summaryrefslogtreecommitdiff
path: root/drivers/soc/imx
AgeCommit message (Collapse)AuthorFilesLines
2018-10-01soc: imx: gpcv2: Switch to SPDX identifierFabio Estevam1-7/+1
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-10-01soc: imx: gpc: Switch to SPDX identifierFabio Estevam1-7/+1
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-10-01soc: imx: gpcv2: make pgc driver more generic for other i.MX platformsAnson Huang1-29/+43
i.MX8MQ and i.MX8MM share same gpc module with i.MX7D, they can reuse gpcv2 pgc driver for power domain control, this patch renames all functions and structure definitions started with "imx7" to "imx", and use .data in imx_gpcv2_dt_ids[] to pass platform specific power domain data for power domain driver, thus make gpcv2 pgc driver more generic for i.MX platforms. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Acked-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-10-01soc: imx: gpcv2: use A_CORE instread of A7 for more i.MX platformsAnson Huang1-10/+10
gpcv2 driver is NOT just used on i.MX7D which has Cortex-A7 cores, but also on i.MX8MQ/i.MX8MM platforms which use Cortex-A53 cores, so let's use A_CORE instread of A7 to avoid confusion. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Acked-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-03soc: imx: gpc: use GPC_PGC_DOMAIN_* indexesSven Schmitt1-6/+10
Use GPC_PGC_DOMAIN_* indexes consistent. Signed-off-by: Sven Schmitt <sven.schmitt@mixed-mode.de> Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-03soc: imx: gpc: fix PDN delaySven Schmitt1-1/+1
imx6_pm_domain_power_off() reads iso and iso2sw from GPC_PGC_PUPSCR_OFFS which stores the power up delays. So use GPC_PGC_PDNSCR_OFFS for the correct delays. Signed-off-by: Sven Schmitt <sven.schmitt@mixed-mode.de> Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-08-23Merge tag 'armsoc-drivers' of ↵Linus Torvalds1-6/+12
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "Some of the larger changes this merge window: - Removal of drivers for Exynos5440, a Samsung SoC that never saw widespread use. - Uniphier support for USB3 and SPI reset handling - Syste control and SRAM drivers and bindings for Allwinner platforms - Qualcomm AOSS (Always-on subsystem) reset controller drivers - Raspberry Pi hwmon driver for voltage - Mediatek pwrap (pmic) support for MT6797 SoC" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (52 commits) drivers/firmware: psci_checker: stash and use topology_core_cpumask for hotplug tests soc: fsl: cleanup Kconfig menu soc: fsl: dpio: Convert DPIO documentation to .rst staging: fsl-mc: Remove remaining files staging: fsl-mc: Move DPIO from staging to drivers/soc/fsl staging: fsl-dpaa2: eth: move generic FD defines to DPIO soc: fsl: qe: gpio: Add qe_gpio_set_multiple usb: host: exynos: Remove support for Exynos5440 clk: samsung: Remove support for Exynos5440 soc: sunxi: Add the A13, A23 and H3 system control compatibles reset: uniphier: add reset control support for SPI cpufreq: exynos: Remove support for Exynos5440 ata: ahci-platform: Remove support for Exynos5440 soc: imx6qp: Use GENPD_FLAG_ALWAYS_ON for PU errata soc: mediatek: pwrap: add mt6351 driver for mt6797 SoCs soc: mediatek: pwrap: add pwrap driver for mt6797 SoCs soc: mediatek: pwrap: fix cipher init setting error dt-bindings: pwrap: mediatek: add pwrap support for MT6797 reset: uniphier: add USB3 core reset control dt-bindings: reset: uniphier: add USB3 core reset support ...
