summaryrefslogtreecommitdiff
path: root/drivers/mmc
AgeCommit message (Collapse)AuthorFilesLines
2007-09-11bug in AT91 MCI suspend routinesAnti Sullin1-3/+3
This patch fixes a bug in AT91 mmc host driver, that enables the wakeup from suspend on card detection pin even if the card detect pin is not available (==0). If not card detection pin is defined, IRQ0 == FIQ gets enabled and if some activity is present on that pin, the system gets a FIQ request, that causes a crash. Signed-off-by: Anti Sullin <anti.sullin@artecdesign.ee> Signed-off-by: Nicolas Ferre <nicolas.ferre@rfo.atmel.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-08-23sdhci: tell which spurious interrupt we gotPierre Ossman1-6/+6
When we get unexpected interrupts, also print which interrupt it was. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-08-23sdhci: handle data interrupts during commandPierre Ossman2-7/+22
It is fully legal for a controller to start issuing data related interrupts before it has signalled that the command has completed. Make sure the driver actually can handle this. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-08-23mmc: ignore bad max block size in sdhciDavid Vrabel1-5/+4
Some SDHC cards report an invalid maximum block size, in these cases assume they support block sizes up to 512 bytes instead of returning an error. Signed-off-by: David Vrabel <david.vrabel@csr.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-08-23sdhci: be more cautious about block count registerPierre Ossman1-2/+2
The block count register shouldn't be trusted for single block transfers, so avoid using it completely when calculating transferred bytes. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-08-23drivers/mmc/core/host.c: kmalloc + memset conversion to kzallocMariusz Kozlowski1-3/+1
drivers/mmc/core/host.c | 3509 -> 3457 (-52 bytes) drivers/mmc/core/host.o | 92400 -> 92136 (-264 bytes) Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-08-23drivers/mmc/core/bus.c: kmalloc + memset conversion to kzallocMariusz Kozlowski1-3/+1
drivers/mmc/core/bus.c | 5663 -> 5619 (-44 bytes) drivers/mmc/core/bus.o | 70899 -> 70731 (-168 bytes) Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-08-09mmc: at91_mci: remove whitespace at the end of linesNicolas Ferre1-4/+4
Some cleanup with whitespace/tab at the end of lines. Signed-off-by: Nicolas Ferre <nicolas.ferre@rfo.atmel.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-08-09mmc: reorganize bounce buffer initPierre Ossman1-7/+7
Reorganize the code that initializes mmc_block's bounce buffer in order to avoid warnings when MMC_BLOCK_BOUNCE isn't used. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-08-09wbsd: fix section mismatch warningsGabriel C1-5/+5
This patch fixes the following section mismatch warnings ... WARNING: vmlinux.o(.init.text+0x29d40): Section mismatch: reference to .exit.text:wbsd_release_resources (between 'wbsd_init' and 'wbsd_probe') WARNING: vmlinux.o(.init.text+0x29d49): Section mismatch: reference to .exit.text:wbsd_free_mmc (between 'wbsd_init' and 'wbsd_probe') WARNING: vmlinux.o(.init.text+0x29f28): Section mismatch: reference to .exit.text:wbsd_free_mmc (between 'wbsd_init' and 'wbsd_probe') ... Signed-off-by: Gabriel Craciunescu <nix.or.die@googlemail.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-26Merge branch 'for-linus' of ↵Linus Torvalds22-175/+250
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: drivers/mmc/core/: make 3 functions static mmc: add missing printk levels mmc: remove redundant debug information from sdhci and wbsd mmc: proper debugging output in core mmc: be more verbose about card insertions/removal mmc: Don't hold lock when releasing an added card mmc: add a might_sleep() to mmc_claim_host() mmc: update kerneldoc mmc: update header file paths sdhci: add support to ENE-CB714 mmc: check error bits before command completion
