| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull networking fixes from David Miller:
1) Fix jmp to 1st instruction in x64 JIT, from Alexei Starovoitov.
2) Severl kTLS fixes in mlx5 driver, from Tariq Toukan.
3) Fix severe performance regression due to lack of SKB coalescing of
fragments during local delivery, from Guillaume Nault.
4) Error path memory leak in sch_taprio, from Ivan Khoronzhuk.
5) Fix batched events in skbedit packet action, from Roman Mashak.
6) Propagate VLAN TX offload to hw_enc_features in bond and team
drivers, from Yue Haibing.
7) RXRPC local endpoint refcounting fix and read after free in
rxrpc_queue_local(), from David Howells.
8) Fix endian bug in ibmveth multicast list handling, from Thomas
Falcon.
9) Oops, make nlmsg_parse() wrap around the correct function,
__nlmsg_parse not __nla_parse(). Fix from David Ahern.
10) Memleak in sctp_scend_reset_streams(), fro Zheng Bin.
11) Fix memory leak in cxgb4, from Wenwen Wang.
12) Yet another race in AF_PACKET, from Eric Dumazet.
13) Fix false detection of retransmit failures in tipc, from Tuong
Lien.
14) Use after free in ravb_tstamp_skb, from Tho Vu.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (101 commits)
ravb: Fix use-after-free ravb_tstamp_skb
netfilter: nf_tables: map basechain priority to hardware priority
net: sched: use major priority number as hardware priority
wimax/i2400m: fix a memory leak bug
net: cavium: fix driver name
ibmvnic: Unmap DMA address of TX descriptor buffers after use
bnxt_en: Fix to include flow direction in L2 key
bnxt_en: Use correct src_fid to determine direction of the flow
bnxt_en: Suppress HWRM errors for HWRM_NVM_GET_VARIABLE command
bnxt_en: Fix handling FRAG_ERR when NVM_INSTALL_UPDATE cmd fails
bnxt_en: Improve RX doorbell sequence.
bnxt_en: Fix VNIC clearing logic for 57500 chips.
net: kalmia: fix memory leaks
cx82310_eth: fix a memory leak bug
bnx2x: Fix VF's VLAN reconfiguration in reload.
Bluetooth: Add debug setting for changing minimum encryption key size
tipc: fix false detection of retransmit failures
lan78xx: Fix memory leaks
MAINTAINERS: r8169: Update path to the driver
MAINTAINERS: PHY LIBRARY: Update files in the record
...
|
|
Callbacks for a cmd reply run outside the protection of card->lock, to
allow for additional cmds to be issued & enqueued in parallel.
When qeth_send_control_data() bails out for a cmd without having
received a reply (eg. due to timeout), its callback may concurrently be
processing a reply that just arrived. In this case, the callback
potentially accesses a stale reply->reply_param area that eg. was
on-stack and has already been released.
To avoid this race, add some locking so that qeth_send_control_data()
can (1) wait for a concurrently running callback, and (2) zap any
pending callback that still wants to run.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull fall-through fixes from Gustavo A. R. Silva:
"Mark more switch cases where we are expecting to fall through, fixing
fall-through warnings in arm, sparc64, mips, i386 and s390"
* tag 'Wimplicit-fallthrough-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
ARM: ep93xx: Mark expected switch fall-through
scsi: fas216: Mark expected switch fall-throughs
pcmcia: db1xxx_ss: Mark expected switch fall-throughs
video: fbdev: omapfb_main: Mark expected switch fall-throughs
watchdog: riowd: Mark expected switch fall-through
s390/net: Mark expected switch fall-throughs
crypto: ux500/crypt: Mark expected switch fall-throughs
watchdog: wdt977: Mark expected switch fall-through
watchdog: scx200_wdt: Mark expected switch fall-through
watchdog: Mark expected switch fall-throughs
ARM: signal: Mark expected switch fall-through
mfd: omap-usb-host: Mark expected switch fall-throughs
mfd: db8500-prcmu: Mark expected switch fall-throughs
ARM: OMAP: dma: Mark expected switch fall-throughs
ARM: alignment: Mark expected switch fall-throughs
ARM: tegra: Mark expected switch fall-through
ARM/hw_breakpoint: Mark expected switch fall-throughs
|
|
Mark switch cases where we are expecting to fall through.
This patch fixes the following warnings (Building: s390):
drivers/s390/net/ctcm_fsms.c: In function ‘ctcmpc_chx_attnbusy’:
drivers/s390/net/ctcm_fsms.c:1703:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (grp->changed_side == 1) {
^
drivers/s390/net/ctcm_fsms.c:1707:2: note: here
case MPCG_STATE_XID0IOWAIX:
^~~~
drivers/s390/net/ctcm_mpc.c: In function ‘ctc_mpc_alloc_channel’:
drivers/s390/net/ctcm_mpc.c:358:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (callback)
^
drivers/s390/net/ctcm_mpc.c:360:2: note: here
case MPCG_STATE_XID0IOWAIT:
^~~~
drivers/s390/net/ctcm_mpc.c: In function ‘mpc_action_timeout’:
drivers/s390/net/ctcm_mpc.c:1469:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if ((fsm_getstate(rch->fsm) == CH_XID0_PENDING) &&
^
drivers/s390/net/ctcm_mpc.c:1472:2: note: here
default:
^~~~~~~
drivers/s390/net/ctcm_mpc.c: In function ‘mpc_send_qllc_discontact’:
drivers/s390/net/ctcm_mpc.c:2087:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (grp->estconnfunc) {
^
drivers/s390/net/ctcm_mpc.c:2092:2: note: here
case MPCG_STATE_FLOWC:
^~~~
drivers/s390/net/qeth_l2_main.c: In function ‘qeth_l2_process_inbound_buffer’:
drivers/s390/net/qeth_l2_main.c:328:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (IS_OSN(card)) {
^
drivers/s390/net/qeth_l2_main.c:337:3: note: here
default:
^~~~~~~
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Default configs updates
- Minor qdio cleanup
- Sparse warnings fixes
- Implicit-fallthrough warnings fixes
* tag 's390-5.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/zcrypt: adjust switch fall through comments for -Wimplicit-fallthrough
vfio-ccw: make vfio_ccw_async_region_ops static
s390/3215: add switch fall through comment for -Wimplicit-fallthrough
s390/tape: add fallthrough annotations
