summaryrefslogtreecommitdiff
path: root/drivers/s390
AgeCommit message (Collapse)AuthorFilesLines
2022-05-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski6-24/+59
No conflicts. Build issue in drivers/net/ethernet/sfc/ptp.c 54fccfdd7c66 ("sfc: efx_default_channel_type APIs can be static") 49e6123c65da ("net: sfc: fix memory leak due to ptp channel") https://lore.kernel.org/all/20220510130556.52598fe2@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-12Merge tag 'net-5.18-rc7' of ↵Linus Torvalds3-10/+8
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from wireless, and bluetooth. No outstanding fires. Current release - regressions: - eth: atlantic: always deep reset on pm op, fix null-deref Current release - new code bugs: - rds: use maybe_get_net() when acquiring refcount on TCP sockets [refinement of a previous fix] - eth: ocelot: mark traps with a bool instead of guessing type based on list membership Previous releases - regressions: - net: fix skipping features in for_each_netdev_feature() - phy: micrel: fix null-derefs on suspend/resume and probe - bcmgenet: check for Wake-on-LAN interrupt probe deferral Previous releases - always broken: - ipv4: drop dst in multicast routing path, prevent leaks - ping: fix address binding wrt vrf - net: fix wrong network header length when BPF protocol translation is used on skbs with a fraglist - bluetooth: fix the creation of hdev->name - rfkill: uapi: fix RFKILL_IOCTL_MAX_SIZE ioctl request definition - wifi: iwlwifi: iwl-dbg: use del_timer_sync() before freeing - wifi: ath11k: reduce the wait time of 11d scan and hw scan while adding an interface - mac80211: fix rx reordering with non explicit / psmp ack policy - mac80211: reset MBSSID parameters upon connection - nl80211: fix races in nl80211_set_tx_bitrate_mask() - tls: fix context leak on tls_device_down - sched: act_pedit: really ensure the skb is writable - batman-adv: don't skb_split skbuffs with frag_list - eth: ocelot: fix various issues with TC actions (null-deref; bad stats; ineffective drops; ineffective filter removal)" * tag 'net-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (61 commits) tls: Fix context leak on tls_device_down net: sfc: ef10: fix memory leak in efx_ef10_mtd_probe() net/smc: non blocking recvmsg() return -EAGAIN when no data and signal_pending net: dsa: bcm_sf2: Fix Wake-on-LAN with mac_link_down() mlxsw: Avoid warning during ip6gre device removal net: bcmgenet: Check for Wake-on-LAN interrupt probe deferral net: ethernet: mediatek: ppe: fix wrong size passed to memset() Bluetooth: Fix the creation of hdev->name i40e: i40e_main: fix a missing check on list iterator net/sched: act_pedit: really ensure the skb is writable s390/lcs: fix variable dereferenced before check s390/ctcm: fix potential memory leak s390/ctcm: fix variable dereferenced before check net: atlantic: verify hw_head_ lies within TX buffer ring net: atlantic: add check for MAX_SKB_FRAGS net: atlantic: reduce scope of is_rsc_complete net: atlantic: fix "frag[0] not initialized" net: stmmac: fix missing pci_disable_device() on error in stmmac_pci_probe() net: phy: micrel: Fix incorrect variable type in micrel decnet: Use container_of() for struct dn_neigh casts ...
2022-05-11s390/lcs: fix variable dereferenced before checkAlexandra Winter1-3/+4
smatch complains about drivers/s390/net/lcs.c:1741 lcs_get_control() warn: variable dereferenced before check 'card->dev' (see line 1739) Fixes: 27eb5ac8f015 ("[PATCH] s390: lcs driver bug fixes and improvements [1/2]") Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-11s390/ctcm: fix potential memory leakAlexandra Winter1-5/+1
smatch complains about drivers/s390/net/ctcm_mpc.c:1210 ctcmpc_unpack_skb() warn: possible memory leak of 'mpcginfo' mpc_action_discontact() did not free mpcginfo. Consolidate the freeing in ctcmpc_unpack_skb(). Fixes: 293d984f0e36 ("ctcm: infrastructure for replaced ctc driver") Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-11s390/ctcm: fix variable dereferenced before checkAlexandra Winter1-2/+3
Found by cppcheck and smatch. smatch complains about drivers/s390/net/ctcm_sysfs.c:43 ctcm_buffer_write() warn: variable dereferenced before check 'priv' (see line 42) Fixes: 3c09e2647b5e ("ctcm: rename READ/WRITE defines to avoid redefinitions") Reported-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-06net: make drivers set the TSO limit not the GSO limitJakub Kicinski2-2/+2
Drivers should call the TSO setting helper, GSO is controllable by user space. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-05s390/dasd: Use kzalloc instead of kmalloc/memsetHaowen Bai1-4/+1
Use kzalloc rather than duplicating its implementation, which makes code simple and easy to understand. Signed-off-by: Haowen Bai <baihaowen@meizu.com> Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Link: https://lore.kernel.org/r/20220505141733.1989450-6-sth@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-05-05s390/dasd: Fix read inconsistency for ESE DASD devicesJan Höppner1-2/+1
Read requests that return with NRF error are partially completed in dasd_eckd_ese_read(). The function keeps track of the amount of processed bytes and the driver will eventually return this information back to the block layer for further processing via __dasd_cleanup_cqr() when the request is in the final stage of processing (from the driver's perspective). For this, blk_update_request() is used which requires the number of bytes to complete the request. As per documentation the nr_bytes parameter is described as follows: "number of bytes to complete for @req". This was mistakenly interpreted as "number of bytes _left_ for @req" leading to new requests with incorrect data length. The consequence are inconsistent and completely wrong read requests as data from random memory areas are read back. Fix this by correctly specifying the amount of bytes that should be used to complete the request. Fixes: 5e6bdd37c552 ("s390/dasd: fix data corruption for thin provisioned devices") Cc: stable@vger.kernel.org # 5.3+ Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Link: https://lore.kernel.org/r/20220505141733.1989450-5-sth@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-05-05s390/dasd: Fix read for ESE with blksize < 4kJan Höppner1-4/+3
