summaryrefslogtreecommitdiff
path: root/drivers/pci
AgeCommit message (Collapse)AuthorFilesLines
2009-12-15const: constify remaining dev_pm_opsAlexey Dobriyan1-1/+1
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-11Merge branch 'linux-next' of ↵Linus Torvalds37-968/+818
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (109 commits) PCI: fix coding style issue in pci_save_state() PCI: add pci_request_acs PCI: fix BUG_ON triggered by logical PCIe root port removal PCI: remove ifdefed pci_cleanup_aer_correct_error_status PCI: unconditionally clear AER uncorr status register during cleanup x86/PCI: claim SR-IOV BARs in pcibios_allocate_resource PCI: portdrv: remove redundant definitions PCI: portdrv: remove unnecessary struct pcie_port_data PCI: portdrv: minor cleanup for pcie_port_device_register PCI: portdrv: add missing irq cleanup PCI: portdrv: enable device before irq initialization PCI: portdrv: cleanup service irqs initialization PCI: portdrv: check capabilities first PCI: portdrv: move PME capability check PCI: portdrv: remove redundant pcie type calculation PCI: portdrv: cleanup pcie_device registration PCI: portdrv: remove redundant pcie_port_device_probe PCI: Always set prefetchable base/limit upper32 registers PCI: read-modify-write the pcie device control register when initiating pcie flr PCI: show dma_mask bits in /sys ... Fixed up conflicts in: arch/x86/kernel/amd_iommu_init.c drivers/pci/dmar.c drivers/pci/hotplug/acpiphp_glue.c
2009-12-09Merge branch 'acpica' of ↵Linus Torvalds3-13/+13
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'acpica' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPICA: Update version to 20091112. ACPICA: Add additional module-level code support ACPICA: Deploy new create integer interface where appropriate ACPICA: New internal utility function to create Integer objects ACPICA: Add repair for predefined methods that must return sorted lists ACPICA: Fix possible fault if return Package objects contain NULL elements ACPICA: Add post-order callback to acpi_walk_namespace ACPICA: Change package length error message to an info message ACPICA: Reduce severity of predefined repair messages, Warning to Info ACPICA: Update version to 20091013 ACPICA: Fix possible memory leak for Scope ASL operator ACPICA: Remove possibility of executing _REG methods twice ACPICA: Add repair for bad _MAT buffers ACPICA: Add repair for bad _BIF/_BIX packages
2009-12-08Merge branch 'timers-for-linus-hpet' of ↵Linus Torvalds2-4/+92
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-for-linus-hpet' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: hpet: Make WARN_ON understandable x86: arch specific support for remapping HPET MSIs intr-remap: generic support for remapping HPET MSIs x86, hpet: Simplify the HPET code x86, hpet: Disable per-cpu hpet timer if ARAT is supported
2009-12-05Merge branch 'core-iommu-for-linus' of ↵Linus Torvalds2-4/+9
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (63 commits) x86, Calgary IOMMU quirk: Find nearest matching Calgary while walking up the PCI tree x86/amd-iommu: Remove amd_iommu_pd_table x86/amd-iommu: Move reset_iommu_command_buffer out of locked code x86/amd-iommu: Cleanup DTE flushing code x86/amd-iommu: Introduce iommu_flush_device() function x86/amd-iommu: Cleanup attach/detach_device code x86/amd-iommu: Keep devices per domain in a list x86/amd-iommu: Add device bind reference counting x86/amd-iommu: Use dev->arch->iommu to store iommu related information x86/amd-iommu: Remove support for domain sharing x86/amd-iommu: Rearrange dma_ops related functions x86/amd-iommu: Move some pte allocation functions in the right section x86/amd-iommu: Remove iommu parameter from dma_ops_domain_alloc x86/amd-iommu: Use get_device_id and check_device where appropriate x86/amd-iommu: Move find_protection_domain to helper functions x86/amd-iommu: Simplify get_device_resources() x86/amd-iommu: Let domain_for_device handle aliases x86/amd-iommu: Remove iommu specific handling from dma_ops path x86/amd-iommu: Remove iommu parameter from __(un)map_single x86/amd-iommu: Make alloc_new_range aware of multiple IOMMUs ...
