summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/marvell
AgeCommit message (Collapse)AuthorFilesLines
2020-07-19net: mvneta: move rxq->left_size on the stackLorenzo Bianconi1-16/+13
Allocate rxq->left_size on mvneta_rx_swbm stack since it is used just in sw bm napi_poll Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19net: mvneta: get rid of skb in mvneta_rx_queueLorenzo Bianconi1-6/+0
Remove skb pointer in mvneta_rx_queue data structure since it is no longer used Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19net: mvneta: drop all fragments in XDP_DROPLorenzo Bianconi1-14/+12
Release all consumed pages if the eBPF program returns XDP_DROP for XDP multi-buffers Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19net: mvneta: move mvneta_run_xdp after descriptors processingLorenzo Bianconi1-15/+7
Move mvneta_run_xdp routine after all descriptor processing. This is a preliminary patch to enable multi-buffers and JUMBO frames support for XDP Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19net: mvneta: move skb build after descriptors processingLorenzo Bianconi1-57/+101
Move skb build after all descriptors processing. This is a preliminary patch to enable multi-buffers and JUMBO frames support for XDP. Introduce mvneta_xdp_put_buff routine to release all pages used by a XDP multi-buffer Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-12net: sky2: switch from 'pci_' to 'dma_' APIChristophe JAILLET1-42/+45
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GPF_ with a correct flag. It has been compile tested. When memory is allocated in 'sky2_alloc_buffers()', GFP_KERNEL can be used because some other memory allocations in the same function already use this flag. When memory is allocated in 'sky2_probe()', GFP_KERNEL can be used because another memory allocations in the same function already uses this flag. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-12net: skge: switch from 'pci_' to 'dma_' APIChristophe JAILLET1-40/+36
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GPF_ with a correct flag. It has been compile tested. When memory is allocated in 'skge_up()', GFP_KERNEL can be used because some other memory allocations done a few lines below in 'skge_ring_alloc()' already use this flag. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller2-2/+2
All conflicts seemed rather trivial, with some guidance from Saeed Mameed on the tc_ct.c one. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-07net: sky2: initialize return of gm_phy_readTom Rix1-1/+1
clang static analysis flags this garbage return drivers/net/ethernet/marvell/sky2.c:208:2: warning: Undefined or garbage value returned to caller [core.uninitialized.UndefReturn] return v; ^~~~~~~~ static inline u16 gm_phy_read( ... { u16 v; __gm_phy_read(hw, port, reg, &v); return v; } __gm_phy_read can return without setting v. So handle similar to skge.c's gm_phy_read, initialize v. Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-07mvpp2: fix pointer checkMatteo Croce1-3/+12
priv->page_pool is an array, so comparing against it will always return true. Do a meaningful check by checking priv->page_pool[0] instead. While at it, clear the page_pool pointers on deallocation, or when an allocation error happens during init. Reported-by: Colin Ian King <colin.king@canonical.com> Fixes: c2d6fe6163de ("mvpp2: XDP TX support") Signed-off-by: Matteo Croce <mcroce@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-03mvpp2: xdp ethtool statsSven Auhagen2-18/+148
Add ethtool statistics for XDP. Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-03mvpp2: XDP TX supportMatteo Croce2-45/+272
Add the transmit part of XDP support, which includes: - support for XDP_TX in mvpp2_xdp() - .ndo_xdp_xmit hook for AF_XDP and XDP_REDIRECT with mvpp2 as destination mvpp2_xdp_submit_frame() is a generic function which is called by mvpp2_xdp_xmit_back() when doing XDP_TX, and by mvpp2_xdp_xmit when doing AF_XDP or XDP_REDIRECT target. The buffer allocation has been reworked to be able to map the buffers as DMA_FROM_DEVICE or DMA_BIDIRECTIONAL depending if native XDP is in use or not. Co-developed-by: Sven Auhagen <sven.auhagen@voleatech.de> Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de> Signed-off-by: Matteo Croce <mcroce@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-03mvpp2: add basic XDP supportMatteo Croce2-8/+185
Add XDP native support. By now only XDP_DROP, XDP_PASS and XDP_REDIRECT verdicts are supported. Co-developed-by: Sven Auhagen <sven.auhagen@voleatech.de> Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de> Signed-off-by: Matteo Croce <mcroce@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-03mvpp2: use page_pool allocatorMatteo Croce3-25/+140
