPC snoop output using misc chardev") Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@intel.com> Signed-off-by: Vernon Mauery <vernon.mauery@linux.intel.com> Signed-off-by: John Wang <wangzhiqiang.bj@bytedance.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20201208091748.1920-1-wangzhiqiang.bj@bytedance.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-02-10Merge tag 'imx-drivers-5.12' of ↵Arnd Bergmann1-12/+72
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers i.MX drivers change for 5.12: - Change soc-imx8m to use platform driver, so that defer probe can be used to resolve dependency on OCOTP clock. * tag 'imx-drivers-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: imx8m: change to use platform driver Link: https://lore.kernel.org/r/20210204120150.26186-1-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-02-10Merge tag 'qcom-drivers-for-5.12' of ↵Arnd Bergmann7-42/+178
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers Qualcomm driver updates for 5.12 The socinfo driver gains support for dumping information about the platform's PMICs, as well as new definitions for a number of platforms. The LLCC driver gains SM8250 support, AOSS QMP gains SM8350 support and the RPMPD driver gains support for MSM8994 power domains. In addition to this it contains a few minor fixes in the ocmem, rpmh and llcc drivers. * tag 'qcom-drivers-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: soc: qcom: ocmem: don't return NULL in of_get_ocmem soc: qcom: socinfo: Remove unwanted le32_to_cpu() soc: qcom: aoss: Add SM8350 compatible drivers: soc: qcom: rpmpd: Add msm8994 RPM Power Domains soc: qcom: socinfo: Fix an off by one in qcom_show_pmic_model() soc: qcom: socinfo: Fix off-by-one array index bounds check soc: qcom: socinfo: Add MDM9607 IDs soc: qcom: socinfo: Add SoC IDs for APQ/MSM8998 soc: qcom: socinfo: Add SoC IDs for 630 family soc: qcom: socinfo: Open read access to all for debugfs soc: qcom: socinfo: add info from PMIC models array soc: qcom: socinfo: add several PMIC IDs soc: qcom: socinfo: add qrb5165 SoC ID soc: qcom: rpmh: Remove serialization of TCS commands soc: qcom: smem: use %*ph to print small buffer dt-bindings: soc: qcom: convert qcom,smem bindings to yaml drivers: qcom: rpmh-rsc: Do not read back the register write on trigger soc: qcom: llcc-qcom: Add support for SM8250 SoC soc: qcom: llcc-qcom: Extract major hardware version dt-bindings: msm: Add LLCC for SM8250 Link: https://lore.kernel.org/r/20210204052258.388890-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-02-08clk: xilinx: move xlnx_vcu clock driver from socMichael Tretter3-761/+0
The xlnx_vcu driver is actually a clock controller driver which provides clocks that can be used by a driver for the encoder/decoder units. There is no reason to keep this driver in soc. Move the driver to clk. NOTE: The register mapping actually contains registers for AXI performance monitoring, but these are not used by the driver. Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Acked-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/20210121071659.1226489-16-m.tretter@pengutronix.de Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-08soc: xilinx: vcu: fix alignment to open parenthesisMichael Tretter1-1/+1
Fixes the following checkpatch check: CHECK: Alignment should match open parenthesis #610: FILE: drivers/soc/xilinx/xlnx_vcu.c:610: + xvcu->vcu_slcr_ba = devm_ioremap(&pdev->dev, res->start, + resource_size(res)); Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Acked-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/20210121071659.1226489-15-m.tretter@pengutronix.de Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-08soc: xilinx: vcu: fix repeated word the in commentMichael Tretter1-1/+1
Fixes the following checkpatch warning: WARNING: Possible repeated word: 'the' #703: FILE: drivers/soc/xilinx/xlnx_vcu.c:703: + /* Add the the Gasket isolation and put the VCU in reset. */ Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Acked-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/20210121071659.1226489-14-m.tretter@pengutronix.de Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-08soc: xilinx: vcu: use bitfields for register definitionMichael Tretter1-81/+34
This makes the register accesses more readable and is closer to what is usually used in the kernel. Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/20210121071659.1226489-13-m.tretter@pengutronix.de Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-08soc: xilinx: vcu: remove calculation of PLL configurationMichael Tretter1-117/+0
As the consumers are now responsible for setting the clock rate via clock framework, the clock rate is now calculated using round_rate and the driver does not need to calculate the clock rate beforehand. Remove the code that calculates the PLL configuration. Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Acked-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/20210121071659.1226489-12-m.tretter@pengutronix.de Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-08soc: xilinx: vcu: make the PLL configurableMichael Tretter1-37/+103
