summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2024-02-08octeontx2-af: Initialize maps.Ratheesh Kannoth1-16/+15
kmalloc_array() without __GFP_ZERO flag does not initialize memory to zero. This causes issues. Use kcalloc() for maps and bitmap_zalloc() for bitmaps. Fixes: dd7842878633 ("octeontx2-af: Add new devlink param to configure maximum usable NIX block LFs") Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Reviewed-by: Brett Creeley <bcreeley@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240206024000.1070260-1-rkannoth@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-08net: ethernet: ti: cpsw: enable mac_managed_pm to fix mdioSinthu Raja1-0/+2
The below commit introduced a WARN when phy state is not in the states: PHY_HALTED, PHY_READY and PHY_UP. commit 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state") When cpsw resumes, there have port in PHY_NOLINK state, so the below warning comes out. Set mac_managed_pm be true to tell mdio that the phy resume/suspend is managed by the mac, to fix the following warning: WARNING: CPU: 0 PID: 965 at drivers/net/phy/phy_device.c:326 mdio_bus_phy_resume+0x140/0x144 CPU: 0 PID: 965 Comm: sh Tainted: G O 6.1.46-g247b2535b2 #1 Hardware name: Generic AM33XX (Flattened Device Tree) unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x24/0x2c dump_stack_lvl from __warn+0x84/0x15c __warn from warn_slowpath_fmt+0x1a8/0x1c8 warn_slowpath_fmt from mdio_bus_phy_resume+0x140/0x144 mdio_bus_phy_resume from dpm_run_callback+0x3c/0x140 dpm_run_callback from device_resume+0xb8/0x2b8 device_resume from dpm_resume+0x144/0x314 dpm_resume from dpm_resume_end+0x14/0x20 dpm_resume_end from suspend_devices_and_enter+0xd0/0x924 suspend_devices_and_enter from pm_suspend+0x2e0/0x33c pm_suspend from state_store+0x74/0xd0 state_store from kernfs_fop_write_iter+0x104/0x1ec kernfs_fop_write_iter from vfs_write+0x1b8/0x358 vfs_write from ksys_write+0x78/0xf8 ksys_write from ret_fast_syscall+0x0/0x54 Exception stack(0xe094dfa8 to 0xe094dff0) dfa0: 00000004 005c3fb8 00000001 005c3fb8 00000004 00000001 dfc0: 00000004 005c3fb8 b6f6bba0 00000004 00000004 0059edb8 00000000 00000000 dfe0: 00000004 bed918f0 b6f09bd3 b6e89a66 Cc: <stable@vger.kernel.org> # v6.0+ Fixes: 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state") Fixes: fba863b81604 ("net: phy: make PHY PM ops a no-op if MAC driver manages PHY PM") Signed-off-by: Sinthu Raja <sinthu.raja@ti.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-08net: ethernet: ti: cpsw_new: enable mac_managed_pm to fix mdioSinthu Raja1-0/+3
The below commit introduced a WARN when phy state is not in the states: PHY_HALTED, PHY_READY and PHY_UP. commit 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state") When cpsw_new resumes, there have port in PHY_NOLINK state, so the below warning comes out. Set mac_managed_pm be true to tell mdio that the phy resume/suspend is managed by the mac, to fix the following warning: WARNING: CPU: 0 PID: 965 at drivers/net/phy/phy_device.c:326 mdio_bus_phy_resume+0x140/0x144 CPU: 0 PID: 965 Comm: sh Tainted: G O 6.1.46-g247b2535b2 #1 Hardware name: Generic AM33XX (Flattened Device Tree) unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x24/0x2c dump_stack_lvl from __warn+0x84/0x15c __warn from warn_slowpath_fmt+0x1a8/0x1c8 warn_slowpath_fmt from mdio_bus_phy_resume+0x140/0x144 mdio_bus_phy_resume from dpm_run_callback+0x3c/0x140 dpm_run_callback from device_resume+0xb8/0x2b8 device_resume from dpm_resume+0x144/0x314 dpm_resume from dpm_resume_end+0x14/0x20 dpm_resume_end from suspend_devices_and_enter+0xd0/0x924 suspend_devices_and_enter from pm_suspend+0x2e0/0x33c pm_suspend from state_store+0x74/0xd0 state_store from kernfs_fop_write_iter+0x104/0x1ec kernfs_fop_write_iter from vfs_write+0x1b8/0x358 vfs_write from ksys_write+0x78/0xf8 ksys_write from ret_fast_syscall+0x0/0x54 Exception stack(0xe094dfa8 to 0xe094dff0) dfa0: 00000004 005c3fb8 00000001 005c3fb8 00000004 00000001 dfc0: 00000004 005c3fb8 b6f6bba0 00000004 00000004 0059edb8 00000000 00000000 dfe0: 00000004 bed918f0 b6f09bd3 b6e89a66 Cc: <stable@vger.kernel.org> # v6.0+ Fixes: 744d23c71af3 ("net: phy: Warn about incorrect mdio_bus_phy_resume() state") Fixes: fba863b81604 ("net: phy: make PHY PM ops a no-op if MAC driver manages PHY PM") Signed-off-by: Sinthu Raja <sinthu.raja@ti.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-07Merge tag 'wireless-2024-02-06' of ↵Jakub Kicinski53-16/+64
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Kalle Valo says: ==================== wireless fixes for v6.8-rc4 This time we have unusually large wireless pull request. Several functionality fixes to both stack and iwlwifi. Lots of fixes to warnings, especially to MODULE_DESCRIPTION(). * tag 'wireless-2024-02-06' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: (31 commits) wifi: mt76: mt7996: fix fortify warning wifi: brcmfmac: Adjust n_channels usage for __counted_by wifi: iwlwifi: do not announce EPCS support wifi: iwlwifi: exit eSR only after the FW does wifi: iwlwifi: mvm: fix a battery life regression wifi: mac80211: accept broadcast probe responses on 6 GHz wifi: mac80211: adding missing drv_mgd_complete_tx() call wifi: mac80211: fix waiting for beacons logic wifi: mac80211: fix unsolicited broadcast probe config wifi: mac80211: initialize SMPS mode correctly wifi: mac80211: fix driver debugfs for vif type change wifi: mac80211: set station RX-NSS on reconfig wifi: mac80211: fix RCU use in TDLS fast-xmit wifi: mac80211: improve CSA/ECSA connection refusal wifi: cfg80211: detect stuck ECSA element in probe resp wifi: iwlwifi: remove extra kernel-doc wifi: fill in MODULE_DESCRIPTION()s for mt76 drivers wifi: fill in MODULE_DESCRIPTION()s for wilc1000 wifi: fill in MODULE_DESCRIPTION()s for wl18xx wifi: fill in MODULE_DESCRIPTION()s for p54spi ... ==================== Link: https://lore.kernel.org/r/20240206095722.CD9D2C433F1@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-07net: intel: fix old compiler regressionsJesse Brandeburg3-3/+3