2018-08-14Merge branches 'pm-core', 'pm-domains', 'pm-sleep', 'acpi-pm' and 'pm-cpuidle'Rafael J. Wysocki1-1/+1
Merge changes in the PM core, system-wide PM infrastructure, generic power domains (genpd) framework, ACPI PM infrastructure and cpuidle for 4.19. * pm-core: driver core: Add flag to autoremove device link on supplier unbind driver core: Rename flag AUTOREMOVE to AUTOREMOVE_CONSUMER * pm-domains: PM / Domains: Introduce dev_pm_domain_attach_by_name() PM / Domains: Introduce option to attach a device by name to genpd PM / Domains: dt: Add a power-domain-names property * pm-sleep: PM / reboot: Eliminate race between reboot and suspend PM / hibernate: Mark expected switch fall-through x86/power/hibernate_64: Remove VLA usage PM / hibernate: cast PAGE_SIZE to int when comparing with error code * acpi-pm: ACPI / PM: save NVS memory for ASUS 1025C laptop ACPI / PM: Default to s2idle in all machines supporting LP S0 * pm-cpuidle: ARM: cpuidle: silence error on driver registration failure
2018-07-21Merge tag 'imx-drivers-4.19' of ↵Olof Johansson1-6/+12
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/drivers i.MX drivers update for 4.19: - Handle i.MX6SL chip errata ERR006287 in the safest possible way by keeping the DISP domain always-on, because Upon resuming from power gating, the modules in the display power domain (eLCDIF, EPDC, PXP and SPDC) might fail to perform register reads correctly. - Use GENPD_FLAG_ALWAYS_ON flag for i.MX6QP PU ERR009619 handling. It is functionally identical to the exsiting implementation but simpler and slightly faster. * tag 'imx-drivers-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: imx6qp: Use GENPD_FLAG_ALWAYS_ON for PU errata soc: imx: gpc: Disable 6sl display power gating for ERR006287 Signed-off-by: Olof Johansson <olof@lixom.net>
2018-07-19soc: imx: gpc: restrict register range for regmap accessAnson Huang1-0/+21
GPC registers are NOT continuous, some registers are reserved and accessing them from userspace will trigger external abort, add regmap register access table to avoid below abort: root@imx6slevk:~# cat /sys/kernel/debug/regmap/20dc000.gpc/registers [ 108.480477] Unhandled fault: imprecise external abort (0x1406) at 0xb6db5004 [ 108.487985] pgd = 42b54bfd [ 108.490741] [b6db5004] *pgd=ba1b7831 [ 108.494386] Internal error: : 1406 [#1] SMP ARM [ 108.498943] Modules linked in: [ 108.502043] CPU: 0 PID: 389 Comm: cat Not tainted 4.18.0-rc1-00074-gc9f1f60-dirty #482 [ 108.509982] Hardware name: Freescale i.MX6 SoloLite (Device Tree) [ 108.516123] PC is at regmap_mmio_read32le+0x20/0x24 [ 108.521031] LR is at regmap_mmio_read+0x40/0x60 [ 108.525586] pc : [<c059cf74>] lr : [<c059d1ac>] psr: 20060093 [ 108.531875] sp : eccf1d98 ip : eccf1da8 fp : eccf1da4 [ 108.537122] r10: ec2d3800 r9 : eccf1f60 r8 : ecfc0000 [ 108.542370] r7 : eccf1e2c r6 : eccf1e2c r5 : 00000028 r4 : ec338e00 [ 108.548920] r3 : 00000000 r2 : eccf1e2c r1 : f0980028 r0 : 00000000 [ 108.555474] Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none [ 108.562720] Control: 10c5387d Table: acf4004a DAC: 00000051 [ 108.568491] Process cat (pid: 389, stack limit = 0xd4318a65) [ 108.574174] Stack: (0xeccf1d98 to 0xeccf2000) Fixes: 721cabf6c660 ("soc: imx: move PGC handling to a new GPC driver") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-07-17soc: imx6qp: Use GENPD_FLAG_ALWAYS_ON for PU errataLeonard Crestez1-6/+2
This is functionally identical but simpler and slightly faster. The PU domain is turned on at boot time and never turned off. In the current implementation the pm core will repeatedly call power_off when the domain is unused and get -EBUSY back. If the domain is marked as "always on" instead the pm core won't even attempt to turn it off. In theory on 6qp it is safe to turn PU off in suspend, however that is best accomplished with a new core flag. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-07-11soc: imx: gpc: Disable 6sl display power gating for ERR006287Leonard Crestez1-0/+10