Use the page_pool API for memory management. This is a prerequisite for native XDP support. Tested-by: Sven Auhagen <sven.auhagen@voleatech.de> Signed-off-by: Matteo Croce <mcroce@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-03mvpp2: refactor BM pool init percpu codeMatteo Croce1-12/+11
In mvpp2_swf_bm_pool_init_percpu(), a reference to a struct mvpp2_bm_pool is obtained traversing multiple structs, when a local variable already points to the same object. Fix it and, while at it, give the variable a meaningful name. Signed-off-by: Matteo Croce <mcroce@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-30net: mvneta: fix use of state->speedRussell King1-1/+1
When support for short preambles was added, it incorrectly keyed its decision off state->speed instead of state->interface. state->speed is not guaranteed to be correct for in-band modes, which can lead to short preambles being unexpectedly disabled. Fix this by keying off the interface mode, which is the only way that mvneta can operate at 2.5Gbps. Fixes: da58a931f248 ("net: mvneta: Add support for 2500Mbps SGMII") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-26net: mvneta: speed down the PHY, if WoL used, to save energyDaniel González Cabanelas1-0/+11
Some PHYs connected to this ethernet hardware support the WoL feature. But when WoL is enabled and the machine is powered off, the PHY remains waiting for a magic packet at max speed (i.e. 1Gbps), which is a waste of energy. Slow down the PHY speed before stopping the ethernet if WoL is enabled, and save some energy while the machine is powered off or sleeping. Tested using an Armada 370 based board (LS421DE) equipped with a Marvell 88E1518 PHY. Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-23/+53
Minor overlapping changes in xfrm_device.c, between the double ESP trailing bug fix setting the XFRM_INIT flag and the changes in net-next preparing for bonding encryption support. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-24net: ethernet: mvneta: Add back interface mode validationSascha Hauer1-3/+19
When writing the serdes configuration register was moved to mvneta_config_interface() the whole code block was removed from mvneta_port_power_up() in the assumption that its only purpose was to write the serdes configuration register. As mentioned by Russell King its purpose was also to check for valid interface modes early so that later in the driver we do not have to care for unexpected interface modes. Add back the test to let the driver bail out early on unhandled interface modes. Fixes: b4748553f53f ("net: ethernet: mvneta: Fix Serdes configuration for SoCs without comphy") Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-24net: ethernet: mvneta: Do not error out in non serdes modesSascha Hauer1-1/+1
In mvneta_config_interface() the RGMII modes are catched by the default case which is an error return. The RGMII modes are valid modes for the driver, so instead of returning an error add a break statement to return successfully. This avoids this warning for non comphy SoCs which use RGMII, like SolidRun Clearfog: WARNING: CPU: 0 PID: 268 at drivers/net/ethernet/marvell/mvneta.c:3512 mvneta_start_dev+0x220/0x23c Fixes: b4748553f53f ("net: ethernet: mvneta: Fix Serdes configuration for SoCs without comphy") Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-20net: mvpp2: set xlg flow control in mvpp2_mac_link_up()Russell King1-12/+11
Set the flow control settings in mvpp2_mac_link_up() for 10G links just as we do for 1G and slower links. This is now the preferred location. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-20net: mvpp2: add register modification helperRussell King1-42/+46
Add a helper to read-modify-write a register, and use it in the phylink helpers. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-20net: mvpp2: add mvpp2_phylink_to_port() helperRussell King1-15/+14
Add a helper to convert the struct phylink_config pointer passed in from phylink to the drivers internal struct mvpp2_port. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-20net: mvpp2: add port support helpersRussell King1-16/+27
The mvpp2 code has tests scattered amongst the code to determine whether the port supports the XLG, and whether the port supports RGMII mode. Rather than having these tests scattered, provide a couple of helper functions, so that future additions can ensure that they get these tests correct. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-18net: tso: cache transport header lengthEric Dumazet4-12/+10
