summaryrefslogtreecommitdiff
path: root/drivers/pci/quirks.c
AgeCommit message (Collapse)AuthorFilesLines
2022-09-27PCI/DPC: Quirk PIO log size for certain Intel Root PortsMika Westerberg1-0/+36
Some Root Ports on Intel Tiger Lake and Alder Lake systems support the RP Extensions for DPC and the RP PIO Log registers but incorrectly advertise an RP PIO Log Size of zero. This means the kernel complains that: DPC: RP PIO log size 0 is invalid and if DPC is triggered, the DPC driver will not dump the RP PIO Log registers when it should. This is caused by a BIOS bug and should be fixed the BIOS for future CPUs. Add a quirk to set the correct RP PIO Log size for the affected Root Ports. Link: https://bugzilla.kernel.org/show_bug.cgi?id=209943 Link: https://lore.kernel.org/r/20220816102042.69125-1-mika.westerberg@linux.intel.com Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
2022-08-04Merge branch 'pci/header-cleanup-immutable'Bjorn Helgaas1-1/+3
- Remove pci_get_legacy_ide_irq(); use ATA_PRIMARY_IRQ() and ATA_SECONDARY_IRQ() instead (Stafford Horne) - Remove isa_dma_bridge_buggy, except for x86_32, the only place it's used (Stafford Horne) - Define ARCH_GENERIC_PCI_MMAP_RESOURCE for csky (Stafford Horne) - Move common PCI definitions that arches sometimes override to asm-generic/pci.h (Stafford Horne) - Include <linux/isa-dma.h> for 'isa_dma_bridge_buggy' when needed (bisection hole here) (Randy Dunlap) * pci/header-cleanup-immutable: PCI: Stub __pci_ioport_map() for arches that don't support it at all x86/cyrix: include header linux/isa-dma.h asm-generic: Add new pci.h and use it csky: PCI: Define ARCH_GENERIC_PCI_MMAP_RESOURCE PCI: Move isa_dma_bridge_buggy out of asm/dma.h PCI: Remove pci_get_legacy_ide_irq() and asm-generic/pci.h
2022-08-04Merge branch 'pci/ctrl/tegra194'Bjorn Helgaas1-4/+13
- Fix tegra_pcie_config_ep() power management in error path (Miaoqian Lin) - Convert DT binding to json-schema (Vidya Sagar) - Add DT bindings and driver support for Tegra234 Root Port and Endpoint mode (Vidya Sagar) - Disable MSI for Tegra234 Root Ports so they use INTx for all events (PCIe doesn't allow mixing INTx and MSI/MSI-X) (Vidya Sagar) - Search for Vendor-Specific RAS-DEC capability instead of hard-coding offset (Vidya Sagar) - Fix unintentional APPL_INTR_STATUS_L0 value overwrite in Root Port interrupt handling (Vidya Sagar) - Clear Bandwidth Management interrupt status bit to avoid interrupt storm (Vidya Sagar) - Set default Max Payload Size to 256 bytes (Vidya Sagar) - Fix offset when clearing bit in Data Link Feature capability (Vidya Sagar) - Extend Endpoint mode support to devices beyond Controller-5 (Vidya Sagar) * pci/ctrl/tegra194: PCI: tegra194: Add Tegra234 PCIe support PCI: tegra194: Extend Endpoint mode support PCI: tegra194: Fix link up retry sequence PCI: tegra194: Clean up the exit path for Endpoint mode PCI: tegra194: Enable support for 256 Byte payload PCI: tegra194: Clear bandwidth management status PCI: tegra194: Fix Root Port interrupt handling PCI: tegra194: Find RAS DES PCIe capability offset Revert "PCI: tegra194: Rename tegra_pcie_dw to tegra194_pcie" PCI: Disable MSI for Tegra234 Root Ports dt-bindings: PCI: tegra234: Add schema for tegra234 Endpoint mode dt-bindings: PCI: tegra234: Add schema for tegra234 Root Port mode dt-bindings: PCI: tegra194: Convert to json-schema PCI: tegra194: Fix PM error handling in tegra_pcie_config_ep() # Conflicts: # drivers/pci/controller/dwc/pcie-designware.h # drivers/pci/controller/dwc/pcie-tegra194.c
2022-07-22PCI: Move isa_dma_bridge_buggy out of asm/dma.hStafford Horne1-1/+3
The isa_dma_bridge_buggy symbol is only used for x86_32, and only x86_32 platforms or quirks ever set it. Add a new linux/isa-dma.h header that #defines isa_dma_bridge_buggy to 0 except on x86_32, where we keep it as a variable, and remove all the arch- specific definitions. [bhelgaas: commit log] Suggested-by: Arnd Bergmann <arnd@arndb.de> Suggested-by: Christoph Hellwig <hch@infradead.org> Link: https://lore.kernel.org/r/20220722214944.831438-3-shorne@gmail.com Signed-off-by: Stafford Horne <shorne@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
2022-07-22PCI: Disable MSI for Tegra234 Root PortsVidya Sagar1-4/+13
Tegra234 PCIe Root Ports don't generate MSI interrupts for PME and AER events. Since PCIe spec (r6.0 sec 6.1.4.3) doesn't support using a mix of INTx and MSI/MSI-X, MSI needs to be disabled to avoid Root Port service drivers registering their respective ISRs with MSI interrupt and to let only INTx be used for all events. Link: https://lore.kernel.org/r/20220721142052.25971-8-vidyas@nvidia.com Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-06-09PCI: Add ACS quirk for Broadcom BCM5750x NICsPavan Chebbi1-0/+3
The Broadcom BCM5750x NICs may be multi-function devices. They do not advertise ACS capability. Peer-to-peer transactions are not possible between the individual functions, so it is safe to treat them as fully isolated. Add an ACS quirk for these devices so the functions can be in independent IOMMU groups and attached individually to userspace applications using VFIO. Link: https://lore.kernel.org/r/1654796507-28610-1-git-send-email-michael.chan@broadcom.com Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-04-07PCI/ASPM: Make Intel DG2 L1 acceptable latency unlimitedMika Westerberg1-0/+47
Intel DG2 discrete graphics PCIe endpoints advertise L1 acceptable exit latency to be < 1us even though they can actually tolerate unlimited exit latencies just fine. Quirk the L1 acceptable exit latency for these endpoints to be unlimited so ASPM L1 can be enabled. [bhelgaas: use FIELD_GET/FIELD_PREP, wordsmith comment & commit log] Link: https://lore.kernel.org/r/20220405093810.76613-1-mika.westerberg@linux.intel.com Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2022-03-25Merge tag 'pci-v5.18-changes' of ↵Linus Torvalds1-0/+12
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Move the VGA arbiter from drivers/gpu to drivers/pci because it's PCI-specific, not GPU-specific (Bjorn Helgaas) - Select the default VGA device consistently whether it's enumerated before or after VGA arbiter init, which fixes arches that enumerate PCI devices late (Huacai Chen) Resource management: - Support BAR sizes up to 8TB (Dongdong Liu) PCIe native device hotplug: - Fix "Command Completed" tracking to avoid spurious timouts when powering off empty slots (Liguang Zhang) - Quirk Qualcomm devices that don't implement Command Completed correctly, again to avoid spurious timeouts (Manivannan Sadhasivam) Peer-to-peer DMA: - Add Intel 3rd Gen Intel Xeon Scalable Processors to whitelist (Michael J. Ruhl) APM X-Gene PCIe controller driver: - Revert generic DT parsing changes that broke some machines in the field (Marc Zyngier) Freescale i.MX6 PCIe controller driver: - Allow controller probe to succeed even when no devices currently present to allow hot-add later (Fabio Estevam) - Enable power management on i.MX6QP (Richard Zhu) - Assert CLKREQ# on i.MX8MM so enumeration doesn't hang when no device is connected (Richard Zhu) Marvell Aardvark PCIe controller driver: - Fix MSI and MSI-X support (Marek Behún, Pali Rohár) - Add support for ERR and PME interrupts (Pali Rohár) Marvell MVEBU PCIe controller driver: - Add DT binding and support for "num-lanes" (Pali Rohár) - Add support for INTx interrupts (Pali Rohár) Microsoft Hyper-V host bridge driver: - Avoid unnecessary hypercalls when unmasking IRQs on ARM64 (Boqun Feng) Qualcomm PCIe controller driver: - Add SM8450 DT binding and driver support (Dmitry Baryshkov) Renesas R-Car PCIe controller driver: - Help the controller get to the L1 state since the hardware can't do it on its own (Marek Vasut) - Return PCI_ERROR_RESPONSE (~0) for reads that fail on PCIe (Marek Vasut) SiFive FU740 PCIe controller driver: - Drop redundant '-gpios' from DT GPIO lookup (Ben Dooks) - Force 2.5GT/s for initial device probe (Ben Dooks) Socionext UniPhier Pro5 controller driver: - Add NX1 DT binding and driver support (Kunihiko Hayashi) Synopsys DesignWare PCIe controller driver: - Restore MSI configuration so MSI works after resume (Jisheng Zhang)" * tag 'pci-v5.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (94 commits) x86/PCI: Add #includes to asm/pci_x86.h PCI: ibmphp: Remove unused assignments PCI: cpqphp: Remove unused assignments PCI: fu740: Remove unused assignments PCI: kirin: Remove unused assignments PCI: Remove unused assignments PCI: Declare pci_filp_private only when HAVE_PCI_MMAP PCI: Avoid broken MSI on SB600 USB devices PCI: fu740: Force 2.5GT/s for initial device probe PCI: xgene: Revert "PCI: xgene: Fix IB window setup" PCI: xgene: Revert "PCI: xgene: Use inbound resources for setup" PCI: imx6: Assert i.MX8MM CLKREQ# even if no device present PCI: imx6: Invoke the PHY exit function after PHY power off PCI: rcar: Use PCI_SET_ERROR_RESPONSE after read which triggered an exception PCI: rcar: Finish transition to L1 state in rcar_pcie_config_access() PCI: dwc: Restore MSI Receiver mask during resume PCI: fu740: Drop redundant '-gpios' from DT GPIO lookup PCI/VGA: Replace full MIT license text with SPDX identifier PCI/VGA: Use unsigned format string to print lock counts PCI/VGA: Log bridge control messages when adding devices ...
