summaryrefslogtreecommitdiff
path: root/drivers/pci/hotplug
AgeCommit message (Collapse)AuthorFilesLines
2016-12-24Replace <asm/uaccess.h> with <linux/uaccess.h> globallyLinus Torvalds4-4/+4
This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-16Merge tag 'powerpc-4.10-1' of ↵Linus Torvalds1-1/+9
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Highlights include: - Support for the kexec_file_load() syscall, which is a prereq for secure and trusted boot. - Prevent kernel execution of userspace on P9 Radix (similar to SMEP/PXN). - Sort the exception tables at build time, to save time at boot, and store them as relative offsets to save space in the kernel image & memory. - Allow building the kernel with thin archives, which should allow us to build an allyesconfig once some other fixes land. - Build fixes to allow us to correctly rebuild when changing the kernel endian from big to little or vice versa. - Plumbing so that we can avoid doing a full mm TLB flush on P9 Radix. - Initial stack protector support (-fstack-protector). - Support for dumping the radix (aka. Linux) and hash page tables via debugfs. - Fix an oops in cxl coredump generation when cxl_get_fd() is used. - Freescale updates from Scott: "Highlights include 8xx hugepage support, qbman fixes/cleanup, device tree updates, and some misc cleanup." - Many and varied fixes and minor enhancements as always. Thanks to: Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Anshuman Khandual, Anton Blanchard, Balbir Singh, Bartlomiej Zolnierkiewicz, Christophe Jaillet, Christophe Leroy, Denis Kirjanov, Elimar Riesebieter, Frederic Barrat, Gautham R. Shenoy, Geliang Tang, Geoff Levand, Jack Miller, Johan Hovold, Lars-Peter Clausen, Libin, Madhavan Srinivasan, Michael Neuling, Nathan Fontenot, Naveen N. Rao, Nicholas Piggin, Pan Xinhui, Peter Senna Tschudin, Rashmica Gupta, Rui Teng, Russell Currey, Scott Wood, Simon Guo, Suraj Jitindar Singh, Thiago Jung Bauermann, Tobias Klauser, Vaibhav Jain" [ And thanks to Michael, who took time off from a new baby to get this pull request done. - Linus ] * tag 'powerpc-4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (174 commits) powerpc/fsl/dts: add FMan node for t1042d4rdb powerpc/fsl/dts: add sg_2500_aqr105_phy4 alias on t1024rdb powerpc/fsl/dts: add QMan and BMan nodes on t1024 powerpc/fsl/dts: add QMan and BMan nodes on t1023 soc/fsl/qman: test: use DEFINE_SPINLOCK() powerpc/fsl-lbc: use DEFINE_SPINLOCK() powerpc/8xx: Implement support of hugepages powerpc: get hugetlbpage handling more generic powerpc: port 64 bits pgtable_cache to 32 bits powerpc/boot: Request no dynamic linker for boot wrapper soc/fsl/bman: Use resource_size instead of computation soc/fsl/qe: use builtin_platform_driver powerpc/fsl_pmc: use builtin_platform_driver powerpc/83xx/suspend: use builtin_platform_driver powerpc/ftrace: Fix the comments for ftrace_modify_code powerpc/perf: macros for power9 format encoding powerpc/perf: power9 raw event format encoding powerpc/perf: update attribute_group data structure powerpc/perf: factor out the event format field powerpc/mm/iommu, vfio/spapr: Put pages on VFIO container shutdown ...
2016-12-15Merge tag 'pci-v4.10-changes' of ↵Linus Torvalds6-53/+29
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "PCI changes: - add support for PCI on ARM64 boxes with ACPI. We already had this for theoretical spec-compliant hardware; now we're adding quirks for the actual hardware (Cavium, HiSilicon, Qualcomm, X-Gene) - add runtime PM support for hotplug ports - enable runtime suspend for Intel UHCI that uses platform-specific wakeup signaling - add yet another host bridge registration interface. We hope this is extensible enough to subsume the others - expose device revision in sysfs for DRM - to avoid device conflicts, make sure any VF BAR updates are done before enabling the VF - avoid unnecessary link retrains for ASPM - allow INTx masking on Mellanox devices that support it - allow access to non-standard VPD for Chelsio devices - update Broadcom iProc support for PAXB v2, PAXC v2, inbound DMA, etc - update Rockchip support for max-link-speed - add NVIDIA Tegra210 support - add Layerscape LS1046a support - update R-Car compatibility strings - add Qualcomm MSM8996 support - remove some uninformative bootup messages" * tag 'pci-v4.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (115 commits) PCI: Enable access to non-standard VPD for Chelsio devices (cxgb3) PCI: Expand "VPD access disabled" quirk message PCI: pciehp: Remove loading message PCI: hotplug: Remove hotplug core message PCI: Remove service driver load/unload messages PCI/AER: Log AER IRQ when claiming Root Port PCI/AER: Log errors with PCI device, not PCIe service device PCI/AER: Remove unused version macros PCI/PME: Log PME IRQ when claiming Root Port PCI/PME: Drop unused support for PMEs from Root Complex Event Collectors PCI: Move config space size macros to pci_regs.h x86/platform/intel-mid: Constify mid_pci_platform_pm PCI/ASPM: Don't retrain link if ASPM not possible PCI: iproc: Skip check for legacy IRQ on PAXC buses PCI: pciehp: Leave power indicator on when enabling already-enabled slot PCI: pciehp: Prioritize data-link event over presence detect PCI: rcar: Add gen3 fallback compatibility string for pcie-rcar PCI: rcar: Use gen2 fallback compatibility last PCI: rcar-gen2: Use gen2 fallback compatibility last PCI: rockchip: Move the deassert of pm/aclk/pclk after phy_init() ..