Add tlen field into struct tso_t, and change tso_start() to return skb_transport_offset(skb) + tso->tlen This removes from callers the need to use tcp_hdrlen(skb) and will ease UDP segmentation offload addition. v2: calls tso_start() earlier in otx2_sq_append_tso() [Jakub] Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-18octeontx2-af: change (struct qmem)->entry_sz from u8 to u16Eric Dumazet1-1/+1
We need to increase TSO_HEADER_SIZE from 128 to 256. Since otx2_sq_init() calls qmem_alloc() with TSO_HEADER_SIZE, we need to change (struct qmem)->entry_sz to avoid truncation to 0. Fixes: 7a37245ef23f ("octeontx2-af: NPA block admin queue init") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-18net: ethernet: mvneta: Add 2500BaseX support for SoCs without comphySascha Hauer1-0/+6
The older SoCs like Armada XP support a 2500BaseX mode in the datasheets referred to as DR-SGMII (Double rated SGMII) or HS-SGMII (High Speed SGMII). This is an upclocked 1000BaseX mode, thus PHY_INTERFACE_MODE_2500BASEX is the appropriate mode define for it. adding support for it merely means writing the correct magic value into the MVNETA_SERDES_CFG register. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-18net: ethernet: mvneta: Fix Serdes configuration for SoCs without comphySascha Hauer1-36/+44
The MVNETA_SERDES_CFG register is only available on older SoCs like the Armada XP. On newer SoCs like the Armada 38x the fields are moved to comphy. This patch moves the writes to this register next to the comphy initialization, so that depending on the SoC either comphy or MVNETA_SERDES_CFG is configured. With this we no longer write to the MVNETA_SERDES_CFG on SoCs where it doesn't exist. Suggested-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-16mvpp2: remove module bugfixSven Auhagen1-2/+5
The remove function does not destroy all BM Pools when per cpu pool is active. When reloading the mvpp2 as a module the BM Pools are still active in hardware and due to the bug have twice the size now old + new. This eventually leads to a kernel crash. v2: * add Fixes tag Fixes: 7d04b0b13b11 ("mvpp2: percpu buffers") Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-15mvpp2: ethtool rxtx stats fixSven Auhagen1-2/+2
The ethtool rx and tx queue statistics are reporting wrong values. Fix reading out the correct ones. Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds1-0/+13
Pull networking fixes from David Miller: 1) Fix cfg80211 deadlock, from Johannes Berg. 2) RXRPC fails to send norigications, from David Howells. 3) MPTCP RM_ADDR parsing has an off by one pointer error, fix from Geliang Tang. 4) Fix crash when using MSG_PEEK with sockmap, from Anny Hu. 5) The ucc_geth driver needs __netdev_watchdog_up exported, from Valentin Longchamp. 6) Fix hashtable memory leak in dccp, from Wang Hai. 7) Fix how nexthops are marked as FDB nexthops, from David Ahern. 8) Fix mptcp races between shutdown and recvmsg, from Paolo Abeni. 9) Fix crashes in tipc_disc_rcv(), from Tuong Lien. 10) Fix link speed reporting in iavf driver, from Brett Creeley. 11) When a channel is used for XSK and then reused again later for XSK, we forget to clear out the relevant data structures in mlx5 which causes all kinds of problems. Fix from Maxim Mikityanskiy. 12) Fix memory leak in genetlink, from Cong Wang. 13) Disallow sockmap attachments to UDP sockets, it simply won't work. From Lorenz Bauer. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits) net: ethernet: ti: ale: fix allmulti for nu type ale net: ethernet: ti: am65-cpsw-nuss: fix ale parameters init net: atm: Remove the error message according to the atomic context bpf: Undo internal BPF_PROBE_MEM in BPF insns dump libbpf: Support pre-initializing .bss global variables tools/bpftool: Fix skeleton codegen bpf: Fix memlock accounting for sock_hash bpf: sockmap: Don't attach programs to UDP sockets bpf: tcp: Recv() should return 0 when the peer socket is closed ibmvnic: Flush existing work items before device removal genetlink: clean up family attributes allocations net: ipa: header pad field only valid for AP->modem endpoint net: ipa: program upper nibbles of sequencer type net: ipa: fix modem LAN RX endpoint id net: ipa: program metadata mask differently ionic: add pcie_print_link_status rxrpc: Fix race between incoming ACK parser and retransmitter net/mlx5: E-Switch, Fix some error pointer dereferences net/mlx5: Don't fail driver on failure to create debugfs net/mlx5e: CT: Fix ipv6 nat header rewrite actions ...
