summaryrefslogtreecommitdiff
path: root/drivers/pps
AgeCommit message (Collapse)AuthorFilesLines
2023-01-19tty/serial: Make ->dcd_change()+uart_handle_dcd_change() status bool activeIlpo Järvinen1-3/+3
Convert status parameter for ->dcd_change() and uart_handle_dcd_change() to bool which matches to how the parameter is used. Rename status to active to better describe what the parameter means. Acked-by: Rodolfo Giometti <giometti@enneenne.com> Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20230117090358.4796-9-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-18pps: generators: pps_gen_parport: Switch to use module_parport_driver()Andy Shevchenko1-35/+7
Switch to use module_parport_driver() to reduce boilerplate code. Note, it doesn't matter when we check the module parameter. If it was writable we even would have more flexibility of changing it at runtime (when built-in the kernel) after this patch. Acked-by: Rodolfo Giometti <giometti@enneenne.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220210134943.62026-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-04pps: clients: gpio: Propagate return value from pps_gpio_probeRobert Hancock1-1/+1
If the pps-gpio driver was probed prior to the GPIO device it uses, the devm_gpiod_get call returned an -EPROBE_DEFER error, but pps_gpio_probe replaced that error code with -EINVAL, causing the pps-gpio probe to fail and not be retried later. Propagate the error return value so that deferred probe works properly. Fixes: 161520451dfa (pps: new client driver using GPIO) Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Rodolfo Giometti <giometti@enneenne.com> Signed-off-by: Robert Hancock <robert.hancock@calian.com> Signed-off-by: Rodolfo Giometti <giometti@enneenne.com> Link: https://lore.kernel.org/r/20220112205214.2060954-1-robert.hancock@calian.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-29pps: clients: parport: Switch to use module_parport_driver()Andy Shevchenko1-34/+8
Switch to use module_parport_driver() to reduce boilerplate code. Acked-by: Rodolfo Giometti <giometti@enneenne.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210607153729.58623-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-13tty: no checking of tty_unregister_ldiscJiri Slaby1-7/+1
tty_unregister_ldisc now returns 0 = success. No need to check the return value. In fact, the users only warned if an error occured and didn't do anything useful anyway -- the ldisc module was unloaded in any case. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: William Hubbs <w.d.hubbs@gmail.com> Cc: Chris Brannon <chris@the-brannons.com> Cc: Kirk Reiser <kirk@reisers.ca> Cc: Samuel Thibault <samuel.thibault@ens-lyon.org> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Andreas Koensgen <ajk@comnets.uni-bremen.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Rodolfo Giometti <giometti@enneenne.com> Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Link: https://lore.kernel.org/r/20210505091928.22010-19-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-13tty: make tty_ldisc_ops a param in tty_unregister_ldiscJiri Slaby1-1/+1
Make tty_unregister_ldisc symmetric to tty_register_ldisc by accepting struct tty_ldisc_ops as a parameter instead of ldisc number. This avoids checking of the ldisc number bounds in tty_unregister_ldisc. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: William Hubbs <w.d.hubbs@gmail.com> Cc: Chris Brannon <chris@the-brannons.com> Cc: Kirk Reiser <kirk@reisers.ca> Cc: Samuel Thibault <samuel.thibault@ens-lyon.org> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Andreas Koensgen <ajk@comnets.uni-bremen.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Rodolfo Giometti <giometti@enneenne.com> Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Link: https://lore.kernel.org/r/20210505091928.22010-17-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-13tty: set tty_ldisc_ops::num staticallyJiri Slaby1-1/+2
There is no reason to pass the ldisc number to tty_register_ldisc separately. Just set it in the already defined tty_ldisc_ops in all the ldiscs. This simplifies tty_register_ldisc a bit too (no need to set the num member there). Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: William Hubbs <w.d.hubbs@gmail.com> Cc: Chris Brannon <chris@the-brannons.com> Cc: Kirk Reiser <kirk@reisers.ca> Cc: Samuel Thibault <samuel.thibault@ens-lyon.org> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Andreas Koensgen <ajk@comnets.uni-bremen.