The imx6sl chip errata document describes ERR006287 like this: > Upon resuming from power gating, the modules in the display power domain (eLCDIF, EPDC, PXP and SPDC) might fail to perform register reads correctly. > When the modules listed above are used, do not use power gating on the display power domain. Link: https://www.nxp.com/docs/en/errata/IMX6SLCE.pdf#page=62 Handle this in the safest possible way by keeping the DISP domain always-on. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-07-09driver core: Rename flag AUTOREMOVE to AUTOREMOVE_CONSUMERVivek Gautam1-1/+1
Now that we want to add another flag to autoremove the device link on supplier unbind, it's fair to rename the existing flag from DL_FLAG_AUTOREMOVE to DL_FLAG_AUTOREMOVE_CONSUMER so that we can add similar flag for supplier later. And, while we are touching device.h, fix a doc build warning. Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-06-17soc: imx: gpcv2: correct PGC offsetAnson Huang1-4/+9
Correct MIPI/PCIe/USB_HSIC's PGC offset based on design RTL, the values in the Reference Manual (Rev. 1, 01/2018 and the older ones) are incorrect. The correct offset values should be as below: 0x800 ~ 0x83F: PGC for core0 of A7 platform; 0x840 ~ 0x87F: PGC for core1 of A7 platform; 0x880 ~ 0x8BF: PGC for SCU of A7 platform; 0xA00 ~ 0xA3F: PGC for fastmix/megamix; 0xC00 ~ 0xC3F: PGC for MIPI PHY; 0xC40 ~ 0xC7F: PGC for PCIe_PHY; 0xC80 ~ 0xCBF: PGC for USB OTG1 PHY; 0xCC0 ~ 0xCFF: PGC for USB OTG2 PHY; 0xD00 ~ 0xD3F: PGC for USB HSIC PHY; Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Fixes: 03aa12629fc4 ("soc: imx: Add GPCv2 power gating driver") Acked-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-04-23soc: imx: gpc: Do not pass static memory as platform dataAndrey Smirnov1-5/+13
Platform device core assumes the ownership of dev.platform_data as well as that it is dynamically allocated and it will try to kfree it as a part of platform_device_release(). Change the code to use platform_device_add_data() instead of a pointer to a static memory to avoid causing a BUG() when calling platform_device_put(). The problem can be reproduced by artificially enabling the error path of platform_device_add() call (around line 452). Cc: Stefan Agner <stefan@agner.ch> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-04-23soc: imx: gpcv2: Do not pass static memory as platform dataAndrey Smirnov1-7/+15
Platform device core assumes the ownership of dev.platform_data as well as that it is dynamically allocated and it will try to kfree it as a part of platform_device_release(). Change the code to use platform_device_add_data() n instead of a pointer to a static memory to avoid causing a BUG() when calling platform_device_put(). The problem can be reproduced by artificially enabling the error path of platform_device_add() call (around line 357). Note that this change also allows us to constify imx7_pgc_domains, since we no longer need to be able to modify it. Cc: Stefan Agner <stefan@agner.ch> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-03-15Merge tag 'imx-drivers-4.17' of ↵Arnd Bergmann1-0/+1
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/drivers Pull "i.MX drivers update for 4.17" from Shawn Guo: - Set GENPD_FLAG_ALWAYS_ON flag for ARM power domain to avoid incorrect power state in sysfs pm_genpd_summary output. * tag 'imx-drivers-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: imx: gpc: ARM power domain should be always-on
2018-02-28Merge tag 'armsoc-fixes' of ↵Linus Torvalds1-1/+9