2022-03-21PCI: Avoid broken MSI on SB600 USB devicesBjorn Helgaas1-0/+12
Some ATI SB600 USB adapters advertise MSI, but if INTx is disabled by setting PCI_COMMAND_INTX_DISABLE, MSI doesn't work either. The PCI/PCIe specs do not require software to set PCI_COMMAND_INTX_DISABLE when enabling MSI, but Linux has done that for many years. Mick reported that 306c54d0edb6 ("usb: hcd: Try MSI interrupts on PCI devices") broke these devices. Prior to 306c54d0edb6, they used INTx. Starting with 306c54d0edb6, they use MSI, and and the fact that Linux sets PCI_COMMAND_INTX_DISABLE means both INTx and MSI are disabled on these devices. Avoid this SB600 defect by disabling MSI so we use INTx as before. Fixes: 306c54d0edb6 ("usb: hcd: Try MSI interrupts on PCI devices") Link: https://lore.kernel.org/r/20220321183446.1108325-1-helgaas@kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=215690 Link: https://lore.kernel.org/all/PxIByDyBRcsbpcmVhGSNDFAoUcMmb78ctXCkw6fbpx25TGlCHvA6SJjjFkNr1FfQZMntYPTNyvEnblxzAZ8a6jP9ddLpKeCN6Chi_2FuexU=@protonmail.com/ Link: https://lore.kernel.org/r/20220314101448.90074-1-andriy.shevchenko@linux.intel.com BugLink: https://lore.kernel.org/all/20200702143045.23429-1-andriy.shevchenko@linux.intel.com/ Reported-by: Mick Lorain <micklorain@protonmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-02-23PCI: Mark all AMD Navi10 and Navi14 GPU ATS as brokenAlex Deucher1-5/+9
There are enough VBIOS escapes without the proper workaround that some users still hit this. Microsoft never productized ATS on Windows so OEM platforms that were Windows-only didn't always validate ATS. The advantages of ATS are not worth it compared to the potential instabilities on harvested boards. Disable ATS on all Navi10 and Navi14 boards. Symptoms include: amdgpu 0000:07:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0007 address=0xffffc02000 flags=0x0000] AMD-Vi: Event logged [IO_PAGE_FAULT device=07:00.0 domain=0x0007 address=0xffffc02000 flags=0x0000] [drm:amdgpu_job_timedout [amdgpu]] *ERROR* ring sdma0 timeout, signaled seq=6047, emitted seq=6049 amdgpu 0000:07:00.0: amdgpu: GPU reset begin! amdgpu 0000:07:00.0: amdgpu: GPU reset succeeded, trying to resume amdgpu 0000:07:00.0: [drm:amdgpu_ring_test_helper [amdgpu]] *ERROR* ring sdma0 test failed (-110) [drm:amdgpu_device_ip_resume_phase2 [amdgpu]] *ERROR* resume of IP block <sdma_v4_0> failed -110 amdgpu 0000:07:00.0: amdgpu: GPU reset(1) failed Related commits: e8946a53e2a6 ("PCI: Mark AMD Navi14 GPU ATS as broken") a2da5d8cc0b0 ("PCI: Mark AMD Raven iGPU ATS as broken in some platforms") 45beb31d3afb ("PCI: Mark AMD Navi10 GPU rev 0x00 ATS as broken") 5e89cd303e3a ("PCI: Mark AMD Navi14 GPU rev 0xc5 ATS as broken") d28ca864c493 ("PCI: Mark AMD Stoney Radeon R7 GPU ATS as broken") 9b44b0b09dec ("PCI: Mark AMD Stoney GPU ATS as broken") [bhelgaas: add symptoms and related commits] Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1760 Link: https://lore.kernel.org/r/20220222160801.841643-1-alexander.deucher@amd.com Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Guchun Chen <guchun.chen@amd.com>
2022-01-16Merge tag 'pci-v5.17-changes' of ↵Linus Torvalds1-2/+24
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Use pci_find_vsec_capability() instead of open-coding it (Andy Shevchenko) - Convert pci_dev_present() stub from macro to static inline to avoid 'unused variable' errors (Hans de Goede) - Convert sysfs slot attributes from default_attrs to default_groups (Greg Kroah-Hartman) - Use DWORD accesses for LTR, L1 SS to avoid BayHub OZ711LV2 erratum (Rajat Jain) - Remove unnecessary initialization of static variables (Longji Guo) Resource management: - Always write Intel I210 ROM BAR on update to work around device defect (Bjorn Helgaas) PCIe native device hotplug: - Fix pciehp lockdep errors on Thunderbolt undock (Hans de Goede) - Fix infinite loop in pciehp IRQ handler on power fault (Lukas Wunner) Power management: - Convert amd64-agp, sis-agp, via-agp from legacy PCI power management to generic power management (Vaibhav Gupta) IOMMU: - Add function 1 DMA alias quirk for Marvell 88SE9125 SATA controller so it can work with an IOMMU (Yifeng Li) Error handling: - Add PCI_ERROR_RESPONSE and related definitions for signaling and checking for transaction errors on PCI (Naveen Naidu) - Fabricate PCI_ERROR_RESPONSE data (~0) in config read wrappers, instead of in host controller drivers, when transactions fail on PCI (Naveen Naidu) - Use PCI_POSSIBLE_ERROR() to check for possible failure of config reads (Naveen Naidu) Peer-to-peer DMA: - Add Logan Gunthorpe as P2PDMA maintainer (Bjorn Helgaas) ASPM: - Calculate link L0s and L1 exit latencies when needed instead of caching them (Saheed O. Bolarinwa) - Calculate device L0s and L1 acceptable exit latencies when needed instead of caching them (Saheed O. Bolarinwa) - Remove struct aspm_latency since it's no longer needed (Saheed O. Bolarinwa) APM X-Gene PCIe controller driver: - Fix IB window setup, which was broken by the fact that IB resources are now sorted in address order instead of DT dma-ranges order (Rob Herring) Apple PCIe controller driver: - Enable clock gating to save power (Hector Martin) - Fix REFCLK1 enable/poll logic (Hector Martin) Broadcom STB PCIe controller driver: - Declare bitmap correctly for use by bitmap interfaces (Christophe JAILLET) - Clean up computation of legacy and non-legacy MSI bitmasks (Florian Fainelli) - Update suspend/resume/remove error handling to warn about errors and not fail the operation (Jim Quinlan) - Correct the "pcie" and "msi" interrupt descriptions in DT binding (Jim Quinlan) - Add DT bindings for endpoint voltage regulators (Jim Quinlan) - Split brcm_pcie_setup() into two functions (Jim Quinlan) - Add mechanism for turning on voltage regulators for connected devices (Jim Quinlan) - Turn voltage regulators for connected devices on/off when bus is added or removed (Jim Quinlan) - When suspending, don't turn off voltage regulators for wakeup devices (Jim Quinlan) Freescale i.MX6 PCIe controller driver: - Add i.MX8MM support (Richard Zhu) Freescale Layerscape PCIe controller driver: - Use DWC common ops instead of layerscape-specific link-up functions (Hou Zhiqiang) Intel VMD host bridge driver: - Honor platform ACPI _OSC feature negotiation for Root Ports below VMD (Kai-Heng Feng) - Add support for Raptor Lake SKUs (Karthik L Gopalakrishnan) - Reset everything below VMD before enumerating to work around failure to enumerate NVMe devices when guest OS reboots (Nirmal Patel) Bridge emulation (used by Marvell Aardvark and MVEBU): - Make emulated ROM BAR read-only by default (Pali Rohár) - Make