2009-12-04PCI: fix coding style issue in pci_save_state()Kleber Sacilotto de Souza1-1/+1
Remove a stray space in pci_save_state(). Signed-off-by: Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04PCI: add pci_request_acsChris Wright3-5/+18
Commit ae21ee65e8bc228416bbcc8a1da01c56a847a60c "PCI: acs p2p upsteram forwarding enabling" doesn't actually enable ACS. Add a function to pci core to allow an IOMMU to request that ACS be enabled. The existing mechanism of using iommu_found() in the pci core to know when ACS should be enabled doesn't actually work due to initialization order; iommu has only been detected not initialized. Have Intel and AMD IOMMUs request ACS, and Xen does as well during early init of dom0. Cc: Allen Kay <allen.m.kay@intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04PCI: fix BUG_ON triggered by logical PCIe root port removalKenji Kaneshige1-2/+4
This problem happened when removing PCIe root port using PCI logical hotplug operation. The immediate cause of this problem is that the pointer to invalid data structure is passed to pcie_update_aspm_capable() by pcie_aspm_exit_link_state(). When pcie_aspm_exit_link_state() received a pointer to root port link, it unconfigures the root port link and frees its data structure at first. At this point, there are not links to configure under the root port and the data structure for root port link is already freed. So pcie_aspm_exit_link_state() must not call pcie_update_aspm_capable() and pcie_config_aspm_path(). This patch fixes the problem by changing pcie_aspm_exit_link_state() not to call pcie_update_aspm_capable() and pcie_config_aspm_path() if the specified link is root port link. ------------[ cut here ]------------ kernel BUG at drivers/pci/pcie/aspm.c:606! invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC last sysfs file: /sys/devices/pci0000:40/0000:40:13.0/remove CPU 1 Modules linked in: shpchp Pid: 9345, comm: sysfsd Not tainted 2.6.32-rc5 #98 ProLiant DL785 G6 RIP: 0010:[<ffffffff811df69b>] [<ffffffff811df69b>] pcie_update_aspm_capable+0x15/0xbe RSP: 0018:ffff88082a2f5ca0 EFLAGS: 00010202 RAX: 0000000000000e77 RBX: ffff88182cc3e000 RCX: ffff88082a33d006 RDX: 0000000000000001 RSI: ffffffff811dff4a RDI: ffff88182cc3e000 RBP: ffff88082a2f5cc0 R08: ffff88182cc3e000 R09: 0000000000000000 R10: ffff88182fc00180 R11: ffff88182fc00198 R12: ffff88182cc3e000 R13: 0000000000000000 R14: ffff88182cc3e000 R15: ffff88082a2f5e20 FS: 00007f259a64b6f0(0000) GS:ffff880864600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 00007feb53f73da0 CR3: 000000102cc94000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process sysfsd (pid: 9345, threadinfo ffff88082a2f4000, task ffff88082a33cf00) Stack: ffff88182cc3e000 ffff88182cc3e000 0000000000000000 ffff88082a33cf00 <0> ffff88082a2f5cf0 ffffffff811dff52 ffff88082a2f5cf0 ffff88082c525168 <0> ffff88402c9fd2f8 ffff88402c9fd2f8 ffff88082a2f5d20 ffffffff811d7db2 Call Trace: [<ffffffff811dff52>] pcie_aspm_exit_link_state+0xf5/0x11e [<ffffffff811d7db2>] pci_stop_bus_device+0x76/0x7e [<ffffffff811d7d67>] pci_stop_bus_device+0x2b/0x7e [<ffffffff811d7e4f>] pci_remove_bus_device+0x15/0xb9 [<ffffffff811dcb8c>] remove_callback+0x29/0x3a [<ffffffff81135aeb>] sysfs_schedule_callback_work+0x15/0x6d [<ffffffff81072790>] worker_thread+0x19d/0x298 [<ffffffff8107273b>] ? worker_thread+0x148/0x298 [<ffffffff81135ad6>] ? sysfs_schedule_callback_work+0x0/0x6d [<ffffffff810765c0>] ? autoremove_wake_function+0x0/0x38 [<ffffffff810725f3>] ? worker_thread+0x0/0x298 [<ffffffff8107629e>] kthread+0x7d/0x85 [<ffffffff8102eafa>] child_rip+0xa/0x20 [<ffffffff8102e4bc>] ? restore_args+0x0/0x30 [<ffffffff81076221>] ? kthread+0x0/0x85 [<ffffffff8102eaf0>] ? child_rip+0x0/0x20 Code: 89 e5 8a 50 48 31 c0 c0 ea 03 83 e2 07 e8 b2 de fe ff c9 48 98 c3 55 48 89 e5 41 56 49 89 fe 41 55 41 54 53 48 83 7f 10 00 74 04 <0f> 0b eb fe 48 8b 05 da 7d 63 00 4c 8d 60 e8 4c 89 e1 eb 24 4c RIP [<ffffffff811df69b>] pcie_update_aspm_capable+0x15/0xbe RSP <ffff88082a2f5ca0> ---[ end trace 6ae0f65bdeab8555 ]--- Reported-by: Alex Chiang <achiang@hp.com> Tested-by: Alex Chiang <achiang@hp.com> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04PCI: remove ifdefed pci_cleanup_aer_correct_error_statusAndrew Patterson1-17/+0