The kernel build regressions/improvements email contained a couple of issues with old compilers (in fact all the reports were on different architectures, but all gcc 5.5) and the FIELD_PREP() and FIELD_GET() conversions. They're all because an integer #define that should have been declared as unsigned, was shifted to the point that it could set the sign bit. The fix just involves making sure the defines use the "U" identifier on the constants to make sure they're unsigned. Should make the checkers happier. Confirmed with objdump before/after that there is no change to the binaries. Issues were reported as follows: ./drivers/net/ethernet/intel/ice/ice_base.c:238:7: note: in expansion of macro 'FIELD_GET' (FIELD_GET(GLINT_CTL_ITR_GRAN_25_M, regval) == ICE_ITR_GRAN_US)) ^ ./include/linux/compiler_types.h:435:38: error: call to '__compiletime_assert_1093' declared with attribute error: FIELD_GET: mask is not constant drivers/net/ethernet/intel/ice/ice_nvm.c:709:16: note: in expansion of macro ‘FIELD_GET’ orom->major = FIELD_GET(ICE_OROM_VER_MASK, combo_ver); ^ ./include/linux/compiler_types.h:435:38: error: call to ‘__compiletime_assert_796’ declared with attribute error: FIELD_GET: mask is not constant drivers/net/ethernet/intel/ice/ice_common.c:945:18: note: in expansion of macro ‘FIELD_GET’ u8 max_agg_bw = FIELD_GET(GL_PWR_MODE_CTL_CAR_MAX_BW_M, ^ ./include/linux/compiler_types.h:435:38: error: call to ‘__compiletime_assert_420’ declared with attribute error: FIELD_GET: mask is not constant drivers/net/ethernet/intel/i40e/i40e_dcb.c:458:8: note: in expansion of macro ‘FIELD_GET’ oui = FIELD_GET(I40E_LLDP_TLV_OUI_MASK, ouisubtype); ^ Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Closes: https://lore.kernel.org/lkml/d03e90ca-8485-4d1b-5ec1-c3398e0e8da@linux-m68k.org/ #i40e #ice Fixes: 62589808d73b ("i40e: field get conversion") Fixes: 5a259f8e0baf ("ice: field get conversion") Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Link: https://lore.kernel.org/r/20240206022906.2194214-1-jesse.brandeburg@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-07net: stmmac: protect updates of 64-bit statistics countersPetr Tesarik7-157/+221
As explained by a comment in <linux/u64_stats_sync.h>, write side of struct u64_stats_sync must ensure mutual exclusion, or one seqcount update could be lost on 32-bit platforms, thus blocking readers forever. Such lockups have been observed in real world after stmmac_xmit() on one CPU raced with stmmac_napi_poll_tx() on another CPU. To fix the issue without introducing a new lock, split the statics into three parts: 1. fields updated only under the tx queue lock, 2. fields updated only during NAPI poll, 3. fields updated only from interrupt context, Updates to fields in the first two groups are already serialized through other locks. It is sufficient to split the existing struct u64_stats_sync so that each group has its own. Note that tx_set_ic_bit is updated from both contexts. Split this counter so that each context gets its own, and calculate their sum to get the total value in stmmac_get_ethtool_stats(). For the third group, multiple interrupts may be processed by different CPUs at the same time, but interrupts on the same CPU will not nest. Move fields from this group to a newly created per-cpu struct stmmac_pcpu_stats. Fixes: 133466c3bbe1 ("net: stmmac: use per-queue 64 bit statistics where necessary") Link: https://lore.kernel.org/netdev/Za173PhviYg-1qIn@torres.zugschlus.de/t/ Cc: stable@vger.kernel.org Signed-off-by: Petr Tesarik <petr@tesarici.cz> Reviewed-by: Jisheng Zhang <jszhang@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-06ppp_async: limit MRU to 64KEric Dumazet1-0/+4
syzbot triggered a warning [1] in __alloc_pages(): WARN_ON_ONCE_GFP(order > MAX_PAGE_ORDER, gfp) Willem fixed a similar issue in commit c0a2a1b0d631 ("ppp: limit MRU to 64K") Adopt the same sanity check for ppp_async_ioctl(PPPIOCSMRU) [1]: WARNING: CPU: 1 PID: 11 at mm/page_alloc.c:4543 __alloc_pages+0x308/0x698 mm/page_alloc.c:4543 Modules linked in: CPU: 1 PID: 11 Comm: kworker/u4:0 Not tainted 6.8.0-rc2-syzkaller-g41bccc98fb79 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023 Workqueue: events_unbound flush_to_ldisc pstate: 204000c5 (nzCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __alloc_pages+0x308/0x698 mm/page_alloc.c:4543 lr : __alloc_pages+0xc8/0x698 mm/page_alloc.c:4537 sp : ffff800093967580 x29: ffff800093967660 x28: ffff8000939675a0 x27: dfff800000000000 x26: ffff70001272ceb4 x25: 0000000000000000 x24: ffff8000939675c0 x23: 0000000000000000 x22: 0000000000060820 x21: 1ffff0001272ceb8 x20: ffff8000939675e0 x19: 0000000000000010 x18: ffff800093967120 x17: ffff800083bded5c x16: ffff80008ac97500 x15: 0000000000000005 x14: 1ffff0001272cebc x13: 0000000000000000 x12: 0000000000000000 x11: ffff70001272cec1 x10: 1ffff0001272cec0 x9 : 0000000000000001 x8 : ffff800091c91000 x7 : 0000000000000000 x6 : 000000000000003f x5 : 00000000ffffffff x4 : 0000000000000000 x3 : 0000000000000020 x2 : 0000000000000008 x1 : 0000000000000000 x0 : ffff8000939675e0 Call trace: __alloc_pages+0x308/0x698 mm/page_alloc.c:4543 __alloc_pages_node include/linux/gfp.h:238 [inline] alloc_pages_node include/linux/gfp.h:261 [inline] __kmalloc_large_node+0xbc/0x1fc mm/slub.c:3926 __do_kmalloc_node mm/slub.c:3969 [inline] __kmalloc_node_track_caller+0x418/0x620 mm/slub.c:4001 kmalloc_reserve+0x17c/0x23c net/core/skbuff.c:590 __alloc_skb+0x1c8/0x3d8 net/core/skbuff.c:651 __netdev_alloc_skb+0xb8/0x3e8 net/core/skbuff.c:715 netdev_alloc_skb include/linux/skbuff.h:3235 [inline] dev_alloc_skb include/linux/skbuff.h:3248 [inline] ppp_async_input drivers/net/ppp/ppp_async.c:863 [inline] ppp_asynctty_receive+0x588/0x186c drivers/net/ppp/ppp_async.c:341 tty_ldisc_receive_buf+0x12c/0x15c drivers/tty/tty_buffer.c:390 tty_port_default_receive_buf+0x74/0xac drivers/tty/tty_port.c:37 receive_buf drivers/tty/tty_buffer.c:444 [inline] flush_to_ldisc+0x284/0x6e4 drivers/tty/tty_buffer.c:494 process_one_work+0x694/0x1204 kernel/workqueue.c:2633 process_scheduled_works kernel/workqueue.c:2706 [inline] worker_thread+0x938/0xef4 kernel/workqueue.c:2787 kthread+0x288/0x310 kernel/kthread.c:388 ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:860 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-and-tested-by: syzbot+c5da1f087c9e4ec6c933@syzkaller.appspotmail.com Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20240205171004.1059724-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-06net: stmmac: xgmac: fix a typo of register name in DPP safety handlingFurong Xu2-2/+2