When reading unformatted tracks on ESE devices, the corresponding memory areas are simply set to zero for each segment. This is done incorrectly for blocksizes < 4096. There are two problems. First, the increment of dst is done using the counter of the loop (off), which is increased by blksize every iteration. This leads to a much bigger increment for dst as actually intended. Second, the increment of dst is done before the memory area is set to 0, skipping a significant amount of bytes of memory. This leads to illegal overwriting of memory and ultimately to a kernel panic. This is not a problem with 4k blocksize because blk_queue_max_segment_size is set to PAGE_SIZE, always resulting in a single iteration for the inner segment loop (bv.bv_len == blksize). The incorrectly used 'off' value to increment dst is 0 and the correct memory area is used. In order to fix this for blksize < 4k, increment dst correctly using the blksize and only do it at the end of the loop. Fixes: 5e2b17e712cf ("s390/dasd: Add dynamic formatting support for ESE volumes") Cc: stable@vger.kernel.org # v5.3+ Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Link: https://lore.kernel.org/r/20220505141733.1989450-4-sth@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-05-05s390/dasd: prevent double format of tracks for ESE devicesStefan Haberland3-2/+26
For ESE devices we get an error for write operations on an unformatted track. Afterwards the track will be formatted and the IO operation restarted. When using alias devices a track might be accessed by multiple requests simultaneously and there is a race window that a track gets formatted twice resulting in data loss. Prevent this by remembering the amount of formatted tracks when starting a request and comparing this number before actually formatting a track on the fly. If the number has changed there is a chance that the current track was finally formatted in between. As a result do not format the track and restart the current IO to check. The number of formatted tracks does not match the overall number of formatted tracks on the device and it might wrap around but this is no problem. It is only needed to recognize that a track has been formatted at all in between. Fixes: 5e2b17e712cf ("s390/dasd: Add dynamic formatting support for ESE volumes") Cc: stable@vger.kernel.org # 5.3+ Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Link: https://lore.kernel.org/r/20220505141733.1989450-3-sth@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-05-05s390/dasd: fix data corruption for ESE devicesStefan Haberland3-2/+20
For ESE devices we get an error when accessing an unformatted track. The handling of this error will return zero data for read requests and format the track on demand before writing to it. To do this the code needs to distinguish between read and write requests. This is done with data from the blocklayer request. A pointer to the blocklayer request is stored in the CQR. If there is an error on the device an ERP request is built to do error recovery. While the ERP request is mostly a copy of the original CQR the pointer to the blocklayer request is not copied to not accidentally pass it back to the blocklayer without cleanup. This leads to the error that during ESE handling after an ERP request was built it is not possible to determine the IO direction. This leads to the formatting of a track for read requests which might in turn lead to data corruption. Fixes: 5e2b17e712cf ("s390/dasd: Add dynamic formatting support for ESE volumes") Cc: stable@vger.kernel.org # 5.3+ Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Link: https://lore.kernel.org/r/20220505141733.1989450-2-sth@linux.ibm.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-05-05net: switch to netif_napi_add_tx()Jakub Kicinski1-2/+1
Switch net callers to the new API not requiring the NAPI_POLL_WEIGHT argument. Acked-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Alex Elder <elder@linaro.org> Acked-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Acked-by: Alexandra Winter <wintera@linux.ibm.com> Link: https://lore.kernel.org/r/20220504163725.550782-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-29qeth: remove a copy of the NAPI_POLL_WEIGHT defineJakub Kicinski4-5/+3
Defining local versions of NAPI_POLL_WEIGHT with the same values in the drivers just makes refactoring harder. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-27s390: cleanup timer API useYu Liao5-27/+10
cleanup the s390's use of the timer API - del_timer() contains timer_pending() condition - mod_timer(timer, expires) is equivalent to: del_timer(timer); timer->expires = expires; add_timer(timer); If the timer is inactive it will be activated, using add_timer() on condition !timer_pending(&private->timer) is redundant. Just cleanup, no logic change. Signed-off-by: Yu Liao <liaoyu15@huawei.com> Link: https://lore.kernel.org/r/20220322030057.1243196-1-liaoyu15@huawei.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-27s390/zcrypt: fix using the correct variable for sizeof()Jakob Koschel1-1/+1
While the original code is valid, it is not the obvious choice for the sizeof() call and in preparation to limit the scope of the list iterator variable the sizeof should be changed to the size of the variable being allocated. Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com> Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-27s390/vfio-ap: fix kernel doc and signature of group notifier functionsTony Krowiak1-19/+5
The vfio_ap device driver registers a group notifier function to handle the VFIO_GROUP_NOTIFY_SET_KVM event signalling the KVM pointer has been set or cleared. There are two helper functions invoked by the handler function: One called when the KVM pointer has been set, and the other when the pointer is cleared. The kernel doc for both of these functions contains a comment introduced by commit 0cc00c8d4050 (s390/vfio-ap: fix circular lockdep when setting/clearing crypto masks) that is no longer valid. This patch removes this comment from the kernel doc of each helper function. Commit 86956e70761b (s390/vfio-ap: replace open coded locks for VFIO_GROUP_NOTIFY_SET_KVM notification) added a parameter to the signature of the helper function that handles the event indicating the KVM pointer has been cleared. The parameter added was the KVM pointer itself. One of the function's primary purposes is to clear the KVM pointer from the ap_matrix_mdev instance in which it is stored. Since the callers of this function derive the KVM pointer passed to the function from the ap_matrix_mdev object itself, it is completely unnecessary to include this parameter in the function's signature since it can simply be retrieved from the ap_matrix_mdev object which is also passed in. This patch removes the KVM pointer from the function's signature. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-27s390/tape: use bitwise instead of arithmetic operator for flagsHaowen Bai1-2/+2
