summaryrefslogtreecommitdiff
path: root/drivers/mmc
AgeCommit message (Collapse)AuthorFilesLines
2022-03-28Merge tag 'tty-5.18-rc1' of ↵Linus Torvalds1-15/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here are the big set of tty and serial driver changes for 5.18-rc1. Nothing major, some more good cleanups from Jiri and 2 new serial drivers. Highlights include: - termbits cleanups - export symbol cleanups and other core cleanups from Jiri Slaby - new sunplus and mvebu uart drivers (amazing that people are still creating new uarts...) - samsung serial driver cleanups - ldisc 29 is now "reserved" for experimental/development line disciplines - lots of other tiny fixes and cleanups to serial drivers and bindings All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (104 commits) vt_ioctl: fix potential spectre v1 in VT_DISALLOCATE serial: 8250: fix XOFF/XON sending when DMA is used tty: serial: samsung: Add ARTPEC-8 support dt-bindings: serial: samsung: Add ARTPEC-8 UART serial: sc16is7xx: Clear RS485 bits in the shutdown tty: serial: samsung: simplify getting OF match data tty: serial: samsung: constify variables and pointers tty: serial: samsung: constify s3c24xx_serial_drv_data members tty: serial: samsung: constify UART name tty: serial: samsung: constify s3c24xx_serial_drv_data tty: serial: samsung: reduce number of casts tty: serial: samsung: embed s3c2410_uartcfg in parent structure tty: serial: samsung: embed s3c24xx_uart_info in parent structure serial: 8250_tegra: mark acpi_device_id as unused with !ACPI tty: serial: bcm63xx: use more precise Kconfig symbol serial: SERIAL_SUNPLUS should depend on ARCH_SUNPLUS tty: serial: jsm: fix two assignments in if conditions tty: serial: jsm: remove redundant assignments to variable linestatus serial: 8250_mtk: make two read-only arrays static const serial: samsung_tty: do not unlock port->lock for uart_write_wakeup() ...
2022-03-28Merge tag 'staging-5.18-rc1' of ↵Linus Torvalds1-0/+5
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver updates from Greg KH: "Here is the big set of staging driver updates for 5.18-rc1. Loads of tiny cleanups for almost all staging drivers in here, nothing major at all. Highlights include: - remove the ashmem Android driver. It is long-dead and if there are any legacy userspace applications still using it, the Android kernel images will maintain it, the community shouldn't care about it anymore - wfx wifi driver major cleanups. Should be ready to merge out of staging soon, and will coordinate with the wifi maintainers after -rc1 is out - major cleanups and unwinding of the layers of the r8188eu driver. It's amazing just how many unneeded layers of abstraction is in there, just when we think it's done, another is found... - lots of tiny coding style cleanups in many other staging drivers. All have been in linux-next for a while with no reported problems" * tag 'staging-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (455 commits) staging: r8188eu: remove unnecessary memset in r8188eu staging: greybus: introduce pwm_ops::apply staging: rts5208: Resolve checkpatch.pl issues. staging: sm750fb: fix naming style staging: fbtft: Consider type of init sequence values in fbtft_init_display() staging: fbtft: Constify buf parameter in fbtft_dbg_hex() staging: mmal-vchiq: clear redundant item named bulk_scratch mips: dts: ralink: add MT7621 SoC staging: r8188eu: remove some unused local ieee80211 macros staging: r8188eu: make rtl8188e_process_phy_info static staging: r8188eu: remove unused function prototype staging: r8188eu: remove three unused receive defines staging: r8188eu: remove unnecessary initializations staging: rtl8192e: Fix spelling mistake "RESQUEST" -> "REQUEST" MAINTAINERS: remove the obsolete file entry for staging in ANDROID DRIVERS staging: r8188eu: proper error handling in rtw_init_drv_sw staging: r8188eu: call _cancel_timer_ex from _rtw_free_recv_priv staging: vt6656: Removed unused variable vt3342_vnt_threshold staging: vt6656: Removed unused variable bb_vga_0 staging: remove ashmem ...