2016-12-12Merge branch 'pci/pm' into nextBjorn Helgaas2-30/+7
* pci/pm: x86/platform/intel-mid: Constify mid_pci_platform_pm PCI: pciehp: Add runtime PM support for PCIe hotplug ports ACPI / hotplug / PCI: Make device_is_managed_by_native_pciehp() public ACPI / hotplug / PCI: Use cached copy of PCI_EXP_SLTCAP_HPC bit PCI: Unfold conditions to block runtime PM on PCIe ports PCI: Consolidate conditions to allow runtime PM on PCIe ports PCI: Activate runtime PM on a PCIe port only if it can suspend PCI: Speed up algorithm in pci_bridge_d3_update() PCI: Autosense device removal in pci_bridge_d3_update() PCI: Don't acquire ref on parent in pci_bridge_d3_update() USB: UHCI: report non-PME wakeup signalling for Intel hardware PCI: Check for PME in targeted sleep state
2016-12-12Merge branch 'pci/misc' into nextBjorn Helgaas2-12/+7
* pci/misc: PCI: Enable access to non-standard VPD for Chelsio devices (cxgb3) PCI: Expand "VPD access disabled" quirk message PCI: pciehp: Remove loading message PCI: hotplug: Remove hotplug core message PCI: Remove service driver load/unload messages PCI/AER: Log AER IRQ when claiming Root Port PCI/AER: Log errors with PCI device, not PCIe service device PCI/AER: Remove unused version macros PCI/PME: Log PME IRQ when claiming Root Port PCI/PME: Drop unused support for PMEs from Root Complex Event Collectors PCI: Move config space size macros to pci_regs.h
2016-12-12PCI: pciehp: Remove loading messageBjorn Helgaas1-5/+4
Remove the "PCI Express Hot Plug Controller Driver" version message. I don't think it contains any useful information. Remove unused #defines and move the author information to a comment. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-12-12PCI: hotplug: Remove hotplug core messageBjorn Helgaas1-7/+3
Remove the "PCI Hot Plug PCI Core" version message. I don't think it contains any useful information. Remove unused #defines and move the author information to a comment. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-12-08PCI: pciehp: Leave power indicator on when enabling already-enabled slotAshok Raj1-1/+1
If an error occurs when enabling a slot, pciehp_power_thread() turns off the power indicator. But if the only error is that the slot was already enabled, we should leave the power indicator on. Return success if called to enable an already-enabled slot. This is in the same spirit of the special handling for EEXISTS when pciehp_configure_device() determines the slot devices already exist. Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com>
2016-12-07PCI: pciehp: Prioritize data-link event over presence detectAshok Raj1-9/+12
If Slot Status indicates changes in both Data Link Layer Status and Presence Detect, prioritize the Link status change. When both events are observed, pciehp currently relies on the Slot Status Presence Detect State (PDS) to agree with the Link Status Data Link Layer Active status. The Presence Detect State, however, may be set to 1 through out-of-band presence detect even if the link is down, which creates conflicting events. Since the Link Status accurately reflects the reachability of the downstream bus, the Link Status event should take precedence over a Presence Detect event. Skip checking the PDC status if we handled a link event in the same handler. Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com>
2016-11-23PCI: cpqphp: Add missing call to pci_disable_device()Quentin Lambert1-1/+2
Most error branches following the call to pci_enable_device() contain a call to pci_disable_device(). Add these calls where they are missing. This issue was found with Hector. Signed-off-by: Quentin Lambert <lambert.quentin@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-11-17PCI: pciehp: Add runtime PM support for PCIe hotplug portsLukas Wunner1-0/+6
Linux 4.8 added support for runtime suspending PCIe ports to D3hot with commit 006d44e49a25 ("PCI: Add runtime PM support for PCIe ports"), but excluded hotplug ports. Those are now afforded runtime PM by the present commit. Hotplug ports require a few extra considerations: - The configuration space of the port remains accessible in D3hot, so all the functions to read or modify the Slot Status and Slot Control registers need not be modified. Even turning on slot power doesn't seem to require the port to be in D0, at least the PCIe spec doesn't say so and I confirmed that by testing with a Thunderbolt controller. - However D0 is required to access devices on the secondary bus. This happens in pciehp_check_link_status() and pciehp_configure_device() (both called from board_added()) and in pciehp_unconfigure_device() (called from remove_board()), so acquire a runtime PM ref for their invocation. - The hotplug port stays active as long as it has active children. If all hotplugged devices below the port runtime suspend, the port is allowed to runtime suspend as well. Plug and unplug detection continues to work in D3hot. - Hotplug interrupts are delivered in-band, so while the hotplug port itself is allowed to go to D3hot, its parent ports must stay in D0 for interrupts to come through. Add a corresponding restriction to pci_dev_check_d3cold(). - Runtime PM may only be allowed if the hotplug port is handled natively by the OS. On ACPI systems, the port may alternatively be handled by the firmware and things break if the OS puts the port into D3 behind the firmware's back: E.g. Thunderbolt hotplug ports on non-Macs are handled by Intel's firmware in System Management Mode and the firmware is known to access devices on the port's secondary bus without checking first if the port is in D0: https://bugzilla.kernel.org/show_bug.cgi?id=53811 Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> CC: Mika Westerberg <mika.westerberg@linux.intel.com>
2016-11-17ACPI / hotplug / PCI: Make device_is_managed_by_native_pciehp() publicLukas Wunner1-27/+1
We're about to add runtime PM of hotplug ports, but we need to restrict it to ports that are handled natively by the OS: If they're handled by the firmware (which is the case for Thunderbolt on non-Macs), things would break if the OS put the ports into D3hot behind the firmware's back. To determine if a hotplug port is handled natively, one has to walk up from the port to the root bridge and check the cached _OSC Control Field for the value of the "PCI Express Native Hot Plug control" bit. There's already a function to do that, device_is_managed_by_native_pciehp(), but it's private to drivers/pci/hotplug/acpiphp_glue.c and only compiled in if CONFIG_HOTPLUG_PCI_ACPI is enabled. Make it public and move it to drivers/pci/pci-acpi.c, so that it is available in the more general CONFIG_ACPI case. The function contains a check if the device in question is a hotplug port and returns false if it's not. The caller we're going to add doesn't need this as it only calls the function if it actually *is* a hotplug port. Move the check out of the function into the single existing caller. Rename it to pciehp_is_native() and add some kerneldoc and polish. No functional change intended. Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-17ACPI / hotplug / PCI: Use cached copy of PCI_EXP_SLTCAP_HPC bitLukas Wunner1-4/+1