This silences the following coccinelle warning: drivers/s390/char/tape_34xx.c:360:38-39: WARNING: sum of probable bitmasks, consider | Signed-off-by: Haowen Bai <baihaowen@meizu.com> Link: https://lore.kernel.org/r/1647334421-29989-1-git-send-email-baihaowen@meizu.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-27s390: crypto: Use min_t() instead of doing it manuallyHaowen Bai1-1/+1
Fix following coccicheck warning: drivers/s390/crypto/zcrypt_ep11misc.c:1112:25-26: WARNING opportunity for min() Signed-off-by: Haowen Bai <baihaowen@meizu.com> Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-27s390/pkey: fix typos in commentsJulia Lawall1-1/+1
Various spelling mistakes in comments. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Harald Freudenberger <freude@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-27s390/zcrypt: Filter admin CPRBs on custom devicesJuergen Christ1-1/+24
Add a filter for custom devices to check for allowed control domains of admin CPRBs. This filter only applies to custom devices and not to the main device. Signed-off-by: Juergen Christ <jchrist@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-27s390/zcrypt: Add admask to zcdnJuergen Christ2-0/+44
Zcrypt custom devices now support control domain masks. Users can set and modify this mask to allow custom devices to access certain control domains. Signed-off-by: Juergen Christ <jchrist@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-25Merge tag 's390-5.18-1' of ↵Linus Torvalds23-125/+754
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Vasily Gorbik: - Raise minimum supported machine generation to z10, which comes with various cleanups and code simplifications (usercopy/spectre mitigation/etc). - Rework extables and get rid of anonymous out-of-line fixups. - Page table helpers cleanup. Add set_pXd()/set_pte() helper functions. Covert pte_val()/pXd_val() macros to functions. - Optimize kretprobe handling by avoiding extra kprobe on __kretprobe_trampoline. - Add support for CEX8 crypto cards. - Allow to trigger AP bus rescan via writing to /sys/bus/ap/scans. - Add CONFIG_EXPOLINE_EXTERN option to build the kernel without COMDAT group sections which simplifies kpatch support. - Always use the packed stack layout and extend kernel unwinder tests. - Add sanity checks for ftrace code patching. - Add s390dbf debug log for the vfio_ap device driver. - Various virtual vs physical address confusion fixes. - Various small fixes and improvements all over the code. * tag 's390-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (69 commits) s390/test_unwind: add kretprobe tests s390/kprobes: Avoid additional kprobe in kretprobe handling s390: convert ".insn" encoding to instruction names s390: assume stckf is always present s390/nospec: move to single register thunks s390: raise minimum supported machine generation to z10 s390/uaccess: Add copy_from/to_user_key functions s390/nospec: align and size extern thunks s390/nospec: add an option to use thunk-extern s390/nospec: generate single register thunks if possible s390/pci: make zpci_set_irq()/zpci_clear_irq() static s390: remove unused expoline to BC instructions s390/irq: use assignment instead of cast s390/traps: get rid of magic cast for per code s390/traps: get rid of magic cast for program interruption code s390/signal: fix typo in comments s390/asm-offsets: remove unused defines s390/test_unwind: avoid build warning with W=1 s390: remove .fixup section s390/bpf: encode register within extable entry ...
2022-03-24Merge tag 'net-next-5.18' of ↵Linus Torvalds6-13/+8
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "The sprinkling of SPI drivers is because we added a new one and Mark sent us a SPI driver interface conversion pull request. Core ---- - Introduce XDP multi-buffer support, allowing the use of XDP with jumbo frame MTUs and combination with Rx coalescing offloads (LRO). - Speed up netns dismantling (5x) and lower the memory cost a little. Remove unnecessary per-netns sockets. Scope some lists to a netns. Cut down RCU syncing. Use batch methods. Allow netdev registration to complete out of order. - Support distinguishing timestamp types (ingress vs egress) and maintaining them across packet scrubbing points (e.g. redirect). - Continue the work of annotating packet drop reasons throughout the stack. - Switch netdev error counters from an atomic to dynamically allocated per-CPU counters. - Rework a few preempt_disable(), local_irq_save() and busy waiting sections problematic on PREEMPT_RT. - Extend the ref_tracker to allow catching use-after-free bugs. BPF --- - Introduce "packing allocator" for BPF JIT images. JITed code is marked read only, and used to be allocated at page granularity. Custom allocator allows for more efficient memory use, lower iTLB pressure and prevents identity mapping huge pages from getting split. - Make use of BTF type annotations (e.g. __user, __percpu) to enforce the correct probe read access method, add appropriate helpers. - Convert the BPF preload to use light skeleton and drop the user-mode-driver dependency. - Allow XDP BPF_PROG_RUN test infra to send real packets, enabling its use as a packet generator. - Allow local storage memory to be allocated with GFP_KERNEL if called from a hook allowed to sleep. - Introduce fprobe (multi kprobe) to speed up mass attachment (arch bits to come later). - Add unstable conntrack lookup helpers for BPF by using the BPF kfunc infra. - Allow cgroup BPF progs to return custom errors to user space. - Add support for AF_UNIX iterator batching. - Allow iterator programs to use sleepable helpers. - Support JIT of add, and, or, xor and xchg atomic ops on arm64. - Add BTFGen support to bpftool which allows to use CO-RE in kernels without BTF info. - Large number of libbpf API improvements, cleanups and deprecations. Protocols --------- - Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev. - Adjust TSO packet sizes based on min_rtt, allowing very low latency links (data centers) to always send full-sized TSO super-frames. - Make IPv6 flow label changes (AKA hash rethink) more