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada2-13/+13
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-09net: mvneta: do not redirect frames during reconfigurationLorenzo Bianconi1-0/+13
Disable frames injection in mvneta_xdp_xmit routine during hw re-configuration in order to avoid hardware hangs Fixes: b0a43db9087a ("net: mvneta: add XDP_TX support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-09mm: reorder includes after introduction of linux/pgtable.hMike Rapoport1-1/+1
The replacement of <asm/pgrable.h> with <linux/pgtable.h> made the include of the latter in the middle of asm includes. Fix this up with the aid of the below script and manual adjustments here and there. import sys import re if len(sys.argv) is not 3: print "USAGE: %s <file> <header>" % (sys.argv[0]) sys.exit(1) hdr_to_move="#include <linux/%s>" % sys.argv[2] moved = False in_hdrs = False with open(sys.argv[1], "r") as f: lines = f.readlines() for _line in lines: line = _line.rstrip(' ') if line == hdr_to_move: continue if line.startswith("#include <linux/"): in_hdrs = True elif not moved and in_hdrs: moved = True print hdr_to_move print line Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-4-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09mm: introduce include/linux/pgtable.hMike Rapoport1-1/+1
The include/linux/pgtable.h is going to be the home of generic page table manipulation functions. Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and make the latter include asm/pgtable.h. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-05net: ethernet: mvneta: fix MVNETA_SKB_HEADROOM alignmentAlexander Lobakin1-1/+1
Commit ca23cb0bc50f ("mvneta: MVNETA_SKB_HEADROOM set last 3 bits to zero") added headroom alignment check against 8. Hovewer (if we imagine that NET_SKB_PAD or XDP_PACKET_HEADROOM is not aligned to cacheline size), it actually aligns headroom down, while skb/xdp_buff headroom should be *at least* equal to one of the values (depending on XDP prog presence). So, fix the check to align the value up. This satisfies both hardware/driver and network stack requirements. Fixes: ca23cb0bc50f ("mvneta: MVNETA_SKB_HEADROOM set last 3 bits to zero") Signed-off-by: Alexander Lobakin <bloodyreaper@yandex.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-01xdp: Rename convert_to_xdp_frame in xdp_convert_buff_to_frameLorenzo Bianconi1-1/+1
In order to use standard 'xdp' prefix, rename convert_to_xdp_frame utility routine in xdp_convert_buff_to_frame and replace all the occurrences Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Link: https://lore.kernel.org/bpf/6344f739be0d1a08ab2b9607584c4d5478c8c083.1590698295.git.lorenzo@kernel.org
2020-05-25mvneta: MVNETA_SKB_HEADROOM set last 3 bits to zeroSven Auhagen1-1/+2
For XDP the MVNETA_SKB_HEADROOM is used as an offset for the received data. The MVNETA manual states that the last 3 bits assumed to be 0. This is currently the case but lets make it explicit in the definition to prevent future problems. Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller2-2/+2
The MSCC bug fix in 'net' had to be slightly adjusted because the register accesses are done slightly differently in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-23net: Fix return value about devm_platform_ioremap_resource()Tiezhu Yang1-1/+1
When call function devm_platform_ioremap_resource(), we should use IS_ERR() to check the return value and return PTR_ERR() if failed. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-22Revert "net: mvneta: speed down the PHY, if WoL used, to save energy"David S. Miller1-11/+0