2022-03-28Merge tag 'char-misc-5.18-rc1' of ↵Linus Torvalds1-11/+9
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver updates from Greg KH: "Here is the big set of char/misc and other small driver subsystem updates for 5.18-rc1. Included in here are merges from driver subsystems which contain: - iio driver updates and new drivers - fsi driver updates - fpga driver updates - habanalabs driver updates and support for new hardware - soundwire driver updates and new drivers - phy driver updates and new drivers - coresight driver updates - icc driver updates Individual changes include: - mei driver updates - interconnect driver updates - new PECI driver subsystem added - vmci driver updates - lots of tiny misc/char driver updates All of these have been in linux-next for a while with no reported problems" * tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (556 commits) firmware: google: Properly state IOMEM dependency kgdbts: fix return value of __setup handler firmware: sysfb: fix platform-device leak in error path firmware: stratix10-svc: add missing callback parameter on RSU arm64: dts: qcom: add non-secure domain property to fastrpc nodes misc: fastrpc: Add dma handle implementation misc: fastrpc: Add fdlist implementation misc: fastrpc: Add helper function to get list and page misc: fastrpc: Add support to secure memory map dt-bindings: misc: add fastrpc domain vmid property misc: fastrpc: check before loading process to the DSP misc: fastrpc: add secure domain support dt-bindings: misc: add property to support non-secure DSP misc: fastrpc: Add support to get DSP capabilities misc: fastrpc: add support for FASTRPC_IOCTL_MEM_MAP/UNMAP misc: fastrpc: separate fastrpc device from channel context dt-bindings: nvmem: brcm,nvram: add basic NVMEM cells dt-bindings: nvmem: make "reg" property optional nvmem: brcm_nvram: parse NVRAM content into NVMEM cells nvmem: dt-bindings: Fix the error of dt-bindings check ...
2022-03-23Merge tag 'mmc-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds26-120/+972
Pull MMC updates from Ulf Hansson: "MMC core: - Convert to sysfs_emit() in favor of sprintf() - Improve fallback to speed modes if eMMC HS200 fails MMC host: - dw_mmc: Allow variants to set minimal supported clock rate - dw-mmc-rockchip: Fix problems with invalid clock rates - litex_mmc: Add new DT based driver for the LiteX's LiteSDCard interface - litex_mmc: Add Gabriel Somlo and Joel Stanley as co-maintainers for LiteX - mtk-sd: Add support for the Mediatek MT8186 variant - renesas_sdhi: Add support for RZ/G2UL variant - renesas_sdhi: Add support for RZ/V2L variant - rtsx_pci: Adjust power-on sequence to conform to the SD spec - sdhci-am654: Add support for TI's AM62 variant - sdhci_am654: Fixup support for TI's AM64 variant - sdhci-esdhc-imx: Add support for the imx93 variant - sdhci-msm: Add support for the msm8953 variant - sdhci-pci-gli: Add support for runtime PM for the GL9763E variant - sdhci-pci-gli: Adjustments of the SSC function for the GL975x variants - sdhci-tegra: Add support for wake on SD card event - sunxi-mmc: Add support for Allwinner's F1c100s variant - sunxi-mmc: Add support for D1 MMC variant" * tag 'mmc-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (37 commits) dt-bindings: mmc: renesas,sdhi: Document RZ/G2UL SoC mmc: tmio: remove outdated members from host struct mmc: mtk-sd: Silence delay phase calculation debug log mmc: davinci_mmc: Handle error for clk_enable mmc: sdhci-pci-gli: Add runtime PM for GL9763E mmc: core: Drop HS400 caps unless 8-bit bus is supported too mmc: host: Return an error when ->enable_sdio_irq() ops is missing mmc: core: Improve fallback to speed modes if eMMC HS200 fails dt-bindings: mmc: sunxi: add Allwinner F1c100s compatible mmc: dw-mmc-rockchip: Fix handling invalid clock rates mmc: dw_mmc: Support setting f_min from host drivers mmc: host: Drop commas after SoC match table sentinels mmc: rtsx: add 74 Clocks in power on flow dt-bindings: mmc: renesas,sdhi: Document RZ/V2L SoC mmc: sh_mmcif: Simplify division/shift logic mmc: sdhci_am654: Add Support for TI's AM62 SoC dt-bindings: mmc: imx-esdhc: Add imx93 compatible string dt-bindings: mmc: sdhci-am654: Add compatible string for AM62 SoC mmc: sdhci_am654: Fix the driver data of AM64 SoC mmc: core: use sysfs_emit() instead of sprintf() ...