some emulated legacy PCI bits read-only for PCIe devices (Pali Rohár) - Update reserved bits in emulated PCIe Capability (Pali Rohár) - Allow drivers to emulate different PCIe Capability versions (Pali Rohár) - Set emulated Capabilities List bit for all PCIe devices, since they must have at least a PCIe Capability (Pali Rohár) Marvell Aardvark PCIe controller driver: - Add bridge emulation definitions for PCIe DEVCAP2, DEVCTL2, DEVSTA2, LNKCAP2, LNKCTL2, LNKSTA2, SLTCAP2, SLTCTL2, SLTSTA2 (Pali Rohár) - Add aardvark support for DEVCAP2, DEVCTL2, LNKCAP2 and LNKCTL2 registers (Pali Rohár) - Clear all MSIs at setup to avoid spurious interrupts (Pali Rohár) - Disable bus mastering when unbinding host controller driver (Pali Rohár) - Mask all interrupts when unbinding host controller driver (Pali Rohár) - Fix memory leak in host controller unbind (Pali Rohár) - Assert PERST# when unbinding host controller driver (Pali Rohár) - Disable link training when unbinding host controller driver (Pali Rohár) - Disable common PHY when unbinding host controller driver (Pali Rohár) - Fix resource type checking to check only IORESOURCE_MEM, not IORESOURCE_MEM_64, which is a flavor of IORESOURCE_MEM (Pali Rohár) Marvell MVEBU PCIe controller driver: - Implement pci_remap_iospace() for ARM so mvebu can use devm_pci_remap_iospace() instead of the previous ARM-specific pci_ioremap_io() interface (Pali Rohár) - Use the standard pci_host_probe() instead of the device-specific mvebu_pci_host_probe() (Pali Rohár) - Replace all uses of ARM-specific pci_ioremap_io() with the ARM implementation of the standard pci_remap_iospace() interface and remove pci_ioremap_io() (Pali Rohár) - Skip initializing invalid Root Ports (Pali Rohár) - Check for errors from pci_bridge_emul_init() (Pali Rohár) - Ignore any bridges at non-zero function numbers (Pali Rohár) - Return ~0 data for invalid config read size (Pali Rohár) - Disallow mapping interrupts on emulated bridges (Pali Rohár) - Clear Root Port Memory & I/O Space Enable and Bus Master Enable at initialization (Pali Rohár) - Make type bits in Root Port I/O Base register read-only (Pali Rohár) - Disable Root Port windows when base/limit set to invalid values (Pali Rohár) - Set controller to Root Complex mode (Pali Rohár) - Set Root Port Class Code to PCI Bridge (Pali Rohár) - Update emulated Root Port secondary bus numbers to better reflect the actual topology (Pali Rohár) - Add PCI_BRIDGE_CTL_BUS_RESET support to emulated Root Ports so pci_reset_secondary_bus() can reset connected devices (Pali Rohár) - Add PCI_EXP_DEVCTL Error Reporting Enable support to emulated Root Ports (Pali Rohár) - Add PCI_EXP_RTSTA PME Status bit support to emulated Root Ports (Pali Rohár) - Add DEVCAP2, DEVCTL2 and LNKCTL2 support to emulated Root Ports on Armada XP and newer devices (Pali Rohár) - Export mvebu-mbus.c symbols to allow pci-mvebu.c to be a module (Pali Rohár) - Add support for compiling as a module (Pali Rohár) MediaTek PCIe controller driver: - Assert PERST# for 100ms to allow power and clock to stabilize (qizhong cheng) MediaTek PCIe Gen3 controller driver: - Disable Mediatek DVFSRC voltage request since lack of DVFSRC to respond to the request causes failure to exit L1 PM Substate (Jianjun Wang) MediaTek MT7621 PCIe controller driver: - Declare mt7621_pci_ops static (Sergio Paracuellos) - Give pcibios_root_bridge_prepare() access to host bridge windows (Sergio Paracuellos) - Move MIPS I/O coherency unit setup from driver to pcibios_root_bridge_prepare() (Sergio Paracuellos) - Add missing MODULE_LICENSE() (Sergio Paracuellos) - Allow COMPILE_TEST for all arches (Sergio Paracuellos) Microsoft Hyper-V host bridge driver: - Add hv-internal interfaces to encapsulate arch IRQ dependencies (Sunil Muthuswamy) - Add arm64 Hyper-V vPCI support (Sunil Muthuswamy) Qualcomm PCIe controller driver: - Undo PM setup in qcom_pcie_probe() error handling path (Christophe JAILLET) - Use __be16 type to store return value from cpu_to_be16() (Manivannan Sadhasivam) - Constify static dw_pcie_ep_ops (Rikard Falkeborn) Renesas R-Car PCIe controller driver: - Fix aarch32 abort handler so it doesn't check the wrong bus clock before accessing the host controller (Marek Vasut) TI Keystone PCIe controller driver: - Add register offset for ti,syscon-pcie-id and ti,syscon-pcie-mode DT properties (Kishon Vijay Abraham I) MicroSemi Switchtec management driver: - Add Gen4 automotive device IDs (Kelvin Cao) - Declare state_names[] as static so it's not allocated and initialized for every call (Kelvin Cao) Host controller driver cleanups: - Use of_device_get_match_data(), not of_match_device(), when we only need the device data in altera, artpec6, cadence, designware-plat, dra7xx, keystone, kirin (Fan Fei) - Drop pointless of_device_get_match_data() cast in j721e (Bjorn Helgaas) - Drop redundant struct device * from j721e since struct cdns_pcie already has one (Bjorn Helgaas) - Rename driver structs to *_pcie in intel-gw, iproc, ls-gen4, mediatek-gen3, microchip, mt7621, rcar-gen2, tegra194, uniphier, xgene, xilinx, xilinx-cpm for consistency across drivers (Fan Fei) - Fix invalid address space conversions in hisi, spear13xx (Bjorn Helgaas) Miscellaneous: - Sort Intel Device IDs by value (Andy Shevchenko) - Change Capability offsets to hex to match spec (Baruch Siach) - Correct misspellings (Krzysztof Wilczyński) - Terminate statement with semicolon in pci_endpoint_test.c (Ming Wang)" * tag 'pci-v5.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (151 commits) PCI: mt7621: Allow COMPILE_TEST for all arches PCI: mt7621: Add missing MODULE_LICENSE() PCI: mt7621: Move MIPS setup to pcibios_root_bridge_prepare() PCI: Let pcibios_root_bridge_prepare() access bridge->windows PCI: mt7621: Declare mt7621_pci_ops static PCI: brcmstb: Do not turn off WOL regulators on suspend PCI: brcmstb: Add control of subdevice voltage regulators PCI: brcmstb: Add mechanism to turn on subdev regulators PCI: brcmstb: Split brcm_pcie_setup() into two funcs dt-bindings: PCI: Add bindings for Brcmstb EP voltage regulators dt-bindings: PCI: Correct brcmstb interrupts, interrupt-map. PCI: brcmstb: Fix function return value handling PCI: brcmstb: Do not use __GENMASK PCI: brcmstb: Declare 'used' as bitmap, not unsigned long PCI: hv: Add arm64 Hyper-V vPCI support PCI: hv: Make the code arch neutral by adding arch specific interfaces PCI: pciehp: Use down_read/write_nested(reset_lock) to fix lockdep errors x86/PCI: Remove initialization of static variables to false PCI: Use DWORD accesses for LTR, L1 SS to avoid erratum misc: pci_endpoint_test: Terminate statement with semicolon ...