This reverts commit 5e3768a436bb70c9c3e27aaba6b73f8ef8f5dcf3. On request from Russell King, this is a layering violation. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-22net: mvpp2: fix RX hashing for non-10G portsRussell King1-1/+1
When rxhash is enabled on any ethernet port except the first in each CP block, traffic flow is prevented. The analysis is below: I've been investigating this afternoon, and what I've found, comparing a kernel without 895586d5dc32 and with 895586d5dc32 applied is: - The table programmed into the hardware via mvpp22_rss_fill_table() appears to be identical with or without the commit. - When rxhash is enabled on eth2, mvpp2_rss_port_c2_enable() reports that c2.attr[0] and c2.attr[2] are written back containing: - with 895586d5dc32, failing: 00200000 40000000 - without 895586d5dc32, working: 04000000 40000000 - When disabling rxhash, c2.attr[0] and c2.attr[2] are written back as: 04000000 00000000 The second value represents the MVPP22_CLS_C2_ATTR2_RSS_EN bit, the first value is the queue number, which comprises two fields. The high 5 bits are 24:29 and the low three are 21:23 inclusive. This comes from: c2.attr[0] = MVPP22_CLS_C2_ATTR0_QHIGH(qh) | MVPP22_CLS_C2_ATTR0_QLOW(ql); So, the working case gives eth2 a queue id of 4.0, or 32 as per port->first_rxq, and the non-working case a queue id of 0.1, or 1. The allocation of queue IDs seems to be in mvpp2_port_probe(): if (priv->hw_version == MVPP21) port->first_rxq = port->id * port->nrxqs; else port->first_rxq = port->id * priv->max_port_rxqs; Where: if (priv->hw_version == MVPP21) priv->max_port_rxqs = 8; else priv->max_port_rxqs = 32; Making the port 0 (eth0 / eth1) have port->first_rxq = 0, and port 1 (eth2) be 32. It seems the idea is that the first 32 queues belong to port 0, the second 32 queues belong to port 1, etc. mvpp2_rss_port_c2_enable() gets the queue number from it's parameter, 'ctx', which comes from mvpp22_rss_ctx(port, 0). This returns port->rss_ctx[0]. mvpp22_rss_context_create() is responsible for allocating that, which it does by looking for an unallocated priv->rss_tables[] pointer. This table is shared amongst all ports on the CP silicon. When we write the tables in mvpp22_rss_fill_table(), the RSS table entry is defined by: u32 sel = MVPP22_RSS_INDEX_TABLE(rss_ctx) | MVPP22_RSS_INDEX_TABLE_ENTRY(i); where rss_ctx is the context ID (queue number) and i is the index in the table. If we look at what is written: - The first table to be written has "sel" values of 00000000..0000001f, containing values 0..3. This appears to be for eth1. This is table 0, RX queue number 0. - The second table has "sel" values of 00000100..0000011f, and appears to be for eth2. These contain values 0x20..0x23. This is table 1, RX queue number 0. - The third table has "sel" values of 00000200..0000021f, and appears to be for eth3. These contain values 0x40..0x43. This is table 2, RX queue number 0. How do queue numbers translate to the RSS table? There is another table - the RXQ2RSS table, indexed by the MVPP22_RSS_INDEX_QUEUE field of MVPP22_RSS_INDEX and accessed through the MVPP22_RXQ2RSS_TABLE register. Before 895586d5dc32, it was: mvpp2_write(priv, MVPP22_RSS_INDEX, MVPP22_RSS_INDEX_QUEUE(port->first_rxq)); mvpp2_write(priv, MVPP22_RXQ2RSS_TABLE, MVPP22_RSS_TABLE_POINTER(port->id)); and after: mvpp2_write(priv, MVPP22_RSS_INDEX, MVPP22_RSS_INDEX_QUEUE(ctx)); mvpp2_write(priv, MVPP22_RXQ2RSS_TABLE, MVPP22_RSS_TABLE_POINTER(ctx)); Before the commit, for eth2, that would've contained '32' for the index and '1' for the table pointer - mapping queue 32 to table 1. Remember that this is queue-high.queue-low of 4.0. After the commit, we