configurable, via sysctl and setsockopt. Distinguish between server and client behavior. - VxLAN support to "collect metadata" devices to terminate only configured VNIs. This is similar to VLAN filtering in the bridge. - Support inserting IPv6 IOAM information to a fraction of frames. - Add protocol attribute to IP addresses to allow identifying where given address comes from (kernel-generated, DHCP etc.) - Support setting socket and IPv6 options via cmsg on ping6 sockets. - Reject mis-use of ECN bits in IP headers as part of DSCP/TOS. Define dscp_t and stop taking ECN bits into account in fib-rules. - Add support for locked bridge ports (for 802.1X). - tun: support NAPI for packets received from batched XDP buffs, doubling the performance in some scenarios. - IPv6 extension header handling in Open vSwitch. - Support IPv6 control message load balancing in bonding, prevent neighbor solicitation and advertisement from using the wrong port. Support NS/NA monitor selection similar to existing ARP monitor. - SMC - improve performance with TCP_CORK and sendfile() - support auto-corking - support TCP_NODELAY - MCTP (Management Component Transport Protocol) - add user space tag control interface - I2C binding driver (as specified by DMTF DSP0237) - Multi-BSSID beacon handling in AP mode for WiFi. - Bluetooth: - handle MSFT Monitor Device Event - add MGMT Adv Monitor Device Found/Lost events - Multi-Path TCP: - add support for the SO_SNDTIMEO socket option - lots of selftest cleanups and improvements - Increase the max PDU size in CAN ISOTP to 64 kB. Driver API ---------- - Add HW counters for SW netdevs, a mechanism for devices which offload packet forwarding to report packet statistics back to software interfaces such as tunnels. - Select the default NIC queue count as a fraction of number of physical CPU cores, instead of hard-coding to 8. - Expose devlink instance locks to drivers. Allow device layer of drivers to use that lock directly instead of creating their own which always runs into ordering issues in devlink callbacks. - Add header/data split indication to guide user space enabling of TCP zero-copy Rx. - Allow configuring completion queue event size. - Refactor page_pool to enable fragmenting after allocation. - Add allocation and page reuse statistics to page_pool. - Improve Multiple Spanning Trees support in the bridge to allow reuse of topologies across VLANs, saving HW resources in switches. - DSA (Distributed Switch Architecture): - replay and offload of host VLAN entries - offload of static and local FDB entries on LAG interfaces - FDB isolation and unicast filtering New hardware / drivers ---------------------- - Ethernet: - LAN937x T1 PHYs - Davicom DM9051 SPI NIC driver - Realtek RTL8367S, RTL8367RB-VB switch and MDIO - Microchip ksz8563 switches - Netronome NFP3800 SmartNICs - Fungible SmartNICs - MediaTek MT8195 switches - WiFi: - mt76: MediaTek mt7916 - mt76: MediaTek mt7921u USB adapters - brcmfmac: Broadcom BCM43454/6 - Mobile: - iosm: Intel M.2 7360 WWAN card Drivers ------- - Convert many drivers to the new phylink API built for split PCS designs but also simplifying other cases. - Intel Ethernet NICs: - add TTY for GNSS module for E810T device - improve AF_XDP performance - GTP-C and GTP-U filter offload - QinQ VLAN support - Mellanox Ethernet NICs (mlx5): - support xdp->data_meta - multi-buffer XDP - offload tc push_eth and pop_eth actions - Netronome Ethernet NICs (nfp): - flow-independent tc action hardware offload (police / meter) - AF_XDP - Other Ethernet NICs: - at803x: fiber and SFP support - xgmac: mdio: preamble suppression and custom MDC frequencies - r8169: enable ASPM L1.2 if system vendor flags it as safe - macb/gem: ZynqMP SGMII - hns3: add TX push mode - dpaa2-eth: software TSO - lan743x: multi-queue, mdio, SGMII, PTP - axienet: NAPI and GRO support - Mellanox Ethernet switches (mlxsw): - source and dest IP address rewrites - RJ45 ports - Marvell Ethernet switches (prestera): - basic routing offload - multi-chain TC ACL offload - NXP embedded Ethernet switches (ocelot & felix): - PTP over UDP with the ocelot-8021q DSA tagging protocol - basic QoS classification on Felix DSA switch using dcbnl - port mirroring for ocelot switches - Microchip high-speed industrial Ethernet (sparx5): - offloading of bridge port flooding flags - PTP Hardware Clock - Other embedded switches: - lan966x: PTP Hardward Clock - qca8k: mdio read/write operations via crafted Ethernet packets - Qualcomm 802.11ax WiFi (ath11k): - add LDPC FEC type and 802.11ax High Efficiency data in radiotap - enable RX PPDU stats in monitor co-exist mode - Intel WiFi (iwlwifi): - UHB TAS enablement via BIOS - band disablement via BIOS - channel switch offload - 32 Rx AMPDU sessions in newer devices - MediaTek WiFi (mt76): - background radar detection - thermal management improvements on mt7915 - SAR support for more mt76 platforms - MBSSID and 6 GHz band on mt7915 - RealTek WiFi: - rtw89: AP mode - rtw89: 160 MHz channels and 6 GHz band - rtw89: hardware scan - Bluetooth: - mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS) - Microchip CAN (mcp251xfd): - multiple RX-FIFOs and runtime configurable RX/TX rings - internal PLL, runtime PM handling simplification - improve chip detection and error handling after wakeup" * tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits) llc: fix netdevice reference leaks in llc_ui_bind() drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool ice: don't allow to run ice_send_event_to_aux() in atomic ctx ice: fix 'scheduling while atomic' on aux critical err interrupt net/sched: fix incorrect vlan_push_eth dest field net: bridge: mst: Restrict info size queries to bridge ports net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init() drivers: net: xgene: Fix regression in CRC stripping net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT net: dsa: fix missing host-filtered multicast addresses net/mlx5e: Fix build warning, detected write beyond size of field iwlwifi: mvm: Don't fail if PPAG isn't supported selftests/bpf: Fix kprobe_multi test. Revert "rethook: x86: Add rethook x86 implementation" Revert "arm64: rethook: Add arm64 rethook implementation" Revert "powerpc: Add rethook support" Revert "ARM: rethook: Add rethook arm implementation" netdevice: add missing dm_private kdoc net: bridge: mst: prevent NULL deref in br_mst_info_size() selftests: forwarding: Use same VRF for port and VLAN upper ...