We cache the PCI_EXP_SLTCAP_HPC bit in pci_dev->is_hotplug_bridge on device probe, so there's no need to read it again when adding the ACPI hotplug context. Here's the call chain to prove that no ordering issue is introduced: pci_scan_child_bus [drivers/pci/probe.c] pci_scan_slot pci_scan_single_device pci_scan_device pci_setup_device set_pcie_hotplug_bridge [is_hotplug_bridge bit is set here] pci_scan_bridge pci_add_new_bus pci_alloc_child_bus pcibios_add_bus [arch/(x86|arm64|ia64)/...] acpi_pci_add_bus [drivers/pci/pci-acpi.c] acpiphp_enumerate_slots [drivers/pci/hotplug/acpiphp_glue.c] acpiphp_add_context device_is_managed_by_native_pciehp [is_hotplug_bridge bit is queried here] No functional change intended. Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-14powerpc/pci/rpadlpar: Fix device reference leaksJohan Hovold1-1/+9
Make sure to drop any device reference taken by vio_find_node() when adding and removing virtual I/O slots. Fixes: 5eeb8c63a38f ("[PATCH] PCI Hotplug: rpaphp: Move VIO registration") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-10-31s390: hotplug: make pci_hpc explicitly non-modularPaul Gortmaker1-5/+2
The Kconfig currently controlling compilation of this code is: drivers/pci/hotplug/Kconfig:config HOTPLUG_PCI_S390 drivers/pci/hotplug/Kconfig: bool "System z PCI Hotplug Support" ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modular infrastructure use, so that when reading the driver there is no doubt it is builtin-only. We also delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. We don't exchange module.h for init.h or export.h since the file does not contain any initcalls or EXPORT of symbols. Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: linux-s390@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-10-07Merge tag 'powerpc-4.9-1' of ↵Linus Torvalds1-34/+249
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Highlights: - Major rework of Book3S 64-bit exception vectors (Nicholas Piggin) - Use gas sections for arranging exception vectors et. al. - Large set of TM cleanups and selftests (Cyril Bur) - Enable transactional memory (TM) lazily for userspace (Cyril Bur) - Support for XZ compression in the zImage wrapper (Oliver O'Halloran) - Add support for bpf constant blinding (Naveen N. Rao) - Beginnings of upstream support for PA Semi Nemo motherboards (Darren Stevens) Fixes: - Ensure .mem(init|exit).text are within _stext/_etext (Michael Ellerman) - xmon: Don't use ld on 32-bit (Michael Ellerman) - vdso64: Use double word compare on pointers (Anton Blanchard) - powerpc/nvram: Fix an incorrect partition merge (Pan Xinhui) - powerpc: Fix usage of _PAGE_RO in hugepage (Christophe Leroy) - powerpc/mm: Update FORCE_MAX_ZONEORDER range to allow hugetlb w/4K (Aneesh Kumar K.V) - Fix memory leak in queue_hotplug_event() error path (Andrew Donnellan) - Replay hypervisor maintenance interrupt first (Nicholas Piggin) Various performance optimisations (Anton Blanchard): - Align hot loops of memset() and backwards_memcpy() - During context switch, check before setting mm_cpumask - Remove static branch prediction in atomic{, 64}_add_unless - Only disable HAVE_EFFICIENT_UNALIGNED_ACCESS on POWER7 little endian - Set default CPU type to POWER8 for little endian builds Cleanups & features: - Sparse fixes/cleanups (Daniel Axtens) - Preserve CFAR value on SLB miss caused by access to bogus address (Paul Mackerras) - Radix MMU fixups for POWER9 (Aneesh Kumar K.V) - Support for setting used_(vsr|vr|spe) in sigreturn path (for CRIU) (Simon Guo) - Optimise syscall entry for virtual, relocatable case (Nicholas Piggin) - Optimise MSR handling in exception handling (Nicholas Piggin) - Support for kexec with Radix MMU (Benjamin Herrenschmidt) - powernv EEH fixes (Russell Currey) - Suprise PCI hotplug support for powernv (Gavin Shan) - Endian/sparse fixes for powernv PCI (Gavin Shan) - Defconfig updates (Anton Blanchard) - KVM: PPC: Book3S HV: Migrate pinned pages out of CMA (Balbir Singh) - cxl: Flush PSL cache before resetting the adapter (Frederic Barrat) - cxl: replace loop with for_each_child_of_node(), remove unneeded of_node_put() (Andrew Donnellan) - Fix HV facility unavailable to use correct handler (Nicholas Piggin) - Remove unnecessary syscall trampoline (Nicholas Piggin) - fadump: Fix build break when CONFIG_PROC_VMCORE=n (Michael Ellerman) - Quieten EEH message when no adapters are found (Anton Blanchard) - powernv: Add PHB register dump debugfs handle (Russell Currey) - Use kprobe blacklist for exception handlers & asm functions (Nicholas Piggin) - Document the syscall ABI (Nicholas Piggin) - MAINTAINERS: Update cxl maintainers (Michael Neuling) - powerpc: Remove all usages of NO_IRQ (Michael Ellerman) Minor cleanups: - Andrew Donnellan, Christophe Leroy, Colin Ian King, Cyril Bur, Frederic Barrat, Pan Xinhui, PrasannaKumar Muralidharan, Rui Teng, Simon Guo" * tag 'powerpc-4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (156 commits) powerpc/bpf: Add support for bpf constant blinding powerpc/bpf: Implement support for tail calls powerpc/bpf: Introduce accessors for using the tmp local stack space powerpc/fadump: Fix build break when CONFIG_PROC_VMCORE=n powerpc: tm: Enable transactional memory (TM) lazily for userspace powerpc/tm: Add TM Unavailable Exception powerpc: Remove do_load_up_transact_{fpu,altivec} powerpc: tm: Rename transct_(*) to ck(\1)_state powerpc: tm: Always use fp_state and vr_state to store live registers selftests/powerpc: Add checks for transactional VSXs in signal contexts selftests/powerpc: Add checks for transactional VMXs in signal contexts selftests/powerpc: Add checks for transactional FPUs in signal contexts selftests/powerpc: Add checks for transactional GPRs in signal contexts selftests/powerpc: Check that signals always get delivered selftests/powerpc: Add TM tcheck helpers in C selftests/powerpc: Allow tests to extend their kill timeout selftests/powerpc: Introduce GPR asm helper header file selftests/powerpc: Move VMX stack frame macros to header file selftests/powerpc: Rework FPU stack placement macros and move to header file selftests/powerpc: Check for VSX preservation across userspace preemption ...