The pci_cleanup_aer_correct_error_status() function has been #if 0'd out since 2.6.25. Time to remove the dead code. Signed-off-by: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04PCI: unconditionally clear AER uncorr status register during cleanupAndrew Patterson1-7/+3
The current implementation of pci_cleanup_aer_uncorrect_error_status only clears either fatal or non-fatal error status bits depending on the state of the I/O channel. This implementation will then often leave some bits set after PCI error recovery completes. The uncleared bit settings will then be falsely reported the next time an AER interrupt is generated for that hierarchy. An easy way to illustrate this issue is to use the aer-inject module to simultaneously inject both an uncorrectable non-fatal and uncorrectable fatal error. One of the errors will not be cleared. This patch resolves this issue by unconditionally clearing all bits in the AER uncorrectable status register. All settings and corrective action strategies are saved and determined before pci_cleanup_aer_uncorrect_error_status is called, so this change should not affect errory handling functionality. Signed-off-by: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04PCI: portdrv: remove redundant definitionsKenji Kaneshige2-24/+9
Remove unnecessary definitions from portdrv.h and use generic definitions instead. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04PCI: portdrv: remove unnecessary struct pcie_port_dataKenji Kaneshige4-26/+9
Remove 'port_type' field in struct pcie_port_data(), because we can get port type information from struct pci_dev. With this change, this patch also does followings: - Remove struct pcie_port_data because it no longer has any field. - Remove portdrv private definitions about port type (PCIE_RC_PORT, PCIE_SW_UPSTREAM_PORT and PCIE_SW_DOWNSTREAM_PORT), and use generic definitions instead. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04PCI: portdrv: minor cleanup for pcie_port_device_registerKenji Kaneshige1-11/+10
Minor cleanups for pcie_port_device_register(). Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04PCI: portdrv: add missing irq cleanupKenji Kaneshige1-7/+12
Add missing service irqs cleanup in the error code path of pcie_port_device_register(). Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04PCI: portdrv: enable device before irq initializationKenji Kaneshige1-10/+11
Call pci_enable_device() before initializing service irqs, because legacy interrupt is initialized in pci_enable_device() on some architectures. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04PCI: portdrv: cleanup service irqs initializationKenji Kaneshige1-42/+29
This patch cleans up the service irqs initialization as follows: - Remove 'irq_mode' field in pcie_port_data and related definitions, which is not needed because we can get the same information from 'is_msix', 'is_msi' and 'pin' fields in struct pci_dev. - Change the name of 'vectors' argument of assign_interrupt_mode() to 'irqs' because it holds irq numbers actually. People might confuse it with CPU vector or MSI/MSI-X vector. - Change function name assign_interrupt_mode() to init_service_irqs() becasuse we no longer have 'irq_mode' data structure, and new name is more straightforward (IMO). Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04PCI: portdrv: check capabilities firstKenji Kaneshige1-2/+4
Move capability check capability to the beginning of pcie_port_device_register() prevents redundant execution path. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04PCI: portdrv: move PME capability checkKenji Kaneshige1-3/+3
No reason to check PME capability outside get_port_device_capability(). Do it in get_port_device_capability(). Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04PCI: portdrv: remove redundant pcie type calculationKenji Kaneshige1-6/+2
PCIe port type is already stored in 'pcie_type' field of struct pci_dev. So we don't need to get it from pci configuration space. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04PCI: portdrv: cleanup pcie_device registrationKenji Kaneshige1-51/+26
In the current port bus driver implementation, pcie_device allocation, initialization and registration are done in separated functions. Doing those in one function make the code simple and easier to read. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04PCI: portdrv: remove redundant pcie_port_device_probeKenji Kaneshige3-29/+8