appear to map queue 1 to table 1. That again looks fine on the face of it. Section 9.3.1 of the A8040 manual seems indicate the reason that the queue number is separated. queue-low seems to always come from the classifier, whereas queue-high can be from the ingress physical port number or the classifier depending on the MVPP2_CLS_SWFWD_PCTRL_REG. We set the port bit in MVPP2_CLS_SWFWD_PCTRL_REG, meaning that queue-high comes from the MVPP2_CLS_SWFWD_P2HQ_REG() register... and this seems to be where our bug comes from. mvpp2_cls_oversize_rxq_set() sets this up as: mvpp2_write(port->priv, MVPP2_CLS_SWFWD_P2HQ_REG(port->id), (port->first_rxq >> MVPP2_CLS_OVERSIZE_RXQ_LOW_BITS)); val = mvpp2_read(port->priv, MVPP2_CLS_SWFWD_PCTRL_REG); val |= MVPP2_CLS_SWFWD_PCTRL_MASK(port->id); mvpp2_write(port->priv, MVPP2_CLS_SWFWD_PCTRL_REG, val); Setting the MVPP2_CLS_SWFWD_PCTRL_MASK bit means that the queue-high for eth2 is _always_ 4, so only queues 32 through 39 inclusive are available to eth2. Yet, we're trying to tell the classifier to set queue-high, which will be ignored, to zero. Hence, the queue-high field (MVPP22_CLS_C2_ATTR0_QHIGH()) from the classifier will be ignored. This means we end up directing traffic from eth2 not to queue 1, but to queue 33, and then we tell it to look up queue 33 in the RSS table. However, RSS table has not been programmed for queue 33, and so it ends up (presumably) dropping the packets. It seems that mvpp22_rss_context_create() doesn't take account of the fact that the upper 5 bits of the queue ID can't actually be changed due to the settings in mvpp2_cls_oversize_rxq_set(), _or_ it seems that mvpp2_cls_oversize_rxq_set() has been missed in this commit. Either way, these two functions mutually disagree with what queue number should be used. Looking deeper into what mvpp2_cls_oversize_rxq_set() and the MTU validation is doing, it seems that MVPP2_CLS_SWFWD_P2HQ_REG() is used for over-sized packets attempting to egress through this port. With the classifier having had RSS enabled and directing eth2 traffic to queue 1, we may still have packets appearing on queue 32 for this port. However, the only way we may end up with over-sized packets attempting to egress through eth2 - is if the A8040 forwards frames between its ports. From what I can see, we don't support that feature, and the kernel restricts the egress packet size to the MTU. In any case, if we were to attempt to transmit an oversized packet, we have no support in the kernel to deal with that appearing in the port's receive queue. So, this patch attempts to solve the issue by clearing the MVPP2_CLS_SWFWD_PCTRL_MASK() bit, allowing MVPP22_CLS_C2_ATTR0_QHIGH() from the classifier to define the queue-high field of the queue number. My testing seems to confirm my findings above - clearing this bit means that if I enable rxhash on eth2, the interface can then pass traffic, as we are now directing traffic to RX queue 1 rather than queue 33. Traffic still seems to work with rxhash off as well. Reported-by: Matteo Croce <mcroce@redhat.com> Tested-by: Matteo Croce <mcroce@redhat.com> Fixes: 895586d5dc32 ("net: mvpp2: cls: Use RSS contexts to handle RSS tables") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-2/+6
Move the bpf verifier trace check into the new switch statement in HEAD. Resolve the overlapping changes in hinic, where bug fixes overlap the addition of VF support. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-14mvneta: Add XDP frame size to driverJesper Dangaard Brouer1-10/+15