2022-03-21Merge tag 'spi-v5.18' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "The overwhelming bulk of this pull request is a change from Uwe Kleine-König which changes the return type of the remove() function to void as part of some wider work he's doing to do this for all bus types, causing updates to most SPI device drivers. The branch with that on has been cross merged with a couple of other trees which added new SPI drivers this cycle, I'm not expecting any build issues resulting from the change. Otherwise it's been a relatively quiet release with some new device support, a few minor features and the welcome completion of the conversion of the subsystem to use GPIO descriptors rather than numbers: - Change return type of remove() to void. - Completion of the conversion of SPI controller drivers to use GPIO descriptors rather than numbers. - Quite a few DT schema conversions. - Support for multiple SPI devices on a bus in ACPI systems. - Big overhaul of the PXA2xx SPI driver. - Support for AMD AMDI0062, Intel Raptor Lake, Mediatek MT7986 and MT8186, nVidia Tegra210 and Tegra234, Renesas RZ/V2L, Tesla FSD and Sunplus SP7021" [ And this is obviously where that spi change that snuck into the regulator tree _should_ have been :^] * tag 'spi-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (124 commits) spi: fsi: Implement a timeout for polling status spi: Fix erroneous sgs value with min_t() spi: tegra20: Use of_device_get_match_data() spi: mediatek: add ipm design support for MT7986 spi: Add compatible for MT7986 spi: sun4i: fix typos in comments spi: mediatek: support tick_delay without enhance_timing spi: Update clock-names property for arm pl022 spi: rockchip-sfc: fix platform_get_irq.cocci warning spi: s3c64xx: Add spi port configuration for Tesla FSD SoC spi: dt-bindings: samsung: Add fsd spi compatible spi: topcliff-pch: Prevent usage of potentially stale DMA device spi: tegra210-quad: combined sequence mode spi: tegra210-quad: add acpi support spi: npcm-fiu: Fix typo ("npxm") spi: Fix Tegra QSPI example spi: qup: replace spin_lock_irqsave by spin_lock in hard IRQ spi: cadence: fix platform_get_irq.cocci warning spi: Update NXP Flexspi maintainer details dt-bindings: mfd: maxim,max77802: Convert to dtschema ...