2007-07-26drivers/mmc/core/: make 3 functions staticAdrian Bunk4-75/+69
This patch makes the following needlessly global functions static: - sd_ops.c: mmc_app_cmd() - core.c: __mmc_release_bus() - core.c: mmc_start_request() Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-26mmc: add missing printk levelsPierre Ossman2-10/+8
Some printk:s were missing an explicit level. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-26mmc: remove redundant debug information from sdhci and wbsdPierre Ossman2-26/+0
Remove the extra debugging output that now is properly printed by the core. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-26mmc: proper debugging output in corePierre Ossman1-8/+40
Make sure that the debugging output in the core is complete. This should allow us to clean up all the extra debug output that each and every other host driver seems to contain. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-26mmc: be more verbose about card insertions/removalPierre Ossman3-2/+35
Let the user know that the kernel actually detected the card by printing some basic information in dmesg. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-26mmc: Don't hold lock when releasing an added cardPierre Ossman2-10/+16
When the card has been added to the device model, it might be bound to a card driver. Therefore, we have to release the host lock when trying to remove it as we otherwise might deadlock with the driver. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-26mmc: add a might_sleep() to mmc_claim_host()Pierre Ossman1-0/+2
In the normal case, the host lock can be claimed directly. When it cannot, the caller will sleep. Make sure we don't have any latent bugs by always calling might_sleep(). Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-26mmc: update kerneldocPierre Ossman3-14/+26
Make sure the kerneldoc comments are up to date and relevant. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-26mmc: update header file pathsPierre Ossman18-18/+18
Make sure all headers in the files reflect their true position in the tree. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-26sdhci: add support to ENE-CB714Leandro Dorileo1-0/+27
Added its pci_id and implemented a quirk for it because this controller needs to reset cmd and data when setting ios. Signed-off-by: Leandro Dorileo <dorileo@ossystems.com.br> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-26mmc: check error bits before command completionPierre Ossman1-13/+10
Some controllers signal "command complete" even on failures (which they are allowed to do according to the spec). Make sure we check the error bits first so we don't get any false positives. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-24[BLOCK] Get rid of request_queue_t typedefJens Axboe1-4/+4
Some of the code has been gradually transitioned to using the proper struct request_queue, but there's lots left. So do a full sweet of the kernel and get rid of this typedef and replace its uses with the proper type. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-20sdhci: make sure to clear the error interruptPierre Ossman2-0/+3
The controller has a bit indicating that one of the higher bits (the error bits) are set. A previous bug caused this bit to be masked, but since that bug has been fixed we have to clear it explicictly. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-20mmc: at91_mci: wakeup on card insertion (or removal)Marc Pignat1-1/+12
This piece of code enable the system to be wake-up by a card insertion or removal. Signed-off-by: Marc Pignat <marc.pignat@hevs.ch> Signed-off-by: Nicolas Ferre <nicolas.ferre@rfo.atmel.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-19some kmalloc/memset ->kzalloc (tree wide)Yoann Padioleau1-2/+1
