summaryrefslogtreecommitdiff
path: root/drivers/mtd
AgeCommit message (Collapse)AuthorFilesLines
2014-10-18Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds2-2/+2
Pull slave-dmaengine updates from Vinod Koul: "For dmaengine contributions we have: - designware cleanup by Andy - my series moving device_control users to dmanegine_xxx APIs for later removal of device_control API - minor fixes spread over drivers mainly mv_xor, pl330, mmp, imx-sdma etc" * 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (60 commits) serial: atmel: add missing dmaengine header dmaengine: remove FSLDMA_EXTERNAL_START dmaengine: freescale: remove FSLDMA_EXTERNAL_START control method carma-fpga: move to fsl_dma_external_start() carma-fpga: use dmaengine_xxx() API dmaengine: freescale: add and export fsl_dma_external_start() dmaengine: add dmaengine_prep_dma_sg() helper video: mx3fb: use dmaengine_terminate_all() API serial: sh-sci: use dmaengine_terminate_all() API net: ks8842: use dmaengine_terminate_all() API mtd: sh_flctl: use dmaengine_terminate_all() API mtd: fsmc_nand: use dmaengine_terminate_all() API V4L2: mx3_camer: use dmaengine_pause() API dmaengine: coh901318: use dmaengine_terminate_all() API pata_arasan_cf: use dmaengine_terminate_all() API dmaengine: edma: check for echan->edesc => NULL in edma_dma_pause() dmaengine: dw: export probe()/remove() and Co to users dmaengine: dw: enable and disable controller when needed dmaengine: dw: always export dw_dma_{en,dis}able dmaengine: dw: introduce dw_dma_on() helper ...
2014-10-18Merge branch 'for-3.18/drivers' of git://git.kernel.dk/linux-blockLinus Torvalds1-0/+1
Pull block layer driver update from Jens Axboe: "This is the block driver pull request for 3.18. Not a lot in there this round, and nothing earth shattering. - A round of drbd fixes from the linbit team, and an improvement in asender performance. - Removal of deprecated (and unused) IRQF_DISABLED flag in rsxx and hd from Michael Opdenacker. - Disable entropy collection from flash devices by default, from Mike Snitzer. - A small collection of xen blkfront/back fixes from Roger Pau Monné and Vitaly Kuznetsov" * 'for-3.18/drivers' of git://git.kernel.dk/linux-block: block: disable entropy contributions for nonrot devices xen, blkfront: factor out flush-related checks from do_blkif_request() xen-blkback: fix leak on grant map error path xen/blkback: unmap all persistent grants when frontend gets disconnected rsxx: Remove deprecated IRQF_DISABLED block: hd: remove deprecated IRQF_DISABLED drbd: use RB_DECLARE_CALLBACKS() to define augment callbacks drbd: compute the end before rb_insert_augmented() drbd: Add missing newline in resync progress display in /proc/drbd drbd: reduce lock contention in drbd_worker drbd: Improve asender performance drbd: Get rid of the WORK_PENDING macro drbd: Get rid of the __no_warn and __cond_lock macros drbd: Avoid inconsistent locking warning drbd: Remove superfluous newline from "resync_extents" debugfs entry. drbd: Use consistent names for all the bi_end_io callbacks drbd: Use better variable names
2014-10-18Merge tag 'for-linus-20141015' of git://git.infradead.org/linux-mtdLinus Torvalds37-549/+710
Pull MTD update from Brian Norris: "Sorry for delaying this a bit later than usual. There's one mild regression from 3.16 that was noticed during the 3.17 cycle, and I meant to send a fix for it along with this pull request. I'll probably try to queue it up for a later pull request once I've had a better look at it, hopefully by -rc2 at the latest. Summary for this pull: NAND - Cleanup for Denali driver - Atmel: add support for new page sizes - Atmel: fix up 'raw' mode support - Atmel: miscellaneous cleanups - New timing mode helpers for non-ONFI NAND - OMAP: allow driver to be (properly) built as a module - bcm47xx: RESET support and other cleanups SPI NOR - Miscellaneous cleanups, to prepare framework for wider use (some further work still pending) - Compile-time configuration to select 4K vs. 64K support for flash that support both (necessary for using UBIFS on some SPI NOR) A few scattered code quality fixes, detected by Coverity See the changesets for more" * tag 'for-linus-20141015' of git://git.infradead.org/linux-mtd: (59 commits) mtd: nand: omap: Correct CONFIG_MTD_NAND_OMAP_BCH help message mtd: nand: Force omap_elm to be built as a module if omap2_nand is a module mtd: move support for struct flash_platform_data into m25p80 mtd: spi-nor: add Kconfig option to disable 4K sectors mtd: nand: Move ELM driver and rename as omap_elm nand: omap2: Replace pr_err with dev_err nand: omap2: Remove horrible ifdefs to fix module probe mtd: nand: add Hynix's H27UCG8T2ATR-BC to nand_ids table mtd: nand: support ONFI timing mode retrieval for non-ONFI NANDs mtd: physmap_of: Add non-obsolete map_rom probe mtd: physmap_of: Fix ROM support via OF MAINTAINERS: add l2-mtd.git, 'next' tree for MTD mtd: denali: fix indents and other trivial things mtd: denali: remove unnecessary parentheses mtd: denali: remove another set-but-unused variable mtd: denali: fix include guard and license block of denali.h mtd: nand: don't break long print messages mtd: bcm47xxnflash: replace some magic numbers mtd: bcm47xxnflash: NAND_CMD_RESET support mtd: bcm47xxnflash: add cmd_ctrl handler ...