2016-10-04drivers/pci/hotplug: Use of_property_read_u32() in powernv driverGavin Shan1-9/+10
This replaces of_get_property() with of_property_read_u32() or of_property_read_string() so that we needn't consider the endian issue, the returned value always is in CPU-endian. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> [mpe: Fold in the change to the "ibm,slot-surprise-pluggable" case] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-10-03Merge branch 'pci/hotplug' into nextBjorn Helgaas4-95/+116
* pci/hotplug: x86/PCI: VMD: Request userspace control of PCIe hotplug indicators PCI: pciehp: Allow exclusive userspace control of indicators PCI: pciehp: Remove useless pciehp_get_latch_status() calls PCI: pciehp: Clean up dmesg "Slot(%s)" messages PCI: pciehp: Remove unnecessary guard PCI: pciehp: Don't re-read Slot Status when handling surprise event PCI: pciehp: Don't re-read Slot Status when queuing hotplug event PCI: pciehp: Process all hotplug events before looking for new ones PCI: pciehp: Return IRQ_NONE when we can't read interrupt status PCI: pciehp: Rename pcie_isr() locals for clarity PCI: pciehp: Clear attention LED on device add
2016-09-29drivers/pci/hotplug: Support surprise hotplug in powernv driverGavin Shan1-0/+214
This supports PCI surprise hotplug. The design is highlighted as below: * The PCI slot's surprise hotplug capability is exposed through device node property "ibm,slot-surprise-pluggable", meaning PCI surprise hotplug will be disabled if skiboot doesn't support it yet. * The interrupt because of presence or link state change is raised on surprise hotplug event. One event is allocated and queued to the PCI slot for workqueue to pick it up and process in serialized fashion. The code flow for surprise hotplug is same to that for managed hotplug except: the affected PEs are put into frozen state to avoid unexpected EEH error reporting in surprise hot remove path. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-09-29drivers/pci/hotplug: Remove likely() and unlikely() in powernv driverGavin Shan1-28/+28
This removes likely() and unlikely() in pnv_php.c as the code isn't running in hot path. Those macros to affect CPU's branch stream don't help a lot for performance. I used them to identify the cases are likely or unlikely to happen. No logical changes introduced. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-09-22PCI: pciehp: Allow exclusive userspace control of indicatorsKeith Busch3-0/+33
PCIe hotplug supports optional Attention and Power Indicators, which are used internally by pciehp. Users can't control the Power Indicator, but they can control the Attention Indicator by writing to a sysfs "attention" file. The Slot Control register has two bits for each indicator, and the PCIe spec defines the encodings for each as (Reserved/On/Blinking/Off). For sysfs "attention" writes, pciehp_set_attention_status() maps into these encodings, so the only useful write values are 0 (Off), 1 (On), and 2 (Blinking). However, some platforms use all four bits for platform-specific indicators, and they need to allow direct user control of them while preventing pciehp from using them at all. Add a "hotplug_user_indicators" flag to the pci_dev structure. When set, pciehp does not use either the Attention Indicator or the Power Indicator, and the low four bits (values 0x0 - 0xf) of sysfs "attention" write values are written directly to the Attention Indicator Control and Power Indicator Control fields. [bhelgaas: changelog, rename flag and accessors to s/attention/indicator/] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-09-14PCI: pciehp: Remove useless pciehp_get_latch_status() callsBjorn Helgaas1-8/+1
Long ago, we updated a "switch_save" field based on the latch status. But switch_save was unused, and ed6cbcf2ac70 ("[PATCH] pciehp: miscellaneous cleanups") removed it. We no longer use the latch status, so remove calls to pciehp_get_latch_status(). No functional change intended. Tested-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2016-09-14PCI: pciehp: Clean up dmesg "Slot(%s)" messagesBjorn Helgaas2-35/+33
Print slot name consistently as "Slot(%s)". I don't know whether that's ideal, but we can at least do it the same way all the time. No functional change intended. Tested-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2016-09-14PCI: pciehp: Remove unnecessary guardBjorn Helgaas1-3/+0
In pcie_isr(), we return early if no status bits other than PCI_EXP_SLTSTA_CC are set. This was introduced by dbd79aed1aea ("pciehp: fix NULL dereference in interrupt handler"), but it is no longer necessary because all the subsequent pcie_isr() code is already predicated on a status bit being set. Remove the unnecessary test for ~PCI_EXP_SLTSTA_CC. No functional change intended. Tested-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2016-09-14PCI: pciehp: Don't re-read Slot Status when handling surprise eventMayurkumar Patel1-16/+2
Previously we read Slot Status when handling a surprise event. But Slot Status might have changed since we identified the event, and the event_type already tells us whether to enable or disable the slot, so there's no need to read it again. Remove handle_surprise_event() and queue the power work directly. [bhelgaas: changelog] Tested-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Mayurkumar Patel <mayurkumar.patel@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Rajat Jain <rajatxjain@gmail.com>
2016-09-14PCI: pciehp: Don't re-read Slot Status when queuing hotplug eventMayurkumar Patel1-2/+5
Previously we read Slot Status to learn about hotplug events, then cleared the events, then re-read Slot Status to find out what happened. But Slot Status might have changed before the second read. Capture the Slot Status once before clearing the events. Also capture the Link Status if we had a link status change. [bhelgaas: changelog, split to separate patch] Tested-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Mayurkumar Patel <mayurkumar.patel@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2016-09-14PCI: pciehp: Process all hotplug events before looking for new onesMayurkumar Patel1-26/+32