Transform some calls to kmalloc/memset to a single kzalloc (or kcalloc). Here is a short excerpt of the semantic patch performing this transformation: @@ type T2; expression x; identifier f,fld; expression E; expression E1,E2; expression e1,e2,e3,y; statement S; @@ x = - kmalloc + kzalloc (E1,E2) ... when != \(x->fld=E;\|y=f(...,x,...);\|f(...,x,...);\|x=E;\|while(...) S\|for(e1;e2;e3) S\) - memset((T2)x,0,E1); @@ expression E1,E2,E3; @@ - kzalloc(E1 * E2,E3) + kcalloc(E1,E2,E3) [akpm@linux-foundation.org: get kcalloc args the right way around] Signed-off-by: Yoann Padioleau <padator@wanadoo.fr> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Acked-by: Russell King <rmk@arm.linux.org.uk> Cc: Bryan Wu <bryan.wu@analog.com> Acked-by: Jiri Slaby <jirislaby@gmail.com> Cc: Dave Airlie <airlied@linux.ie> Acked-by: Roland Dreier <rolandd@cisco.com> Cc: Jiri Kosina <jkosina@suse.cz> Acked-by: Dmitry Torokhov <dtor@mail.ru> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Acked-by: Pierre Ossman <drzeus-list@drzeus.cx> Cc: Jeff Garzik <jeff@garzik.org> Cc: "David S. Miller" <davem@davemloft.net> Acked-by: Greg KH <greg@kroah.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17Freezer: make kernel threads nonfreezable by defaultRafael J. Wysocki1-5/+2
Currently, the freezer treats all tasks as freezable, except for the kernel threads that explicitly set the PF_NOFREEZE flag for themselves. This approach is problematic, since it requires every kernel thread to either set PF_NOFREEZE explicitly, or call try_to_freeze(), even if it doesn't care for the freezing of tasks at all. It seems better to only require the kernel threads that want to or need to be frozen to use some freezer-related code and to remove any freezer-related code from the other (nonfreezable) kernel threads, which is done in this patch. The patch causes all kernel threads to be nonfreezable by default (ie. to have PF_NOFREEZE set by default) and introduces the set_freezable() function that should be called by the freezable kernel threads in order to unset PF_NOFREEZE. It also makes all of the currently freezable kernel threads call set_freezable(), so it shouldn't cause any (intentional) change of behaviour to appear. Additionally, it updates documentation to describe the freezing of tasks more accurately. [akpm@linux-foundation.org: build fixes] Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Nigel Cunningham <nigel@nigel.suspend2.net> Cc: Pavel Machek <pavel@ucw.cz> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Gautham R Shenoy <ego@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-12Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds1-22/+0
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (50 commits) [ARM] sa1100: remove boot time RTC initialisation [ARM] sa1100: stop doing our own rtc management over suspend [ARM] 4474/1: Do not check the PSR_F_BIT in valid_user_regs [ARM] 4473/2: Take the HWCAP definitions out of the elf.h file [ARM] pxa: move platform devices to separate header file [ARM] pxa: move device registration into CPU-specific file [ARM] pxa: remove boot time RTC initialisation [ARM] pxa: stop doing our own rtc management over suspend [ARM] 4451/1: pxa: make dma.c generic and remove cpu specific dma code [ARM] 4450/1: pxa: add pxa25x_init_irq() and pxa27x_init_irq() [ARM] 4440/1: PXA: enable the checking of ICIP2 for IRQs [ARM] 4438/1: PXA: remove #ifdef .. #endif from pxa_gpio_demux_handler() [ARM] 4437/1: PXA: move the GPIO IRQ initialization code to pxa_init_irq_gpio() [ARM] 4436/1: PXA: move low IRQ initialization code to pxa_init_irq_low() [ARM] 4435/1: PXA: remove PXA_INTERNAL_IRQS [ARM] 4434/1: PXA: remove PXA_IRQ_SKIP [ARM] pxa: Fix PXA27x suspend type validation, remove pxa_pm_prepare() [ARM] pxa: move pm_ops structure into CPU specific files [ARM] pxa: introduce cpu_is_pxaXXX macros [ARM] pxa: remove MMC register defines from pxa-regs.h ...