s390/mm: add fallthrough annotations
s390/mm: make gmap_test_and_clear_dirty_pmd static
s390/kexec: add missing include to machine_kexec_reloc.c
s390/perf: make cf_diag_csd static
s390/lib: add missing include
s390/boot: add missing declarations and includes
s390: update configs
s390: clean up qdio.h
|
|
Silence the following warnings when built with -Wimplicit-fallthrough=3
enabled by default since 5.3-rc2:
In file included from ./include/linux/preempt.h:11,
from ./include/linux/spinlock.h:51,
from ./include/linux/mmzone.h:8,
from ./include/linux/gfp.h:6,
from ./include/linux/slab.h:15,
from drivers/s390/crypto/ap_queue.c:13:
drivers/s390/crypto/ap_queue.c: In function 'ap_sm_recv':
./include/linux/list.h:577:2: warning: this statement may fall through [-Wimplicit-fallthrough=]
577 | for (pos = list_first_entry(head, typeof(*pos), member); \
| ^~~
drivers/s390/crypto/ap_queue.c:147:3: note: in expansion of macro 'list_for_each_entry'
147 | list_for_each_entry(ap_msg, &aq->pendingq, list) {
| ^~~~~~~~~~~~~~~~~~~
drivers/s390/crypto/ap_queue.c:155:2: note: here
155 | case AP_RESPONSE_NO_PENDING_REPLY:
| ^~~~
drivers/s390/crypto/zcrypt_msgtype6.c: In function 'convert_response_ep11_xcrb':
drivers/s390/crypto/zcrypt_msgtype6.c:871:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
871 | if (msg->cprbx.cprb_ver_id == 0x04)
| ^
drivers/s390/crypto/zcrypt_msgtype6.c:874:2: note: here
874 | default: /* Unknown response type, this should NEVER EVER happen */
| ^~~~~~~
drivers/s390/crypto/zcrypt_msgtype6.c: In function 'convert_response_rng':
drivers/s390/crypto/zcrypt_msgtype6.c:901:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
901 | if (msg->cprbx.cprb_ver_id == 0x02)
| ^
drivers/s390/crypto/zcrypt_msgtype6.c:907:2: note: here
907 | default: /* Unknown response type, this should NEVER EVER happen */
| ^~~~~~~
drivers/s390/crypto/zcrypt_msgtype6.c: In function 'convert_response_xcrb':
drivers/s390/crypto/zcrypt_msgtype6.c:838:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
838 | if (msg->cprbx.cprb_ver_id == 0x02)
| ^
drivers/s390/crypto/zcrypt_msgtype6.c:844:2: note: here
844 | default: /* Unknown response type, this should NEVER EVER happen */
| ^~~~~~~
drivers/s390/crypto/zcrypt_msgtype6.c: In function 'convert_response_ica':
drivers/s390/crypto/zcrypt_msgtype6.c:801:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
801 | if (msg->cprbx.cprb_ver_id == 0x02)
| ^
drivers/s390/crypto/zcrypt_msgtype6.c:808:2: note: here
808 | default: /* Unknown response type, this should NEVER EVER happen */
| ^~~~~~~
Acked-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
After getting a storage server event that causes the DASD device driver
to update its unit address configuration during a device shutdown there is
the possibility of an endless loop in the device driver.
In the system log there will be ongoing DASD error messages with RC: -19.
The reason is that the loop starting the ruac request only terminates when
the retry counter is decreased to 0. But in the sleep_on function there are
early exit paths that do not decrease the retry counter.
Prevent an endless loop by handling those cases separately.
Remove the unnecessary do..while loop since the sleep_on function takes
care of retries by itself.
Fixes: 8e09f21574ea ("[S390] dasd: add hyper PAV support to DASD device driver, part 1")
Cc: stable@vger.kernel.org # 2.6.25+
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Since vfio_ccw_async_region_ops is not exported and has no reason to be
globally visible make it static to avoid the following sparse warning:
drivers/s390/cio/vfio_ccw_async.c:73:30: warning: symbol 'vfio_ccw_async_region_ops' was not declared. Should it be static?
Fixes: d5afd5d135c8 ("vfio-ccw: add handling for async channel instructions")
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Silence the following warning when built with -Wimplicit-fallthrough=3
enabled by default since 5.3-rc2:
drivers/s390/char/con3215.c: In function 'raw3215_irq':
drivers/s390/char/con3215.c:399:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
399 | if (dstat == 0x08)
| ^
drivers/s390/char/con3215.c:401:2: note: here
401 | case 0x04:
| ^~~~
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Commit a035d552a93b ("Makefile: Globally enable fall-through warning")
enables fall-through warnings globally. Add missing annotations.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
The access to airq_areas was racy ever since the adapter interrupts got
introduced to virtio-ccw, but since commit 39c7dcb15892 ("virtio/s390:
make airq summary indicators DMA") this became an issue in practice as
well. Namely before that commit the airq_info that got overwritten was
still functional. After that commit however the two infos share a
summary_indicator, which aggravates the situation. Which means
auto-online mechanism occasionally hangs the boot with virtio_blk.
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 96b14536d935 ("virtio-ccw: virtio-ccw adapter interrupt support.")
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/vfio-ccw into fixes
Fixes in vfio-ccw for older and newer issues.
|
|
The IQD mcast queue doesn't support QAOB mode, so skip the
qdio_enable_async_operation() setup call for this queue. This avoids
the allocation of an unneeded QAOB pointer array, and sets up q->use_cq
properly so that drivers are prohibited from using QAOBs for mcast
traffic.
Take this opportunity to streamline the q->use_cq and aob != 0 checks.
The path to qdio_siga_output() is straight-forward, we don't need to
worry about being called with bad operands.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
If the device driver were to send out a full queue's worth of SBALs,
current code would end up discovering the last of those SBALs as PRIMED
and erroneously skip the SIGA-w. This immediately stalls the queue.