Previously we accumulated hotplug events, then processed them, essentially like this: events = 0 do { status = read(Slot Status) status &= EVENT_MASK # only look at events events |= status # accumulate events write(Slot Status, events) # clear events } while (status) process events The problem is that as soon as we clear events in Slot Status, the hardware may send notifications for new events, and we lose information about the first events. For example, we might see two Presence Detect Changed events, but lose the fact that the slot was temporarily empty: read PCI_EXP_SLTSTA_PDC set, PCI_EXP_SLTSTA_PDS clear # slot empty write PCI_EXP_SLTSTA_PDC # clear PDC event read PCI_EXP_SLTSTA_PDC set, PCI_EXP_SLTSTA_PDS set # slot occupied The current code does not process a removal; it only processes the insertion, which fails because we didn't remove the original device. To avoid this problem, read Slot Status once and process all the events before reading it again, like this: do { read events clear events process events } while (events) [bhelgaas: changelog, add external loop around pciehp_isr()] Tested-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Mayurkumar Patel <mayurkumar.patel@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2016-09-14PCI: pciehp: Return IRQ_NONE when we can't read interrupt statusBjorn Helgaas1-1/+1
After 1469d17dd341 ("PCI: pciehp: Handle invalid data when reading from non-existent devices"), we returned IRQ_HANDLED when we failed to read interrupt status from the bridge. I think it's better to return IRQ_NONE, as we do in other cases where there's no interrupt pending. This will facilitate refactoring the loop in pcie_isr(): we'll be able to call the ISR in a loop as long as it returns IRQ_HANDLED. Return IRQ_NONE if we couldn't read interrupt status. Tested-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2016-09-12PCI: pciehp: Rename pcie_isr() locals for clarityBjorn Helgaas1-21/+25
Rename "detected" and "intr_loc" to "status" and "events" for clarity. "status" is the value we read from the Slot Status register; "events" is the set of hot-plug events we need to process. No functional change intended. Tested-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2016-08-24PCI: pciehp: Make explicitly non-modularPaul Gortmaker1-15/+5
This code is not being built as a module by anyone: obj-$(CONFIG_HOTPLUG_PCI_PCIE) += pciehp.o pciehp-objs := pciehp_core.o \ drivers/pci/pcie/Kconfig:config HOTPLUG_PCI_PCIE drivers/pci/pcie/Kconfig: bool "PCI Express Hotplug driver" Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(), etc., so that when reading the driver there is no doubt it is builtin-only. The information is preserved in comments at the top of the file. Note that for non-modular code, module_init() translates to device_initcall(). One could argue that we should use subsys_initcall() here, but for now we stick with runtime equivalence. We delete module.h but we keep the moduleparam.h include, since we are keeping the module_param() that the file has as-is for now. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Kristen Carlson Accardi <kristen@linux.intel.com>
2016-08-24PCI: hotplug: Make core explicitly non-modularPaul Gortmaker3-24/+6
This code is not being built as a module by anyone: obj-$(CONFIG_HOTPLUG_PCI) += pci_hotplug.o [...] pci_hotplug-objs := pci_hotplug_core.o drivers/pci/hotplug/Kconfig:menuconfig HOTPLUG_PCI drivers/pci/hotplug/Kconfig: bool "Support for PCI Hotplug" Remove uses of MODULE_DESCRIPTION(), MODULE_AUTHOR(), MODULE_LICENSE(), etc., so that when reading the driver there is no doubt it is builtin-only. The information is preserved in comments at the top of the file. Remove orphaned exit function in cpci_hotplug_core.c. Note that for non-modular code, module_init() translates to device_initcall(). One could argue that we should use subsys_initcall() here, but for now we stick with runtime equivalence. We would delete module.h and just keep the moduleparam.h include (since the file does use module_param), but there is a try_module_get and module_put pairing that prevents us from doing that. [bhelgaas: changelog] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Scott Murray <scott@spiteful.org> CC: Kristen Carlson Accardi <kristen@linux.intel.com>
2016-08-22PCI: pciehp: Clear attention LED on device addKeith Busch1-0/+1
Clear the LED attention status after a successful device add. It is possible the attention LED was on from a previous power fault or link failure, and a subsequent successful device insert insertion should clear it. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-08-04ACPI / hotplug / PCI: Runtime resume bridges before bus rescansRafael J. Wysocki1-0/+6
If a PCI bridge (or PCIe port) that is runtime-suspended gets an ACPI hotplug notification, such as a bus check, it has to be resumed before re-scanning the devices below it, or those devices will not be accessible and will be treated as hot-removed. Make that happen and let the bridge suspend again after the bus below it has been re-scanned. This is a replacement for commit 16468c783cb4 ("ACPI / hotplug / PCI: Runtime resume bridge before rescan") that has been reverted, because it introduced a system resume regression (due to missing bridge->pci_dev checks that are necessary in case the notification is targeted at the host bridge) and it is necessary for the code added by commit 006d44e49a25 ("PCI: Add runtime PM support for PCIe ports") to work as expected. Tested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03Revert "ACPI / hotplug / PCI: Runtime resume bridge before rescan"Linus Torvalds1-4/+0
This reverts commit 16468c783cb4cf72475dcda23fabecb4a4bb0e17. Bisection showed that it was the root cause for a resume hang on a bog-standard all-Intel laptop (Sony Vaio Pro 11), and reverting fixes the hang. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-02Merge tag 'pci-v4.8-changes' of ↵Linus Torvalds2-0/+8