This marvell driver mvneta uses PAGE_SIZE frames, which makes it really easy to convert. Driver updates rxq and now frame_sz once per NAPI call. This driver takes advantage of page_pool PP_FLAG_DMA_SYNC_DEV that can help reduce the number of cache-lines that need to be flushed when doing DMA sync for_device. Due to xdp_adjust_tail can grow the area accessible to the by the CPU (can possibly write into), then max sync length *after* bpf_prog_run_xdp() needs to be taken into account. For XDP_TX action the driver is smart and does DMA-sync. When growing tail this is still safe, because page_pool have DMA-mapped the entire page size. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Lorenzo Bianconi <lorenzo@kernel.org> Cc: thomas.petazzoni@bootlin.com Link: https://lore.kernel.org/bpf/158945335786.97035.12714388304493736747.stgit@firesoul
2020-05-13net: mvneta: speed down the PHY, if WoL used, to save energyDaniel González Cabanelas1-0/+11
Some PHYs connected to this ethernet hardware support the WoL feature. But when WoL is enabled and the machine is powered off, the PHY remains waiting for a magic packet at max speed (i.e. 1Gbps), which is a waste of energy. Slow down the PHY speed before stopping the ethernet if WoL is enabled, and save some energy while the machine is powered off or sleeping. Tested using an Armada 370 based board (LS421DE) equipped with a Marvell 88E1518 PHY. Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-09octeontx2-pf: Use the napi_alloc_frag() to alloc the pool buffersKevin Hao4-50/+24
In the current codes, the octeontx2 uses its own method to allocate the pool buffers, but there are some issues in this implementation. 1. We have to run the otx2_get_page() for each allocation cycle and this is pretty error prone. As I can see there is no invocation of the otx2_get_page() in otx2_pool_refill_task(), this will leave the allocated pages have the wrong refcount and may be freed wrongly. 2. It wastes memory. For example, if we only receive one packet in a NAPI RX cycle, and then allocate a 2K buffer with otx2_alloc_rbuf() to refill the pool buffers and leave the remain area of the allocated page wasted. On a kernel with 64K page, 62K area is wasted. IMHO it is really unnecessary to implement our own method for the buffers allocate, we can reuse the napi_alloc_frag() to simplify our code. Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-08octeontx2-vf: Fix error return code in otx2vf_probe()Wei Yongjun1-2/+6
Fix to return negative error code -ENOMEM from the alloc failed error handling case instead of 0, as done elsewhere in this function. Fixes: 3184fb5ba96e ("octeontx2-vf: Virtual function driver support") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller2-0/+5
Conflicts were all overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06net: mvpp2: cls: Prevent buffer overflow in mvpp2_ethtool_cls_rule_del()Dan Carpenter1-0/+3
The "info->fs.location" is a u32 that comes from the user via the ethtool_set_rxnfc() function. We need to check for invalid values to prevent a buffer overflow. I copy and pasted this check from the mvpp2_ethtool_cls_rule_ins() function. Fixes: 90b509b39ac9 ("net: mvpp2: cls: Add Classification offload support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06net: mvpp2: prevent buffer overflow in mvpp22_rss_ctx()Dan Carpenter1-0/+2
The "rss_context" variable comes from the user via ethtool_get_rxfh(). It can be any u32 value except zero. Eventually it gets passed to mvpp22_rss_ctx() and if it is over MVPP22_N_RSS_TABLES (8) then it results in an array overflow. Fixes: 895586d5dc32 ("net: mvpp2: cls: Use RSS contexts to handle RSS tables") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-14 01:40:23 +0000