Do not configure the PLL when probing the driver, but register the clock in the clock framework and do the configuration based on the respective callbacks. This is necessary to allow the consumers, i.e., encoder and decoder drivers, of the xlnx_vcu clock provider to set the clock rate and actually enable the clocks without relying on some pre-configuration. Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Acked-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/20210121071659.1226489-11-m.tretter@pengutronix.de Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-08soc: xilinx: vcu: make pll post divider explicitMichael Tretter1-16/+36
According to the downstream driver documentation due to timing constraints the output divider of the PLL has to be set to 1/2. Add a helper function for that check instead of burying the code in one large setup function. The bit is undocumented and marked as reserved in the register reference. Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Acked-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/20210121071659.1226489-10-m.tretter@pengutronix.de Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-08soc: xilinx: vcu: implement clock provider for output clocksMichael Tretter1-37/+160
The VCU System-Level Control uses an internal PLL to drive the core and MCU clock for the allegro encoder and decoder based on an external PL clock. In order be able to ensure that the clocks are enabled and to get their rate from other drivers, the module must implement a clock provider and register the clocks at the common clock framework. Other drivers are then able to access the clock via devicetree bindings. Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Acked-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/20210121071659.1226489-9-m.tretter@pengutronix.de Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-08soc: xilinx: vcu: register PLL as fixed rate clockMichael Tretter2-2/+19
Currently, xvcu_pll_set_rate configures the PLL to a clock rate that is pre-calculated when probing the driver. To still make the clock framework aware of the PLL and to allow to configure other clocks based on the PLL rate, register the PLL as a fixed rate clock. Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Acked-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/20210121071659.1226489-8-m.tretter@pengutronix.de Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-08soc: xilinx: vcu: implement PLL disableMichael Tretter1-9/+19
The disabling of the PLL is not fully implemented, because according to the ZynqMP register reference the RESET, POR_IN and PWR_POR bits have to be set to bring the PLL into reset. Set the bits to disable the PLL. Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Acked-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/20210121071659.1226489-7-m.tretter@pengutronix.de Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-08soc: xilinx: vcu: add helpers for configuring PLLMichael Tretter1-67/+104
The xvcu_set_vcu_pll_info function sets the rate of the PLL and enables it, which makes it difficult to cleanly convert the driver to the common clock framework. Split the function and add separate functions for setting the rate, enabling the clock and disabling the clock. Also move the enable of the reference clock from probe to the helper that enables the PLL. Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Acked-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/20210121071659.1226489-6-m.tretter@pengutronix.de Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-08soc: xilinx: vcu: add helper to wait for PLL lockedMichael Tretter1-19/+27
Extract a helper function to wait until the PLL is locked. Also, disabling the bypass was buried in the exit path on the wait loop. Separate the different steps and add a helper function to make the code more readable. Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Acked-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/20210121071659.1226489-5-m.tretter@pengutronix.de Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-08soc: xilinx: vcu: drop coreclk from struct xlnx_vcuMichael Tretter1-4/+2
The coreclk field is newer read after being written to xlnx_vcu. Remove the coreclk field from the xlnx_vcu and use a function local variable instead. Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Acked-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/20210121071659.1226489-4-m.tretter@pengutronix.de Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-02-05Merge tag 'mediatek-drm-next-5.12' of ↵Dave Airlie2-0/+475