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Rodolfo Giometti <giometti@enneenne.com> Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Link: https://lore.kernel.org/r/20210505091928.22010-15-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-26Merge tag 'tty-5.13-rc1' of ↵Linus Torvalds1-3/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty and serial driver updates from Greg KH: "Here is the big set of tty and serial driver updates for 5.13-rc1. Actually busy this release, with a number of cleanups happening: - much needed core tty cleanups by Jiri Slaby - removal of unused and orphaned old-style serial drivers. If anyone shows up with this hardware, it is trivial to restore these but we really do not think they are in use anymore. - fixes and cleanups from Johan Hovold on a number of termios setting corner cases that loads of drivers got wrong as well as removing unneeded code due to tty core changes from long ago that were never propagated out to the drivers - loads of platform-specific serial port driver updates and fixes - coding style cleanups and other small fixes and updates all over the tty/serial tree. All of these have been in linux-next for a while now with no reported issues" * tag 'tty-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (186 commits) serial: extend compile-test coverage serial: stm32: add FIFO threshold configuration dt-bindings: serial: 8250: update TX FIFO trigger level dt-bindings: serial: stm32: override FIFO threshold properties dt-bindings: serial: add RX and TX FIFO properties serial: xilinx_uartps: drop low-latency workaround serial: vt8500: drop low-latency workaround serial: timbuart: drop low-latency workaround serial: sunsu: drop low-latency workaround serial: sifive: drop low-latency workaround serial: txx9: drop low-latency workaround serial: sa1100: drop low-latency workaround serial: rp2: drop low-latency workaround serial: rda: drop low-latency workaround serial: owl: drop low-latency workaround serial: msm_serial: drop low-latency workaround serial: mpc52xx_uart: drop low-latency workaround serial: meson: drop low-latency workaround serial: mcf: drop low-latency workaround serial: lpc32xx_hs: drop low-latency workaround ...
2021-03-24pps: clients: gpio: Rearrange optional stuff in pps_gpio_setup()Andy Shevchenko1-15/+18
Rearrange optional stuff in pps_gpio_setup() so it will go after mandatory one and with reduced indentation. This will increase readability of the sources. Acked-by: Rodolfo Giometti <giometti@enneenne.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210318130321.24227-7-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-24pps: clients: gpio: Use struct device pointer directlyAndy Shevchenko1-23/+19
In most parts of the code the platform device is not used. Use struct device pointer directly to reduce code size and increase readability. Acked-by: Rodolfo Giometti <giometti@enneenne.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210318130321.24227-6-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-24pps: clients: gpio: Make use of device propertiesAndy Shevchenko1-10/+7
Device property API allows to gather device resources from different sources, such as ACPI. Convert the drivers to unleash the power of device property API. Acked-by: Rodolfo Giometti <giometti@enneenne.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210318130321.24227-5-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-24pps: clients: gpio: Get rid of legacy platform dataAndy Shevchenko1-14/+3
Platform data is a legacy interface to supply device properties to the driver. In this case we even don't have in-kernel users for it. Just remove it for good. Acked-by: Rodolfo Giometti <giometti@enneenne.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210318130321.24227-4-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-24pps: clients: gpio: Remove redundant condition in ->remove()Andy Shevchenko1-5/+3
The timer along with GPIO API are NULL-aware, there is no need to test against existing GPIO echo line. Acked-by: Rodolfo Giometti <giometti@enneenne.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210318130321.24227-3-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-24pps: clients: gpio: Use dev_err_probe() to avoid log noiseAndy Shevchenko1-9/+6
When GPIO APIs return -EPROBE_DEFER there is no need to print the message, especially taking into consideration that it may repeat several times. Use dev_err_probe() to avoid log noise in such cases. Acked-by: Rodolfo Giometti <giometti@enneenne.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210318130321.24227-2-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-24pps: clients: gpio: Bail out on error when requesting GPIO echo lineAndy Shevchenko1-5/+5
When requesting optional GPIO echo line, bail out on error, so user will know that something wrong with the existing property. Acked-by: Rodolfo Giometti <giometti@enneenne.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210318130321.24227-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-10tty: remove TTY_LDISC_MAGICJiri Slaby1-3/+0