Add a check to not attempt fast-requeue in this case. While at it also
make sure that the state of the previous SBAL was successfully extracted
before inspecting it.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is the final round of mostly small fixes in our initial submit.
It's mostly minor fixes and driver updates. The only change of note is
adding a virt_boundary_mask to the SCSI host and host template to
parametrise this for NVMe devices instead of having them do a call in
slave_alloc. It's a fairly straightforward conversion except in the
two NVMe handling drivers that didn't set it who now have a virtual
infinity parameter added"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (24 commits)
scsi: megaraid_sas: set an unlimited max_segment_size
scsi: mpt3sas: set an unlimited max_segment_size for SAS 3.0 HBAs
scsi: IB/srp: set virt_boundary_mask in the scsi host
scsi: IB/iser: set virt_boundary_mask in the scsi host
scsi: storvsc: set virt_boundary_mask in the scsi host template
scsi: ufshcd: set max_segment_size in the scsi host template
scsi: core: take the DMA max mapping size into account
scsi: core: add a host / host template field for the virt boundary
scsi: core: Fix race on creating sense cache
scsi: sd_zbc: Fix compilation warning
scsi: libfc: fix null pointer dereference on a null lport
scsi: zfcp: fix GCC compiler warning emitted with -Wmaybe-uninitialized
scsi: zfcp: fix request object use-after-free in send path causing wrong traces
scsi: zfcp: fix request object use-after-free in send path causing seqno errors
scsi: megaraid_sas: Update driver version to 07.710.50.00
scsi: megaraid_sas: Add module parameter for FW Async event logging
scsi: megaraid_sas: Enable msix_load_balance for Invader and later controllers
scsi: megaraid_sas: Fix calculation of target ID
scsi: lpfc: reduce stack size with CONFIG_GCC_PLUGIN_STRUCTLEAK_VERBOSE
scsi: devinfo: BLIST_TRY_VPD_PAGES for SanDisk Cruzer Blade
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"Primarily just the virtio_pmem driver:
- virtio_pmem
The new virtio_pmem facility introduces a paravirtualized
persistent memory device that allows a guest VM to use DAX
mechanisms to access a host-file with host-page-cache. It arranges
for MAP_SYNC to be disabled and instead triggers a host fsync()
when a 'write-cache flush' command is sent to the virtual disk
device.
- Miscellaneous small fixups"
* tag 'libnvdimm-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
virtio_pmem: fix sparse warning
xfs: disable map_sync for async flush
ext4: disable map_sync for async flush
dax: check synchronous mapping is supported
dm: enable synchronous dax
libnvdimm: add dax_dev sync flag
virtio-pmem: Add virtio pmem driver
libnvdimm: nd_region flush callback support
libnvdimm, namespace: Drop uuid_t implementation detail
|
|
There is a small window where it's possible that we could be working
on an interrupt (queued in the workqueue) and setting up a channel
program (i.e allocating memory, pinning pages, translating address).
This can lead to allocating and freeing the channel program at the
same time and can cause memory corruption.
Let's not call cp_free if we are currently processing a channel program.
The only way we know for sure that we don't have a thread setting
up a channel program is when the state is set to VFIO_CCW_STATE_CP_PENDING.
Fixes: d5afd5d135c8 ("vfio-ccw: add handling for async channel instructions")
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <62e87bf67b38dc8d5760586e7c96d400db854ebe.1562854091.git.alifm@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
So we don't call try to call vfio_unpin_pages() incorrectly.
Fixes: 0a19e61e6d4c ("vfio: ccw: introduce channel program interfaces")
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <33a89467ad6369196ae6edf820cbcb1e2d8d050c.1562854091.git.alifm@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
We don't set cp->initialized to true so calling cp_free
will just return and not do anything.
Also fix a memory leak where we fail to free a ccwchain
on an error.
Fixes: 812271b910 ("s390/cio: Squash cp_free() and cp_unpin_free()")
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Message-Id: <3173c4216f4555d9765eb6e4922534982bc820e4.1562854091.git.alifm@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
The comment is misleading because it tells us that
we should set orb.cmd.c64 before calling ccwchain_calc_length,
otherwise the function ccwchain_calc_length would return an
error. This is not completely accurate.
We want to allow an orb without cmd.c64, and this is fine
as long as the channel program does not use IDALs. But we do
want to reject any channel program that uses IDALs and does
not set the flag, which is what we do in ccwchain_calc_length.
After we have done the ccw processing, we need to set cmd.c64,
as we use IDALs for all translated channel programs.
Also for better code readability let's move the setting of
cmd.c64 within the non error path.
Fixes: fb9e7880af35 ("vfio: ccw: push down unsupported IDA check")
Signed-off-by: Farhan Ali <alifm@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <f68636106aef0faeb6ce9712584d102d1b315ff8.1562854091.git.alifm@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Vasily Gorbik:
- Fix integer overflow during stack frame unwind with invalid
backchain.
- Cleanup unused symbol export in zcrypt code.
- Fix MIO addressing control activation in PCI code and expose its
usage via sysfs.
- Fix kernel image signature verification report presence detection.
- Fix irq registration in vfio-ap code.
- Add CPU measurement counters for newer machines.
- Add base DASD thin provisioning support and code cleanups.
* tag 's390-5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (21 commits)
s390/unwind: avoid int overflow in outside_of_stack
s390/zcrypt: remove the exporting of ap_query_configuration
s390/pci: add mio_enabled attribute
s390: fix setting of mio addressing control
s390/ipl: Fix detection of has_secure attribute
s390: vfio-ap: fix irq registration
s390/cpumf: Add extended counter set definitions for model 8561 and 8562
s390/dasd: Handle out-of-space constraint
s390/dasd: Add discard support for ESE volumes
s390/dasd: Use ALIGN_DOWN macro
s390/dasd: Make dasd_setup_queue() a discipline function
s390/dasd: Add new ioctl to release space
s390/dasd: Add dasd_sleep_on_queue_interruptible()
s390/dasd: Add missing intensity definition
s390/dasd: Fix whitespace
s390/dasd: Add dynamic formatting support for ESE volumes
s390/dasd: Recognise data for ESE volumes
s390/dasd: Put sub-order definitions in a separate section
s390/dasd: Make layout analysis ESE compatible
s390/dasd: Remove old defines and function
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core and debugfs updates from Greg KH:
"Here is the "big" driver core and debugfs changes for 5.3-rc1
It's a lot of different patches, all across the tree due to some api
changes and lots of debugfs cleanups.