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: "This is the first set of bugfixes for ARM SoCs, fixing a couple of stability problems, mostly on TI OMAP and Rockchips platforms: - OMAP2 hwmod clocks must be enabled in the correct order - OMAP3 Wakeup from resume through PRM IRQ was unreliable - one regression on OMAP5 caused by a kexec fix - Rockchip ethernet needs some settings for stable operation on Rock64 - Rockchip based Chrombook Plus needs another clock setting for stable display suspend/resume - Rockchip based phyCORE-RK3288 was able to run at an invalid CPU clock frequency - Rockchip MMC link was sometimes unreliable - multiple fixes to avoid crashes in the Broadcom STB DPFE driver Other minor changes include: - Devicetree fixes for incorrect hardware description (rockchip, omap, Gemini, amlogic) - some MAINTAINER file updates to correct email and git addresses - some fixes addressing 'make W=1' dtc warnings (broadcom, amlogic, cavium, qualcomm, hisilicon, zx) - fixes for LTO-compilation (orion, davinci, clps711x) - one fix for an incorrect Kconfig errata selection - a memory leak in the OMAP timer driver - a kernel data leak in OMAP1 debugfs files" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits) MAINTAINERS: update entries for ARM/STM32 ARM: dts: bcm283x: Move arm-pmu out of soc node ARM: dts: bcm283x: Fix unit address of local_intc ARM: dts: NSP: Fix amount of RAM on BCM958625HR ARM: dts: Set D-Link DNS-313 SATA to muxmode 0 ARM: omap2: set CONFIG_LIRC=y in defconfig ARM: dts: imx6dl: Include correct dtsi file for Engicam i.CoreM6 DualLite/Solo RQS memory: brcmstb: dpfe: support new way of passing data from the DCPU memory: brcmstb: dpfe: fix type declaration of variable "ret" memory: brcmstb: dpfe: properly mask vendor error bits ARM: BCM: dts: Remove leading 0x and 0s from bindings notation ARM: orion: fix orion_ge00_switch_board_info initialization ARM: davinci: mark spi_board_info arrays as const ARM: clps711x: mark clps711x_compat as const arm: zx: dts: Remove leading 0x and 0s from bindings notation arm64: dts: Remove leading 0x and 0s from bindings notation arm64: dts: cavium: fix PCI bus dtc warnings MAINTAINERS: ARM: at91: update my email address soc: imx: gpc: de-register power domains only if initialized ARM: dts: rockchip: Fix DWMMC clocks ...
2018-02-22treewide/trivial: Remove ';;$' typo noiseIngo Molnar1-1/+1
On lkml suggestions were made to split up such trivial typo fixes into per subsystem patches: --- a/arch/x86/boot/compressed/eboot.c +++ b/arch/x86/boot/compressed/eboot.c @@ -439,7 +439,7 @@ setup_uga32(void **uga_handle, unsigned long size, u32 *width, u32 *height) struct efi_uga_draw_protocol *uga = NULL, *first_uga; efi_guid_t uga_proto = EFI_UGA_PROTOCOL_GUID; unsigned long nr_ugas; - u32 *handles = (u32 *)uga_handle;; + u32 *handles = (u32 *)uga_handle; efi_status_t status = EFI_INVALID_PARAMETER; int i; This patch is the result of the following script: $ sed -i 's/;;$/;/g' $(git grep -E ';;$' | grep "\.[ch]:" | grep -vwE 'for|ia64' | cut -d: -f1 | sort | uniq) ... followed by manual review to make sure it's all good. Splitting this up is just crazy talk, let's get over with this and just do it. Reported-by: Pavel Machek <pavel@ucw.cz> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-02-22soc: imx: gpc: de-register power domains only if initializedStefan Agner1-1/+9
If power domain information are missing in the device tree, no power domains get initialized. However, imx_gpc_remove tries to remove power domains always in the old DT binding case. Only remove power domains when imx_gpc_probe initialized them in first place. Fixes: 721cabf6c660 ("soc: imx: move PGC handling to a new GPC driver") Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-02-12soc: imx: gpc: ARM power domain should be always-onAnson Huang1-0/+1