2014-10-15mtd: sh_flctl: use dmaengine_terminate_all() APIVinod Koul1-1/+1
The drivers should use dmaengine_terminate_all() API instead of accessing the device_control which will be deprecated soon Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-10-15mtd: fsmc_nand: use dmaengine_terminate_all() APIVinod Koul1-1/+1
The drivers should use dmaengine_terminate_all() API instead of accessing the device_control which will be deprecated soon Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-10-06mtd: nand: omap: Correct CONFIG_MTD_NAND_OMAP_BCH help messageRoger Quadros1-1/+1
The MTD_NAND_OMAP_BCH doesn't harm on legacy OMAP platforms so don't state that it should be disabled for them. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-10-06mtd: nand: Force omap_elm to be built as a module if omap2_nand is a moduleEzequiel Garcia2-2/+5
This commit adds a hidden option to build the omap_elm as a module, if omap2_nand is a module (and similarly in the built-in case). This fixes the following build error when omap2_nand is chosen built-in, and omap_elm is chosen as a module: drivers/built-in.o: In function `omap_nand_probe': drivers/mtd/nand/omap2.c:2010: undefined reference to `elm_config' drivers/mtd/nand/omap2.c:1980: undefined reference to `elm_config' drivers/mtd/nand/omap2.c:1927: undefined reference to `elm_config' drivers/built-in.o: In function `omap_elm_correct_data': drivers/mtd/nand/omap2.c:1444: undefined reference to `elm_decode_bch_error_page' Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-10-04block: disable entropy contributions for nonrot devicesMike Snitzer1-0/+1
Clear QUEUE_FLAG_ADD_RANDOM in all block drivers that set QUEUE_FLAG_NONROT. Historically, all block devices have automatically made entropy contributions. But as previously stated in commit e2e1a148 ("block: add sysfs knob for turning off disk entropy contributions"): - On SSD disks, the completion times aren't as random as they are for rotational drives. So it's questionable whether they should contribute to the random pool in the first place. - Calling add_disk_randomness() has a lot of overhead. There are more reliable sources for randomness than non-rotational block devices. From a security perspective it is better to err on the side of caution than to allow entropy contributions from unreliable "random" sources. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-10-03UBI: Fastmap: Calc fastmap size correctlyRichard Weinberger1-1/+2
We need to add fm_sb too. Signed-off-by: Richard Weinberger <richard@nod.at> Reviewed-by: Tanya Brokhman <tlinder@codeaurora.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2014-09-30UBI: Fix trivial typo in __schedule_ubi_workRichard Weinberger1-1/+1
s/of/if/ Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2014-09-28mtd: move support for struct flash_platform_data into m25p80Rafał Miłecki2-29/+21
This "type" seems to be an extra hint for m25p80 about the flash. Some archs register flash_platform_data with "name" set to "m25p80" and then with a real flash name set in "type". It seems to be a trick specific to the m25p80 so let's move it out of spi-nor. Btw switch to the spi_nor_match_id instead of iterating spi_nor_ids. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-09-28mtd: spi-nor: add Kconfig option to disable 4K sectorsRafał Miłecki2-1/+18
Current situation with 4K sectors is quite messy. First of all, some MTD "users" don't work with such small size. An example may be UBIFS which requires 15 KiB erase blocks as a minimum. In theory spi-nor should provide multiple erase regions and MTD "users" should use the one they need. Unforunately that is not implemented. In the result our flashes database in spi-nor is hackish. For some flashes we pretend they don't support 4K sectors just because some distribution uses UBIFS on it. This ofc leads to conflicts, like Samsung using w25q128 with 4K sectors vs. OpenWrt requiring it to pretend it's 64 KiB blocks only. My idea (plan?) for fixing this situation: 1) Use real hw info (this requires a way for disabling 4K for now) 2) Provide detailed info about erase regions 3) Make UBIFS work with devices that support 4K sectors Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-09-26UBI: wl: Rename cancel flag to shutdownRichard Weinberger2-15/+18
It confused me more than once that the cancel flag of the work function does not indicate the cancellation of a single work. In fact it indicates the WL sub-system shutdown and therefore worker functions have to free their wl_entries too. That's why you cannot cancel a single work, you can only shutdown all works. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2014-09-26UBI: ubi_eba_read_leb: Remove in vain variable assignmentRichard Weinberger1-3/+2