Other than the debugfs cleanups, in this set of changes we have:
- bus iteration function cleanups
- scripts/get_abi.pl tool to display and parse Documentation/ABI
entries in a simple way
- cleanups to Documenatation/ABI/ entries to make them parse easier
due to typos and other minor things
- default_attrs use for some ktype users
- driver model documentation file conversions to .rst
- compressed firmware file loading
- deferred probe fixes
All of these have been in linux-next for a while, with a bunch of
merge issues that Stephen has been patient with me for"
* tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (102 commits)
debugfs: make error message a bit more verbose
orangefs: fix build warning from debugfs cleanup patch
ubifs: fix build warning after debugfs cleanup patch
driver: core: Allow subsystems to continue deferring probe
drivers: base: cacheinfo: Ensure cpu hotplug work is done before Intel RDT
arch_topology: Remove error messages on out-of-memory conditions
lib: notifier-error-inject: no need to check return value of debugfs_create functions
swiotlb: no need to check return value of debugfs_create functions
ceph: no need to check return value of debugfs_create functions
sunrpc: no need to check return value of debugfs_create functions
ubifs: no need to check return value of debugfs_create functions
orangefs: no need to check return value of debugfs_create functions
nfsd: no need to check return value of debugfs_create functions
lib: 842: no need to check return value of debugfs_create functions
debugfs: provide pr_fmt() macro
debugfs: log errors when something goes wrong
drivers: s390/cio: Fix compilation warning about const qualifiers
drivers: Add generic helper to match by of_node
driver_find_device: Unify the match function with class_find_device()
bus_find_device: Unify the match callback with class_find_device
...
|
|
GCC v9 emits this warning:
CC drivers/s390/scsi/zfcp_erp.o
drivers/s390/scsi/zfcp_erp.c: In function 'zfcp_erp_action_enqueue':
drivers/s390/scsi/zfcp_erp.c:217:26: warning: 'erp_action' may be used uninitialized in this function [-Wmaybe-uninitialized]
217 | struct zfcp_erp_action *erp_action;
| ^~~~~~~~~~
This is a possible false positive case, as also documented in the GCC
documentations:
https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wmaybe-uninitialized
The actual code-sequence is like this:
Various callers can invoke the function below with the argument "want"
being one of:
ZFCP_ERP_ACTION_REOPEN_ADAPTER,
ZFCP_ERP_ACTION_REOPEN_PORT_FORCED,
ZFCP_ERP_ACTION_REOPEN_PORT, or
ZFCP_ERP_ACTION_REOPEN_LUN.
zfcp_erp_action_enqueue(want, ...)
...
need = zfcp_erp_required_act(want, ...)
need = want
...
maybe: need = ZFCP_ERP_ACTION_REOPEN_PORT
maybe: need = ZFCP_ERP_ACTION_REOPEN_ADAPTER
...
return need
...
zfcp_erp_setup_act(need, ...)
struct zfcp_erp_action *erp_action; // <== line 217
...
switch(need) {
case ZFCP_ERP_ACTION_REOPEN_LUN:
...
erp_action = &zfcp_sdev->erp_action;
WARN_ON_ONCE(erp_action->port != port); // <== access
...
break;
case ZFCP_ERP_ACTION_REOPEN_PORT:
case ZFCP_ERP_ACTION_REOPEN_PORT_FORCED:
...
erp_action = &port->erp_action;
WARN_ON_ONCE(erp_action->port != port); // <== access
...
break;
case ZFCP_ERP_ACTION_REOPEN_ADAPTER:
...
erp_action = &adapter->erp_action;
WARN_ON_ONCE(erp_action->port != NULL); // <== access
...
break;
}
...
WARN_ON_ONCE(erp_action->adapter != adapter); // <== access
When zfcp_erp_setup_act() is called, 'need' will never be anything else
than one of the 4 possible enumeration-names that are used in the
switch-case, and 'erp_action' is initialized for every one of them, before
it is used. Thus the warning is a false positive, as documented.
We introduce the extra if{} in the beginning to create an extra code-flow,
so the compiler can be convinced that the switch-case will never see any
other value.
BUG_ON()/BUG() is intentionally not used to not crash anything, should
this ever happen anyway - right now it's impossible, as argued above; and
it doesn't introduce a 'default:' switch-case to retain warnings should
'enum zfcp_erp_act_type' ever be extended and no explicit case be
introduced. See also v5.0 commit 399b6c8bc9f7 ("scsi: zfcp: drop old
default switch case which might paper over missing case").
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When tracing instances where we open and close WKA ports, we also pass the
request-ID of the respective FSF command.
But after successfully sending the FSF command we must not use the
request-object anymore, as this might result in an use-after-free (see
"zfcp: fix request object use-after-free in send path causing seqno
errors" ).
To fix this add a new variable that caches the request-ID before sending
the request. This won't change during the hand-off to the FCP channel,
and so it's safe to trace this cached request-ID later, instead of using
the request object.
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Fixes: d27a7cb91960 ("zfcp: trace on request for open and close of WKA port")
Cc: <stable@vger.kernel.org> #2.6.38+
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
With a recent change to our send path for FSF commands we introduced a
possible use-after-free of request-objects, that might further lead to
zfcp crafting bad requests, which the FCP channel correctly complains
about with an error (FSF_PROT_SEQ_NUMB_ERROR). This error is then handled
by an adapter-wide recovery.