2022-03-21Merge tag 'for-5.18/block-2022-03-18' of git://git.kernel.dk/linux-blockLinus Torvalds3-3/+0
Pull block updates from Jens Axboe: - BFQ cleanups and fixes (Yu, Zhang, Yahu, Paolo) - blk-rq-qos completion fix (Tejun) - blk-cgroup merge fix (Tejun) - Add offline error return value to distinguish it from an IO error on the device (Song) - IO stats fixes (Zhang, Christoph) - blkcg refcount fixes (Ming, Yu) - Fix for indefinite dispatch loop softlockup (Shin'ichiro) - blk-mq hardware queue management improvements (Ming) - sbitmap dead code removal (Ming, John) - Plugging merge improvements (me) - Show blk-crypto capabilities in sysfs (Eric) - Multiple delayed queue run improvement (David) - Block throttling fixes (Ming) - Start deprecating auto module loading based on dev_t (Christoph) - bio allocation improvements (Christoph, Chaitanya) - Get rid of bio_devname (Christoph) - bio clone improvements (Christoph) - Block plugging improvements (Christoph) - Get rid of genhd.h header (Christoph) - Ensure drivers use appropriate flush helpers (Christoph) - Refcounting improvements (Christoph) - Queue initialization and teardown improvements (Ming, Christoph) - Misc fixes/improvements (Barry, Chaitanya, Colin, Dan, Jiapeng, Lukas, Nian, Yang, Eric, Chengming) * tag 'for-5.18/block-2022-03-18' of git://git.kernel.dk/linux-block: (127 commits) block: cancel all throttled bios in del_gendisk() block: let blkcg_gq grab request queue's refcnt block: avoid use-after-free on throttle data block: limit request dispatch loop duration block/bfq-iosched: Fix spelling mistake "tenative" -> "tentative" sr: simplify the local variable initialization in sr_block_open() block: don't merge across cgroup boundaries if blkcg is enabled block: fix rq-qos breakage from skipping rq_qos_done_bio() block: flush plug based on hardware and software queue order block: ensure plug merging checks the correct queue at least once block: move rq_qos_exit() into disk_release() block: do more work in elevator_exit block: move blk_exit_queue into disk_release block: move q_usage_counter release into blk_queue_release block: don't remove hctx debugfs dir from blk_mq_exit_queue block: move blkcg initialization/destroy into disk allocation/release handler sr: implement ->free_disk to simplify refcounting sd: implement ->free_disk to simplify refcounting sd: delay calling free_opal_dev sd: call sd_zbc_release_disk before releasing the scsi_device reference ...
2022-03-21s390/ctcm: fix typo "length to short" -> "length too short"Tong Zhang1-1/+1
"packet length to short" -> "packet length too short" Signed-off-by: Tong Zhang <ztong0001@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-08s390/extable: move EX_TABLE define to asm-extable.hHeiko Carstens4-1/+4
Follow arm64 and riscv and move the EX_TABLE define to asm-extable.h which is a lot less generic than the current linkage.h. Also make sure that all files which contain EX_TABLE usages actually include the new header file. This should make sure that the files always compile and there won't be any random compile breakage due to other header file dependencies. Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-08s390/airq: use DMA memory for summary indicatorsHalil Pasic1-2/+2
Protected virtualization guests have to use shared pages for airq notifier bit vectors and summary bytes or bits, thus these need to be allocated as DMA coherent memory. Commit b50623e5db80 ("s390/airq: use DMA memory for adapter interrupts") took care of the notifier bit vectors, but omitted to take care of the summary bytes/bits. In practice this omission is not a big deal, because the summary ain't necessarily allocated here, but can be supplied by the driver. Currently all the I/O we have for SE guests is virtio-ccw, and virtio-ccw uses a self-allocated array of summary indicators. Let us cover all our bases nevertheless! Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Reviewed-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-08s390/zcrypt: Provide target domain for EP11 cprbs to scheduling functionJürgen Christ3-6/+10
The scheduling function will get an extension which will process the target_id value from an EP11 cprb. This patch extracts the value during preparation of the ap message. Signed-off-by: Jürgen Christ <jchrist@linux.ibm.com> Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-08s390/zcrypt: change reply buffer size offeringHarald Freudenberger1-1/+22
Instead of offering the user space given receive buffer size to the crypto card firmware as limit for the reply message offer the internal per queue reply buffer size. As the queue's reply buffer is always adjusted to the max message size possible for this card this may offer more buffer space. However, now it is important to check the user space reply buffer on pushing back the reply. If the reply does not fit into the user space provided buffer the ioctl will fail with errno EMSGSIZE. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Jürgen Christ <jchrist@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-08s390/zcrypt: Support CPRB minor version T7Harald Freudenberger6-27/+60
There is a new CPRB minor version T7 to be supported with this patch. Together with this the functions which extract the CPRB data from userspace and prepare the AP message do now check the CPRB minor version and provide some info in the flag field of the ap message struct for further processing. The 3 functions doing this job have been renamed to prep_cca_ap_msg, prep_ep11_ap_msg and prep_rng_ap_msg to reflect their job better (old was get..fc). This patch also introduces two new flags to be used internal with the flag field of the struct ap_message: AP_MSG_FLAG_USAGE is set when prep_cca_ap_msg or prep_ep11_ap_msg come to the conclusion that this is a ordinary crypto load CPRB (which means T2 for CCA CPRBs and no admin bit for EP11 CPRBs). AP_MSG_FLAG_ADMIN is set when prep_cca_ap_msg or prep_ep11_ap_msg think, this is an administrative (control) crypto load CPRB (which means T3, T5, T6 or T7 for CCA CPRBs and admin bit set for EP11 CPRBs). Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Jürgen Christ <jchrist@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-08s390/zcrypt: handle checkstopped cards with new stateHarald Freudenberger5-30/+105