2022-03-15mmc: tmio: remove outdated members from host structWolfram Sang1-4/+0
The wrappers are gone for two years now but they have still pointers reserved in the tmio_mmc_host struct. Remove them. Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Fixes: f22084b662e5 ("mmc: tmio: remove superfluous callback wrappers") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20220311140542.5407-1-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-03-15mmc: mtk-sd: Silence delay phase calculation debug logAlexandre Bailon1-2/+2
The driver prints the following log everytime data is written to RPMB: mtk-msdc 11230000.mmc: phase: [map:ffffffff] [maxlen:32] [final:10] dev_info is used to print that log but it seems that log is only useful for debbuging. Use dev_dbg instead of dev_info. Signed-off-by: Alexandre Bailon <abailon@baylibre.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20220311103320.3072171-1-abailon@baylibre.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-03-15mmc: davinci_mmc: Handle error for clk_enableJiasheng Jiang1-1/+5
As the potential failure of the clk_enable(), it should be better to check it and return error if fails. Fixes: bbce5802afc5 ("davinci: mmc: updates to suspend/resume implementation") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Link: https://lore.kernel.org/r/20220308071415.1093393-1-jiasheng@iscas.ac.cn Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-03-15mmc: sdhci-pci-gli: Add runtime PM for GL9763EBen Chuang1-0/+47
Add runtime PM for GL9763E and disable PLL in runtime suspend. So power gated of upstream port can be enabled. GL9763E has an auxiliary power so it keep states in runtime suspend. In runtime resume, PLL is enabled and waits for it to stabilize. Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw> Tested-by: Kevin Chang <kevin.chang@lcfuturecenter.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20220307090009.1386876-1-benchuanggli@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-03-15mmc: core: Drop HS400 caps unless 8-bit bus is supported tooUlf Hansson2-7/+11
When mmc_select_hs400es() tries to switch to the HS400 ES mode, it may bail out early if the host doesn't support an 8-bit buswidth, as it's required for the HS400 mode. To improve the situation, let's instead drop the HS400 bits from the capability field if the 8-bit bus isn't supported. In this way, we allow the mmc initialization to continue by trying a lower speed mode. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20220303165151.129806-1-ulf.hansson@linaro.org
2022-03-15mmc: host: Return an error when ->enable_sdio_irq() ops is missingUlf Hansson1-2/+13
Even if the current WARN() notifies the user that something is severely wrong, we can still end up in a PANIC() when trying to invoke the missing ->enable_sdio_irq() ops. Therefore, let's also return an error code and prevent the host from being added. While at it, move the code into a separate function to prepare for subsequent changes and for further host caps validations. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20220303165142.129745-1-ulf.hansson@linaro.org
2022-03-15mmc: core: Improve fallback to speed modes if eMMC HS200 failsUlf Hansson1-3/+13
In the error path of mmc_select_hs200() we are trying our best to restore the card/host into a valid state. This makes sense, especially if we encounter a simple switch error (-EBADMSG). However, rather than then continue with using the legacy speed mode, let's try the other better speed modes first. Additionally, let's update the card->mmc_avail_type to avoid us from trying a broken HS200 mode again. In an Amlogic S905W based TV box where the switch to HS200 mode fails for the eMMC, this allows us to use the eMMC in DDR mode in favor of the legacy mode, which greatly improves the performance. Suggested-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/20220303164522.129583-1-ulf.hansson@linaro.org
2022-03-14Merge 5.17-rc8 into staging-nextGreg Kroah-Hartman6-15/+22
We need the staging fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-07mmc: dw-mmc-rockchip: Fix handling invalid clock ratesPeter Geis1-4/+23