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Highlights: - ARM64 support for ACPI host bridges - new drivers for Axis ARTPEC-6 and Marvell Aardvark - new pci_alloc_irq_vectors() interface for MSI-X, MSI, legacy INTx - pci_resource_to_user() cleanup (more to come) Detailed summary: Enumeration: - Move ecam.h to linux/include/pci-ecam.h (Jayachandran C) - Add parent device field to ECAM struct pci_config_window (Jayachandran C) - Add generic MCFG table handling (Tomasz Nowicki) - Refactor pci_bus_assign_domain_nr() for CONFIG_PCI_DOMAINS_GENERIC (Tomasz Nowicki) - Factor DT-specific pci_bus_find_domain_nr() code out (Tomasz Nowicki) Resource management: - Add devm_request_pci_bus_resources() (Bjorn Helgaas) - Unify pci_resource_to_user() declarations (Bjorn Helgaas) - Implement pci_resource_to_user() with pcibios_resource_to_bus() (microblaze, powerpc, sparc) (Bjorn Helgaas) - Request host bridge window resources (designware, iproc, rcar, xgene, xilinx, xilinx-nwl) (Bjorn Helgaas) - Make PCI I/O space optional on ARM32 (Bjorn Helgaas) - Ignore write combining when mapping I/O port space (Bjorn Helgaas) - Claim bus resources on MIPS PCI_PROBE_ONLY set-ups (Bjorn Helgaas) - Remove unicore32 pci=firmware command line parameter handling (Bjorn Helgaas) - Support I/O resources when parsing host bridge resources (Jayachandran C) - Add helpers to request/release memory and I/O regions (Johannes Thumshirn) - Use pci_(request|release)_mem_regions (NVMe, lpfc, GenWQE, ethernet/intel, alx) (Johannes Thumshirn) - Extend pci=resource_alignment to specify device/vendor IDs (Koehrer Mathias (ETAS/ESW5)) - Add generic pci_bus_claim_resources() (Lorenzo Pieralisi) - Claim bus resources on ARM32 PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi) - Remove ARM32 and ARM64 arch-specific pcibios_enable_device() (Lorenzo Pieralisi) - Add pci_unmap_iospace() to unmap I/O resources (Sinan Kaya) - Remove powerpc __pci_mmap_set_pgprot() (Yinghai Lu) PCI device hotplug: - Allow additional bus numbers for hotplug bridges (Keith Busch) - Ignore interrupts during D3cold (Lukas Wunner) Power management: - Enforce type casting for pci_power_t (Andy Shevchenko) - Don't clear d3cold_allowed for PCIe ports (Mika Westerberg) - Put PCIe ports into D3 during suspend (Mika Westerberg) - Power on bridges before scanning new devices (Mika Westerberg) - Runtime resume bridge before rescan (Mika Westerberg) - Add runtime PM support for PCIe ports (Mika Westerberg) - Remove redundant check of pcie_set_clkpm (Shawn Lin) Virtualization: - Add function 1 DMA alias quirk for Marvell 88SE9182 (Aaron Sierra) - Add DMA alias quirk for Adaptec 3805 (Alex Williamson) - Mark Atheros AR9485 and QCA9882 to avoid bus reset (Chris Blake) - Add ACS quirk for Solarflare SFC9220 (Edward Cree) MSI: - Fix PCI_MSI dependencies (Arnd Bergmann) - Add pci_msix_desc_addr() helper (Christoph Hellwig) - Switch msix_program_entries() to use pci_msix_desc_addr() (Christoph Hellwig) - Make the "entries" argument to pci_enable_msix() optional (Christoph Hellwig) - Provide sensible IRQ vector alloc/free routines (Christoph Hellwig) - Spread interrupt vectors in pci_alloc_irq_vectors() (Christoph Hellwig) Error Handling: - Bind DPC to Root Ports as well as Downstream Ports (Keith Busch) - Remove DPC tristate module option (Keith Busch) - Convert Downstream Port Containment driver to use devm_* functions (Mika Westerberg) Generic host bridge driver: - Select IRQ_DOMAIN (Arnd Bergmann) - Claim bus resources on PCI_PROBE_ONLY set-ups (Lorenzo Pieralisi) ACPI host bridge driver: - Add ARM64 acpi_pci_bus_find_domain_nr() (Tomasz Nowicki) - Add ARM64 ACPI support for legacy IRQs parsing and consolidation with DT code (Tomasz Nowicki) - Implement ARM64 AML accessors for PCI_Config region (Tomasz Nowicki) - Support ARM64 ACPI-based PCI host controller (Tomasz Nowicki) Altera host bridge driver: - Check link status before retrain link (Ley Foon Tan) - Poll for link up status after retraining the link (Ley Foon Tan) Axis ARTPEC-6 host bridge driver: - Add PCI_MSI_IRQ_DOMAIN dependency (Arnd Bergmann) - Add DT binding for Axis ARTPEC-6 PCIe controller (Niklas Cassel) - Add Axis ARTPEC-6 PCIe controller driver (Niklas Cassel) Intel VMD host bridge driver: - Use lock save/restore in interrupt enable path (Jon Derrick) - Select device dma ops to override (Keith Busch) - Initialize list item in IRQ disable (Keith Busch) - Use x86_vector_domain as parent domain (Keith Busch) - Separate MSI and MSI-X vector sharing (Keith Busch) Marvell Aardvark host bridge driver: - Add DT binding for the Aardvark PCIe controller (Thomas Petazzoni) - Add Aardvark PCI host controller driver (Thomas Petazzoni) - Add Aardvark PCIe support for Armada 3700 (Thomas Petazzoni) Microsoft Hyper-V host bridge driver: - Fix interrupt cleanup path (Cathy Avery) - Don't leak buffer in hv_pci_onchannelcallback() (Vitaly Kuznetsov) - Handle all pending messages in hv_pci_onchannelcallback() (Vitaly Kuznetsov) NVIDIA Tegra host bridge driver: - Program PADS_REFCLK_CFG* always, not just on legacy SoCs (Stephen Warren) - Program PADS_REFCLK_CFG* registers with per-SoC values (Stephen Warren) - Use lower-case hex consistently for register definitions (Thierry Reding) - Use generic pci_remap_iospace() rather than ARM32-specific one (Thierry Reding) - Stop setting pcibios_min_mem (Thierry Reding) Renesas R-Car host bridge driver: - Drop gen2 dummy I/O port region (Bjorn Helgaas) TI DRA7xx host bridge driver: - Fix return value in case of error (Christophe JAILLET) Xilinx AXI host bridge driver: - Fix return value in case of error (Christophe JAILLET) Miscellaneous: - Make bus_attr_resource_alignment static (Ben Dooks) - Include <asm/dma.h> for isa_dma_bridge_buggy (Ben Dooks) - MAINTAINERS: Add file patterns for PCI device tree bindings (Geert Uytterhoeven) - Make host bridge drivers explicitly non-modular (Paul Gortmaker)" * tag 'pci-v4.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (125 commits) PCI: xgene: Make explicitly non-modular PCI: thunder-pem: Make explicitly non-modular PCI: thunder-ecam: Make explicitly non-modular PCI: tegra: Make explicitly non-modular PCI: rcar-gen2: Make explicitly non-modular PCI: rcar: Make explicitly non-modular PCI: mvebu: Make explicitly non-modular PCI: layerscape: Make explicitly non-modular PCI: keystone: Make explicitly non-modular PCI: hisi: Make explicitly non-modular PCI: generic: Make explicitly non-modular PCI: designware-plat: Make it explicitly non-modular PCI: artpec6: Make explicitly non-modular PCI: armada8k: Make explicitly non-modular PCI: artpec: Add PCI_MSI_IRQ_DOMAIN dependency PCI: Add ACS quirk for Solarflare SFC9220 arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700 PCI: aardvark: Add Aardvark PCI host controller driver dt-bindings: add DT binding for the Aardvark PCIe controller PCI: tegra: Program PADS_REFCLK_CFG* registers with per-SoC values ...