The following sequence illustrates the possible use-after-free:
Send Path:
int zfcp_fsf_open_port(struct zfcp_erp_action *erp_action)
{
struct zfcp_fsf_req *req;
...
spin_lock_irq(&qdio->req_q_lock);
// ^^^^^^^^^^^^^^^^
// protects QDIO queue during sending
...
req = zfcp_fsf_req_create(qdio,
FSF_QTCB_OPEN_PORT_WITH_DID,
SBAL_SFLAGS0_TYPE_READ,
qdio->adapter->pool.erp_req);
// ^^^^^^^^^^^^^^^^^^^
// allocation of the request-object
...
retval = zfcp_fsf_req_send(req);
...
spin_unlock_irq(&qdio->req_q_lock);
return retval;
}
static int zfcp_fsf_req_send(struct zfcp_fsf_req *req)
{
struct zfcp_adapter *adapter = req->adapter;
struct zfcp_qdio *qdio = adapter->qdio;
...
zfcp_reqlist_add(adapter->req_list, req);
// ^^^^^^^^^^^^^^^^
// add request to our driver-internal hash-table for tracking
// (protected by separate lock req_list->lock)
...
if (zfcp_qdio_send(qdio, &req->qdio_req)) {
// ^^^^^^^^^^^^^^
// hand-off the request to FCP channel;
// the request can complete at any point now
...
}
/* Don't increase for unsolicited status */
if (!zfcp_fsf_req_is_status_read_buffer(req))
// ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
// possible use-after-free
adapter->fsf_req_seq_no++;
// ^^^^^^^^^^^^^^^^
// because of the use-after-free we might
// miss this accounting, and as follow-up
// this results in the FCP channel error
// FSF_PROT_SEQ_NUMB_ERROR
adapter->req_no++;
return 0;
}
static inline bool
zfcp_fsf_req_is_status_read_buffer(struct zfcp_fsf_req *req)
{
return req->qtcb == NULL;
// ^^^^^^^^^
// possible use-after-free
}
Response Path:
void zfcp_fsf_reqid_check(struct zfcp_qdio *qdio, int sbal_idx)
{
...
struct zfcp_fsf_req *fsf_req;
...
for (idx = 0; idx < QDIO_MAX_ELEMENTS_PER_BUFFER; idx++) {
...
fsf_req = zfcp_reqlist_find_rm(adapter->req_list,
req_id);
// ^^^^^^^^^^^^^^^^^^^^
// remove request from our driver-internal
// hash-table (lock req_list->lock)
...
zfcp_fsf_req_complete(fsf_req);
}
}
static void zfcp_fsf_req_complete(struct zfcp_fsf_req *req)
{
...
if (likely(req->status & ZFCP_STATUS_FSFREQ_CLEANUP))
zfcp_fsf_req_free(req);
// ^^^^^^^^^^^^^^^^^
// free memory for request-object
else
complete(&req->completion);
// ^^^^^^^^
// completion notification for code-paths that wait
// synchronous for the completion of the request; in
// those the memory is freed separately
}
The result of the use-after-free only affects the send path, and can not
lead to any data corruption. In case we miss the sequence-number
accounting, because the memory was already re-purposed, the next FSF
command will fail with said FCP channel error, and we will recover the
whole adapter. This causes no additional errors, but it slows down
traffic. There is a slight chance of the same thing happen again
recursively after the adapter recovery, but so far this has not been seen.
This was seen under z/VM, where the send path might run on a virtual CPU
that gets scheduled away by z/VM, while the return path might still run,
and so create the necessary timing. Running with KASAN can also slow down
the kernel sufficiently to run into this user-after-free, and then see the
report by KASAN.
To fix this, simply pull the test for the sequence-number accounting in
front of the hand-off to the FCP channel (this information doesn't change
during hand-off), but leave the sequence-number accounting itself where it
is.
To make future regressions of the same kind less likely, add comments to
all closely related code-paths.
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Fixes: f9eca0227600 ("scsi: zfcp: drop duplicate fsf_command from zfcp_fsf_req which is also in QTCB header")
Cc: <stable@vger.kernel.org> #5.0+
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull SCSI scatter-gather list updates from James Bottomley:
"This topic branch covers a fundamental change in how our sg lists are
allocated to make mq more efficient by reducing the size of the
preallocated sg list.
This necessitates a large number of driver changes because the
previous guarantee that if a driver specified SG_ALL as the size of
its scatter list, it would get a non-chained list and didn't need to
bother with scatterlist iterators is now broken and every driver
*must* use scatterlist iterators.
This was broken out as a separate topic because we need to convert all
the drivers before pulling the trigger and unconverted drivers kept
being found, necessitating a rebase"
* tag 'scsi-sg' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (21 commits)
scsi: core: don't preallocate small SGL in case of NO_SG_CHAIN
scsi: lib/sg_pool.c: clear 'first_chunk' in case of no preallocation
scsi: core: avoid preallocating big SGL for data
scsi: core: avoid preallocating big SGL for protection information
scsi: lib/sg_pool.c: improve APIs for allocating sg pool
scsi: esp: use sg helper to iterate over scatterlist
scsi: NCR5380: use sg helper to iterate over scatterlist
scsi: wd33c93: use sg helper to iterate over scatterlist
scsi: ppa: use sg helper to iterate over scatterlist
scsi: pcmcia: nsp_cs: use sg helper to iterate over scatterlist
scsi: imm: use sg helper to iterate over scatterlist
scsi: aha152x: use sg helper to iterate over scatterlist
scsi: s390: zfcp_fc: use sg helper to iterate over scatterlist
scsi: staging: unisys: visorhba: use sg helper to iterate over scatterlist
scsi: usb: image: microtek: use sg helper to iterate over scatterlist
scsi: pmcraid: use sg helper to iterate over scatterlist
scsi: ipr: use sg helper to iterate over scatterlist
scsi: mvumi: use sg helper to iterate over scatterlist
scsi: lpfc: use sg helper to iterate over scatterlist
scsi: advansys: use sg helper to iterate over scatterlist
...
|
|
The function ap_query_configuration is declared static and marked
EXPORT_SYMBOL, which is at best an odd combination. Because the
function is not used outside of the drivers/s390/crypto/ap_bus.c
file it is defined in, this commit removes the EXPORT_SYMBOL() marking.
Link: http://lkml.kernel.org/r/20190709122507.11158-1-efremov@linux.com
Fixes: f1b0a4343c41 ("s390/zcrypt: Integrate ap_asm.h into include/asm/ap.h.")