2022-01-13Merge branch 'pci/misc'Bjorn Helgaas1-2/+2
- Sort Intel Device IDs by value (Andy Shevchenko) - Change Capability offsets to hex to match spec (Baruch Siach) - Correct misspellings (Krzysztof Wilczyński) - Terminate statement with semicolon in pci_endpoint_test.c (Ming Wang) * pci/misc: misc: pci_endpoint_test: Terminate statement with semicolon PCI: Correct misspelled words PCI: Change capability register offsets to hex PCI: Sort Intel Device IDs by value
2022-01-13Merge branch 'pci/virtualization'Bjorn Helgaas1-0/+3
- Add function 1 DMA alias quirk for Marvell 88SE9125 SATA controller so it can work with an IOMMU (Yifeng Li) * pci/virtualization: PCI: Add function 1 DMA alias quirk for Marvell 88SE9125 SATA controller
2022-01-13Merge branch 'pci/switchtec'Bjorn Helgaas1-0/+9
- Add Gen4 automotive device IDs (Kelvin Cao) - Declare state_names[] as static so it's not allocated and initialized for every call (Kelvin Cao) * pci/switchtec: PCI/switchtec: Declare local state_names[] as static PCI/switchtec: Add Gen4 automotive device IDs
2022-01-11PCI: Work around Intel I210 ROM BAR overlap defectBjorn Helgaas1-0/+10
Per PCIe r5, sec 7.5.1.2.4, a device must not claim accesses to its Expansion ROM unless both the Memory Space Enable and the Expansion ROM Enable bit are set. But apparently some Intel I210 NICs don't work correctly if the ROM BAR overlaps another BAR, even if the Expansion ROM is disabled. Michael reported that on a Kontron SMARC-sAL28 ARM64 system with U-Boot v2021.01-rc3, the ROM BAR overlaps BAR 3, and networking doesn't work at all: BAR 0: 0x40000000 (32-bit, non-prefetchable) [size=1M] BAR 3: 0x40200000 (32-bit, non-prefetchable) [size=16K] ROM: 0x40200000 (disabled) [size=1M] NETDEV WATCHDOG: enP2p1s0 (igb): transmit queue 0 timed out Hardware name: Kontron SMARC-sAL28 (Single PHY) on SMARC Eval 2.0 carrier (DT) igb 0002:01:00.0 enP2p1s0: Reset adapter Previously, pci_std_update_resource() wrote the assigned ROM address to the BAR only when the ROM was enabled. This meant that the I210 ROM BAR could be left with an address assigned by firmware, which might overlap with other BARs. Quirk these I210 devices so pci_std_update_resource() always writes the assigned address to the ROM BAR, whether or not the ROM is enabled. Link: https://lore.kernel.org/r/20211223163754.GA1267351@bhelgaas Link: https://lore.kernel.org/r/20201230185317.30915-1-michael@walle.cc Link: https://bugzilla.kernel.org/show_bug.cgi?id=211105 Reported-by: Michael Walle <michael@walle.cc> Tested-by: Michael Walle <michael@walle.cc> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2022-01-07PCI: Correct misspelled wordsKrzysztof Wilczyński1-2/+2
Fix a number of misspelled words, and while at it, correct two phrases used to indicate a status of an operation where words used have been cleverly truncated and thus always trigger a spellchecking error while performing a static code analysis over the PCI tree. [bhelgaas: reverse sense of quirk ternary] Link: https://lore.kernel.org/r/20220107225942.121484-1-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-12-15PCI: Add function 1 DMA alias quirk for Marvell 88SE9125 SATA controllerYifeng Li1-0/+3
Like other SATA controller chips in the Marvell 88SE91xx series, the Marvell 88SE9125 has the same DMA requester ID hardware bug that prevents it from working under IOMMU. Add it to the list of devices that need the quirk. Without this patch, device initialization fails with DMA errors: ata8: softreset failed (1st FIS failed) DMAR: DRHD: handling fault status reg 2 DMAR: [DMA Write NO_PASID] Request device [03:00.1] fault addr 0xfffc0000 [fault reason 0x02] Present bit in context entry is clear DMAR: DRHD: handling fault status reg 2 DMAR: [DMA Read NO_PASID] Request device [03:00.1] fault addr 0xfffc0000 [fault reason 0x02] Present bit in context entry is clear After applying the patch, the controller can be successfully initialized: ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 330) ata8.00: ATAPI: PIONEER BD-RW BDR-207M, 1.21, max UDMA/100 ata8.00: configured for UDMA/100 scsi 7:0:0:0: CD-ROM PIONEER BD-RW BDR-207M 1.21 PQ: 0 ANSI: 5 Link: https://lore.kernel.org/r/YahpKVR+McJVDdkD@work Reported-by: Sam Bingner <sam@bingner.com> Tested-by: Sam Bingner <sam@bingner.com> Tested-by: Yifeng Li <tomli@tomli.me> Signed-off-by: Yifeng Li <tomli@tomli.me> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com> Cc: stable@vger.kernel.org
2021-11-24PCI: Convert to device_create_managed_software_node()Heikki Krogerus1-1/+1
In quirk_huawei_pcie_sva(), device_add_properties() is used to inject additional device properties, but there is no device_remove_properties() call anywhere to remove those properties. The assumption is most likely that the device is never removed, and the properties therefore do not also never need to be removed. Even though it is unlikely that the device is ever removed in this case, it is safer to make sure that the properties are also removed if the device ever does get unregistered. To achieve this, instead of adding a separate quirk for the case of device removal where device_remove_properties() is called, using device_create_managed_software_node() instead of device_add_properties(). Both functions create a software node (a type of fwnode) that holds the device properties, which is then assigned to the device very much the same way. The difference between the two functions is, that device_create_managed_software_node() guarantees that the software node (together with the properties) is removed when the device is removed. The function device_add_property() does not guarantee that, so the properties added with it should always be removed with device_remove_properties(). Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-11-19PCI/switchtec: Add Gen4 automotive device IDsKelvin Cao1-0/+9
Advertise support of the Gen4 automotive variants in module's device ID table and add the same IDs to the list of switchtec quirks. Link: https://lore.kernel.org/r/20211119003803.2333-2-kelvin.cao@microchip.com Signed-off-by: Kelvin Cao <kelvin.cao@microchip.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
2021-11-11PCI: Add MSI masking quirk for Nvidia ION AHCIMarc Zyngier1-0/+6
The ION AHCI device pretends that MSI masking isn't a thing, while it actually implements it and needs MSIs to be unmasked to work. Add a quirk to that effect. Reported-by: Rui Salvaterra <rsalvaterra@gmail.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Rui Salvaterra <rsalvaterra@gmail.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Bjorn Helgaas <helgaas@kernel.org> Link: https://lore.kernel.org/r/CALjTZvbzYfBuLB+H=fj2J+9=DxjQ2Uqcy0if_PvmJ-nU-qEgkg@mail.gmail.com Link: https://lore.kernel.org/r/20211104180130.3825416-3-maz@kernel.org
2021-11-05Merge branch 'pci/misc'Bjorn Helgaas1-7/+7
- Tidy setup-irq.c comments (Pranay Sanghai) - Fix misspellings (Krzysztof Wilczyński) - Fix sprintf(), sscanf() format mismatches (Krzysztof Wilczyński) - Tidy cpqphp code formatting (Krzysztof Wilczyński) - Remove unused pci_pool wrappers, which have been replaced by dma_pool (Cai Huoqing) - Remove a redundant initialization in __pci_reset_function_locked() (Colin Ian King) - Use 'unsigned int' instead of 'unsigned' (Krzysztof Wilczyński) - Update PCI subsystem information in MAINTAINERS (Krzysztof Wilczyński) - Include generic <linux/> headers instead of <asm/> for cpqphp and vmd (Krzysztof Wilczyński) * pci/misc: PCI: vmd: Drop redundant includes of <asm/device.h>, <asm/msi.h> PCI: cpqphp: Use <linux/io.h> instead of <asm/io.h> MAINTAINERS: Update PCI subsystem information PCI: Prefer 'unsigned int' over bare 'unsigned' PCI: Remove redundant 'rc' initialization PCI: Remove unused pci_pool wrappers PCI: cpqphp: Format if-statement code block correctly PCI: Use unsigned to match sscanf("%x") in pci_dev_str_match_path() PCI: hv: Remove unnecessary use of %hx PCI: Correct misspelled and remove duplicated words PCI: Tidy comments
2021-11-05PCI: Add ACS quirk for Pericom PI7C9X2G switchesNathan Rossi1-0/+55