There is no need to set err, it will be overwritten in any case later at: if (scrub) err = ubi_wl_scrub_peb(ubi, pnum); Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2014-09-24UBI: Fix livelock in produce_free_peb()Richard Weinberger1-1/+1
The while loop in produce_free_peb() assumes that each work will produce a free PEB. This is not true. If ubi->works_count is 1 and the only scheduled work is the wear_leveling_worker() produce_free_peb() can loop forever in case nobody schedules an erase work. Fix this issue by checking in the while loop whether work is scheduled. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2014-09-22mtd: nand: Move ELM driver and rename as omap_elmEzequiel García3-1/+1
The ELM driver is only used by the OMAP NAND driver, so let's move it to the nand/ directory. Additionally, let's rename it to a less confusing name, so the module is built with a meaningful name, instead of the previous 'elm.ko'. Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-09-22nand: omap2: Replace pr_err with dev_errEzequiel García1-13/+17
Usage of pr_err is frowned upon, so replace it with dev_err. Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-09-22nand: omap2: Remove horrible ifdefs to fix module probeEzequiel García1-59/+71
The current code abuses ifdefs to determine if the selected ECC scheme is supported by the running kernel. As a result the code is hard to read, and it also fails to load as a module. This commit removes all the ifdefs and instead introduces a function omap2_nand_ecc_check() to check if the ECC is supported by using IS_ENABLED(CONFIG_xxx). Since IS_ENABLED() is true when a config is =y or =m, this change fixes the module so it can be loaded with no issues. Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-09-22mtd: nand: add Hynix's H27UCG8T2ATR-BC to nand_ids tableBoris BREZILLON1-0/+4
Add the full description of the Hynix H27UCG8T2ATR-BC NAND chip in the nand_ids table so that we can later use the NAND ECC infos and ONFI timings mode in controller drivers. Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-09-22mtd: nand: support ONFI timing mode retrieval for non-ONFI NANDsBoris BREZILLON1-0/+2
Add an onfi_timing_mode_default field to nand_chip and nand_flash_dev in order to support NAND timings definition for non-ONFI NAND. NAND that support better timings mode than the default one have to define a new entry in the nand_ids table. The default timing mode should be deduced from timings description from the datasheet and the ONFI specification (www.onfi.org/~/media/ONFI/specs/onfi_3_1_spec.pdf, chapter 4.15 "Timing Parameters"). You should choose the closest mode that fit the timings requirements of your NAND chip. Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-09-22mtd: physmap_of: Add non-obsolete map_rom probeAaron Sierra1-0/+4
Previously, the only way to map a NOR device as a simple ROM was to use the obsolete "direct-mapped" compatible binding (which further requires device_type = "nor" and probe-type = "NOR" properties). This patch adds an "mtd-rom" compatible binding to the "map_rom" probe type. Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-09-22mtd: physmap_of: Fix ROM support via OFAaron Sierra1-1/+1
The "ROM" and unknown probe types within the obsolete "direct-mapped" probe function used the nonexistent "mtd_rom" probe instead of the intended "map_rom". Signed-off-by: Aaron Sierra <asierra@xes-inc.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-09-19mtd: denali: fix indents and other trivial thingsMasahiro Yamada1-77/+61
- Fix indents - Do not break a line unless it is longer than 80 columns - Do not insert a whitespace before ';' - Use whitespaces around operators - Use braces for a "else" block where the "if" block uses ones. Besides, eliminate all the warnings reported by checkpatch.pl: - WARNING: quoted string split across lines - WARNING: else is not generally useful after a break or return - WARNING: Missing a blank line after declarations - WARNING: Avoid line continuations in quoted strings Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-09-19mtd: denali: remove unnecessary parenthesesMasahiro Yamada1-7/+7
We should use parentheses only when they are necessary or they really improve the readability. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-09-19mtd: denali: remove another set-but-unused variableBrian Norris1-2/+1
The variable "irq_status" in denali_read_page_raw() is set, but not used. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-09-19UBI: return on error in rename_volumes()Dan Carpenter1-1/+1
I noticed this during a code review. We are checking that the strlen() of ->name is not less than the ->name_len which the user gave us. I believe this bug is harmless but clearly we meant to return here instead of setting an error code and then not using it. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2014-09-19UBI: Improve comment on work_semRichard Weinberger1-1/+2