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next Mediatek DRM Next for Linux 5.12 1. Decouple Mediatek DRM sub driver 2. Share mtk mutex driver for both DRM and MDP 3. Add support for SoC MT8183 Signed-off-by: Dave Airlie <airlied@redhat.com> From: Chun-Kuang Hu <chunkuang.hu@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210204151750.7550-1-chunkuang.hu@kernel.org
2021-02-04drivers: soc: atmel: fix type for same7Arnd Bergmann1-1/+1
A missing comma caused a build failure: drivers/soc/atmel/soc.c:196:24: error: too few arguments provided to function-like macro invocation Fixes: af3a10513cd6 ("drivers: soc: atmel: add per soc id and version match masks") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-02-04soc / drm: mediatek: Move mtk mutex driver to soc folderCK Hu2-0/+475
mtk mutex is used by DRM and MDP driver, and its function is SoC-specific, so move it to soc folder. Signed-off-by: CK Hu <ck.hu@mediatek.com> Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
2021-02-03Merge tag 'arm-soc-fixes-v5.11-3' of ↵Linus Torvalds2-5/+11
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "The code fixes in this round are all for the Texas Instruments OMAP platform, addressing several regressions related to the ti-sysc interconnect changes that was merged in linux-5.11 and one recently introduced RCU usage warning. Tero Kristo updates his maintainer file entries as he is changing to a new employer. The other changes are for devicetree files across eight different platforms: TI OMAP: - multiple gpio related one-line fixes Allwinner/sunxi: - ARM: dts: sun7i: a20: bananapro: Fix ethernet phy-mode - soc: sunxi: mbus: Remove DE2 display engine compatibles NXP lpc32xx: - ARM: dts: lpc32xx: Revert set default clock rate of HCLK PLL STMicroelectronics stm32 - multiple minor fixes for DHCOM/DHCOR boards NXP Layerscape: - Fix DCFG address range on LS1046A SoC Amlogic meson: - fix reboot issue on odroid C4 - revert an ethernet change that caused a regression - meson-g12: Set FL-adj property value Rockchip: - multiple minor fixes on 64-bit rockchip machines Qualcomm: - Regression fixes for Lenovo Yoga touchpad and for interconnect configuration - Boot fixes for 'LPASS' clock configuration on two machines" * tag 'arm-soc-fixes-v5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (31 commits) ARM: dts: lpc32xx: Revert set default clock rate of HCLK PLL ARM: dts: sun7i: a20: bananapro: Fix ethernet phy-mode arm64: dts: ls1046a: fix dcfg address range soc: sunxi: mbus: Remove DE2 display engine compatibles arm64: dts: meson: switch TFLASH_VDD_EN pin to open drain on Odroid-C4 Revert "arm64: dts: amlogic: add missing ethernet reset ID" arm64: dts: rockchip: Disable display for NanoPi R2S ARM: dts: omap4-droid4: Fix lost keypad slide interrupts for droid4 arm64: dts: rockchip: remove interrupt-names property from rk3399 vdec node drivers: bus: simple-pm-bus: Fix compatibility with simple-bus for auxdata ARM: OMAP2+: Fix booting for am335x after moving to simple-pm-bus ARM: OMAP2+: Fix suspcious RCU usage splats for omap_enter_idle_coupled ARM: dts: stm32: Fix GPIO hog flags on DHCOM DRC02 ARM: dts: stm32: Fix GPIO hog flags on DHCOM PicoITX ARM: dts: stm32: Fix GPIO hog names on DHCOM ARM: dts: stm32: Disable optional TSC2004 on DRC02 board ARM: dts: stm32: Disable WP on DHCOM uSD slot ARM: dts: stm32: Connect card-detect signal on DHCOM ARM: dts: stm32: Fix polarity of the DH DRC02 uSD card detect arm64: dts: qcom: sdm845: Reserve LPASS clocks in gcc ...
2021-02-03Merge tag 'sunxi-fixes-for-5.11-2' of ↵Arnd Bergmann1-5/+0
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes One fix for a phy-mode ethernet issue, and one to fix the display output on SoCs with the Display Engine 2 * tag 'sunxi-fixes-for-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sun7i: a20: bananapro: Fix ethernet phy-mode soc: sunxi: mbus: Remove DE2 display engine compatibles Link: https://lore.kernel.org/r/f8298059-f9ca-43b4-9e29-35bc0e0c9b15.lettre@localhost Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-02-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+1
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-02Merge tag 'v5.11-next-soc' of ↵Arnd Bergmann5-35/+137
git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/drivers pm-domains: - add support for MT8167 - add support for regulator needed by a PM domain - make error message in deferred probe case better cmdq-helper: - remove arch specific flush function, use mailbox rx_callback instead * tag 'v5.11-next-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: soc: mediatek: pm-domains: Don't print an error if child domain is deferred soc: mediatek: pm-domains: Add domain regulator supply dt-bindings: power: Add domain regulator supply soc: mediatek: cmdq: Remove cmdq_pkt_flush() soc: mediatek: pm-domains: Add support for mt8167 dt-bindings: power: Add MT8167 power domains Link: https://lore.kernel.org/r/5faa52c2-0ddb-b809-7444-ce6f6ff6d8ad@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-02-02soc: qcom: ocmem: don't return NULL in of_get_ocmemLuca Weiss1-1/+7