The Pericom PI7C9X2G404/PI7C9X2G304/PI7C9X2G303 PCIe switches have an erratum for ACS P2P Request Redirect behaviour when used in the cut-through forwarding mode. The recommended work around for this issue is to use the switch in store and forward mode. The erratum results in packets being queued and not being delivered upstream, which can be observed as very poor downstream device performance and/or dropped device-generated data/interrupts. Add a fixup so that when enabling or resuming the downstream port we check if it has enabled ACS P2P Request Redirect, and if so, change the device (via the upstream port) to use the store and forward operating mode. Link: https://bugzilla.kernel.org/show_bug.cgi?id=177471 Link: https://lore.kernel.org/r/20210910025823.196508-1-nathan@nathanrossi.com Tested-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Nathan Rossi <nathan.rossi@digi.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-10-27PCI: Prefer 'unsigned int' over bare 'unsigned'Krzysztof Wilczyński1-6/+6
The bare "unsigned" type implicitly means "unsigned int", but the preferred coding style is to use the complete type name. Update the bare use of "unsigned" to the preferred "unsigned int". No change to functionality intended. See a1ce18e4f941 ("checkpatch: warn on bare unsigned or signed declarations without int"). Link: https://lore.kernel.org/r/20211013014136.1117543-1-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-10-08PCI: Correct misspelled and remove duplicated wordsKrzysztof Wilczyński1-1/+1
Correct a number of misspelled words and remove any words that were duplicated in the PCI tree. No change to functionality intended. Link: https://lore.kernel.org/r/20211006233827.147328-1-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-09-20PCI: Mark Atheros QCA6174 to avoid bus resetIngmar Klein1-0/+1
When passing the Atheros QCA6174 through to a virtual machine, the VM hangs at the point where the ath10k driver loads. Add a quirk to avoid bus resets on this device, which avoids the hang. [bhelgaas: commit log] Link: https://lore.kernel.org/r/08982e05-b6e8-5a8d-24ab-da1488ee50a8@web.de Signed-off-by: Ingmar Klein <ingmar_klein@web.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Pali Rohár <pali@kernel.org> Cc: stable@vger.kernel.org
2021-09-15PCI: Add AMD GPU multi-function power dependenciesEvan Quan1-2/+7
Some AMD GPUs have built-in USB xHCI and USB Type-C UCSI controllers with power dependencies between the GPU and the other functions as in 6d2e369f0d4c ("PCI: Add NVIDIA GPU multi-function power dependencies"). Add device link support for the AMD integrated USB xHCI and USB Type-C UCSI controllers. Without this, runtime power management, including GPU resume and temp and fan sensors don't work correctly. Reported-at: https://gitlab.freedesktop.org/drm/amd/-/issues/1704 Link: https://lore.kernel.org/r/20210903063311.3606226-1-evan.quan@amd.com Signed-off-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org
2021-09-07Merge tag 'pci-v5.15-changes' of ↵Linus Torvalds1-21/+107
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Convert controller drivers to generic_handle_domain_irq() (Marc Zyngier) - Simplify VPD (Vital Product Data) access and search (Heiner Kallweit) - Update bnx2, bnx2x, bnxt, cxgb4, cxlflash, sfc, tg3 drivers to use simplified VPD interfaces (Heiner Kallweit) - Run Max Payload Size quirks before configuring MPS; work around ASMedia ASM1062 SATA MPS issue (Marek Behún) Resource management: - Refactor pci_ioremap_bar() and pci_ioremap_wc_bar() (Krzysztof Wilczyński) - Optimize pci_resource_len() to reduce kernel size (Zhen Lei) PCI device hotplug: - Fix a double unmap in ibmphp (Vishal Aslot) PCIe port driver: - Enable Bandwidth Notification only if port supports it (Stuart Hayes) Sysfs/proc/syscalls: - Add schedule point in proc_bus_pci_read() (Krzysztof Wilczyński) - Return ~0 data on pciconfig_read() CAP_SYS_ADMIN failure (Krzysztof Wilczyński) - Return "int" from pciconfig_read() syscall (Krzysztof Wilczyński) Virtualization: - Extend "pci=noats" to also turn on Translation Blocking to protect against some DMA attacks (Alex Williamson) - Add sysfs mechanism to control the type of reset used between device assignments to VMs (Amey Narkhede) - Add support for ACPI _RST reset method (Shanker Donthineni) - Add ACS quirks for Cavium multi-function devices (George Cherian) - Add ACS quirks for NXP LX2xx0 and LX2xx2 platforms (Wasim Khan) - Allow HiSilicon AMBA devices that appear as fake PCI devices to use PASID and SVA (Zhangfei Gao) Endpoint framework: - Add support for SR-IOV Endpoint devices (Kishon Vijay Abraham I) - Zero-initialize endpoint test tool parameters so we don't use random parameters (Shunyong Yang) APM X-Gene PCIe controller driver: - Remove redundant dev_err() call in xgene_msi_probe() (ErKun Yang) Broadcom iProc PCIe controller driver: - Don't fail devm_pci_alloc_host_bridge() on missing 'ranges' because it's optional on BCMA devices (Rob Herring) - Fix BCMA probe resource handling (Rob Herring) Cadence PCIe driver: - Work around J7200 Link training electrical issue by increasing delays in LTSSM (Nadeem Athani) Intel IXP4xx PCI controller driver: - Depend on ARCH_IXP4XX to avoid useless config questions (Geert Uytterhoeven) Intel Keembay PCIe controller driver: - Add Intel Keem Bay PCIe controller (Srikanth Thokala) Marvell Aardvark PCIe controller driver: - Work around config space completion handling issues (Evan Wang) - Increase timeout for config access completions (Pali Rohár) - Emulate CRS Software Visibility bit (Pali Rohár) - Configure resources from DT 'ranges' property to fix I/O space access (Pali Rohár) - Serialize INTx mask/unmask (Pali Rohár) MediaTek PCIe controller driver: - Add MT7629 support in DT (Chuanjia Liu) - Fix an MSI issue (Chuanjia Liu) - Get syscon regmap ("mediatek,generic-pciecfg"), IRQ number ("pci_irq"), PCI domain ("linux,pci-domain") from DT properties if present (Chuanjia Liu) Microsoft Hyper-V host bridge driver: - Add ARM64 support (Boqun Feng) - Support "Create Interrupt v3" message (Sunil Muthuswamy) NVIDIA Tegra PCIe controller driver: - Use seq_puts(), move err_msg from stack to static, fix OF node leak (Christophe JAILLET) NVIDIA Tegra194 PCIe driver: - Disable suspend when in Endpoint mode (Om Prakash Singh) - Fix MSI-X address programming error (Om Prakash Singh) - Disable interrupts during suspend to avoid spurious AER link down (Om Prakash Singh) Renesas R-Car PCIe controller driver: - Work around hardware issue that prevents Link L1->L0 transition (Marek Vasut) - Fix runtime PM refcount leak (Dinghao Liu) Rockchip DesignWare PCIe controller driver: - Add Rockchip RK356X host controller driver (Simon Xue) TI J721E PCIe driver: - Add support for J7200 and AM64 (Kishon Vijay Abraham I) Toshiba Visconti PCIe controller driver: - Add Toshiba Visconti PCIe host controller driver (Nobuhiro Iwamatsu) Xilinx NWL PCIe controller driver: - Enable PCIe reference clock via CCF (Hyun Kwon) Miscellaneous: - Convert sta2x11 from 'pci_' to 'dma_' API (Christophe JAILLET) - Fix pci_dev_str_match_path() alloc while atomic bug (used for kernel parameters that specify devices) (Dan Carpenter) - Remove pointless Precision Time Management warning when PTM is present but not enabled (Jakub Kicinski) - Remove surplus "break" statements (Krzysztof Wilczyński)" * tag 'pci-v5.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (132 commits) PCI: ibmphp: Fix double unmap of io_mem x86/PCI: sta2x11: switch from 'pci_' to 'dma_' API PCI/VPD: Use unaligned access helpers PCI/VPD: Clean up public VPD defines and inline functions cxgb4: Use pci_vpd_find_id_string() to find VPD ID string PCI/VPD: Add pci_vpd_find_id_string() PCI/VPD: Include post-processing in pci_vpd_find_tag() PCI/VPD: Stop exporting pci_vpd_find_info_keyword() PCI/VPD: Stop exporting pci_vpd_find_tag() PCI: Set dma-can-stall for HiSilicon chips PCI: rockchip-dwc: Add Rockchip RK356X host controller driver PCI: dwc: Remove surplus break statement after return PCI: artpec6: Remove local code block from switch statement PCI: artpec6: Remove surplus break statement after return MAINTAINERS: Add entries for Toshiba Visconti PCIe controller PCI: visconti: Add Toshiba Visconti PCIe host controller driver PCI/portdrv: Enable Bandwidth Notification only if port supports it PCI: Allow PASID on fake PCIe devices without TLP prefixes PCI: mediatek: Use PCI domain to handle ports detection PCI: mediatek: Add new method to get irq number ...