We don't need pcie_port_device_probe() because we can get pci device/port type using pci_is_pcie() and 'pcie_type' fields in struct pci_dev. Remove pcie_port_device_probe(). Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04PCI: Always set prefetchable base/limit upper32 registersAlex Williamson1-8/+3
Prior to 1f82de10 we always initialized the upper 32bits of the prefetchable memory window, regardless of the address range used. Now we only touch it for a >32bit address, which means the upper32 registers remain whatever the BIOS initialized them too. It's valid for the BIOS to set the upper32 base/limit to 0xffffffff/0x00000000, which makes us program prefetchable ranges like 0xffffffffabc00000 - 0x00000000abc00000 Revert the chunk of 1f82de10 that made this conditional so we always write the upper32 registers and remove now unused pref_mem64 variable. Signed-off-by: Alex Williamson <alex.williamson@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04PCI: read-modify-write the pcie device control register when initiating pcie flrShmulik Ravid1-3/+5
The pcie_flr routine writes the device control register with the FLR bit set clearing all other fields for the FLR duration. Among other fields, the Max_Payload_Size is also cleared which can cause errors if there are transactions lurking in the HW pipeline. The patch replaces the blank write with read-modify-write of the control register keeping the other fields intact. Signed-off-by: Shmulik Ravid <shmulikr@broadcom.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04PCI: show dma_mask bits in /sysYinghai Lu1-0/+17
So we can catch if the driver sets an incorrect dma_mask. Reviewed-by: Grant Grundler <grundler@google.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04PCI: add debug output for DMA mask infoYinghai Lu1-0/+2
This allows us to find out what DMA mask is used for each PCI device at boot time; useful for debugging. After the patch: ehci_hcd 0000:00:02.1: using 31bit consistent DMA mask e1000 0000:0b:01.0: using 64bit DMA mask e1000 0000:0b:01.0: using 64bit consistent DMA mask e1000e 0000:04:00.0: using 64bit DMA mask e1000e 0000:04:00.0: using 64bit consistent DMA mask ixgb 0000:0c:01.0: using 64bit DMA mask ixgb 0000:0c:01.0: using 64bit consistent DMA mask aacraid 0000:86:00.0: using 32bit DMA mask aacraid 0000:86:00.0: using 32bit consistent DMA mask aacraid 0000:86:00.0: using 64bit DMA mask aacraid 0000:86:00.0: using 64bit consistent DMA mask qla2xxx 0000:0c:02.0: using 64bit consistent DMA mask qla2xxx 0000:0c:02.1: using 64bit consistent DMA mask lpfc 0000:06:00.0: using 64bit DMA mask lpfc 0000:06:00.1: using 64bit DMA mask pata_amd 0000:00:06.0: using 32bit DMA mask pata_amd 0000:00:06.0: using 32bit consistent DMA mask mptsas 0000:0c:04.0: using 64bit DMA mask mptsas 0000:0c:04.0: using 64bit consistent DMA mask forcedeth 0000:00:08.0: using 39bit DMA mask forcedeth 0000:00:08.0: using 39bit consistent DMA mask niu 0000:02:00.0: using 44bit DMA mask niu 0000:02:00.0: using 44bit consistent DMA mask sata_nv 0000:00:05.0: using 32bit DMA mask sata_nv 0000:00:05.0: using 32bit consistent DMA mask ib_mthca 0000:03:00.0: using 64bit DMA mask ib_mthca 0000:03:00.0: using 64bit consistent DMA mask Reviewed-by: Grant Grundler <grundler@google.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-04PCI: ibmphp_hpc: don't release hw sem twice if kthread stopsJesse Barnes1-1/+2
If we stop the kthread, we may end up up'ing the sem twice, which seems unintended. Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-11-24ACPICA: Add post-order callback to acpi_walk_namespaceLin Ming3-13/+13
The existing interface only has a pre-order callback. This change adds an additional parameter for a post-order callback which will be more useful for bus scans. ACPICA BZ 779. Also update the external calls to acpi_walk_namespace. http://www.acpica.org/bugzilla/show_bug.cgi?id=779 Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-11-24PCI pciehp: fix power fault interrupt storm problemKenji Kaneshige2-36/+17
Enabling power fault detected event notification in current pciehp might cause power fault interrupt storm on some machines. On those machines. On those machines, power fault detected bit in the slot status register was set again immediately when it is cleared in the interrupt service routine, and next power fault detected interrupt was notified again. Therefore, disable power fault detected event notification for now. This patch also removes unnecessary handling for power fault cleared event because this event is not supported by PCIe spec. Tested-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-11-24PCI hotplug: use pci_is_pcie()Kenji Kaneshige1-1/+1