ARM power domain does NOT support runtime off, always-on flag should be set to avoid incorrect power state in pm_genpd_summary: Before: root@imx6qpdlsolox:~# cat /sys/kernel/debug/pm_genpd/pm_genpd_summary domain status slaves /device runtime status ---------------------------------------------------------------------- ARM off-0 After: root@imx6qpdlsolox:~# cat /sys/kernel/debug/pm_genpd/pm_genpd_summary domain status slaves /device runtime status ---------------------------------------------------------------------- ARM on Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26soc: imx: gpc: Add i.MX6SX PCI power domainFabio Estevam1-1/+15
i.MX6SX has a PCI power domain in PGC. Add support for it. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-08-05soc: imx: gpcv2: fix regulator deferred probeStefan Agner1-7/+8
If a regulator requests a deferred probe, the power domain gets initialized twice. This leads to a list double add (without list debugging the kernel hangs due to the double add later): WARNING: CPU: 0 PID: 19 at lib/list_debug.c:31 __list_add_valid+0xbc/0xc4 list_add double add: new=c1229754, prev=c12383b4, next=c1229754. Initialize the power domain after we get the regulator. Also do not print an error in case the regulator defers probing. Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Fixes: 03aa12629fc4 ("soc: imx: Add GPCv2 power gating driver") Signed-off-by: Stefan Agner <stefan@agner.ch> Acked-by: Andrey Smirnov <andrew.smirnov@gmail.com> Tested-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-06-18Merge tag 'imx-drivers-4.13' of ↵Olof Johansson1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/drivers The i.MX drivers update for 4.13: - Add CONFIG_HAVE_IMX_GPC to control the build of GPC driver, so that it doesn't build for platforms that do not have it. * tag 'imx-drivers-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: imx: gpc: build gpc only if hardware has gpc Signed-off-by: Olof Johansson <olof@lixom.net>
2017-05-15soc: imx: gpc: build gpc only if hardware has gpcMarc Ohlf1-1/+1
Add CONFIG_HAVE_IMX_GPC to goal definition of gpc.o, to avoid building it for hardware that does not need it. Signed-off-by: Marc Ohlf <ohlf@mkt-sys.de> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-05-15soc: imx: add PM dependency for IMX7_PM_DOMAINSArnd Bergmann1-1/+2
The new pm domain driver causes a build failure when CONFIG_PM is not set: warning: (IMX7_PM_DOMAINS) selects PM_GENERIC_DOMAINS which has unmet direct dependencies (PM) drivers/base/power/domain_governor.c: In function 'default_suspend_ok': drivers/base/power/domain_governor.c:75:17: error: 'struct dev_pm_info' has no member named 'ignore_children' This adds a dependency to ensure that we don't attempt to build the driver without CONFIG_PM. Fixes: 03aa12629fc4 ("soc: imx: Add GPCv2 power gating driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-04-07soc: imx: gpc: add workaround for i.MX6QP to the GPC PD driverLucas Stach1-0/+20
On i.MX6QP, due to hardware erratum ERR009619, the PRE clocks may be stalled during the power up sequencing of the PU power domain. As this may lead to a complete loss of display output, the recommended workaround is to keep the PU domain enabled during normal system operation. Implement this by rejecting the domain power down request on the affected SoC. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-04-07soc: imx: gpc: add defines for domain indexLucas Stach1-4/+8
Makes referencing a specfic domain in the driver code less error prone. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-04-07soc: imx: Add GPCv2 power gating driverAndrey Smirnov3-0/+373