DDPP is copied from Synopsys Data book: DDPP: Disable Data path Parity Protection. When it is 0x0, Data path Parity Protection is enabled. When it is 0x1, Data path Parity Protection is disabled. The macro name should be XGMAC_DPP_DISABLE. Fixes: 46eba193d04f ("net: stmmac: xgmac: fix handling of DPP safety error for DMA channels") Signed-off-by: Furong Xu <0x1207@gmail.com> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Link: https://lore.kernel.org/r/20240203053133.1129236-1-0x1207@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-05wifi: mt76: mt7996: fix fortify warningFelix Fietkau1-1/+2
Copy cck and ofdm separately in order to avoid __read_overflow2_field warning. Fixes: f75e4779d215 ("wifi: mt76: mt7996: add txpower setting support") Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240203132446.54790-1-nbd@nbd.name
2024-02-05nfp: enable NETDEV_XDP_ACT_REDIRECT feature flagJames Hershaw1-0/+1
Enable previously excluded xdp feature flag for NFD3 devices. This feature flag is required in order to bind nfp interfaces to an xdp socket and the nfp driver does in fact support the feature. Fixes: 66c0e13ad236 ("drivers: net: turn on XDP features") Cc: stable@vger.kernel.org # 6.3+ Signed-off-by: James Hershaw <james.hershaw@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-05nfp: flower: prevent re-adding mac index for bonded portDaniel de Villiers1-1/+1
When physical ports are reset (either through link failure or manually toggled down and up again) that are slaved to a Linux bond with a tunnel endpoint IP address on the bond device, not all tunnel packets arriving on the bond port are decapped as expected. The bond dev assigns the same MAC address to itself and each of its slaves. When toggling a slave device, the same MAC address is therefore offloaded to the NFP multiple times with different indexes. The issue only occurs when re-adding the shared mac. The nfp_tunnel_add_shared_mac() function has a conditional check early on that checks if a mac entry already exists and if that mac entry is global: (entry && nfp_tunnel_is_mac_idx_global(entry->index)). In the case of a bonded device (For example br-ex), the mac index is obtained, and no new index is assigned. We therefore modify the conditional in nfp_tunnel_add_shared_mac() to check if the port belongs to the LAG along with the existing checks to prevent a new global mac index from being re-assigned to the slave port. Fixes: 20cce8865098 ("nfp: flower: enable MAC address sharing for offloadable devs") CC: stable@vger.kernel.org # 5.1+ Signed-off-by: Daniel de Villiers <daniel.devilliers@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-05nfp: use correct macro for LengthSelect in BAR configDaniel Basilio1-2/+4
The 1st and 2nd expansion BAR configuration registers are configured, when the driver starts up, in variables 'barcfg_msix_general' and 'barcfg_msix_xpb', respectively. The 'LengthSelect' field is ORed in from bit 0, which is incorrect. The 'LengthSelect' field should start from bit 27. This has largely gone un-noticed because NFP_PCIE_BAR_PCIE2CPP_LengthSelect_32BIT happens to be 0. Fixes: 4cb584e0ee7d ("nfp: add CPP access core") Cc: stable@vger.kernel.org # 4.11+ Signed-off-by: Daniel Basilio <daniel.basilio@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-04hv_netvsc: Register VF in netvsc_probe if NET_DEVICE_REGISTER missedShradha Gupta1-20/+62
If hv_netvsc driver is unloaded and reloaded, the NET_DEVICE_REGISTER handler cannot perform VF register successfully as the register call is received before netvsc_probe is finished. This is because we register register_netdevice_notifier() very early( even before vmbus_driver_register()). To fix this, we try to register each such matching VF( if it is visible as a netdevice) at the end of netvsc_probe. Cc: stable@vger.kernel.org Fixes: 85520856466e ("hv_netvsc: Fix race of register_netdevice_notifier and VF register") Suggested-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-03octeontx2-pf: Fix a memleak otx2_sq_initZhipeng Lu1-2/+12
When qmem_alloc and pfvf->hw_ops->sq_aq_init fails, sq->sg should be freed to prevent memleak. Fixes: c9c12d339d93 ("octeontx2-pf: Add support for PTP clock") Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn> Acked-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-03tsnep: Fix mapping for zero copy XDP_TX actionGerhard Engleder1-4/+12
For XDP_TX action xdp_buff is converted to xdp_frame. The conversion is done by xdp_convert_buff_to_frame(). The memory type of the resulting xdp_frame depends on the memory type of the xdp_buff. For page pool based xdp_buff it produces xdp_frame with memory type MEM_TYPE_PAGE_POOL. For zero copy XSK pool based xdp_buff it produces xdp_frame with memory type MEM_TYPE_PAGE_ORDER0. tsnep_xdp_xmit_back() is not prepared for that and uses always the page pool buffer type TSNEP_TX_TYPE_XDP_TX. This leads to invalid mappings and the transmission of undefined data. Improve tsnep_xdp_xmit_back() to use the generic buffer type TSNEP_TX_TYPE_XDP_NDO for zero copy XDP_TX. Fixes: 3fc2333933fd ("tsnep: Add XDP socket zero-copy RX support") Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-02net: atlantic: Fix DMA mapping for PTP hwts ringIvan Vecera3-2/+16
Function aq_ring_hwts_rx_alloc() maps extra AQ_CFG_RXDS_DEF bytes for PTP HWTS ring but then generic aq_ring_free() does not take this into account. Create and use a specific function to free HWTS ring to fix this issue. Trace: [ 215.351607] ------------[ cut here ]------------ [ 215.351612] DMA-API: atlantic 0000:4b:00.0: device driver frees DMA memory with different size [device address=0x00000000fbdd0000] [map size=34816 bytes] [unmap size=32768 bytes] [ 215.351635] WARNING: CPU: 33 PID: 10759 at kernel/dma/debug.c:988 check_unmap+0xa6f/0x2360 ... [ 215.581176] Call Trace: [ 215.583632] <TASK> [ 215.585745] ? show_trace_log_lvl+0x1c4/0x2df [ 215.590114] ? show_trace_log_lvl+0x1c4/0x2df [ 215.594497] ? debug_dma_free_coherent+0x196/0x210 [ 215.599305] ? check_unmap+0xa6f/0x2360 [ 215.603147] ? __warn+0xca/0x1d0 [ 215.606391] ? check_unmap+0xa6f/0x2360 [ 215.610237] ? report_bug+0x1ef/0x370 [ 215.613921] ? handle_bug+0x3c/0x70 [ 215.617423] ? exc_invalid_op+0x14/0x50 [ 215.621269] ? asm_exc_invalid_op+0x16/0x20 [ 215.625480] ? check_unmap+0xa6f/0x2360 [ 215.629331] ? mark_lock.part.0+0xca/0xa40 [ 215.633445] debug_dma_free_coherent+0x196/0x210 [ 215.638079] ? __pfx_debug_dma_free_coherent+0x10/0x10 [ 215.643242] ? slab_free_freelist_hook+0x11d/0x1d0 [ 215.648060] dma_free_attrs+0x6d/0x130 [ 215.651834] aq_ring_free+0x193/0x290 [atlantic] [ 215.656487] aq_ptp_ring_free+0x67/0x110 [atlantic] ... [ 216.127540] ---[ end trace 6467e5964dd2640b ]--- [ 216.132160] DMA-API: Mapped at: [ 216.132162] debug_dma_alloc_coherent+0x66/0x2f0 [ 216.132165] dma_alloc_attrs+0xf5/0x1b0 [ 216.132168] aq_ring_hwts_rx_alloc+0x150/0x1f0 [atlantic] [ 216.132193] aq_ptp_ring_alloc+0x1bb/0x540 [atlantic] [ 216.132213] aq_nic_init+0x4a1/0x760 [atlantic] Fixes: 94ad94558b0f ("net: aquantia: add PTP rings infrastructure") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20240201094752.883026-1-ivecera@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-02netdevsim: avoid potential loop in nsim_dev_trap_report_work()Eric Dumazet1-4/+4