Make clear what work_sem really does. Suggested-by: Artem Bityutskiy <dedekind1@gmail.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2014-09-17mtd: denali: fix include guard and license block of denali.hMasahiro Yamada1-23/+4
It looks like this header file is a concatenation of two headers. Anyway, the include guard should be renamed and placed at the correct postion and the license block in the middle should be deleted. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-09-17mtd: nand: don't break long print messagesRafał Miłecki2-22/+15
This follows Chapter 2 of Linux's CodingStyle: > However, never break user-visible strings such as printk messages, > because that breaks the ability to grep for them. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-09-17mtd: bcm47xxnflash: replace some magic numbersRafał Miłecki1-4/+6
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-09-17mtd: bcm47xxnflash: NAND_CMD_RESET supportRafał Miłecki1-1/+5
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-09-17mtd: bcm47xxnflash: add cmd_ctrl handlerRafał Miłecki1-0/+21
This won't be used by NAND subsystem as we implement cmdfunc on our own, but will allow us to write a bit cleaner code. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-09-17mtd: bcm47xxnflash: add dev_ready and fill chip_delayRafał Miłecki1-0/+12
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-09-17mtd: bcm47xxnflash: fix typo in freq calculationRafał Miłecki1-3/+5
We are supposed to mask value, not multiply it. Add some comments btw. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-09-17mtd: bcm47xxpart: find NVRAM partitions in middle blocksRafał Miłecki1-0/+11
Old devices used to have NVRAM at the very end of flash and they could be unaligned (starting at some offset in a block). In new devices NVRAM can be located quite randomly, however it seems to always start at the beginning of a block. For example Netgear R6250 has NVRAM located right after the bootloader, before the kernel partition. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-09-17mtd: atmel_nand: remove pmecc_bytes_per_sector, use chip->ecc.bytes insteadWu, Josh1-8/+5
For PMECC, the pmecc_bytes_per_sector has same meaning as ecc.bytes. So remove pmecc_bytes_per_sector and use ecc.bytes instead. Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-09-17mtd: atmel_nand: remove pmecc_sector_number, use ecc.steps insteadWu, Josh1-8/+6
For PMECC, the pmecc_sector_number has same meaning as ecc.steps. So use ecc.steps to replace the pmecc_sector_number. Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-09-17nand: omap2: Add support for flash-based bad block tableEzequiel García1-1/+5
This commit adds a new platform-data boolean property that enables use of a flash-based bad block table. This can also be enabled by setting the 'nand-on-flash-bbt' devicetree property. If the flash BBT is not enabled, the driver falls back to use OOB bad block markers only, as before. If the flash BBT is enabled the kernel will keep track of bad blocks using a BBT, in addition to the OOB markers. As explained by Brian Norris the reasons for using a BBT are: "" The primary reason would be that NAND datasheets specify it these days. A better argument is that nobody guarantees that you can write a bad block marker to a worn out block; you may just get program failures. This has been acknowledged by several developers over the last several years. Additionally, you get a boot-time performance improvement if you only have to read a few pages, instead of a page or two from every block on the flash. "" Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-09-17mtd: nand: atmel_nand: retrieve NFC clockBoris BREZILLON1-0/+25
Retrieve the NFC clock to make sure it is enabled. Make that optional to ensure compatibility with previous device trees but document it as mandatory so newer device trees will include it. Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-09-16UBI: Dispatch update notification if the volume is updatedEzequiel Garcia1-1/+3
The UBI_IOCVOLUP ioctl is used to start an update and also to truncate a volume. In the first case, a "volume updated" notification is dispatched when the update is done. This commit adds the "volume updated" notification to be also sent when the volume is truncated. This is required for UBI block and gluebi to get notified about the new volume size. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: stable@vger.kernel.org # v3.15+
2014-09-16UBI: block: Add support for the UBI_VOLUME_UPDATED notificationEzequiel Garcia1-2/+14