Change for PCI hotplug to use pci_is_pcie() instead of checking pci_dev->is_pcie. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-11-24PCIe AER: use pci_is_pcie()Kenji Kaneshige2-3/+3
Changes for PCIe AER driver to use pci_is_pcie() instead of checking pci_dev->is_pcie. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-11-24PCIe ASPM: use pci_is_pcie()Kenji Kaneshige1-9/+12
Change for PCIe ASPM driver to use pci_is_pcie() instead of checking pci_dev->is_pcie. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-11-24PCI: use pci_is_pcie() in pci coreKenji Kaneshige7-16/+16
Change for PCI core to use pci_is_pcie() instead of checking pci_dev->is_pcie. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-11-24pciehp: use pci_pcie_cap()Kenji Kaneshige3-25/+25
Use pci_pcie_cap() instead of pci_find_capability() to get PCIe capability offset in pciehp driver. This avoids unnecessary search in PCI configuration space. This patch also removes 'cap_base' field in struct controller, that was used to hold PCIe capability offset by pciehp itself. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-11-24PCI hotplug: use pci_pcie_cap()Kenji Kaneshige1-1/+1
Use pci_pcie_cap() instead of pci_find_capability() to get PCIe capability offset in PCI hotplug core. This avoids unnecessary search in PCI configuration space. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-11-24PCIe ASPM: use pci_pcie_cap()Kenji Kaneshige1-10/+10
Use pci_pcie_cap() instead of pci_find_capability() to get PCIe capability offset in PCIe ASPM driver. This avoids unnecessary search in PCI configuration space. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-11-24PCIe port bus: use pci_pcie_cap()Kenji Kaneshige1-7/+7
Use pci_pcie_cap() instead of pci_find_capability() to get PCIe capability offset in PCI Express Port Bus driver. This avoids unnecessary serarch in PCI configuration space. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-11-24PCIe AER: use pci_pcie_cap()Kenji Kaneshige2-5/+5
Use pcie_cap() instead of pci_find_capability() to get PCIe capability offset in PCIe AER driver. This avoids unnecessary search in PCI configuration space. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-11-24PCI: use pci_pcie_cap() in pci coreKenji Kaneshige2-8/+8
Use pcie_cap() instead of pci_find_capability() to get PCIe capability offset in PCI core code. This avoids unnecessary search in PCI configuration space. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-11-19Fix handling of the HP/Acer 'DMAR at zero' BIOS error for machines with ↵David Woodhouse1-0/+3
<4GiB RAM. Commit 86cf898e1d0fca245173980e3897580db38569a8 ("intel-iommu: Check for 'DMAR at zero' BIOS error earlier.") was supposed to work by pretending not to detect an IOMMU if it was actually being reported by the BIOS at physical address zero. However, the intel_iommu_init() function is called unconditionally, as are the corresponding functions for other IOMMU hardware. So the patch only worked if you have RAM above the 4GiB boundary. It caused swiotlb to be initialised when no IOMMU was detected during early boot, and thus the later IOMMU init would refuse to run. But if you have less RAM than that, swiotlb wouldn't get set up and the IOMMU _would_ still end up being initialised, even though we never claimed to detect it. This patch also sets the dmar_disabled flag when the error is detected during the initial detection phase -- so that the later call to intel_iommu_init() will return without doing anything, regardless of whether swiotlb is used or not. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-11-17Merge commit 'v2.6.32-rc7' into core/iommuIngo Molnar1-2/+4
Merge reason: Add fixes we'll depend on. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-14Merge git://git.infradead.org/users/dwmw2/iommu-2.6.32Linus Torvalds2-11/+77
* git://git.infradead.org/users/dwmw2/iommu-2.6.32: intel-iommu: Support PCIe hot-plug intel-iommu: Obey coherent_dma_mask for alloc_coherent on passthrough intel-iommu: Check for 'DMAR at zero' BIOS error earlier.