Many syzbot reports include the following trace [1] If nsim_dev_trap_report_work() can not grab the mutex, it should rearm itself at least one jiffie later. [1] Sending NMI from CPU 1 to CPUs 0: NMI backtrace for cpu 0 CPU: 0 PID: 32383 Comm: kworker/0:2 Not tainted 6.8.0-rc2-syzkaller-00031-g861c0981648f #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023 Workqueue: events nsim_dev_trap_report_work RIP: 0010:bytes_is_nonzero mm/kasan/generic.c:89 [inline] RIP: 0010:memory_is_nonzero mm/kasan/generic.c:104 [inline] RIP: 0010:memory_is_poisoned_n mm/kasan/generic.c:129 [inline] RIP: 0010:memory_is_poisoned mm/kasan/generic.c:161 [inline] RIP: 0010:check_region_inline mm/kasan/generic.c:180 [inline] RIP: 0010:kasan_check_range+0x101/0x190 mm/kasan/generic.c:189 Code: 07 49 39 d1 75 0a 45 3a 11 b8 01 00 00 00 7c 0b 44 89 c2 e8 21 ed ff ff 83 f0 01 5b 5d 41 5c c3 48 85 d2 74 4f 48 01 ea eb 09 <48> 83 c0 01 48 39 d0 74 41 80 38 00 74 f2 eb b6 41 bc 08 00 00 00 RSP: 0018:ffffc90012dcf998 EFLAGS: 00000046 RAX: fffffbfff258af1e RBX: fffffbfff258af1f RCX: ffffffff8168eda3 RDX: fffffbfff258af1f RSI: 0000000000000004 RDI: ffffffff92c578f0 RBP: fffffbfff258af1e R08: 0000000000000000 R09: fffffbfff258af1e R10: ffffffff92c578f3 R11: ffffffff8acbcbc0 R12: 0000000000000002 R13: ffff88806db38400 R14: 1ffff920025b9f42 R15: ffffffff92c578e8 FS: 0000000000000000(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000c00994e078 CR3: 000000002c250000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <NMI> </NMI> <TASK> instrument_atomic_read include/linux/instrumented.h:68 [inline] atomic_read include/linux/atomic/atomic-instrumented.h:32 [inline] queued_spin_is_locked include/asm-generic/qspinlock.h:57 [inline] debug_spin_unlock kernel/locking/spinlock_debug.c:101 [inline] do_raw_spin_unlock+0x53/0x230 kernel/locking/spinlock_debug.c:141 __raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:150 [inline] _raw_spin_unlock_irqrestore+0x22/0x70 kernel/locking/spinlock.c:194 debug_object_activate+0x349/0x540 lib/debugobjects.c:726 debug_work_activate kernel/workqueue.c:578 [inline] insert_work+0x30/0x230 kernel/workqueue.c:1650 __queue_work+0x62e/0x11d0 kernel/workqueue.c:1802 __queue_delayed_work+0x1bf/0x270 kernel/workqueue.c:1953 queue_delayed_work_on+0x106/0x130 kernel/workqueue.c:1989 queue_delayed_work include/linux/workqueue.h:563 [inline] schedule_delayed_work include/linux/workqueue.h:677 [inline] nsim_dev_trap_report_work+0x9c0/0xc80 drivers/net/netdevsim/dev.c:842 process_one_work+0x886/0x15d0 kernel/workqueue.c:2633 process_scheduled_works kernel/workqueue.c:2706 [inline] worker_thread+0x8b9/0x1290 kernel/workqueue.c:2787 kthread+0x2c6/0x3a0 kernel/kthread.c:388 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:242 </TASK> Fixes: 012ec02ae441 ("netdevsim: convert driver to use unlocked devlink API during init/fini") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20240201175324.3752746-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-02wifi: brcmfmac: Adjust n_channels usage for __counted_byKees Cook1-2/+4
After commit e3eac9f32ec0 ("wifi: cfg80211: Annotate struct cfg80211_scan_request with __counted_by"), the compiler may enforce dynamic array indexing of req->channels to stay below n_channels. As a result, n_channels needs to be increased _before_ accessing the newly added array index. Increment it first, then use "i" for the prior index. Solves this warning in the coming GCC that has __counted_by support: ../drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c: In function 'brcmf_internal_escan_add_info': ../drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:3783:46: warning: operation on 'req-> n_channels' may be undefined [-Wsequence-point] 3783 | req->channels[req->n_channels++] = chan; | ~~~~~~~~~~~~~~~^~ Fixes: e3eac9f32ec0 ("wifi: cfg80211: Annotate struct cfg80211_scan_request with __counted_by") Cc: Arend van Spriel <aspriel@gmail.com> Cc: Franky Lin <franky.lin@broadcom.com> Cc: Hante Meuleman <hante.meuleman@broadcom.com> Cc: Kalle Valo <kvalo@kernel.org> Cc: Chi-hsien Lin <chi-hsien.lin@infineon.com> Cc: Ian Lin <ian.lin@infineon.com> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Wright Feng <wright.feng@cypress.com> Cc: Hector Martin <marcan@marcan.st> Cc: linux-wireless@vger.kernel.org Cc: brcm80211-dev-list.pdl@broadcom.com Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240126223150.work.548-kees@kernel.org
2024-02-02wifi: iwlwifi: do not announce EPCS supportBenjamin Berg1-4/+1
mac80211 does not have proper support for EPCS currently as that would require changing the ECDA parameters if EPCS (Emergency Preparedness Communications Service) is in use. As such, do not announce support for it in the capabilities. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240201155157.59d71656addc.Idde91b3018239c49fc6ed231b411d05354fb9fb1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-02wifi: iwlwifi: exit eSR only after the FW doesMiri Korenblit1-3/+3
Currently the driver exits eSR by calling iwl_mvm_esr_mode_inactive() before updating the FW (by deactivating one of the links), and therefore before sending the EML frame notifying that we are no longer in eSR. This is wrong for several reasons: 1. The driver sends SMPS activation frames when we are still in eSR and SMPS should be disabled when in eSR 2. The driver restores RLC configuration as it was before eSR entering, and RLC command shouldn't be sent in eSR Fix this by calling iwl_mvm_esr_mode_inactive() after FW update Fixes: 12bacfc2c065 ("wifi: iwlwifi: handle eSR transitions") Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://msgid.link/20240201155157.d8d9dc277d4e.Ib5aee0fd05e35b1da7f18753eb3c8fa0a3f872f3@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-02wifi: iwlwifi: mvm: fix a battery life regressionEmmanuel Grumbach1-1/+1