Add code allowing for control of various power domains managed by GPCv2 IP block found in i.MX7 series of SoCs. Power domains covered by this patch are: - PCIE PHY - MIPI PHY - USB HSIC PHY - USB OTG1/2 PHY Support for any other power domain controlled by GPC is not present, and can be added at some later point. Testing of this code was done against a PCIe driver. Cc: yurovsky@gmail.com Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Dong Aisheng <dongas86@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-03-24soc: imx: gpc: remove unnecessary readable_reg callbackDong Aisheng1-8/+0
It is not really necessary to provide the current .readable_reg implementation as we know what we're doing in our driver and the regmap core has already done the partial check for available maximum regs. Acked-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-03-24soc: imx: gpc: keep PGC_X_CTRL name align with reference manualDong Aisheng1-3/+3
Instead of GPC_PGC_PDN_OFFS, naming it as GPC_PGC_CTRL_OFFS which is defined in reference manual for better reading. Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-03-24soc: imx: gpc: fix comment when power up domainDong Aisheng1-1/+1
The correct comment should be power up domain. Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-03-24soc: imx: gpc: fix imx6sl gpc power domain regressionDong Aisheng1-11/+7
Commit 721cabf6c660 ("soc: imx: move PGC handling to a new GPC driver") broke the MX6SL GPC power domain support. It always got the following error: [ 1.248364] imx-gpc 20dc000.gpc: could not find pgc DT node This patch adds back the legecy support. Fixes: 721cabf6c660 ("soc: imx: move PGC handling to a new GPC driver") Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-03-24soc: imx: gpc: fix domain_index sanity check issueDong Aisheng1-1/+1
ARRAY_SIZE(imx_gpc_domains) represents all power domains supported by different SoCs. Driver should use SoC specific of_id_data->num_domains instead to do power domain index sanity check. e.g. MX6Q supports two power domains while MX6SL supports three. Fixes: 721cabf6c660 ("soc: imx: move PGC handling to a new GPC driver") Acked-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-03-24soc: imx: gpc: fix the wrong using of regmap cacheDong Aisheng1-10/+0
Without providing the proper reg_defaults, the regmap registers first read out may be always 0 if enabling cache, which results in the following issue we met. e.g. During driver probe in imx6_pm_domain_power_on(): regmap_read(pd->regmap, pd->reg_offs + GPC_PGC_PUPSCR_OFFS, &val); The PGC_PUPSCR register val is always 0 but it's actually 0xf01 in HW. Since GPC registers are tightly related to CPU bring up and may be changed in bootloader, we don't want to provide defaults. And the cache really does not save too much for GPC module. Therefore, simply disable cache to fix the issue and make life easy. Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Fixes: 721cabf6c660 ("soc: imx: move PGC handling to a new GPC driver") Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-03-24soc: imx: gpc: fix gpc clk get error handlingDong Aisheng1-1/+1
We got a following kernel crash once supplying one more IPG clock in GPC node in devicetree. The original error handling of clocks get is a bit wrong that when reaching the maximum clock get error, the index 'i' is already GPC_CLK_MAX which can't be used as the array index for clk_put operations. [ 3.000110] imx-gpc 20dc000.gpc: more than 6 clocks [ 3.005141] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 3.013487] pgd = c0004000 [ 3.016300] [00000000] *pgd=00000000 [ 3.020060] Internal error: Oops: 805 [#1] SMP ARM [ 3.024957] Modules linked in: [ 3.028122] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 4.11.0-rc1-00056-g813791b-dirty #1140 [ 3.037801] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [ 3.044435] task: ef298000 task.stack: ef294000 [ 3.049080] PC is at __clk_put+0x38/0xec [ 3.053103] LR is at 0x7f54ce9a [ 3.056345] pc : [<c0537984>] lr : [<7f54ce9a>] psr: 60000013 [ 3.056345] sp : ef295d48 ip : c8a582b2 fp : ef295d64 [ 3.068026] r10: ee9fc400 r9 : 00000000 r8 : ef398c10 [ 3.073354] r7 : ef398c10 r6 : c1071264 r5 : c10710f0 r4 : eea5be80 [ 3.079986] r3 : 00000000 r2 : 00000000 r1 : 00000100 r0 : 00000001 [ 3.086621] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 3.093863] Control: 10c5387d Table: 1000404a DAC: 00000051 [ 3.099712] Process swapper/0 (pid: 1, stack limit = 0xef294210) [ 3.105823] Stack: (0xef295d48 to 0xef296000) ... [ 3.292660] Backtrace: [ 3.295222] [<c053794c>] (__clk_put) from [<c0531028>] (clk_put+0x18/0x1c) [ 3.302206] r6:c1071264 r5:c10710f0 r4:c107124c r3:00000001 [ 3.307977] [<c0531010>] (clk_put) from [<c0546ba0>] (imx_pgc_get_clocks+0x64/0x78) [ 3.315747] [<c0546b3c>] (imx_pgc_get_clocks) from [<c0547124>] (imx_gpc_probe+0x204/0x31c) [ 3.324209] r7:00000000 r6:c1070eb0 r5:00000001 r4:ef398c00 [ 3.329980] [<c0546f20>] (imx_gpc_probe) from [<c05e65f0>] (platform_drv_probe+0x5c/0xc0) [ 3.338270] r10:c0f00608 r9:00000000 r8:00000000 r7:fffffdfb r6:c1070f20 r5:ef398c10 [ 3.346207] r4:ef398c10 [ 3.348849] [<c05e6594>] (platform_drv_probe) from [<c05e4250>] (driver_probe_device+0x214/0x2ec) [ 3.357835] r7:c1070f20 r6:00000000 r5:c18cea74 r4:ef398c10 [ 3.363607] [<c05e403c>] (driver_probe_device) from [<c05e43ec>] (__driver_attach+0xc4/0xc8) [ 3.372159] r9:c0f8b858 r8:c0f8b850 r7:00000000 r6:ef398c44 r5:c1070f20 r4:ef398c10 [ 3.380017] [<c05e4328>] (__driver_attach) from [<c05e21fc>] (bus_for_each_dev+0x7c/0xb0) [ 3.388304] r6:c05e4328 r5:c1070f20 r4:00000000 r3:00000000 [ 3.394074] [<c05e2180>] (bus_for_each_dev) from [<c05e3bc4>] (driver_attach+0x28/0x30) [ 3.402188] r6:c107f3e8 r5:eea5be00 r4:c1070f20 [ 3.406913] [<c05e3b9c>] (driver_attach) from [<c05e3740>] (bus_add_driver+0x19c/0x224) [ 3.415034] [<c05e35a4>] (bus_add_driver) from [<c05e52fc>] (driver_register+0x88/0x108) [ 3.423235] r7:c10e1000 r6:00000000 r5:c0f57d2c r4:c1070f20 [ 3.429004] [<c05e5274>] (driver_register) from [<c05e6534>] (__platform_driver_register+0x40/0x54) [ 3.438160] r5:c0f57d2c r4:00000006 [ 3.441846] [<c05e64f4>] (__platform_driver_register) from [<c0f57d44>] (imx_gpc_driver_init+0x18/0x20) [ 3.451360] [<c0f57d2c>] (imx_gpc_driver_init) from [<c010200c>] (do_one_initcall+0x4c/0x180) [ 3.460008] [<c0101fc0>] (do_one_initcall) from [<c0f00e40>] (kernel_init_freeable+0x130/0x1f8) [ 3.468820] r9:c0f8b858 r8:c0f8b850 r6:c0fc2414 r5:c10e1000 r4:00000006 [ 3.475637] [<c0f00d10>] (kernel_init_freeable) from [<c0ae6aec>] (kernel_init+0x18/0x124) [ 3.484014] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:c0ae6ad4 [ 3.491951] r4:00000000 [ 3.494590] [<c0ae6ad4>] (kernel_init) from [<c01088d0>] (ret_from_fork+0x14/0x24) [ 3.502267] r4:00000000 r3:ef294000 [ 3.505947] Code: e5943014 e5942018 e3530000 e3a01c01 (e5823000) [ 3.512215] ---[ end trace 375f9f2a5ddeff3c ]--- [ 3.517036] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Cc: Lucas Stach <l.stach@pengutronix.de> Fixes: 721cabf6c660 ("soc: imx: move PGC handling to a new GPC driver") Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-03-08soc: imx: move PGC handling to a new GPC driverLucas Stach2-0/+488
This is an almost complete re-write of the previous GPC power gating control code found in the IMX architecture code. It supports both the old and the new DT binding, allowing more domains to be added later and generally makes the driver easier to extend, while keeping compatibility with existing DTBs. As the result, all functionality regarding the power gating controller gets removed from the IMX architecture GPC driver. It keeps only the IRQ controller code in the architecture, as this is closely coupled to the CPU idle implementation. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-02 10:36:50 +0000