A crypto card may be in checkstopped state. With this patch this is handled as a new state in the ap card and ap queue structs. There is also a new card sysfs attribute /sys/devices/ap/cardxx/chkstop and a new queue sysfs attribute /sys/devices/ap/cardxx/xx.yyyy/chkstop displaying the checkstop state of the card or queue. Please note that the queue's checkstop state is only a copy of the card's checkstop state but makes maintenance much easier. The checkstop state expressed here is the result of an RC 0x04 (CHECKSTOP) during an AP command, mostly the PQAP(TAPQ) command which is 'testing' the queue. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Jürgen Christ <jchrist@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-08s390/zcrypt: CEX8S exploitation supportHarald Freudenberger4-26/+60
This patch adds CEX8 exploitation support for the AP bus code, the zcrypt device driver zoo and the vfio device driver. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Jürgen Christ <jchrist@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-08s390/ap/zcrypt: debug feature improvementsHarald Freudenberger4-4/+58
This patch adds some debug feature improvements related to some failures happened in the past. With CEX8 the max request and response sizes have been extended but the user space applications did not rework their code and thus ran into receive buffer issues. This ffdc patch here helps with additional checks and debug feature messages in debugging and pointing to the root cause of some failures related to wrong buffer sizes. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Jürgen Christ <jchrist@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-07s390: net: Use netif_rx().Sebastian Andrzej Siewior2-6/+2
Since commit baebdf48c3600 ("net: dev: Makes sure netif_rx() can be invoked in any context.") the function netif_rx() can be used in preemptible/thread context as well as in interrupt context. Use netif_rx(). Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Alexandra Winter <wintera@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Wenjia Zhang <wenjia@linux.ibm.com> Cc: linux-s390@vger.kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-01s390/ap: enable sysfs attribute scans to force AP bus rescanHarald Freudenberger1-1/+11
This patch switches the sysfs attribute /sys/bus/ap/scans from read-only to read-write. If there is something written to this attribute, an AP bus rescan is forced. If an AP bus scan is triggered this way a debug feature entry line reports this in /sys/kernel/debug/s390dbf/ap/sprintf. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Jakob Naucke <naucke@linux.ibm.com> Reviewed-by: Juergen Christ <jchrist@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-01s390/ap: notify drivers on config changed and scan complete callbacksTony Krowiak2-2/+91
This patch introduces an extension to the ap bus to notify device drivers when the host AP configuration changes - i.e., adapters, domains or control domains are added or removed. When an adapter or domain is added to the host's AP configuration, the AP bus will create the associated queue devices in the linux sysfs device model. Each new type 10 (i.e., CEX4) or newer queue device with an APQN that is not reserved for the default device driver will get bound to the vfio_ap device driver. Likewise, whan an adapter or domain is removed from the host's AP configuration, the AP bus will remove the associated queue devices from the sysfs device model. Each of the queues that is bound to the vfio_ap device driver will get unbound. With the introduction of hot plug support, binding or unbinding of a queue device will result in plugging or unplugging one or more queues from a guest that is using the queue. If there are multiple changes to the host's AP configuration, it could result in the probe and remove callbacks getting invoked multiple times. Each time queues are plugged into or unplugged from a guest, the guest's VCPUs must be taken out of SIE. If this occurs multiple times due to changes in the host's AP configuration, that can have an undesirable negative affect on the guest's performance. To alleviate this problem, this patch introduces two new callbacks: one to notify the vfio_ap device driver when the AP bus scan routine detects a change to the host's AP configuration; and, one to notify the driver when the AP bus is done scanning. This will allow the vfio_ap driver to do bulk processing of all affected adapters, domains and control domains for affected guests rather than plugging or unplugging them one at a time when the probe or remove callback is invoked. The two new callbacks are: void (*on_config_changed)(struct ap_config_info *new_config_info, struct ap_config_info *old_config_info); This callback is invoked at the start of the AP bus scan function when it determines that the host AP configuration information has changed since the previous scan. This is done by storing an old and current QCI info struct and comparing them. If there is any difference, the callback is invoked. void (*on_scan_complete)(struct ap_config_info *new_config_info, struct ap_config_info *old_config_info); The on_scan_complete callback is invoked after the ap bus scan is completed if the host AP configuration data has changed. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-01s390/ap: driver callback to indicate resource in useTony Krowiak2-10/+139
Introduces a new driver callback to prevent a root user from re-assigning the APQN of a queue that is in use by a non-default host device driver to a default host device driver and vice versa. The callback will be invoked whenever a change to the AP bus's sysfs apmask or aqmask attributes would result in one or more APQNs being re-assigned. If the callback responds in the affirmative for any driver queried, the change to the apmask or aqmask will be rejected with a device busy error. For this patch, only non-default drivers will be queried. Currently, there is only one non-default driver, the vfio_ap device driver. The vfio_ap device driver facilitates pass-through of an AP queue to a guest. The idea here is that a guest may be administered by a different sysadmin than the host and we don't want AP resources to unexpectedly disappear from a guest's AP configuration (i.e., adapters and domains assigned to the matrix mdev). This will enforce the proper procedure for removing AP resources intended for guest usage which is to first unassign them from the matrix mdev, then unbind them from the vfio_ap device driver. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-03-01Merge branch 'fixes' into featuresVasily Gorbik1-1/+1
This helps to avoid several merge conflicts later. * fixes: s390/extable: fix exception table sorting s390/ftrace: fix arch_ftrace_get_regs implementation s390/ftrace: fix ftrace_caller/ftrace_regs_caller generation s390/setup: preserve memory at OLDMEM_BASE and OLDMEM_SIZE s390/cio: verify the driver availability for path_event call s390/module: fix building test_modules_helpers.o with clang MAINTAINERS: downgrade myself to Reviewer for s390 MAINTAINERS: add Alexander Gordeev as maintainer for s390 Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-02-22s390/net: sort out physical vs virtual pointers usageAlexander Gordeev2-5/+5