2009-11-12intel-iommu: Support PCIe hot-plugFenghua Yu1-0/+29
To support PCIe hot plug in IOMMU, we register a notifier to respond to device change action. When the notifier gets BUS_NOTIFY_UNBOUND_DRIVER, it removes the device from its DMAR domain. A hot added device will be added into an IOMMU domain when it first does IOMMU op. So there is no need to add more code for hot add. Without the patch, after a hot-remove, a hot-added device on the same slot will not work. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Tested-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-11-12intel-iommu: Obey coherent_dma_mask for alloc_coherent on passthroughAlex Williamson1-1/+9
The model for IOMMU passthrough is that decent devices that can cope with DMA to all of memory get passthrough; crappy devices with a limited dma_mask don't -- they get to use the IOMMU anyway. This is done on the basis that IOMMU passthrough is usually wanted for performance reasons, and it's only the decent PCI devices that you really care about performance for, while the crappy 32-bit ones like your USB controller can just use the IOMMU and you won't really care. Unfortunately, the check for this was only looking at dev->dma_mask, not at dev->coherent_dma_mask. And some devices have a 32-bit coherent_dma_mask even though they have a full 64-bit dma_mask. Even more unfortunately, fixing that simple oversight would upset certain broken HP devices. Not only do they have a 32-bit coherent_dma_mask, but they also have a tendency to do stray DMA to unmapped addresses. And then they die when they take the DMA fault they so richly deserve. So if we do the 'correct' fix, it'll mean that affected users have to disable IOMMU support completely on "a large percentage of servers from a major vendor." Personally, I have little sympathy -- given that this is the _same_ 'major vendor' who is shipping machines which claim to have IOMMU support but have obviously never _once_ booted a VT-d capable OS to do any form of QA. But strictly speaking, it _would_ be a regression even though it only ever worked by fluke. For 2.6.33, we'll come up with a quirk which gives swiotlb support for this particular device, and other devices with an inadequate coherent_dma_mask will just get normal IOMMU mapping. The simplest fix for 2.6.32, though, is just to jump through some hoops to try to allocate coherent DMA memory for such devices in a place that they can reach. We'd use dma_generic_alloc_coherent() for this if it existed on IA64. Signed-off-by: Alex Williamson <alex.williamson@hp.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-11-11PCI: allow matching of prefetchable resources to non-prefetchable windowsLinus Torvalds1-2/+6
I'm not entirely sure it needs to go into 32, but it's probably the right thing to do. Another way of explaining the patch is: - we currently pick the _first_ exactly matching bus resource entry, but the _last_ inexactly matching one. Normally first/last shouldn't matter, but bus resource entries aren't actually all created equal: in a transparent bus, the last resources will be the parent resources, which we should generally try to avoid unless we have no choice. So "first matching" is the thing we should always aim for. - the patch is a bit bigger than it needs to be, because I simplified the logic at the same time. It used to be a fairly incomprehensible if ((res->flags & IORESOURCE_PREFETCH) && !(r->flags & IORESOURCE_PREFETCH)) best = r; /* Approximating prefetchable by non-prefetchable */ and technically, all the patch did was to make that complex choice be even more complex (it basically added a "&& !best" to say that if we already gound a non-prefetchable window for the prefetchable resource, then we won't override an earlier one with that later one: remember "first matching"). - So instead of that complex one with three separate conditionals in one, I split it up a bit, and am taking advantage of the fact that we already handled the exact case, so if 'res->flags' has the PREFETCH bit, then we already know that 'r->flags' will _not_ have it. So the simplified code drops the redundant test, and does the new '!best' test separately. It also uses 'continue' as a way to ignore the bus resource we know doesn't work (ie a prefetchable bus resource is _not_ acceptable for anything but an exact match), so it turns into: /* We can't insert a non-prefetch resource inside a prefetchable parent .. */ if (r->flags & IORESOURCE_PREFETCH) continue; /* .. but we can put a prefetchable resource inside a non-prefetchable one */ if (!best) best = r; instead. With the comments, it's now six lines instead of two, but it's conceptually simpler, and I _could_ have written it as two lines: if ((res->flags & IORESOURCE_PREFETCH) && !best) best = r; /* Approximating prefetchable by non-prefetchable */ but I thought that was too damn subtle. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-11-10x86: Handle HW IOMMU initialization failure gracefullyFUJITA Tomonori2-4/+5