First, it is never checked. Second, use of it as a debugging aid is at least questionable. With the current tools, I don't think anyone used this kind of thing for debugging purposes for years. On the top of that, e.g. serdev does not set this field of tty_ldisc_ops at all. So get rid of this legacy. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210302062214.29627-8-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada1-1/+1
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2019-07-16drivers/pps/pps.c: clear offset flags in PPS_SETPARAMS ioctlMiroslav Lichvar1-0/+8
The PPS assert/clear offset corrections are set by the PPS_SETPARAMS ioctl in the pps_ktime structs, which also contain flags. The flags are not initialized by applications (using the timepps.h header) and they are not used by the kernel for anything except returning them back in the PPS_GETPARAMS ioctl. Set the flags to zero to make it clear they are unused and avoid leaking uninitialized data of the PPS_SETPARAMS caller to other applications that have a read access to the PPS device. Link: http://lkml.kernel.org/r/20190702092251.24303-1-mlichvar@redhat.com Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Rodolfo Giometti <giometti@enneenne.com> Cc: Greg KH <greg@kroah.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-24treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 61Thomas Gleixner10-148/+10
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 675 mass ave cambridge ma 02139 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 441 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190520071858.739733335@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner6-0/+6
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-14pps: pps-gpio PPS ECHO implementationTom Burkart1-3/+85
This patch implements the PPS ECHO functionality for pps-gpio, that sysfs claims is available already. Configuration is done via device tree bindings. No changes are made to userspace interfaces. This patch was originally written by Lukas Senger as part of a masters thesis project and modified for inclusion into the linux kernel by Tom Burkart. Link: http://lkml.kernel.org/r/20190324043305.6627-4-tom@aussec.com Signed-off-by: Tom Burkart <tom@aussec.com> Acked-by: Rodolfo Giometti <giometti@enneenne.com> Signed-off-by: Lukas Senger <lukas@fridolin.com> Cc: Philipp Zabel <philipp.zabel@gmail.com> Cc: Rob Herring <robh@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14pps: descriptor-based gpioTom Burkart1-36/+31
This patch changes the GPIO access for the pps-gpio driver from the integer based API to the descriptor based API. The integer based API is considered deprecated and the descriptor based API is the preferred way to access GPIOs as per Documentation/driver-api/gpio/intro.rst No changes are made to userspace interfaces. Link: http://lkml.kernel.org/r/20190324043305.6627-2-tom@aussec.com Signed-off-by: Tom Burkart <tom@aussec.com> Acked-by: Rodolfo Giometti <giometti@enneenne.com> Reviewed-by: Philipp Zabel <philipp.zabel@gmail.com> Cc: Lukas Senger <lukas@fridolin.com> Cc: Rob Herring <robh@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-29Merge tag 'kconfig-v4.21' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kconfig updates from Masahiro Yamada: - support -y option for merge_config.sh to avoid downgrading =y to =m - remove S_OTHER symbol type, and touch include/config/*.h files correctly - fix file name and line number in lexer warnings - fix memory leak when EOF is encountered in quotation - resolve all shift/reduce conflicts of the parser - warn no new line at end of file - make 'source' statement more strict to take only string literal - rewrite the lexer and remove the keyword lookup table - convert to SPDX License Identifier - compile C files independently instead of including them from zconf.y - fix various warnings of gconfig - misc cleanups * tag 'kconfig-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (39 commits) kconfig: surround dbg_sym_flags with #ifdef DEBUG to fix gconf warning kconfig: split images.c out of qconf.cc/gconf.c to fix gconf warnings kconfig: add static qualifiers to fix gconf warnings kconfig: split the lexer out of zconf.y kconfig: split some C files out of zconf.y kconfig: convert to SPDX License Identifier kconfig: remove keyword lookup table entirely kconfig: update current_pos in the second lexer kconfig: switch to ASSIGN_VAL state in the second lexer kconfig: stop associating kconf_id with yylval kconfig: refactor end token rules kconfig: stop supporting '.' and '/' in unquoted words treewide: surround Kconfig file paths with double quotes microblaze: surround string default in Kconfig with double quotes kconfig: use T_WORD instead of T_VARIABLE for variables kconfig: use specific tokens instead of T_ASSIGN for assignments kconfig: refactor scanning and parsing "option" properties kconfig: use distinct tokens for type and default properties kconfig: remove redundant token defines kconfig: rename depends_list to comment_option_list ...