Fixes: 050349b5b71d ("s390/zcrypt: externalize AP config info query")
Signed-off-by: Denis Efremov <efremov@linux.com>
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Use the correct bit for detection of the machine capability associated
with the has_secure attribute. It is expected that the underlying
platform (including hypervisors) unsets the bit when they don't provide
secure ipl for their guests.
Fixes: c9896acc7851 ("s390/ipl: Provide has_secure sysfs attribute")
Cc: stable@vger.kernel.org # 5.2
Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
vfio_ap_free_aqic_resources is called in two places:
- during registration to have a "known state"
- during interrupt disable
We must not clear q->matrix_mdev in the registration phase as this will
mess up the reference counting and can lead to some warning and other
bugs.
Fixes: ec89b55e3bce ("s390: ap: implement PAPQ AQIC interception in kernel")
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
The storage server issues three different types of out-of-space messages
whenever the Extent Pool or Extent Repository space runs short. When a
configured warning watermark is reached, the physical space is
completeley exhausted, or the capacity constraints have been relieved, a
message is received.
A log entry for the sysadmin to react to is generated in any case. In
case the physical space is completely exhausted, sense data that reads
"no space left on device" is received. In this case, currently running
I/O will be blocked until space has either been released or added to the
extent pool, and a relieve message was received via an attention
interrupt.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
ESE (Extent Space Efficient) volumes are thin-provisioned and therefore
space is only occupied with real data. In order to make previously used
space available for re-allocation again, discard support is enabled for
ESE volumes allowing the DASD driver to release said space.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
There is now an ALIGN_DOWN macro available. Let's rather use kernel
provided macros that do the things we want.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
ECKD, FBA, and the DIAG discipline use slightly different block layer
settings. In preparation of even more diverse queue settings, make
dasd_setup_queue() a discipline function.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Userspace tools might have the need to release space for Extent Space
Efficient (ESE) volumes when working with such a device.
Provide the necessarry interface for such a task by implementing a new
ioctl BIODASDRAS. The ioctl uses the format_data_t data structure for
data input:
typedef struct format_data_t {
unsigned int start_unit; /* from track */
unsigned int stop_unit; /* to track */
unsigned int blksize; /* sectorsize */
unsigned int intensity;
} format_data_t;
If the intensity is set to 0x40, start_unit and stop_unit are ignored
and space for the entire volume is released. Otherwise, if intensity is
set to 0, the respective range is released (if possible).
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
There is dasd_sleep_on() and dasd_sleep_on_interruptible() to start CCW
requests uninterruptible and interruptible. However, there is only
dasd_sleep_on_queue() to start requests from CCW queues uninterruptible.
Add dasd_sleep_on_queue_interruptible() to provide a way to start
requests from CCW queues interruptible. _dasd_sleep_on_queue() already
provides this functionality.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
A dynamic formatting is issued whenever a write request returns with
either a No Record Found error (Command Mode), Incorrect Length error
(Transport Mode), or File Protected error (Transport Mode). All three
cases mean that the tracks in question haven't been initialized in a
desired format yet.
The part of the volume that was tried to be written on is then formatted
and the original request is re-queued.
As the formatting will happen during normal I/O operations, it is quite
likely that there won't be any memory available to build the respective
request. Another two pages of memory are allocated per volume
specifically for the dynamic formatting.
The dasd_eckd_build_format() function is extended to make sure that the
original startdev is reused. Also, all formatting and format check
functions use the new memory pool exclusively now to reduce complexity.
Read operations will always return zero data when unformatted areas are
read.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
In order to work with Extent Space Efficient (ESE) volumes, certain
viable information about those volumes and the corresponding extent
pool (such as extent size, configured space, allocated space, etc.) can
be provided.
Use the CCW commands Volume Storage Query and Logical Configuration
Query to receive detailed information about ESE volumes and the extent
pool respectively. These information are made accessible via internal
functions for subsequent users, and via sysfs attributes for userpsace
usage.
The new sysfs attributes reside in separate directories called capacity
and extent_pool.
attributes:
ese:
0/1 depending on whether the volume is an ESE volume
Capacity related attributes:
space_allocated:
Space currently allocated by the volume (in cyl)
space_configured:
Remaining space in the extent pool (in cyl)
logical_capacity:
The entire addressable space for this volume (in cyl)
Extent Pool related attributes:
pool_id:
ID of the extent pool the volume in question resides in
pool_oos:
Extent pool is out-of-space
extent_size:
Size of a single extent in this pool
cap_at_warnlevel
Extent pool capacity at warn level
warn_threshold:
Threshold at which percentage of remaining extent pool space a
warning message is issued
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
There are orders and sub-orders. Put them in different sections for a
better overview.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
The disk layout and volume information of a DASD reside in the first two
tracks of cylinder 0. When a DASD is set online, currently the first
three tracks are read and analysed to confirm an expected layout.
For CDL (Compatible Disk Layout) only count area data of the first track
is evaluated and checked against expected key and data lengths. For LDL
(Linux Disk Layout) the first and third track is evaluated. However,
an LDL formatted volume is expected to be in the same format across all
tracks. Checking the third track therefore doesn't have any more value
than checking any other track at random.
Now, an Extent Space Efficient (ESE) DASD is initialised by only
formatting the first two tracks, as those tracks always contain all
information necessarry.
Checking the third track on an ESE volume will therefore most likely
fail with a record not found error, as the third track will be empty.
This in turn leads to the device being recognised with a volume size of
0. Attempts to write volume information on the first two tracks then
fail with "no space left on device" errors.
Initialising the first three tracks for an ESE volume is not a viable
solution, because the third track is already a regular track and could
contain user data. With that there is potential for data corruption.
Instead, always only analyse the first two tracks, as it is sufficiant
for both CDL and LDL, and allow ESE volumes to be recognised as well.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Commit 4d284cac76d0 ("[S390] Avoid excessive inlining.") removed
bytes_per_record() which was the only user of the defines ECKD_C0 and
ECKD_F*, and round_up_multiple(). Let's get rid of those.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
There are structs that have never been used. There are also two function
prototypes which were forgotton in commit f9f8d02fae0d ("[S390] dasd:
revert LCU optimization").