2021-09-02Merge branch 'pci/virtualization'Bjorn Helgaas1-1/+50
- Add ACS quirks for NXP LX2xx0 and LX2xx2 platforms (Wasim Khan) - Add ACS quirks for Cavium multi-function devices (George Cherian) - Enforce pci=noats with Transaction Blocking (Alex Williamson) * pci/virtualization: PCI/ACS: Enforce pci=noats with Transaction Blocking PCI: Add ACS quirks for Cavium multi-function devices PCI: Add ACS quirks for NXP LX2xx0 and LX2xx2 platforms
2021-09-02Merge branch 'pci/reset'Bjorn Helgaas1-14/+11
- Cache PCIe Device Capabilities register (Amey Narkhede) - Add pcie_reset_flr() with 'probe' argument (Amey Narkhede) - Add pdev->reset_methods[] array to track reset method ordering (Amey Narkhede) - Remove reset_fn field from pci_dev (Amey Narkhede) - Add sysfs interface to query and set device reset mechanism (Amey Narkhede) - Add pci_set_acpi_fwnode() to set ACPI_COMPANION (Shanker Donthineni) - Use acpi_pci_power_manageable() instead of duplicating logic (Shanker Donthineni) - Set ACPI fwnode early and at the same time with OF (Shanker Donthineni) - Add support for ACPI _RST reset method (Shanker Donthineni) - Change reset function 'probe' argument to bool (Amey Narkhede) * pci/reset: PCI: Change the type of probe argument in reset functions PCI: Add support for ACPI _RST reset method PCI: Setup ACPI fwnode early and at the same time with OF PCI: Use acpi_pci_power_manageable() PCI: Add pci_set_acpi_fwnode() to set ACPI_COMPANION PCI: Allow userspace to query and set device reset mechanism PCI: Remove reset_fn field from pci_dev PCI: Add array to track reset method ordering PCI: Add pcie_reset_flr() with 'probe' argument PCI: Cache PCIe Device Capabilities register
2021-09-02Merge branch 'pci/iommu'Bjorn Helgaas1-0/+39
- Allow PASID on fake PCIe devices, e.g., HiSilicon KunPeng920 and KunPeng930 AMBA devices, without TLP prefixes (Zhangfei Gao) - Allow SVA / dma-can-stall on fake PCIe devices (Zhangfei Gao) * pci/iommu: PCI: Set dma-can-stall for HiSilicon chips PCI: Allow PASID on fake PCIe devices without TLP prefixes
2021-08-31PCI: Set dma-can-stall for HiSilicon chipsZhangfei Gao1-0/+25
HiSilicon KunPeng920 and KunPeng930 have devices that appear as PCI but are actually on the AMBA bus. These fake PCI devices can support SVA via the SMMU stall feature. DT systems can indicate this in the device tree, but ACPI systems don't have that mechanism, so add a "dma-can-stall" property manually for them. [bhelgaas: add text from Robin as comment near quirk] Link: https://lore.kernel.org/r/1626144876-11352-4-git-send-email-zhangfei.gao@linaro.org Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Robin Murphy <robin.murphy@arm.com>
2021-08-26PCI: Allow PASID on fake PCIe devices without TLP prefixesZhangfei Gao1-0/+14
Some systems, e.g., HiSilicon KunPeng920 and KunPeng930, have devices that appear as PCI but are actually on the AMBA bus. Some of these fake PCI devices support a PASID-like feature and they do have a working PASID capability even though they do not use the PCIe Transport Layer Protocol and do not support TLP prefixes. Add a pasid_no_tlp bit for this "PASID works without TLP prefixes" case and update pci_enable_pasid() so it can enable PASID on these devices. Set this bit for HiSilicon KunPeng920 and KunPeng930. [bhelgaas: squashed, commit log] Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/1626144876-11352-2-git-send-email-zhangfei.gao@linaro.org Link: https://lore.kernel.org/r/1626144876-11352-3-git-send-email-zhangfei.gao@linaro.org Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-08-20PCI/ACS: Enforce pci=noats with Transaction BlockingAlex Williamson1-1/+1
PCIe Address Translation Services (ATS) provides a mechanism for a device to provide an on-device caching translation agent (device IOTLB). We already have a means to disable support for this feature via the pci=noats option. For untrusted and externally facing devices, we not only disable ATS support for the device, but we use Access Control Services (ACS) Transaction Blocking to actively prevent devices from sending TLPs with non-default AT field values. Extend pci=noats to also make use of PCI_ACS_TB so that not only is ATS disabled at the device, but blocked at the downstream ports. This provides a means to further lock-down ATS for cases such as device assignment, where it may not be the hardware configuration of the device that makes it untrusted, but the driver running on the device. Link: https://lore.kernel.org/r/162404966325.2362347.12176138291577486015.stgit@omen Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Rajat Jain <rajatja@google.com>
2021-08-20PCI: Add ACS quirks for Cavium multi-function devicesGeorge Cherian1-0/+4
Some Cavium endpoints are implemented as multi-function devices without ACS capability, but they actually don't support peer-to-peer transactions. Add ACS quirks to declare DMA isolation for the following devices: - BGX device found on Octeon-TX (8xxx) - CGX device found on Octeon-TX2 (9xxx) - RPM device found on Octeon-TX3 (10xxx) Link: https://lore.kernel.org/r/20210810122425.1115156-1-george.cherian@marvell.com Signed-off-by: George Cherian <george.cherian@marvell.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-08-19PCI: Increase D3 delay for AMD Renoir/Cezanne XHCIMarcin Bachry1-0/+1
The Renoir XHCI controller apparently doesn't resume reliably with the standard D3hot-to-D0 delay. Increase it to 20ms. [Alex: I talked to the AMD USB hardware team and the AMD Windows team and they are not aware of any HW errata or specific issues. The HW works fine in Windows. I was told Windows uses a rather generous default delay of 100ms for PCI state transitions.] Link: https://lore.kernel.org/r/20210722025858.220064-1-alexander.deucher@amd.com Signed-off-by: Marcin Bachry <hegel666@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Prike Liang <prike.liang@amd.com> Cc: Shyam Sundar S K <shyam-sundar.s-k@amd.com>
2021-08-18PCI: Change the type of probe argument in reset functionsAmey Narkhede1-10/+10
Change the type of probe argument in functions which implement reset methods from int to bool to make the context and intent clear. Suggested-by: Alex Williamson <alex.williamson@redhat.com> Link: https://lore.kernel.org/r/20210817180500.1253-10-ameynarkhede03@gmail.com Signed-off-by: Amey Narkhede <ameynarkhede03@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-08-17PCI: Remove reset_fn field from pci_devAmey Narkhede1-1/+1
"reset_fn" indicates whether the device supports any reset mechanism. Remove the use of reset_fn in favor of the reset_methods array that tracks supported reset mechanisms of a device and their ordering. The octeon driver incorrectly used reset_fn to detect whether the device supports FLR or not. Use pcie_reset_flr() to probe whether it supports FLR. Co-developed-by: Alex Williamson <alex.williamson@redhat.com> Link: https://lore.kernel.org/r/20210817180500.1253-5-ameynarkhede03@gmail.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Amey Narkhede <ameynarkhede03@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
2021-08-17PCI: Add pcie_reset_flr() with 'probe' argumentAmey Narkhede1-6/+3
Most reset methods are of the form "pci_*_reset(dev, probe)". pcie_flr() was an exception because it relied on a separate pcie_has_flr() function instead of taking a "probe" argument. Add "pcie_reset_flr(dev, probe)" to follow the convention. Remove pcie_has_flr(). Some pcie_flr() callers that did not use pcie_has_flr() remain. [bhelgaas: commit log, rework pcie_reset_flr() to use dev->devcap directly] Link: https://lore.kernel.org/r/20210817180500.1253-3-ameynarkhede03@gmail.com Signed-off-by: Amey Narkhede <ameynarkhede03@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