2018-12-22treewide: surround Kconfig file paths with double quotesMasahiro Yamada1-2/+2
The Kconfig lexer supports special characters such as '.' and '/' in the parameter context. In my understanding, the reason is just to support bare file paths in the source statement. I do not see a good reason to complicate Kconfig for the room of ambiguity. The majority of code already surrounds file paths with double quotes, and it makes sense since file paths are constant string literals. Make it treewide consistent now. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Ingo Molnar <mingo@kernel.org>
2018-11-27pps: using ERR_PTR instead of NULL while pps_register_source failsYueHaibing5-9/+10
pps_register_source() has keeps error codes in a local variable, but it does not make use of the code. This patch let it return the errcode in case of failure. Suggested-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Rodolfo Giometti <giometti@enneenne.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-14pps: generator: use new parport device modelSudip Mukherjee1-3/+9
Modify pps generator driver to use the new parallel port device model. Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Acked-by: Rodolfo Giometti <giometti@enneenne.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-14pps: client: use new parport device modelSudip Mukherjee1-3/+18
Modify pps client driver to use the new parallel port device model. In that process, added an index to mention the device number when we have more than one parallel port. Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Acked-by: Rodolfo Giometti <giometti@enneenne.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-11vfs: do bulk POLL* -> EPOLL* replacementLinus Torvalds1-1/+1
This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-06pps: parport: use timespec64 instead of timespecArnd Bergmann1-20/+20
getnstimeofday() is deprecated, so I'm converting this to use ktime_get_real_ts64() as a safe replacement. I considered using ktime_get_real() instead, but since the algorithm here depends on the exact timing, I decided to introduce fewer changes and leave the code that determines the nanoseconds since the last seconds wrap untouched. It's not entirely clear to me whether we should also change the time base to CLOCK_BOOTTIME or CLOCK_TAI. With boottime, we would be independent of changes due to settimeofday() and only see the speed adjustment from the upstream clock source, with the downside of having the signal be at an arbirary offset from the start of the UTC second signal. With CLOCK_TAI, we would use the same offset from the UTC second as before and still suffer from settimeofday() adjustments, but would be less confused during leap seconds. Both boottime and tai only offer usable (i.e. avoiding ktime_t to timespec64 conversion) interfaces for ktime_t though, so either way, changing it wouldn't take significantly more work. CLOCK_MONOTONIC could be used with ktime_get_ts64(), but would lose synchronization across a suspend/resume cycle, which seems worse. Link: http://lkml.kernel.org/r/20180116171451.3095620-1-arnd@arndb.de Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Rodolfo Giometti <giometti@enneenne.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-11-28the rest of drivers/*: annotate ->poll() instancesAl Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-11-21treewide: setup_timer() -> timer_setup()Kees Cook1-2/+2
This converts all remaining cases of the old setup_timer() API into using timer_setup(), where the callback argument is the structure already holding the struct timer_list. These should have no behavioral changes, since they just change which pointer is passed into the callback with the same available pointers after conversion. It handles the following examples, in addition to some other variations. Casting from unsigned long: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... setup_timer(&ptr->my_timer, my_callback, ptr); and forced object casts: void my_callback(struct something *ptr) { ... } ... setup_timer(&ptr->my_timer, my_callback, (unsigned long)ptr); become: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... timer_setup(&ptr->my_timer, my_callback, 0); Direct function assignments: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... ptr->my_timer.function = my_callback; have a temporary cast added, along with converting the args: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... ptr->my_timer.function = (TIMER_FUNC_TYPE)my_callback; And finally, callbacks without a data assignment: void my_callback(unsigned long data) { ... } ... setup_timer(&ptr->my_timer, my_callback, 0); have their argument renamed to verify they're unused during conversion: void my_callback(struct timer_list *unused) { ... } ... timer_setup(&ptr->my_timer, my_callback, 0); The conversion is done with the following Coccinelle script: spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/timer_setup.cocci @fix_address_of@ expression e; @@ setup_timer( -&(e) +&e , ...) // Update any raw setup_timer() usages that have a NULL callback, but // would otherwise match change_timer_function_usage, since the latter // will update all function assignments done in the face of a NULL // function initialization in setup_timer(). @change_timer_function_usage_NULL@ expression _E; identifier _timer; type _cast_data; @@ ( -setup_timer(&_E->_timer, NULL, _E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E->_timer, NULL, (_cast_data)_E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E._timer, NULL, &_E); +timer_setup(&_E._timer, NULL, 0); | -setup_timer(&_E._timer, NULL, (_cast_data)&_E); +timer_setup(&_E._timer, NULL, 0); ) @change_timer_function_usage@ expression _E; identifier _timer; struct timer_list _stl; identifier _callback; type _cast_func, _cast_data; @@ ( -setup_timer(&_E->_timer, _callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | _E->_timer@_stl.function = _callback; | _E->_timer@_stl.function = &_callback; | _E->_timer@_stl.function = (_cast_func)_callback; | _E->_timer@_stl.function = (_cast_func)&_callback; | _E._timer@_stl.function = _callback; | _E._timer@_stl.function = &_callback; | _E._timer@_stl.function = (_cast_func)_callback; | _E._timer@_stl.function = (_cast_func)&_callback; ) // callback(unsigned long arg) @change_callback_handle_cast depends on change_timer_function_usage@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; identifier _handle; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { ( ... when != _origarg _handletype *_handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg ) } // callback(unsigned long arg) without existing variable @change_callback_handle_cast_no_arg depends on change_timer_function_usage && !change_callback_handle_cast@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { + _handletype *_origarg = from_timer(_origarg, t, _timer); + ... when != _origarg - (_handletype *)_origarg + _origarg ... when != _origarg } // Avoid already converted callbacks. @match_callback_converted depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier t; @@ void _callback(struct timer_list *t) { ... } // callback(struct something *handle) @change_callback_handle_arg depends on change_timer_function_usage && !match_callback_converted && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; @@ void _callback( -_handletype *_handle +struct timer_list *t ) { + _handletype *_handle = from_timer(_handle, t, _timer); ... } // If change_callback_handle_arg ran on an empty function, remove // the added handler. @unchange_callback_handle_arg depends on change_timer_function_usage && change_callback_handle_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; identifier t; @@ void _callback(struct timer_list *t) { - _handletype *_handle = from_timer(_handle, t, _timer); } // We only want to refactor the setup_timer() data argument if we've found // the matching callback. This undoes changes in change_timer_function_usage. @unchange_timer_function_usage depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg && !change_callback_handle_arg@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type change_timer_function_usage._cast_data; @@ ( -timer_setup(&_E->_timer, _callback, 0); +setup_timer(&_E->_timer, _callback, (_cast_data)_E); | -timer_setup(&_E._timer, _callback, 0); +setup_timer(&_E._timer, _callback, (_cast_data)&_E); ) // If we fixed a callback from a .function assignment, fix the // assignment cast now. @change_timer_function_assignment depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_func; typedef TIMER_FUNC_TYPE; @@ ( _E->_timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -&_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)_callback; +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -&_callback; +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; ) // Sometimes timer functions are called directly. Replace matched args. @change_timer_function_calls depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression _E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_data; @@ _callback( ( -(_cast_data)_E +&_E->_timer | -(_cast_data)&_E +&_E._timer | -_E +&_E->_timer ) ) // If a timer has been configured without a data argument, it can be // converted without regard to the callback argument, since it is unused. @match_timer_function_unused_data@ expression _E; identifier _timer; identifier _callback; @@ ( -setup_timer(&_E->_timer, _callback, 0); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0L); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0UL); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0L); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0UL); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_timer, _callback, 0); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0L); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0UL); +timer_setup(&_timer, _callback, 0); | -setup_timer(_timer, _callback, 0); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0L); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0UL); +timer_setup(_timer, _callback, 0); ) @change_callback_unused_data depends on match_timer_function_unused_data@ identifier match_timer_function_unused_data._callback; type _origtype; identifier _origarg; @@ void _callback( -_origtype _origarg +struct timer_list *unused ) { ... when != _origarg } Signed-off-by: Kees Cook <keescook@chromium.org>
