summaryrefslogtreecommitdiff
path: root/drivers/nvmem/imx-ocotp.c
AgeCommit message (Collapse)AuthorFilesLines
2017-11-08nvmem: imx-ocotp: Update module descriptionBryan O'Donoghue1-1/+1
This imx-ocotp driver encapsulates support for a subset of both i.MX6 and i.MX7 processors. Update the module description to reflect. Fixes: 711d45477931 ("nvmem: octop: Add i.MX7D support") Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-08nvmem: imx-ocotp: Enable i.MX7D OTP write supportBryan O'Donoghue1-2/+0
After applying patches for both banked access and write timings we can re-enable the OTP write interface on i.MX7D processors. Fixes: 0642bac7da42 ("nvmem: imx-ocotp: add write support") Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-08nvmem: imx-ocotp: Add i.MX7D timing write clock setup supportBryan O'Donoghue1-7/+36
This patch adds logic to correctly setup the write timing parameters when blowing an OTP fuse for the i.MX7S/D. Fixes: 0642bac7da42 ("nvmem: imx-ocotp: add write support") Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-08nvmem: imx-ocotp: Move i.MX6 write clock setup to dedicated functionBryan O'Donoghue1-20/+27
The i.MX7S/D has a different set of timing requirements, as a pre-cursor to adding the i.MX7 timing parameters, move the i.MX6 stuff to a dedicated function. Fixes: 0642bac7da42 ("nvmem: imx-ocotp: add write support") Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-08nvmem: imx-ocotp: Add support for banked OTP addressingBryan O'Donoghue1-4/+64
The i.MX7S/D takes the bank address in the CTRLn.ADDR field and the data value in one of the DATAx {0, 1, 2, 3} register fields. The current write routine is based on writing the CTRLn.ADDR field and writing a single DATA register only. Fixes: 0642bac7da42 ("nvmem: imx-ocotp: add write support") Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-08nvmem: imx-ocotp: Pass parameters via a structBryan O'Donoghue1-10/+34
It will be useful in later patches to know the register access mode and bit-shift to apply to a given input offset. Fixes: 0642bac7da42 ("nvmem: imx-ocotp: add write support") Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-08nvmem: imx-ocotp: Restrict OTP write to IMX6 processorsBryan O'Donoghue1-0/+2
i.MX7S/D have a different scheme for addressing the OTP registers inside the OCOTP block. Currently it's possible to address the wrong OTP registers given the disparity between IMX6 and IMX7 OTP addressing. Since OTP programming is one-time destructive its important we restrict this interface ASAP. Fixes: 0642bac7da42 ("nvmem: imx-ocotp: add write support") Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-08nvmem: set nvmem->owner to nvmem->dev->driver->owner if unsetMasahiro Yamada1-1/+0
All nvmem drivers are supposed to set the owner field of struct nvmem_config, but this matches nvmem->dev->driver->owner. As far as I see in drivers/nvmem/ directory, all the drivers are the case. So, make nvmem_register() set the nvmem's owner to the associated driver's owner unless nvmem_config sets otherwise. Remove .owner settings in the drivers that are now redundant. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08nvmem: imx-ocotp: add write supportRichard Leitner1-2/+208
Implement write routine for OCOTP controller found in i.MX6 SoC's. Furthermore add locking to the read function to prevent race conditions. The write routine code is based on the fsl_otp driver from Freescale. Signed-off-by: Richard Leitner <richard.leitner@skidata.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08nvmem: imx-ocotp: clear error bit after reading locked valuesRichard Leitner1-3/+38
When reading a "read locked" value from the OCOTP controller on i.MX6 SoC's an error bit is set. This bit has to be cleared by software before any new write, read or reload access can be issued. Therefore clear it after we detect such an "locked read". Signed-off-by: Richard Leitner <richard.leitner@skidata.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08nvmem: octop: Add i.MX7D supportPeng Fan1-0/+1
Add i.MX7D support. There is 16 banks, each bank 4 words. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08nvmem: imx-ocotp: fix usage of "dev" pointersRichard Leitner1-1/+3
Assign the correct dev pointer to struct ocotp_priv during probe. This is needed to display dev_* messages correctly. Furthermore harmonize the usage of dev (instead of &pdev->dev) in the probe function. Signed-off-by: Richard Leitner <richard.leitner@skidata.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25nvmem: octop: Add support for imx6ulBai Ping1-0/+1
i.MX6UL is an new SOC of i.MX6 family. Enable ocotp driver support for this SOC. Signed-off-by: Bai Ping <ping.bai@nxp.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-04nvmem: imx-ocotp: Fix wrong register sizeDaniel Schultz1-1/+1
All i.MX6 SoCs have an OCOTP Controller with 4kbit fuses. The i.MX6SL is an exception and has only 2kbit fuses. In the TRM for the i.MX6DQ (IMX6QDRM - Rev 2, 06/2014) the fuses size is described in chapter 46.1.1 with: "32-bit word restricted program and read to 4Kbits of eFuse OTP(512x8)." In the TRM for the i.MX6SL (IMX6SLRM - Rev 2, 06/2015) the fuses size is described in chapter 34.1.1 with: "32-bit word restricted program and read to 2 kbit of eFuse OTP(128x8)." Since the Freescale Linux kernel OCOTP driver works with a fuses size of 2 kbit for the i.MX6SL, it looks like the TRM is wrong and the formula to calculate the correct fuses size has to be 256x8. Signed-off-by: Daniel Schultz <d.schultz@phytec.de> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-25nvmem: imx-ocotp: Fix assignment warning.Srinivas Kandagatla1-1/+1
This patch fixes below error if the driver is compiled with 64 bit machine configuration. "drivers/nvmem/imx-ocotp.c:102:14: warning: assignment makes integer from pointer without a cast" Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-25nvmem: imx-ocotp: handling clockPeng Fan1-1/+14
Before access ocotp nvmem area, the clock should be enabled. Or, `hexdump nvmem` will hang the system. So, use such flow: " 1. clock_enable_prepare 2. read nvmem ocotp area 3. clock_disable_unprepare " Signed-off-by: Peng Fan <van.freenix@gmail.com> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-01nvmem: imx-ocotp: remove nvmem regmap dependencySrinivas Kandagatla1-44/+11
This patch moves to nvmem support in the driver to use callback instead of regmap. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-05nvmem: imx-ocotp: Fix return value of imx_ocotp_readAxel Lin1-1/+1
imx_ocotp_read() should return 0 on success. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04nvmem: imx-ocotp: Add i.MX6 OCOTP driverPhilipp Zabel1-0/+154
This driver handles the i.MX On-Chip OTP Controller found in i.MX6Q/D, i.MX6S/DL, i.MX6SL, and i.MX6SX SoCs. Currently it just returns the values stored in the shadow registers. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>