Fix virtual vs physical address confusion (which currently are the same). Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-17s390/qeth: Remove redundant 'flush_workqueue()' callsXu Wang1-1/+0
'destroy_workqueue()' already drains the queue before destroying it, so there is no need to flush it explicitly. Remove the redundant 'flush_workqueue()' calls. Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Acked-by: Alexandra Winter <wintera@linux.ibm.com> Link: https://lore.kernel.org/r/20220216075155.940-1-vulab@iscas.ac.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-09s390/maccess: fix semantics of memcpy_real() and its callersAlexander Gordeev1-2/+1
There is a confusion with regard to the source address of memcpy_real() and calling functions. While the declared type for a source assumes a virtual address, in fact it always called with physical address of the source. This confusion led to bugs in copy_oldmem_kernel() and copy_oldmem_user() functions, where __pa() macro applied mistakenly to physical addresses. It does not lead to a real issue, since virtual and physical addresses are currently the same. Fix both the bugs and memcpy_real() prototype by making type of source address consistent to the function name and the way it actually used. Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-02-09s390/cio: verify the driver availability for path_event callVineeth Vijayan1-1/+1
If no driver is attached to a device or the driver does not provide the path_event function, an FCES path-event on this device could end up in a kernel-panic. Verify the driver availability before the path_event function call. Fixes: 32ef938815c1 ("s390/cio: Add support for FCES status notification") Cc: stable@vger.kernel.org Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com> Suggested-by: Peter Oberparleiter <oberpar@linux.ibm.com> Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-02-06s390/sclp_sdias: fix sclp_sdias_copy() virtual vs physical address confusionAlexander Gordeev1-1/+1
Due to historical reasons sclp_sdias_copy() misuses the notion of physical vs virtual addresses difference. Note: this does not fix a bug currently, since virtual and physical addresses are identical. Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-02-06s390: remove invalid email address of Heiko CarstensHeiko Carstens3-4/+1
Remove my old invalid email address which can be found in a couple of files. Instead of updating it, just remove my contact data completely from source files. We have git and other tools which allow to figure out who is responsible for what with recent contact data. Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-02-06s390/vfio-ap: add s390dbf logging to the vfio_ap_irq_enable functionTony Krowiak2-6/+72
This patch adds s390dbf logging to the function that executes the PQAP(AQIC) instruction on behalf of the guest to which the queue for which interrupts are being enabled or disabled is attached. Currently, the vfio_ap_irq_enable function sets status response code 06 (notification indicator byte address (nib) invalid) in the status word when the vfio_pin_pages function - called to pin the page containing the nib - returns an error or a different number of pages pinned than requested. Setting the response code returned to userspace without also logging a message in the kernel makes it impossible to determine whether the response was due to an error detected by the vfio_ap device driver or because the response code was returned by the firmware in response to the PQAP(AQIC) instruction. In addition to logging a warning for the situation above, this patch adds the following: * A function to validate the nib address invoked prior to calling the vfio_pin_pages function. This allows for logging a message informing the reader of the reason the page containing the nib can not be pinned if the nib address is not valid. Response code 06 (invalid nib address) will be set in the status word returned to the guest from the instruction. * Checks the return value from the kvm_s390_gisc_register and logs a message informing the reader of the failure. Status response code 08 (invalid gisa) will be set in the status word returned to the guest from the PQAP(AQIC) instruction. * Checks the status response code returned from execution of the PQAP(AQIC) instruction and if it indicates an error, logs a message informing the reader. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-02-06s390/vfio-ap: add s390dbf logging to the handle_pqap functionTony Krowiak1-6/+68
This patch adds s390dbf logging to the function that handles interception of the PQAP(AQIC) instruction. Several items of data are validated before ultimately calling the functions that execute the PQAP(AQIC) instruction on behalf of the guest to which the queue for which interrupts are being enabled or disabled is attached. Currently, the handle_pqap function sets status response code 01 (queue not available) in the status word that is normally returned from the PQAP(AQIC) instruction under the following conditions: * Set when the function pointer to the handler is not set in the kvm_s390_crypto object (i.e., the PQAP hook is not registered). * Set when the KVM pointer is not set in the ap_matrix_mdev object (i.e., the matrix mdev is not passed through to a guest). * Set when the queue for which interrupts are being enabled or disabled is either not bound to the vfio_ap device driver or not assigned to the matrix mdev. Setting the response code returned to userspace without also logging a message in the kernel makes it impossible to determine whether the response was due to an error detected by the vfio_ap device driver or because the response code was returned by the firmware in response to the PQAP(AQIC) instruction, so this patch logs a message to the s390dbf log for the vfio_ap device driver for each of the situations described above. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-02-06s390-vfio-ap: introduces s390 kernel debug feature for vfio_ap device driverTony Krowiak2-0/+53
Sets up an s390dbf debug log for the vfio_ap device driver for logging events occurring during the lifetime of the driver. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2022-02-02block: remove genhd.hChristoph Hellwig3-3/+0