2017-09-08drivers/pps: use surrounding "if PPS" to remove numerous dependency checksRobert P. J. Day3-9/+8
Adding high-level "if PPS" makes lower-level dependency tests superfluous. Link: http://lkml.kernel.org/r/alpine.LFD.2.20.1708261050500.8156@localhost.localdomain Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Acked-by: Rodolfo Giometti <giometti@enneenne.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-18drivers: pps: Make PPS into a menuconfig to ease disablingVincent Legoll3-14/+7
So that there's no need to get into the submenu to disable all related config entries. The BROKEN PPS_GENERATOR_PARPORT now also depends on PPS Signed-off-by: Vincent Legoll <vincent.legoll@gmail.com> Acked-by: Rodolfo Giometti <giometti@enneenne.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-17pps: fix padding issue with PPS_FETCH for ioctl_compatMatt Ranostay1-31/+79
Issue is that x86 32-bit aligns to 4-bytes instead of 8-bytes so this patchset works around the issue and corrects the data returned in pps_fdata_compat. Acked-by: Rodolfo Giometti <giometti@enneenne.com> Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-17pps: add ioctl_compat function to correct ioctl definitionsMatt Ranostay1-0/+13
ioctl definitions use the pointer size of the architecture which is fine when userspace and kernel are the same bitsize. This patchset workarounds an issue with mixed bitsize kernel + userspace by rewriting the cmd to the kernelspace architecture pointer size. Acked-by: Rodolfo Giometti <giometti@enneenne.com> Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-11pps: kc: fix non-tickless system config dependencyMaciej S. Szmigiero1-1/+1
CONFIG_NO_HZ currently only sets the default value of dynticks config so if PPS kernel consumer needs periodic timer ticks it should depend on !CONFIG_NO_HZ_COMMON instead of !CONFIG_NO_HZ. Otherwise it is possible to enable it even on tickless system which has CONFIG_NO_HZ not set and CONFIG_NO_HZ_IDLE (or CONFIG_NO_HZ_FULL) set. Link: http://lkml.kernel.org/r/57E2B769.50202@maciej.szmigiero.name Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Acked-by: Rodolfo Giometti <giometti@enneenne.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-23pps: do not crash when failed to registerJiri Slaby1-1/+1
With this command sequence: modprobe plip modprobe pps_parport rmmod pps_parport the partport_pps modules causes this crash: BUG: unable to handle kernel NULL pointer dereference at (null) IP: parport_detach+0x1d/0x60 [pps_parport] Oops: 0000 [#1] SMP ... Call Trace: parport_unregister_driver+0x65/0xc0 [parport] SyS_delete_module+0x187/0x210 The sequence that builds up to this is: 1) plip is loaded and takes the parport device for exclusive use: plip0: Parallel port at 0x378, using IRQ 7. 2) pps_parport then fails to grab the device: pps_parport: parallel port PPS client parport0: cannot grant exclusive access for device pps_parport pps_parport: couldn't register with parport0 3) rmmod of pps_parport is then killed because it tries to access pardev->name, but pardev (taken from port->cad) is NULL. So add a check for NULL in the test there too. Link: http://lkml.kernel.org/r/20160714115245.12651-1-jslaby@suse.cz Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Rodolfo Giometti <giometti@enneenne.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-10-01ntp/pps: use y2038 safe types in pps_event_timeArnd Bergmann2-5/+3
The pps_event_time uses two 'timespec' structures internally, which suffer from the y2038 problem. The uses of this structure are fairly self-contained in the pps code, so this replaces them all at once. Unfortunately, this includes the sfc ethernet driver aside from the pps subsystem, so we change that one as well. Both touch the same data structure, and there probably is no good way to split the patch into smaller units. Acked-by: Richard Cochran <richardcochran@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: John Stultz <john.stultz@linaro.org>
2015-10-01ntp/pps: use timespec64 for hardpps()Arnd Bergmann1-1/+3
There is only one user of the hardpps function in the kernel, so it makes sense to atomically change it over to using 64-bit timestamps for y2038 safety. In the hardpps implementation, we also need to change the pps_normtime structure, which is similar to struct timespec and also requires a 64-bit seconds portion. This introduces two temporary variables in pps_kc_event() to do the conversion, they will be removed again in the next step, which seemed preferable to having a larger patch changing it all at the same time. Acked-by: Richard Cochran <richardcochran@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: John Stultz <john.stultz@linaro.org>