Static volumes can change its 'used_bytes' when they get updated, and so the block interface must listen to the UBI_VOLUME_UPDATED notification to resize the block device accordingly. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: stable@vger.kernel.org # v3.15+
2014-09-16UBI: block: Fix block device size settingEzequiel Garcia1-5/+6
We are currently taking the block device size from the ubi_volume_info.size field. However, this is not the amount of data in the volume, but the number of reserved physical eraseblocks, and hence leads to an incorrect representation of the volume. In particular, this produces I/O errors on static volumes as the block interface may attempt to read unmapped PEBs: $ cat /dev/ubiblock0_0 > /dev/null UBI error: ubiblock_read_to_buf: ubiblock0_0 ubi_read error -22 end_request: I/O error, dev ubiblock0_0, sector 9536 Buffer I/O error on device ubiblock0_0, logical block 2384 [snip] Fix this by using the ubi_volume_info.used_bytes field which is set to the actual number of data bytes for both static and dynamic volumes. While here, improve the error message to be less stupid and more useful: UBI error: ubiblock_read_to_buf: ubiblock0_1 ubi_read error -9 on LEB=0, off=15872, len=512 It's worth noticing that the 512-byte sector representation of the volume is only correct if the volume size is multiple of 512-bytes. This is true for virtually any NAND device, given eraseblocks and pages are 512-byte multiple and hence so is the LEB size. Artem: tweak the error message and make it look more like other UBI error messages. Fixes: 9d54c8a33eec ("UBI: R/O block driver on top of UBI volumes") Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: stable@vger.kernel.org # v3.15+
2014-09-16UBI: block: fix dereference on uninitialized devColin Ian King1-5/+6
commit 4df38926f337 ("UBI: block: Avoid disk size integer overflow") introduced a dereference on dev (which is not initialized at that point) when printing a warning message. Re-order disk_capacity check after the dev is found. Found by cppcheck: [drivers/mtd/ubi/block.c:509]: (error) Uninitialized variable: dev Artem: tweak the error message a bit Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2014-09-16UBI: add missing kmem_cache_free() in process_pool_aeb error pathRichard Genoud1-0/+1
I ran into this error after a ubiupdatevol, because I forgot to backport e9110361a9a4 UBI: fix the volumes tree sorting criteria. UBI error: process_pool_aeb: orphaned volume in fastmap pool UBI error: ubi_scan_fastmap: Attach by fastmap failed, doing a full scan! kmem_cache_destroy ubi_ainf_peb_slab: Slab cache still has objects CPU: 0 PID: 1 Comm: swapper Not tainted 3.14.18-00053-gf05cac8dbf85 #1 [<c000d298>] (unwind_backtrace) from [<c000baa8>] (show_stack+0x10/0x14) [<c000baa8>] (show_stack) from [<c01b7a68>] (destroy_ai+0x230/0x244) [<c01b7a68>] (destroy_ai) from [<c01b8fd4>] (ubi_attach+0x98/0x1ec) [<c01b8fd4>] (ubi_attach) from [<c01ade90>] (ubi_attach_mtd_dev+0x2b8/0x868) [<c01ade90>] (ubi_attach_mtd_dev) from [<c038b510>] (ubi_init+0x1dc/0x2ac) [<c038b510>] (ubi_init) from [<c0008860>] (do_one_initcall+0x94/0x140) [<c0008860>] (do_one_initcall) from [<c037aadc>] (kernel_init_freeable+0xe8/0x1b0) [<c037aadc>] (kernel_init_freeable) from [<c02730ac>] (kernel_init+0x8/0xe4) [<c02730ac>] (kernel_init) from [<c00093f0>] (ret_from_fork+0x14/0x24) UBI: scanning is finished Freeing the cache in the error path fixes the Slab error. Tested on at91sam9g35 (3.14.18+fastmap backports) Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Cc: stable <stable@vger.kernel.org> # 3.10+
2014-09-15mtd: denali: remove a set-but-unused variableMasahiro Yamada1-2/+0
The variable "retry" in wait_for_irq() is set, but not used. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-09-15mtd: denali: change the type of iterators to intMasahiro Yamada1-4/+7
We should rathar use "int" type for loop iterators. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-09-15mtd: denali: remove unnecessary castsMasahiro Yamada1-18/+18
Useless casts result in unreadable source code. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-09-15mtd: denali: remove unnecessary variable initializationsMasahiro Yamada1-32/+27
All of these variables are initialized to zero and then set to a different value below. Zero-initializing is redundant. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-09-15mtd: denali: fix the format of comment blocksMasahiro Yamada1-123/+188
We should use /* * Blah Blah ... * ... */ for multi-line comment blocks. In addition, refactor some comments where it seems reasonable and remove some comments where the code is clear enough such as: /* clear interrupts */ clear_interrupts(denali); Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-09-15Merge tag 'v3.17-rc5' from upstreamBrian Norris1-4/+12
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-17 22:12:44 +0000