There is no good reason to keep genhd.h separate from the main blkdev.h header that includes it. So fold the contents of genhd.h into blkdev.h and remove genhd.h entirely. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20220124093913.742411-4-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-01-24scsi: zfcp: Fix failed recovery on gone remote port with non-NPIV FCP devicesSteffen Maier1-1/+12
Suppose we have an environment with a number of non-NPIV FCP devices (virtual HBAs / FCP devices / zfcp "adapter"s) sharing the same physical FCP channel (HBA port) and its I_T nexus. Plus a number of storage target ports zoned to such shared channel. Now one target port logs out of the fabric causing an RSCN. Zfcp reacts with an ADISC ELS and subsequent port recovery depending on the ADISC result. This happens on all such FCP devices (in different Linux images) concurrently as they all receive a copy of this RSCN. In the following we look at one of those FCP devices. Requests other than FSF_QTCB_FCP_CMND can be slow until they get a response. Depending on which requests are affected by slow responses, there are different recovery outcomes. Here we want to fix failed recoveries on port or adapter level by avoiding recovery requests that can be slow. We need the cached N_Port_ID for the remote port "link" test with ADISC. Just before sending the ADISC, we now intentionally forget the old cached N_Port_ID. The idea is that on receiving an RSCN for a port, we have to assume that any cached information about this port is stale. This forces a fresh new GID_PN [FC-GS] nameserver lookup on any subsequent recovery for the same port. Since we typically can still communicate with the nameserver efficiently, we now reach steady state quicker: Either the nameserver still does not know about the port so we stop recovery, or the nameserver already knows the port potentially with a new N_Port_ID and we can successfully and quickly perform open port recovery. For the one case, where ADISC returns successfully, we re-initialize port->d_id because that case does not involve any port recovery. This also solves a problem if the storage WWPN quickly logs into the fabric again but with a different N_Port_ID. Such as on virtual WWPN takeover during target NPIV failover. [https://www.redbooks.ibm.com/abstracts/redp5477.html] In that case the RSCN from the storage FDISC was ignored by zfcp and we could not successfully recover the failover. On some later failback on the storage, we could have been lucky if the virtual WWPN got the same old N_Port_ID from the SAN switch as we still had cached. Then the related RSCN triggered a successful port reopen recovery. However, there is no guarantee to get the same N_Port_ID on NPIV FDISC. Even though NPIV-enabled FCP devices are not affected by this problem, this code change optimizes recovery time for gone remote ports as a side effect. The timely drop of cached N_Port_IDs prevents unnecessary slow open port attempts. While the problem might have been in code before v2.6.32 commit 799b76d09aee ("[SCSI] zfcp: Decouple gid_pn requests from erp") this fix depends on the gid_pn_work introduced with that commit, so we mark it as culprit to satisfy fix dependencies. Note: Point-to-point remote port is already handled separately and gets its N_Port_ID from the cached peer_d_id. So resetting port->d_id in general does not affect PtP. Link: https://lore.kernel.org/r/20220118165803.3667947-1-maier@linux.ibm.com Fixes: 799b76d09aee ("[SCSI] zfcp: Decouple gid_pn requests from erp") Cc: <stable@vger.kernel.org> #2.6.32+ Suggested-by: Benjamin Block <bblock@linux.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Steffen Maier <maier@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-01-12Merge tag 'libnvdimm-for-5.17' of ↵Linus Torvalds2-19/+9
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull dax and libnvdimm updates from Dan Williams: "The bulk of this is a rework of the dax_operations API after discovering the obstacles it posed to the work-in-progress DAX+reflink support for XFS and other copy-on-write filesystem mechanics. Primarily the need to plumb a block_device through the API to handle partition offsets was a sticking point and Christoph untangled that dependency in addition to other cleanups to make landing the DAX+reflink support easier. The DAX_PMEM_COMPAT option has been around for 4 years and not only are distributions shipping userspace that understand the current configuration API, but some are not even bothering to turn this option on anymore, so it seems a good time to remove it per the deprecation schedule. Recall that this was added after the device-dax subsystem moved from /sys/class/dax to /sys/bus/dax for its sysfs organization. All recent functionality depends on /sys/bus/dax. Some other miscellaneous cleanups and reflink prep patches are included as well. Summary: - Simplify the dax_operations API: - Eliminate bdev_dax_pgoff() in favor of the filesystem maintaining and applying a partition offset to all its DAX iomap operations. - Remove wrappers and device-mapper stacked callbacks for ->copy_from_iter() and ->copy_to_iter() in favor of moving block_device relative offset responsibility to the dax_direct_access() caller. - Remove the need for an @bdev in filesystem-DAX infrastructure - Remove unused uio helpers copy_from_iter_flushcache() and copy_mc_to_iter() as only the non-check_copy_size() versions are used for DAX. - Prepare XFS for the pending (next merge window) DAX+reflink support - Remove deprecated DEV_DAX_PMEM_COMPAT support - Cleanup a straggling misuse of the GUID api" * tag 'libnvdimm-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (38 commits) iomap: Fix error handling in iomap_zero_iter() ACPI: NFIT: Import GUID before use dax: remove the copy_from_iter and copy_to_iter methods dax: remove the DAXDEV_F_SYNC flag dax: simplify dax_synchronous and set_dax_synchronous uio: remove copy_from_iter_flushcache() and copy_mc_to_iter() iomap: turn the byte variable in iomap_zero_iter into a ssize_t memremap: remove support for external pgmap refcounts fsdax: don't require CONFIG_BLOCK iomap: build the block based code conditionally dax: fix up some of the block device related ifdefs fsdax: shift partition offset handling into the file systems dax: return the partition offset from fs_dax_get_by_bdev iomap: add a IOMAP_DAX flag xfs: pass the mapping flags to xfs_bmbt_to_iomap xfs: use xfs_direct_write_iomap_ops for DAX zeroing xfs: move dax device handling into xfs_{alloc,free}_buftarg ext4: cleanup the dax handling in ext4_fill_super ext2: cleanup the dax handling in ext2_fill_super fsdax: decouple zeroing from the iomap buffered I/O code ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-14 19:42:49 +0000