If ocmem probe fails for whatever reason, of_get_ocmem returned NULL. Without this, users must check for both NULL and IS_ERR on the returned pointer - which didn't happen in drivers/gpu/drm/msm/adreno/adreno_gpu.c leading to a NULL pointer dereference. Reviewed-by: Brian Masney <masneyb@onstation.org> Fixes: 88c1e9404f1d ("soc: qcom: add OCMEM driver") Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Link: https://lore.kernel.org/r/20210130142349.53335-1-luca@z3ntu.xyz Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-02-02Merge tag 'drivers_soc_for_5.12' of ↵Arnd Bergmann5-46/+61
git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into arm/drivers drivers: soc: Keystone update for v5.12 Updates include: - Navigator refcount correction - probe fix in pm driver - fix clock init for PRUSS - PRUSS binding doc update - of_device_get_match_data() use in ringacc * tag 'drivers_soc_for_5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone: soc: ti: k3-ringacc: Use of_device_get_match_data() soc: ti: pruss: Refactor the CFG sub-module init dt-bindings: soc: ti: Update TI PRUSS bindings about schemas to include soc: ti: pruss: Correct the pruss_clk_init error trace text soc: ti: pm33xx: Fix some resource leak in the error handling paths of the probe function soc: ti: knav_qmss: Put refcount for dev node in failure case Link: https://lore.kernel.org/r/1612156854-10929-1-git-send-email-santosh.shilimkar@oracle.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-02-02Merge tag 'arm-soc/for-5.12/drivers' of https://github.com/Broadcom/stblinux ↵Arnd Bergmann5-18/+344
into arm/drivers This pull request contains Broadcom SoCs drivers changes for 5.12, please pull the following: - Rafal adds support for the Power Management Bus (PMB) which is used in a variety of DSL/Cable modem/STB SoCs with a primary target being the 4908 Wi-Fi SoC from the DSL organization. He also adds empty stubs to get the chip identification (family and revision) to permit the Broadcom STB USB PHY driver from being decoupled from ARCH_BRCMSTB - Florian removes an unused function and its header * tag 'arm-soc/for-5.12/drivers' of https://github.com/Broadcom/stblinux: soc: bcm: brcmstb: Remove soc_is_brcmstb() soc: bcm: brcmstb: add stubs for getting platform IDs soc: bcm: add PM driver for Broadcom's PMB dt-bindings: power: document Broadcom's PMB binding Link: https://lore.kernel.org/r/20210131221721.685974-5-f.fainelli@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-02-02Merge tag 'sunxi-drivers-for-5.12' of ↵Arnd Bergmann1-8/+23
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/drivers Some new drivers changes for the Allwinner SoCs, but mostly runtime_pm and suspend / resume support for our RSB bus, and support for the H616 * tag 'sunxi-drivers-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: dt-bindings: bus: rsb: Add H616 compatible string soc: sunxi: sram: Add support for more than one EMAC clock dt-bindings: sram: sunxi-sram: Add H616 compatible string mfd/bus: sunxi-rsb: Make .remove() callback return void bus: sunxi-rsb: Implement runtime power management bus: sunxi-rsb: Implement suspend/resume/shutdown callbacks bus: sunxi-rsb: Split out controller init/exit functions bus: sunxi-rsb: Move OF match table Link: https://lore.kernel.org/r/91f2980f-266f-41f2-ba10-5a395625498c.lettre@localhost Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-01-31soc: ti: k3-ringacc: Use of_device_get_match_data()Suman Anna1-4/+3
Simplify the retrieval of getting the match data in the probe function by directly using of_device_get_match_data() instead of using of_match_node() and getting data. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2021-01-31soc: ti: pruss: Refactor the CFG sub-module initSuman Anna1-41/+50
The CFG sub-module is not present on some earlier SoCs like the DA850/OMAPL-138 in the TI Davinci family. Refactor out the CFG sub-module parse and initialization logic into a separate function to make it easier to add logic for the PRUSS IP on the above legacy SoC families. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
2021-01-31soc: mediatek: pm-domains: Don't print an error if child domain is deferredEnric Balletbo i Serra1-2/+2
Child domains can be deferred by the core because one of its resources is not available yet, in such case, it will print an error, but later it will succeed to probe. Fix that using the dev_err_probe() function so it only prints an error on a real error. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Hsin-Yi Wang <hsinyi@chromium.org> Link: https://lore.kernel.org/r/20210113213012.67643-1-enric.balletbo@collabora.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2021-01-31soc: mediatek: pm-domains: Add domain regulator supplyHsin-Yi Wang3-1/+43