2021-08-03PCI: Add ACS quirks for NXP LX2xx0 and LX2xx2 platformsWasim Khan1-0/+45
Root Ports in NXP LX2xx0 and LX2xx2, where each Root Port is a Root Complex with unique segment numbers, do provide isolation features to disable peer transactions and validate bus numbers in requests, but do not provide an actual PCIe ACS capability. Add ACS quirks for NXP LX2xx0 A/C/E/N and LX2xx2 A/C/E/N platforms. LX2xx0A : without security features + CAN-FD LX2160A (0x8d81) - 16 cores LX2120A (0x8da1) - 12 cores LX2080A (0x8d83) - 8 cores LX2xx0C : security features + CAN-FD LX2160C (0x8d80) - 16 cores LX2120C (0x8da0) - 12 cores LX2080C (0x8d82) - 8 cores LX2xx0E : security features + CAN LX2160E (0x8d90) - 16 cores LX2120E (0x8db0) - 12 cores LX2080E (0x8d92) - 8 cores LX2xx0N : without security features + CAN LX2160N (0x8d91) - 16 cores LX2120N (0x8db1) - 12 cores LX2080N (0x8d93) - 8 cores LX2xx2A : without security features + CAN-FD LX2162A (0x8d89) - 16 cores LX2122A (0x8da9) - 12 cores LX2082A (0x8d8b) - 8 cores LX2xx2C : security features + CAN-FD LX2162C (0x8d88) - 16 cores LX2122C (0x8da8) - 12 cores LX2082C (0x8d8a) - 8 cores LX2xx2E : security features + CAN LX2162E (0x8d98) - 16 cores LX2122E (0x8db8) - 12 cores LX2082E (0x8d9a) - 8 cores LX2xx2N : without security features + CAN LX2162N (0x8d99) - 16 cores LX2122N (0x8db9) - 12 cores LX2082N (0x8d9b) - 8 cores [bhelgaas: put PCI_VENDOR_ID_NXP definition next to PCI_VENDOR_ID_FREESCALE as a clue that they share the same Device ID namespace] Link: https://lore.kernel.org/r/20210729121747.1823086-1-wasim.khan@oss.nxp.com Link: https://lore.kernel.org/r/20210803180021.3252886-1-wasim.khan@oss.nxp.com Signed-off-by: Wasim Khan <wasim.khan@nxp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-07-26PCI: Restrict ASMedia ASM1062 SATA Max Payload Size SupportedMarek Behún1-0/+1
The ASMedia ASM1062 SATA controller advertises Max_Payload_Size_Supported of 512, but in fact it cannot handle incoming TLPs with payload size of 512. We discovered this issue on PCIe controllers capable of MPS = 512 (Aardvark and DesignWare), where the issue presents itself as an External Abort. Bjorn Helgaas says: Probably ASM1062 reports a Malformed TLP error when it receives a data payload of 512 bytes, and Aardvark, DesignWare, etc convert this to an arm64 External Abort. [1] To avoid this problem, limit the ASM1062 Max Payload Size Supported to 256 bytes, so we set the Max Payload Size of devices that may send TLPs to the ASM1062 to 256 or less. [1] https://lore.kernel.org/linux-pci/20210601170907.GA1949035@bjorn-Precision-5520/ BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212695 Link: https://lore.kernel.org/r/20210624171418.27194-2-kabel@kernel.org Reported-by: Rötti <espressobinboardarmbiantempmailaddress@posteo.de> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com> Reviewed-by: Pali Rohár <pali@kernel.org> Cc: stable@vger.kernel.org
2021-07-26PCI: Call Max Payload Size-related fixup quirks earlyMarek Behún1-6/+6
pci_device_add() calls HEADER fixups after pci_configure_device(), which configures Max Payload Size. Convert MPS-related fixups to EARLY fixups so pci_configure_mps() takes them into account. Fixes: 27d868b5e6cfa ("PCI: Set MPS to match upstream bridge") Link: https://lore.kernel.org/r/20210624171418.27194-1-kabel@kernel.org Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org
2021-07-08Merge tag 'pci-v5.14-changes' of ↵Linus Torvalds1-0/+11
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Fix dsm_label_utf16s_to_utf8s() buffer overrun (Krzysztof Wilczyński) - Rely on lengths from scnprintf(), dsm_label_utf16s_to_utf8s() (Krzysztof Wilczyński) - Use sysfs_emit() and sysfs_emit_at() in "show" functions (Krzysztof Wilczyński) - Fix 'resource_alignment' newline issues (Krzysztof Wilczyński) - Add 'devspec' newline (Krzysztof Wilczyński) - Dynamically map ECAM regions (Russell King) Resource management: - Coalesce host bridge contiguous apertures (Kai-Heng Feng) PCIe native device hotplug: - Ignore Link Down/Up caused by DPC (Lukas Wunner) Power management: - Leave Apple Thunderbolt controllers on for s2idle or standby (Konstantin Kharlamov) Virtualization: - Work around Huawei Intelligent NIC VF FLR erratum (Chiqijun) - Clarify error message for unbound IOV devices (Moritz Fischer) - Add pci_reset_bus_function() Secondary Bus Reset interface (Raphael Norwitz) Peer-to-peer DMA: - Simplify distance calculation (Christoph Hellwig) - Finish RCU conversion of pdev->p2pdma (Eric Dumazet) - Rename upstream_bridge_distance() and rework doc (Logan Gunthorpe) - Collect acs list in stack buffer to avoid sleeping (Logan Gunthorpe) - Use correct calc_map_type_and_dist() return type (Logan Gunthorpe) - Warn if host bridge not in whitelist (Logan Gunthorpe) - Refactor pci_p2pdma_map_type() (Logan Gunthorpe) - Avoid pci_get_slot(), which may sleep (Logan Gunthorpe) Altera PCIe controller driver: - Add Joyce Ooi as Altera PCIe maintainer (Joyce Ooi) Broadcom iProc PCIe controller driver: - Fix multi-MSI base vector number allocation (Sandor Bodo-Merle) - Support multi-MSI only on uniprocessor kernel (Sandor Bodo-Merle) Freescale i.MX6 PCIe controller driver: - Limit DBI register length for imx6qp PCIe (Richard Zhu) - Add "vph-supply" for PHY supply voltage (Richard Zhu) - Enable PHY internal regulator when supplied >3V (Richard Zhu) - Remove imx6_pcie_probe() redundant error message (Zhen Lei) Intel Gateway PCIe controller driver: - Fix INTx enable (Martin Blumenstingl) Marvell Aardvark PCIe controller driver: - Fix checking for PIO Non-posted Request (Pali Rohár) - Implement workaround for the readback value of VEND_ID (Pali Rohár) MediaTek PCIe controller driver: - Remove redundant error printing in mtk_pcie_subsys_powerup() (Zhen Lei) MediaTek PCIe Gen3 controller driver: - Add missing MODULE_DEVICE_TABLE (Zou Wei) Microchip PolarFlare PCIe controller driver: - Make struct event_descs static (Krzysztof Wilczyński) Microsoft Hyper-V host bridge driver: - Fix race condition when removing the device (Long Li) - Remove bus device removal unused refcount/functions (Long Li) Mobiveil PCIe controller driver: - Remove unused readl and writel functions (Krzysztof Wilczyński) NVIDIA Tegra PCIe controller driver: - Add missing MODULE_DEVICE_TABLE (Zou Wei) NVIDIA Tegra194 PCIe controller driver: - Fix tegra_pcie_ep_raise_msi_irq() ill-defined shift (Jon Hunter) - Fix host initialization during resume (Vidya Sagar) Rockchip PCIe controller driver: - Register IRQ handlers after device and data are ready (Javier Martinez Canillas)" * tag 'pci-v5.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (48 commits) PCI/P2PDMA: Finish RCU conversion of pdev->p2pdma PCI: xgene: Annotate __iomem pointer PCI: Fix kernel-doc formatting PCI: cpcihp: Declare cpci_debug in header file MAINTAINERS: Add Joyce Ooi as Altera PCIe maintainer PCI: rockchip: Register IRQ handlers after device and data are ready PCI: tegra194: Fix tegra_pcie_ep_raise_msi_irq() ill-defined shift PCI: aardvark: Implement workaround for the readback value of VEND_ID PCI: aardvark: Fix checking for PIO Non-posted Request PCI: tegra194: Fix host initialization during resume PCI: tegra: Add missing MODULE_DEVICE_TABLE PCI: imx6: Enable PHY internal regulator when supplied >3V dt-bindings: imx6q-pcie: Add "vph-supply" for PHY supply voltage PCI: imx6: Limit DBI register length for imx6qp PCIe PCI: imx6: Remove imx6_pcie_probe() redundant error message PCI: intel-gw: Fix INTx enable PCI: iproc: Support multi-MSI only on uniprocessor kernel PCI: iproc: Fix multi-MSI base vector number allocation PCI: mediatek-gen3: Add missing MODULE_DEVICE_TABLE PCI: Dynamically map ECAM regions ...