Fix the DBG_CONFIG_TOKEN to not enable debug components that would prevent the device to save power. Fixes: fc2fe0a5e856 ("wifi: iwlwifi: fw: disable firmware debug asserts") Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Eilon Rinat <eilon.rinat@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20240128084842.90d2600edc27.Id657ea2f0ddb131f5f9d0ac39aeb8c88754fe54b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-02net: stmmac: xgmac: fix handling of DPP safety error for DMA channelsFurong Xu3-1/+60
Commit 56e58d6c8a56 ("net: stmmac: Implement Safety Features in XGMAC core") checks and reports safety errors, but leaves the Data Path Parity Errors for each channel in DMA unhandled at all, lead to a storm of interrupt. Fix it by checking and clearing the DMA_DPP_Interrupt_Status register. Fixes: 56e58d6c8a56 ("net: stmmac: Implement Safety Features in XGMAC core") Signed-off-by: Furong Xu <0x1207@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-01idpf: avoid compiler padding in virtchnl2_ptype structPavan Kumar Linga1-1/+1
In the arm random config file, kconfig option 'CONFIG_AEABI' is disabled which results in adding the compiler flag '-mabi=apcs-gnu'. This causes the compiler to add padding in virtchnl2_ptype structure to align it to 8 bytes, resulting in the following size check failure: include/linux/build_bug.h:78:41: error: static assertion failed: "(6) == sizeof(struct virtchnl2_ptype)" 78 | #define __static_assert(expr, msg, ...) _Static_assert(expr, msg) | ^~~~~~~~~~~~~~ include/linux/build_bug.h:77:34: note: in expansion of macro '__static_assert' 77 | #define static_assert(expr, ...) __static_assert(expr, ##__VA_ARGS__, #expr) | ^~~~~~~~~~~~~~~ drivers/net/ethernet/intel/idpf/virtchnl2.h:26:9: note: in expansion of macro 'static_assert' 26 | static_assert((n) == sizeof(struct X)) | ^~~~~~~~~~~~~ drivers/net/ethernet/intel/idpf/virtchnl2.h:982:1: note: in expansion of macro 'VIRTCHNL2_CHECK_STRUCT_LEN' 982 | VIRTCHNL2_CHECK_STRUCT_LEN(6, virtchnl2_ptype); | ^~~~~~~~~~~~~~~~~~~~~~~~~~ Avoid the compiler padding by using "__packed" structure attribute for the virtchnl2_ptype struct. Also align the structure by using "__aligned(2)" for better code optimization. Fixes: 0d7502a9b4a7 ("virtchnl: add virtchnl version 2 ops") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202312220250.ufEm8doQ-lkp@intel.com Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20240131222241.2087516-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-01hv_netvsc: Fix race condition between netvsc_probe and netvsc_removeSouradeep Chakrabarti1-1/+4
In commit ac5047671758 ("hv_netvsc: Disable NAPI before closing the VMBus channel"), napi_disable was getting called for all channels, including all subchannels without confirming if they are enabled or not. This caused hv_netvsc getting hung at napi_disable, when netvsc_probe() has finished running but nvdev->subchan_work has not started yet. netvsc_subchan_work() -> rndis_set_subchannel() has not created the sub-channels and because of that netvsc_sc_open() is not running. netvsc_remove() calls cancel_work_sync(&nvdev->subchan_work), for which netvsc_subchan_work did not run. netif_napi_add() sets the bit NAPI_STATE_SCHED because it ensures NAPI cannot be scheduled. Then netvsc_sc_open() -> napi_enable will clear the NAPIF_STATE_SCHED bit, so it can be scheduled. napi_disable() does the opposite. Now during netvsc_device_remove(), when napi_disable is called for those subchannels, napi_disable gets stuck on infinite msleep. This fix addresses this problem by ensuring that napi_disable() is not getting called for non-enabled NAPI struct. But netif_napi_del() is still necessary for these non-enabled NAPI struct for cleanup purpose. Call trace: [ 654.559417] task:modprobe state:D stack: 0 pid: 2321 ppid: 1091 flags:0x00004002 [ 654.568030] Call Trace: [ 654.571221] <TASK> [ 654.573790] __schedule+0x2d6/0x960 [ 654.577733] schedule+0x69/0xf0 [ 654.581214] schedule_timeout+0x87/0x140 [ 654.585463] ? __bpf_trace_tick_stop+0x20/0x20 [ 654.590291] msleep+0x2d/0x40 [ 654.593625] napi_disable+0x2b/0x80 [ 654.597437] netvsc_device_remove+0x8a/0x1f0 [hv_netvsc] [ 654.603935] rndis_filter_device_remove+0x194/0x1c0 [hv_netvsc] [ 654.611101] ? do_wait_intr+0xb0/0xb0 [ 654.615753] netvsc_remove+0x7c/0x120 [hv_netvsc] [ 654.621675] vmbus_remove+0x27/0x40 [hv_vmbus] Cc: stable@vger.kernel.org Fixes: ac5047671758 ("hv_netvsc: Disable NAPI before closing the VMBus channel") Signed-off-by: Souradeep Chakrabarti <schakrabarti@linux.microsoft.com> Reviewed-by: Dexuan Cui <decui@microsoft.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/1706686551-28510-1-git-send-email-schakrabarti@linux.microsoft.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-01xen-netback: properly sync TX responsesJan Beulich1-44/+40
Invoking the make_tx_response() / push_tx_responses() pair with no lock held would be acceptable only if all such invocations happened from the same context (NAPI instance or dealloc thread). Since this isn't the case, and since the interface "spec" also doesn't demand that multicast operations may only be performed with no in-flight transmits, MCAST_{ADD,DEL} processing also needs to acquire the response lock around the invocations. To prevent similar mistakes going forward, "downgrade" the present functions to private helpers of just the two remaining ones using them directly, with no forward declarations anymore. This involves renaming what so far was make_tx_response(), for the new function of that name to serve the new (wrapper) purpose. While there, - constify the txp parameters, - correct xenvif_idx_release()'s status parameter's type, - rename {,_}make_tx_response()'s status parameters for consistency with xenvif_idx_release()'s. Fixes: 210c34dcd8d9 ("xen-netback: add support for multicast control") Cc: stable@vger.kernel.org Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Paul Durrant <paul@xen.org> Link: https://lore.kernel.org/r/980c6c3d-e10e-4459-8565-e8fbde122f00@suse.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-01octeontx2-pf: Remove xdp queues on program detachGeetha sowjanya3-7/+4