2007-07-12[ARM] pxa: remove MMC register defines from pxa-regs.hRussell King1-22/+0
pxamci.h redefines the MMC registers differently so they can be used with ioremap. Remove the incompatible definitions from pxa-regs.h. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-09mmc: at91_mci: fix hanging and rework to match flowchartsNicolas Ferre1-91/+108
Fixes hanging using multi block operations (seen during CMD25). Follows closely the datasheet flowcharts. This piece of code handles better big file writing. I had to take care of the notbusy signal during write (at91_mci_handle_cmdrdy function) and to rearrange the AT91_MCI_ENDRX and AT91_MCI_RXBUFF flag usage. Signed-off-by: Nicolas Ferre <nicolas.ferre@rfo.atmel.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-09mmc: at91_mci typoNicolas Ferre1-15/+15
Typo fix in at91_mci driver : standardized the typo (at91_mci everywhere) Signed-off-by: Nicolas Ferre <nicolas.ferre@rfo.atmel.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-09sdhci: Fix "Unexpected interrupt" handlingRolf Eike Beer1-1/+1
Whenever a power interrupt is signaled it is also reported as an unexpected one. All other unexpected interrupts get lost. Cause is a not inversed bitmask to remove power interrupts from the status. Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-09mmc: fix silly copy-and-paste errorPierre Ossman1-3/+3
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-09mmc: move layer init and workqueue to core filePierre Ossman3-56/+48
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-09mmc: refactor host class handlingPierre Ossman7-164/+187
Move basic host class device handling to its own file for clarity. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-09mmc: refactor bus operationsPierre Ossman9-244/+418
Move bus operations to its own file for the sake of clarity. Also delegate sysfs attributes to bus handlers in preparation for other more exotic types. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-09sdhci: add ene controller idMilko Krachounov1-0/+8
ENE has a very weird design where an SDHCI device (0805) is presented on the PCI bus, but that device is non-functional, and the real device is hidden as a more generic device. Signed-off-by: Milko Krachounov <milko@3mhz.net> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-09mmc: bounce requests for simple hostsPierre Ossman4-15/+208
Some hosts cannot do scatter/gather in hardware. Since not doing sg is such a big performance hit, we (optionally) bounce the requests to a simple linear buffer that we hand over to the driver. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-06-13mmc: get back read-only switch functionPierre Ossman1-0/+15
Somehow the code to read the read-only switch of SD cards got lost in the reorganisation. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-06-13mmc-omap: fix sd response type 6 vs. 1Ragner Magalhaes1-21/+3
Ignoring OMAP_MMC_STAT_CARD_ERR, treating it as if the command completed correctly. Signed-off-by: Ragner Magalhaes <ragner.magalhaes@indt.org.br> Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-06-07mmc: don't call switch on old cardsPierre Ossman1-4/+20
Make sure we don't call the switch function on cards too old to support it. They should just ignore it, but some have been reported to lock up instead. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-06-07mmc: fix broken if clausePierre Ossman1-1/+1
Fix a broken if clause which was causing SD cards to go into 4-bit mode even if the host did not support it. (Reported by David Brownell and Marc Pignat) Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-06-07au1xmmc: Replace C code with call to ARRAY_SIZE() macro.Robert P. J. Day1-2/+1
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-06-07mmc-atmel: remove linux/mmc/protocol.h dependenciesMarc Pignat1-3/+2
Fix compilation error by removing command decoding from at91_mci.c driver. Decoding commands in the host driver is the wrong way. Signed-off-by: Marc Pignat <marc.pignat@hevs.ch> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-24mmc: clean up unused parts of block driverPierre Ossman3-53/+8
Remove dead code and unused structs from the block driver. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-14pxamci: fix PXA27x MMC workaround for bad CRC with 136 bit responseNicolas Pitre1-12/+6
... and make it depend on the response flag instead of the command type. Signed-off-by: Nicolas Pitre <npitre@mvista.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-14mmc: use assigned major for block devicePierre Ossman1-13/+4
The MMC block devices now have an assigned major. Make sure we actually use it. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-14sdhci: handle dma boundary interruptsPierre Ossman1-0/+9
When the device hits certain memory boundaries, it signals an interrupt and expects to be serviced. We don't need the feature but we need to make sure the device doesn't stall. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-14mmc: au1xmmc command types check from data flagsYoichi Yuasa1-21/+14
This patch has changed command types check from data flags. MMC_STOP_TRANSMISSION is never passed to au1xmmc_send_command(). SEND_STOP() is used for MMC_STOP_TRANSMISSION. Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-10[S390] Kconfig: menus with depends on HAS_IOMEM.Martin Schwidefsky1-0/+1
Add "depends on HAS_IOMEM" to a number of menus to make them disappear for s390 which does not have I/O memory. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-17 06:39:24 +0000