Some power domains (eg. mfg) needs to turn on power supply before power on. Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: Nicolas Boichat <drinkcat@chromium.org> Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Link: https://lore.kernel.org/r/20210129101208.2625249-3-hsinyi@chromium.org Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2021-01-31soc: mediatek: cmdq: Remove cmdq_pkt_flush()Chun-Kuang Hu1-32/+0
rx_callback is a standard mailbox callback mechanism and could cover the function of proprietary cmdq_task_cb, so it is better to use the standard one instead of the proprietary one. But register rx_callback should before mbox_request_channel(), so remove cmdq_pkt_flush() and let client driver implement its own synchronous flush. Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> Link: https://lore.kernel.org/r/20201202235856.7652-1-chunkuang.hu@kernel.org Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2021-01-31soc: mediatek: pm-domains: Add support for mt8167Fabien Parent3-0/+92
Add the needed board data to support mt8167 SoC. Signed-off-by: Fabien Parent <fparent@baylibre.com> Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Link: https://lore.kernel.org/r/20201209133238.384030-2-fparent@baylibre.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2021-01-30Merge tag 'for-linus' of git://github.com/openrisc/linuxLinus Torvalds1-0/+1
Pull OpenRISC fix from Stafford Horne: "Fix config dependencies for Litex SOC driver causing issues on um" * tag 'for-linus' of git://github.com/openrisc/linux: soc: litex: Properly depend on HAS_IOMEM
2021-01-30soc: litex: Properly depend on HAS_IOMEMDavid Gow1-0/+1
The LiteX SOC controller driver makes use of IOMEM functions like devm_platform_ioremap_resource(), which are only available if CONFIG_HAS_IOMEM is defined. This causes the driver to be enable under make ARCH=um allyesconfig, even though it won't build. By adding a dependency on HAS_IOMEM, the driver will not be enabled on architectures which don't support it. Fixes: 22447a99c97e ("drivers/soc/litex: add LiteX SoC Controller driver") Signed-off-by: David Gow <davidgow@google.com> [shorne@gmail.com: Fix typo in commit message pointed out in review] Signed-off-by: Stafford Horne <shorne@gmail.com>
2021-01-29Merge tag 'renesas-drivers-for-v5.12-tag1' of ↵Arnd Bergmann1-20/+17
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/soc Renesas driver updates for v5.12 - Miscellaneous fixes and improvements. * tag 'renesas-drivers-for-v5.12-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: soc: renesas: rcar-sysc: Mark device node OF_POPULATED after init soc: renesas: rcar-sysc: Use readl_poll_timeout_atomic() Link: https://lore.kernel.org/r/20210129090815.2552425-3-geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-01-29soc: renesas: rcar-sysc: Mark device node OF_POPULATED after initGeert Uytterhoeven1-0/+2
The R-Car System Controller (SYSC) driver registers PM domains from an early_initcall(). It does not use a platform driver, as secondary CPU startup on R-Car H1 needs to control the CPU power domains, before initialization of the driver framework. As fw_devlink only considers devices, it does not know that the System Controller is ready. Hence probing of on-chip devices that are part of the SYSC PM domain fails if fw_devlink is enabled: probe deferral - supplier e6180000.system-controller not ready Fix this by setting the OF_POPULATED flag for the SYSC device node after successful initialization. This will make of_link_to_phandle() ignore the SYSC device node as a dependency, and consumer devices will be probed again. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20210128082847.2205950-1-geert+renesas@glider.be
2021-01-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski3-2/+16
drivers/net/can/dev.c b552766c872f ("can: dev: prevent potential information leak in can_fill_info()") 3e77f70e7345 ("can: dev: move driver related infrastructure into separate subdir") 0a042c6ec991 ("can: dev: move netlink related code into seperate file") Code move. drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c 57ac4a31c483 ("net/mlx5e: Correctly handle changing the number of queues when the interface is down") 214baf22870c ("net/mlx5e: Support HTB offload") Adjacent code changes net/switchdev/switchdev.c 20776b465c0c ("net: switchdev: don't set port_obj_info->handled true when -EOPNOTSUPP") ffb68fc58e96 ("net: switchdev: remove the transaction structure from port object notifiers") bae33f2b5afe ("net: switchdev: remove the transaction structure from port attributes") Transaction parameter gets dropped otherwise keep the fix. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-21 03:33:17 +0000