Clean up and keep the header file tidy.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Pull networking updates from David Miller:
"Some highlights from this development cycle:
1) Big refactoring of ipv6 route and neigh handling to support
nexthop objects configurable as units from userspace. From David
Ahern.
2) Convert explored_states in BPF verifier into a hash table,
significantly decreased state held for programs with bpf2bpf
calls, from Alexei Starovoitov.
3) Implement bpf_send_signal() helper, from Yonghong Song.
4) Various classifier enhancements to mvpp2 driver, from Maxime
Chevallier.
5) Add aRFS support to hns3 driver, from Jian Shen.
6) Fix use after free in inet frags by allocating fqdirs dynamically
and reworking how rhashtable dismantle occurs, from Eric Dumazet.
7) Add act_ctinfo packet classifier action, from Kevin
Darbyshire-Bryant.
8) Add TFO key backup infrastructure, from Jason Baron.
9) Remove several old and unused ISDN drivers, from Arnd Bergmann.
10) Add devlink notifications for flash update status to mlxsw driver,
from Jiri Pirko.
11) Lots of kTLS offload infrastructure fixes, from Jakub Kicinski.
12) Add support for mv88e6250 DSA chips, from Rasmus Villemoes.
13) Various enhancements to ipv6 flow label handling, from Eric
Dumazet and Willem de Bruijn.
14) Support TLS offload in nfp driver, from Jakub Kicinski, Dirk van
der Merwe, and others.
15) Various improvements to axienet driver including converting it to
phylink, from Robert Hancock.
16) Add PTP support to sja1105 DSA driver, from Vladimir Oltean.
17) Add mqprio qdisc offload support to dpaa2-eth, from Ioana
Radulescu.
18) Add devlink health reporting to mlx5, from Moshe Shemesh.
19) Convert stmmac over to phylink, from Jose Abreu.
20) Add PTP PHC (Physical Hardware Clock) support to mlxsw, from
Shalom Toledo.
21) Add nftables SYNPROXY support, from Fernando Fernandez Mancera.
22) Convert tcp_fastopen over to use SipHash, from Ard Biesheuvel.
23) Track spill/fill of constants in BPF verifier, from Alexei
Starovoitov.
24) Support bounded loops in BPF, from Alexei Starovoitov.
25) Various page_pool API fixes and improvements, from Jesper Dangaard
Brouer.
26) Just like ipv4, support ref-countless ipv6 route handling. From
Wei Wang.
27) Support VLAN offloading in aquantia driver, from Igor Russkikh.
28) Add AF_XDP zero-copy support to mlx5, from Maxim Mikityanskiy.
29) Add flower GRE encap/decap support to nfp driver, from Pieter
Jansen van Vuuren.
30) Protect against stack overflow when using act_mirred, from John
Hurley.
31) Allow devmap map lookups from eBPF, from Toke Høiland-Jørgensen.
32) Use page_pool API in netsec driver, Ilias Apalodimas.
33) Add Google gve network driver, from Catherine Sullivan.
34) More indirect call avoidance, from Paolo Abeni.
35) Add kTLS TX HW offload support to mlx5, from Tariq Toukan.
36) Add XDP_REDIRECT support to bnxt_en, from Andy Gospodarek.
37) Add MPLS manipulation actions to TC, from John Hurley.
38) Add sending a packet to connection tracking from TC actions, and
then allow flower classifier matching on conntrack state. From
Paul Blakey.
39) Netfilter hw offload support, from Pablo Neira Ayuso"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2080 commits)
net/mlx5e: Return in default case statement in tx_post_resync_params
mlx5: Return -EINVAL when WARN_ON_ONCE triggers in mlx5e_tls_resync().
net: dsa: add support for BRIDGE_MROUTER attribute
pkt_sched: Include const.h
net: netsec: remove static declaration for netsec_set_tx_de()
net: netsec: remove superfluous if statement
netfilter: nf_tables: add hardware offload support
net: flow_offload: rename tc_cls_flower_offload to flow_cls_offload
net: flow_offload: add flow_block_cb_is_busy() and use it
net: sched: remove tcf block API
drivers: net: use flow block API
net: sched: use flow block API
net: flow_offload: add flow_block_cb_{priv, incref, decref}()
net: flow_offload: add list handling functions
net: flow_offload: add flow_block_cb_alloc() and flow_block_cb_free()
net: flow_offload: rename TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_*
net: flow_offload: rename TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BIND
net: flow_offload: add flow_block_cb_setup_simple()
net: hisilicon: Add an tx_desc to adapt HI13X1_GMAC
net: hisilicon: Add an rx_desc to adapt HI13X1_GMAC
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Improve stop_machine wait logic: replace cpu_relax_yield call in
generic stop_machine function with a weak stop_machine_yield
function. This is overridden on s390, which yields the current cpu to
the neighbouring cpu after a couple of retries, instead of blindly
giving up the cpu to the hipervisor. This significantly improves
stop_machine performance on s390 in overcommitted scenarios.
This includes common code changes which have been Acked by Peter
Zijlstra and Thomas Gleixner.
- Improve jump label transformation speed: transform jump labels
without using stop_machine.
- Refactoring of the vfio-ccw cp handling, simplifying the code and
avoiding unneeded allocating/copying.
- Various vfio-ccw fixes (ccw translation, state machine).
- Add support for vfio-ap queue interrupt control in the guest. This
includes s390 kvm changes which have been Acked by Christian
Borntraeger.
- Add protected virtualization support for virtio-ccw.
- Enforce both CONFIG_SMP and CONFIG_HOTPLUG_CPU, which allows to
remove some code which most likely isn't working at all, besides that
s390 didn't even compile for !CONFIG_SMP.
- Support for special flagged EP11 CPRBs for zcrypt.
- Handle PCI devices with no support for new MIO instructions.
- Avoid KASAN false positives in reworked stack unwinder.
- Couple of fixes for the QDIO layer.
- Convert s390 specific documentation to ReST format.
- Let s390 crypto modules return -ENODEV instead of -EOPNOTSUPP if
hardware is missing. This way our modules behave like most other
modules and which is also what systemd's systemd-modules-load.service
expects.