XDP queues are created/destroyed when a XDP program is attached/detached. In current driver xdp_queues are not getting destroyed on program exit due to incorrect xdp_queue and tot_tx_queue count values. This patch fixes the issue by setting tot_tx_queue and xdp_queue count to correct values. It also fixes xdp.data_hard_start address. Fixes: 06059a1a9a4a ("octeontx2-pf: Add XDP support to netdev PF") Signed-off-by: Geetha sowjanya <gakula@marvell.com> Link: https://lore.kernel.org/r/20240130120610.16673-1-gakula@marvell.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-01wifi: iwlwifi: remove extra kernel-docJohannes Berg1-2/+1
This no longer exists, remove the kernel-doc. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240128102209.d2192d79bc09.Id9551728d618248dd471382a5283503a8976237a@changeid
2024-01-31pds_core: Rework teardown/setup flow to be more commonBrett Creeley5-18/+9
Currently the teardown/setup flow for driver probe/remove is quite a bit different from the reset flows in pdsc_fw_down()/pdsc_fw_up(). One key piece that's missing are the calls to pci_alloc_irq_vectors() and pci_free_irq_vectors(). The pcie reset case is calling pci_free_irq_vectors() on reset_prepare, but not calling the corresponding pci_alloc_irq_vectors() on reset_done. This is causing unexpected/unwanted interrupt behavior due to the adminq interrupt being accidentally put into legacy interrupt mode. Also, the pci_alloc_irq_vectors()/pci_free_irq_vectors() functions are being called directly in probe/remove respectively. Fix this inconsistency by making the following changes: 1. Always call pdsc_dev_init() in pdsc_setup(), which calls pci_alloc_irq_vectors() and get rid of the now unused pds_dev_reinit(). 2. Always free/clear the pdsc->intr_info in pdsc_teardown() since this structure will get re-alloced in pdsc_setup(). 3. Move the calls of pci_free_irq_vectors() to pdsc_teardown() since pci_alloc_irq_vectors() will always be called in pdsc_setup()->pdsc_dev_init() for both the probe/remove and reset flows. 4. Make sure to only create the debugfs "identity" entry when it doesn't already exist, which it will in the reset case because it's already been created in the initial call to pdsc_dev_init(). Fixes: ffa55858330f ("pds_core: implement pci reset handlers") Signed-off-by: Brett Creeley <brett.creeley@amd.com> Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Link: https://lore.kernel.org/r/20240129234035.69802-7-brett.creeley@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-31pds_core: Clear BARs on resetBrett Creeley6-11/+45
During reset the BARs might be accessed when they are unmapped. This can cause unexpected issues, so fix it by clearing the cached BAR values so they are not accessed until they are re-mapped. Also, make sure any places that can access the BARs when they are NULL are prevented. Fixes: 49ce92fbee0b ("pds_core: add FW update feature to devlink") Signed-off-by: Brett Creeley <brett.creeley@amd.com> Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://lore.kernel.org/r/20240129234035.69802-6-brett.creeley@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-31pds_core: Prevent race issues involving the adminqBrett Creeley3-6/+47
There are multiple paths that can result in using the pdsc's adminq. [1] pdsc_adminq_isr and the resulting work from queue_work(), i.e. pdsc_work_thread()->pdsc_process_adminq() [2] pdsc_adminq_post() When the device goes through reset via PCIe reset and/or a fw_down/fw_up cycle due to bad PCIe state or bad device state the adminq is destroyed and recreated. A NULL pointer dereference can happen if [1] or [2] happens after the adminq is already destroyed. In order to fix this, add some further state checks and implement reference counting for adminq uses. Reference counting was used because multiple threads can attempt to access the adminq at the same time via [1] or [2]. Additionally, multiple clients (i.e. pds-vfio-pci) can be using [2] at the same time. The adminq_refcnt is initialized to 1 when the adminq has been allocated and is ready to use. Users/clients of the adminq (i.e. [1] and [2]) will increment the refcnt when they are using the adminq. When the driver goes into a fw_down cycle it will set the PDSC_S_FW_DEAD bit and then wait for the adminq_refcnt to hit 1. Setting the PDSC_S_FW_DEAD before waiting will prevent any further adminq_refcnt increments. Waiting for the adminq_refcnt to hit 1 allows for any current users of the adminq to finish before the driver frees the adminq. Once the adminq_refcnt hits 1 the driver clears the refcnt to signify that the adminq is deleted and cannot be used. On the fw_up cycle the driver will once again initialize the adminq_refcnt to 1 allowing the adminq to be used again. Fixes: 01ba61b55b20 ("pds_core: Add adminq processing and commands") Signed-off-by: Brett Creeley <brett.creeley@amd.com> Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://lore.kernel.org/r/20240129234035.69802-5-brett.creeley@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-31pds_core: Use struct pdsc for the pdsc_adminq_isr private dataBrett Creeley2-3/+4
The initial design for the adminq interrupt was done based on client drivers having their own adminq and adminq interrupt. So, each client driver's adminq isr would use their specific adminqcq for the private data struct. For the time being the design has changed to only use a single adminq for all clients. So, instead use the struct pdsc for the private data to simplify things a bit. This also has the benefit of not dereferencing the adminqcq to access the pdsc struct when the PDSC_S_STOPPING_DRIVER bit is set and the adminqcq has actually been cleared/freed. Fixes: 01ba61b55b20 ("pds_core: Add adminq processing and commands") Signed-off-by: Brett Creeley <brett.creeley@amd.com> Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://lore.kernel.org/r/20240129234035.69802-4-brett.creeley@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-31pds_core: Cancel AQ work on teardownBrett Creeley1-0/+2
There is a small window where pdsc_work_thread() calls pdsc_process_adminq() and pdsc_process_adminq() passes the PDSC_S_STOPPING_DRIVER check and starts to process adminq/notifyq work and then the driver starts a fw_down cycle. This could cause some undefined behavior if the notifyqcq/adminqcq are free'd while pdsc_process_adminq() is running. Use cancel_work_sync() on the adminqcq's work struct to make sure any pending work items are cancelled and any in progress work items are completed. Also, make sure to not call cancel_work_sync() if the work item has not be initialized. Without this, traces will happen in cases where a reset fails and teardown is called again or if reset fails and the driver is removed. Fixes: 01ba61b55b20 ("pds_core: Add adminq processing and commands") Signed-off-by: Brett Creeley <brett.creeley@amd.com> Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://lore.kernel.org/r/20240129234035.69802-3-brett.creeley@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-31pds_core: Prevent health thread from running during reset/removeBrett Creeley1-2/+17