The Rockchip rk356x ciu clock cannot be set as low as the dw-mmc hardware supports. This leads to a situation during card initialization where the clock is set lower than the clock driver can support. The dw-mmc-rockchip driver spews errors when this happens. For normal operation this only happens a few times during boot, but when cd-broken is enabled (in cases such as the SoQuartz module) this fires multiple times each poll cycle. Fix this by testing the lowest possible frequency that the clock driver can support which is within the mmc specification. Divide that rate by the internal divider and set f_min to this. Signed-off-by: Peter Geis <pgwipeout@gmail.com> Link: https://lore.kernel.org/r/20220305215835.2210388-3-pgwipeout@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-03-07mmc: dw_mmc: Support setting f_min from host driversPeter Geis2-1/+8
Host drivers may not be able to support frequencies as low as dw-mmc supports. Unfortunately f_min isn't available when the drv_data->init function is called, as the mmc_host struct hasn't been set up yet. Support the host drivers saving the requested minimum frequency, so we can later set f_min when it is available. Signed-off-by: Peter Geis <pgwipeout@gmail.com> Link: https://lore.kernel.org/r/20220305215835.2210388-2-pgwipeout@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-03-07mmc: host: Drop commas after SoC match table sentinelsGeert Uytterhoeven2-6/+6
It does not make sense to have a comma after a sentinel, as any new elements must be added before the sentinel. Add comments to clarify the purpose of the empty elements. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/9050fa278eaaa9e6ec719a3b158a2fad285560d0.1646311673.git.geert+renesas@glider.be Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-03-07Merge branch 'fixes' into nextUlf Hansson5-8/+14
2022-03-07mmc: core: Restore (almost) the busy polling for MMC_SEND_OP_CONDUlf Hansson5-8/+14
Commit 76bfc7ccc2fa ("mmc: core: adjust polling interval for CMD1"), significantly decreased the polling period from ~10-12ms into just a couple of us. The purpose was to decrease the total time spent in the busy polling loop, but unfortunate it has lead to problems, that causes eMMC cards to never gets out busy and thus fails to be initialized. To fix the problem, but also to try to keep some of the new improved behaviour, let's start by using a polling period of 1-2ms, which then increases for each loop, according to common polling loop in __mmc_poll_for_busy(). Reported-by: Jean Rene Dawin <jdawin@math.uni-bielefeld.de> Reported-by: H. Nikolaus Schaller <hns@goldelico.com> Cc: Huijin Park <huijin.park@samsung.com> Fixes: 76bfc7ccc2fa ("mmc: core: adjust polling interval for CMD1") Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Jean Rene Dawin <jdawin@math.uni-bielefeld.de> Tested-by: H. Nikolaus Schaller <hns@goldelico.com> Link: https://lore.kernel.org/r/20220304105656.149281-1-ulf.hansson@linaro.org
2022-03-02mmc: rtsx: add 74 Clocks in power on flowRicky WU1-10/+19
SD spec definition: "Host provides at least 74 Clocks before issuing first command" After 1ms for the voltage stable then start issuing the Clock signals if POWER STATE is MMC_POWER_OFF to MMC_POWER_UP to issue Clock signal to card MMC_POWER_UP to MMC_POWER_ON to stop issuing signal to card Signed-off-by: Ricky Wu <ricky_wu@realtek.com> Link: https://lore.kernel.org/r/1badf10aba764191a1a752edcbf90389@realtek.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-03-01mmc: rtsx: Fix build errors/warnings for unused variableUlf Hansson1-6/+0
The struct device *dev, is no longer needed at various functions, let's therefore drop it to fix the build errors/warnings. Fixes: 7570fb41e450 ("mmc: rtsx: Let MMC core handle runtime PM") Cc: Kai-Heng Feng <kai.heng.feng@canonical.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20220301115300.64332-1-ulf.hansson@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-28sdio_uart: make use of UART_LCR_WLEN() + tty_get_char_size()Jiri Slaby1-15/+2
Having a generic UART_LCR_WLEN() macro and the tty_get_char_size() helper, we can remove all those repeated switch-cases in drivers. Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: linux-mmc@vger.kernel.org Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220224095558.30929-4-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-28Merge branch 'fixes' into nextUlf Hansson1-7/+8
2022-02-28mmc: sh_mmcif: Simplify division/shift logicGeert Uytterhoeven1-4/+3
"a / (1 << b)" == "a >> b". No change in generated code. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/68d689c39c769d298b53ee8cb9de0e594a2999b2.1645460780.git.geert+renesas@glider.be Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-02-28mmc: sdhci_am654: Add Support for TI's AM62 SoCAswath Govindraju1-0/+4