2014-10-20pps: clients: drop owner assignment from platform_driversWolfram Sang1-1/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-11-13drivers/pps/clients/pps-gpio.c: remove redundant of_match_ptrSachin Kamat1-1/+1
The data structure of_match_ptr() protects is always compiled in. Hence of_match_ptr() is not needed. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Rodolfo Giometti <giometti@enneenne.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-13Remove GENERIC_HARDIRQ config optionMartin Schwidefsky1-1/+1
After the last architecture switched to generic hard irqs the config options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code for !CONFIG_GENERIC_HARDIRQS can be removed. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-09-11drivers/pps/clients/pps-gpio.c: remove unnecessary platform_set_drvdata()Jingoo Han1-1/+0
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Rodolfo Giometti <giometti@enneenne.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-19PPS: convert class code to use dev_groupsGreg Kroah-Hartman2-21/+36
The dev_attrs field of struct class is going away soon, dev_groups should be used instead. This converts the pps class code to use the correct field. Cc: Rodolfo Giometti <giometti@enneenne.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-03pps-gpio: add device-tree binding and supportJan Luebbe1-54/+73
Instead of allocating a struct pps_gpio_platform_data in the DT case, store the necessary information in struct pps_gpio_device_data itself. This avoids an additional allocation and the ifdef. It also gets rid of some indirection. Also use dev_err instead of pr_err in the changed code. Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Rodolfo Giometti <giometti@enneenne.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03drivers/pps/clients/pps-gpio.c: convert to module_platform_driverJan Luebbe1-17/+1
This removes some boilerplate code (no functional changes). Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Acked-by: Rodolfo Giometti <giometti@enneenne.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03drivers/pps/clients/pps-gpio.c: convert to devm_* helpersJan Luebbe1-21/+7
Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Acked-by: Rodolfo Giometti <giometti@enneenne.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-01Merge branch 'for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull VFS updates from Al Viro, Misc cleanups all over the place, mainly wrt /proc interfaces (switch create_proc_entry to proc_create(), get rid of the deprecated create_proc_read_entry() in favor of using proc_create_data() and seq_file etc). 7kloc removed. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (204 commits) don't bother with deferred freeing of fdtables proc: Move non-public stuff from linux/proc_fs.h to fs/proc/internal.h proc: Make the PROC_I() and PDE() macros internal to procfs proc: Supply a function to remove a proc entry by PDE take cgroup_open() and cpuset_open() to fs/proc/base.c ppc: Clean up scanlog ppc: Clean up rtas_flash driver somewhat hostap: proc: Use remove_proc_subtree() drm: proc: Use remove_proc_subtree() drm: proc: Use minor->index to label things, not PDE->name drm: Constify drm_proc_list[] zoran: Don't print proc_dir_entry data in debug reiserfs: Don't access the proc_dir_entry in r_open(), r_start() r_show() proc: Supply an accessor for getting the data from a PDE's parent airo: Use remove_proc_subtree() rtl8192u: Don't need to save device proc dir PDE rtl8187se: Use a dir under /proc/net/r8180/ proc: Add proc_mkdir_data() proc: Move some bits from linux/proc_fs.h to linux/{of.h,signal.h,tty.h} proc: Move PDE_NET() to fs/proc/proc_net.c ...
2013-04-30pps: pps_kc_hardpps_lock can be staticFengguang Wu1-3/+3
drivers/pps/kc.c:37:1: sparse: symbol 'pps_kc_hardpps_lock' was not declared. Should it be static? drivers/pps/kc.c:39:19: sparse: symbol 'pps_kc_hardpps_dev' was not declared. Should it be static? drivers/pps/kc.c:40:5: sparse: symbol 'pps_kc_hardpps_mode' was not declared. Should it be static? Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Cc: Rodolfo Giometti <giometti@enneenne.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30pps: hide more configuration symbols behind CONFIG_PPSFlorian Fainelli1-2/+4
Make CONFIG_PPS_DEBUG and CONFIG_NTP_PPS be hidden if CONFIG_PPS is not selected, so that we are not prompted for these configuration options if CONFIG_PPS is not set. Signed-off-by: Florian Fainelli <florian@openwrt.org> Cc: Rodolfo Giometti <giometti@enneenne.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>