The PCIe reset handlers can run at the same time as the health thread. This can cause the health thread to stomp on the PCIe reset. Fix this by preventing the health thread from running while a PCIe reset is happening. As part of this use timer_shutdown_sync() during reset and remove to make sure the timer doesn't ever get rearmed. Fixes: ffa55858330f ("pds_core: implement pci reset handlers") Signed-off-by: Brett Creeley <brett.creeley@amd.com> Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://lore.kernel.org/r/20240129234035.69802-2-brett.creeley@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-31net: dsa: mv88e6xxx: Fix failed probe due to unsupported C45 readsAndrew Lunn1-1/+1
Not all mv88e6xxx device support C45 read/write operations. Those which do not return -EOPNOTSUPP. However, when phylib scans the bus, it considers this fatal, and the probe of the MDIO bus fails, which in term causes the mv88e6xxx probe as a whole to fail. When there is no device on the bus for a given address, the pull up resistor on the data line results in the read returning 0xffff. The phylib core code understands this when scanning for devices on the bus. C45 allows multiple devices to be supported at one address, so phylib will perform a few reads at each address, so although thought not the most efficient solution, it is a way to avoid fatal errors. Make use of this as a minimal fix for stable to fix the probing problems. Follow up patches will rework how C45 operates to make it similar to C22 which considers -ENODEV as a none-fatal, and swap mv88e6xxx to using this. Cc: stable@vger.kernel.org Fixes: 743a19e38d02 ("net: dsa: mv88e6xxx: Separate C22 and C45 transactions") Reported-by: Tim Menninger <tmenninger@purestorage.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20240129224948.1531452-1-andrew@lunn.ch Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-31wifi: fill in MODULE_DESCRIPTION()s for mt76 driversBreno Leitao29-0/+29
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the MediaTek mt76 drivers. Here is a sorted list of descriptions. It might make the reviewing process easier. MODULE_DESCRIPTION("MediaTek MT7603E and MT76x8 wireless driver"); MODULE_DESCRIPTION("MediaTek MT7615E and MT7663E wireless driver"); MODULE_DESCRIPTION("MediaTek MT7615E MMIO helpers"); MODULE_DESCRIPTION("MediaTek MT7663 SDIO/USB helpers"); MODULE_DESCRIPTION("MediaTek MT7663S (SDIO) wireless driver"); MODULE_DESCRIPTION("MediaTek MT7663U (USB) wireless driver"); MODULE_DESCRIPTION("MediaTek MT76x02 helpers"); MODULE_DESCRIPTION("MediaTek MT76x02 MCU helpers"); MODULE_DESCRIPTION("MediaTek MT76x0E (PCIe) wireless driver"); MODULE_DESCRIPTION("MediaTek MT76x0U (USB) wireless driver"); MODULE_DESCRIPTION("MediaTek MT76x2 EEPROM helpers"); MODULE_DESCRIPTION("MediaTek MT76x2E (PCIe) wireless driver"); MODULE_DESCRIPTION("MediaTek MT76x2U (USB) wireless driver"); MODULE_DESCRIPTION("MediaTek MT76x connac layer helpers"); MODULE_DESCRIPTION("MediaTek MT76x EEPROM helpers"); MODULE_DESCRIPTION("MediaTek MT76x helpers"); MODULE_DESCRIPTION("MediaTek MT76x SDIO helpers"); MODULE_DESCRIPTION("MediaTek MT76x USB helpers"); MODULE_DESCRIPTION("MediaTek MT7915E MMIO helpers"); MODULE_DESCRIPTION("MediaTek MT7921 core driver"); MODULE_DESCRIPTION("MediaTek MT7921E (PCIe) wireless driver"); MODULE_DESCRIPTION("MediaTek MT7921S (SDIO) wireless driver"); MODULE_DESCRIPTION("MediaTek MT7921U (USB) wireless driver"); MODULE_DESCRIPTION("MediaTek MT7925 core driver"); MODULE_DESCRIPTION("MediaTek MT7925E (PCIe) wireless driver"); MODULE_DESCRIPTION("MediaTek MT7925U (USB) wireless driver"); MODULE_DESCRIPTION("MediaTek MT792x core driver"); MODULE_DESCRIPTION("MediaTek MT792x USB helpers"); MODULE_DESCRIPTION("MediaTek MT7996 MMIO helpers"); Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240130104243.3025393-10-leitao@debian.org
2024-01-31wifi: fill in MODULE_DESCRIPTION()s for wilc1000Breno Leitao3-0/+3
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the Atmel WILC1000 SPI driver. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240130104243.3025393-9-leitao@debian.org
2024-01-31wifi: fill in MODULE_DESCRIPTION()s for wl18xxBreno Leitao1-0/+1
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the TI WiLink 8 wireless driver. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240130104243.3025393-8-leitao@debian.org
2024-01-31wifi: fill in MODULE_DESCRIPTION()s for p54spiBreno Leitao1-0/+1
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the Prism54 SPI wireless driver. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240130104243.3025393-7-leitao@debian.org
2024-01-31wifi: fill in MODULE_DESCRIPTION()s for wcn36xxBreno Leitao1-0/+1
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the Qualcomm Atheros WCN3660/3680 wireless driver. Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240130104243.3025393-6-leitao@debian.org
2024-01-31wifi: fill in MODULE_DESCRIPTION()s for ar5523Breno Leitao1-0/+1
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the Atheros AR5523 wireless driver. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240130104243.3025393-5-leitao@debian.org
2024-01-31wifi: fill in MODULE_DESCRIPTION()s for Broadcom WLANBreno Leitao3-0/+3
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the Broadcom FullMac WLAN drivers. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240130104243.3025393-4-leitao@debian.org
2024-01-31wifi: fill in MODULE_DESCRIPTION()s for wl1251 and wl12xxBreno Leitao3-0/+3
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the TI wireless drivers wl12xx and wl1251. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240130104243.3025393-3-leitao@debian.org
2024-01-31wifi: fill in MODULE_DESCRIPTION()s for wlcoreBreno Leitao3-0/+3
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to the TI WLAN wlcore drivers. Signed-off-by: Breno Leitao <leitao@debian.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240130104243.3025393-2-leitao@debian.org