Add support for the controller present on the AM62x SoC. There are instances: sdhci0: 8bit bus width, max 200 MBps sdhci1: 4bit bus width, max 100 MBps sdhci2: 4bit bus width, max 100 MBps The PHY used for 8 bit instance is same as the PHY for the 4 bit instance. Therefore, introduce a new bus width independent compatible for AM62 SoC that uses the driver data required for 4 bit instance. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20220218072840.5629-1-a-govindraju@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-02-28mmc: meson: Fix usage of meson_mmc_post_req()Rong Chen1-7/+8
Currently meson_mmc_post_req() is called in meson_mmc_request() right after meson_mmc_start_cmd(). This could lead to DMA unmapping before the request is actually finished. To fix, don't call meson_mmc_post_req() until meson_mmc_request_done(). Signed-off-by: Rong Chen <rong.chen@amlogic.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Fixes: 79ed05e329c3 ("mmc: meson-gx: add support for descriptor chain mode") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220216124239.4007667-1-rong.chen@amlogic.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-02-28mmc: sdhci_am654: Fix the driver data of AM64 SoCAswath Govindraju1-22/+2
The MMCSD IPs used in AM64 are the same as the ones used in J721E. Therefore, fix this by using the driver data from J721E for AM64 too, for both 8 and 4 bit instances. Fixes: 754b7f2f7d2a ("mmc: sdhci_am654: Add Support for TI's AM64 SoC") Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Link: https://lore.kernel.org/r/20220211075056.26179-1-a-govindraju@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-02-28mmc: core: use sysfs_emit() instead of sprintf()Sergey Shtylyov6-31/+34
sprintf() (still used in the MMC core for the sysfs output) is vulnerable to the buffer overflow. Use the new-fangled sysfs_emit() instead. Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool. Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/717729b2-d65b-c72e-9fac-471d28d00b5a@omp.ru Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-02-28mmc: sunxi-mmc: Add D1 MMC variantSamuel Holland1-0/+9
D1's MMC controllers are unique in that they have the DMA address shift (like A100) with a 13-bit descriptor size field (like sun4i). Add the compatible and parameters for this new variant. Signed-off-by: Samuel Holland <samuel@sholland.org> Acked-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220203015112.12008-2-samuel@sholland.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-02-28mmc: dw_mmc: Use device_property_string_array_count()Andy Shevchenko1-2/+1
Use device_property_string_array_count() to get number of strings in a string array property. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220202182450.54925-1-andriy.shevchenko@linux.intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-02-28mmc: davinci: Use of_device_get_match_data() helperBean Huo1-4/+2
Only the device data is needed, not the entire struct of_device_id. Use of_device_get_match_data() instead of of_match_device(). Signed-off-by: Bean Huo <beanhuo@micron.com> Link: https://lore.kernel.org/r/20220202180648.1252154-6-huobean@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-02-28mmc: sdhci-of-at91: Use of_device_get_match_data() helperBean Huo1-4/+2
Only the device data is needed, not the entire struct of_device_id. Use of_device_get_match_data() instead of open coding of_match_device(). Signed-off-by: Bean Huo <beanhuo@micron.com> Link: https://lore.kernel.org/r/20220202180648.1252154-5-huobean@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-02-28mmc: sdhci-tegra: Use of_device_get_match_data() helperBean Huo1-4/+2
Only the device data is needed,not the whole struct of_device_id. Use of_device_get_match_data() instead of open coding of of_match_device(). Signed-off-by: Bean Huo <beanhuo@micron.com> Link: https://lore.kernel.org/r/20220202180648.1252154-3-huobean@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-02-28mmc: wmt-sdmmc: Use of_device_get_match_data() helperBean Huo1-5/+2
Only the device data is needed, not the whole struct of_device_id. Use of_device_get_match_data() instead of open coding of of_match_device(). Signed-off-by: Bean Huo <beanhuo@micron.com> Link: https://lore.kernel.org/r/20220202180648.1252154-2-huobean@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-02-28mmc: sdhci-pci-gli: Add a switch to enable/disable SSC for GL9750 and GL9755Ben Chuang1-12/+54