2016-07-20PCI: rpaphp: Fix slot registration for multiple slots under a PHBTyrel Datwyler1-5/+12
The underlying slot hotplug registration code assumed multiple slots, but the actual implementation is broken for multiple slots. This went unnoticed for years do to the fact that PowerVM seems to only ever provide a single hotplug slot per PHB. Under qemu/kvm the hotplug slot model aligns more with x86 where multiple slots are presented under a single PHB. As seen in the following each additional slot after the first fails to register due to each slot always being compared against the first child node of the PHB in the device tree. rpaphp: RPA HOT Plug PCI Controller Driver version: 0.1 rpaphp: Slot [Slot 0] registered rpaphp: pci_hp_register failed with error -16 rpaphp: pci_hp_register failed with error -16 rpaphp: pci_hp_register failed with error -16 rpaphp: pci_hp_register failed with error -16 The registration logic is fixed so that each slot is compared against the existing child devices of the PHB in the device tree to determine present slots vs empty slots. rpaphp: RPA HOT Plug PCI Controller Driver version: 0.1 rpaphp: Slot [C0] registered rpaphp: Slot [C1] registered rpaphp: Slot [C2] registered rpaphp: Slot [C3] registered rpaphp: Slot [C4] registered Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> [mpe: Massage changelog] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-14PCI/hotplug: pnv_php: handle OPAL_PCI_SLOT_OFFLINE power stateAndrew Donnellan1-1/+1
When calling pnv_php_set_slot_power_state() with state == OPAL_PCI_SLOT_OFFLINE, remove devices from the device tree as if we're dealing with OPAL_PCI_SLOT_POWER_OFF. Cc: Gavin Shan <gwshan@linux.vnet.ibm.com> Cc: linux-pci@vger.kernel.org Cc: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-14PCI/hotplug: pnv_php: export symbols and move struct types needed by cxlAndrew Donnellan1-27/+5
The cxl driver will use infrastructure from pnv_php to handle device tree updates when switching bi-modal CAPI cards into CAPI mode. To enable this, export pnv_php_find_slot() and pnv_php_set_slot_power_state(), and add corresponding declarations, as well as the definition of struct pnv_php_slot, to asm/pnv-pci.h. Cc: Gavin Shan <gwshan@linux.vnet.ibm.com> Cc: linux-pci@vger.kernel.org Cc: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-06-21PCI/hotplug: PowerPC PowerNV PCI hotplug driverGavin Shan3-0/+749
This adds standalone driver to support PCI hotplug for PowerPC PowerNV platform that runs on top of skiboot firmware. The firmware identifies hotpluggable slots and marked their device tree node with proper "ibm,slot-pluggable" and "ibm,reset-by-firmware". The driver scans device tree nodes to create/register PCI hotplug slot accordingly. The PCI slots are organized in fashion of tree, which means one PCI slot might have parent PCI slot and parent PCI slot possibly contains multiple child PCI slots. At the plugging time, the parent PCI slot is populated before its children. The child PCI slots are removed before their parent PCI slot can be removed from the system. If the skiboot firmware doesn't support slot status retrieval, the PCI slot device node shouldn't have property "ibm,reset-by-firmware". In that case, none of valid PCI slots will be detected from device tree. The skiboot firmware doesn't export the capability to access attention LEDs yet and it's something for TBD. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-06-20PCI: pciehp: Ignore interrupts during D3coldLukas Wunner1-0/+4
If a hotplug port is suspended to D3cold, its slot status register cannot be read. If that hotplug port happens to share its IRQ with other devices, whenever an interrupt occurs for one of these devices, pciehp logs a "no response from device" message and tries to read the PCI_EXP_SLTSTA register, even though we know that will fail. Ignore interrupts while we're in D3cold. [bhelgaas: changelog] Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-06-13ACPI / hotplug / PCI: Runtime resume bridge before rescanMika Westerberg1-0/+4
If a PCI bridge (or PCIe port) that is runtime suspended gets an ACPI hotplug event, such as BUS_CHECK we need to make sure it is resumed before devices below the bridge are re-scanned. Otherwise the devices behind the port are not accessible and will be treated as hot-unplugged. To fix this, resume PCI bridges from runtime suspend while rescanning. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-05-20Merge tag 'powerpc-4.7-1' of ↵Linus Torvalds3-8/+8
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Highlights: - Support for Power ISA 3.0 (Power9) Radix Tree MMU from Aneesh Kumar K.V - Live patching support for ppc64le (also merged via livepatching.git) Various cleanups & minor fixes from: - Aaro Koskinen, Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Chris Smart, Daniel Axtens, Frederic Barrat, Gavin Shan, Ian Munsie, Lennart Sorensen, Madhavan Srinivasan, Mahesh Salgaonkar, Markus Elfring, Michael Ellerman, Oliver O'Halloran, Paul Gortmaker, Paul Mackerras, Rashmica Gupta, Russell Currey, Suraj Jitindar Singh, Thiago Jung Bauermann, Valentin Rothberg, Vipin K Parashar. General: - Update LMB associativity index during DLPAR add/remove from Nathan Fontenot - Fix branching to OOL handlers in relocatable kernel from Hari Bathini - Add support for userspace Power9 copy/paste from Chris Smart - Always use STRICT_MM_TYPECHECKS from Michael Ellerman - Add mask of possible MMU features from Michael Ellerman PCI: - Enable pass through of NVLink to guests from Alexey