2024-01-30Merge branch '1GbE' of ↵Jakub Kicinski3-8/+37
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-01-29 (e1000e, ixgbe) This series contains updates to e1000e and ixgbe drivers. Jake corrects values used for maximum frequency adjustment for e1000e. Christophe Jaillet adjusts error handling path so that semaphore is released on ixgbe. * '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ixgbe: Fix an error handling path in ixgbe_read_iosf_sb_reg_x550() e1000e: correct maximum frequency adjustment values ==================== Link: https://lore.kernel.org/r/20240129185240.787397-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-30net: stmmac: dwmac-imx: set TSO/TBS TX queues default settingsEsben Haabendal1-0/+4
TSO and TBS cannot coexist. For now we set i.MX Ethernet QOS controller to use the first TX queue with TSO and the rest for TBS. TX queues with TBS can support etf qdisc hw offload. Signed-off-by: Esben Haabendal <esben@geanix.com> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-01-30net: stmmac: do not clear TBS enable bit on link up/downEsben Haabendal1-0/+3
With the dma conf being reallocated on each call to stmmac_open(), any information in there is lost, unless we specifically handle it. The STMMAC_TBS_EN bit is set when adding an etf qdisc, and the etf qdisc therefore would stop working when link was set down and then back up. Fixes: ba39b344e924 ("net: ethernet: stmicro: stmmac: generate stmmac dma conf before open") Cc: stable@vger.kernel.org Signed-off-by: Esben Haabendal <esben@geanix.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-01-29net: dsa: qca8k: fix illegal usage of GPIOMichal Vokáč1-2/+1
When working with GPIO, its direction must be set either when the GPIO is requested by gpiod_get*() or later on by one of the gpiod_direction_*() functions. Neither of this is done here which results in undefined behavior on some systems. As the reset GPIO is used right after it is requested here, it makes sense to configure it as GPIOD_OUT_HIGH right away. With that, the following gpiod_set_value_cansleep(1) becomes redundant and can be safely removed. Fixes: a653f2f538f9 ("net: dsa: qca8k: introduce reset via gpio feature") Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/1706266175-3408-1-git-send-email-michal.vokac@ysoft.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-29ixgbe: Fix an error handling path in ixgbe_read_iosf_sb_reg_x550()Christophe JAILLET1-1/+2
All error handling paths, except this one, go to 'out' where release_swfw_sync() is called. This call balances the acquire_swfw_sync() call done at the beginning of the function. Branch to the error handling path in order to correctly release some resources in case of error. Fixes: ae14a1d8e104 ("ixgbe: Fix IOSF SB access issues") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-01-29e1000e: correct maximum frequency adjustment valuesJacob Keller2-7/+35
The e1000e driver supports hardware with a variety of different clock speeds, and thus a variety of different increment values used for programming its PTP hardware clock. The values currently programmed in e1000e_ptp_init are incorrect. In particular, only two maximum adjustments are used: 24000000 - 1, and 600000000 - 1. These were originally intended to be used with the 96 MHz clock and the 25 MHz clock. Both of these values are actually slightly too high. For the 96 MHz clock, the actual maximum value that can safely be programmed is 23,999,938. For the 25 MHz clock, the maximum value is 599,999,904. Worse, several devices use a 24 MHz clock or a 38.4 MHz clock. These parts are incorrectly assigned one of either the 24million or 600million values. For the 24 MHz clock, this is not a significant issue: its current increment value can support an adjustment up to 7billion in the positive direction. However, the 38.4 KHz clock uses an increment value which can only support up to 230,769,157 before it starts overflowing. To understand where these values come from, consider that frequency adjustments have the form of: new_incval = base_incval + (base_incval * adjustment) / (unit of adjustment) The maximum adjustment is reported in terms of parts per billion: new_incval = base_incval + (base_incval * adjustment) / 1 billion The largest possible adjustment is thus given by the following: max_incval = base_incval + (base_incval * max_adj) / 1 billion Re-arranging to solve for max_adj: max_adj = (max_incval - base_incval) * 1 billion / base_incval We also need to ensure that negative adjustments cannot underflow. This can be achieved simply by ensuring max_adj is always less than 1 billion. Introduce new macros in e1000.h codifying the maximum adjustment in PPB for each frequency given its associated increment values. Also clarify where these values come from by commenting about the above equations. Replace the switch statement in e1000e_ptp_init with one which mirrors the increment value switch statement from e1000e_get_base_timinica. For each device, assign the appropriate maximum adjustment based on its frequency. Some parts can have one of two frequency modes as determined by E1000_TSYNCRXCTL_SYSCFI. Since the new flow directly matches the assignments in e1000e_get_base_timinca, and uses well defined macro names, it is much easier to verify that the resulting maximum adjustments are correct. It also avoids difficult to parse construction such as the "hw->mac.type < e1000_phc_lpt", and the use of fallthrough which was especially confusing when combined with a conditional block. Note that I believe the current increment value configuration used for 24MHz clocks is sub-par, as it leaves at least 3 extra bits available in the INCVALUE register. However, fixing that requires more careful review of the clock rate and associated values. Reported-by: Trey Harrison <harrisondigitalmedia@gmail.com> Fixes: 68fe1d5da548 ("e1000e: Add Support for 38.4MHZ frequency") Fixes: d89777bf0e42 ("e1000e: add support for IEEE-1588 PTP") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-01-27net: lan966x: Fix port configuration when using SGMII interfaceHoratiu Vultur1-2/+3
In case the interface between the MAC and the PHY is SGMII, then the bit GIGA_MODE on the MAC side needs to be set regardless of the speed at which it is running. Fixes: d28d6d2e37d1 ("net: lan966x: add port module support") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-20 16:57:22 +0000