Add a vendor-specific bit at the bit26 of GL9750's register 878h and GL9755's register 78h to decide whether to disable SSC function. If this bit is set, the SSC function will be disabled. Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw> Link: https://lore.kernel.org/r/20220119075406.36321-1-benchuanggli@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-02-28mmc: sdhci-pci-gli: Enable SSC at 50MHz and 100MHz for GL9750 and GL9755Ben Chuang1-0/+36
Enable SSC function at 50MHz and 100MHz for GL9750 and GL9755. Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw> Link: https://lore.kernel.org/r/20220119075339.36281-1-benchuanggli@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-02-28mmc: sdhci-pci-gli: Reduce the SSC value at 205MHz for GL9750 and GL9755Ben Chuang1-2/+2
The SSC value is 0xFFE7 at 205MHz and may be saturated. Reduce the SSC value to 0x5A1D at 205MHz to reduce this situation for GL9750 and GL9755. Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw> Link: https://lore.kernel.org/r/20220119075306.36262-1-benchuanggli@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-02-28mmc: Add driver for LiteX's LiteSDCard interfaceGabriel Somlo3-0/+675
LiteX (https://github.com/enjoy-digital/litex) is a SoC framework that targets FPGAs. LiteSDCard is a small footprint, configurable SDCard core commonly used in LiteX designs. The driver was first written in May 2020 and has been maintained cooperatively by the LiteX community. Thanks to all contributors! Co-developed-by: Kamil Rakoczy <krakoczy@antmicro.com> Signed-off-by: Kamil Rakoczy <krakoczy@antmicro.com> Co-developed-by: Maciej Dudek <mdudek@internships.antmicro.com> Signed-off-by: Maciej Dudek <mdudek@internships.antmicro.com> Co-developed-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Signed-off-by: Gabriel Somlo <gsomlo@gmail.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220113170300.3555651-4-gsomlo@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-02-28mmc: sdhci-tegra: Enable wake on SD card eventAniruddha Rao1-1/+8
Enable GPIO wake source on SD card detect line. Physical card insertion/removal event should wake the system from suspend. Signed-off-by: Aniruddha Rao <anrao@nvidia.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/1642050969-21152-1-git-send-email-anrao@nvidia.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-02-28mmc: dw_mmc: Fix potential null pointer riskWen Zhiwei1-1/+1
we previously assumed 'host->slot' could be null, null pointer judgment should be added Signed-off-by: Wen Zhiwei <wenzhiwei@kylinos.cn> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Link: https://lore.kernel.org/r/20211229023814.53372-1-wenzhiwei@kylinos.cn Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-02-28Merge 5.17-rc6 into staging-nextGreg Kroah-Hartman1-14/+14
We need the staging fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-28Merge 5.17-rc6 into char-misc-nextGreg Kroah-Hartman1-14/+14
We need the char-misc fixes in here. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-22mmc: rtsx: Let MMC core handle runtime PMKai-Heng Feng1-18/+0
Since MMC core handles runtime PM reference counting, we can avoid doing redundant runtime PM work in the driver. That means the only thing commit 5b4258f6721f ("misc: rtsx: rts5249 support runtime PM") misses is to always enable runtime PM, to let its parent driver enable ASPM in the runtime idle routine. Fixes: 7499b529d97f ("mmc: rtsx: Use pm_runtime_{get,put}() to handle runtime PM") Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20220216055435.2335297-1-kai.heng.feng@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-17staging: wfx: apply the necessary SDIO quirks for the Silabs WF200Jérôme Pouiller1-0/+5
Until now, the SDIO quirks are applied directly from the driver. However, it is better to apply the quirks before driver probing. So, this patch relocate the quirks in the MMC framework. Note that the WF200 has no valid SDIO VID/PID. Therefore, we match DT rather than on the SDIO VID/PID. Reviewed-by: Pali Rohár <pali@kernel.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20220216093112.92469-3-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-14Merge 5.17-rc4 into char-misc-nextGreg Kroah-Hartman4-4/+17
We need the char/misc fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-09spi: make remove callback a void functionUwe Kleine-König1-2/+1
The value returned by an spi driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Claudius Heine <ch@denx.de> Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC Acked-by: Marcus Folkesson <marcus.folkesson@gmail.com> Acked-by: Łukasz Stelmach <l.stelmach@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220123175201.34839-6-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