- Replace defconfig with performance_defconfig, so there is one config
file less to maintain.
- Remove the SCLP call home device driver, which was never useful.
- Cleanups all over the place.
* tag 's390-5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (83 commits)
docs: s390: s390dbf: typos and formatting, update crash command
docs: s390: unify and update s390dbf kdocs at debug.c
docs: s390: restore important non-kdoc parts of s390dbf.rst
vfio-ccw: Fix the conversion of Format-0 CCWs to Format-1
s390/pci: correctly handle MIO opt-out
s390/pci: deal with devices that have no support for MIO instructions
s390: ap: kvm: Enable PQAP/AQIC facility for the guest
s390: ap: implement PAPQ AQIC interception in kernel
vfio: ap: register IOMMU VFIO notifier
s390: ap: kvm: add PQAP interception for AQIC
s390/unwind: cleanup unused READ_ONCE_TASK_STACK
s390/kasan: avoid false positives during stack unwind
s390/qdio: don't touch the dsci in tiqdio_add_input_queues()
s390/qdio: (re-)initialize tiqdio list entries
s390/dasd: Fix a precision vs width bug in dasd_feature_list()
s390/cio: introduce driver_override on the css bus
vfio-ccw: make convert_ccw0_to_ccw1 static
vfio-ccw: Remove copy_ccw_from_iova()
vfio-ccw: Factor out the ccw0-to-ccw1 transition
vfio-ccw: Copy CCW data outside length calculation
...
|
|
This patch adds 'DAXDEV_SYNC' flag which is set
for nd_region doing synchronous flush. This later
is used to disable MAP_SYNC functionality for
ext4 & xfs filesystem for devices don't support
synchronous flush.
Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
When processing Format-0 CCWs, we use the "len" variable as the
number of CCWs to convert to Format-1. But that variable
contains zero here, and is not a meaningful CCW count until
ccwchain_calc_length() returns. Since that routine requires and
expects Format-1 CCWs to identify the chaining behavior, the
format conversion must be done first.
Convert the 2KB we copied even if it's more than we need.
Fixes: 7f8e89a8f2fd ("vfio-ccw: Factor out the ccw0-to-ccw1 transition")
Reported-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190702180928.18113-1-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
|
|
We register a AP PQAP instruction hook during the open
of the mediated device. And unregister it on release.
During the probe of the AP device, we allocate a vfio_ap_queue
structure to keep track of the information we need for the
PQAP/AQIC instruction interception.
In the AP PQAP instruction hook, if we receive a demand to
enable IRQs,
- we retrieve the vfio_ap_queue based on the APQN we receive
in REG1,
- we retrieve the page of the guest address, (NIB), from
register REG2
- we retrieve the mediated device to use the VFIO pinning
infrastructure to pin the page of the guest address,
- we retrieve the pointer to KVM to register the guest ISC
and retrieve the host ISC
- finaly we activate GISA
If we receive a demand to disable IRQs,
- we deactivate GISA
- unregister from the GIB
- unpin the NIB
When removing the AP device from the driver the device is
reseted and this process unregisters the GISA from the GIB,
and unpins the NIB address then we free the vfio_ap_queue
structure.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Acked-by: Tony Krowiak <akrowiak@linux.ibm.com>
Acked-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
To be able to use the VFIO interface to facilitate the
mediated device memory pinning/unpinning we need to register
a notifier for IOMMU.
While we will start to pin one guest page for the interrupt indicator
byte, this is still ok with ballooning as this page will never be
used by the guest virtio-balloon driver.
So the pinned page will never be freed. And even a broken guest does
so, that would not impact the host as the original page is still
in control by vfio.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Acked-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
We prepare the interception of the PQAP/AQIC instruction for
the case the AQIC facility is enabled in the guest.
First of all we do not want to change existing behavior when
intercepting AP instructions without the SIE allowing the guest
to use AP instructions.
In this patch we only handle the AQIC interception allowed by
facility 65 which will be enabled when the complete interception
infrastructure will be present.
We add a callback inside the KVM arch structure for s390 for
a VFIO driver to handle a specific response to the PQAP
instruction with the AQIC command and only this command.
But we want to be able to return a correct answer to the guest
even there is no VFIO AP driver in the kernel.
Therefor, we inject the correct exceptions from inside KVM for the
case the callback is not initialized, which happens when the vfio_ap
driver is not loaded.
We do consider the responsibility of the driver to always initialize
the PQAP callback if it defines queues by initializing the CRYCB for
a guest.
If the callback has been setup we call it.
If not we setup an answer considering that no queue is available
for the guest when no callback has been setup.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Acked-by: Harald Freudenberger <freude@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Current code sets the dsci to 0x00000080. Which doesn't make any sense,
as the indicator area is located in the _left-most_ byte.
Worse: if the dsci is the _shared_ indicator, this potentially clears
the indication of activity for a _different_ device.
tiqdio_thinint_handler() will then have no reason to call that device's
IRQ handler, and the device ends up stalling.
Fixes: d0c9d4a89fff ("[S390] qdio: set correct bit in dsci")
Cc: <stable@vger.kernel.org>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
When tiqdio_remove_input_queues() removes a queue from the tiq_list as
part of qdio_shutdown(), it doesn't re-initialize the queue's list entry
and the prev/next pointers go stale.
If a subsequent qdio_establish() fails while sending the ESTABLISH cmd,
it calls qdio_shutdown() again in QDIO_IRQ_STATE_ERR state and
tiqdio_remove_input_queues() will attempt to remove the queue entry a
second time. This dereferences the stale pointers, and bad things ensue.
Fix this by re-initializing the list entry after removing it from the
list.
For good practice also initialize the list entry when the queue is first
allocated, and remove the quirky checks that papered over this omission.
Note that prior to
commit e521813468f7 ("s390/qdio: fix access to uninitialized qdio_q fields"),
these checks were bogus anyway.
setup_queues_misc() clears the whole queue struct, and thus needs to
re-init the prev/next pointers as well.
Fixes: 779e6e1c724d ("[S390] qdio: new qdio driver.")
Cc: <stable@vger.kernel.org>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