Kardashevskiy - Cleanups in preparation for powernv PCI hotplug from Gavin Shan - Don't report error in eeh_pe_reset_and_recover() from Gavin Shan - Restore initial state in eeh_pe_reset_and_recover() from Gavin Shan - Revert "powerpc/eeh: Fix crash in eeh_add_device_early() on Cell" from Guilherme G Piccoli - Remove the dependency on EEH struct in DDW mechanism from Guilherme G Piccoli selftests: - Test cp_abort during context switch from Chris Smart - Add several tests for transactional memory support from Rashmica Gupta perf: - Add support for sampling interrupt register state from Anju T - Add support for unwinding perf-stackdump from Chandan Kumar cxl: - Configure the PSL for two CAPI ports on POWER8NVL from Philippe Bergheaud - Allow initialization on timebase sync failures from Frederic Barrat - Increase timeout for detection of AFU mmio hang from Frederic Barrat - Handle num_of_processes larger than can fit in the SPA from Ian Munsie - Ensure PSL interrupt is configured for contexts with no AFU IRQs from Ian Munsie - Add kernel API to allow a context to operate with relocate disabled from Ian Munsie - Check periodically the coherent platform function's state from Christophe Lombard Freescale: - Updates from Scott: "Contains 86xx fixes, minor device tree fixes, an erratum workaround, and a kconfig dependency fix." * tag 'powerpc-4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (192 commits) powerpc/86xx: Fix PCI interrupt map definition powerpc/86xx: Move pci1 definition to the include file powerpc/fsl: Fix build of the dtb embedded kernel images powerpc/fsl: Fix rcpm compatible string powerpc/fsl: Remove FSL_SOC dependency from FSL_LBC powerpc/fsl-pci: Add a workaround for PCI 5 errata powerpc/fsl: Fix SPI compatible on t208xrdb and t1040rdb powerpc/powernv/npu: Add PE to PHB's list powerpc/powernv: Fix insufficient memory allocation powerpc/iommu: Remove the dependency on EEH struct in DDW mechanism Revert "powerpc/eeh: Fix crash in eeh_add_device_early() on Cell" powerpc/eeh: Drop unnecessary label in eeh_pe_change_owner() powerpc/eeh: Ignore handlers in eeh_pe_reset_and_recover() powerpc/eeh: Restore initial state in eeh_pe_reset_and_recover() powerpc/eeh: Don't report error in eeh_pe_reset_and_recover() Revert "powerpc/powernv: Exclude root bus in pnv_pci_reset_secondary_bus()" powerpc/powernv/npu: Enable NVLink pass through powerpc/powernv/npu: Rework TCE Kill handling powerpc/powernv/npu: Add set/unset window helpers powerpc/powernv/ioda2: Export debug helper pe_level_printk() ...
2016-05-11powerpc/pci: Rename pcibios_find_pci_bus()Gavin Shan2-4/+4
This renames pcibios_find_pci_bus() to pci_find_bus_by_node() to avoid conflicts with those PCI subsystem weak function names, which have prefix "pcibios". No logical changes introduced. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-05-11powerpc/pci: Rename pcibios_{add, remove}_pci_devices()Gavin Shan3-4/+4
This renames pcibios_{add,remove}_pci_devices() to avoid conflicts with names of the weak functions in PCI subsystem, which have the prefix "pcibios". No logical changes introduced. Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-By: Alistair Popple <alistair@popple.id.au> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-04-15PCI: acpiphp_ibm: Avoid uninitialized variable referenceDan Carpenter1-0/+2
If ibm_get_table_from_acpi() fails then "table" isn't initialized. Check for failure so we don't reference "table" unless it's been initialized. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-02-23s390/pci: remove pdev pointer from arch dataSebastian Ott1-2/+6
For each PCI function we need to maintain arch specific data in struct zpci_dev which also contains a pointer to struct pci_dev. When a function is registered or deregistered (which is triggered by PCI common code) we need to adjust that pointer which could interfere with the machine check handler (triggered by FW) using zpci_dev->pdev. Since multiple instances of the same pdev could exist at a time this can't be solved with locking. Fix that by ditching the pdev pointer and use a bus walk to reach struct pci_dev (only one instance of a pdev can be registered at the bus at a time). Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-01-29Merge branches 'acpi-video' and 'acpi-hotplug'Rafael J. Wysocki1-1/+3
* acpi-video: ACPI: Revert "ACPI / video: Add Dell Inspiron 5737 to the blacklist" * acpi-hotplug: ACPI / PCI / hotplug: unlock in error path in acpiphp_enable_slot()
2016-01-24ACPI / PCI / hotplug: unlock in error path in acpiphp_enable_slot()Insu Yun1-1/+3
In acpiphp_enable_slot(), there is a missing unlock path when error occurred. It needs to be unlocked before returning an error. Signed-off-by: Insu Yun <wuninsu@gmail.com> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-01-20Merge branch 'pci/trivial' into nextBjorn Helgaas35-1394/+1394
* pci/trivial: PCI: shpchp: Constify hpc_ops structure PCI: Use kobj_to_dev() instead of open-coding it PCI: Use to_pci_dev() instead of open-coding it PCI: Fix all whitespace issues PCI/MSI: Fix typos in <linux/msi.h>
2016-01-15Merge branches 'pci/hotplug' and 'pci/resource' into nextBjorn Helgaas11-94/+60
* pci/hotplug: PCI: ibmphp: Remove unneeded NULL test PCI: hotplug: Use list_for_each_entry() to simplify code PCI: acpiphp_ibm: Fix null dereferences on null ibm_slot * pci/resource: PCI: Avoid iterating through memory outside the resource window PCI: Fix minimum allocation address overwrite
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-23 14:42:19 +0000