2022-02-08mmc: block: fix read single on recovery logicChristian Löhle1-14/+14
On reads with MMC_READ_MULTIPLE_BLOCK that fail, the recovery handler will use MMC_READ_SINGLE_BLOCK for each of the blocks, up to MMC_READ_SINGLE_RETRIES times each. The logic for this is fixed to never report unsuccessful reads as success to the block layer. On command error with retries remaining, blk_update_request was called with whatever value error was set last to. In case it was last set to BLK_STS_OK (default), the read will be reported as success, even though there was no data read from the device. This could happen on a CRC mismatch for the response, a card rejecting the command (e.g. again due to a CRC mismatch). In case it was last set to BLK_STS_IOERR, the error is reported correctly, but no retries will be attempted. Fixes: 81196976ed946c ("mmc: block: Add blk-mq support") Cc: stable@vger.kernel.org Signed-off-by: Christian Loehle <cloehle@hyperstone.com> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/bc706a6ab08c4fe2834ba0c05a804672@hyperstone.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-01-31moxart: fix potential use-after-free on remove pathGreg Kroah-Hartman1-1/+1
It was reported that the mmc host structure could be accessed after it was freed in moxart_remove(), so fix this by saving the base register of the device and using it instead of the pointer dereference. Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Xiyu Yang <xiyuyang19@fudan.edu.cn> Cc: Xin Xiong <xiongx18@fudan.edu.cn> Cc: Xin Tan <tanxin.ctf@gmail.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Yang Li <yang.lee@linux.alibaba.com> Cc: linux-mmc@vger.kernel.org Cc: stable <stable@vger.kernel.org> Reported-by: whitehat002 <hackyzh002@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20220127071638.4057899-1-gregkh@linuxfoundation.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-01-26mmc: rtsx: Use pm_runtime_{get,put}() to handle runtime PMKai-Heng Feng1-11/+33
Commit 5b4258f6721f ("misc: rtsx: rts5249 support runtime PM") doesn't use pm_runtime_{get,put}() helpers when it should, so the RPM refcount keeps at zero, hence its parent driver, rtsx_pci, has to do lots of weird tricks to keep it from runtime suspending. So use those helpers at right places to properly manage runtime PM. Fixes: 5b4258f6721f ("misc: rtsx: rts5249 support runtime PM") Cc: Ricky WU <ricky_wu@realtek.com> Tested-by: Ricky WU <ricky_wu@realtek.com> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20220125055010.1866563-1-kai.heng.feng@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-24mmc: core: Wait for command setting 'Power Off Notification' bit to completeAndrey Skvortsov1-1/+7
SD card is allowed to signal busy on DAT0 up to 1s after the CMD49. According to SD spec (version 6.0 section 5.8.1.3) first host waits until busy of CMD49 is released and only then polls Power Management Status register up to 1s until the card indicates ready to power off. Without waiting for busy before polling status register sometimes card becomes unresponsive and system fails to suspend: [ 205.907459] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 206.421274] sunxi-mmc 1c0f000.mmc: data error, sending stop command [ 206.421321] sunxi-mmc 1c0f000.mmc: send stop command failed [ 206.421347] mmc0: error -110 reading status reg of PM func [ 206.421366] PM: dpm_run_callback(): mmc_bus_suspend+0x0/0x74 returns -110 [ 206.421402] mmcblk mmc0:aaaa: PM: failed to suspend async: error -110 [ 206.437064] PM: Some devices failed to suspend, or early wake event detected Tested with Sandisk Extreme PRO A2 64GB on Allwinner A64 system. Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com> Fixes: 2c5d42769038 ("mmc: core: Add support for Power Off Notification for SD cards") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220115121447.641524-1-andrej.skvortzov@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-01-24mmc: sh_mmcif: Check for null res pointerJiasheng Jiang1-0/+3
If there is no suitable resource, platform_get_resource() will return NULL. Therefore in order to avoid the dereference of the NULL pointer, it should be better to check the 'res'. Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Cc: stable@vger.kernel.org # v5.16+ Link: https://lore.kernel.org/r/20220119120006.1426964-1-jiasheng@iscas.ac.cn Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-12 04:45:36 +0000