If HW IOMMU initialization fails (Intel VT-d often does this, typically due to BIOS bugs), we fall back to nommu. It doesn't work for the majority since nowadays we have more than 4GB memory so we must use swiotlb instead of nommu. The problem is that it's too late to initialize swiotlb when HW IOMMU initialization fails. We need to allocate swiotlb memory earlier from bootmem allocator. Chris explained the issue in detail: http://marc.info/?l=linux-kernel&m=125657444317079&w=2 The current x86 IOMMU initialization sequence is too complicated and handling the above issue makes it more hacky. This patch changes x86 IOMMU initialization sequence to handle the above issue cleanly. The new x86 IOMMU initialization sequence are: 1. we initialize the swiotlb (and setting swiotlb to 1) in the case of (max_pfn > MAX_DMA32_PFN && !no_iommu). dma_ops is set to swiotlb_dma_ops or nommu_dma_ops. if swiotlb usage is forced by the boot option, we finish here. 2. we call the detection functions of all the IOMMUs 3. the detection function sets x86_init.iommu.iommu_init to the IOMMU initialization function (so we can avoid calling the initialization functions of all the IOMMUs needlessly). 4. if the IOMMU initialization function doesn't need to swiotlb then sets swiotlb to zero (e.g. the initialization is sucessful). 5. if we find that swiotlb is set to zero, we free swiotlb resource. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: chrisw@sous-sol.org Cc: dwmw2@infradead.org Cc: joerg.roedel@amd.com Cc: muli@il.ibm.com LKML-Reference: <1257849980-22640-10-git-send-email-fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-10x86: intel-iommu: Convert detect_intel_iommu to use iommu_init hookFUJITA Tomonori1-0/+4
This changes detect_intel_iommu() to set intel_iommu_init() to iommu_init hook if detect_intel_iommu() finds the IOMMU. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: chrisw@sous-sol.org Cc: dwmw2@infradead.org Cc: joerg.roedel@amd.com Cc: muli@il.ibm.com LKML-Reference: <1257849980-22640-6-git-send-email-fujita.tomonori@lab.ntt.co.jp> [ -v2: build fix for the !CONFIG_DMAR case ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-09intel-iommu: Check for 'DMAR at zero' BIOS error earlier.David Woodhouse1-10/+39
Chris Wright has some patches which let us fall back to swiotlb nicely if IOMMU initialisation fails. But those are a bit much for 2.6.32. Instead, let's shift the check for the biggest problem, the HP and Acer BIOS bug which reports a DMAR at physical address zero. That one can actually be checked much earlier -- before we even admit to having detected an IOMMU in the first place. So the swiotlb init goes ahead as we want. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-11-06PCI: Replace old style lock initializerThomas Gleixner1-1/+1
SPIN_LOCK_UNLOCKED is deprecated. Use DEFINE_SPINLOCK instead. Make the lock static while at it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-11-06PCI hotplug: fix oshp evaluationKenji Kaneshige1-2/+3
If firmware doesn't grant over native hotplug control through ACPI _OSC method, we must not evaluate OSHP. Acked-by: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-11-06PCI: derive nearby CPUs from device's instead of bus' NUMA informationAndreas Herrmann1-0/+8
In case of AMD CPU northbridge functions this NUMA information might differ. Here is an example from a 4-socket system. Currently Linux shows root@hagen:/sys/devices/pci0000:00/0000:00:1a.4# cat numa_node 0 root@hagen:/sys/devices/pci0000:00/0000:00:1a.4# cat local_cpu* 0-3 00000000,0000000f which is not correct for northbridge functions as the local CPUs are those of the same socket. With this patch and a quirk for AMD CPU NB functions Linux can do better and correctly show root@hagen:/sys/devices/pci0000:00/0000:00:1a.4# cat numa_node 2 root@hagen:/sys/devices/pci0000:00/0000:00:1a.4# cat local_cpu* 8-11 00000000,00000f00 Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-25 01:56:07 +0000