2021-07-06Merge branch 'pci/reset'Bjorn Helgaas1-0/+65
- Add pci_reset_bus_function() Secondary Bus Reset interface (Raphael Norwitz) - Work around Huawei Intelligent NIC VF FLR erratum (Chiqijun) * pci/reset: PCI: Work around Huawei Intelligent NIC VF FLR erratum PCI: Add pci_reset_bus_function() Secondary Bus Reset interface
2021-06-18PCI: Add ACS quirk for Broadcom BCM57414 NICSriharsha Basavapatna1-0/+2
The Broadcom BCM57414 NIC may be a multi-function device. While it does not advertise an ACS capability, peer-to-peer transactions are not possible between the individual functions, so it is safe to treat them as fully isolated. Add an ACS quirk for this device so the functions can be in independent IOMMU groups and attached individually to userspace applications using VFIO. [bhelgaas: commit log] Link: https://lore.kernel.org/r/1621645997-16251-1-git-send-email-michael.chan@broadcom.com Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org
2021-06-18PCI: Mark AMD Navi14 GPU ATS as brokenEvan Quan1-1/+3
Observed unexpected GPU hang during runpm stress test on 0x7341 rev 0x00. Further debugging shows broken ATS is related. Disable ATS on this part. Similar issues on other devices: a2da5d8cc0b0 ("PCI: Mark AMD Raven iGPU ATS as broken in some platforms") 45beb31d3afb ("PCI: Mark AMD Navi10 GPU rev 0x00 ATS as broken") 5e89cd303e3a ("PCI: Mark AMD Navi14 GPU rev 0xc5 ATS as broken") Suggested-by: Alex Deucher <alexander.deucher@amd.com> Link: https://lore.kernel.org/r/20210602021255.939090-1-evan.quan@amd.com Signed-off-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com> Cc: stable@vger.kernel.org
2021-06-18PCI: Work around Huawei Intelligent NIC VF FLR erratumChiqijun1-0/+65
pcie_flr() starts a Function Level Reset (FLR), waits 100ms (the maximum time allowed for FLR completion by PCIe r5.0, sec 6.6.2), and waits for the FLR to complete. It assumes the FLR is complete when a config read returns valid data. When we do an FLR on several Huawei Intelligent NIC VFs at the same time, firmware on the NIC processes them serially. The VF may respond to config reads before the firmware has completed its reset processing. If we bind a driver to the VF (e.g., by assigning the VF to a virtual machine) in the interval between the successful config read and completion of the firmware reset processing, the NIC VF driver may fail to load. Prevent this driver failure by waiting for the NIC firmware to complete its reset processing. Not all NIC firmware supports this feature. [bhelgaas: commit log] Link: https://support.huawei.com/enterprise/en/doc/EDOC1100063073/87950645/vm-oss-occasionally-fail-to-load-the-in200-driver-when-the-vf-performs-flr Link: https://lore.kernel.org/r/20210414132301.1793-1-chiqijun@huawei.com Signed-off-by: Chiqijun <chiqijun@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Cc: stable@vger.kernel.org
2021-06-18PCI: Mark some NVIDIA GPUs to avoid bus resetShanker Donthineni1-0/+12
Some NVIDIA GPU devices do not work with SBR. Triggering SBR leaves the device inoperable for the current system boot. It requires a system hard-reboot to get the GPU device back to normal operating condition post-SBR. For the affected devices, enable NO_BUS_RESET quirk to avoid the issue. This issue will be fixed in the next generation of hardware. Link: https://lore.kernel.org/r/20210608054857.18963-8-ameynarkhede03@gmail.com Signed-off-by: Shanker Donthineni <sdonthineni@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Sinan Kaya <okaya@kernel.org> Cc: stable@vger.kernel.org
2021-06-18PCI: Mark TI C667X to avoid bus resetAntti Järvinen1-0/+10
Some TI KeyStone C667X devices do not support bus/hot reset. The PCIESS automatically disables LTSSM when Secondary Bus Reset is received and device stops working. Prevent bus reset for these devices. With this change, the device can be assigned to VMs with VFIO, but it will leak state between VMs. Reference: https://e2e.ti.com/support/processors/f/791/t/954382 Link: https://lore.kernel.org/r/20210315102606.17153-1-antti.jarvinen@gmail.com Signed-off-by: Antti Järvinen <antti.jarvinen@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com> Cc: stable@vger.kernel.org
2021-06-07PCI: Leave Apple Thunderbolt controllers on for s2idle or standbyKonstantin Kharlamov1-0/+11
On Macbook 2013, resuming from suspend-to-idle or standby resulted in the external monitor no longer being detected, a stacktrace, and errors like this in dmesg: pcieport 0000:06:00.0: can't change power state from D3hot to D0 (config space inaccessible) The reason is that we know how to turn power to the Thunderbolt controller *off* via the SXIO/SXFP/SXLF methods, but we don't know how to turn power back on. We have to rely on firmware to turn the power back on. When going to the "suspend-to-idle" or "standby" system sleep states, firmware is not involved either on the suspend side or the resume side, so we can't use SXIO/SXFP/SXLF to turn the power off. Skip SXIO/SXFP/SXLF when firmware isn't involved in suspend, e.g., when we're going to the "suspend-to-idle" or "standby" system sleep states. Fixes: 1df5172c5c25 ("PCI: Suspend/resume quirks for Apple thunderbolt") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=212767 Link: https://lore.kernel.org/r/20210520235501.917397-1-Hi-Angel@yandex.ru Signed-off-by: Konstantin Kharlamov <Hi-Angel@yandex.ru> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org
2021-05-24PCI: Work around Huawei Intelligent NIC VF FLR erratumChiqijun1-0/+65
pcie_flr() starts a Function Level Reset (FLR), waits 100ms (the maximum time allowed for FLR completion by PCIe r5.0, sec 6.6.2), and waits for the FLR to complete. It assumes the FLR is complete when a config read returns valid data. When we do an FLR on several Huawei Intelligent NIC VFs at the same time, firmware on the NIC processes them serially. The VF may respond to config reads before the firmware has completed its reset processing. If we bind a driver to the VF (e.g., by assigning the VF to a virtual machine) in the interval between the successful config read and completion of the firmware reset processing, the NIC VF driver may fail to load. Prevent this driver failure by waiting for the NIC firmware to complete its reset processing. Not all NIC firmware supports this feature. [bhelgaas: commit log] Link: https://support.huawei.com/enterprise/en/doc/EDOC1100063073/87950645/vm-oss-occasionally-fail-to-load-the-in200-driver-when-the-vf-performs-flr Link: https://lore.kernel.org/r/20210414132301.1793-1-chiqijun@huawei.com Signed-off-by: Chiqijun <chiqijun@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-24 05:58:01 +0000